Changed the test to run Huge Dataset (tens of GB), Xtra large dataset(4GB big),
Large dataset (2GB big), or merely 1GB big, depending on if the file system
supports sparse file or if it supports larger than 32bigs I/O.
Tested: h5committest, jam (serial), Windows (Bangan which is Windows 7, 32bits).
Description:
test/big incorrectly determined not able to write files larger than 2GB and
skipped the SEC2 and STDIO driver tests. The reason was because it was using
off_t while the SEC2 driver is using lseek64 which expects off64_t type.
Solution:
Created a new HDoff_t which is set to off_t or off64_t or other appropriate
type depending on which of lseek or lseek64 is available. Changed SEC2 file
driver and the big test to use this common definition.
Tested:
In BP (AIX), using --enable and --disable-largefile, for both 32 and 64 bits
modes. Did not do h5committest because: 1. the error was exposed in the remote
BP machine; 2. the change is trivial.
Note that STDIO driver failed when --disable-largefile is used. That is an
error in the STDIO driver code that is being fixed.
Bring r16846 from revise_chunks branch back to trunk:
Fix broken (for how long?) H5_ASSIGN_OVERFLOW macro to actually detect
overflows during assignments, along with several errors it [now] detected.
Cleaned up a fix minor warnings and/or pieces of code also.
Tested on:
FreeBSD/32 6.3 (duty) in debug mode
(h5committest not needed - multi-platform test performed on branch)
Bring file free space branch changes through r15795 into trunk, which
includes a fair bit of code cleanup & rearrangement along with a couple of
bug fixes also.
Tested on:
Mac OS X/32 10.5.5 (amazon) in debug mode
Mac OS X/32 10.5.5 (amazon) w/C++ & FORTRAN, w/threadsafe,
in production mode
FreeBSD/32 6.3 (duty) in debug mode
FreeBSD/64 6.3 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/Intel compilers w/default API=1.6.x,
w/C++ & FORTRAN, in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
Linux/64-amd64 2.6 (abe) w/parallel, w/FORTRAN, in production mode
Remove trailing whitespace from C/C++ source files, with the following
script:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Tested on:
Mac OS X/32 10.5.5 (amazon)
No need for h5committest, just whitespace changes...
Make H5Dopen versioned and change all internal usage to use H5Dopen2
Add simple regression test for H5Dopen1
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Pursue calls to H5Gcreate() relentlessly and ruthlessly exterminate
them, leaving only a few tame specimens in text files and comments. ;-)
Tested on:
Mac OS X/32 10.4.10 (amazon)
FreeBSD/32 6.2 (duty)
FreeBSD/64 6.2 (liberty)
Linux/32 2.6 (kagiso)
Linux/64 2.6 (smirom)
Solaris/32 5.10 (linew)
files. 2. added a check in test/big.c to make sure the system supports big file.
Tested on smirom because already tested the same changes for v1.6 on liberty, smirom,
copper, and sol.
check if fseeko is available. Using it instead of fseek can support
big files because the offset is of type off_t not long int. Also
added the test for STDIO in big.c.
Tested platform:
Kagiso only since it is only a comment block change. If it works in one
machine, it should work in all, I hope. Still need to check the parallel
build on copper.
Code cleanup
Description:
Trim trailing whitespace, which is making 'diff'ing the two branches
difficult.
Solution:
Ran this script in each directory:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Platforms tested:
FreeBSD 4.11 (sleipnir)
Too minor to require h5committest
Purpose:
Bug fix
Description:
test/big fails randomly with a message warning of 'possible overlap.'
Solution:
Have the random number generator check each value to make sure a write at
that position doesn't overlap any previous write.
Platforms tested:
sleipnir, modi4, eirene
Bug Fix/Code Cleanup/Doc Cleanup/Optimization/Branch Sync :-)
Description:
Generally speaking, this is the "signed->unsigned" change to selections.
However, in the process of merging code back, things got stickier and stickier
until I ended up doing a big "sync the two branches up" operation. So... I
brought back all the "infrastructure" fixes from the development branch to the
release branch (which I think were actually making some improvement in
performance) as well as fixed several bugs which had been fixed in one branch,
but not the other.
I've also tagged the repository before making this checkin with the label
"before_signed_unsigned_changes".
