----------------------
./src/H5T.c
Fixed a typo in the registration of the `unsigned char' to
`unsigned long long' type conversion that caused it to not be
registered, falling back to software whenever that conversion
path was taken.
./MANIFEST
./test/Makefile.in
./test/testhdf5.c
./test/testhdf5.h
./test/theap.c [REMOVED]
./test/lheap.c [NEW]
./test/tohdr.c [REMOVED]
./test/ohdr.c [NEW]
./test/tstab.c [REMOVED]
./test/stab.c [NEW]
Removed the `t' from the front of these names and made each
test a stand-alone program following the format of most of the
other tests.
./test/big.c
Uses libh5test.a but always sets the low-level driver to 1GB
file family.
The `#if' near the top to set the data space to 8GB has been
simplified now that `long_long' is always defined and the
error message is improved when `long_long' isn't wide enough.
Cleanup code was added to the error handling.
./test/gheap.c
./test/istore.c
Uses libh5test.a. Added error cleanup code.
./test/dtypes.c
./test/h5test.c
Added 68 new tests that check hardware and software
conversions between `long long' and `unsigned long long' and
the other integer types. The tests only run on machines where
sizeof(long_long)!=sizeof(long). We test a total of 180
different integer conversions, half in hardware and half in
software.
Cut down the number of times each test is run from 5 to 1 so
it doesn't take so long. If you want to run more times
there's a constant that can be changed at the top of the file.
./test/extend.c
Removed unused variable.
./test/h5test.c
./test/h5test.h
./test/external.c
./test/fillval.c
The h5_cleanup() returns true/false so it can be used in an `if'
statement to clean up additional files.
./doc/html/Environment.html
Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions.
./src/H5P.c
Changed the trace type for the second argument from `Iu' to
`x' since it's an output parameter.
./INSTALL
Added a warning that the GNU zlib that comes with the latest
version of HDF4 is too old to use with HDF5 and must be
renamed so configure doesn't see it when `--enable-hdf4' is
used.
----------------------
./src/H5Tconv.c
With my poor eyesight I missed the definitions of SCHAR_MIN
and SCHAR_MAX in <limits.h> and used CHAR_MIN and CHAR_MAX
incorrectly. I changed all occurrences of the latter to the
former and the new hardware integer type conversions now work
on Irix.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5private.h
./src/H5.c
./test/h5test.c
Added a wrapper for HDsnprintf() that just calls sprintf() if
snprintf() isn't available.
./MANIFEST
Added Paul's new h5toh4 files.
----------------------
./MANIFEST
./test/Makefile.in
./test/shtype.c [REMOVED]
Removed shtype.c because it was all commented out. Besides,
these tests are done in dtypes.c now anyway.
./test/external.c
./test/fillval.c
./test/flush1.c
./test/flush2.c
./test/links.c
./test/mount.c
./test/mtime.c
./test/unlink.c
The tests that check the HDF5 API use the h5test support
functions. For one thing, that means that you can specify the
file driver that thay use by the HDF5_DRIVER environment
variable. Possible values are:
HDF5_DRIVER='sec2' Use read() and write()
HDF5_DRIVER='stdio' Use fread() and fwrite()
HDF5_DRIVER='core' Use malloc() and free()
HDF5_DRIVER='split' Split meta and raw data
HDF5_DRIVER='family N' Use file families with each
member being N megabytes (N
can be fractional, defaults to
one).
Some tests might fail for certain drivers: for instance, the
mount and link tests fail for the `core' driver because
they must be able to close and then reopen a file.
----------------------
./src/H5.c
./src/H5A.c
./src/H5AC.c
./src/H5B.c
./src/H5D.c
./src/H5E.c
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gstab.c
./src/H5HG.c
./src/H5HL.c
./src/H5I.c
./src/H5Iprivate.h
./src/H5MF.c
./src/H5MM.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5Sselect.c
./src/H5T.c
./src/H5TB.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5V.c
./src/H5Z.c
./src/H5detect.c
./src/H5private.h
Most of these changes are because the `interface_initialize_g'
variable change from hbool_t to int. It's a one line change.
Changed the way the library is closed so we have more control
over the order the interfaces are shut down. Instead of
registering an atexit() function for every interface in some
haphazard order we just register one: H5_term_library() which
then calls the H5*_term_interface() functions in a
well-defined order.
If the library is closed and then reopened repeatedly by
calling H5close() and H5open() in a loop we only add one copy
of the library termination functions with atexit().
Termination is a two-step process in order to help detect
programming errors that would cause an infinite loop caused by
the termination of one interface waking up some other
previously terminated interface. The first step terminates
the interface and *marks it as unusable*. After all
interfaces are terminated then we mark them all as usable
again. The FUNC_ENTER() macro has been modified to return
failure or to dump core (depending on whether NDEBUG is
defined) if we try to call an interface while it's shutting
down.
./src/H5.c
The H5dont_atexit() function returns failure if it's called
more than once or if it's called too late. However, the error
stack is not automatically printed on failure because the
library might not be initialized yet
./test/chunk.c
./test/flush1.c
./test/flush2.c
./test/iopipe.c
./test/overhead.c
./test/ragged.c
Changed the extra cast for Win32 so we do floating point
division again -- it was just confusion about precedence and
associativity of casting and the C coercion rules. Removed
extra carriage returns inserted by broken operating system.
./src/H5Ffamily.c
Fixed an bug where H5F_fam_write() lowered the EOF marker for
one of the family members causing H5F_fam_read() to read
zeros.
./test/h5test.h [NEW]
./test/h5test.c [NEW]
./test/Makefile.in
./test/bittests.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
Support library for test files. This isn't done yet but
Katie's contractions are ~10 minutes apart so I figured I
better back this stuff up just in case I'm not here next
week...
Eventually all test files will understand HDF5_DRIVER to name
the low level file driver and parameters so we can easily test
various drivers. They will also understand HDF5_PREFIX to
prepend to the beginning of file names which is necessary for
testing ROMIO with various drivers. Also, the cleanup function
will know how to use the file name prefix and will understand
different file driver naming schemes like file families. I'm
not sure they'll understand the `gsf:' type prefixes yet.
Note, the external test is completely commented out because
I'm in the middle of modifying it. It will still compile and
run but it doesn't test anything at the moment.
----------------------
./INSTALL
Added instructions about specifying a path for GNU zlib and
HDF4 headers and library.
Added comments for each of the tool names. Added h5toh4 as a
tool name.
./configure.in
./conigure [REGENERATED]
./src/H5config.h.in [REGENERATED]
The config/* scripts get invoked with $CC_BASENAME set the
base name of the compiler in order to make it easier to handle
setting compiler flags for different compilers in a big case
statement. For instance, if $CC has the value
/usr/local/mpi/bin/mpicc -ansi -64
then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not
set if $CC is not set.
Fixed alignment in `configure --help'.
An include and/or library path can be specified for GNU zlib
if configure can't find it in normal places. The "normal"
means wherever your compiler normally searches, including
search paths you've added through environment variables like
CPPFLAGS and LDFLAGS. The INSTALL file has instructions.
The `-ljpeg' library is detected.
If `ssize_t' is not found then a #define is added to
H5config.h similar to what we already do for `size_t'.
We detect the hdf5 header file `mfhdf.h' and libraries
`-lmfhdf' and `-ldf' and if found define the H5TOH4 and
TESTH5TOH4 Makefile variables. The user can specify an
include and/or library path. The INSTALL file has
instructions.
The `RUNTEST' variable has been split into `RUNSERIAL' and
`RUNPARALLEL' because these are different commands. The
makefile still uses `RUNTEST', which defaults to the RUNSERIAL
value. The new testpar/Makefile.in sets RUNTEST to the
RUNPARALLEL value. The default RUNSERIAL value is empty and
the default RUNPARALLEL value is `mpirun -np 2'. These can
both be overridden in the config/* files. To make the value
the empty string set it like `RUNPARALLEL=none' in the
config/* file.
The new testpar/Makefile is generated from testpar/Makefile.in
./config/commence.in
Added the RUNSERIAL and RUNPARALLEL makefile definitions.
./src/Makefile.in
The `H5detect' program is run with RUNSERIAL, which is empty
on all platforms except intel-osf1 (ASCI/Red)
./config/conclude.in
Removed the `.c.a:' implicit rule -- we don't use it any more.
./config/BlankForm
./config/alpha-dec
./config/alpha-dec-osf4.0
./config/freebsd2.2.7
./config/hpux10.20
./config/hpux9.03
./config/intel-osf1
./config/irix5.3
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
All of these files have been updated to hande multiple
compilers. Most of them assume `cc' if CC is not set. The
documentation in `BlankForm' has been updated and
documentation in the other files refer to `BlankForm'.
The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra
library search paths.
./examples/Makefile.in
./test/Makefile.in
./tools/Makefile.in
Simplified by grouping some dependency information together
more succinctly.
The tools Makefile.in has been modified to work with the
`h5toh4' and `testh5toh4' programs. Until Paul checks these
in you may have problems compiling. If so, just create files
h5toh4.c and testh5toh4.c that contain:
#include <stdio.h>
int main(int argc, char *argv[]) {
fprintf(stderr, "%s: not implemented\n", argv[0]);
return 1;
}
./src/H5public.h
Removed definition for `ssize_t' since this is now handled by
configure in H5config.h with a #define.
./MANIFEST
./testpar/Makefile.in [NEW]
Added a makefile for parallel tests. As soon as we get this
working properly we can remove the other four makefiles in
that directory and maintain just one.
----------------------
./MANIFEST
Added new Pablo files HDF5record_RT.h and ProcIDs.h
./acconfig.h
./configure [REGENERATED]
./configure.in
./src/H5.c
./src/H5Vprivate.h
./src/H5config.h.in [REGENERATED]
./src/H5private.h
./src/H5public.h
./test/big.c
Added more configuration stuff for the Win32 environment. Removed all
the #ifdef WIN32 from the source and replaced them with OS-independent
stuff. Specifics follow:
Check for non-Posix.1 `st_blocks' field in `struct stat' which is used
by the big file test to decide if the file system supports holes. If
the st_blocks field isn't present then we just skip the test.
Configure checks for <io.h> <sys/resource.h> <sys/time.h> and
<winsock.h> and defines HAVE_IO_H, HAVE_SYS_RESOURCE_H,
HAVE_SYS_TIME_H and HAVE_WINSOCK_H when they're found.
