Purpose: This a fix for bug #921
Description: On platforms where big test runs, it creates a set of
"solid" 1GB files. Test will take forever (modi4) or will fail
if quotas are exceeded.
Solution: Default library behavior is to allocate dataset space earlier and
to write fill values. I changed the test to use late space allocation
and never write fill values.
Platforms tested: True64 (PSC), modi4 (sequential and parallel), arabica with 64-bit
option(test was skipped there). I also enabled szip and it passed :-)
Misc. update:
Update
Description:
Updated the Copyright statement
Platforms tested:
Linux (This change is only in the comments, so I just check that the
modules still compile)
Misc. update:
Migrate from configure macros of XYZ_ABC to H5_XYZ_ABC
Description:
configure generates many macros definitions on the fly and
were stored in src/H5config.h which is included by H5public.h.
But other software that uses hdf5 may also run their own configure.
There can be a clash in macro name space. We decided awhile ago
to prepend all generated macros with "H5_" to avoid conflicts.
The process has started and this commit completes it (at least attempt
to).
Solution:
Many macros symbols (e.g. SIZEOF_xxx and HAVE_xxx were changed to
H5_SIZEOF_xxx and H5_HAVE_xxx). Then H5private.h no longer includes
H5config.h. This cuts H5config.h away from HDF5 source code.
Pending issues:
The module of fortran and pablo are to be resolved in a different
commit.
Platforms tested:
eirene (parallel), arabica (solaris 7 --enable-fortran, --enable-cxx)
Feature
Description:
Added option -c to allow skipping file system Checking. This allows
users to run the test even if the program thinks it may fill up the
file system.
Platforms tested:
eirene
Code cleanup
Description:
Platform dependent code related to the struct stat and fstat
calls polluted source codes. Hard to maintain.
Solution:
Platform dependent code are moved to H5private.h and then internal
code can #include H5private.h. Repeat those macro definition for
the stdio and multi drivers since they area examples for writing
a virtual file driver. They must not use any internal code.
Platforms tested:
eirene (parallel), modi4 (serial including gass driver.)
feature
Description:
Added -fsize <fsize> option which controls the family file size
used. This can be used to test the file size limits of a machine
or file system.
Platforms tested:
modi4 (passed even 20GB file size).
Eirene (started to fail when 2GB is used. Expected since linux 2.2
does not support large than 2GB file size.)
burrwhite (passed up to 4GB. Expected since Linux 2.4 supports larger
than 2GB file size.) Then it failed at 4GB and beyond. This is
probably a bug in the family file driver.
Code cleanup
Description:
I had moved an fclose() in my earlier fix and it could lead to a resource
leak in certain error conditions.
Also, prepared file for Albert to expand to test with files larger than
2GB... :-)
Solution:
Moved fclose() call back to original position.
Put in type cast for FAMILY_SIZE macro.
Platforms tested:
FreeBSD 4.4 (hawkwind)
Bug fix
Description:
'big' test was not detecting that the AFS quota had been hit when running
under FreeBSD.
Solution:
Amending quota checking code to detect errors on file closes as well as
opens, seeks and writes.
Platforms tested:
FreeBSD 4.4 (hawkwind)
Feature shift
Description:
Take out the v1.2.x compatibility stubs and put in the hooks for v1.4.x
compatibility when needed.
Platforms tested:
FreeBSD 4.3 (hawkwind)
Update
Description:
Changed includes of the form:
#include <hdf5_file.h>
to
#include "hdf5_file.h"
so that gcc can pick them up easier without including the system
header files since we don't care about them.
Platforms tested:
Linux
Clean up warnings
Description:
The "FAILED" macro is defined by Windows and is causing warnings and
potential errors when compiled on that platform.
Solution:
Change our macro from FAILED to H5_FAILED.
Platforms tested:
FreeBSD 4.2 (hawkwind)
Code cleanup.
Description:
Fixed _lots_ (I mean _tons_) of warnings spit out by the gcc with the
extra warnings. Including a few show-stoppers for compression on IRIX
machines.
Solution:
Changed lots of variables' types to more sensible and consistent types,
more range-checking, more variable typecasts, etc.
Platforms tested:
FreeBSD 4.2 (hawkwind), IRIX64-64 (modi4)
Backward compatibility code
Description:
Add in code to allow the library to emulate the v1.2 API and behavior.
