ib files. The fix also removed dependencies on libhdf5, etc. when the --disable-sharedlib-rpath co
nfigure option was invoked.
Added instead configure variable hardcode_into_lib=no. This removes rpath from lib files on Linux
and solaris machines.
Tested with h5committest on jam, koala, ostrich and platypus (cmake), and with configure option --disable-sharedlib-rpath on emu, platypus and quail.
For make installcheck, compile and run installed examples using the installed scripts. They were being compiled but not run.
Add Fortran2003 examples to the run-ex-fortran script when fortran2003 is enabled.
Set flag to -O3 in production mode for Intel compilers other than those with specified other settings.
Gentoo patches:
Remove unnecessary setting of LD_LIBRARY_PATH from configure.
Prevent potential array subscript out of bounds error in perform/pio_engine.c and sio_engine.c.
Tested with h5committest on jam, koala, ostrich and platypus, on emu and kite, and parallel tests on jam, koala and platypus with mpich built with gnu 4.8.2 and with intel compilers.
AIX compiler complains that:
ex_ds1.f90, line 89.16: 1512-050 (W) Field separator is missing, in literal FMT specifier, after edit descriptor X. A comma is assumed.
Line 89:
WRITE(*,'(/,5X 3(A,1X),I0,A,L1)') 'Is',TRIM(DS_1_NAME),&
Solution:
Added the missing comma after "5X".
Tested:
AIX system.
Remove all traces of MPI-POSIX VFD and GPFS detection/code.
Remove remaining traces of stream VFD.
Remove testpar/t_posix_compliant test (it's not actually verifying anything).
Clean up H5D__mpio_opt_possible() further.
Moved environment variable that disables MPI collective operations into
MPI-IO VFD (instead of it being in src/H5S.c).
A few other small code cleanups.
Tested on:
Mac OSX/64 10.9.2 (amazon) w/parallel & serial
KitWare recommendations: Change CMake commands to lower case.
Bump up CMake minimum versions.
Split test file into separate file for h5repack test.
Tested: local linux
KitWare recommendations: Change CMake commands to lower case.
Bump up CMake minimum versions.
Split test file into separate file for h5repack test.
Tested: local linux
behind by "make distclean" (see below); modified appropriate Makefile.am files and ran
bin/reconfigure to create Makefile.in to fix the problem.
Here is the list of the files "make disclean" doesn't remove:
tools/h5dump/testfiles
tools/h5repack/testfiles/h5diff_attr1.h5
tools/h5repack/testfiles/tfamily00000.h5
tools/h5repack/testfiles/tfamily00010.h5
tools/h5repack/testfiles/tfamily00002.h5
tools/h5repack/testfiles/tfamily00004.h5
tools/h5repack/testfiles/tfamily00006.h5
tools/h5repack/testfiles/tfamily00008.h5
tools/h5repack/testfiles/tfamily00001.h5
tools/h5repack/testfiles/tfamily00003.h5
tools/h5repack/testfiles/tfamily00005.h5
tools/h5repack/testfiles/tfamily00007.h5
tools/h5repack/testfiles/tfamily00009.h5
tools/h5jam/testfiles/h5jam-ub-nohdf5.txt.err-sav
tools/h5jam/testfiles/h5jam-help.txt.err-sav
tools/h5jam/testfiles/h5unjam-help.txt.err-sav
tools/h5jam/testfiles/h5jam-ub-nohdf5.txt.out-sav
tools/h5jam/testfiles/h5jam-help.txt.out-sav
tools/h5jam/testfiles/h5unjam-help.txt.out-sav
hl/fortran/test/dsetf5.h5
c++/test/tattr_multi.h5
c++/test/tattr_scalar.h5
c++/test/tfattrs.h5
c++/test/tattr_basic.h5
c++/test/tattr_compound.h5
c++/test/tattr_dtype.h5
Tested on jam and emu in place and using srcdir with the svn stat command.
This fix doesn't address two problems:
tool/h5dump/testfiles directory is not removed by "make distclean" and it should be
tools/misc/testfiles directory is removed by "make distclean" and it shouldn't be
Prep work for adding a memory free function, part of HDFFV-8551.
Tested on:
32-bit LE linux (jam)
* with C++, Fortran
* with thread safety on
These are minor changes (almost entirely renaming foo functions
to HDfoo) that don't change functionality. This should not
require a full commit test.
Ran bin/reconfigure to update the Makefile.in in directories not part of the fortran directory check=in. Updates Makefile.in due to changes made in configure.in for the Fortran 2003 additions.
