Bring r26513 from autotools_rework branch to trunk:
Remove the LDOUBLE_TO_LLONG_ACCURATE macro/define, it's working around
bugs in older SGI, HP/UX, MacOSX and Windows .NET 2003 compilers.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(Daily tested on branch for 2+ days)
Bring r26511 from autotools_rework branch to trunk:
Remove the FP_TO_INTEGER_OVERFLOW_WORKS macro/define, which is for working
around bugs in the Cray X1 compiler and is no longer supported.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(Daily tested on branch for 2+ days)
Bring r26508 from autotools_rework branch to trunk:
Remove HW_FP_TO_LLONG_NOT_WORKS macro/define, it was only addressing
Windows .NET 2003 compiler issues.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(Daily tested on branch for 2+ days)
Bring r26503 & r26528 from autotools_rework branch back to the trunk:
Remove old platform configure files: craynv, dec-flags, hpux11.23,
ia64-linux-gnu, nec-superux14.1, sv1-cray, x86_64-redstorm-linux-gnu
Also remove CONVERT_DENORMAL_FLOAT, since this was only set in the
configure files being removed.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(Daily tested on branch for 2+ days)
Bring r26502 from autotools_rework branch to trunk:
Remove the H5_SW_ULONG_TO_FP_BOTTOM_BIT_WORKS and
H5_FP_TO_ULLONG_BOTTOM_BIT_WORKS macros/defines, as they are no longer used by
supported platforms.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(Daily tested on branch for 2+ days)
Bring r26501 from the autotools_rework branch to the trunk:
Remove ULLONG_TO_LDOUBLE_PRECISION macro/define, as it's targeting bugs
in the FreeBSD and Cygwin compilers.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(Daily tested on branch for 2+ days)
Bring r26500 from autotools_rework branch to trunk:
Remove the LLONG_TO_FP_CAST_WORKS macro/define, as it targets problems with
the Visual Studio 6 compilers.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(Daily tested on branch for 2+ days)
Bring r26499 from autotools_rework branch to trunk:
Remove ULLONG_TO_FP_CAST_WORKS macro/define, as it only applies to older
platforms we aren't supporting any longer.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(Daily tested on branch for 2+ days)
Bring r26494 from autotools_rework branch back to trunk:
Remove the LDOUBLE_TO_UINT_ACCURATE macro/define, it was addressing
problems with older Intel compilers on Linux that are no longer supported.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(Daily tested on branch for several days)
Bring r26492 from autotools_rework branch back to trunk:
Remove the FP_TO_ULLONG_ACCURATE and FP_TO_ULLONG_RIGHT_MAXIMUM
macros/defines, which were added to address problems with older PGI
compilers and HP-UX systems and are no longer supported.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(daily tested on branch for >1 week)
Bring r26489 from autotools_rework branch to trunk:
Remove the ULONG_TO_FP_BOTTOM_BIT_ACCURATE macro/define, as it was added
for SGI systems and old Solaris systems, which are no longer supported.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(Daily tested for >1 week)
Bring r26485 from the autotools_rework branch to the trunk:
Remove the ULONG_TO_FLOAT_ACCURATE macro/define, we no longer support the
Sandia system where it was necessary.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(daily tested for >1 week)
Bring r26483 from autotools_rework branch back to trunk:
Remove INTEGER_TO_LDOUBLE_ACCURATE macro/define - we no longer support
SGI systems.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(daily tested on branch for >1 week)
Bring r26258 from the autotools_rework branch to the trunk - remove
the LDOUBLE_TO_INTEGER_WORKS macro/define, which was addressing issues with
SGI systems that are no longer supported.
Tested on:
Linux 2.6.x (jam) w/serial & parallel
Daily tested on branch for >2 weeks
Bring r26257 from autotools_rework branch back to the trunk - removes
the LDOUBLE_TO_INTEGER_ACCURATE macro/define, which was addressing problems
with SGI systems and is no longer supported.
Tested on:
Linux 2.6.x/32 (jam) w/serial & parallel
Daily tested on branch for >2 weeks.
branch.