Platforms tested:
FreeBSD 4.2 (hawkwind)
The "FILENAME" declared extern in h5test.h is not always used.
It was used in h5_cleanup to remove temporary files created
during tests. Not all tests codes have used this routine.
Indeed, quite a few of test programs do "#define FILENAME ".
Also, h5_cleanup needs to work in tandem with h5_fixname.
h5_fixname accepts an explicite base_name argument instead
of using the global variable FILENAME. That is cleaner.
Solution:
Added char *base_name[] as a new argument to h5_cleanup, in
the same style as h5_fixname. Removed "extern char *FILENAME..."
from use. Also, undo some unnecessary declaration of "char *FILENAME"
from some tests which don't use it at all (yet).
Platforms tested:
modi4-64(irix64), arabica(solari2.7), eirene(linux)
(arabica could not launch tests automatically. I had to hack
in LD_LIBRARY_PATH to make them run.)
** configure.in
** configure [REGENERATED]
** src/H5private.h
** src/H5public.h
** src/Makefile.in
Generates an H5pubconf.h file which is just like H5config.h except all
the preprocessor symbols have `H5_' prepended. This was done so that
the configuration results can be used in public header files without
polluting the namespace.
** src/H5.c
Added H5I_REFERENCE and H5I_VFL to the API tracing code so their names
are printed instead of just numbers.
** src/H5FDstdio.c
** tools/h5import.c
** tools/h5repart.c
** tools/pdb2hdf.c
Changed to use the `H5_' versions of configure results since these
files include only the public API.
** test/big.c
Removed a compiler warning.
** test/h5test.c
Removed unused code.
----------------------
./MANIFEST
./src/H5FDmulti.c [NEW]
./src/H5FDmulti.h [NEW]
./src/Makefile.in
./src/hdf5.h
The split driver was reimplemented as a more general "multi"
driver which is capable of splitting data into multiple files
like the family driver except the partioning is done by memory
usage type instead of address. The H5Pset_fapl_split()
function just calls H5Pset_fapl_multi() with arguments which
prepare to split the address space into two files: meta and
raw data.
This is the first version. I plan to allow the open() call to
relax a bit which would allow one to open an hdf5 file when
only the meta-data file is present. This would allow a very
large file to be split and stored on tape and the relatively
small meta file to be mirrored on disk to allow limited
browsing of the file (any request for raw data would fail).
./src/H5private.h
./src/H5F.c
./src/H5FD.c
./src/H5FDprivate.h
./src/H5FDpublic.h
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDmpio.c
./src/H5FDsec2.c
Added the ability for a file driver to store information in
the superblock which would be needed if the file were opened
again later for reading. The format is driver-defined which
allows users to extend it however they like.
./doc/html/H5.format.html
Added information about the new driver information block of
the superblock. This is where file drivers store information
they need in order to reopen the file later.
./src/H5F.c
./src/H5Fprivate.h
./src/H5FD.c
./src/H5FDprivate.h
./src/H5FDpublic.h
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5Fistore.c
./src/H5R.c
The file access properties and the file access property list
were decoupled, which allows the property list to more cleanly
contain properties for various levels of the file and which
allows the property list to be modified more cleanly when
opening files.
./src/H5.c
./src/H5FDpublic.h
Removed H5FD_MEM_META and H5FD_MEM_GROUP since they're never
used.
./src/H5D.c
Changed the way we detect the MPIO driver in all these special
cases.
./src/H5F.c
./src/H5Rpublic.h
./test/tfile.c
The default file sizeof(offset) was changed to be a function
of haddr_t instead of hsize_t.
THE H5RPUBLIC.H DEFINITIONS WILL HAVE PROBLEMS IF THE USER
CREATES A FILE WITH NON-DEFAULT OFFSET AND SIZE SIZES!
./src/H5F.c
Fixed an uninitialized memory access bug in file closing
related to the VFL.
./src/H5T.c
./src/H5Tpublic.h
Added an H5T_NATIVE_HADDR predefined datatype which
corresponds to the `haddr_t' type.
./test/Makefile.in
Reformatted long lines.
./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
Removed the H5F_ACC_DEBUG flag from file creation/open calls.
./test/big.c
Plugged a memory leak.
./test/h5test.c
Added support for the `multi' driver.
