----------------------
./MANIFEST
./src/H5FDmulti.c [NEW]
./src/H5FDmulti.h [NEW]
./src/Makefile.in
./src/hdf5.h
The split driver was reimplemented as a more general "multi"
driver which is capable of splitting data into multiple files
like the family driver except the partioning is done by memory
usage type instead of address. The H5Pset_fapl_split()
function just calls H5Pset_fapl_multi() with arguments which
prepare to split the address space into two files: meta and
raw data.
This is the first version. I plan to allow the open() call to
relax a bit which would allow one to open an hdf5 file when
only the meta-data file is present. This would allow a very
large file to be split and stored on tape and the relatively
small meta file to be mirrored on disk to allow limited
browsing of the file (any request for raw data would fail).
./src/H5private.h
./src/H5F.c
./src/H5FD.c
./src/H5FDprivate.h
./src/H5FDpublic.h
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDmpio.c
./src/H5FDsec2.c
Added the ability for a file driver to store information in
the superblock which would be needed if the file were opened
again later for reading. The format is driver-defined which
allows users to extend it however they like.
./doc/html/H5.format.html
Added information about the new driver information block of
the superblock. This is where file drivers store information
they need in order to reopen the file later.
./src/H5F.c
./src/H5Fprivate.h
./src/H5FD.c
./src/H5FDprivate.h
./src/H5FDpublic.h
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5Fistore.c
./src/H5R.c
The file access properties and the file access property list
were decoupled, which allows the property list to more cleanly
contain properties for various levels of the file and which
allows the property list to be modified more cleanly when
opening files.
./src/H5.c
./src/H5FDpublic.h
Removed H5FD_MEM_META and H5FD_MEM_GROUP since they're never
used.
./src/H5D.c
Changed the way we detect the MPIO driver in all these special
cases.
./src/H5F.c
./src/H5Rpublic.h
./test/tfile.c
The default file sizeof(offset) was changed to be a function
of haddr_t instead of hsize_t.
THE H5RPUBLIC.H DEFINITIONS WILL HAVE PROBLEMS IF THE USER
CREATES A FILE WITH NON-DEFAULT OFFSET AND SIZE SIZES!
./src/H5F.c
Fixed an uninitialized memory access bug in file closing
related to the VFL.
./src/H5T.c
./src/H5Tpublic.h
Added an H5T_NATIVE_HADDR predefined datatype which
corresponds to the `haddr_t' type.
./test/Makefile.in
Reformatted long lines.
./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
Removed the H5F_ACC_DEBUG flag from file creation/open calls.
./test/big.c
Plugged a memory leak.
./test/h5test.c
Added support for the `multi' driver.
Removed #warning about not having the stdio driver. Plans are
to not implement it since the sec2 driver serves the same
purpose and testing didn't show any difference in execution
times between the two.
----------------------
This extensive change is the virtual file layer implementation. I've
ported and tested the sec2, family, and core drivers and only ported
the mpio driver (Albert will test it). So if you need MPIO I would
recommend sticking with the previous version for a while.
You will get a few compile warnings about split and stdio drivers not
being implemented and possibly tracing information not inserted in
some of the drivers. You can safely ignore them but I plan to fix
them.
I'm still working on the split driver because I just realized that it
needs a part of the VFL that isn't written yet.
Documentation is being updated also because there were some minor
changes (mostly just name changes). It should be available on my web
site later this week.
./MANIFEST
./src/Makefile.in
./src/hdf5.h
./src/H5Flow.c [REMOVED]
./src/H5Fstdio.c [REMOVED]
./src/H5Fsec2.c [REMOVED]
./src/H5Fsplit.c [REMOVED]
./src/H5Fmpio.c [REMOVED]
./src/H5Ffamily.c [REMOVED]
./src/H5Fcore.c [REMOVED]
./src/H5MFpublic.h [REMOVED]
./src/H5FD.c [NEW]
./src/H5FDcore.c [NEW]
./src/H5FDcore.h [NEW]
./src/H5FDfamily.c [NEW]
./src/H5FDfamily.h [NEW]
./src/H5FDmpio.c [NEW]
./src/H5FDmpio.h [NEW]
./src/H5FDprivate.h [NEW]
./src/H5FDpublic.h [NEW]
./src/H5FDsec2.c [NEW]
./src/H5FDsec2.h [NEW]
Removed/added files for virtual file layer.
./bin/trace
./src/H5.c
Removed unused public datatypes and added new VFL public
datatypes.
Changed an error message.
./config/BlankForm
./config/dec-flags
./config/gnu-flags
./config/hpux10.20
./config/hpux9.03
./config/irix5.x
./config/irix6.x
./config/solaris2.x
./config/unicosmk
Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the
configuration since they're no longer applicable. The default
file driver is always the sec2 driver and it always optimizes
calls to lseek() or lseek64().
