Feature
Description:
Added a feature such that if the test name starts with '-', do not run it
by default.
Platforms tested:
Eirene both serial and parallel.
Misc. update:
Code cleanup
Description:
Fix another batch of minor differences between the development and release
branches.
Platforms tested:
FreeBSD 4.10 (sleipnir) w/parallel
Too minor to require h5committest
Code cleanup
Description:
Clean up collective chunking code a bit.
Also, add '--enable-instrument' configure flag to have a mechanism for
determining that optimized operations happened correctly in the library (instead
of just the "normal" way) by allowing 'flag' properties to be set outside the
library and set when the "right" thing happens. This is mainly for debugging
and regression checks, so we make certain we don't break optimized I/O by
accident. It's enabled by default when --enable-debug is on (which is on by
default in the development branch and off by default in the release branch),
but can also be independently controlled with its own configure flag.
Platforms tested:
FreeBSD 4.10 (sleipnir) w/parallel
IBM p690 (copper) w/parallel
To test collective chunk IO properly.
Description:
See the previous message.
Solution:
See the previous message.
Platforms tested:
arabica(Sol 2.7), eirene(Linux), copper(AIX)
Misc. update:
To add collective chunk IO tests.
Description:
three tests are added.
1. Only one hyperslab for each process, and this hyperslab is fit in exactly one chunk.
2. non-contiguous hyperslabs in each process, these hyperslabs are fit in one chunk.
3. Single hyperslab for each process, smaller chunk is assigned. Number of chunks for
every process is equal.
Solution:
the dataset size is set to be very small, will enlarge later.
Platforms tested:
AIX 5.1(copper)
Misc. update:
Bug fix
Description:
Fix error in chunked dataset I/O where data written out wasn't read
correctly from a chunked, extendible dataset after the dataset was extended.
Also, fix parallel I/O tests to gather error results from all processes,
in order to detect errors that only occur on one process.
Solution:
Bypass chunk cache for reads as well as writes, if parallel I/O driver is
used and file is opened for writing.
Platforms tested:
FreeBSD 4.10 (sleipnir) w/parallel
Too minor to require h5committest
Improvement
Description:
The MPI atomicity and file_sync tests may hang if a filesystem
is not able to support the operation. This will block the
whole tests. PHDF5 is not using either features. So, removed
them from the default tests.
Platforms tested:
Only in eirene using pp. Copper is still down.
Bug fix.
Description:
The data verification code didn't work. Also numerous minor bugs.
Solution:
Re-wrote data write and verification code. In particular, I
modified the verification code so it actually verifies data.
In the future, this test should be modified so it exercises
object deletes and chunk I/O.
Platforms tested:
h5committested
Code cleanup
Description:
Clean up lots of warnings based on those reported from the SGI compilers
as well as gcc.
Platforms tested:
SGI O3900, IRIX64 6.5 (Cheryl's SGI machine)
FreeBSD 4.9 (sleipnir) w/ & w/o parallel
h5committest
feature
Description:
Change testphdf5 to use the common test program syntax.
Needed to change the protocols of all test programs to
fit the requirement of the common test syntax.
Platforms tested:
"h5committested".
Also tested in sol with PP mode.
Bug fix
Description:
make check without doing make first would fail to build testphdf5.
Solution:
Put the testphdf5 back in the target of TEST_PROG_PP and removed
the "testphdf" without any parameter from testph5.sh.
Platforms tested:
copper parallel. This is not relevant to non-parallel cases.
Misc. update:
Improvement
Description:
Changed parsing of verbose level by the common test library routine.
Change t_mpi.c to use the Verbose control better.
Platforms tested:
verena (pp).
Misc. update:
Improvement.
Description:
Complete change of the verbose control to use the routines provided by
the test/libh5test.a.
Also put in a temporary fix for the H5Eset_auto() and H5Eget_auto()
so that the Compat code are isolated in one place rather than all over
the source file.
Platforms tested:
Tested in Eirene (parallel).
Misc. update:
Added a test of fill value before any data is written to a dataset.
Rename short_dataset() as dataset_fillvalue() as it reflects better
the tests. Also removed the option of -S since the fill value test
will be tested always.
Platforms tested:
"h5committested"
Misc. update:
Code cleanup.
Description:
The H5Eclear() in the VRFY and INFO macros are not needed.
After removing them, there is no need to have a separate
v1.6 Compat version.
Platforms tested:
"h5committested"
Misc. update:
Code cleanup, bug fixes
Description:
Wrap up rest of changes necessary for fixing the "short" MPI-I/O read
problem that Robb reported.
Platforms tested:
FreeBSD 4.9 (sleipnir)
too minor to require h5committest
Feature.
Description:
Added the short_dataset test (was in v1.6 first.)
Platforms tested:
Tested in eirene (pp) only since these have been tested in v1.6 already.
Misc. update:
Bug fix
Description:
Clean up a couple more 1.6 compat bugs that showed up when the library
was compiled with parallel support.
Platforms tested:
FreeBSD 4.9 (sleipnir) w/parallel & 1.6 compat
config not tested with h5committest
Update
Description:
This completes Phase I of the FPHDF5 testing. This test does the
following:
- Creates a file
- Creates multiple non-root groups
- For each process:
For each non-root group:
Create multiple datasets
Access all datasets created above
Write to all datasets created above
- Close the file
- Reopen the file and verify the data is correct
Platforms tested:
AIX (w/ FPHDF5)
Linux (w/ FPHDF5)
Solaris (w/ Fortran & C++)
Misc. update:
new feature.