Removed #warning about not having the stdio driver. Plans are
to not implement it since the sec2 driver serves the same
purpose and testing didn't show any difference in execution
times between the two.
----------------------
This extensive change is the virtual file layer implementation. I've
ported and tested the sec2, family, and core drivers and only ported
the mpio driver (Albert will test it). So if you need MPIO I would
recommend sticking with the previous version for a while.
You will get a few compile warnings about split and stdio drivers not
being implemented and possibly tracing information not inserted in
some of the drivers. You can safely ignore them but I plan to fix
them.
I'm still working on the split driver because I just realized that it
needs a part of the VFL that isn't written yet.
Documentation is being updated also because there were some minor
changes (mostly just name changes). It should be available on my web
site later this week.
./MANIFEST
./src/Makefile.in
./src/hdf5.h
./src/H5Flow.c [REMOVED]
./src/H5Fstdio.c [REMOVED]
./src/H5Fsec2.c [REMOVED]
./src/H5Fsplit.c [REMOVED]
./src/H5Fmpio.c [REMOVED]
./src/H5Ffamily.c [REMOVED]
./src/H5Fcore.c [REMOVED]
./src/H5MFpublic.h [REMOVED]
./src/H5FD.c [NEW]
./src/H5FDcore.c [NEW]
./src/H5FDcore.h [NEW]
./src/H5FDfamily.c [NEW]
./src/H5FDfamily.h [NEW]
./src/H5FDmpio.c [NEW]
./src/H5FDmpio.h [NEW]
./src/H5FDprivate.h [NEW]
./src/H5FDpublic.h [NEW]
./src/H5FDsec2.c [NEW]
./src/H5FDsec2.h [NEW]
Removed/added files for virtual file layer.
./bin/trace
./src/H5.c
Removed unused public datatypes and added new VFL public
datatypes.
Changed an error message.
./config/BlankForm
./config/dec-flags
./config/gnu-flags
./config/hpux10.20
./config/hpux9.03
./config/irix5.x
./config/irix6.x
./config/solaris2.x
./config/unicosmk
Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the
configuration since they're no longer applicable. The default
file driver is always the sec2 driver and it always optimizes
calls to lseek() or lseek64().
./config/depend.in
C preprocessor errors generated during automatic dependency
building are sent to /dev/null to prevent them from appearing
twice in the make output.
./src/H5AC.c
./src/H5B.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Oshared.c
./src/H5T.c
./src/H5detect.c
./test/ohdr.c
Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent
with the `haddr_t' datatype which is now a public type.
./src/H5D.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5Tconv.c
./test/cmpd_dset.c
./test/dsets.c
./test/overhead.c
./test/tselect.c
./test/tvltypes.c
The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER
because the properties apply to all types of I/O operations,
not just datasets.
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5R.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Spoint.c
./src/H5Sprivate.h
./test/big.c
./test/h5test.c
./test/istore.c
./testpar/t_dset.c
./testpar/t_file.c
./tools/h5debug.c
./tools/h5ls.c
Modified to work with the virtual file layer by calling H5FD_*
functions instead of H5F_low_* functions and by passing file
access and data transfer properties by object ID instead of
pointer.
Changed H5D_transfer_t to H5FD_mpio_xfer_t since the
COLLECTIVE vs. INDEPENDENT transfer mode is specific to the
MPIO file driver.
Moved MPIO-specific stuff into the MPIO driver.
./src/H5B.c
./src/H5D.c
./src/H5Fprivate.h
The H5F_mpio_* private functions were renamed and placed in
the H5FDmpio driver except those which appeared in H5Smpio.c.
./src/H5E.c
./src/H5Epublic.h
Added major error number H5E_VFL for virtual file layer
related errors.
./src/H5F.c
./src/H5Fprivate.h
Changed the logic that controls whether the boot block is
written. Instead of assuming that the first call to write the
boot block is only to allocate space, I've added a function
argument which makes this explicit.
Changed the way files are compared so that a driver-defined
comparison function can be called. Files which belong to
different drivers are always considered different.
Removed H5F_driver_t since file drivers are now identified by
object ID instead of a special non-user-extendible datatype.
Removed all the hard-coded low-level file properties which
have been replaced by the various file drivers.
./src/H5I.c
./src/H5Iprivate.h
Added the H5I_inc_ref() which was removed a few months ago
since we finally have a use for it.