Tested on all platforms run under daily tests.
Switch from H5P_DATASET_ACCESS_DEFAULT to H5P_DEFAULT for calls to
H5Rdereference2().
Tested on:
Mac OS X/32 10.6.8 (amazon) w/debug
(too minor to require h5committest)
General shared library improvements for CYGWIN / AIX
Description:
Shared libraries are disabled on both CYGWIN and AIX due
to inability to build them correctly. Part of the problem
in both of these situations is the lack of the libtool
flag -no-undefined, which tells libtool that all needed
symbols are defined at link time (a requirement on these
systems) and that it's okay to build shared libraries.
Another problem are lack of dependencies between wrapper
libraries and core C HDF5 library.
This patch addresses both of these by fixing configure to
add in -no-undefined flag for libtool during linking and
adds automake dependencies in the Makefile.am files.
After testing, both CYGWIN and AIX now generate shared
libraries, but there are still some test failures in each.
(cache_api, dt_arith, and testerror.sh on CYGWIN, and
fortran tests on AIX).
Even though the shared libraries are not quite perfect,
this is a general improvement to what we had before, so
I'm applying the patch anyways. Note that default behavior
of shared libraries on these systems being disabled has
NOT been changed and requires the use of the
--enable-unsupported to attempt to build them.
We will need to address the test failures in each
architecture prior to formally supporting shared
libraries on each.
Tested:
h5committested & CYGWIN tested (on bangan)
(AIX tested by Albert on bp-login2)
Add "silent make" mode configure option.
Description:
Automake 1.11 has a new option available that allows for a
silent make mode. This functionality needs to be explicitly
enabled in configure.in via the use of the automake macro
AM_SILENT_RULES, which is what this commit is adding.
This introduces a new configure option:
--{en|dis}able-silent-rules
This option is on by default, and simplies compile and link
line outputs when building the library. Disabling this option
will print full "verbose" output (i.e., full compile and
linking lines for each target).
Tested:
This was tested on jam & h5committested
Fixed issue HDFFV-5866 (BZ 2156). Changed scripts to run examples to use specific names for compiled executable files instead of a.out, which did not work on Cywin as it produces a.exe by default. Removed issue from known problems section of RELEASE.txt.
Tested with Cygwin 1.7.8 on Windows 7.
This line, and those below, will be ignored--
M release_docs/RELEASE.txt
M hl/c++/examples/run-hlc++-ex.sh.in
M hl/fortran/examples/run-hlfortran-ex.sh.in
M hl/examples/run-hlc-ex.sh.in
M c++/examples/run-c++-ex.sh.in
M fortran/examples/run-fortran-ex.sh.in
M examples/run-c-ex.sh.in
- Revise shared Fortran library disabling scenarios in configure
- Improve configure output summary
Description:
Shared Fortran libraries are not supported on Mac, but were being
disabled by configure in a way that also forced the C libraries
to be static-only. This has been fixed, so now only shared Fortran
is disabled while shared C can remain.
This prompted two additional changes:
1. While working on the check that addresses whether or not
shared Fortran libraries are allowed, removed old and no
longer needed check(s) that disable shared Fortran
libraries with HP, Intel 8, PGI, and Absoft compilers.
(Essentially, Mac is the only situation in which Fortran
shared are disabled by configure.)
2. Having two different states of libraries (i.e. shared C
library with static-only Fortran library) was not apparent
in the configure summary, which labeled all libraries as
either shared and/or static. I've added lines to both the
C++ and Fortran output sections to list shared/static-ness
of these libraries specifically.
Additionally, I've made sure that the new --enable-unsupported
configure option correctly overrides configure if it tries to
disable a shared library.
Tested:
jam, fred, & h5committest
* Fixed error in passing an array of characters with different length
field names for h5tbmake_table.
* Fixed error in h5tget_field_info_f with packing the C strings
into a fortran array of strings.
* Added optional arguement to h5tbget_field_info_f called maxlen
which returns the maximum string character length in a field name
element.
* Uncommented out test for h5tbget_field_info_f in the test program
and added additional checks for the output.
Tested: jam (intel and gnu compilers)
Bring Coverity revisions from branch back to trunk, and clean up some other
misc. compiler warnings also.
r19500:
Fix coverity items 1446 and 1447. Moved up calls to memset in test_cont in
ohdr.c so the test never tries to close uninitialized locations.
r19501:
Fix coverity items 1398-1445. Various uninitialized variable errors in fheap.c.
r19502:
Fixed coverity issue 579 and some additional warnings in the file as well.
r19503:
Bug fix: This fix addressed the "RESOURCE_LEAK" problems #789 and 790, run 26
r19504:
minor mods to try to keep coverity from flagging false positives.
r19505:
Fixed coverity issues 566 - 571. Declared variables that are passed to functions that use them as arrays to be arrays of size 1.