Platforms tested:
FreeBSD 4.10 (sleipnir) w/parallel & fphdf5
FreeBSD 4.10 (sleipnir) w/threadsafe
FreeBSD 4.10 (sleipnir) w/backward compatibility
Solaris 2.7 (arabica) w/"purify options"
Solaris 2.8 (sol) w/FORTRAN & C++
AIX 5.x (copper) w/parallel & FORTRAN
IRIX64 6.5 (modi4) w/FORTRAN
Linux 2.4 (heping) w/FORTRAN & C++
Misc. update:
Code cleanup
Description:
At user's suggestion, convert some "naked" standard library calls to use
the HD*() macros.
Platforms tested:
FreeBSD 4.10 (sleipnir)
Too minor to require h5committest
Purpose: This a fix for bug #921
Description: On platforms where big test runs, it creates a set of
"solid" 1GB files. Test will take forever (modi4) or will fail
if quotas are exceeded.
Solution: Default library behavior is to allocate dataset space earlier and
to write fill values. I changed the test to use late space allocation
and never write fill values.
Platforms tested: True64 (PSC), modi4 (sequential and parallel), arabica with 64-bit
option(test was skipped there). I also enabled szip and it passed :-)
Misc. update:
Update
Description:
Updated the Copyright statement
Platforms tested:
Linux (This change is only in the comments, so I just check that the
modules still compile)
Misc. update:
Migrate from configure macros of XYZ_ABC to H5_XYZ_ABC
Description:
configure generates many macros definitions on the fly and
were stored in src/H5config.h which is included by H5public.h.
But other software that uses hdf5 may also run their own configure.
There can be a clash in macro name space. We decided awhile ago
to prepend all generated macros with "H5_" to avoid conflicts.
The process has started and this commit completes it (at least attempt
to).
Solution:
Many macros symbols (e.g. SIZEOF_xxx and HAVE_xxx were changed to
H5_SIZEOF_xxx and H5_HAVE_xxx). Then H5private.h no longer includes
H5config.h. This cuts H5config.h away from HDF5 source code.
Pending issues:
The module of fortran and pablo are to be resolved in a different
commit.
Platforms tested:
eirene (parallel), arabica (solaris 7 --enable-fortran, --enable-cxx)
Feature
Description:
Added option -c to allow skipping file system Checking. This allows
users to run the test even if the program thinks it may fill up the
file system.
Platforms tested:
eirene
Code cleanup
Description:
Platform dependent code related to the struct stat and fstat
calls polluted source codes. Hard to maintain.
Solution:
Platform dependent code are moved to H5private.h and then internal
code can #include H5private.h. Repeat those macro definition for
the stdio and multi drivers since they area examples for writing
a virtual file driver. They must not use any internal code.
Platforms tested:
eirene (parallel), modi4 (serial including gass driver.)
feature
Description:
Added -fsize <fsize> option which controls the family file size
used. This can be used to test the file size limits of a machine
or file system.
Platforms tested:
modi4 (passed even 20GB file size).
Eirene (started to fail when 2GB is used. Expected since linux 2.2
does not support large than 2GB file size.)
burrwhite (passed up to 4GB. Expected since Linux 2.4 supports larger
than 2GB file size.) Then it failed at 4GB and beyond. This is
probably a bug in the family file driver.
Code cleanup
Description:
I had moved an fclose() in my earlier fix and it could lead to a resource
leak in certain error conditions.
Also, prepared file for Albert to expand to test with files larger than
2GB... :-)
Solution:
Moved fclose() call back to original position.
Put in type cast for FAMILY_SIZE macro.
Platforms tested:
FreeBSD 4.4 (hawkwind)
Bug fix
Description:
'big' test was not detecting that the AFS quota had been hit when running
under FreeBSD.
Solution:
Amending quota checking code to detect errors on file closes as well as
opens, seeks and writes.
Platforms tested:
FreeBSD 4.4 (hawkwind)
Feature shift
Description:
Take out the v1.2.x compatibility stubs and put in the hooks for v1.4.x
compatibility when needed.
Platforms tested:
FreeBSD 4.3 (hawkwind)
Update
Description:
Changed includes of the form:
#include <hdf5_file.h>
to
#include "hdf5_file.h"
so that gcc can pick them up easier without including the system
header files since we don't care about them.
Platforms tested:
Linux
Clean up warnings
Description:
The "FAILED" macro is defined by Windows and is causing warnings and
potential errors when compiled on that platform.
Solution:
Change our macro from FAILED to H5_FAILED.