./src/H5Ipublic.h
Added the H5I_VFL object ID type to identify file drivers in
the virtual file layer.
./src/H5MF.c
./src/H5MFprivate.h
Moved all the allocation/deallocation code into the virtual
file layer which allows file drivers to override much of it.
./src/H5P.c
./src/H5Ppublic.h
Moved file driver-specific code into the various file driver
files.
The H5Pcopy() and H5Pclose() functions make calls into the
virtual file driver to manage the memory for driver-specific
file access and data transfer properties.
./src/H5private.h
./src/H5public.h
The `haddr_t' type is now public.
./test/tfile.c
Added a few more comments.
----------------------
./config/irix64
The old (-32) compiler is now supported by setting envrionment
CC='cc -32'. The -64 compiler is the default or you can set
CC='cc -64'.
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5G.c
./src/H5I.c
./src/H5Ocomp.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5T.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5Z.c
./src/H5detect.c
./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/enum.c
./test/mtime.c
./test/ohdr.c
./tools/h5ls.c
Fixed lots of warnings on Irix64. Mailed a few remaining
warnings in H5S to Quincey and a few in the dumper to
Ruey-Hsia.
----------------------
./src/H5T.c
Fixed a typo in the registration of the `unsigned char' to
`unsigned long long' type conversion that caused it to not be
registered, falling back to software whenever that conversion
path was taken.
./MANIFEST
./test/Makefile.in
./test/testhdf5.c
./test/testhdf5.h
./test/theap.c [REMOVED]
./test/lheap.c [NEW]
./test/tohdr.c [REMOVED]
./test/ohdr.c [NEW]
./test/tstab.c [REMOVED]
./test/stab.c [NEW]
Removed the `t' from the front of these names and made each
test a stand-alone program following the format of most of the
other tests.
./test/big.c
Uses libh5test.a but always sets the low-level driver to 1GB
file family.
The `#if' near the top to set the data space to 8GB has been
simplified now that `long_long' is always defined and the
error message is improved when `long_long' isn't wide enough.
Cleanup code was added to the error handling.
./test/gheap.c
./test/istore.c
Uses libh5test.a. Added error cleanup code.
./test/dtypes.c
./test/h5test.c
Added 68 new tests that check hardware and software
conversions between `long long' and `unsigned long long' and
the other integer types. The tests only run on machines where
sizeof(long_long)!=sizeof(long). We test a total of 180
different integer conversions, half in hardware and half in
software.
Cut down the number of times each test is run from 5 to 1 so
it doesn't take so long. If you want to run more times
there's a constant that can be changed at the top of the file.
./test/extend.c
Removed unused variable.
./test/h5test.c
./test/h5test.h
./test/external.c
./test/fillval.c
The h5_cleanup() returns true/false so it can be used in an `if'
statement to clean up additional files.
./doc/html/Environment.html
Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions.
./src/H5P.c
Changed the trace type for the second argument from `Iu' to
`x' since it's an output parameter.
./INSTALL
Added a warning that the GNU zlib that comes with the latest
version of HDF4 is too old to use with HDF5 and must be
renamed so configure doesn't see it when `--enable-hdf4' is
used.
----------------------
./test/flush2.c
./test/overhead.c
Removed carriage-returns inserted by a broken operating system.
./test/big.c
./test/mtime.c
./test/ragged.c
./tools/h5ls.c
Removed inclusion of <H5config.h>, system header files, and definition
of __unused__ since this all happens in <H5private.h>.
./test/chunk.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
./test/fillval.c
./test/flush1.c
./test/flush2.c
./test/iopipe.c
./test/links.c
./test/mount.c
./test/overhead.c
./test/shtype.c
./test/unlink.c
./tools/h5import.c
./tools/h5repart.c
Removed inclusion of <H5config.h> since <hdf5.h> includes it.
./test/flush1.c
Includes <stdlib.h>, protects inclusion of <unistd.h> by using
HAVE_UNISTD_H instead of STDC_HEADERS.
----------------------
./src/H5.c
./src/H5Smpio.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpublic.h
./src/H5detect.c
./src/H5private.h
./src/H5public.h
./test/big.c
The `long long' type isn't quite as prevalent as we had hoped;
there is at least one system that defines `__int64' but not
`long long'. Therefore, I've temporarily changed all
occurrences of `long long' to `long_long' and then #define
that in H5private.h based on the existence of `long long' or
`__int64'. This gets rid of some #ifdef's in other parts of the code.