Configure checks whether both <sys/time.h> and <time.h> can be
included and defines SYS_TIME_WITH_TIME if so. Otherwise include only
<sys/time.h> or <time.h> even if both exist.
Configure checks sizeof(__int64) and defines SIZEOF___INT64 to the
result or to zero if __int64 isn't defined. The source uses `long
long' in preference to `__int64'.
Removed null WIN32 definition for `inline' since such a definition
already exists in H5config.h
Protected gettimeofday() calls in debugging code with
HAVE_GETTIMEOFDAY instead of WIN32.
./src/H5F.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fstdio.h
./src/H5P.c
./src/H5Tconv.c
./src/H5private.h
Removed #include of system files from library source files and
consolodated them into H5private.h where they're protected by various
configuration macros (most of them were duplicated there already
anyway).
./test/big.c
./test/chunk.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
./test/fillval.c
./test/flush1.c
./test/flush2.c
./test/iopipe.c
./test/links.c
./test/mount.c
./test/mtime.c
./test/overhead.c
./test/ragged.c
./test/shtype.c
./test/unlink.c
Protected system #include's with #ifdef's from H5config.h.
Undefined NDEBUG since some of the tests rely on assert() to check
return values.
Removed WIN32 definitions for __unused__ since this can be controlled
by the definition of HAVE_ATTRIBUTE in H5config.h
./test/testhdf5.h
Removed the CLEAN_CMD definition because we no longer use it.
Albert's cleanup() functions replaced it.
./test/fillval.c
Initialized auto hid_t variables to fix warnings in error recovery
code when data flow analysis is turned on in compilers.
./test/h5tools.c
Initialized an auto variable to fix a compiler warning.
./test/chunk.c
./test/ragged.c
The WIN32 had some unsigned variables changed to signed because the
compiler generates warnings when coercing unsigned to double(?). I
changed them back to unsigned because they really are unsigned
quantities. If this the change was just to shut up extraneous warnings
then perhaps a compiler flag can do the same; otherwise if the
compiler generates bad code then we should supply a patch file instead
messing up source code with bug work-arounds.
./src/H5detect.c
Protected system #include's with #ifdef's from H5config.h thereby
removing a WIN32.
If getpwuid() doesn't exist (HAVE_GETPWUID) then we assume that
`struct passwd' doesn't exist either (we don't really need it in that
case).
The H5T_NATIVE_LLONG and H5T_NATIVE_ULLONG are defined in terms of
`long long' or else `__int64' or else `long' depending on what's
available.
./src/H5Flow.c
./src/H5Ofill.c
Added __unused__ to some function arguments that aren't used when
assertions are turned off.
./src/H5V.c
Changed an auto variable name in some hand-inlined code to get rid of
a warning about the variable shadowing a previous auto.
hdf5/doc/html/RM_H5I.html
hdf5/doc/html/RM_H5R.html
hdf5/doc/html/References.html
Labelled all files in hdf5/doc/src/ as "do not distribute."
Added hdf5/doc/html/DDL.html, but labelled as "do not distribute."
----------------------
./MANIFEST
./test/th5s.h5 [NEW]
./test/th5s.c
Added a test to make sure that creating a data space with too
large a rank fails.
Added a test to make sure that reading a file that has a
dataset with a space with too large a rank fails. Actually,
this one is a little weird: the code that reads the data space
message assumes the space is scalar if the message cannot be
read. Fortunately the layout message fails also, preventing
the dataset from being opened. However, since the data type
message is still visible h5ls will report that the object is a
named data type.
./test/space_overflow.c [NEW]
This is the little program that makes the th5s.h5 file.
./src/H5A.c
./src/H5R.c
./src/H5Sselect.c
Updated trace info.
./src/H5Olayout.c
./src/H5Osdspace.c
Added code to fail if the dimensionality is too large when
decoding a layout or simple data space message.
./src/H5Oprivate.h
Redefined H5O_LAYOUT_NDIMS in terms of H5S_MAX_RANK.
./src/H5P.c
./src/H5S.c
Check for ndims>H5S_MAX_RANK in API function calls, added
assert to internal functions.
./src/H5V.c
Changed a `<' to an `<=' in an assert.
./test/flush2.c
Includes stdlib.h for getenv().
./tools/h5tools.c
Able to handle up to H5S_MAX_RANK dimensions during output.
----------------------
./MANIFEST
./test/Makefile.in
./test/flush1.c [NEW]
./test/flush2.c [NEW]
Test to see if calling H5Fflush() results in a consistent
file.
./src/H5.c
./src/H5A.c
./src/H5D.c
./src/H5Fistore.c
./src/H5I.c
./src/H5S.c
./src/H5Shyper.c
./src/H5Sselect.c
./src/H5TB.c
Changed comparisons against SUCCEED and FAIL to >=0 and <0 in
about 15 places.
./src/H5.c
./src/H5V.c
./src/H5detect.c
./src/H5private.h
./src/H5public.h
./test/big.c
./test/chunk.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/external.c
./test/fillval.c
./test/iopipe.c
./test/links.c
./test/mount.c
./test/mtime.c
./test/ragged.c
./test/shtype.c
./test/unlink.c
Removed ^M from the end of lines inserted on broken OS's ;-)
./src/H5private.h
Changed c++ comments to c comments.
./src/H5R.c
Added tracing macros.
----------------------
./MANIFEST
./doc/html/study.html [DELETED]
./doc/html/study_1000x1000.gif [DELETED]
./doc/html/study_250x250.gif [DELETED]
./doc/html/study_499x499.gif [DELETED]
./doc/html/study_5000x1000.gif [DELETED]
./doc/html/study_500x500.gif [DELETED]
./doc/html/study_p1.gif [DELETED]
./doc/html/study_p1.obj [DELETED]
Removed these old files -- the data was from before the chunk
cache was implemented and therefore the whole file was pretty
much garbage.
./MANIFEST
./doc/html/Chunking.html [NEW]
./doc/html/Chunk_f1.gif [NEW]
./doc/html/Chunk_f1.obj [NEW]
./doc/html/Chunk_f2.gif [NEW]
./doc/html/Chunk_f2.obj [NEW]
./doc/html/Chunk_f3.gif [NEW]
./doc/html/Chunk_f4.gif [NEW]
./doc/html/Chunk_f5.gif [NEW]
./doc/html/Chunk_f6.gif [NEW]
./doc/html/Chunk_f6.obj [NEW]
New documentation for chunking. It's not quite complete but
it gives a pretty good idea of some of the issues affecting
performance.
----------------------
./src/H5.c
Fixed a signed vs. unsigned comparison.
./src/H5D.c
Setting a fill value of all zeros will cause the fill value to
be written to the dataset instead of relying on the low-level
file driver initializing unwritten areas with zero.
./src/H5D.c
./src/H5F.c
./src/H5Fprivate.h
./src/H5G.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5O.c
./src/H5T.c
More file mounting stuff.
./src/H5I.c
Fixed a bug where trying to close an invalid object id caused
a core dump. For instance, H5Gclose(-1).
./MANIFEST
./test/Makefile.in
./test/mount.c [NEW]
Mounting tests.
./src/H5R.c
Fixed a couple (herr_t)NULL casts.
----------------------
./src/H5D.c
Fill values are working for contiguous datasets now except
there are two things that need more support from the data
space layer, specifically the ability to form a selection from
the difference of two selections. They are (1) extending an
external contiguous dataset, (2) optimization by delaying the
fill until after the first H5Dwrite().
Renamed H5D_allocate() to H5D_init_storage() since allocation
is only part of the story. Added a data space argument so it
doesn't have to query the space from the object header -- the
space is always available in the caller anyway.
Removed `#ifdef HAVE_PARALLEL' from a few places where it
wasn't necessary. We don't need it around code that doesn't
compile anything from mpi.h or mpio.h.
./src/H5Fistore.c
Uncommented H5F_istore_alloc() for non-parallel and moved the
`#ifdef HAVE_PARALLEL' just around Kim's barrier.
./src/H5Fmpio.c
Wrapped a couple long lines.
Got rid of two signed vs. unsigned comparison warnings.
./MANIFEST
./test/Makefile.in
./test/fillval.c [NEW]
Added tests for fill values. The contiguous dataset extend
test is disabled until H5S_SELECT_DIFF is implemented.
./tools/Makefile.in
Fixed a bug where `make test' didn't build the executables
first. This should cause the snapshots to start up again.
./Makefile.in
Changed to build in `test' directory before `tools'
directory. We want the library tests to pass before we even
start considering the tools. You can still build and/or test
the tools independent of the library tests passing.
Changes since 19980930
----------------------
./MANIFEST
./doc/html/H5.format.html
./src/H5D.c
./src/H5Dprivate.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5O.c
./src/H5Ofill.c [NEW]
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/Makefile.in
Added fill values as documented in previous e-mails. They only
work for chunked datasets so far.
./src/H5E.c
./src/H5Epublic.h
./src/H5P.c
Changed H5E_TEMPLATE to H5E_PLIST.
./src/H5Omtime.c
./src/H5V.c
Fixed a typo in a comment.
./src/H5Tconv.c
Fixed a bug in compound type conversions that caused an
assertion to fail.
----------------------
./MANIFEST
Changed freebsd2.2.1 to freebsd2.2.7 to match change in file name.
Added a few missing files. Are all of these supposed to be
distributed?
./tools/testfiles/h5dumptst.c
+ ./tools/testfiles/tall-1.ddl
+ ./tools/testfiles/tall-2.ddl
+ ./tools/testfiles/tall-3.ddl
./tools/testfiles/tall.ddl
./tools/testfiles/tall.h5
+ ./tools/testfiles/tattr-1.ddl
+ ./tools/testfiles/tattr-2.ddl
+ ./tools/testfiles/tattr-3.ddl
+ ./tools/testfiles/tattr-4.ddl
./tools/testfiles/tattr.ddl
./tools/testfiles/tattr.h5
+ ./tools/testfiles/tdset-1.ddl
+ ./tools/testfiles/tdset-2.ddl
+ ./tools/testfiles/tdset-3.ddl
+ ./tools/testfiles/tdset-4.ddl
./tools/testfiles/tdset.ddl
./tools/testfiles/tdset.h5
+ ./tools/testfiles/tgroup-1.ddl
+ ./tools/testfiles/tgroup-2.ddl
+ ./tools/testfiles/tgroup-3.ddl
./tools/testfiles/tgroup.ddl
./tools/testfiles/tgroup.h5
+ ./tools/testfiles/tslink-1.ddl
+ ./tools/testfiles/tslink-2.ddl
./tools/testfiles/tslink.ddl
./tools/testfiles/tslink.h5
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dprivate.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5Gstab.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
./test/istore.c
Implemented split ratios as documented in previous
e-mails. Frank, the new API functions are H5Pget_btree_ratios()
and H5Pset_btree_ratios().
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
Added more type checking for the data transfer property list
passed to these functions.
./src/H5D.c
Added a dataset transfer property list as an argument to
H5D_allocate() for the parallel version in order to pass split
ratios down to H5F_istore_lock(). Eventually we won't need
the split ratios for H5D_allocate() because we'll build a
completely full B-tree from the leaves up, but it might be
useful to have other transfer properties at that level
anyway. I always caled H5D_allocate() with &H5D_dflt_xfer.
./MANIFEST
./test/Makefile.in
./test/overhead.c [NEW]
Added an `overhead' test run by `make timings'.
----------------------
./MANIFEST
./src/H5B.c
./src/H5Bprivate.h
./src/H5G.c
./src/H5Gnode.c
./src/H5Gprivate.h
./test/Makefile.in
./test/unlink.c [NEW]
Finished H5Gunlink() and H5Grename().
./src/H5F.c
./src/H5Fistore.c
./src/H5Fprivate.h
Removed the last memcpy() from the chunk cache.
./src/H5Fistore.c
The offset of a chunk within a dataset is an 8-byte quantity
per dimension instead of 4 bytes.
./src/H5HL.c
Fixed infinite loops in H5HL_remove().
----------------------
./src/H5F.c
./src/H5Fprivate.h
./src/H5P.c
./src/H5Ppublic.h
./test/chunk.c
./test/dsets.c
The number of slots in the raw data cache can be queried or
set with H5Pget/set_cache(), which now take an extra argument.
The default number of slots is 521 and the default maximum
size is 1MB.
./src/H5Fistore.c
./src/H5Fprivate.h
Finished optimizations. The cache is now a hash and a linked
list instead of an array. The cpu time on my machine for
H5F_istore_lock() has been cut by 60% and H5F_istore_unlock() by
35%.
----------------------
./MANIFEST
Removed duplicate Ragged.html
./doc/src/Glossary.html
Changed 1.0 to 1.2 since 1.0 is the current development
branch, 1.1 will be development after beta release, and 1.2
will be the first complete release (see Version.html).
./test/dsets.c
./test/tstab.c
Added more tests.
----------------------
./COPYING
Reformatted as text instead of C. Removed zlib crew from the
list of contributors since no zlib code is actually in the
hdf5 library.
./INSTALL
./INSTALL.ascired
./MANIFEST
Minor updates for Beta release including version number
change.
./INSTALL_MAINT
Added information about making a release.
./RELEASE
Updated function list based on public header files.
./bin/checkposix
Got rid of complaints about some obvious things.
./doc/html/H5.api.html
./doc/html/RM_H5F.html
./src/H5F.c
./src/H5Fpublic.h
./test/tfile.c
Changed H5Fget_create_template() and H5Fget_access_template()
to H5Fget_create_plist() and H5Fget_access_plist() since that
conforms better to lots of other names.
./doc/html/Datatypes.html
./doc/html/ExternalFiles.html
./doc/html/Files.html
./doc/html/H5.api.html
./doc/html/H5.sample_code.html
./doc/html/RM_H5F.html
./doc/html/RM_H5Front.html
Changed `template' to `property list', etc.
./doc/html/Ragged.html [NEW]
Documentation for ragged arrays.
./src/H5Iprivate.h
./src/H5Ipublic.h
./src/H5I.c
Changed the scope of some symbols to be more local.
./src/H5.c
./src/H5AC.c
./src/H5D.c
./src/H5E.c
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5I.c
./src/H5O.c
./src/H5Ocomp.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5P.c
./src/H5S.c
./src/H5Shyper.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5V.c
./src/H5Z.c
./src/H5private.h
Fixed some violations of our naming scheme by adding HD to the
beginning of all Posix functions.
----------------------
./MANIFEST
./bin/release
./bin/snapshot
The format of the MANIFEST file has been relaxed -- comments
and blank lines should no longer confuse the tools that use
it.
As before, this file should contain a list of *all* files that
are part of HDF5, which means all files which are managed by
CVS/SVF. However, files can be marked so they're not part of
a release by adding _DO_NOT_DISTRIBUTE_ after the file name.
I've removed all the *.obj files from the distribution by
adding _DO_NOT_DISTRIBUTE_ after their names. I also removed
the old white-papers that might not apply to the current
version of the library and documentation about chunking
performance since it's wrong now that chunk caching is
implemented. Everyone please check the files you're
responsible for to make sure that they should really be part
of a release.
To get a list of all files use
grep '^\.' MANIFEST | cut -f1
To get a list of files for distribution use:
grep '^\.' MANIFEST | grep -v _DO_NOT_DISTRIBUTE_
(These commands assume tabs in the MANIFEST file. If the file
might contain spaces then run it through `unexpand' or `tr'
first).
./configure.in
./configure
./test/ragged.c
Check for sigaction().
./test/Makefile.in
The `clean' target removes the timing tests.
----------------------
./MANIFEST
./src/H5R.c [NEW]
./src/H5Rprivate.h [NEW]
./src/H5Rpublic.h [NEW]
./src/Makefile.in
./src/hdf5.h
./test/ragged.c [NEW]
Preliminary support for 2d ragged arrays for Mark Miller and
Jim Reus. Not fully implemented yet. The test is not actually
part of `make test' because we still have some memory problems.
./src/H5E.c
./src/H5Epublic.h
Added H5E_RAGGED as a major error number.
./bin/release
Checks the MANIFEST file against `svf ls' on systems that have
it.
./bin/trace
Fixed a bug that caused arguments of type `void *x[]' to not
be handled.
./src/H5.c
Removed unused variables and changed a couple types to
fix compiler warnings.
Added tracing support for ragged array object ID's and arrays
of pointers.
./src/H5D.c
H5Dcreate() will complain if either of the property lists are
invalid (instead of using the default).
./src/H5D.c
./src/H5Dprivate.h
Split H5Dget_space() into an API and internal function so it
can be called from the new ragged array layer.
./src/H5Fistore.c
Fixed warnings about unsigned vs. signed comparisons.
./src/H5Flow.c
Fixed a warning about a variable being shadowed in the MPI-IO
stuff.
./src/H5Iprivate.h
./src/H5Ipublic.h
Added the H5_RAGGED atom group.
./src/H5Shyper.c
Fixed some freeing-free-memory errors that resulted when
certain arrays were freed but the pointers were left in the
data structures. I simply set the pointers to null after they
were freed.
./src/H5Sprivate.h
./src/H5Sselect.c
Split the H5Sselect_hyperslab() function into an API and a
private function so it could be called from the ragged array
layer.
Added H5S_SEL_ERROR and H5S_SEL_N to the switch statements to
get rid or compiler warnings.
./src/H5Tconv.c
Removed a misleading comment.
./test/bittests.c
Fixed a warning about a printf().
./test/cmpd_dset.c
Fixed warnings about unused variables because of test #11
being commented out.
./bin/trace
Shortened the right margin for the output to allow room for
the `);' at the end of the TRACE() macros.
Fixed errors
H5.c
Fixed core dump with setvbuf() for debugging.
H5Fistore.c
Fixed bug with sparse datasets.
H5Omtime.c
Found a typo in "Posix Programmer's Guide". The `%z' in the
strftime() should be `%Z' instead.
H5T.c
H5Tpublic.h
Improved api tracing for H5Tinsert_array().
h5tools.c
Doesn't dump core for empty datasets.
----------------------
./MANIFEST
./src/H5Ssimp.c [REMOVED]
./src/Makefile.in
Removed H5Ssimp.c since it was no longer used.
./bin/snapshot
Fixed a few minor things to make it work better.
./src/H5D.c
Cleaned up H5D_read() and H5D_write() by combining some code
in each. Added timing calls around the data space calls when
H5S_DEBUG is defined.
./src/H5S.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Spoint.c
./src/H5Sprivate.h
Changed H5S_find() so it returns a table entry again instead
of copying the data into a caller-supplied buffer. This
allows the timers to be stored in the table and updated by the
caller. Added H5S_register() to register new table entries
and added entry creation to all the H5S selection
methods. Also changed lots of global functions to static
functions.
./src/H5Fistore.c
Fixed a memory bug in the raw data cache.
----------------------
./MANIFEST
Replaced Compression.html with Filters.html
./doc/html/Filters.html
./src/H5Ocomp.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5Z.c
./src/H5Zprivate.h
Added two extra arguments to H5Pget_filter() in order to
retrieve the filter name. The name is the name registered for
the filter with H5Zregister(), but if the dataset creation
property originally came from an existing file then the name
is that which is stored in the file.
./tools/h5ls.c
The `-v' option now prints the names of the filters.
./src/H5B.c
./src/H5Fistore.c
./src/H5O.c
./src/H5Oefl.c
./src/H5Oprivate.h
./src/H5P.c
Plugged a memory leak.
./src/H5MMprivate.h
H5MM_malloc(0) and H5MM_calloc(0) actually allocate a single
byte in order to be sure that we get a valid pointer.
./src/H5S.c
./src/H5Sselect.c
Fixed pointer->integer conversions in error return values in
three places.
----------------------
./MANIFEST
./test/Makefile.in
./test/mtime.c [NEW]
Test for the modification time message.
./src/H5AC.c
./src/H5Fistore.c
Turned off printing of statistics on H5close() if H5AC_DEBUG
isn't defined.
----------------------
./MANIFEST
./doc/html/H5.format.html
./src/H5O.c
./src/H5Oprivate.h
./src/H5Omtime.c [NEW]
./src/H5private.h
./src/Makefile.in
Added the modification time message. If an object header has
this message then it's value is updated with the current time
whenever anything changes in the object header.