./config/depend.in
C preprocessor errors generated during automatic dependency
building are sent to /dev/null to prevent them from appearing
twice in the make output.
./src/H5AC.c
./src/H5B.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Oshared.c
./src/H5T.c
./src/H5detect.c
./test/ohdr.c
Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent
with the `haddr_t' datatype which is now a public type.
./src/H5D.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5Tconv.c
./test/cmpd_dset.c
./test/dsets.c
./test/overhead.c
./test/tselect.c
./test/tvltypes.c
The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER
because the properties apply to all types of I/O operations,
not just datasets.
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5R.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Spoint.c
./src/H5Sprivate.h
./test/big.c
./test/h5test.c
./test/istore.c
./testpar/t_dset.c
./testpar/t_file.c
./tools/h5debug.c
./tools/h5ls.c
Modified to work with the virtual file layer by calling H5FD_*
functions instead of H5F_low_* functions and by passing file
access and data transfer properties by object ID instead of
pointer.
Changed H5D_transfer_t to H5FD_mpio_xfer_t since the
COLLECTIVE vs. INDEPENDENT transfer mode is specific to the
MPIO file driver.
Moved MPIO-specific stuff into the MPIO driver.
./src/H5B.c
./src/H5D.c
./src/H5Fprivate.h
The H5F_mpio_* private functions were renamed and placed in
the H5FDmpio driver except those which appeared in H5Smpio.c.
./src/H5E.c
./src/H5Epublic.h
Added major error number H5E_VFL for virtual file layer
related errors.
./src/H5F.c
./src/H5Fprivate.h
Changed the logic that controls whether the boot block is
written. Instead of assuming that the first call to write the
boot block is only to allocate space, I've added a function
argument which makes this explicit.
Changed the way files are compared so that a driver-defined
comparison function can be called. Files which belong to
different drivers are always considered different.
Removed H5F_driver_t since file drivers are now identified by
object ID instead of a special non-user-extendible datatype.
Removed all the hard-coded low-level file properties which
have been replaced by the various file drivers.
./src/H5I.c
./src/H5Iprivate.h
Added the H5I_inc_ref() which was removed a few months ago
since we finally have a use for it.
./src/H5Ipublic.h
Added the H5I_VFL object ID type to identify file drivers in
the virtual file layer.
./src/H5MF.c
./src/H5MFprivate.h
Moved all the allocation/deallocation code into the virtual
file layer which allows file drivers to override much of it.
./src/H5P.c
./src/H5Ppublic.h
Moved file driver-specific code into the various file driver
files.
The H5Pcopy() and H5Pclose() functions make calls into the
virtual file driver to manage the memory for driver-specific
file access and data transfer properties.
./src/H5private.h
./src/H5public.h
The `haddr_t' type is now public.
./test/tfile.c
Added a few more comments.
Changes since 19990618
----------------------
./configure.in
./configure [REGENERATED]
Now that compound struct conversions don't make so many calls
to convert their members I turned the H5T debugging back on by
default (it will still be disabled in a production version).
./src/H5AC.c
./src/H5B.c
Made it possible to turn off messages about debugging these
two packages using the same method as for all other
packages. Just supply an invalid file descriptor number or use
the shell to redirect said descriptor to /dev/null like this:
$ HDF5_DEBUG=99,ac,b 99>/dev/null a.out
./src/H5T.c
Changed the name of the old compound conversion function from
`struct' to `struct(no-opt)' to be more consistent with the
new version named `struct(opt)'.
Fixed a bug in H5T_cmp() that caused any two VL types to
compare as being equal.
Removed duplicate code for bitfield comparisons in H5T_cmp().
./src/H5Tconv.c
Relaxed some constraints in the new compound conversion
function so it applies to more cases. Also eliminated a
memcpy in a tight loop.
./test/cmpd_dset.c
Added a `--noopt' command line switch which unregisters the
optimized compound conversion so we can test the non-optimized
version.
----------------------
./config/irix64
The old (-32) compiler is now supported by setting envrionment
CC='cc -32'. The -64 compiler is the default or you can set
CC='cc -64'.
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5G.c
./src/H5I.c
./src/H5Ocomp.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5T.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5Z.c
./src/H5detect.c
./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/enum.c
./test/mtime.c
./test/ohdr.c
./tools/h5ls.c
Fixed lots of warnings on Irix64. Mailed a few remaining
warnings in H5S to Quincey and a few in the dumper to
Ruey-Hsia.
----------------------
./src/H5.c
./src/H5A.c
./src/H5AC.c
./src/H5B.c
./src/H5D.c
./src/H5E.c
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gstab.c
./src/H5HG.c
./src/H5HL.c
./src/H5I.c
./src/H5Iprivate.h
./src/H5MF.c
./src/H5MM.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5Sselect.c
./src/H5T.c
./src/H5TB.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5V.c
./src/H5Z.c
./src/H5detect.c
./src/H5private.h
Most of these changes are because the `interface_initialize_g'
variable change from hbool_t to int. It's a one line change.
