----------------------
./MANIFEST
Added tcompound2.{dmp,h5} and tdset2.{dmp,h5} used by the
h5toh4 testing.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Added check for <sys/timeb.h> for Win32.
Determines sizeof(char) just so we have a complete list of
type sizes defined as preprocessor symbols.
./src/H5detect.c
./src/H5T.c
./src/H5Tpkg.h
Detects alignment constraints. In order for this to work the
operating system must not correct unaligned data (for
instance, on the DEC Alpha one might need to say `uac p
sigbus' before running H5detect).
./src/H5private.h
Includes <signal.h> because it's needed by H5detect.c to
detect alignment constraints.
./src/H5Tconv.c
Added extra checks to all hardware conversion functions so
they align data when necessary before the conversion. This
slows down the conversions somewhat but they're still much
faster than the software conversions.
./test/dtypes.c
By setting a constant at the top of the source you can test
conversions where the data is aligned on various byte
boundaries.
By setting a constant at the top of the source you can
simulate architectures that have alignment constraints on
architectures that don't.
Changed typo SIZEOF_LDOUBLE to SIZEOF_LONG_DOUBLE in a few
places.
----------------------
./src/H5T.c
Fixed a typo in the registration of the `unsigned char' to
`unsigned long long' type conversion that caused it to not be
registered, falling back to software whenever that conversion
path was taken.
./MANIFEST
./test/Makefile.in
./test/testhdf5.c
./test/testhdf5.h
./test/theap.c [REMOVED]
./test/lheap.c [NEW]
./test/tohdr.c [REMOVED]
./test/ohdr.c [NEW]
./test/tstab.c [REMOVED]
./test/stab.c [NEW]
Removed the `t' from the front of these names and made each
test a stand-alone program following the format of most of the
other tests.
./test/big.c
Uses libh5test.a but always sets the low-level driver to 1GB
file family.
The `#if' near the top to set the data space to 8GB has been
simplified now that `long_long' is always defined and the
error message is improved when `long_long' isn't wide enough.
Cleanup code was added to the error handling.
./test/gheap.c
./test/istore.c
Uses libh5test.a. Added error cleanup code.
./test/dtypes.c
./test/h5test.c
Added 68 new tests that check hardware and software
conversions between `long long' and `unsigned long long' and
the other integer types. The tests only run on machines where
sizeof(long_long)!=sizeof(long). We test a total of 180
different integer conversions, half in hardware and half in
software.
Cut down the number of times each test is run from 5 to 1 so
it doesn't take so long. If you want to run more times
there's a constant that can be changed at the top of the file.
./test/extend.c
Removed unused variable.
./test/h5test.c
./test/h5test.h
./test/external.c
./test/fillval.c
The h5_cleanup() returns true/false so it can be used in an `if'
statement to clean up additional files.
./doc/html/Environment.html
Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions.
./src/H5P.c
Changed the trace type for the second argument from `Iu' to
`x' since it's an output parameter.
./INSTALL
Added a warning that the GNU zlib that comes with the latest
version of HDF4 is too old to use with HDF5 and must be
renamed so configure doesn't see it when `--enable-hdf4' is
used.
----------------------
./src/H5Tconv.c
With my poor eyesight I missed the definitions of SCHAR_MIN
and SCHAR_MAX in <limits.h> and used CHAR_MIN and CHAR_MAX
incorrectly. I changed all occurrences of the latter to the
former and the new hardware integer type conversions now work
on Irix.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5private.h
./src/H5.c
./test/h5test.c
Added a wrapper for HDsnprintf() that just calls sprintf() if
snprintf() isn't available.
./MANIFEST
Added Paul's new h5toh4 files.
----------------------
./MANIFEST
./test/Makefile.in
./test/shtype.c [REMOVED]
Removed shtype.c because it was all commented out. Besides,
these tests are done in dtypes.c now anyway.
./test/external.c
./test/fillval.c
./test/flush1.c
./test/flush2.c
./test/links.c
./test/mount.c
./test/mtime.c
./test/unlink.c
The tests that check the HDF5 API use the h5test support
functions. For one thing, that means that you can specify the
file driver that thay use by the HDF5_DRIVER environment
variable. Possible values are:
HDF5_DRIVER='sec2' Use read() and write()
HDF5_DRIVER='stdio' Use fread() and fwrite()
HDF5_DRIVER='core' Use malloc() and free()
HDF5_DRIVER='split' Split meta and raw data
HDF5_DRIVER='family N' Use file families with each
member being N megabytes (N
can be fractional, defaults to
one).
Some tests might fail for certain drivers: for instance, the
mount and link tests fail for the `core' driver because
they must be able to close and then reopen a file.
----------------------
./src/H5.c
./src/H5A.c
./src/H5AC.c
./src/H5B.c
./src/H5D.c
./src/H5E.c
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gstab.c
./src/H5HG.c
./src/H5HL.c
./src/H5I.c
./src/H5Iprivate.h
./src/H5MF.c
./src/H5MM.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5Sselect.c
./src/H5T.c
./src/H5TB.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5V.c
./src/H5Z.c
./src/H5detect.c
./src/H5private.h
Most of these changes are because the `interface_initialize_g'
variable change from hbool_t to int. It's a one line change.