./acconfig.h
./configure.in
Alas, there seems to be no standard way to convert a string
time like 19980727122800 in UTC to a time_t since mktime()
only converts local times to time_t. So I've modified the
configuration to check for various ways of getting the time
zone information:
* Added checks for the `tm_gmtoff' field of `struct tm'.
* Added a check for the `timezone' global variable.
* Added a check for `struct timezone'.
* Added a check for BSDgettimeofday().
* Added a check for gettimeofday() although it doesn't
actually set the timezone argument on some systems.
* Added a check to see if `tm_zone' is a member of `struct tm'.
* Added a check to see if `tzname' is a global variable.
* Added a check to see if `struct tm' is defined in time.h
or sys/time.h.
It's not difficult to get the right UTC modification message
into the object header, but some systems might have problems
getting the right time back out (Irix64 is one) and those
systems will report zero for the H5G_stat_t.mtime from an
H5Gstat() call as if the mtime message isn't even present. It
will, however, continue to be updated as normal.
./src/H5G.c
./src/H5Gpublic.h
The H5G_stat_t struct now contains an `mtime' field which will
hold the object modification time. If the object has no
object modification time then the `mtime' will be initialized
to zero.
Fixed a bug in H5G_stat() that caused the `objno' field of the
H5G_stat_t to be set incorrectly on some machines.
./src/H5D.c
Writing to external datasets fail if the hdf5 file is not open
for writing.
A modification time message is added to the dataset object
header when it's created and H5O_touch() is called from
H5D_write() to update that message.
./src/H5T.c
Fixed a bug in H5Tget_member_dims() that caused a segmentation
fault if one of the output array arguments was the null
pointer.
Relaxed the member dimension checking in H5Tinsert_array() so
it can also be used for scalar members.
./test/Makefile.in
Added additional file names to the `mostlyclean' target.
./tools/h5dump.c
./tools/h5tools.h
Increased the temporary buffer size to 1MB.
Added support for printing compound data types with array
members.
When printing H5T_NATIVE_CHAR and H5T_NATIVE_UCHAR we escape
double quote characters.
./tools/h5ls.c
Changed the output format a little because we were starting to
get too much info to fit on a line. Without `--verbose' each
object occupies one line of output. Otherwise, additional
information is printed below the object name: object file
address, comment, and modification time. If `--dump' is given
then the data is printed after the other information.
./test/cmpd_dset.c
Changed the way the dataset is initialized to be more uniform.
----------------------
./src/H5A.c
./src/H5Apublic.h
./test/tattr.c
Switched the order of the second and third argument of
H5Aget_name() to make it consistent with other functions that
take buffers and buffer sizes.
./src/H5G.c
./src/H5Gpublic.h
./src/H5Gprivate.h
The H5Gget_comment() function returns the size of the comment
including the null terminator. If the object has no comment
then zero is returned. If an error occurs then a negative
value is returned.
./MANIFEST
./tools/Makefile.in
./tools/h5tools.h [NEW]
./tools/h5dump.c [NEW]
Created a library for printing values of datasets in a way
that looks nice. It's not done yet, but I needed it for
debugging the contents of files from Jim Reus.
./tools/h5ls.c
Added the `-d' and `--dump' options which cause the contents
of a dataset to be printed. Added `-w N' and `--width=N'
options to control how wide the raw data output should be. If
you want single-column output then say `-w1'.
Printing dataset values can now handle datasets of any integer
or floating point atomic type. As a special case, integers
which are one byte wide are treated a character strings for
now.
Sample output:
$ h5ls --dump --width=60 banana.hdf
ARCHIVE 0:0:0:744 Dataset {52/Inf}
Data:
(0) "U struct complex { double R; double I; };\012V"
(43) " double;\012"
U 0:0:0:2500 Dataset {256/512}
Data: printing of compound data types is not implemented yet
V 0:0:0:3928 Dataset {256/512}
Data:
(0) 0, 0.015625, 0.03125, 0.046875, 0.0625,
(5) 0.078125, 0.09375, 0.109375, 0.125, 0.140625,
(10) 0.15625, 0.171875, 0.1875, 0.203125, 0.21875,
(15) 0.234375, 0.25, 0.265625, 0.28125, 0.296875,
...
----------------------
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsplit.c
Changed the allocation size request from `size_t' to `hsize_t'
because it was overflowing for the `big' test.
./src/H5detect.c
If `long double' and `double' are the same size then we define
H5T_NATIVE_LDOUBLE to be the same as H5T_NATIVE_DOUBLE.
Similarly for `long' vs. `long long' and `unsigned long' vs.
`unsigned long long'.
./test/Makefile.in
Added `big' to the list of tests to normally run.
./test/big.c
Added a check to see if the file system supports holes and if
it doesn't then the test is skipped.
./RELEASE
Added a couple minor details details about API tracing and
symbolic links.
./src/H5public.h
Added comments about the use of hbool_t. Fixed a comment
spelling error.
./test/testhdf5.h
Changed the way the version number is printed. The old method
was `hdf5-1.2.3d' and the new method is `hdf5 version 1.2
release 3'
./tools/h5ls.c
Only prints the max dimension if it differs from the current
dimension or if verbose mode is enabled. Added switches `-?',
`-h', and `--help' to print a usage message. Added switches
`-v' and `--verbose' to generate more verbose output. Added
switches `-V' and `--version' to print the version number and
exit. The version number is printed like: This is h5ls
version 1.0 release 24'
./bin/h5vers [NEW]
This script prints, sets, and/or increments the hdf5 version
number. It can be run from the top directory or any of the
child directories like src, tools, test, etc. Some examples:
$ h5vers # Display current version
1.0.24
$ h5vers -v
version 1.0 release 24 # Display current version.
$ h5vers -s 5.2.8 # Set version and display
5.2.8
$ h5vers -s 2.1
2.1.0
$ h5vers -s hdf5-1.0.24a.tar.bz2
1.0.24
$ h5vers -s 'version 2.0 release 8'
2.0.8
$ h5vers -s 'junk 22 junk 33 more junk 66 and 99 junk'
33.66.99
$ h5vers -i major # Increment from 1.0.24
2.0.0
$ h5vers -i minor # Increment from 1.0.24
1.1.0
$ h5vers -i release # Increment from 1.0.24
1.0.25
$ h5vers ~/hdf5/src/H5public.h # Use an alternate file
1.0.24
./bin/checkapi [NEW]
Run from the src directory with arguments H5[A-Z]*.c and it
will print the locations of each place where an API function
was called from within the library. Use it as the compile or
grep command under Emacs and you can C-x ` through the list.
./bin/debug-ohdr [NEW]
Keeps track of H5O_open() and H5O_close() debugging messages
and lists the file addresses of the object headers that are
opened but never closed. You must enable the `o' debugging at
configuration time and pipe stderr into this script.
./bin/errors
Added a note to indicate that this script no longer works
because of changes in the HRETURN_ERROR() and HGOTO_ERROR()
macros.
./bin/iostats [NEW]
Watches output from the Linux strace program and accumulates
statistics about low-level access to an hdf5 file. The output
is a list of 2d data points which can be plotted by gnuplot to
show file seeking behavior.
./MANIFEST
Added new files.
----------------------
./Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in
./src/Makefile.in
./test/Makefile.in
Tests are no longer installed for `make install'. Added a new
target `make tests' that builds the tests but doesn't run them.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Added detection of fork() and waitpid(). If present the
contants HAVE_FORK and HAVE_WAITPID will be defined in
H5config.h.
./test/dtypes.c
Minor tweaks for systems that don't have fork() or waitpid().
./MANIFEST
./tools [NEW]
./tools/Makefile.in [NEW]
./tools/h5debug.c [NEW]
./tools/h5import.c [NEW]
./tools/h5ls.c [NEW]
./tools/h5repart.c [NEW]
Added a tools directory and moved tools from the src directory
to here.
----------------------
./README
./bin/release
The first line of the README file is updated automatically
by the `release' script to associate a date with a release
number. For example:
This is hdf5-1.0.9a released on 1998-06-09 18:00 UTC
Please refer to the INSTALL file for installation instructions.
./src/H5public.h
Release number incremented. This happens automatically now if
you run the `release' script in `-batch' mode. I'll stop
documenting changes to this file unless they're something
other than a release number change.
./MANIFEST
Added Elena's new files.
----------------------
./MANIFEST
Alphabetized. `d' comes before `e' :-)
./bin/release
Added the `-batch' option which causes the script to not ask
questions and to automatically update the minor version
number and set the patch level back to `a'. This is intended
to be used for the daily snapshots:
#! /bin/sh
set -e
cd ~/hdf5
make distclean
make test
bin/release -batch tar compress gzip bzip2
mv ./releases/* /repository
./src/H5Z.c
Removed warnings about unused variables when the zlib.h header
file is present but libz.a isn't.
./INSTALL
./configure.in
./doc/html/tracing.html
Made API tracing the default (you still need to define the
HDF5_TRACE environment variable to get results) and change the
name from `--disable-tracing' to `--disable-trace' to make it
consistent with the other switches.
Changed `site config file' to `host config file' to match the
documentation.
./doc/html/H5.user.html
Added a reference to the `tracing.html' file.
----------------------
./MANIFEST
Added new files from testpar directory.
./config/commence.in
Removed -D_POSIX_SOURCE because hdf5 uses a couple of
non-Posix things when certain debugging flags are switched on.
----------------------
./MANIFEST
./configure.in
./examples/Makefile.in [NEW]
Added a Makefile.in for the examples directory. To generate
the Makefile run configure again.
----------------------
./src/H5Tbit.c
./src/H5Tpkg.h
Fixed a bug in H5T_bit_copy(). Added H5T_bit_get_d() and
H5T_bit_set_d() which treat portions of a bit vector as an
unsigned integer. Added H5T_bit_inc() that increments part of
a bit vector and returns an indication of overflow.
./src/H5Tconv.c
./src/H5Tpkg.h
./test/dtypes.c
Added a slow general floating point conversion which works so
far on Intel, MIPS, and DEC but the test is turned off because
a cast from double to float will cause a SIGFPE on some
systems if an overflow occurs.
Added fast hardware conversions between native floating point
types. This function is also subject to the SIGFPE problem.
./src/H5detect.c
Removed the exponent bias adjustment when the significand
isn't normalized. This is now handled in the conversion
functions instead.
./src/H5T.c
Register new conversion functions.
Plugged a memory leak in the library termination code.
./RELEASE
Added a list of major changes since the first alpha.
./src/H5.c
./src/H5private.h
./src/H5A.c
./src/H5AC.c
./src/H5D.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5G.c
./src/H5Gprivate.h
./src/H5HG.c
./src/H5O.c
./src/H5T.c
./src/H5Tbit.c
./src/H5Tconv.c
Fixed various compiler warnings on Irix64.
./src/H5MM.c
Added PABLO_MASK to this file.
./test/chunk.c
Removed a warning about memcpy().
----------------------
./html/tracing.html NEW
This entire update is to make it possible for the library to
print the name, arguments, and return value of every API call
without requiring any extra work from developers or app
programmers. This file describes how this all works.
./configure.in
Added the `--enable-tracing' switch. If you use it then the
library will include code to print API function names,
argument names and values, and function return values.
However, you must then turn on the tracing by setting the
HDF5_TRACE environment variable to a file descriptor number.
The default is `--disable-tracing' since enabling it causes a
slight increase in library size and a slowdown resulting from
an extra function call for each API function call (I couldn't
even measure the slowdown :-)
./bin/trace NEW
A perl script that synchronizes the H5TRACE() macro calls in
the *.c files with the function return type and formal
argument names and types. If you use GNU make and gcc then
this will be done automatically, otherwise just invoke this
script with the names of one or more .c files. You could do
it by hand to, but encoding argument types is a little tricky
at first.
./config/commence.in
Added the $(TRACE) macro, which defaults to the no-op.
Added -D_POSIX_SOURCE to the compiler command line.
./src/Makefile.in
Override the default for $(TRACE).
./config/depend.in
Automatically calls $(TRACE) to synchronize the H5TRACE()
macros in any source file that changed. As with makefile
dependencies, one way to force synchronization of all files is
to remove the `.depend' file.
./MANIFEST
Added new files.
./src/H5Eprivate.h
Modified HRETURN_ERROR() and HRETURN() for tracing.
./src/H5.c
./src/H5private.h
This is where the real tracing work really happens, in
H5_trace().
./src/H5A.c
./src/H5D.c
./src/H5G.c
./src/H5P.c
./src/H5S.c
./src/H5Z.c
Added H5TRACE() calls to all API functions. You don't really
need these changes if you don't want to merge your stuff
because they can be generated automatically by going to the
hdf5/src directory and saying ../bin/trace *.c
./src/H5T.c
Added H5TRACE() calls. Other stuff below.
./src/H5E.c
./src/H5Epublic.h
Added H5TRACE() calls. Created a type H5E_auto_t for the
`func' argument of H5Eset_auto() and H5Eget_auto() to make
those arguments easier to parse for tracing. It should also
make it clearer for users that don't know how to read
complicated ANSI data types.
./src/H5F.c
Added H5TRACE() calls. Changed a couple `uintn' argument
types in API functions to `unsigned int' since `uintn' part of
the API. Changed a few "can't" and "cant" error messages to
"unable to".
./src/H5Ipublic.h
Removed H5_DIRECTORY from the H5I_group_t enum. It wasn't
used anywhere.
./src/H5Tconv.c
Removed an unused label.
./src/H5Fistore.c
./src/H5Oattr.c
./src/H5Odtype.c
./src/H5T.c
./test/dsets.c
./test/dtypes.c
Fixed a warning about a variable possibly used before it's
initialized. Added __unused__ to turn off some unused
argument warnings that pop up when debugging is turned off and
optimizations are turned on.
----------------------
./src/H5Tbit.c
./MANIFEST
./test/Makefile.in
./test/bittests.c NEW
Finished the bit vector operations and added test cases.
./src/H5Tconv.c
./test/dtypes.c
Finished integer->integer general conversion and added test
cases. Overflows and underflows are handled by substituting
the closest possible value. Examples:
(unsigned)0xffff -> (unsigned) 0xff
( signed)0xffff -> (unsigned)0x0000
(unsigned)0xffff -> ( signed)0x7fff
( signed)0x7fff -> ( signed) 0x7f
( signed)0xbfff -> ( signed) 0xbf
( signed)0x8000 -> ( signed) 0x80
./src/H5private.h
Added definitions for MIN and MAX that take 3 or 4 arguments:
MIN3(), MIN4(), MAX3(), MAX4(). Also added MIN2() and MAX2()
as aliases for MIN() and MAX().
./test/tattr.c
Removed some redundant `&' operators.
./configure.in
./src/H5config.h.in [regenerated]
./src/H5.c
Fixed warnings on DEC where long double is the same as
double.
----------------------
THIS CHECKIN IS FOR QUINCEY -- NOT EVERYTHING WORKS (but it compiles)
MOST OF THE CHANGES ARE FOR BETTER TYPE CONVERSION IN THE NEXT ALPHA
./MANIFEST
./src/H5Tbit.c NEW
./src/Makefile.in
Bit vector operations (not done yet)
./configure.in
Added -lm to the library list, needed by bit-vector operations
and conversion functions.
Removed vestiges of PARALLEL_SRC no longer used by the
makefiles. Albert came up with a better way (that actually
works :-)
./src/H5D.c
No code changes. Split a couple of long lines, refilled a
couple multi-line comments.
./src/H5T.c
./src/H5Tpublic.h
Fixed a bug reported by Jim Reus regarding conversion of
compound data types whose members require conversions which
are satisfied by as-yet unregistered soft conversion
functions.
Added H5T_IEEE architecture, but the funny-looking integer
types will be changed to H5T_BE_ and H5T_LE_ architectures
with the type names changed to match the H5T_NATIVE_ integers.
Added an H5Tconvert() but it hasn't been documented or tested
yet.
./src/H5Tconv.c
./src/H5Tpkg.h
Registered conversion functions integer->integer (a general
case) and integer->float (for a specific case). The
integer->integer conversion depends on the bitvector
operations which aren't finished yet and the int->float
conversion hasn't been retested since it was borrowed from
AIO. Don't look at them yet, they're ugly :-)
./src/H5detect.c
Fixed a typo which caused the msb_pad field of an atomic type
to not be initialized.
./test/dtypes.c
Added a test for number conversions but it's commented out
until the conversion stuff is truly working.
----------------------
./html/Datasets.html
Fixed a couple of typos.
./src/H5.c
Added the `Z' modifier to HDfprintf() for `size_t' sizes. Use
it like this:
HDfprintf(stderr,"size is %Zd\n", (size_t)x);
./src/H5AC.c
./src/H5F.c
./src/H5Fprivate.h
The maximum number of meta data objects that can be cached can
be set from the application (but the library might not honor
it every time; it's a hint).
./src/H5D.c
Changed a warning message so it's not so alarming.
./src/H5Fistore.c
Chunks can be cached.
./src/H5O.c
./src/H5Oprivate.h
Added H5O_copy() and H5O_free() to copy and free messages.
./src/H5P.c
./src/H5Ppublic.h
Added H5Pset_cache() and H5Pget_cache() and changed lots of
"template" to "property list".
./src/H5Z.c
./src/H5Zpublic.h
Miscellaneous little things to clean up. Mostly just removed
H5Z_MAXVAL and added H5Z_USERDEF_MIN and H5Z_USERDEF_MAX.
./MANIFEST
./test/Makefile.in
./test/chunk.c [NEW]
Added a performance test for chunk caching. It looks at the
amount of I/O instead of timing because timing is partly
dependent on the chunk size and I wanted a measurement that
was a function of only the cache size. Run `chunk' with no
arguments and then say `gnuplot x-gnuplot' to see the plots
(press return between plots). Postscript files are created for
each plot.
./test/big.c
./test/cmpd_dset.c
./test/extend.c
./test/external.c
./test/gheap.c
Added H5F_ACC_DEBUG so we can see cache performance
statistics.
----------------------
./src/H5Bprivate.h
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fprivate.h
./src/H5Gpkg.h
./src/H5MF.c
./src/H5P.c
./src/H5Ppublic.h
./test/big.c
./html/Big.html
./html/Files.html
Family members can now be any size >1kB. Got rid of some
places where we were reading a property list after it was
closed.
./MANIFEST
./src/Makefile.in
./src/h5repart.c
A program to repartition file families. The source and/or
destination may be files or file families. Examples:
testhdf5 -c -o stab
h5repart -m 1m tstab2.h5 x%05d.h5
h5repart -m 100k x%05d.h5 y%05d.h5
h5repart y%05d.h5 z.h5
diff tstab2.h5 z.h5
./src/h5ls.c
Added a usage message, replaced assertions with error
messages.
./config/linux
Made a warning message more obvious. Added better
optimization flags for Pentium-Pro's.
----------------------
./bin/release
./src/H5.c
./src/H5private.h
./src/H5public.h
./src/H5Fpublic.h
Changed the version number constants to names that begin with
H5_VERS_ and added macros that check that the version numbers
in the include files match the version number of the library.
./MANIFEST
./html/H5.user.html
./html/Version.html [NEW]
./html/version.obj [NEW]
./html/version.gif [NEW]
Documented version numbers and the macros, constants, and
functions associated with them.
./bin/versinc
A perl script that increments the minor version number and
sets the patch level back to zero. This is intended to be
invoked from the top of the source tree by a cvs commit
anywhere in the source tree. Quincey?
./src/H5O.c
./src/H5Oprivate.h
Added H5O_count() to count the number of object header
messages of a particular type. Quincey needs this for the
attribute package.
./test/dsets.c
Fixed warnings. Enabled the small strip-mine buffer test.
./config/linux
Added optimizations for the Pentium-Pro for production mode.
----------------------
This checkin completes the compression stuff almost two weeks ahead of
schedule. It should now all be working and documented.
./Makefile.in
./config/commence.in
A distclean causes the distribution makefile to be copied to
Makefile again.
./src/H5D.c
Opening a compressed dataset now works properly.
./src/H5P.c
./src/H5Ppublic.h
The H5Pset_compression() and H5Pget_compression() now work as
documented.
./src/H5T.c
Fixed a bug that causes the library to crash sometimes if
debugging is turned on for the `t' package.
./src/H5Z.c
Fixed a bug where the number of bytes attributed to
compression overruns was too low in the debugging output.
./test/dsets.c
More compression tests: reading of uninitialized data, opening
an existing dataset and reading it, partial I/O which isn't
aligned on chunk boundaries, and use of application-defined
compression methods.