Removed the configure option that allows selective disabling of individual
internal filters (fletcher32, shuffle, etc.).
This feature mucked up the code with a lot of #ifdefs, saved very little space,
and was not scalable to a general scheme for library size reduction. We've
decided to remove the feature while we investigate a more general scheme for
decreasing the library size.
Part of: HDFFV-9086
Tested on: h5committest
Cleans up time functions in the autotools input files. Removed deprecated
gettimeofday() time zone code and configure processing. Also removed
some unused time function configure checks and defines.
Fixes: HDFFV-9083 and HDFFV-9085
Tested on: 32-bit linux, serial and parallel (jam)
OS X (kite)
Solaris (emu)
Removes the --with-default-vfd option from configure. This was basically
useless and only allowed selecting the stdio VFD. Since this is a demo
VFD and not really a production VFD, we decided to retire this option.
Fixes: HDFFV-9081
Tested on: h5committest
NOTE: platypus cmake fails, but this is not a new error.
unsupported Code Warrior compiler. Also removes the H5_NO_SHARED_WRITING
symbol from the pubconf file.
Fixes: HDFFV-9080
Tested on: jam only, after bin/reconfigure
(all platforms should see no source changes)
- Remove Infering parallel compilers (C and Fortran) from configure.ac
- Remove restriction to build shared with parallel
- Cleanup parallel sections in configure.ac
- remove large file support checks
- MPE fixes.
tested with h5committest.
script. The warnings that this generates cannot easily be resolved in
platform-independent C code since gnu expects the non-standard (gnu)
'D' suffix for double constants.
It's still technically useful for catching float and long double
constants, but should probably be enabled by developers on an
as-needed basis for that purpose so the spurious warnings are
avoided.
Tested on a local linux VM with gcc 4.8.2. This is a very minor change.
Did not provide default values for clang++ options.
Also, applied wrong values for the *_CPPFLAGS.
Solution:
Added default values for *_CXXFLAGS.
Fixed the *_CPPFLAGS values.
Tested: wren with and without --enable-production.
Description:
Mac has changed to use the clang/clang++ compilers but compiler settings for production, debug and profile
were not setup.
Solution:
Setup default values for PROD_CFLAGS, PROD_CPPFLAGS, DEBUG_CFLAGS, DEBUG_CPPFLAGS.
PROFILE_CFLAGS and PROFILE_CPPFLAGS were set too but clang does not -pg or such for
profiling. Need to fix it later.
Tested: duck, swallow, and quail using --enable-production.
Bring changes from Coverity branch back to trunk:
r20914:
Use HDstrncpy and HDstrncat! --gh
20915:
Use HDstrncpy and HDstrncat! --gh
Tested on:
Mac OSX/64 10.9.3 (amazon) w/gcc 4.9.0, C++, FORTRAN & parallel
(too minor to require h5committest)
For make installcheck, compile and run installed examples using the installed scripts. They were being compiled but not run.
Add Fortran2003 examples to the run-ex-fortran script when fortran2003 is enabled.
Set flag to -O3 in production mode for Intel compilers other than those with specified other settings.
Gentoo patches:
Remove unnecessary setting of LD_LIBRARY_PATH from configure.
Prevent potential array subscript out of bounds error in perform/pio_engine.c and sio_engine.c.
Tested with h5committest on jam, koala, ostrich and platypus, on emu and kite, and parallel tests on jam, koala and platypus with mpich built with gnu 4.8.2 and with intel compilers.
Remove all traces of MPI-POSIX VFD and GPFS detection/code.
Remove remaining traces of stream VFD.
Remove testpar/t_posix_compliant test (it's not actually verifying anything).
Clean up H5D__mpio_opt_possible() further.
Moved environment variable that disables MPI collective operations into
MPI-IO VFD (instead of it being in src/H5S.c).
A few other small code cleanups.
Tested on:
Mac OSX/64 10.9.2 (amazon) w/parallel & serial
KitWare recommendations: Change CMake commands to lower case.
Bump up CMake minimum versions.
Split test file into separate file for h5repack test.
