changes - all changes surrounded by a #if defined(WIN32)
defined __undef__ to be equal to nothing, changed long long to __int64
removed body of H5TimerBegin, defined F_OK,R_OK,W_OK, some other
changes involving header files.
----------------------
./src/H5I.c
If we ran out of object ID's (which happens after about 67
million requests) then we'd wrap back to the first possible ID
but if we ran out a second time (after ~134 million requests)
then H5I_register() failed. Now it continues to wrap as often
as needed.
If we wrapped to the beginning of the possible ID's and then
requested ID's till we got toward the end of the list then
H5I_register() failed if the last possible ID's were in use.
The new behavior is to try all possible ID's (not just higher
ID's) before giving up.
----------------------
./src/H5Fistore.c
Improved the hash function so it mixes bits better. This
results in a few percent improvement in raw data chunk cache
efficiency because there are fewer collisions.
./test/chunk.c
Added #define's for chunk preemption `w0' value and number of
slots in cache.
./src/H5B.c
Added some more comments to H5B_insert_helper() and
H5B_remove_helper() and also point to some additional
documentation.
Replaced FAIL with H5B_INS_ERROR in routine H5B_remove_helper.
Updated code that calls H5B_remove_helper with the proper code.
H5Fmpio.c:
Removed a typo.
H5Gnode.c:
Replaced FAIL with H5B_INS_ERROR in routine H5G_node_remove.
H5Odtype.c:
Put in proper casting to remove compiler warnings.
H5S.c:
Replaced FAIL with H5S_NO_CLASS in routine H5Sget_simple_extent_type.
H5Sselect.c:
Fixed couple typos to remove compiler warnings.
Platform tested:
O2K.
----------------------
./src/H5F.c
./src/H5Fpublic.h
Added H5Freopen() as documented in earlier e-mails. This is
really just a wrapper around H5F_new().
----------------------
./bin/trace
./src/H5.c
./src/H5F.c
./src/H5Fprivate.h
./src/H5Fpublic.h
Added a `scope' argument to H5Fflush() which should be either
H5F_SCOPE_LOCAL or H5F_SCOPE_GLOBAL and determines which files
are flushed (just the specified file or the entire virtual
file).
./src/H5F.c
Added reference counts to the H5F_t struct so we get the
correct behavior between H5Funmount() and H5Fclose().
./src/H5O.c
Fixed a memory leak that happens during error handling.
./test/cmpd_dset.c
./test/unlink.c
Fixed a memory leak.
./test/mount.c
Enabled the H5Fclose() test.
----------------------
./src/H5.c
Fixed a signed vs. unsigned comparison.
./src/H5D.c
Setting a fill value of all zeros will cause the fill value to
be written to the dataset instead of relying on the low-level
file driver initializing unwritten areas with zero.
./src/H5D.c
./src/H5F.c
./src/H5Fprivate.h
./src/H5G.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5O.c
./src/H5T.c
More file mounting stuff.
./src/H5I.c
Fixed a bug where trying to close an invalid object id caused
a core dump. For instance, H5Gclose(-1).
./MANIFEST
./test/Makefile.in
./test/mount.c [NEW]
Mounting tests.
./src/H5R.c
Fixed a couple (herr_t)NULL casts.
----------------------
./src/H5F.c
./src/H5Fprivate.h
./src/H5G.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gpublic.h
./test/istore.c
./test/tstab.c
Removed CWG functionality.
./tools/Makefile.in
Added `_test' where I added `test' last week. Maybe now the
snapshots will start up again...
----------------------
./doc/html/H5.format.html
./src/H5HG.c
Fixed a bug in the global heap that caused H5HG_read() to
write past the end of the buffer in certain cases.
./test/big.c
The test is skipped if hdf5 was configured with
`--disable-hsizet'.
./src/H5Ofill.c
Data type conversions are implemented for the fill value.
./src/H5.c
Tracing prints one of H5P_FILE_CREATE, H5P_FILE_ACCESS,
H5P_DATASET_CREATE, H5P_DATASET_XFER, or H5P_MOUNT instead of
the more cryptic H5I_TEMPLATE_* constants.
./src/H5D.c
Removed prototype for H5D_find_name().