./MANIFEST
Removed ./test/dspace.c.
----------------------
./html/Compression.html [NEW]
./html/Datasets.html
./html/H5.format.html
./html/H5.user.html
Documented compression. A couple of the H5P functions aren't
quite implemented yet but they're coming soon...
./src/H5Dprivate.h
./src/H5E.c
./src/H5Epublic.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
./src/H5Ocomp.c [NEW]
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sprivate.h
./src/H5Ssimp.c
./src/H5Z.c [NEW]
./src/H5Zprivate.h [NEW]
./src/H5Zpublic.h [NEW]
./src/Makefile.in
./src/hdf5.h
./test/dsets.c
./test/istore.c
Compression is now mostly working. Don't try to open a
compressed dataset though because the compression message
won't be read.
./html/Datatypes.html
./html/H5.api.html
./src/H5.c
./src/H5private.h
./src/H5D.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
Added timing support. When compiled with H5T_DEBUG defined
the library will print conversion bandwidths when the library
closes. The H5Tregister functions take a string as the first
argument so the statistics output is meaningful.
./MANIFEST
Added new files.
./configure.in
./src/H5config.h.in
Check for getrusage(). Check for compress2() in libz.a and
the zlib.h header file. Added `z' to the debug list.
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
./src/debug.c
Cleaned up some indentation and added support to print istore
B-trees. From the debugger, give the B-tree address and the
dimensionality from the layout message of the object header.
./src/h5ls.c
The oid is printed as w❌y:z where w and x are the file ID
and y and z are the OID within the file. You can give z or
y*2^32+z as an argument to the debugger to print the object
header for the object.
./src/H5AC.c
Cleaned up statistics and made them match those reported by
H5T and H5Z.
./src/H5MM.c
./src/H5MMprivate.h
./src/H5Fistore.c
Finally got rid of a couple of long-standing const cast
warnings.
----------------------
./html/H5.format.html
./src/H5E.c
./src/H5Epublic.h
./src/H5F.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gprivate.h
./src/h5ls.c
./test/Makefile.in
Symbolic links are now supported. The ./test/links program
will create a `links.h5' file that demonstrates hard links,
soft links, dangling links, and recursive links. A symbolic
link is a symbol table entity and doesn't have an object
header. It's format is described in H5.format.hml.
./src/H5G.c
./src/H5Gpublic.h
./src/h5ls.c
Implemented H5Gstat() and H5Gget_linkval() as documented by
Quincey. The `H5G_type_t type' field of `H5G_stat_t' was
changed to `int type' because H5G_type_t was already used and
the `type' data type should be open-ended.
./src/H5Ffamily.c
Removed an incorrect diagnostic message.
./test/big.c
Added read/write calls to test partial I/O to big contiguous
datasets. With no arguments it writes to a dataset and prints
the list of points written which should be redirected to a
file. With an argument (the name of a file containing the
stdout of a run with no arguments) values are read from the
dataset. One would typically say `big >x && big x'.
----------------------
./INSTALL
./INSTALL_MAINT
Updated installation instructions.
./html/Big.html [NEW]
A guide to using big datasets on small machines.
./MANIFEST
Added Big.html and INSTALL.ascired.
./html/Datasets.html
./html/Dataspaces.html
./html/Datatypes.html
./html/Files.html
./html/H5.api.html
./html/H5.intro.html
./html/H5.sample_code.html
./html/H5.user.html
Updated documentation by changing lots of `size_t' arguments
to `hsize_t'. Added line numbers to some examples.
./html/H5.intro.html
Perhaps someone want's to volunteer to make this file
human-readable?
----------------------
./src/H5Osdspace.c
./html/H5.format.html
In the past we were allowed to have >2GB files on a 32-bit
machine as long as no dataset within the file was larger than
4GB (or whatever sizeof(size_t) is). That's been fixed now.
All dataset size calculations are done with `hsize_t' which is
normally defined as `unsigned long long'.
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fprivate.h
./src/H5P.c
./src/H5Ppublic.h
The file family member size can now be set/queried. The
default is still 64MB, but it can be set to 1GB by saying:
H5Pset_family (plist, 30, H5P_DEFAULT);
When opening an existing file family the specified
bits-per-member is ignored and the first member of the family
determines the bits-per-member, which can be retrieved with
H5Pget_family().
./acconfig.h
./configure.in
./src/H5config.h
./src/H5public.h
Added `--disable-hsizet' so that those with old GCC compilers
(<2.8.1) can still compile the code.
./src/H5.c
./src/H5private.h
Added HDfprintf() which works just like fprintf() except you
can give `H' as a size modifier for the integer conversions
and supply an `hsize_t' or `hssize_t' argument without casting
it. For instance:
hsize_t npoints = H5Sget_npoints(space);
HDfprintf(stdout,"Dataset has %Hd (%#018Hx) points\n",
npoints, npoints);
You can now give `%a' as a format to print an address, but all
formating flags are ignored and it causes the return value of
HDfprintf() to not include the characters in the address (but
who uses the return value anyway :-). Example:
H5G_t *grp;
HDfprintf(stdout, "Group object header at %a\n",
&(grp->ent.header));
Added HDstrtoll() which works exactly like [HD]strtol() except
the result is an int64.
./src/debug.c
Large addresses can now be entered from the command-line. Use
either decimal, octal (leading `0') or hexadecimal (leading
`0x') when giving the address.
./src/h5ls.c
The printf format for dataset dimensions was changed to `%Hu'
to support large datasets.
./test/big.c [NEW]
A test for big datasets on 32-bit machines. This test is not
run by default. Don't try to run it on an nfs-mounted file
system or other file system that doesn't support holes because
it creates two 32GB datasets of all zero.
----------------------
./MANIFEST
./test/Makefile.in
./test/shtype.c [NEW]
Added some tests for shared data types.
./configure.in
Removed MF and HL from the default debug list since. MF
because it hasn't been implemented yet and HL because it
produces lots of annoying messages about adjusting the size of
local heaps.
./src/H5F.c
./src/H5T.c
./src/H5Tprivate.h
Fixed a bug with opening the same file twice. The first close
on the file_id incorrectly closed shared data structs.
Closing a file now correctly unshares data types that might be
pointing into that file.
./src/H5T.c
./src/H5Tpublic.h
Added an H5Tis_shared(). The caller supplies a file and a
data type and the function returns true if the data type is
currently marked for sharing in that file.
./src/H5AC.c
./src/H5F.c
./src/H5HL.c
./src/H5HG.c
./src/H5MF.c
./src/H5O.c
We now detect errors sooner when writing to a read-only
file. In the past, the error might not show up until the
cached item was flushed, and it was sometimes possible to not
even get an error!
./src/H5I.c
./src/H5Iprivate.h
If the search function fails then H5I_search() returns
failure. Also, the first argument for the search function
isn't const anymore because we might want the search to have
side effects (like calling H5T_unshare() for all shared data
types whose file just closed).
----------------------
./MANIFEST
./src/Makefile.in
./test/Makefile.in
Added new files.
./config/linux
./src/H5HL.c
./src/H5HLprivate.h
./src/H5MF.c
./src/H5MFprivate.h
Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list.
./html/H5.format.html
Updated shared object message information.
./src/H5D.c
Datasets can now share data types.
./src/H5F.c
Updated a comment that referred to H5ACC_WRITE.
./src/H5HG.c
./src/H5HGprivate.h
Moved a few things around. Made debugging better so you can
now give a collection address to ./src/debug and it shows some
useful stuff.
./src/H5O.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Onull.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c [NEW]
./src/H5Ostab.c
Supports shared messages.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
The H5Tshare() function allows the user to give the library
hints about how a data type will be used.
./test/shtype.c
Tests the H5Tshare() function.
./test/gheap.c
Tests the global heap.
./configure.in
./config/BlankForm [NEW]
./config/alpha-dec
./config/freebsd2.2.1
./config/hpux10.20
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
Cleaned up lots of configuration stuff and made the site
configuration files lots easier and more uniform. To make a
new file grab the BlankForm and modify it.
By default, debugging is turned on for most packages. Within
a package one can use `#ifdef H5AC_DEBUG' to wrap debugging
code. Other options are:
--enable-debug
--enable-debug=yes
The default, most but not all packages.
--disable-debug
--enable-debug=no
--enable-debug=none
The symbol NDEBUG is defined and none of the package
debug symbols.
--enable-debug=all
Debugging is turned on for all packages. This might
produce lots of output.
--enable-debug=g,d
Debugging is turned on for H5G and H5D.
A compile mode is also now supported
--enable-production
--enable-production=yes
The library is compiled with optimizations turned on.
The compiler flags are augmented by adding PROD_CFLAGS
and PROD_CPPFLAGS which are defined in the site config
file.
--disable-production
--enable-production=no
The default. The library is compiled for development
by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in
the site config file. This is usually just `-g'.
--enable-production=profile
--enable-production=pg
Builds a library for profiling by including the flags
from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the
site config file. This is usullay just `-pg' but it
could include optimization flags as well depending on
the type of profile one wants.
In summary, configure by saying `./configure' and you'll get a
development version of the library. Configure by saying
`./configure --enable-production --disable-debug' and you'll
get a production version with no debugging code.
----------------------
./MANIFEST
./src/H5HG.c [new]
./src/H5HGprivate.h [new]
./src/H5HGpublic.h [new]
./src/Makefile.in
Added global heaps, H5HG. This compiles but is untested.
./src/H5D.c
./src/H5G.c
./src/H5Gnode.c
./src/H5Gstab.c
./src/H5HL.c [renamed from H5H.c]
./src/H5HLprivate.h [renamed from H5Hprivate.h]
./src/H5HLpublic.h [renamed from H5Hpublic.h]
./src/H5Oefl.c
./src/Makefile.in
./src/hdf5.h
./test/theap.c
Renamed local heaps from H5H to H5HL.
./src/H5AC.c
./src/H5ACprivate.h
./src/debug.c
Added debugging support for global heap collections.
./html/H5.format.html
Ripped out the old small object heap documentation and added
documentation for the new global heap.
./html/H5.api.html
./src/H5P.c
./src/H5Ppublic.h
./src/H5F.c
./src/H5Fprivate.h
./src/H5private.h
The H5Pget_version() function no longer returns a small object
heap version number. Instead, each collection of the global
heap has its own version number instead of a single number in
the file boot block.