Platforms tested:
FreeBSD 4.2 (hawkwind)
Code cleanup.
Description:
Fixed _lots_ (I mean _tons_) of warnings spit out by the gcc with the
extra warnings. Including a few show-stoppers for compression on IRIX
machines.
Solution:
Changed lots of variables' types to more sensible and consistent types,
more range-checking, more variable typecasts, etc.
Platforms tested:
FreeBSD 4.2 (hawkwind), IRIX64-64 (modi4)
Backward compatibility code
Description:
Add in code to allow the library to emulate the v1.2 API and behavior.
Platforms tested:
FreeBSD 4.2 (hawkwind)
The "FILENAME" declared extern in h5test.h is not always used.
It was used in h5_cleanup to remove temporary files created
during tests. Not all tests codes have used this routine.
Indeed, quite a few of test programs do "#define FILENAME ".
Also, h5_cleanup needs to work in tandem with h5_fixname.
h5_fixname accepts an explicite base_name argument instead
of using the global variable FILENAME. That is cleaner.
Solution:
Added char *base_name[] as a new argument to h5_cleanup, in
the same style as h5_fixname. Removed "extern char *FILENAME..."
from use. Also, undo some unnecessary declaration of "char *FILENAME"
from some tests which don't use it at all (yet).
Platforms tested:
modi4-64(irix64), arabica(solari2.7), eirene(linux)
(arabica could not launch tests automatically. I had to hack
in LD_LIBRARY_PATH to make them run.)
** configure.in
** configure [REGENERATED]
** src/H5private.h
** src/H5public.h
** src/Makefile.in
Generates an H5pubconf.h file which is just like H5config.h except all
the preprocessor symbols have `H5_' prepended. This was done so that
the configuration results can be used in public header files without
polluting the namespace.
** src/H5.c
Added H5I_REFERENCE and H5I_VFL to the API tracing code so their names
are printed instead of just numbers.
** src/H5FDstdio.c
** tools/h5import.c
** tools/h5repart.c
** tools/pdb2hdf.c
Changed to use the `H5_' versions of configure results since these
files include only the public API.
** test/big.c
Removed a compiler warning.
** test/h5test.c
Removed unused code.
----------------------
./MANIFEST
./src/H5FDmulti.c [NEW]
./src/H5FDmulti.h [NEW]
./src/Makefile.in
./src/hdf5.h
The split driver was reimplemented as a more general "multi"
driver which is capable of splitting data into multiple files
like the family driver except the partioning is done by memory
usage type instead of address. The H5Pset_fapl_split()
function just calls H5Pset_fapl_multi() with arguments which
prepare to split the address space into two files: meta and
raw data.
This is the first version. I plan to allow the open() call to
relax a bit which would allow one to open an hdf5 file when
only the meta-data file is present. This would allow a very
large file to be split and stored on tape and the relatively
small meta file to be mirrored on disk to allow limited
browsing of the file (any request for raw data would fail).
./src/H5private.h
./src/H5F.c
./src/H5FD.c
./src/H5FDprivate.h
./src/H5FDpublic.h
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDmpio.c
./src/H5FDsec2.c
Added the ability for a file driver to store information in
the superblock which would be needed if the file were opened
again later for reading. The format is driver-defined which
allows users to extend it however they like.
./doc/html/H5.format.html
Added information about the new driver information block of
the superblock. This is where file drivers store information
they need in order to reopen the file later.
./src/H5F.c
./src/H5Fprivate.h
./src/H5FD.c
./src/H5FDprivate.h
./src/H5FDpublic.h
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5Fistore.c
./src/H5R.c
The file access properties and the file access property list
were decoupled, which allows the property list to more cleanly
contain properties for various levels of the file and which
allows the property list to be modified more cleanly when
opening files.
./src/H5.c
./src/H5FDpublic.h
Removed H5FD_MEM_META and H5FD_MEM_GROUP since they're never
used.
./src/H5D.c
Changed the way we detect the MPIO driver in all these special
cases.
./src/H5F.c
./src/H5Rpublic.h
./test/tfile.c
The default file sizeof(offset) was changed to be a function
of haddr_t instead of hsize_t.
THE H5RPUBLIC.H DEFINITIONS WILL HAVE PROBLEMS IF THE USER
CREATES A FILE WITH NON-DEFAULT OFFSET AND SIZE SIZES!