./src/H5I.c
The GROUP_MASK and ID_MASK are both calculated from GROUP_BITS
instead of being set by hand.
We don't use the sign bit of hid_t; all valid hid_t values are
positive so we can say things like `if ((file=H5Fopen(...))<0)'.
Changed `(int)pow(2.0,x)' to `1<<x' so we don't have to worry
about rounding.
Fixed H5I_get_type() so it doesn't always fail an assertion.
./src/H5E.c
./src/H5Epublic.h
Added minor error H5E_MOUNT
./src/H5F.c
./src/H5Fprivate.h
Added H5Fmount() and H5Funmount(). Mounting and unmounting
works as documented but some of the other things aren't
implemented yet, the biggest being current working groups
always acting on the root of the mount tree, and H5Fclose()
closing the entire tree. The rest of the stuff will be added
shortly...
./src/H5P.c
./src/H5Ppublic.h
Added the H5P_MOUNT property list but haven't implemented any
particular properties for it yet.
./src/H5Gstab.c
Hard links across files return an error instead of failing an
assertion.
----------------------
./src/H5D.c
Fill values are working for contiguous datasets now except
there are two things that need more support from the data
space layer, specifically the ability to form a selection from
the difference of two selections. They are (1) extending an
external contiguous dataset, (2) optimization by delaying the
fill until after the first H5Dwrite().
Renamed H5D_allocate() to H5D_init_storage() since allocation
is only part of the story. Added a data space argument so it
doesn't have to query the space from the object header -- the
space is always available in the caller anyway.
Removed `#ifdef HAVE_PARALLEL' from a few places where it
wasn't necessary. We don't need it around code that doesn't
compile anything from mpi.h or mpio.h.
./src/H5Fistore.c
Uncommented H5F_istore_alloc() for non-parallel and moved the
`#ifdef HAVE_PARALLEL' just around Kim's barrier.
./src/H5Fmpio.c
Wrapped a couple long lines.
Got rid of two signed vs. unsigned comparison warnings.
./MANIFEST
./test/Makefile.in
./test/fillval.c [NEW]
Added tests for fill values. The contiguous dataset extend
test is disabled until H5S_SELECT_DIFF is implemented.
./tools/Makefile.in
Fixed a bug where `make test' didn't build the executables
first. This should cause the snapshots to start up again.
./Makefile.in
Changed to build in `test' directory before `tools'
directory. We want the library tests to pass before we even
start considering the tools. You can still build and/or test
the tools independent of the library tests passing.
----------------------
./src/H5D.c
./src/H5Fistore.c
./src/H5Fprivate.h
Fixed a couple things for parallel hdf5 that I broke with the
last checkin.
./src/H5Ofill.c
If no fill value is specified it isn't added to the object
header.
./tools/h5ls.c
Added a line-feed after `Unknown object' is printed.
./tools/h5tools.c
Fixed printing of scalar values. Need to still track down a
failed assertion when H5Sselect_hyperslab() is called with a
zero size....
Changes since 19980930
----------------------
./MANIFEST
./doc/html/H5.format.html
./src/H5D.c
./src/H5Dprivate.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5O.c
./src/H5Ofill.c [NEW]
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/Makefile.in
Added fill values as documented in previous e-mails. They only
work for chunked datasets so far.
./src/H5E.c
./src/H5Epublic.h
./src/H5P.c
Changed H5E_TEMPLATE to H5E_PLIST.
./src/H5Omtime.c
./src/H5V.c
Fixed a typo in a comment.
./src/H5Tconv.c
Fixed a bug in compound type conversions that caused an
assertion to fail.
----------------------
./MANIFEST
Changed freebsd2.2.1 to freebsd2.2.7 to match change in file name.
Added a few missing files. Are all of these supposed to be
distributed?