./bin/release
Omit files marked for removal by CVS even though the removal
hasn't been committed yet.
./test/iopipe.c
Removed warnings about casting unsigned int to double on Irix64.
./MANIFEST
Removed ./test/testpar/phdf5sup.c
----------------------
./src/H5D.c
Zero element requests for H5Dread() and H5Dwrite() succeed.
./src/H5F.c
./src/H5Fprivate.h
All files will have a root group. This greatly simplifies the
library at the expense of ~1k extra bytes in files that have
only one object.
./src/H5D.c
./src/H5Dprivate.h
./html/Groups.html
Functions that used to take a file ID and an object name can
now take a group ID instead of a file ID. This doesn't change
the API, only it's documentation.
./src/H5G.c
./src/H5Gprivate.h
./src/H5O.c
./src/H5Oprivate.h
Removed extra file arguments from some internal functions
since the file pointer can be found from the group pointer or
a symbol table entry (ent->file or H5G_fileof(group)).
Besides, when we eventually implement mounting one file on
another, H5G_namei() might return a different file than what
you gave it, and that file is part of the returned symbol
table entry.
./src/H5G.c
Fixed bug with `.' appearing in a name. It used to hang the
library.
./src/Makefile.in
./src/h5ls.c [NEW]
./MANIFEST
Added `h5ls' a simple program that takes a file name and a
directory and lists the contents of that directory using
H5Giterate().
./test/istore.c
Changed an argument to H5G_create().
./test/tstab.c
Removed test_1 which was testing that files with a single
object don't have a root group. This no longer applies.
----------------------
./src/H5B.c
./src/H5Bprivate.h
./src/H5G.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gpublic.h
./src/H5Gstab.c
Implemented H5Giterate(). However, since most functions can't
take a group ID in place of a file ID yet, there's not a whole
lot that the operator can do besides print the name or something.
./test/H5O.c
Fixed writing of four uninitialized bytes to the file as part
of an object header.
./test/istore.c
For some reason, `mpirun -np 1 istore' results in extra
arguments on the command line that istore doesn't understand.
I'm probably forgetting to call some MPI function in
main(). Albert, Kim? So I commented out the `exit(1)' for the
time being.
----------------------
./config/linux
Turned on MPIO if the host name is `arborea' so I always
compile it and realize when I break something instead of
waiting for Albert or Kim to find it.
./MANIFEST
./html/H5.user.html
./html/IOPipe.html [NEW]
./html/pipe1.gif [NEW]
./html/pipe1.obj [NEW]
./html/pipe2.gif [NEW]
./html/pipe2.obj [NEW]
./html/pipe3.gif [NEW]
./html/pipe3.obj [NEW]
./html/pipe4.gif [NEW]
./html/pipe4.obj [NEW]
./html/pipe5.gif [NEW]
./html/pipe5.obj [NEW]
Documented the raw data I/O pipeline.
----------------------
./MANIFEST
./configure.in
./configure
./Makefile.in
./bin/distdep [NEW]
./config/conclude.in
./config/depend.in
./src/.distdep [NEW]
./test/.distdep [NEW]
Added some code so non-GNU systems have a list of dependencies
between the .c files and the .h files. Hopefully this works
and y'all don't have to keep saying `make clean' each time you
change a header.
On systems with GNU make, GCC, and Perl, the dependency
information is generated automatically from rules in
config/depend.in as has always been done. But now extra files
called `.distdep' (for `distributable dependencies) are left
in each directory and these are part of CVS and thus
releases. (A `make dep' will create dependencies on demand
without doing anything else.)
On systems lacking one or more of the tools above, the various
`.distdep' files are inserted into the end of the Makefiles.
If you do developement on one of these systems you'll have to
update the `.distdep' and/or Makefile by hand, or wait until
you have access to a GNU system and do a `make dep'.
----------------------
./MANIFEST
New files
./html/extern1.gif [NEW]
./html/extern1.obj [NEW]
./html/extern2.gif [NEW]
./html/extern2.obj [NEW]
./html/Datasets.html
Documented external raw data storage.
./html/Datasets.html
./html/chunk1.gif [NEW]
./html/chunk1.obj [NEW]
Added a picture and better description for chunking since it
seems that people are thinking chunks are fixed-size at the
file level instead of at the array level.
./src/H5D.c
./src/H5Dpublic.h
./test/external.c
Changed H5Dget_create_parms() to H5Dget_create_plist().
./src/H5D.c
./src/H5Farray.c
./src/H5Fprivate.h
./src/H5Oefl.c
./src/H5Oprivate.h
./src/H5Sprivate.h
./src/H5Ssimp.c
./test/external.c
./test/istore.c
External raw data file I/O for contiguous storage is now
working. The library supports segments of various sizes which
can be scattered throughout multiple files in any order.
./test/Makefile.in
Remove more temporary files.
----------------------
./html/Dataspaces.html
./html/Errors.html
./html/Files.html
./html/H5.api.html
./html/review1.html
./src/H5private.h
./src/H5public.h
./test/dsets.c
./test/dtypes.c
Removed all the types like `int32' and `intn' into private
headers since they violate the naming scheme and pollute
application name space. Besides, our test files only use them
in a handful of places and it's probably useless to export
them to the app. The app is always written in terms of
standard numeric types or its own numeric types and probably
never in terms of HDF5 numeric types. If it were, then the
user would have to copy from their type to hdf5 type for
almost every hdf5 API function call! Same goes for return
values. I also removed SUCCEED/FAIL from the API since apps
should be checking against zero anyway.
if (FAIL==(space=H5Screate_simple(...))) /*wrong*/
if ((space=H5Fcreate_simple(...)<0)) /*right*/
./src/H5.c
Changed arguments of H5version() from `uintn' to `unsigned'.
./src/H5Tpublic.h
./src/H5T.c
Changed return type of H5Tget_nmembers() from `intn' to `int'
./src/H5A.c
./src/H5Aprivate.h
./src/H5Apublic.h
Changed `H5Asearch_func_t' to `H5A_search_func_t' and moved
its definition from the public to the private header file.
./html/H5.format.html
Documented changes made to the external file list (H5O_EFL)
message.
./src/H5D.c
./src/H5Dprivate.h
./src/H5E.c
./src/H5Epublic.h
./src/H5O.c
./src/H5Oefl.c
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
Added partial support for external raw data files. HDF5 can
now describe external raw data files by listing the file
names, offsets, and size for a dataset. However, we will
restrict a dataset to be stored "contiguously" when the
external file list is viewed as a single address space. The
current implementation is unable to read/write to external
files--that will come later this week as will documentation.
For now, take a look at ./test/external.c, particularly the
calls to H5Pset_external().
./test/Makefile.in
./test/external.c [NEW]
./MANIFEST
Added tests for external storage. Note: the read test is
supposed to fail at this point since reading external datasets
is not implemented yet. There is no write test.
./src/H5S.c
./src/H5Sprivate.h
./src/H5Ssimp.c
Added H5S_get_npoints_max() to return the maximum possible
number of data points in a data space.
Added an extra argument to H5S_get_dims() which returns the
maximum dims.
./src/H5F.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5M.c [DEPRICATED]
./src/H5Mpublic.h [DEPRICATED]
Changed `template' to `property list' in lots of places.
./src/H5Osdspace.c
Removed an extra `\n' from a print statement.
./src/H5S_public.h
Changed H5S_UNLIMITED to the maximum size_t value.
./test/extend.c
"Extendable" is spelled "extendible".
./src/H5Farray.c
./src/H5V.c
./src/H5Vprivate.h
./test/hyperslab.c
Strides are now type ssize_t instead of int. These have
nothing to do with the sample granularity arguments for
hyperslabs, which are also called "strides" in the code.
./test/tstab.c
Changed assumptions about default address and length sizes.
----------------------
./html/Errors.html [NEW]
./html/H5.user.html
./MANIFEST
Documents the new error handling interface and gives examples.
./src/H5.c
./src/H5private.h
./src/H5Apublic.h
./src/H5E.c
./src/H5Eprivate.h
./src/H5Epublic.h
Rewrote error handling. Got rid of `push' overloading and
added a few API functions. The error stack is statically
allocated and not entered into H5A, simplifying error handling
within the error handler. Rudimentary support for threads.
Changed the names of some errors.
./src/H5G.c
./src/H5Gnode.c
./src/H5H.c
./src/H5O.c
./src/H5T.c
Changed H5ECLEAR to H5E_clear().
./src/Makefile.in
Alphabetized source list.
./test/dsets.c
Turned off error reporting around functions that are expected
to fail. Error messages are sent to stdout.
./test/testhdf5.c
./test/testhdf5.h
Turned off automatic error reporting since this file mostly
calls internal functions and does its own error reporting.
----------------------
./MANIFEST
Added H5Fmpio.c. One way to check that you've properly
included new files is to run `./bin/release none', then unpack
the resulting tar file somewhere and try to compile it. The
tar file will be ./releases/hdf-5.0.0a.tar.
./config/freebsd2.2.1
./config/linux
Added `-ansi'
./acconfig.h
Added definitions for PHDF5 and HAVE_PARALLEL.
./configure.in
Added minimal support for parallel build. Kim and Albert will
have to flesh this out or I can do it if they're more specific
about what they need.
./config/commence.in
Added default value for $(RUNTEST)
./config/conclude.in
`make test' uses value of $(RUNTEST) to run test cases.
./src/Makefile.in
Added PARALLEL_SRC for conditional compilation of H5Fmpio.c
./src/H5D.c
./src/H5Dpublic.h
Added H5Dget_type() for Elena
NOTE: These changes require that configure be rerun. If you're using
GNU make it will happen automatically, otherwise do it by
hand.
----------------------
./MANIFEST
./html/study.html [NEW]
./html/study_1000x1000.gif [NEW]
./html/study_250x250.gif [NEW]
./html/study_499x499.gif [NEW]
./html/study_5000x1000.gif [NEW]
./html/study_500x500.gif [NEW]
./html/study_p1.gif [NEW]
./html/study_p1.obj [NEW]
The conclusions from a study of the HDF5 chunking
layout. Shows overhead and disk seeking.
----------------------
./INSTALL
Added instructions for which C flags to set for debugging.