Changed the way the library is closed so we have more control
over the order the interfaces are shut down. Instead of
registering an atexit() function for every interface in some
haphazard order we just register one: H5_term_library() which
then calls the H5*_term_interface() functions in a
well-defined order.
If the library is closed and then reopened repeatedly by
calling H5close() and H5open() in a loop we only add one copy
of the library termination functions with atexit().
Termination is a two-step process in order to help detect
programming errors that would cause an infinite loop caused by
the termination of one interface waking up some other
previously terminated interface. The first step terminates
the interface and *marks it as unusable*. After all
interfaces are terminated then we mark them all as usable
again. The FUNC_ENTER() macro has been modified to return
failure or to dump core (depending on whether NDEBUG is
defined) if we try to call an interface while it's shutting
down.
./src/H5.c
The H5dont_atexit() function returns failure if it's called
more than once or if it's called too late. However, the error
stack is not automatically printed on failure because the
library might not be initialized yet
./test/chunk.c
./test/flush1.c
./test/flush2.c
./test/iopipe.c
./test/overhead.c
./test/ragged.c
Changed the extra cast for Win32 so we do floating point
division again -- it was just confusion about precedence and
associativity of casting and the C coercion rules. Removed
extra carriage returns inserted by broken operating system.
./src/H5Ffamily.c
Fixed an bug where H5F_fam_write() lowered the EOF marker for
one of the family members causing H5F_fam_read() to read
zeros.
./test/h5test.h [NEW]
./test/h5test.c [NEW]
./test/Makefile.in
./test/bittests.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
Support library for test files. This isn't done yet but
Katie's contractions are ~10 minutes apart so I figured I
better back this stuff up just in case I'm not here next
week...
Eventually all test files will understand HDF5_DRIVER to name
the low level file driver and parameters so we can easily test
various drivers. They will also understand HDF5_PREFIX to
prepend to the beginning of file names which is necessary for
testing ROMIO with various drivers. Also, the cleanup function
will know how to use the file name prefix and will understand
different file driver naming schemes like file families. I'm
not sure they'll understand the `gsf:' type prefixes yet.
Note, the external test is completely commented out because
I'm in the middle of modifying it. It will still compile and
run but it doesn't test anything at the moment.
----------------------
./INSTALL
Added instructions about specifying a path for GNU zlib and
HDF4 headers and library.
Added comments for each of the tool names. Added h5toh4 as a
tool name.
./configure.in
./conigure [REGENERATED]
./src/H5config.h.in [REGENERATED]
The config/* scripts get invoked with $CC_BASENAME set the
base name of the compiler in order to make it easier to handle
setting compiler flags for different compilers in a big case
statement. For instance, if $CC has the value
/usr/local/mpi/bin/mpicc -ansi -64
then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not
set if $CC is not set.
Fixed alignment in `configure --help'.
An include and/or library path can be specified for GNU zlib
if configure can't find it in normal places. The "normal"
means wherever your compiler normally searches, including
search paths you've added through environment variables like
CPPFLAGS and LDFLAGS. The INSTALL file has instructions.
The `-ljpeg' library is detected.
If `ssize_t' is not found then a #define is added to
H5config.h similar to what we already do for `size_t'.
We detect the hdf5 header file `mfhdf.h' and libraries
`-lmfhdf' and `-ldf' and if found define the H5TOH4 and
TESTH5TOH4 Makefile variables. The user can specify an
include and/or library path. The INSTALL file has
instructions.
The `RUNTEST' variable has been split into `RUNSERIAL' and
`RUNPARALLEL' because these are different commands. The
makefile still uses `RUNTEST', which defaults to the RUNSERIAL
value. The new testpar/Makefile.in sets RUNTEST to the
RUNPARALLEL value. The default RUNSERIAL value is empty and
the default RUNPARALLEL value is `mpirun -np 2'. These can
both be overridden in the config/* files. To make the value
the empty string set it like `RUNPARALLEL=none' in the
config/* file.
The new testpar/Makefile is generated from testpar/Makefile.in
./config/commence.in
Added the RUNSERIAL and RUNPARALLEL makefile definitions.
./src/Makefile.in
The `H5detect' program is run with RUNSERIAL, which is empty
on all platforms except intel-osf1 (ASCI/Red)
./config/conclude.in
Removed the `.c.a:' implicit rule -- we don't use it any more.
./config/BlankForm
./config/alpha-dec
./config/alpha-dec-osf4.0
./config/freebsd2.2.7
./config/hpux10.20
./config/hpux9.03
./config/intel-osf1
./config/irix5.3
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
All of these files have been updated to hande multiple
compilers. Most of them assume `cc' if CC is not set. The
documentation in `BlankForm' has been updated and
documentation in the other files refer to `BlankForm'.