Changed the way the library is closed so we have more control
over the order the interfaces are shut down. Instead of
registering an atexit() function for every interface in some
haphazard order we just register one: H5_term_library() which
then calls the H5*_term_interface() functions in a
well-defined order.
If the library is closed and then reopened repeatedly by
calling H5close() and H5open() in a loop we only add one copy
of the library termination functions with atexit().
Termination is a two-step process in order to help detect
programming errors that would cause an infinite loop caused by
the termination of one interface waking up some other
previously terminated interface. The first step terminates
the interface and *marks it as unusable*. After all
interfaces are terminated then we mark them all as usable
again. The FUNC_ENTER() macro has been modified to return
failure or to dump core (depending on whether NDEBUG is
defined) if we try to call an interface while it's shutting
down.
./src/H5.c
The H5dont_atexit() function returns failure if it's called
more than once or if it's called too late. However, the error
stack is not automatically printed on failure because the
library might not be initialized yet
./test/chunk.c
./test/flush1.c
./test/flush2.c
./test/iopipe.c
./test/overhead.c
./test/ragged.c
Changed the extra cast for Win32 so we do floating point
division again -- it was just confusion about precedence and
associativity of casting and the C coercion rules. Removed
extra carriage returns inserted by broken operating system.
./src/H5Ffamily.c
Fixed an bug where H5F_fam_write() lowered the EOF marker for
one of the family members causing H5F_fam_read() to read
zeros.
./test/h5test.h [NEW]
./test/h5test.c [NEW]
./test/Makefile.in
./test/bittests.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
Support library for test files. This isn't done yet but
Katie's contractions are ~10 minutes apart so I figured I
better back this stuff up just in case I'm not here next
week...
Eventually all test files will understand HDF5_DRIVER to name
the low level file driver and parameters so we can easily test
various drivers. They will also understand HDF5_PREFIX to
prepend to the beginning of file names which is necessary for
testing ROMIO with various drivers. Also, the cleanup function
will know how to use the file name prefix and will understand
different file driver naming schemes like file families. I'm
not sure they'll understand the `gsf:' type prefixes yet.
Note, the external test is completely commented out because
I'm in the middle of modifying it. It will still compile and
run but it doesn't test anything at the moment.
----------------------
./test/flush2.c
./test/overhead.c
Removed carriage-returns inserted by a broken operating system.
./test/big.c
./test/mtime.c
./test/ragged.c
./tools/h5ls.c
Removed inclusion of <H5config.h>, system header files, and definition
of __unused__ since this all happens in <H5private.h>.
./test/chunk.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
./test/fillval.c
./test/flush1.c
./test/flush2.c
./test/iopipe.c
./test/links.c
./test/mount.c
./test/overhead.c
./test/shtype.c
./test/unlink.c
./tools/h5import.c
./tools/h5repart.c
Removed inclusion of <H5config.h> since <hdf5.h> includes it.
./test/flush1.c
Includes <stdlib.h>, protects inclusion of <unistd.h> by using
HAVE_UNISTD_H instead of STDC_HEADERS.
----------------------
./MANIFEST
Added new Pablo files HDF5record_RT.h and ProcIDs.h
./acconfig.h
./configure [REGENERATED]
./configure.in
./src/H5.c
./src/H5Vprivate.h
./src/H5config.h.in [REGENERATED]
./src/H5private.h
./src/H5public.h
./test/big.c
Added more configuration stuff for the Win32 environment. Removed all
the #ifdef WIN32 from the source and replaced them with OS-independent
stuff. Specifics follow:
Check for non-Posix.1 `st_blocks' field in `struct stat' which is used
by the big file test to decide if the file system supports holes. If
the st_blocks field isn't present then we just skip the test.
Configure checks for <io.h> <sys/resource.h> <sys/time.h> and
<winsock.h> and defines HAVE_IO_H, HAVE_SYS_RESOURCE_H,
HAVE_SYS_TIME_H and HAVE_WINSOCK_H when they're found.
Configure checks whether both <sys/time.h> and <time.h> can be
included and defines SYS_TIME_WITH_TIME if so. Otherwise include only
<sys/time.h> or <time.h> even if both exist.
Configure checks sizeof(__int64) and defines SIZEOF___INT64 to the
result or to zero if __int64 isn't defined. The source uses `long
long' in preference to `__int64'.
Removed null WIN32 definition for `inline' since such a definition
already exists in H5config.h
Protected gettimeofday() calls in debugging code with
HAVE_GETTIMEOFDAY instead of WIN32.
./src/H5F.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fstdio.h
./src/H5P.c
./src/H5Tconv.c
./src/H5private.h
Removed #include of system files from library source files and
consolodated them into H5private.h where they're protected by various
configuration macros (most of them were duplicated there already
anyway).