The semantics of the hdf5 types are:
*int8_t Exactly one byte
*int16_t At least two bytes. We favor 32-bit integers over
16-bit integers if the 16-bit integer is 4-bytes wide
(Cray)
*int32_t At least four bytes.
*int64_t At least eight bytes
long_long The widest integral integer type
The H5Smpio.c contains debugging code which is non-portable.
./tools/h5ls.c
Changed the order native types are detected so we favor the name `int'
over `short' or `long' if two of them are the same.
./config/conclude.in
Added a rule to make test programs depend on the hdf5 library. This
fixes a minor bug where changing H5detect.c and then running `make
test' caused H5Tinit.c to not be recompiled and therefore the test
files are not relinked.
----------------------
./INSTALL.parallel [NEW]
We're beginning to unify some of the parallel installation
steps. This file will contain general information for
installing the parallel library. It's not complete yet.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Check for xdr_int() in libnsl required on Solaris when linking
with hdf4. It's found on the Irix system I tested which
complains that `-lnsl' didn't resolve any symbols. Oh well.
Fixed the order of searching for libdf and libmfhdf for hdf4
linking.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5Z.c
Check for compress() in libz in order to find older versions
of the library that will still work for hdf4. Added a
separate check for compress2() that hdf5 will use.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5.c
./src/H5private.h
./src/H5A.c
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5R.c
./src/H5RA.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/H5Sselect.c
./src/H5T.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5V.c
./test/bittests.c
./test/gheap.c
./test/hyperslab.c
./test/istore.c
./test/tmeta.c
./test/trefer.c
./test/tselect.c
./tools/h5debug.c
./tools/h5tols.c
Added checks for Posix.1g types like `int8_t'. If not defined
then H5private.h defines them. Changed all `int8' etc. to
`int8_t'.
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5I.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
./src/H5Z.c
Calling H5*_term_interface() resets interface_initialize_g to
FALSE so a subsequent call to H5open() (implied or explicit)
reinitializes global variables properly.
./src/H5private.h
./src/H5Oefl.c
./src/H5S.c
Changed MAX_SIZET, MAX_SSIZET, MAX_HSIZET, and MAX_HSSIZET to
SIZET_MAX, SSIZET_MAX, HSIZET_MAX, and HSSIZE_MAX to they
match the Posix.1 constants in <limits.h>.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5detect.c
Added 36 more integer hardware conversion functions to the
type conversion table for conversions to/from `long long' and
`unsigned long long'. The `long long' names will be changed
shortly to make them portable to Win32.
Changed H5T_init() to H5T_native_open() and added an
H5T_native_close() to open and close the predefined native
data types.
Increased the initial size of the type conversion table from
64 to 128 entries.
Reordered the 90 new integer conversion functions so the names
that are printed favor `int' over `short' or `long' when two
of them are the same.
./test/dtypes.c
Added hardware and software integer conversion tests for the
56 functions I added recently but not the additional 36
checked in this time. That will come next.
Call H5close() after each test so type conversion statistics
are easier to follow. Try this: $ HDF5_DEBUG=t ./dtypes
Added more debugging output for when things go wrong.
./src/H5private.h
Removed trailing carriage-returns inserted by broken operating
system ;-)
In machine (e.g. O2K) where long long and long are the same sizes, it
ended up defining GB8LL as 1 which is way too small for the dataset size.
Solution:
Add an entry to define GB8LL if long can hold it. When all fails,
define GB8LL as 0. During runtime, enough_room() will detect this
special value and skips the test.
Platform tested:
O2K IRIX64.
----------------------
./MANIFEST
Added new Pablo files HDF5record_RT.h and ProcIDs.h
./acconfig.h
./configure [REGENERATED]
./configure.in
./src/H5.c
./src/H5Vprivate.h
./src/H5config.h.in [REGENERATED]
./src/H5private.h
./src/H5public.h
./test/big.c
Added more configuration stuff for the Win32 environment. Removed all
the #ifdef WIN32 from the source and replaced them with OS-independent
stuff. Specifics follow:
Check for non-Posix.1 `st_blocks' field in `struct stat' which is used
by the big file test to decide if the file system supports holes. If
the st_blocks field isn't present then we just skip the test.