Tested: local linux
view objects. The addition of view objects in the fastforward project
is expected to be brough into the trunk sometimes in the future, which
is why we need to make this change.
Tested Manually on Jam and Ostrich.
Tested with h5commitest - Koala with intel compilers failed, but nothing had to do with those changes.
error on Koala: error while loading shared libraries: libirng.so
Description:
With optimization enabled, gcc 4.8 inserts garbage into the padding bytes of
floating point types when assigning from a literal constant. This caused
problems when H5detect.c scanned the bits in floating point types to determine
their properties.
Modified H5detect.c to scan for padding before further analyzing the type, and
to ignore all information in the padding areas. Also removed code that
temporarily disabled optimization.
Tested: jam, koala, ostrich, platypus (h5committest)
Clean up warnings, enable new compiler warning flag(s) and bring back
changes from Coverity branch:
r20813:
Remove the dead code as listed for coverity bug #1722. h5committested.
r20814:
Issue 69: Check return value and throw error if negative return. Also free datatype id on error
r20815:
Use HDstrncpy. --gh
r20816:
Replaced one last HDstrcat call with HDstrncat to resolve coverity issue 832.
r20817:
Use HDstrncpy and HDstrncat. --gh
r20818:
Purpose: Fix valgrind issues with h5jam
Description:
Modified h5jam to free strings strdup'd in parse_command_line before exit. Note
that they may still not be freed in case of error, due to the widespread use of
exit().
r20819:
Issue 80: change loop to use int as loop index.
r20820:
Maintenance: Fixed the bug found by coverity CID 788
There were two problems with this function:
1) it tried to unnecessary free NULL pointer
2) it tried to allocate c_name buffer that is done by H5Pget_class_name
Tested on:
Mac OSX 10.8.4 (amazon) w/gcc 4.8.1, C++ & FORTRAN
(too minor to require h5committest)
problem in H5detect.c (uninitialized buffer) and provided the solution. I checked it in yesterday. But it
turned out to be a false fix. So I'm back it out.
Tested on jam - reverse of changes.
problem in H5detect.c (uninitialized buffer) and provided the solution. Allen and I verified it.
Tested with h5committest and CMake on jam, koala, ostrich, playtus, and Allen's virtual machine.
The new gcc v4.8.* compilers does not work well with dt_arith which failed
in production mode.
Solution:
A temporary patch by removing any optimization (-O*) from the PROD_CFLAGS
so that dt_arith will pass for now. A more through investigation is needed.
Tested: Jam and Koala where it failed and now passes.
Fixes for HDF5 1.8.10 p1
HDFFV-7975
Changed the max single I/O operation size on Darwin/Mac OS X.
HDFFV-8124 and HDFFV-8158
Fixed a core VFD bug when large blocks of data are read.
HDFFV-8246
Added more fields to the VFD read/write error messages.
Tested on:
64-bit Windows 7, Visual Studio 2010, CMake
64-bit Mac OS X Snow Leopard (Fred), Fortran, C++
64-bit BE Linux (Ostrich), Fortran, C++
32-bit LE Linux (jam), Fortran, C++ (also parallel w/ Fortran)
dt_arith would fail in Lion and Mountain Lion system when GCC version 4.2.1
is used with --enable-production. Somehow the -O optimization will fail some of
the hard conversion code.
Solution:
This is just a temporary patch by detecting if this is a Lion or Mountain Lion
system using GCC 4.2.1, then just remove the any -O option from the PROD_CFLAGS.
A better fix should be deviced later.
Tested: Duck(lion) and Owl (mountain lion) tested with --enable-production.
Also tested in Fred and Tejeda, both Snow Leopard systems to verify there is
no undesired side effect.
Description: The Fortran compiler flags were all set to "-O". They should be
different setting for different situations. E.g, "-g" for debug and
"-pg" for profile, etc.
Fix: set them to appropriate different values.
Tested: in Remote ADA AIX machines using 3 different settings:
configure --enable-fortran --enable-cxx # default to --disable-production
configure --enable-fortran --enable-cxx --enable-production
configure --enable-fortran --enable-cxx --disable-production