./src/H5F.c
Fixed an uninitialized memory access bug in file closing
related to the VFL.
./src/H5T.c
./src/H5Tpublic.h
Added an H5T_NATIVE_HADDR predefined datatype which
corresponds to the `haddr_t' type.
./test/Makefile.in
Reformatted long lines.
./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
Removed the H5F_ACC_DEBUG flag from file creation/open calls.
./test/big.c
Plugged a memory leak.
./test/h5test.c
Added support for the `multi' driver.
Removed #warning about not having the stdio driver. Plans are
to not implement it since the sec2 driver serves the same
purpose and testing didn't show any difference in execution
times between the two.
----------------------
This extensive change is the virtual file layer implementation. I've
ported and tested the sec2, family, and core drivers and only ported
the mpio driver (Albert will test it). So if you need MPIO I would
recommend sticking with the previous version for a while.
You will get a few compile warnings about split and stdio drivers not
being implemented and possibly tracing information not inserted in
some of the drivers. You can safely ignore them but I plan to fix
them.
I'm still working on the split driver because I just realized that it
needs a part of the VFL that isn't written yet.
Documentation is being updated also because there were some minor
changes (mostly just name changes). It should be available on my web
site later this week.
./MANIFEST
./src/Makefile.in
./src/hdf5.h
./src/H5Flow.c [REMOVED]
./src/H5Fstdio.c [REMOVED]
./src/H5Fsec2.c [REMOVED]
./src/H5Fsplit.c [REMOVED]
./src/H5Fmpio.c [REMOVED]
./src/H5Ffamily.c [REMOVED]
./src/H5Fcore.c [REMOVED]
./src/H5MFpublic.h [REMOVED]
./src/H5FD.c [NEW]
./src/H5FDcore.c [NEW]
./src/H5FDcore.h [NEW]
./src/H5FDfamily.c [NEW]
./src/H5FDfamily.h [NEW]
./src/H5FDmpio.c [NEW]
./src/H5FDmpio.h [NEW]
./src/H5FDprivate.h [NEW]
./src/H5FDpublic.h [NEW]
./src/H5FDsec2.c [NEW]
./src/H5FDsec2.h [NEW]
Removed/added files for virtual file layer.
./bin/trace
./src/H5.c
Removed unused public datatypes and added new VFL public
datatypes.
Changed an error message.
./config/BlankForm
./config/dec-flags
./config/gnu-flags
./config/hpux10.20
./config/hpux9.03
./config/irix5.x
./config/irix6.x
./config/solaris2.x
./config/unicosmk
Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the
configuration since they're no longer applicable. The default
file driver is always the sec2 driver and it always optimizes
calls to lseek() or lseek64().
./config/depend.in
C preprocessor errors generated during automatic dependency
building are sent to /dev/null to prevent them from appearing
twice in the make output.
./src/H5AC.c
./src/H5B.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Oshared.c
./src/H5T.c
./src/H5detect.c
./test/ohdr.c
Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent
with the `haddr_t' datatype which is now a public type.
./src/H5D.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5Tconv.c
./test/cmpd_dset.c
./test/dsets.c
./test/overhead.c
./test/tselect.c
./test/tvltypes.c
The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER
because the properties apply to all types of I/O operations,
not just datasets.
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5R.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Spoint.c
./src/H5Sprivate.h
./test/big.c
./test/h5test.c
./test/istore.c
./testpar/t_dset.c
./testpar/t_file.c
./tools/h5debug.c
./tools/h5ls.c
Modified to work with the virtual file layer by calling H5FD_*
functions instead of H5F_low_* functions and by passing file
access and data transfer properties by object ID instead of
pointer.
Changed H5D_transfer_t to H5FD_mpio_xfer_t since the
COLLECTIVE vs. INDEPENDENT transfer mode is specific to the
MPIO file driver.
Moved MPIO-specific stuff into the MPIO driver.
./src/H5B.c
./src/H5D.c
./src/H5Fprivate.h
The H5F_mpio_* private functions were renamed and placed in
the H5FDmpio driver except those which appeared in H5Smpio.c.
./src/H5E.c
./src/H5Epublic.h
Added major error number H5E_VFL for virtual file layer
related errors.
./src/H5F.c
./src/H5Fprivate.h
Changed the logic that controls whether the boot block is
written. Instead of assuming that the first call to write the
boot block is only to allocate space, I've added a function
argument which makes this explicit.