Description:
Added tests of 1wMr with options to apply Atomicity or File_sync.
Platforms tested:
only tested in eirene and Teragrid as this is just an MPI test.
Misc. update:
Update
Description:
Extensive reworking of the code. More modular now. Tests for almost
all of "Phase 1"s requirements. Need to check that data is correct
after reopening the file.
Platforms tested:
Linux (w/ FPHDF5)
AIX (w/ and w/o FPHDF5)
FPHDF5-specific fixes...No need for H5committest
Misc. update:
new test.
Description:
Added test_mpio_1wMr test which verify if the file system can support
1 process writes, many processes read.
Platforms tested:
h5committested.
Misc. update:
Update
Description:
The FPHDF5 test now writes data simultaneously from all processes to
all created datasets. It's wicked cool!
Platforms tested:
Linux (w/ FPHDF5)
Copper (w/ FPHDF5 & w/o Parallel)
FPHDF5-specific, so no h5committest
Misc. update:
Update
Description:
Modified the FPHDF5 test so that a single process creates multiple
datasets in a non-root group then all of the processes (sans the SAP)
access it.
Modularized the code a bit more to make it easy to perform the above
tests.
Changed the code a bit so that >3 processes can (theoretically) be
used to test this.
Platforms tested:
Linux (FPHDF5 specific change)
Misc. update:
Update
Description:
Expanded the FPHDF5 test to include creating multiple datasets by one
process in a non-root group.
Cleaned up the code a bit more to make it more modular and easier to
work with.
Platforms tested:
Linux (FPHDF5 specific)
Misc. update:
Update
Description:
Added test for FPHDF5 to the testpar/ directory. If you specify
--enable-fphdf5 during configuration, it'll run this test during a
"make check".
Platforms tested:
Linux (FPHDF5 specific).
Misc. update:
Feature, sort of.
Description:
Reactivated the big dataset test. Changed it
to default off, can be turned on via -b.
Platforms tested:
Only in Copper which is the only local machine safe to run
mulitple GB size files.
Misc. update:
Bug/feature fix.
Description:
Relax restriction on parallel writing to compact datasets to allow partial
I/O.
Updates to reference manual mentioning the issues involved are delayed until
reference manual 'lock' is removed later this week.
Platforms tested:
FreeBSD 4.9 (sleipnir)
too minor to require h5committest
Disable "big" parallel tests until I get a chance to look into the
problems (probably during/after the workshop).
Platforms tested:
Eyeballed
Too minor to require h5committest
Bug fix
Description:
The MPI_File_set_size() routine on ASCI Red is not able to extend files
so that they are larger than 2GB.
Solution:
Add an extra macro which controls whether MPI_File_set_size() can handle
>2GB offsets or if our "older" way of reading a byte, then writing a byte at
the appropriate offset should be used.
Platforms tested:
FreeBSD 4.9 (sleipnir)
h5committest
Bug fix
Description:
Temporary files were not cleaned out because the definiton of
temporary files had not been updated.
Solution:
Updated it.
Platforms tested:
Tested by hand in Copper while i was testing the MPE change.
Misc. update:
Updated the copyright notice--mostly by rearranging
some text to make them consistent.
Solution:
Platforms tested:
"h5committested"--sol is down, so, no SUn test.
Misc. update:
Compatibility fix
Description:
The H5P[set|get]_fapl_mpiposix calls changed between v1.4.x and v1.5.x.
Solution:
Wrap them in the v1.4 backward compatibility #ifdefs and update tests, etc.
Platforms tested:
FreeBSD 4.8 (sleipnir) w/paralle & v1.4 compatibility
h5committest pointless
Bug fix
Description:
An earlier checkin changed some of the assumptions about single block
hyperslabs, causing them to fail in odd ways.
Solution:
Fix errors with single block hyperslabs by keying off of count==1 instead
of stride==1.
Platforms tested:
FreeBSD 4.8 (sleipnir) w/parallel
h5committested
Add printout to identify when the MPIPOSIX driver is being tested instead
of the MPI-IO driver..
Platforms tested:
Tested in copper in parallel mode only since it was just a simple
print statement in the parallel test code.
Misc. update:
Feature Add
Description:
Added knob so that the programmer can enable or disable GPFS
hints during runtime instead of having it only enabled at
configure/compile time. Some of the public APIs were changed
to add an extra parameter for this option...
Platforms tested:
Blue (LLNL). It only affects the MPI/POSIX driver, so no need
to test it on non-GPFS platforms.
Misc. update:
feature
Description:
added test_fapl_mpiposix_dup to verify the MPIPOSIX is making
duplicates of Communicator correctly.
Platforms tested:
Did not h5committested because these are all MPI code and well protected
by HAVE_PARALLEL.
Tested in eirene and modi4, both parallel mode.
Misc. update:
code cleanup.
Description:
Rename test_comm_info_delete to test_fapl_mpio_dup to better decribe
what it does. Updated the comments to describe more accurate.
Platforms tested:
Did not run h5commmittest since the changes were all in parallel area.
Ran parallel tests on modi4 and eirene.
Misc. update:
simple code cleanup.
Description:
While debug a problem in multiple_group_write(), noticed some returned
values were not checked. Added code to check on all returned code.
Platforms tested:
h5committested.
Misc. update:
