Bug fix and improvement.
Description:
The test output were not displayed for parallel tests.
The serial tests output were always displayed whether the test was
actually ran this time or not.
Solution:
Moved the display of test output inside the target where the actual
tests are run.
Platforms tested:
Tested in heping using pp and fortran.
Bug fix and code minor cleanup.
Description:
The attempt to redirect stderr together to the log files were
done in the wrong order such that stderr output goes to where
stdout WAS. Fixed that.
Code minor cleanup--use shell variables to hold the name of the
log file and the test instead of generating them repeatedly. This
makes easier code reading, less crowded and avoid typos.
Only conclude.in is changed. The Makefile.in changes are all
derived from automake.
Platforms tested:
h5committested.
Misc. update:
Makefile feature
Description:
'make check-clean' now cleans *.h5 files created by tests as well as
.log and .chkexe files.
Solution:
check-clean is now a separate target in its own right, which cleans less
than mostlyclean (check-clean < mostlyclean < clean < distclean).
Platforms tested:
mir, heping, modi4 (serial and parallel)
Feature: check-clean target
Description:
'make check-clean' cleans up output files from tests.
Solution:
Tests create foo.chkexe and foo.log files. Scripts create foo.chksh and
foo.logsh files. 'make check-clean' will clean these files up so that
the tests can be re-run.
Also suppressed some not-very-useful output of Makefiles when it would
echo commands.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Configuration feature
Description:
Serial test output is now stored in log files and printed when all tests
in a directory complete, or when a test fails. This should make test output
more readable and useful.
Also made changes to clean up ii_files directories that are created by some
C++ compilers/linkers.
Also fixed a few minor Makefile bugs.
Solution:
When serial tests run, their output is saved in *.log or *.logsh. While
running, tests only print when they begin and when they complete; their
more specific output (from the log file) is printed if the test fails or
when all tests have completed.
Comments welcome.
Platforms tested:
mir, modi4 (parallel and serial), copper, shanti
Bug fixes
Description:
A number of minor changes to Makefiles. Some files will now be cleaned
properly, some comments are more informative, etc.
Platforms tested:
heping, mir, modi4
Bug fix
Description:
The ".chksh" file for a test script was being created in the "source"
location rather than the build location. This can cause problems when
multiple builds are running because "slower" machines will see the ".cshsh"
file from faster machines and will not run the test script as they should.
Solution:
Use 'basename' command to strip off the path of the script and create
the ".chksh" file in the build location.
Platforms tested:
FreeBSD 4.11 (sleipnir)
h5committest
bug fix.
Description:
-nt is not a universal option for the test command in all platforms.
The use of it in conclude.am cause some platforms to bark at the
Makefile generated.
Solution:
Created a command script bin/newer which tests if file1 is newer
than file2. Replace the "test file1 -nt file2" by
"newer file1 file2".
Platforms tested:
Tested in sol.
Bug fix
Description:
Added dependencies to examples Makefiles so that examples can be run in
parallel.
Solution:
The examples directories (for C, C++, and Fortran) all have some dependencies
explicitly spelled out in their Makefiles.am. This is a good short-term
solution, and should prevent errors in the Daily Tests.
Platforms tested:
mir, modi4 (parallel and sequential)
Bug fix
Description:
Fixed bugs that caused tests to be unable to find testhdf5.sh during
daily tests, and another that broke sol and shanti.
Solution:
When tests are run, their path is ./$testname .
When scripts are run, their path has no leading "./". Fixed.
Sol and shanti don't recognize the -e option for test, but they do know
-f. Fixed.
Also modified release notes.
Platforms tested:
mir, shanti, heping
Feature: tests now use parallel make and only run once
Description:
When make is invoked in parallel (using the -j option), several tests will
now be run simultaneously. This should speed up testing on a number of
systems.
When a test passes, it creates a foo.chkexe or foo.chksh file, which prevents
the test from running again unless the test or library changes.
Solution:
Most of the changes live in config/conclude.am. Added *.chkexe and *.chksh
files to the list of files to be cleaned at "make mostlyclean" time.
Parallel tests still run one at a time, but use the same make instructions
as serial tests.
Platforms tested:
mir, eirene, sleipnir, pommier, copper, modi4 (some errors occurred, probably
due to the test being run before updating hdf5. Will re-run tests after
checkin.)
bug fix
Description:
check-s and check-p were set as pre-requistics of test. They
would get executed in parallel if parallel make is used. This
could cause problems since serial tests are used to be executed
before parallel tests. It is not known if it is always okay to
run serial and parallel tests in simultantously.
Solution:
Change check-s and check-p as actions of the target test so
that they get executed sequnentially.
Platforms tested:
heping PP.
Added check-s and check-p targets.
Description:
Added check-s and check-p targets to 1.7 branch to match changes to 1.6
branch. Now parallel and serial tests can be run separately.
Platforms tested:
mir, modi4, copper
Description: Removed support for SRB driver
Solution: Removed or modified appropriate files; ran reconfigure
to regenerate Makefile.in and configure files.
Platforms tested: heping and shanti
Misc. update: ran bin/chkmanifest on heping
Configuration feature
Description:
Different Fortran compilers mangle function names in different ways
(upper case, lower case, adding underscores). To link between
Fortran and C functions, we need to know what a given function's
name is under a given compiler.
Solution:
Use autoconf's FC_WRAPPERS check to determine the Fortran
naming scheme and define the FC_FUNC_ macro to name our
functions (in H5f90proto.h). Removed references to
our old FNAME macro, as well as flags that indicated whether
function names were upper or lower case.
Platforms tested:
mir, pommier, modi4, copper, more
Bug fix
Description:
On some machines, $RUNSERIAL variable needs to be used to run
tests. Set $RUNTESTS (which is used for non-parallel tests) to
be $RUNSERIAL in configure.am.
Also, since I was updating all Makefiles.in anyway, I updated
commence.am to point to autotools installs in AFS instead of
those on heping.
Platforms tested:
mir, sleipnir, modi4, copper
Purpose:
"Bug fix"
Description:
Hardcoded Makefiles to use /bin/sh instead of letting configure
detect shell automatically. This is what v1.6 does, and avoids
problems on janus.
Platforms tested:
sleipnir, copper, modi4, mir
Feature - conditional compilation
Description:
SRB file driver and tests are now compiled only when SRB is enabled
(using --with-srb during configure).
Solution:
Added an automake conditional in configure.in, altered Makefiles.am in
src and test directories to depend on that conditional.
This should make a nice example for posterity to add conditionally
compiled sources.
Platforms tested:
heping (only configure change)
Purpose:
Added C++ wrapper for Packet Table API.
Description:
Added macro for high-level C++ library (LIBH5CPP_HL), which changes every
Makefile.in.
Added directories for high-level C++ library (though currently only Packet
Table API is supported).
Added both C++ source and tests.
Platforms tested:
sleipnir, mir, modi4
Misc. update:
Automake version upgrade
Description:
Upgraded automake version from 1.6.2 to 1.9.5.
Changed bin/reconfigure script to use automake 1.9.5.
Changed configure.in and Makefiles to use new FCFLAGS and FC variables
instead of FFLAGS and F9X.
Automake and configure should now do the lion's share of the work
supporting Fortran 9X; macros in acsite.m4 are now mostly unused (will
be cleaned later).
Altered how configure handles pmake; now root-level Makefile.in is
processed by bin/reconfigure to have a .MAKEFLAGS target, since
automake no longer allows us to define unused variables.
Configure now always checks for C++ compiler even if it is not
used, since automake thinks this is the Right Thing To Do and
will break otherwise.
Platforms tested:
Sol, copper, heping, mir, sleipnir, eirene, pommier, kelgia, modi4.
Removed GASS configuration and software packages associated with
it. The following software are no longer configurable.
checking for main in -lcrypto... yes
checking for SSL_get_version in -lssl... yes
checking globus_common.h usability... yes
checking globus_common.h presence... yes
checking for globus_common.h... yes
checking for globus_module_activate in -lglobus_common... yes
checking for main in -lglobus_gass_cache... yes
checking for main in -lglobus_gaa... yes
checking for main in -lglobus_gss... yes
checking for main in -lglobus_gss_assist... yes
checking for main in -lglobus_io... yes
checking for main in -lglobus_gass_transfer_assist... yes
checking for main in -lglobus_gass_transfer... yes
checking for globus_gass_open in -lglobus_gass_file... yes
Platforms tested:
h5committested (but copper was down.) tested in modi4 too.