Configure checks for <io.h> <sys/resource.h> <sys/time.h> and
<winsock.h> and defines HAVE_IO_H, HAVE_SYS_RESOURCE_H,
HAVE_SYS_TIME_H and HAVE_WINSOCK_H when they're found.
Configure checks whether both <sys/time.h> and <time.h> can be
included and defines SYS_TIME_WITH_TIME if so. Otherwise include only
<sys/time.h> or <time.h> even if both exist.
Configure checks sizeof(__int64) and defines SIZEOF___INT64 to the
result or to zero if __int64 isn't defined. The source uses `long
long' in preference to `__int64'.
Removed null WIN32 definition for `inline' since such a definition
already exists in H5config.h
Protected gettimeofday() calls in debugging code with
HAVE_GETTIMEOFDAY instead of WIN32.
./src/H5F.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fstdio.h
./src/H5P.c
./src/H5Tconv.c
./src/H5private.h
Removed #include of system files from library source files and
consolodated them into H5private.h where they're protected by various
configuration macros (most of them were duplicated there already
anyway).
./test/big.c
./test/chunk.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
./test/fillval.c
./test/flush1.c
./test/flush2.c
./test/iopipe.c
./test/links.c
./test/mount.c
./test/mtime.c
./test/overhead.c
./test/ragged.c
./test/shtype.c
./test/unlink.c
Protected system #include's with #ifdef's from H5config.h.
Undefined NDEBUG since some of the tests rely on assert() to check
return values.
Removed WIN32 definitions for __unused__ since this can be controlled
by the definition of HAVE_ATTRIBUTE in H5config.h
./test/testhdf5.h
Removed the CLEAN_CMD definition because we no longer use it.
Albert's cleanup() functions replaced it.
./test/fillval.c
Initialized auto hid_t variables to fix warnings in error recovery
code when data flow analysis is turned on in compilers.
./test/h5tools.c
Initialized an auto variable to fix a compiler warning.
./test/chunk.c
./test/ragged.c
The WIN32 had some unsigned variables changed to signed because the
compiler generates warnings when coercing unsigned to double(?). I
changed them back to unsigned because they really are unsigned
quantities. If this the change was just to shut up extraneous warnings
then perhaps a compiler flag can do the same; otherwise if the
compiler generates bad code then we should supply a patch file instead
messing up source code with bug work-arounds.
./src/H5detect.c
Protected system #include's with #ifdef's from H5config.h thereby
removing a WIN32.
If getpwuid() doesn't exist (HAVE_GETPWUID) then we assume that
`struct passwd' doesn't exist either (we don't really need it in that
case).
The H5T_NATIVE_LLONG and H5T_NATIVE_ULLONG are defined in terms of
`long long' or else `__int64' or else `long' depending on what's
available.
./src/H5Flow.c
./src/H5Ofill.c
Added __unused__ to some function arguments that aren't used when
assertions are turned off.
./src/H5V.c
Changed an auto variable name in some hand-inlined code to get rid of
a warning about the variable shadowing a previous auto.
----------------------
./doc/html/H5.format.html
./src/H5HG.c
Fixed a bug in the global heap that caused H5HG_read() to
write past the end of the buffer in certain cases.
./test/big.c
The test is skipped if hdf5 was configured with
`--disable-hsizet'.
./src/H5Ofill.c
Data type conversions are implemented for the fill value.
./src/H5.c
Tracing prints one of H5P_FILE_CREATE, H5P_FILE_ACCESS,
H5P_DATASET_CREATE, H5P_DATASET_XFER, or H5P_MOUNT instead of
the more cryptic H5I_TEMPLATE_* constants.
./src/H5D.c
Removed prototype for H5D_find_name().
./src/H5I.c
The GROUP_MASK and ID_MASK are both calculated from GROUP_BITS
instead of being set by hand.
We don't use the sign bit of hid_t; all valid hid_t values are
positive so we can say things like `if ((file=H5Fopen(...))<0)'.
Changed `(int)pow(2.0,x)' to `1<<x' so we don't have to worry
about rounding.
Fixed H5I_get_type() so it doesn't always fail an assertion.
./src/H5E.c
./src/H5Epublic.h
Added minor error H5E_MOUNT
./src/H5F.c
./src/H5Fprivate.h
Added H5Fmount() and H5Funmount(). Mounting and unmounting
works as documented but some of the other things aren't
implemented yet, the biggest being current working groups
always acting on the root of the mount tree, and H5Fclose()
closing the entire tree. The rest of the stuff will be added
shortly...