Tested on:
Mac OS X/32 10.6.4 (amazon) w/debug, production & parallel
(h5committested on trunk)
Corrected use/name of source folder aliases.
Duplicated FindMPI.cmake so that non-c++ compiler is found first (recommemded commands did not work).
Tested: local linux with mpich
- Add an install rule to copy compiled fortran module files
- Only build the xlatefile utility if testing and tools are enabled
- Don't do MPI HAVE_XXX checks until MPI_FOUND is true
- Install needs H5version.h & H5overflow.h to be copied
- Add debug information flags to debug compile and link lines for win32 Intel compiler
Improve configure's large-file support control.
Description:
Modified configure to now attempt to add defines necessary for
supporting largefiles on all systems, instead of solely on linux. This
is in response to user requests to enable largefile support on Solaris
by default, as well as to give extra control on AIX (instead of just
jamming the necessary flag into the config files).
The old --enable-linux-lfs flag has been removed in favor of the
--enable-largefile flag (enabled by default), which can be used on all
platforms.
On systems where large files cannot be supported in this manner,
configure will report as such.
Tested:
h5committest
AIX (NCSA's blue_print machine)
duty, liberty, and linew.
Autotool Upgrade / Libtool Bug Fix
Description:
Updated autotools referenced in bin/reconfigure as follows:
Autoconf 2.64 --> Autoconf 2.65
Automake 1.11 --> Automake 1.11.1
Libtool 2.2.6a --> Libtool 2.2.6b-mcg
The referenced libtool version is a custom version of 2.2.6b. It
has been tweaked to fix a bug in libtool that occurs
when using PGI 10.0 compilers. A check incorrectly categorizes
the C++ compiler as version 1.0 instead of 10.0, and the link
line is subsequently set up incorrectly and fails to compile.
A patch has been made available and will be included in the next
release of libtool, but in the meantime I've applied the patch to a custom
installation as indicated above. This bin/reconfigure now references
the custom installation, and the resulting configure script will correctly
categorize the PGI 10.0 C++ compiler.
Ran bin/reconfigure to regenerate configure and makefiles.
Tested:
jam and amani with PGI 10.0 compilers.
h5committest
Bring revisions from Coverity fixing branch to trunk:
r18184:
Fixed Coverity issue 373. Allocated memory freed in line 762 in case of error.
r18185:
Fixed Coverity issues 357 & 358. Added check for NULL pointer before use.
r18186:
Fix coverity item 65. Added code to h5unjam to correctly handle failures in
read() and write, and also to correctly handle writes that write less than
requested.
r18187:
Fix coverity items 115 and 116. Added code to H5Tenum.c to correctly close
opened datatypes in case of failure.
r18188:
Fixed Coverity issue 46. Check that dataset->shared is not null when freeing
memory after error.
r18190:
Fix coverity item 95. Added code to H5T_create_vlen to correctly close
allocated datatype in case of failure.
r18191:
Fixed Coverity error 59. Checked sfirst for -1 value before use in line 10533.
r18192:
Fix Coverity items 121 and 28
Added Asserts:
121: assert that all dimensions of count have values greater than zero.
28: assert curr_span pointer is not null before dereference.
Note: still need too add checks in hyperslab APIs that fail
when count values are zero, and appropriate tests.
r18194:
Fixed Coverity issues 61 & 62. Checked variable snpoints for value < 0 in line
218.
Tested on:
Mac OS X/32 10.6.2 (amazon) w/debug & production
(already daily tested on coverity branch)
Bring back changes from Coverity session on 1/15/10:
r18111:
Fix Coverity issue #130: make certain that the cache gets freed on error.
r18112:
Fix Coverity issue #43 by making cache testing calls protected by 'pass'
variable.
r18113:
Fix Coverity issue #129 by releasing the cache on error.
r18115:
Coverity #45 fix: patched an error check in H5Screate_simple to prevent future dereferencing of a NULL point.