./test/big.c
./test/chunk.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
./test/fillval.c
./test/flush1.c
./test/flush2.c
./test/iopipe.c
./test/links.c
./test/mount.c
./test/mtime.c
./test/overhead.c
./test/ragged.c
./test/shtype.c
./test/unlink.c
Protected system #include's with #ifdef's from H5config.h.
Undefined NDEBUG since some of the tests rely on assert() to check
return values.
Removed WIN32 definitions for __unused__ since this can be controlled
by the definition of HAVE_ATTRIBUTE in H5config.h
./test/testhdf5.h
Removed the CLEAN_CMD definition because we no longer use it.
Albert's cleanup() functions replaced it.
./test/fillval.c
Initialized auto hid_t variables to fix warnings in error recovery
code when data flow analysis is turned on in compilers.
./test/h5tools.c
Initialized an auto variable to fix a compiler warning.
./test/chunk.c
./test/ragged.c
The WIN32 had some unsigned variables changed to signed because the
compiler generates warnings when coercing unsigned to double(?). I
changed them back to unsigned because they really are unsigned
quantities. If this the change was just to shut up extraneous warnings
then perhaps a compiler flag can do the same; otherwise if the
compiler generates bad code then we should supply a patch file instead
messing up source code with bug work-arounds.
./src/H5detect.c
Protected system #include's with #ifdef's from H5config.h thereby
removing a WIN32.
If getpwuid() doesn't exist (HAVE_GETPWUID) then we assume that
`struct passwd' doesn't exist either (we don't really need it in that
case).
The H5T_NATIVE_LLONG and H5T_NATIVE_ULLONG are defined in terms of
`long long' or else `__int64' or else `long' depending on what's
available.
./src/H5Flow.c
./src/H5Ofill.c
Added __unused__ to some function arguments that aren't used when
assertions are turned off.
./src/H5V.c
Changed an auto variable name in some hand-inlined code to get rid of
a warning about the variable shadowing a previous auto.
----------------------
./bin/trace
./src/H5.c
./src/H5F.c
./src/H5Fprivate.h
./src/H5Fpublic.h
Added a `scope' argument to H5Fflush() which should be either
H5F_SCOPE_LOCAL or H5F_SCOPE_GLOBAL and determines which files
are flushed (just the specified file or the entire virtual
file).
./src/H5F.c
Added reference counts to the H5F_t struct so we get the
correct behavior between H5Funmount() and H5Fclose().
./src/H5O.c
Fixed a memory leak that happens during error handling.
./test/cmpd_dset.c
./test/unlink.c
Fixed a memory leak.
./test/mount.c
Enabled the H5Fclose() test.
----------------------
./MANIFEST
./src/H5R.c [NEW]
./src/H5Rprivate.h [NEW]
./src/H5Rpublic.h [NEW]
./src/Makefile.in
./src/hdf5.h
./test/ragged.c [NEW]
Preliminary support for 2d ragged arrays for Mark Miller and
Jim Reus. Not fully implemented yet. The test is not actually
part of `make test' because we still have some memory problems.
./src/H5E.c
./src/H5Epublic.h
Added H5E_RAGGED as a major error number.
./bin/release
Checks the MANIFEST file against `svf ls' on systems that have
it.
./bin/trace
Fixed a bug that caused arguments of type `void *x[]' to not
be handled.
./src/H5.c
Removed unused variables and changed a couple types to
fix compiler warnings.
Added tracing support for ragged array object ID's and arrays
of pointers.
./src/H5D.c
H5Dcreate() will complain if either of the property lists are
invalid (instead of using the default).
./src/H5D.c
./src/H5Dprivate.h
Split H5Dget_space() into an API and internal function so it
can be called from the new ragged array layer.
./src/H5Fistore.c
Fixed warnings about unsigned vs. signed comparisons.
./src/H5Flow.c
Fixed a warning about a variable being shadowed in the MPI-IO
stuff.
./src/H5Iprivate.h
./src/H5Ipublic.h
Added the H5_RAGGED atom group.
./src/H5Shyper.c
Fixed some freeing-free-memory errors that resulted when
certain arrays were freed but the pointers were left in the
data structures. I simply set the pointers to null after they
were freed.
./src/H5Sprivate.h
./src/H5Sselect.c
Split the H5Sselect_hyperslab() function into an API and a
private function so it could be called from the ragged array
layer.
Added H5S_SEL_ERROR and H5S_SEL_N to the switch statements to
get rid or compiler warnings.
./src/H5Tconv.c
Removed a misleading comment.
./test/bittests.c
Fixed a warning about a printf().
./test/cmpd_dset.c
Fixed warnings about unused variables because of test #11
being commented out.
./bin/trace
Shortened the right margin for the output to allow room for
the `);' at the end of the TRACE() macros.
----------------------
./MANIFEST
./doc/html/H5.format.html
./src/H5O.c
./src/H5Oprivate.h
./src/H5Omtime.c [NEW]
./src/H5private.h
./src/Makefile.in
Added the modification time message. If an object header has
this message then it's value is updated with the current time
whenever anything changes in the object header.