The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra
library search paths.
./examples/Makefile.in
./test/Makefile.in
./tools/Makefile.in
Simplified by grouping some dependency information together
more succinctly.
The tools Makefile.in has been modified to work with the
`h5toh4' and `testh5toh4' programs. Until Paul checks these
in you may have problems compiling. If so, just create files
h5toh4.c and testh5toh4.c that contain:
#include <stdio.h>
int main(int argc, char *argv[]) {
fprintf(stderr, "%s: not implemented\n", argv[0]);
return 1;
}
./src/H5public.h
Removed definition for `ssize_t' since this is now handled by
configure in H5config.h with a #define.
./MANIFEST
./testpar/Makefile.in [NEW]
Added a makefile for parallel tests. As soon as we get this
working properly we can remove the other four makefiles in
that directory and maintain just one.
----------------------
./MANIFEST
Added new Pablo files HDF5record_RT.h and ProcIDs.h
./acconfig.h
./configure [REGENERATED]
./configure.in
./src/H5.c
./src/H5Vprivate.h
./src/H5config.h.in [REGENERATED]
./src/H5private.h
./src/H5public.h
./test/big.c
Added more configuration stuff for the Win32 environment. Removed all
the #ifdef WIN32 from the source and replaced them with OS-independent
stuff. Specifics follow:
Check for non-Posix.1 `st_blocks' field in `struct stat' which is used
by the big file test to decide if the file system supports holes. If
the st_blocks field isn't present then we just skip the test.
Configure checks for <io.h> <sys/resource.h> <sys/time.h> and
<winsock.h> and defines HAVE_IO_H, HAVE_SYS_RESOURCE_H,
HAVE_SYS_TIME_H and HAVE_WINSOCK_H when they're found.
Configure checks whether both <sys/time.h> and <time.h> can be
included and defines SYS_TIME_WITH_TIME if so. Otherwise include only
<sys/time.h> or <time.h> even if both exist.
Configure checks sizeof(__int64) and defines SIZEOF___INT64 to the
result or to zero if __int64 isn't defined. The source uses `long
long' in preference to `__int64'.
Removed null WIN32 definition for `inline' since such a definition
already exists in H5config.h
Protected gettimeofday() calls in debugging code with
HAVE_GETTIMEOFDAY instead of WIN32.
./src/H5F.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fstdio.h
./src/H5P.c
./src/H5Tconv.c
./src/H5private.h
Removed #include of system files from library source files and
consolodated them into H5private.h where they're protected by various
configuration macros (most of them were duplicated there already
anyway).
./test/big.c
./test/chunk.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
./test/fillval.c
./test/flush1.c
./test/flush2.c
./test/iopipe.c
./test/links.c
./test/mount.c
./test/mtime.c
./test/overhead.c
./test/ragged.c
./test/shtype.c
./test/unlink.c
Protected system #include's with #ifdef's from H5config.h.
Undefined NDEBUG since some of the tests rely on assert() to check
return values.
Removed WIN32 definitions for __unused__ since this can be controlled
by the definition of HAVE_ATTRIBUTE in H5config.h
./test/testhdf5.h
Removed the CLEAN_CMD definition because we no longer use it.
Albert's cleanup() functions replaced it.
./test/fillval.c
Initialized auto hid_t variables to fix warnings in error recovery
code when data flow analysis is turned on in compilers.
./test/h5tools.c
Initialized an auto variable to fix a compiler warning.
./test/chunk.c
./test/ragged.c
The WIN32 had some unsigned variables changed to signed because the
compiler generates warnings when coercing unsigned to double(?). I
changed them back to unsigned because they really are unsigned
quantities. If this the change was just to shut up extraneous warnings
then perhaps a compiler flag can do the same; otherwise if the
compiler generates bad code then we should supply a patch file instead
messing up source code with bug work-arounds.
./src/H5detect.c
Protected system #include's with #ifdef's from H5config.h thereby
removing a WIN32.
If getpwuid() doesn't exist (HAVE_GETPWUID) then we assume that
`struct passwd' doesn't exist either (we don't really need it in that
case).
The H5T_NATIVE_LLONG and H5T_NATIVE_ULLONG are defined in terms of
`long long' or else `__int64' or else `long' depending on what's
available.
./src/H5Flow.c
./src/H5Ofill.c
Added __unused__ to some function arguments that aren't used when
assertions are turned off.
./src/H5V.c
Changed an auto variable name in some hand-inlined code to get rid of
a warning about the variable shadowing a previous auto.
hdf5/doc/html/RM_H5I.html
hdf5/doc/html/RM_H5R.html
hdf5/doc/html/References.html
Labelled all files in hdf5/doc/src/ as "do not distribute."
Added hdf5/doc/html/DDL.html, but labelled as "do not distribute."
----------------------
./MANIFEST
./test/th5s.h5 [NEW]
./test/th5s.c
Added a test to make sure that creating a data space with too
large a rank fails.