Purpose:
Bug fix
Description:
modi4 dies during build with strange errors.
The root cause of these is a two-year-old hack in HDF5's libtool
script that only takes effect on IRIX.
Solution:
Edited the libtool hack (by editing ltmain.sh) to correct a bug in
the hack.
Also made sure that compiler-specific DEFAULT_LIBS are used
when linking.
Platforms tested:
sleipnir, copper, modi4, sol
Bug fix
Description:
pmake (on modi4, for instance) complains about undefined variables
if it is run without the -V flag, which turns those errors to warnings.
Solution:
Added test to configure.in to see if $MAKE will allow Makefiles
with undefined variables. If not, sets -V flag in AM_MAKEFLAGS.
Ensured that all custom make targets use AM_MAKEFLAGS.
Also defined all variables that caused errors in top-level Makefile.am.
This means that pmake can be used to build hdf5 *from the top level
only*. To run make from a subdirectory, still need to use -V flag
(or use make or gmake).
Platforms tested:
modi4, heping, copper, sleipnir
Purpose:
Bug fix
Description:
Parallel builds were breaking in tools/lib
Solution:
talign didn't realize it depended on libh5tools.la because its
dependencies listed the full path (../../tools/lib/libh5tools.la).
Changed this, and made similar changes in a couple of other
directories.
This checkin should also add the --foreign flag to every Makefile.in
Platforms tested:
sleipnir (minor change)
New feature
Description:
Add basic code for new B-tree implementation. They don't do much yet,
aren't hooked up to anything yet and the format may change, but I'd like to
start getting them into the daily tests.
Platforms tested:
FreeBSD 4.11 (sleipnir) w/parallel
Too minor to require h5committest
Bug fix
Description:
Found the permanant fix to automake/CVS dependency problem
Solution:
Added AM_MAINTAINER_MODE macro to configure.in.
Now automake will never try to regenerate Makefiles, Makefiles.in,
configure, H5config.h, etc. when they are out of date, nor will it
print any warnings.
Developers should be very very careful to use reconfigure script,
and can add --enable-maintainer-mode flag to configure on heping
to regenerate these files correctly.
Platforms tested:
heping sleipnir copper
Bug fix
Description:
Configuration files' timestamps were incorrect.
Solution:
Update Makefiles.in. Also added correct paths to autotools on heping,
so heping build should be able to re-generate configuration files even
if they are still broken.
Platforms tested:
sleipnir
Bug fix
Description:
Dependencies between configure files (aclocal, configure.in, configure,
Makefiles.am and .in) are still causing Makefiles to try to run autotools
during build.
Solution:
Committed all Makefiles.in to update their timestamps.
As a temporary measure, forcibly prevented automake from running
autotools during build by redefining the variables it uses.
Platforms tested:
sleipnir (No changes to Makefile content)
Bug fix
Description:
Different compilers use different flags to include Fortran module files
Solution:
Changed boilerplate to use configure variable rather than hardcoded -M flag.
Platforms tested:
sleipnir, sol, copper
Configuration feature
Description:
HDF5 now uses automake to generate Makefiles
Solution:
Makefile.in files are now generated from Makefile.am files.
To reconfigure (after chaning a Makefile.am or configure.in):
/bin/sh bin/reconfigure.sh
Platforms tested:
Many
Added data transform example
Description:
Added example code for the data dtransform
Solution:
This code both illustrates how data transform works and shows how to use it.
Examples of data transform on read, write, and both at the same time.
Also shows usage of H5Pget_data_transform
Platforms tested:
eirene + copper
Misc. update:
Bug fix
Description:
The examples would compile even if some header file were not
installed. That was because the CPPFLAGS has -I... components
that included the src directories.
Solution:
The h5cc or h5pcc commands should have all the necessarily
library include directories covered. Changed CPPFLAGS to
search only the examples source directory for local header
files.
Platforms tested:
No h5committest tests which do not check examples.
Hand tested it in sol.
Bug fix
Description:
Hack on include paths some more to make srcdir builds work correctly with
the [broken] dependency generation from the Intel 7.1 C compiler.
Platforms tested:
Linux 2.4 (titan) w/srcdir build
Too minor to require h5committest
Bug fix
Description:
Added directory where actual source code is located to allow broken Intel
C 7.1 compiler to generate dependencies correctly.