Added a verification in test/th5s.c.
r18116:
Fix Coverity issue #43 by releasing cache on error.
r18117:
Coverity #362,363 by adding HGOTO_DONE, freeing allocations and associated changes. REsolving coverity results #364-368, 369, 370-372, 377, 379, and 380.
r18118:
Fix Coverity issue #42: assert that cache & test specification pointer are
valid.
r18122:
Coverity #362,363 by adding HGOTO_DONE and freeing allocations. This also takes care of #357,358.
r18123:
Coverity #359-361, 373-376: Added HGOTO_DONE(FAIL) statement after checking allocation for NULL. Verified allocation is freed in done block.
r18128:
Fixed coverity issue #10 -- removed dead code.
Tested on:
Mac OS X/32 10.6.2 (amazon)
The mixed use of RUNTEST (original) and RUNTESTS (new) caused
confusion. E.g., the timings in test/ was still using the old
$RUNTEST. It made more sense to use $RUNTEST which is used
by the dejagnu feature of automake. So, I changed all
$RUNTEST or $RUNTESTS to $RUNEXEC.
config/commence.am & config/conclude.am are the two files
that got changes. Also fixed an error in test/Makefile.am.
The rest are changed by bin/reconfigure.
Tested: h5committested.
CFLAGS overhaul
Description:
Modified the way configure handles CFLAGS.
(note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS).
1. The configure process will now always preserve a user's CFLAGS
environment variable setup. Any additional flags necessary for compilation
added at configure time will be passed into the Makefiles as AM_CFLAGS,
which is an automake construct to be used in addition to CFLAGS.
This will allow a user to have the final say, as CFLAGS will always appear
later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS
during make will no longer completely erase all flags set by configure,
since they're maintained in AM_CFLAGS.
2. Additionally, where possible, flags previously being assigned directly
into CFLAGS (and thus propagating into h5cc) have now been redirected into
H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into
the h5cc wrapper script as well.
*Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the
Makefiles. Complete description of changes and build process will be
included in a Configure Document that Elena and I are working on.
3. Removed unsupported config files. This includes:
config/dec-osf*
config/hpux11.00
config/irix5.x
config/powerpc-ibm-aix4.x
config/rs6000-ibm-aix5.x
config/unicos*
4. Modified configure summary to display additional values. Specifically,
appropriate AM_* variables are being shown, as well as H5_FCFLAGS and
H5_CXXFLAGS, which were for some reason not already present.
Tested:
- H5committest
- Tested on all THG / NCSA machines, using several combinations of the more
prominent configure options (c++, fortran, szip, threadsafe, parallel,
et cetera). (Thanks to Quincey for rysnc testing setup!)
- With regards to new automated testing, anything *necessary* for
compilation will be caught by the daily tests as it stands now. (i.e.,
if LDFLAGS is not properly set when szip is used, linking will fail).
Additionally, with regards to which flags get into h5cc, if any
*necessary* flags have been improperly removed, then daily tests should
fail during make installcheck. Additional machine-specific desired
behaviors and/or checks may have to be set up separately within the
daily tests, so this is something to work on.
Updating autotools
Description:
Installed new autotools and used them to reconfigure HDF5.
- Automake upgraded to 1.11
- Autoconf upgraded to 2.64
- bin/reconfigure script edited to use new versions (on jam), and
run to generate new configure script and Makefile.in's.
- configure.in script edited to add "_cv_" to all AC_CACHE_VAL strings
(in order to comply with new autoconf standard).
Tested:
Tested on machines jam, smirom, liberty, linew.
Tested w/ features c++, fortran, parallel.
Tested w/ compilers gcc, pgcc, icc.
Further testing via Daily Tests should catch any other outliers. Upon
passing DT's, I'll propogate the new tools into 1.8, hdf4, et cetera.
ISSUE: h5ltread_dataset_string_f causes library assertion with g95.
SOLUTION: convert the fortran string buffer to a C buffer with HD5f2cstring, and pass this string to the C function
TEST: added a test call in the fortran test lite program
DOCS: added the note in RELEASE.txt "- Lite: the h5ltread_dataset_string_f and h5ltget_attribute_string_f functions had memory problems with the g95 fortran compiler. (PVN - 5/13/2009) 1522
- Updated bin/reconfigure to use latest version of automake (1.10.2).
Re-generated Makefile.in's by running bin/reconfigure.
- Added libtool version numbers to c++, fortran, hl, hl c++, and hl fortran
libraries.
Tested:
jam, liberty, smirom
Bug Fix
Description:
Fixing BZ #1381. The --includedir=DIR configure option, which is used
to specify the installation location of C header files, did not work
correctly as the path was hard-coded in config/commence.am. I'm presuming
this is because an older version of automake didn't know where to put
c header files. In any case, removing this line now defaults the includedir
to the same directory that it is currently hard-coded to, and also fixes
the configure flag to allow customization of this value.