./acconfig.h
./configure.in
Alas, there seems to be no standard way to convert a string
time like 19980727122800 in UTC to a time_t since mktime()
only converts local times to time_t. So I've modified the
configuration to check for various ways of getting the time
zone information:
* Added checks for the `tm_gmtoff' field of `struct tm'.
* Added a check for the `timezone' global variable.
* Added a check for `struct timezone'.
* Added a check for BSDgettimeofday().
* Added a check for gettimeofday() although it doesn't
actually set the timezone argument on some systems.
* Added a check to see if `tm_zone' is a member of `struct tm'.
* Added a check to see if `tzname' is a global variable.
* Added a check to see if `struct tm' is defined in time.h
or sys/time.h.
It's not difficult to get the right UTC modification message
into the object header, but some systems might have problems
getting the right time back out (Irix64 is one) and those
systems will report zero for the H5G_stat_t.mtime from an
H5Gstat() call as if the mtime message isn't even present. It
will, however, continue to be updated as normal.
./src/H5G.c
./src/H5Gpublic.h
The H5G_stat_t struct now contains an `mtime' field which will
hold the object modification time. If the object has no
object modification time then the `mtime' will be initialized
to zero.
Fixed a bug in H5G_stat() that caused the `objno' field of the
H5G_stat_t to be set incorrectly on some machines.
./src/H5D.c
Writing to external datasets fail if the hdf5 file is not open
for writing.
A modification time message is added to the dataset object
header when it's created and H5O_touch() is called from
H5D_write() to update that message.
./src/H5T.c
Fixed a bug in H5Tget_member_dims() that caused a segmentation
fault if one of the output array arguments was the null
pointer.
Relaxed the member dimension checking in H5Tinsert_array() so
it can also be used for scalar members.
./test/Makefile.in
Added additional file names to the `mostlyclean' target.
./tools/h5dump.c
./tools/h5tools.h
Increased the temporary buffer size to 1MB.
Added support for printing compound data types with array
members.
When printing H5T_NATIVE_CHAR and H5T_NATIVE_UCHAR we escape
double quote characters.
./tools/h5ls.c
Changed the output format a little because we were starting to
get too much info to fit on a line. Without `--verbose' each
object occupies one line of output. Otherwise, additional
information is printed below the object name: object file
address, comment, and modification time. If `--dump' is given
then the data is printed after the other information.
./test/cmpd_dset.c
Changed the way the dataset is initialized to be more uniform.
----------------------
./bin/trace
./src/H5.c
Added tracing support for H5S_seloper_t and H5S_class_t.
./src/H5Sselect.c
./src/H5S.c
Added tracing statements that weren't inserted previously
because of formatting problems.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
./test/cmpd_dset.c
Added H5Tinsert_array() for inserting an array member into a
compound data type. Added support to the struct conversion
function for member arrays. The index permutation is not
supported yet in the conversion (source and destination must
have the same permutations).
----------------------
./html/Datatypes.html
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
./src/H5detect.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/external.c
./test/tattr.c
./test/th5s.c
Organized the predefined data types.
./html/H5.intro.html
NO MODIFICATIONS! This file is a mess (obviously generated
from something else) so I skipped updating it!
./src/h5ls.c
./test/dsets.c
./test/tattr.c
./test/th5s.c
Added extra argument to H5Sget_dims() calls per Albert's last
update.
----------------------
./src/H5A.c
Named data types can have attributes.
Fixed bugs where the API functions didn't check the return
values of their internal counterparts and thus the automatic
error reporting didn't work.
Fixed some places where the error stack wasn't cleared after a
function returned failure.
Data types returned by H5Aget_type() are always read-only.
If the `attr_num' argument of H5Aiterate() is null then it
acts like H5Giterate() instead of failing -- it begins
processing attributes with the first one.
./src/H5D.c
We check for allocation overruns when scalar datasets are
stored in external files.
./src/H5O.c
H5O_modify() will fail if the message is >=16kB.
./src/H5Oattr.c
Split some long lines
./src/H5T.c
./src/H5Tprivate.h
Added H5T_entof() to support attributes on named types.
./src/h5ls.c
Prints the names of attributes and their sizes.
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
./test/gheap.c
./test/istore.c
./test/links.c
./test/shtype.c
If the environment variable HDF5_NOCLEANUP is defined then the
temporary files are not removed. The testhdf5 program still
has the bug that it removes *.h5, clobbering test files from
other programs... oh well.
./test/dtypes.c
Added attribute tests.
----------------------
./html/Datasets.html
Fixed a couple of typos.
./src/H5.c
Added the `Z' modifier to HDfprintf() for `size_t' sizes. Use
it like this:
HDfprintf(stderr,"size is %Zd\n", (size_t)x);
./src/H5AC.c
./src/H5F.c
./src/H5Fprivate.h
The maximum number of meta data objects that can be cached can
be set from the application (but the library might not honor
it every time; it's a hint).