Platforms tested:
Linux 2.4 (titan)
too minor to need h5committest
Bug fix.
Description:
"make check" failed because the macro "$<" is not known to those
makes.
Solution:
Replace that macro with a string name in the form of a more basic
macro of "$@".
Platforms tested:
h5committested (copper used make.)
Misc. update:
Improvement
Description:
If the library is built in parallel mode, then name the "h5cc" and
"h5fc" programs "h5pcc" and "h5pfc" resp. This saves the user from
worrying about mixing serial and parallel builds of the library and
having to specify the pathnames and so-forth.
Platforms tested:
Linux (w/ parallel & Fortran)
Modi4 (w/ parallel & Fortran)
Sol (Serial & Fortran & C++)
Misc. update:
Updated release/docs/RELEASE
Updated the copyright notice--mostly by rearranging
some text to make them consistent.
Solution:
Platforms tested:
"h5committested"--sol is down, so, no SUn test.
Misc. update:
Code Cleanup
Description:
Warning messages were being produced by the "make" program because
the "docdir" was being specified twice as a target in the generated
Makefiles. This is because the "EXAMPLESDIR" was also defined as
"docdir".
Solution:
Made "EXAMPLESDIR" unique for C, Fortran, and C++ in the commence.in
file and removed EXAMPLESDIR from the Makefile.ins
Platforms tested:
Dangermouse (only affects make system, not code).
Misc. update:
Bug Fix
Description:
Making of the programs when using the --srcdir option didn't work. It
couldn't find the files to compile.
Solution:
Specified where the files are by prepending the $(srcdir) macro to
them.
Platforms tested:
Linux
Bug Fix
Description:
Ported the bug fix for h5cc failing on platforms from the 1.4 branch
to 1.5 branch. In a nutshell, when we ran "make check" in the
examples directory, libtool would get in the way trying to compile
things to .lo for us. but we didn't want libtool to do this.
Solution:
Made it so that make check will compile only the .c files to
executables without the intervening .lo stage...
Platforms tested:
Linux (Dangermouse and Platinum)
Feature
Description:
Change examples to use the installed h5cc to compile the examples
programs. That will test the correctness of the installed software.
Removed examples from make targets in the top level so that it does
not get invoked in make or make check since one cannot compile
the example programs until after "make install" has completed.
Platforms tested:
eirene and modi4 (parallel)
Bug fix
Description:
$TEST_PROG_PARA was included in the serial tests.
$TEST_PROG_PARA was not dependent on $LIBHDF5 (it should.)
Solution:
Adjusted the file to fix both problems.
Platforms tested:
eirene (pp, linux 2.2.), dangermouse (pp, linux 2.4)
modi4 (pp, -64) and modi4 serial (to verify that ph5example was not
tested at all.)
Purpose:
Feature Add
Description:
Added "install-example" and "install-all" to the Makefile system.
The behaviour of the "make install*" options:
make install - Installs binaries, libraries, include
files, and example programs.
make install-examples - Installs only the example programs.
The directories are:
${prefix}/doc/hdf5/examples/{c,c++,fortran}
make install-all - Install the binaries, libraries, include
files, example programs, and
documentation. The whole kit-n'-caboodle.
make uninstall-examples - Get rid of those example files (but not
the ${prefix}/doc/hdf5/examples/...
directories)
There's a new bin/ program which helps create directories which are
deeply nested called "mkdirs". It's a simple shell script.
Platforms tested:
Linux
Feature
Description:
Added an example program showing how to use different virtual
file drivers. First example is to show the Split File driver.
Platforms tested:
eirene.
bug fix
Description:
The last reported problem that the parallel example program
in examples could not be compiled, could not be duplicated
again. I guessed maybe Rushad mistook the compile warning
messages as error messages. Just a guess.
Furthermore, the changed examples/Makefile.in and configure.in,
did not work for the parallel case. The examples/ph5example.c
was never included for compiling.
Solution:
Removed the fix in configure.in, put ph5exmple directly back
in the examples/Makefile.in but put it in a variable for
easier future maintenance. Also, easier to identify the
parallel examples too.
Platforms tested:
Eirene, both serial and parallel modes.