Added a test to make sure that reading a file that has a
dataset with a space with too large a rank fails. Actually,
this one is a little weird: the code that reads the data space
message assumes the space is scalar if the message cannot be
read. Fortunately the layout message fails also, preventing
the dataset from being opened. However, since the data type
message is still visible h5ls will report that the object is a
named data type.
./test/space_overflow.c [NEW]
This is the little program that makes the th5s.h5 file.
./src/H5A.c
./src/H5R.c
./src/H5Sselect.c
Updated trace info.
./src/H5Olayout.c
./src/H5Osdspace.c
Added code to fail if the dimensionality is too large when
decoding a layout or simple data space message.
./src/H5Oprivate.h
Redefined H5O_LAYOUT_NDIMS in terms of H5S_MAX_RANK.
./src/H5P.c
./src/H5S.c
Check for ndims>H5S_MAX_RANK in API function calls, added
assert to internal functions.
./src/H5V.c
Changed a `<' to an `<=' in an assert.
./test/flush2.c
Includes stdlib.h for getenv().
./tools/h5tools.c
Able to handle up to H5S_MAX_RANK dimensions during output.
----------------------
./MANIFEST
./test/Makefile.in
./test/flush1.c [NEW]
./test/flush2.c [NEW]
Test to see if calling H5Fflush() results in a consistent
file.
./src/H5.c
./src/H5A.c
./src/H5D.c
./src/H5Fistore.c
./src/H5I.c
./src/H5S.c
./src/H5Shyper.c
./src/H5Sselect.c
./src/H5TB.c
Changed comparisons against SUCCEED and FAIL to >=0 and <0 in
about 15 places.
./src/H5.c
./src/H5V.c
./src/H5detect.c
./src/H5private.h
./src/H5public.h
./test/big.c
./test/chunk.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/external.c
./test/fillval.c
./test/iopipe.c
./test/links.c
./test/mount.c
./test/mtime.c
./test/ragged.c
./test/shtype.c
./test/unlink.c
Removed ^M from the end of lines inserted on broken OS's ;-)
./src/H5private.h
Changed c++ comments to c comments.
./src/H5R.c
Added tracing macros.
----------------------
./MANIFEST
./doc/html/study.html [DELETED]
./doc/html/study_1000x1000.gif [DELETED]
./doc/html/study_250x250.gif [DELETED]
./doc/html/study_499x499.gif [DELETED]
./doc/html/study_5000x1000.gif [DELETED]
./doc/html/study_500x500.gif [DELETED]
./doc/html/study_p1.gif [DELETED]
./doc/html/study_p1.obj [DELETED]
Removed these old files -- the data was from before the chunk
cache was implemented and therefore the whole file was pretty
much garbage.
./MANIFEST
./doc/html/Chunking.html [NEW]
./doc/html/Chunk_f1.gif [NEW]
./doc/html/Chunk_f1.obj [NEW]
./doc/html/Chunk_f2.gif [NEW]
./doc/html/Chunk_f2.obj [NEW]
./doc/html/Chunk_f3.gif [NEW]
./doc/html/Chunk_f4.gif [NEW]
./doc/html/Chunk_f5.gif [NEW]
./doc/html/Chunk_f6.gif [NEW]
./doc/html/Chunk_f6.obj [NEW]
New documentation for chunking. It's not quite complete but
it gives a pretty good idea of some of the issues affecting
performance.
----------------------
./src/H5.c
Fixed a signed vs. unsigned comparison.
./src/H5D.c
Setting a fill value of all zeros will cause the fill value to
be written to the dataset instead of relying on the low-level
file driver initializing unwritten areas with zero.
./src/H5D.c
./src/H5F.c
./src/H5Fprivate.h
./src/H5G.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5O.c
./src/H5T.c
More file mounting stuff.
./src/H5I.c
Fixed a bug where trying to close an invalid object id caused
a core dump. For instance, H5Gclose(-1).
./MANIFEST
./test/Makefile.in
./test/mount.c [NEW]
Mounting tests.
./src/H5R.c
Fixed a couple (herr_t)NULL casts.
----------------------
./src/H5D.c
Fill values are working for contiguous datasets now except
there are two things that need more support from the data
space layer, specifically the ability to form a selection from
the difference of two selections. They are (1) extending an
external contiguous dataset, (2) optimization by delaying the
fill until after the first H5Dwrite().
Renamed H5D_allocate() to H5D_init_storage() since allocation
is only part of the story. Added a data space argument so it
doesn't have to query the space from the object header -- the
space is always available in the caller anyway.
Removed `#ifdef HAVE_PARALLEL' from a few places where it
wasn't necessary. We don't need it around code that doesn't
compile anything from mpi.h or mpio.h.
./src/H5Fistore.c
Uncommented H5F_istore_alloc() for non-parallel and moved the
`#ifdef HAVE_PARALLEL' just around Kim's barrier.
./src/H5Fmpio.c
Wrapped a couple long lines.
Got rid of two signed vs. unsigned comparison warnings.
./MANIFEST
./test/Makefile.in
./test/fillval.c [NEW]
Added tests for fill values. The contiguous dataset extend
test is disabled until H5S_SELECT_DIFF is implemented.
./tools/Makefile.in
Fixed a bug where `make test' didn't build the executables
first. This should cause the snapshots to start up again.
./Makefile.in
Changed to build in `test' directory before `tools'
directory. We want the library tests to pass before we even
start considering the tools. You can still build and/or test
the tools independent of the library tests passing.
Changes since 19980930
----------------------
./MANIFEST
./doc/html/H5.format.html
./src/H5D.c
./src/H5Dprivate.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5O.c
./src/H5Ofill.c [NEW]
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/Makefile.in
Added fill values as documented in previous e-mails. They only
work for chunked datasets so far.
./src/H5E.c
./src/H5Epublic.h
./src/H5P.c
Changed H5E_TEMPLATE to H5E_PLIST.
./src/H5Omtime.c
./src/H5V.c
Fixed a typo in a comment.
./src/H5Tconv.c
Fixed a bug in compound type conversions that caused an
assertion to fail.
----------------------
./MANIFEST
Changed freebsd2.2.1 to freebsd2.2.7 to match change in file name.
Added a few missing files. Are all of these supposed to be
distributed?
./tools/testfiles/h5dumptst.c
+ ./tools/testfiles/tall-1.ddl
+ ./tools/testfiles/tall-2.ddl
+ ./tools/testfiles/tall-3.ddl
./tools/testfiles/tall.ddl
./tools/testfiles/tall.h5
+ ./tools/testfiles/tattr-1.ddl
+ ./tools/testfiles/tattr-2.ddl
+ ./tools/testfiles/tattr-3.ddl
+ ./tools/testfiles/tattr-4.ddl
./tools/testfiles/tattr.ddl
./tools/testfiles/tattr.h5
+ ./tools/testfiles/tdset-1.ddl
+ ./tools/testfiles/tdset-2.ddl
+ ./tools/testfiles/tdset-3.ddl
+ ./tools/testfiles/tdset-4.ddl
./tools/testfiles/tdset.ddl
./tools/testfiles/tdset.h5
+ ./tools/testfiles/tgroup-1.ddl
+ ./tools/testfiles/tgroup-2.ddl
+ ./tools/testfiles/tgroup-3.ddl
./tools/testfiles/tgroup.ddl
./tools/testfiles/tgroup.h5
+ ./tools/testfiles/tslink-1.ddl
+ ./tools/testfiles/tslink-2.ddl
./tools/testfiles/tslink.ddl
./tools/testfiles/tslink.h5
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dprivate.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5Gstab.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
./test/istore.c
Implemented split ratios as documented in previous
e-mails. Frank, the new API functions are H5Pget_btree_ratios()
and H5Pset_btree_ratios().
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
Added more type checking for the data transfer property list
passed to these functions.
./src/H5D.c
Added a dataset transfer property list as an argument to
H5D_allocate() for the parallel version in order to pass split
ratios down to H5F_istore_lock(). Eventually we won't need
the split ratios for H5D_allocate() because we'll build a
completely full B-tree from the leaves up, but it might be
useful to have other transfer properties at that level
anyway. I always caled H5D_allocate() with &H5D_dflt_xfer.
./MANIFEST
./test/Makefile.in
./test/overhead.c [NEW]
Added an `overhead' test run by `make timings'.
----------------------
./MANIFEST
./src/H5B.c
./src/H5Bprivate.h
./src/H5G.c
./src/H5Gnode.c
./src/H5Gprivate.h
./test/Makefile.in
./test/unlink.c [NEW]
Finished H5Gunlink() and H5Grename().
./src/H5F.c
./src/H5Fistore.c
./src/H5Fprivate.h
Removed the last memcpy() from the chunk cache.
./src/H5Fistore.c
The offset of a chunk within a dataset is an 8-byte quantity
per dimension instead of 4 bytes.
./src/H5HL.c
Fixed infinite loops in H5HL_remove().
----------------------
./src/H5F.c
./src/H5Fprivate.h
./src/H5P.c
./src/H5Ppublic.h
./test/chunk.c
./test/dsets.c
The number of slots in the raw data cache can be queried or
set with H5Pget/set_cache(), which now take an extra argument.
The default number of slots is 521 and the default maximum
size is 1MB.
./src/H5Fistore.c
./src/H5Fprivate.h
Finished optimizations. The cache is now a hash and a linked
list instead of an array. The cpu time on my machine for
H5F_istore_lock() has been cut by 60% and H5F_istore_unlock() by
35%.
----------------------
./MANIFEST
Removed duplicate Ragged.html
./doc/src/Glossary.html
Changed 1.0 to 1.2 since 1.0 is the current development
branch, 1.1 will be development after beta release, and 1.2
will be the first complete release (see Version.html).