./src/H5D.c
Changed a warning message so it's not so alarming.
./src/H5Fistore.c
Chunks can be cached.
./src/H5O.c
./src/H5Oprivate.h
Added H5O_copy() and H5O_free() to copy and free messages.
./src/H5P.c
./src/H5Ppublic.h
Added H5Pset_cache() and H5Pget_cache() and changed lots of
"template" to "property list".
./src/H5Z.c
./src/H5Zpublic.h
Miscellaneous little things to clean up. Mostly just removed
H5Z_MAXVAL and added H5Z_USERDEF_MIN and H5Z_USERDEF_MAX.
./MANIFEST
./test/Makefile.in
./test/chunk.c [NEW]
Added a performance test for chunk caching. It looks at the
amount of I/O instead of timing because timing is partly
dependent on the chunk size and I wanted a measurement that
was a function of only the cache size. Run `chunk' with no
arguments and then say `gnuplot x-gnuplot' to see the plots
(press return between plots). Postscript files are created for
each plot.
./test/big.c
./test/cmpd_dset.c
./test/extend.c
./test/external.c
./test/gheap.c
Added H5F_ACC_DEBUG so we can see cache performance
statistics.
./src/H5F.c
./src/H5G.c
./src/H5O.c
./src/H5Osdspace.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Z.c
./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/extend.c
./test/istore.c
Now that I have a home-grown version of Purify I fixed all the
leaks in all the test files.
----------------------
./src/H5B.c
./src/H5D.c
./src/H5Dprivate.h
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5S.c
./src/H5Sprivate.h
./src/H5Spublic.h
./src/H5Ssimp.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5V.c
./src/H5Vprivate.h
./src/H5private.h
./src/H5public.h
./src/h5ls.c
./test/cmpd_dset.c
./test/dsets.c
./test/extend.c
./test/external.c
./test/hyperslab.c
./test/iopipe.c
./test/istore.c
./test/shtype.c
./test/tfile.c
./test/th5s.c
Anything having to do with the size of a dataset now uses the
types `hsize_t' and `hssize_t' which must be the same size and
at least as large as `size_t'. This isn't fully tested yet,
so hsize_t and hssize_t are defined as size_t and ssize_t in
H5public.h. Setting them to larger values will trip up gcc
versions less than 2.8.1 on x86 platforms.
Documented unused function formals with `__unused__' before
the formal name. This also has the effect of supressing
warning messages for gcc since it's defined to be
`__attribute__((unused))' in the H5private.h file.
./src/debug.c
./src/h5ls.c
If the file name contains a `%' then the file is opened as a
file family with H5P_DEFAULT for the file member access
property list.
./src/h5ls.c
The group name is optional, defaulting to `/'.
./src/hdf5.h
Added some missing public header files.
----------------------
./configure.in
Moved setting of compiler warning switches earlier in the file.
Turned on more warning switches to gcc.
./config/linux
Prints a warning if the gcc version is less than 2.8.1 since
that version has problems with register allocation for `long
long'.
./html/Datatypes.html
Documented sharing of data types between datasets.
./src/H5G.c
./src/H5Gpublic.h
Implemented H5Gmove(), H5Glink() and H5Gunlink() for hard
links. Still have soft links to do.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5D.c
./src/H5E.c
./src/H5Eprivate.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5HG.c
./src/H5HL.c
./src/H5HLprivate.h
./src/H5I.c
./src/H5Iprivate.h
./src/H5MM.c
./src/H5MMprivate.h
./src/H5O.c
./src/H5Oefl.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5S.c
./src/H5Ssimp.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tprivate.h
./src/H5Tpublic.h
./src/H5V.c
./src/H5Vprivate.h
./src/H5detect.c
./src/h5ls.c
./test/cmpd_dset.c
./test/dsets.c
./test/external.c
./test/hyperslab.c
./test/iopipe.c
./test/istore.c
./test/shtype.c
./test/tstab.c
Fixed comparisons between signed and unsigned values. Fixed
warnings about unused function arguments.
----------------------
./src/H5D.c
./src/H5T.c
./src/H5Tprivate.h
Fixed a bug found by Kevin Powell regarding preservation of
existing data during a read or write when the source and
destination data types are the same. Thanks Kevin!
Fixed a couple warnings on Irix64.
./src/H5D.c
./src/H5Dprivate.h
./src/H5P.c
./src/H5Ppublic.c
./src/H5Tconv.c
./src/H5Tpublic.h
./test/cmpd_dset.c
The application can now turn on/off the part of the I/O
pipeline that deals with preservation of initialized data.
The default is off since this will be the usual case and
turning it on slows down the pipe. Use H5Pset_preserve() and
H5Pget_preserve().
./src/H5Fistore.c
Added an optimization for reading/writing a single chunk of
chunked storage.
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Ostab.c
Fixed warnings reported by marek@iiasa.ac.at. Thanks Marek.
./src/H5Odtype.c
Fixed a failing assert() wrt reading compound types (not
present in hdf5-1.0.0a).
----------------------
./configure.in
./src/H5Fprivate.h
./src/H5Fsec2.c
We now detect and use lseek64() on systems that have it (e.g.,
Irix64) and are able to generate >2GB files on Irix XFS file
systems (and anything else that supports large files). This
change also removed some warning messages from the Irix `-64'
compiler.
> $ ls -l istore.h5
> -rw-r--r-- 1 matzke meshtv 8605436856 Feb 17 14:03 istore.h5
./configure.in
./src/H5Fprivate.h
./src/H5Fstdio.h
We now detect and use fseek64() on systems that have it (e.g.,
Irix64) and are able to generate >2GB files on Irix XFS file
systems (and anything else that supports large files). This
change also removed some warning messages from the Iris `-64'
compiler.
./src/H5E.c
./src/H5Epublic.h
Added the H5E_OVERFLOW error to signal file address overflow.
./src/H5Fpublic.h
./examples/h5_chunk_read.c
./examples/h5_compound.c
./examples/h5_extend_write.c
./examples/h5_group.c
./examples/h5_read.c
./examples/h5_write.c
./html/Datasets.html
./html/Files.html
./html/H5.api.html
./html/H5.intro.html
./html/H5.sample_code.html
./html/ph5example.c
./html/review1.html
./test/cmpd_dset.c
./test/dsets.c
./test/extend.c
./test/tfile.c
./test/th5p.c
./test/theap.c
./test/tohdr.c
./test/tstab.c
./testpar/phdf5.c
Renamed file access constants to follow the naming scheme.
Also changed the base names a little to be more accurate as to
what they do. The old names H5ACC_WRITE and H5ACC_OVERWRITE
will temporarily work.
H5ACC_DEFAULT --> H5F_ACC_RDONLY for H5Fopen()
H5ACC_DEFAULT --> H5F_ACC_EXCL for H5Fcreate()
H5ACC_WRITE --> H5F_ACC_RDWR
H5ACC_OVERWRITE --> H5F_ACC_TRUNC
Albert or Kim: The H5ACC_INDEPENDENT and H5ACC_COLLECTIVE
macros in H5Fpublic.h should be an enum typedef and have names
more like H5F_MPIO_INDEPENDENT and H5F_MPIO_COLLECTIVE. Also
change the access_mode argument of H5Cset_mpio().
H5Fcreate() and H5Fopen() are more strict now about which
flags are acceptable for the operation.
./src/H5Fprivate.h
./src/H5F.c
./src/H5C.c
Changed the file access template to make it more general. A
union contains a struct for each type of low-level driver and
the default template is initialized at run-time.
./src/H5Fpublic.h
./src/H5F.c
Added H5Fget_access_template() and cleaned up
H5Fget_create_template().
./src/H5C.c
The H5Cset_mpi() no longer trashes the file access template
when an error is detected. We check for errors and *then*
update the file access template.
Added H5C_close() so Albert and Kim have a place to release
the MPI communicator and info from the file access property
list.
Kim or Albert: I notice in H5Cset_mpi() you copy the MPI
communicator. Do you need to do something similar in
H5C_copy()?
./src/H5F.c
Added more error checking for the file creation and access
property lists because it used to be possible to make the
library dump core by swapping the creation and access property
list ID numbers of H5Fcreate().
./test/istore.c
./test/tfile.c
./test/th5p.c
./test/theap.c
./test/tohdr.c
./test/tstab.c
./testpar/testphdf5.c
One must pass H5C_DEFAULT as the file creation or access
property list in order to get the default property list. It
is no longer possible to pass zero or any other arbitrary bad
object ID.
./src/H5Fcore.c
./src/H5Ffamly.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5MF.c
The file access property list is passed to all H5F_low_...()
functions and to the drivers.
./src/H5Fcore.c
The block size can be set at run time on a per-file basis
instead of at compile time across all files. The "5000 items in
a group test" now takes 1.6 seconds.
./src/H5private.h
Removed inclusion of mpi.h and mpio.h since they're included
from H5public.h.
./src/H5Cpublic.h
./src/H5C.c
Added H5Cset_stdio(), H5Cset_sec2(), H5Cset_core(),
H5Cset_split(), and H5Cset_family() in addition to the
H5Cset_mpio() that Kim and Albert already wrote. We still
need the H5Cget_driver() and an H5Cget...() counterpart for
each of those functions. The split and family drivers still
need a little work but I'm checking this in anyway.
while he is visiting LLNL. I changed the default creation template
offset and length to 4. Will fix the problem later.