./src/H5P.c
./src/H5Ppublic.h
Added the H5P_MOUNT property list but haven't implemented any
particular properties for it yet.
./src/H5Gstab.c
Hard links across files return an error instead of failing an
assertion.
----------------------
./Makefile.in
Running `make distclean' will not fail if one of the
subdirectories has already been cleaned.
./config/BlankForm
./config/irix5.3
Cleaned it up more. Added better support/documentation for
systems that have more than one compiler.
./config/alpha-dec-osf4.0 [NEW]
Added a new config file as a result of testing on Jim Reus's
machine.
./test/chunk.c
Scaled down the testing range so we can actually run it
interactively.
./tools/h5import.c
Included <unistd.h> to get rid of warning for close().
./src/H5detect.c
Seg-faults on Linux for some reason when NDEBUG is defined, so
I just undef it at the top of the source.
./test/big.c
Added a fflush().
./tools/h5ls.c
The `-d' flag now works even when `-v' isn't specified.
./examples/h5_chunk_read.c
./examples/h5_compound.c
./examples/h5_extend_write.c
./examples/h5_group.c
./examples/h5_read.c
./examples/h5_write.c
Indented according to hdf5 standards.
Fixed compiler warnings
----------------------
./config/solaris2.5
Hopefully set up now so it honors the CC and CFLAGS variables
and understands solaris cc flags.
./test/big.c
Checks to see if creating lots of large sparse files exceeds
the user disk quota and skips the test. It also checks that
we can actually open ~64 files at once.
./doc/html/Files.html
./src/H5A.c
./src/H5Aprivate.h
./src/H5F.c
./src/H5Fpublic.h
Added the H5Fflush() function which takes any object as an
argument as long as the object is in some way associated with
a file. This required an H5A_entof()
./src/H5.c
./src/H5Flow.c
The `%a' format of HDfprintf() now allows a field width and
justification flag etc, like the other formats. The old
H5F_addr_print() was recoded to call HDfprintf() instead of
vice versa.
----------------------
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsplit.c
Changed the allocation size request from `size_t' to `hsize_t'
because it was overflowing for the `big' test.
./src/H5detect.c
If `long double' and `double' are the same size then we define
H5T_NATIVE_LDOUBLE to be the same as H5T_NATIVE_DOUBLE.
Similarly for `long' vs. `long long' and `unsigned long' vs.
`unsigned long long'.
./test/Makefile.in
Added `big' to the list of tests to normally run.
./test/big.c
Added a check to see if the file system supports holes and if
it doesn't then the test is skipped.
----------------------
./html/Datasets.html
Fixed a couple of typos.
./src/H5.c
Added the `Z' modifier to HDfprintf() for `size_t' sizes. Use
it like this:
HDfprintf(stderr,"size is %Zd\n", (size_t)x);
./src/H5AC.c
./src/H5F.c
./src/H5Fprivate.h
The maximum number of meta data objects that can be cached can
be set from the application (but the library might not honor
it every time; it's a hint).
./src/H5D.c
Changed a warning message so it's not so alarming.
./src/H5Fistore.c
Chunks can be cached.
./src/H5O.c
./src/H5Oprivate.h
Added H5O_copy() and H5O_free() to copy and free messages.
./src/H5P.c
./src/H5Ppublic.h
Added H5Pset_cache() and H5Pget_cache() and changed lots of
"template" to "property list".
./src/H5Z.c
./src/H5Zpublic.h
Miscellaneous little things to clean up. Mostly just removed
H5Z_MAXVAL and added H5Z_USERDEF_MIN and H5Z_USERDEF_MAX.
./MANIFEST
./test/Makefile.in
./test/chunk.c [NEW]
Added a performance test for chunk caching. It looks at the
amount of I/O instead of timing because timing is partly
dependent on the chunk size and I wanted a measurement that
was a function of only the cache size. Run `chunk' with no
arguments and then say `gnuplot x-gnuplot' to see the plots
(press return between plots). Postscript files are created for
each plot.
./test/big.c
./test/cmpd_dset.c
./test/extend.c
./test/external.c
./test/gheap.c
Added H5F_ACC_DEBUG so we can see cache performance
statistics.
----------------------
./src/H5Bprivate.h
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fprivate.h
./src/H5Gpkg.h
./src/H5MF.c
./src/H5P.c
./src/H5Ppublic.h
./test/big.c
./html/Big.html
./html/Files.html
Family members can now be any size >1kB. Got rid of some
places where we were reading a property list after it was
closed.
./MANIFEST
./src/Makefile.in
./src/h5repart.c
A program to repartition file families. The source and/or
destination may be files or file families. Examples:
testhdf5 -c -o stab
h5repart -m 1m tstab2.h5 x%05d.h5
h5repart -m 100k x%05d.h5 y%05d.h5
h5repart y%05d.h5 z.h5
diff tstab2.h5 z.h5
./src/h5ls.c
Added a usage message, replaced assertions with error
messages.
./config/linux
Made a warning message more obvious. Added better
optimization flags for Pentium-Pro's.
./src/H5F.c
./src/H5G.c
./src/H5O.c
./src/H5Osdspace.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Z.c
./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/extend.c
./test/istore.c
Now that I have a home-grown version of Purify I fixed all the
leaks in all the test files.
----------------------
./html/H5.format.html
./src/H5E.c
./src/H5Epublic.h
./src/H5F.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gprivate.h
./src/h5ls.c
./test/Makefile.in
Symbolic links are now supported. The ./test/links program
will create a `links.h5' file that demonstrates hard links,
soft links, dangling links, and recursive links. A symbolic
link is a symbol table entity and doesn't have an object
header. It's format is described in H5.format.hml.
./src/H5G.c
./src/H5Gpublic.h
./src/h5ls.c
Implemented H5Gstat() and H5Gget_linkval() as documented by
Quincey. The `H5G_type_t type' field of `H5G_stat_t' was
changed to `int type' because H5G_type_t was already used and
the `type' data type should be open-ended.
./src/H5Ffamily.c
Removed an incorrect diagnostic message.
./test/big.c
Added read/write calls to test partial I/O to big contiguous
datasets. With no arguments it writes to a dataset and prints
the list of points written which should be redirected to a
file. With an argument (the name of a file containing the
stdout of a run with no arguments) values are read from the
dataset. One would typically say `big >x && big x'.
----------------------
./src/H5Osdspace.c
./html/H5.format.html
In the past we were allowed to have >2GB files on a 32-bit
machine as long as no dataset within the file was larger than
4GB (or whatever sizeof(size_t) is). That's been fixed now.
All dataset size calculations are done with `hsize_t' which is
normally defined as `unsigned long long'.
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fprivate.h
./src/H5P.c
./src/H5Ppublic.h
The file family member size can now be set/queried. The
default is still 64MB, but it can be set to 1GB by saying:
H5Pset_family (plist, 30, H5P_DEFAULT);
When opening an existing file family the specified
bits-per-member is ignored and the first member of the family
determines the bits-per-member, which can be retrieved with
H5Pget_family().
./acconfig.h
./configure.in
./src/H5config.h
./src/H5public.h
Added `--disable-hsizet' so that those with old GCC compilers
(<2.8.1) can still compile the code.
./src/H5.c
./src/H5private.h
Added HDfprintf() which works just like fprintf() except you
can give `H' as a size modifier for the integer conversions
and supply an `hsize_t' or `hssize_t' argument without casting
it. For instance:
hsize_t npoints = H5Sget_npoints(space);
HDfprintf(stdout,"Dataset has %Hd (%#018Hx) points\n",
npoints, npoints);
You can now give `%a' as a format to print an address, but all
formating flags are ignored and it causes the return value of
HDfprintf() to not include the characters in the address (but
who uses the return value anyway :-). Example:
H5G_t *grp;
HDfprintf(stdout, "Group object header at %a\n",
&(grp->ent.header));
Added HDstrtoll() which works exactly like [HD]strtol() except
the result is an int64.
./src/debug.c
Large addresses can now be entered from the command-line. Use
either decimal, octal (leading `0') or hexadecimal (leading
`0x') when giving the address.
./src/h5ls.c
The printf format for dataset dimensions was changed to `%Hu'
to support large datasets.
./test/big.c [NEW]
A test for big datasets on 32-bit machines. This test is not
run by default. Don't try to run it on an nfs-mounted file
system or other file system that doesn't support holes because
it creates two 32GB datasets of all zero.