./test/dsets.c
./test/tstab.c
Added more tests.
----------------------
./COPYING
Reformatted as text instead of C. Removed zlib crew from the
list of contributors since no zlib code is actually in the
hdf5 library.
./INSTALL
./INSTALL.ascired
./MANIFEST
Minor updates for Beta release including version number
change.
./INSTALL_MAINT
Added information about making a release.
./RELEASE
Updated function list based on public header files.
./bin/checkposix
Got rid of complaints about some obvious things.
./doc/html/H5.api.html
./doc/html/RM_H5F.html
./src/H5F.c
./src/H5Fpublic.h
./test/tfile.c
Changed H5Fget_create_template() and H5Fget_access_template()
to H5Fget_create_plist() and H5Fget_access_plist() since that
conforms better to lots of other names.
./doc/html/Datatypes.html
./doc/html/ExternalFiles.html
./doc/html/Files.html
./doc/html/H5.api.html
./doc/html/H5.sample_code.html
./doc/html/RM_H5F.html
./doc/html/RM_H5Front.html
Changed `template' to `property list', etc.
./doc/html/Ragged.html [NEW]
Documentation for ragged arrays.
./src/H5Iprivate.h
./src/H5Ipublic.h
./src/H5I.c
Changed the scope of some symbols to be more local.
./src/H5.c
./src/H5AC.c
./src/H5D.c
./src/H5E.c
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5I.c
./src/H5O.c
./src/H5Ocomp.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5P.c
./src/H5S.c
./src/H5Shyper.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5V.c
./src/H5Z.c
./src/H5private.h
Fixed some violations of our naming scheme by adding HD to the
beginning of all Posix functions.
----------------------
./MANIFEST
./bin/release
./bin/snapshot
The format of the MANIFEST file has been relaxed -- comments
and blank lines should no longer confuse the tools that use
it.
As before, this file should contain a list of *all* files that
are part of HDF5, which means all files which are managed by
CVS/SVF. However, files can be marked so they're not part of
a release by adding _DO_NOT_DISTRIBUTE_ after the file name.
I've removed all the *.obj files from the distribution by
adding _DO_NOT_DISTRIBUTE_ after their names. I also removed
the old white-papers that might not apply to the current
version of the library and documentation about chunking
performance since it's wrong now that chunk caching is
implemented. Everyone please check the files you're
responsible for to make sure that they should really be part
of a release.
To get a list of all files use
grep '^\.' MANIFEST | cut -f1
To get a list of files for distribution use:
grep '^\.' MANIFEST | grep -v _DO_NOT_DISTRIBUTE_
(These commands assume tabs in the MANIFEST file. If the file
might contain spaces then run it through `unexpand' or `tr'
first).
./configure.in
./configure
./test/ragged.c
Check for sigaction().
./test/Makefile.in
The `clean' target removes the timing tests.
----------------------
./MANIFEST
./src/H5R.c [NEW]
./src/H5Rprivate.h [NEW]
./src/H5Rpublic.h [NEW]
./src/Makefile.in
./src/hdf5.h
./test/ragged.c [NEW]
Preliminary support for 2d ragged arrays for Mark Miller and
Jim Reus. Not fully implemented yet. The test is not actually
part of `make test' because we still have some memory problems.
./src/H5E.c
./src/H5Epublic.h
Added H5E_RAGGED as a major error number.
./bin/release
Checks the MANIFEST file against `svf ls' on systems that have
it.
./bin/trace
Fixed a bug that caused arguments of type `void *x[]' to not
be handled.
./src/H5.c
Removed unused variables and changed a couple types to
fix compiler warnings.
Added tracing support for ragged array object ID's and arrays
of pointers.
./src/H5D.c
H5Dcreate() will complain if either of the property lists are
invalid (instead of using the default).
./src/H5D.c
./src/H5Dprivate.h
Split H5Dget_space() into an API and internal function so it
can be called from the new ragged array layer.
./src/H5Fistore.c
Fixed warnings about unsigned vs. signed comparisons.
./src/H5Flow.c
Fixed a warning about a variable being shadowed in the MPI-IO
stuff.
./src/H5Iprivate.h
./src/H5Ipublic.h
Added the H5_RAGGED atom group.
./src/H5Shyper.c
Fixed some freeing-free-memory errors that resulted when
certain arrays were freed but the pointers were left in the
data structures. I simply set the pointers to null after they
were freed.
./src/H5Sprivate.h
./src/H5Sselect.c
Split the H5Sselect_hyperslab() function into an API and a
private function so it could be called from the ragged array
layer.
Added H5S_SEL_ERROR and H5S_SEL_N to the switch statements to
get rid or compiler warnings.
./src/H5Tconv.c
Removed a misleading comment.
./test/bittests.c
Fixed a warning about a printf().
./test/cmpd_dset.c
Fixed warnings about unused variables because of test #11
being commented out.
./bin/trace
Shortened the right margin for the output to allow room for
the `);' at the end of the TRACE() macros.