Changes since 19980205
----------------------
./src/H5H.c
./src/H5Hprivate.h
./src/H5O.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Onull.c
./src/H5Oprivate.h
./src/H5Odspace.c
./src/H5Ostab.c
./src/debug.c
./html/H5.format.html
Added an extra 4-byte field after the heap magic number for
alignment on the DEC alpha. Changed object header message
alignment to 8-bytes.
./src/H5F.c
./src/H5Farray.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5Gnode.c
./src/H5O.c
./src/H5Odtype.c
./src/H5P.c
./src/H5Pprivate.h
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
./src/H5V.c
./src/H5detect.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/hyperslab.c
./test/istore.c
./test/th5p.c
./test/theap.c
Fixed a few irix64 warnings regarding size_t vs. int,
variables set but not used, printf formats
./config/irix64
Added `-woff 1196' to get rid of errors about __vfork() being
implicitly defined in a system header file.
./src/H5B.c
Fixed a stack alignment problem.
----------------------
./INSTALL
Added instructions for which C flags to set for debugging.
./src/H5C.c
./src/H5Cpublic.h
H5Cset_chunk() takes const pointer.
./src/H5D.c
./src/H5Dprivate.h
./src/H5Dpublic.h
Added H5Dextend() to extend the dimensions of a dataset.
./src/H5Osdspace.c
./src/H5P.c
./src/H5Pprivate.h
./src/H5Ppublic.h
./test/cmpd_dset.c
./test/dsets.c
./test/th5p.c
Added the optional `maxdims' argument to H5Pcreate_simple()
and defined constant H5P_UNLIMITED which can appear in the
maxdims. Added `const' to arguments.
Implemented H5Pcopy()
Removed the unused file argument from H5P_modify.
Added H5P_extend().
Removed the `flags' field from simple data types and we
determine if the `max' or `perm' arrays are valid by looking
at the pointer. Cleaned up the H5O_sdspace_debug output.
./src/H5T.c
Fixed a printf format.
./MANIFEST
./test/Makefile.in
./test/extend.c [NEW]
Added a test for multi-dimensional unlimited dimensions.
----------------------
./RELEASE
Added Library functions that I missed the first time.
./html/Datasets.html
Added an example for Elena's question about how to read a
single member of a compound data type so it becomes an array
of that member in memory.
./src/H5Pprivate.h
Fixed the prototype for H5P_get_hyperslab() to match the
definition.
./src/H5Psimp.c
Oops, added the kludge back in for the offset argument, which
is still an `intn' instead of a `size_t'.
./src/H5.c
./src/H5public.h
./src/H5F.c
./src/H5T.c
./src/H5Tpublic.h
Changed H5init() to H5open() and added an H5close() to fit our
create/open/close paradigm. The H5open() happens
automatically on the first call to the HDF5 library. The
H5close() happens automatically on exit() (unless the app
turns off that feature). H5close() closes all datasets and
files and releases all resources used by the library.
./test/dsets.c
Added calls to H5open() and H5close() to test them.
./test/dtypes.c
Removed call to H5init() since we no longer need it there.
./src/H5Fstdio.c
Changed the PABLO_MASK to the right value. Thanks Kim.
Problem:
Step 8 failed because H5Pcreate_simple expects size_t dimension
array but the code used an int array. (In IRIX64 -64 mode, size_t
is a 64bit unsigned long but ints are only 32 bits long.) casting
it to size_t* just avoided warning message but did not change the
data type.
Solution:
Throw in a kludge by using a temporary dimension array of size_t.
Can't change the type of h_size since it is also used for the hyperslab
routine which expects an int dimension array. The Hyperslab routine
will be changed. Put in a patch for now.
----------------------
./config/conclude.in
The maintainer-clean target removes Emacs backup files,
mirroring backup and contrib files, core files, and profile
output files in addition to what it used to remove.
./src/H5D.c
Fixed a buffer allocation bug in the output pipeline.
./src/H5Gnode.c
Fixed a comparison against size_t
./test/Makefile.in
Added the other temporary h5 files to the `MOSTLYCLEAN' var.
./test/cmpd_dset.c
Added four tests for partial I/O. Don't you just love it when
something works on the first try!
----------------------
./src/H5D.c
./src/H5Dpublic.c
Added H5Dget_space().
./src/H5Gstab.c
./src/H5H.c
Fixed a comparison with size_t against <0.
./src/H5P.c
./src/H5Pprivate.h
./src/H5Ppublic.h
Changed `intn' to `int' for public function args and
returns. H5Pget_hyperslab() returns the dimensionality.
./test/testhdf5.h
Clears error stack more frequently.
./src/H5Psimp.c
./test/cmpd_dset.c
Impelementing data space conversion.
----------------------
./src/H5D.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
./test/cmpd_dset.c
Added support to turn background buffer on/off to help speed
up conversions. Currently, every type of conversion turns it
off except compound-->compound conversions which always turn
it on. In the future the compound-->compound conversions
might be more frugal.