./tools/testfiles/h5dumptst.c
+ ./tools/testfiles/tall-1.ddl
+ ./tools/testfiles/tall-2.ddl
+ ./tools/testfiles/tall-3.ddl
./tools/testfiles/tall.ddl
./tools/testfiles/tall.h5
+ ./tools/testfiles/tattr-1.ddl
+ ./tools/testfiles/tattr-2.ddl
+ ./tools/testfiles/tattr-3.ddl
+ ./tools/testfiles/tattr-4.ddl
./tools/testfiles/tattr.ddl
./tools/testfiles/tattr.h5
+ ./tools/testfiles/tdset-1.ddl
+ ./tools/testfiles/tdset-2.ddl
+ ./tools/testfiles/tdset-3.ddl
+ ./tools/testfiles/tdset-4.ddl
./tools/testfiles/tdset.ddl
./tools/testfiles/tdset.h5
+ ./tools/testfiles/tgroup-1.ddl
+ ./tools/testfiles/tgroup-2.ddl
+ ./tools/testfiles/tgroup-3.ddl
./tools/testfiles/tgroup.ddl
./tools/testfiles/tgroup.h5
+ ./tools/testfiles/tslink-1.ddl
+ ./tools/testfiles/tslink-2.ddl
./tools/testfiles/tslink.ddl
./tools/testfiles/tslink.h5
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dprivate.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5Gstab.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
./test/istore.c
Implemented split ratios as documented in previous
e-mails. Frank, the new API functions are H5Pget_btree_ratios()
and H5Pset_btree_ratios().
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
Added more type checking for the data transfer property list
passed to these functions.
./src/H5D.c
Added a dataset transfer property list as an argument to
H5D_allocate() for the parallel version in order to pass split
ratios down to H5F_istore_lock(). Eventually we won't need
the split ratios for H5D_allocate() because we'll build a
completely full B-tree from the leaves up, but it might be
useful to have other transfer properties at that level
anyway. I always caled H5D_allocate() with &H5D_dflt_xfer.
./MANIFEST
./test/Makefile.in
./test/overhead.c [NEW]
Added an `overhead' test run by `make timings'.
----------------------
./MANIFEST
./src/H5B.c
./src/H5Bprivate.h
./src/H5G.c
./src/H5Gnode.c
./src/H5Gprivate.h
./test/Makefile.in
./test/unlink.c [NEW]
Finished H5Gunlink() and H5Grename().
./src/H5F.c
./src/H5Fistore.c
./src/H5Fprivate.h
Removed the last memcpy() from the chunk cache.
./src/H5Fistore.c
The offset of a chunk within a dataset is an 8-byte quantity
per dimension instead of 4 bytes.
./src/H5HL.c
Fixed infinite loops in H5HL_remove().
----------------------
./src/H5F.c
./src/H5Fprivate.h
./src/H5P.c
./src/H5Ppublic.h
./test/chunk.c
./test/dsets.c
The number of slots in the raw data cache can be queried or
set with H5Pget/set_cache(), which now take an extra argument.
The default number of slots is 521 and the default maximum
size is 1MB.
./src/H5Fistore.c
./src/H5Fprivate.h
Finished optimizations. The cache is now a hash and a linked
list instead of an array. The cpu time on my machine for
H5F_istore_lock() has been cut by 60% and H5F_istore_unlock() by
35%.
----------------------
This checkin is to fix a couple bugs for Jim Reus. Some features are
not fully implemented but it shouldn't break anything.
./config/conclude.in
./test/Makefile.in
`make clean' removes object files from the test directory as
well as a couple more *.h5 temp files.
./config/hpux9.03 [NEW]
New config file for HP/UX 9.03
./src/H5B.c
./src/H5Bprivate.h
./src/H5Fistore.c
./src/H5G.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gstab.c
Not-yet-complete version of object removal.
./src/H5Fistore.c
./src/H5Fprivate.h
Experimental optimizations, disabled by default.
./src/H5Fprivate.h
Default low-level driver was changed to H5F_LOW_SEC instead of
H5F_LOW_STDIO because the sec2 driver is much easier to debug.
./src/H5Fsplit.c
./src/H5G.c
./src/H5Z.c
Changed a couple return statements to HRETURN.
./src/H5Odtype.c
Removed a check for nested compound data types from back when
they weren't implemented that raised an error.
./tools/h5tools.c
Increased temp buffer sizes and added a check for buffer
overflow so we fail an assertion (hopefully). This really
needs to be fixed sometime.
Added support for printing H5T_STRING data types.