Fixed errors
H5.c
Fixed core dump with setvbuf() for debugging.
H5Fistore.c
Fixed bug with sparse datasets.
H5Omtime.c
Found a typo in "Posix Programmer's Guide". The `%z' in the
strftime() should be `%Z' instead.
H5T.c
H5Tpublic.h
Improved api tracing for H5Tinsert_array().
h5tools.c
Doesn't dump core for empty datasets.
----------------------
./MANIFEST
./src/H5Ssimp.c [REMOVED]
./src/Makefile.in
Removed H5Ssimp.c since it was no longer used.
./bin/snapshot
Fixed a few minor things to make it work better.
./src/H5D.c
Cleaned up H5D_read() and H5D_write() by combining some code
in each. Added timing calls around the data space calls when
H5S_DEBUG is defined.
./src/H5S.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
Changed H5S_find() so it returns a table entry again instead
of copying the data into a caller-supplied buffer. This
allows the timers to be stored in the table and updated by the
caller. Added H5S_register() to register new table entries
and added entry creation to all the H5S selection
methods. Also changed lots of global functions to static
functions.
./src/H5Fistore.c
Fixed a memory bug in the raw data cache.
----------------------
./MANIFEST
Replaced Compression.html with Filters.html
./doc/html/Filters.html
./src/H5Ocomp.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5Z.c
./src/H5Zprivate.h
Added two extra arguments to H5Pget_filter() in order to
retrieve the filter name. The name is the name registered for
the filter with H5Zregister(), but if the dataset creation
property originally came from an existing file then the name
is that which is stored in the file.
./tools/h5ls.c
The `-v' option now prints the names of the filters.
./src/H5B.c
./src/H5Fistore.c
./src/H5O.c
./src/H5Oefl.c
./src/H5Oprivate.h
./src/H5P.c
Plugged a memory leak.
./src/H5MMprivate.h
H5MM_malloc(0) and H5MM_calloc(0) actually allocate a single
byte in order to be sure that we get a valid pointer.
./src/H5S.c
./src/H5Sselect.c
Fixed pointer->integer conversions in error return values in
three places.
----------------------
./MANIFEST
./test/Makefile.in
./test/mtime.c [NEW]
Test for the modification time message.
./src/H5AC.c
./src/H5Fistore.c
Turned off printing of statistics on H5close() if H5AC_DEBUG
isn't defined.
----------------------
./MANIFEST
./doc/html/H5.format.html
./src/H5O.c
./src/H5Oprivate.h
./src/H5Omtime.c [NEW]
./src/H5private.h
./src/Makefile.in
Added the modification time message. If an object header has
this message then it's value is updated with the current time
whenever anything changes in the object header.
./acconfig.h
./configure.in
Alas, there seems to be no standard way to convert a string
time like 19980727122800 in UTC to a time_t since mktime()
only converts local times to time_t. So I've modified the
configuration to check for various ways of getting the time
zone information:
* Added checks for the `tm_gmtoff' field of `struct tm'.
* Added a check for the `timezone' global variable.
* Added a check for `struct timezone'.
* Added a check for BSDgettimeofday().
* Added a check for gettimeofday() although it doesn't
actually set the timezone argument on some systems.
* Added a check to see if `tm_zone' is a member of `struct tm'.
* Added a check to see if `tzname' is a global variable.
* Added a check to see if `struct tm' is defined in time.h
or sys/time.h.
It's not difficult to get the right UTC modification message
into the object header, but some systems might have problems
getting the right time back out (Irix64 is one) and those
systems will report zero for the H5G_stat_t.mtime from an
H5Gstat() call as if the mtime message isn't even present. It
will, however, continue to be updated as normal.
./src/H5G.c
./src/H5Gpublic.h
The H5G_stat_t struct now contains an `mtime' field which will
hold the object modification time. If the object has no
object modification time then the `mtime' will be initialized
to zero.
Fixed a bug in H5G_stat() that caused the `objno' field of the
H5G_stat_t to be set incorrectly on some machines.
./src/H5D.c
Writing to external datasets fail if the hdf5 file is not open
for writing.
A modification time message is added to the dataset object
header when it's created and H5O_touch() is called from
H5D_write() to update that message.
./src/H5T.c
Fixed a bug in H5Tget_member_dims() that caused a segmentation
fault if one of the output array arguments was the null
pointer.
Relaxed the member dimension checking in H5Tinsert_array() so
it can also be used for scalar members.
./test/Makefile.in
Added additional file names to the `mostlyclean' target.
./tools/h5dump.c
./tools/h5tools.h
Increased the temporary buffer size to 1MB.
Added support for printing compound data types with array
members.
When printing H5T_NATIVE_CHAR and H5T_NATIVE_UCHAR we escape
double quote characters.
./tools/h5ls.c
Changed the output format a little because we were starting to
get too much info to fit on a line. Without `--verbose' each
object occupies one line of output. Otherwise, additional
information is printed below the object name: object file
address, comment, and modification time. If `--dump' is given
then the data is printed after the other information.