Changed the way files are compared so that a driver-defined
comparison function can be called. Files which belong to
different drivers are always considered different.
Removed H5F_driver_t since file drivers are now identified by
object ID instead of a special non-user-extendible datatype.
Removed all the hard-coded low-level file properties which
have been replaced by the various file drivers.
./src/H5I.c
./src/H5Iprivate.h
Added the H5I_inc_ref() which was removed a few months ago
since we finally have a use for it.
./src/H5Ipublic.h
Added the H5I_VFL object ID type to identify file drivers in
the virtual file layer.
./src/H5MF.c
./src/H5MFprivate.h
Moved all the allocation/deallocation code into the virtual
file layer which allows file drivers to override much of it.
./src/H5P.c
./src/H5Ppublic.h
Moved file driver-specific code into the various file driver
files.
The H5Pcopy() and H5Pclose() functions make calls into the
virtual file driver to manage the memory for driver-specific
file access and data transfer properties.
./src/H5private.h
./src/H5public.h
The `haddr_t' type is now public.
./test/tfile.c
Added a few more comments.
----------------------
./config/irix64
The old (-32) compiler is now supported by setting envrionment
CC='cc -32'. The -64 compiler is the default or you can set
CC='cc -64'.
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5G.c
./src/H5I.c
./src/H5Ocomp.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5T.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5Z.c
./src/H5detect.c
./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/enum.c
./test/mtime.c
./test/ohdr.c
./tools/h5ls.c
Fixed lots of warnings on Irix64. Mailed a few remaining
warnings in H5S to Quincey and a few in the dumper to
Ruey-Hsia.
----------------------
./src/H5T.c
Fixed a typo in the registration of the `unsigned char' to
`unsigned long long' type conversion that caused it to not be
registered, falling back to software whenever that conversion
path was taken.
./MANIFEST
./test/Makefile.in
./test/testhdf5.c
./test/testhdf5.h
./test/theap.c [REMOVED]
./test/lheap.c [NEW]
./test/tohdr.c [REMOVED]
./test/ohdr.c [NEW]
./test/tstab.c [REMOVED]
./test/stab.c [NEW]
Removed the `t' from the front of these names and made each
test a stand-alone program following the format of most of the
other tests.
./test/big.c
Uses libh5test.a but always sets the low-level driver to 1GB
file family.
The `#if' near the top to set the data space to 8GB has been
simplified now that `long_long' is always defined and the
error message is improved when `long_long' isn't wide enough.
Cleanup code was added to the error handling.
./test/gheap.c
./test/istore.c
Uses libh5test.a. Added error cleanup code.
./test/dtypes.c
./test/h5test.c
Added 68 new tests that check hardware and software
conversions between `long long' and `unsigned long long' and
the other integer types. The tests only run on machines where
sizeof(long_long)!=sizeof(long). We test a total of 180
different integer conversions, half in hardware and half in
software.
Cut down the number of times each test is run from 5 to 1 so
it doesn't take so long. If you want to run more times
there's a constant that can be changed at the top of the file.
./test/extend.c
Removed unused variable.
./test/h5test.c
./test/h5test.h
./test/external.c
./test/fillval.c
The h5_cleanup() returns true/false so it can be used in an `if'
statement to clean up additional files.
./doc/html/Environment.html
Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions.
./src/H5P.c
Changed the trace type for the second argument from `Iu' to
`x' since it's an output parameter.
./INSTALL
Added a warning that the GNU zlib that comes with the latest
version of HDF4 is too old to use with HDF5 and must be
renamed so configure doesn't see it when `--enable-hdf4' is
used.
----------------------
./test/flush2.c
./test/overhead.c
Removed carriage-returns inserted by a broken operating system.
./test/big.c
./test/mtime.c
./test/ragged.c
./tools/h5ls.c
Removed inclusion of <H5config.h>, system header files, and definition
of __unused__ since this all happens in <H5private.h>.
./test/chunk.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
./test/fillval.c
./test/flush1.c
./test/flush2.c
./test/iopipe.c
./test/links.c
./test/mount.c
./test/overhead.c
./test/shtype.c
./test/unlink.c
./tools/h5import.c
./tools/h5repart.c
Removed inclusion of <H5config.h> since <hdf5.h> includes it.
./test/flush1.c
Includes <stdlib.h>, protects inclusion of <unistd.h> by using
HAVE_UNISTD_H instead of STDC_HEADERS.