Tested:
jam, liberty
the way h5ls prints types, it starts searching for NATIVE types first. One solution would be h5ls not to detect these native types, using for example the same print datatype function that h5dump does, that would make the output look the same on all platforms ("32-bit little-endian integer" would be printed instead). Drawback, this "native" information would not be available. Other solution is to have not one but 2 expected outputs and make the shell script detect the endianess and compare with one output or other
tested: h5committest
Description:
- Remove need to set LD_LIBRARY_PATH when using shared szip library.
- Libtool 2.2.6a is now used to generate libraries.
- 'make check install' dependency bug is fixed, and should no longer
break the build.
- removed hard coding of shell in config/commence.am, as this causes
problems on Solaris with the new version of libtool.
- RELEASE.txt with appropriate changes.
Tested:
- kagiso, smirom, linew (merged from 1.8, pretty quick tests)
The custom rules for installing h5cc, h5fc, and the fortran modules in fortran
and in hl/fortran don't use $(DESTDIR). Added it to all those rules.
Tested: kagiso both serial and parallel with fortran and cxx enabled.
Tested by:
make install
make DESTDIR=/tmp/acheng install
diff -r /tmp/acheng/.../hdf5 hdf5
Remove trailing whitespace from C/C++ source files, with the following
script:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Tested on:
Mac OS X/32 10.5.5 (amazon)
No need for h5committest, just whitespace changes...
Description:
The fortran Makefile.am used HDF_FORTRAN to indicate it is part of the
Fortran API source so that conclude.am will give fortran api prefix in the
test output. The symbox HDF_FORTRAN is also used in configure for a different
purpose (indicated --enable-fortran). They conflicted.
Similar problem for the symbol HDF_CXX.
Solution:
Changed all the involved Makefile.am to use "FORTRAN_API" instead. It is
a more appropriate name. Same for CXX_API.
Along the way, discovered that the Makefile.am of hl/fortran/test and
hl/cxx/test did not have those symbols at all. Added them in.
Platform tested:
Kagiso only. It is a trivia change.
Improvement.
Description:
src/libhdf5.settings was the initial configure summary and is installed.
Then configure is changed to dump a summary of the configure settings to
the output and also append it to src/libhdf5.settings. That created
two different output formats and duplicated information. This is the
initial attempt to clean up this confusion and unify the output format.
It is decided to use the src/libhdf5.settings template as the unified means.
This requires more macros symbols be defined. The following symbols are
all related to generating the src/libhdf5.settings file.
AC_SUBST(EXTERNAL_FILTERS)
AC_SUBST(MPE) MPE=no
AC_SUBST(STATIC_EXEC) STATIC_EXEC=no
AC_SUBST(HDF_FORTRAN) HDF_FORTRAN=no
AC_SUBST(FC) HDF_FORTRAN=no
AC_SUBST(HDF_CXX) HDF_CXX=no
AC_SUBST(CXX) HDF_CXX=no
AC_SUBST(HDF5_HL) HDF5_HL=yes
AC_SUBST(GPFS) GPFS=no
AC_SUBST(LINUX_LFS) LINUX_LFS=no
AC_SUBST(INSTRUMENT) INSTRUMENT=no
AC_SUBST(CODESTACK) CODESTACK=no
AC_SUBST(HAVE_DMALLOC) HAVE_DMALLOC=no
AC_SUBST(DIRECT_VFD) DIRECT_VFD=no
AC_SUBST(THREADSAFE) THREADSAFE=no
AC_SUBST(STATIC_SHARED)
AC_SUBST(enable_shared)
AC_SUBST(enable_static)
AC_SUBST(UNAME_INFO) UNAME_INFO=`uname -a`
The src/libhdf5.settings.in has CONDITIONAL's added to it too. The
untrue conditions turned into a "#" and these lines are cleaned by the
post processing script.
Platform tested:
h5committest on kagiso, smirom and linew.
Description: Applying update to autotools that was applied to 1.8 a couple
of weeks ago to the trunk.
Updated bin/reconfigure script to reflect the new versions of
libtool and automake in the /home1/packages/ directory.
Rearranged configure.in script. When using libtool 2.2.2, the
libtool script doesn't generate until later in the configuration
process, so I had to move a test that parsed through the libtool
script to a point after where it was actually being generated.
Ran libtoolize on the project, and ran bin/reconfigure to
regenerate configure and Makefile.in's throughout.
Tested: kagiso, smirom, linew (h5committest)