./test/cmpd_dset.c
Changed the way the dataset is initialized to be more uniform.
----------------------
./src/H5A.c
./src/H5Apublic.h
./test/tattr.c
Switched the order of the second and third argument of
H5Aget_name() to make it consistent with other functions that
take buffers and buffer sizes.
./src/H5G.c
./src/H5Gpublic.h
./src/H5Gprivate.h
The H5Gget_comment() function returns the size of the comment
including the null terminator. If the object has no comment
then zero is returned. If an error occurs then a negative
value is returned.
./MANIFEST
./tools/Makefile.in
./tools/h5tools.h [NEW]
./tools/h5dump.c [NEW]
Created a library for printing values of datasets in a way
that looks nice. It's not done yet, but I needed it for
debugging the contents of files from Jim Reus.
./tools/h5ls.c
Added the `-d' and `--dump' options which cause the contents
of a dataset to be printed. Added `-w N' and `--width=N'
options to control how wide the raw data output should be. If
you want single-column output then say `-w1'.
Printing dataset values can now handle datasets of any integer
or floating point atomic type. As a special case, integers
which are one byte wide are treated a character strings for
now.
Sample output:
$ h5ls --dump --width=60 banana.hdf
ARCHIVE 0:0:0:744 Dataset {52/Inf}
Data:
(0) "U struct complex { double R; double I; };\012V"
(43) " double;\012"
U 0:0:0:2500 Dataset {256/512}
Data: printing of compound data types is not implemented yet
V 0:0:0:3928 Dataset {256/512}
Data:
(0) 0, 0.015625, 0.03125, 0.046875, 0.0625,
(5) 0.078125, 0.09375, 0.109375, 0.125, 0.140625,
(10) 0.15625, 0.171875, 0.1875, 0.203125, 0.21875,
(15) 0.234375, 0.25, 0.265625, 0.28125, 0.296875,
...
----------------------
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsplit.c
Changed the allocation size request from `size_t' to `hsize_t'
because it was overflowing for the `big' test.
./src/H5detect.c
If `long double' and `double' are the same size then we define
H5T_NATIVE_LDOUBLE to be the same as H5T_NATIVE_DOUBLE.
Similarly for `long' vs. `long long' and `unsigned long' vs.
`unsigned long long'.
./test/Makefile.in
Added `big' to the list of tests to normally run.
./test/big.c
Added a check to see if the file system supports holes and if
it doesn't then the test is skipped.
./RELEASE
Added a couple minor details details about API tracing and
symbolic links.
./src/H5public.h
Added comments about the use of hbool_t. Fixed a comment
spelling error.
./test/testhdf5.h
Changed the way the version number is printed. The old method
was `hdf5-1.2.3d' and the new method is `hdf5 version 1.2
release 3'
./tools/h5ls.c
Only prints the max dimension if it differs from the current
dimension or if verbose mode is enabled. Added switches `-?',
`-h', and `--help' to print a usage message. Added switches
`-v' and `--verbose' to generate more verbose output. Added
switches `-V' and `--version' to print the version number and
exit. The version number is printed like: This is h5ls
version 1.0 release 24'
./bin/h5vers [NEW]
This script prints, sets, and/or increments the hdf5 version
number. It can be run from the top directory or any of the
child directories like src, tools, test, etc. Some examples:
$ h5vers # Display current version
1.0.24
$ h5vers -v
version 1.0 release 24 # Display current version.
$ h5vers -s 5.2.8 # Set version and display
5.2.8
$ h5vers -s 2.1
2.1.0
$ h5vers -s hdf5-1.0.24a.tar.bz2
1.0.24
$ h5vers -s 'version 2.0 release 8'
2.0.8
$ h5vers -s 'junk 22 junk 33 more junk 66 and 99 junk'
33.66.99
$ h5vers -i major # Increment from 1.0.24
2.0.0
$ h5vers -i minor # Increment from 1.0.24
1.1.0
$ h5vers -i release # Increment from 1.0.24
1.0.25
$ h5vers ~/hdf5/src/H5public.h # Use an alternate file
1.0.24
./bin/checkapi [NEW]
Run from the src directory with arguments H5[A-Z]*.c and it
will print the locations of each place where an API function
was called from within the library. Use it as the compile or
grep command under Emacs and you can C-x ` through the list.
./bin/debug-ohdr [NEW]
Keeps track of H5O_open() and H5O_close() debugging messages
and lists the file addresses of the object headers that are
opened but never closed. You must enable the `o' debugging at
configuration time and pipe stderr into this script.
./bin/errors
Added a note to indicate that this script no longer works
because of changes in the HRETURN_ERROR() and HGOTO_ERROR()
macros.
./bin/iostats [NEW]
Watches output from the Linux strace program and accumulates
statistics about low-level access to an hdf5 file. The output
is a list of 2d data points which can be plotted by gnuplot to
show file seeking behavior.
./MANIFEST
Added new files.