./src/H5C.c
./src/H5Cpublic.h
H5Cset_chunk() takes const pointer.
./src/H5D.c
./src/H5Dprivate.h
./src/H5Dpublic.h
Added H5Dextend() to extend the dimensions of a dataset.
./src/H5Osdspace.c
./src/H5P.c
./src/H5Pprivate.h
./src/H5Ppublic.h
./test/cmpd_dset.c
./test/dsets.c
./test/th5p.c
Added the optional `maxdims' argument to H5Pcreate_simple()
and defined constant H5P_UNLIMITED which can appear in the
maxdims. Added `const' to arguments.
Implemented H5Pcopy()
Removed the unused file argument from H5P_modify.
Added H5P_extend().
Removed the `flags' field from simple data types and we
determine if the `max' or `perm' arrays are valid by looking
at the pointer. Cleaned up the H5O_sdspace_debug output.
./src/H5T.c
Fixed a printf format.
./MANIFEST
./test/Makefile.in
./test/extend.c [NEW]
Added a test for multi-dimensional unlimited dimensions.
----------------------
./MANIFEST
Added new files.
./bin/Makefile.dist [NEW]
This file becomes the default top-level Makefile which invokes
configure with no arguments and then re-runs make. It's for
those people that don't read the INSTALL file.
./bin/release [NEW]
Build HDF release tarballs. Arguments are a list of tarball
types and are: tar, compress, gzip, or bzip2. The default is
gzip. If the only argument is `all' then all types of tarballs
are created. The results are put in the `releases' directory.
Make sure you keep MANIFEST up to date. This program requires
perl-5.003 or better.
./src/H5AC.c
Fixed a printf format.
----------------------
./MANIFEST
Added new config files.
./src/H5private.h
Changed FUNC_ENTER() so it calls H5Eclear() for all API
functions but not for any private functions. It also prints
the names of all API functions on file 55 (just for the
prototype) so we can get a list of API functions called with
the Bourne shell commands like:
./testhdf5 55>api_list or
./testhdf5 55>&1 1>/dev/null 2>&1 | less
Otherwise the names are silently discarded.
./src/H5.c
./src/H5C.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5M.c
./src/H5P.c
./src/H5T.c
Removed `H5ECLEAR' from lots of places in the source code.
./src/H5E.c
./src/H5Eprivate.h
Recursion is a problem here, so to disable a call to
H5Eclear() from FUNC_ENTER just define a local variable like
this before you call FUNC_ENTER:
const H5E_clearable_g = FALSE;
Unfortunately this results in a warning: declaration of
`H5E_clearable_g' shadows global declaration. Good thing it's
only used in two places.
----------------------
./MANIFEST
Added new files.
./config/linux
Added `-pipe' to the default GCC flags since this is supposed
to result in better performance on a multi-processor machine.
./html/Datasets.html
./html/dataset_p1.gif [NEW]
./html/dataset_p1.obj [NEW]
Updated to match source. The things which aren't part of the
Feb-1 prototype are marked in bold. Added an example for
partial I/O.
./html/Groups.html [NEW]
./html/group_p1.gif [NEW]
./html/group_p1.obj [NEW]
./html/group_p2.gif [NEW]
./html/group_p2.obj [NEW]
./html/group_p3.gif [NEW]
./html/group_p3.obj [NEW]
New documentation for groups.
./html/H5.sample_code.html
Updated two examples to match code.
----------------------
./MANIFEST
Added new files.
./src/H5D.c
Added support for partial datatype I/O which is needed when
merging struct members between file and disk. This isn't the
efficient version because the merge requires an extra gather
(step 1b in my pipeline diagram) that isn't turned off when it
isn't needed.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
Conversion functions take an extra argument which is a pointer
to a blob of private data that can be used by the conversion
function to save anything that's expensive to compute and
is constant for a particular conversion path.
./src/H5Tconv.c
Compound data type conversion is beginning to work! We can
handle conversions between compound types that have members
which are not arrays. It also supports partial conversion so
we can omit certain members of the source and not clobber
extra members in the destination.
./test/Makefile.in
./test/cmpd_dset.c [NEW]
Added a test case that demonstrates how to use compound data
types in a dataset. The output doesn't match the output of
the other test cases yet, the the entire example is more
readable and written entirely with the API.
----------------------
./MANIFEST
./src/H5Psimp.c [NEW]
./src/Makefile.in
Added H5Psimp.c and populated it with some conversion
functions. Eventually the parts of H5P.c that operate on
simple data spaces will be migrated to H5Psimp.c and other
files will be created for other types of data spaces.
./src/H5D.c
The read pipeline, H5Dread(), has been updated to handle data
space conversion although the actual simple data space
conversion functions don't do anything yet. But we're getting
really close!
./src/H5P.c
./src/H5Pprivate.h
Added H5P_find() to locate data space conversion functions.
Added typedefs for structs related to data space conversion.
----------------------
./html/Datasets.html
Removed some archaic comments about data spaces. Fixed example
code.
./MANIFEST
./html/H5.format.html
./src/H5O.c
./src/H5Oprivate.h
./src/H5Ocstore.c [DELETED]
./src/H5Oistore.c [DELETED]
./src/H5Olayout.c [NEW]
./src/Makefile.in
./test/istore.c
Replaced H5O_CSTORE and H5O_ISTORE messages with a more
general H5O_LAYOUT message.
./src/H5D.c
./src/H5Dprivate.h
./src/H5Dpublic.h
A little more work on the pipeline. Access to the file data
is through the new H5F_arr_read() and H5F_arr_write() which do
I/O on hyperslabs of byte arrays and don't depend on data
layout. This should simplify the I/O pipeline quite a bit.
I also added another argument to H5Dread() and H5Dwrite() to
describe the hyerslab of the file array on which I/O is
occuring. We discussed this at last week's meeting.
./src/H5Farray.c [NEW]
Added functions that sit on top of H5F_block_read() and
H5F_istore_read() and implement a common set of functions
between all layouts. This means I/O of hyperslabs of
byte-arrays in the file to arrays of bytes in memory. When
operating on arrays of elements (>1byte) then we just add
another dimension. That is, a 10x20 array of int32 becomes a
10x20x4 array of bytes.
[This is the area I'll be working on most of next week to
implement partial I/O for contiguous data and to improve
performance for chunked data.]
./src/H5Fistore.c
./src/H5Fprivate.h
Replaced the H5F_istore_t data type with the layout message
H5O_layout_t which looks almost the same. Eventually I'd like
to rename `istore' to `chunked' everywhere and use `istore'
for 1-d storage where the chunks are all different sizes like
in the small object heap where each object is a chunk.
./src/H5V.c
Changed ISTORE to LAYOUT in one place.
./test/dsets.c
Fixed for extra argument to H5Dread() and H5Dwrite().
----------------------
./MANIFEST
./src/H5Dconv.c [REMOVED]
./src/H5Tconv.c [NEW]
./src/Makefile.in
Changed H5Dconv.c to H5Tconv.c
./html/Datatypes.html
Updated data type conversion section.
./html/H5.apiv2.html
Removed sections about datasets and data types since they're
covered in their own chapters.
./src/H5D.c
Supports data type conversion.
./src/H5Odtype.c
./src/H5Tpkg.h
Changed `lo_pad' and `hi_pad' to `lsb_pad' and `msb_pad'.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
./src/H5detect.c
Added predefined data types. Added query/set more
properties. Added type conversion infrastructure.
./test/dsets.c
Tests data type conversion during read.
----------------------
./src/H5private.h
Changed HDF5_MAJOR_VERSION to 5
./src/H5Aprivate.h
./src/H5Apublic.h
Added group atoms.
./src/H5D.c
./src/H5P.c
./test/istore.c
./test/tohdr.c
./test/tstab.c
Updated for symbol table interface changes.
./src/H5F.c
./src/H5Fprivate.h
Simpler handling of special case files: empty files and files
with a single object.
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gpublic.h
./src/H5Gshad.c (DELETED)
./src/H5Gstab.c
./src/Makefile.in
Removed shadows, simplifying code. Symbol table entries are
allowed to cache only constant meta data. Fixed naming.
./src/H5O.c
./src/H5Oprivate.h
Access to object headers is always done through a symbol table
entry instead of a file address. Added stubs for opening and
closing object headers to be used when deletion is implemented.
./src/Makefile.in
Added H5Ffamily.c and H5Fsplit.c
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
Added `const' to sublass arguments.
./src/H5F.c
./src/H5Flow.c
./src/H5Fsec2.c
Make sure file buffers get flushed during a call to
H5Fflush(). Check for overflow in address encoding and decoding.
./src/H5Ffam.c
./src/H5Fprivate.c
./test/istore.c
Implementation of file families so 32-bit machines can access
64-bit files.
./src/H5Oprivate.h
Removed H5O_NO_ADDR constant.
./config/freebsd2.2.1
./config/linux
Added -DH5G_DEBUG and -DH5F_DEBUG to the list of debugging flags.
./html/H5.format.html
Changed some <offset>-sized things to <length>-sized things.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5B.c
./src/H5Bprivate.h
./src/H5C.c
./src/H5D.c
./src/H5F.c
./src/H5Fcore.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gshad.c
./src/H5Gstab.c
./src/H5H.c
./src/H5Hprivate.h
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
./src/H5Ocont.c
./src/H5Oistore.c
./src/H5Oprivate.h
./src/H5Ostab.c
./src/H5Ostdst.c
./src/H5pivate.h
./src/debug.c
./test/istore.c
./test/theap.c
./test/tohdr.c
./test/tstab.c
Lots of changes caused by generalizing addresses. The haddr_t
is now a struct, so you can no longer perform arithmetic on
it. But since it's small, simple, and often used, storage is
allocated like with an integer. But we always pass them
around by reference. That is, when using an address in
another struct, allocate space:
struct my_struct {
char *name;
haddr_t address;
} x;
But when passing it to a function, pass by reference:
H5F_addr_print (stderr, &(x.address));
Addresses should be initialized with
H5F_addr_undef (&(x.address));
Functions for operating on addresses are in H5Flow.c and begin
with H5F_addr_... Functions never return haddr_t or haddr_t*;
they always pass them through arguments instead. A function
that returns an address through an argument does so with its
last argument and it is marked with `/*out*/'. Calls to such
functions also mark output-only arguments with `/*out*/'
./src/H5Fsplit.c (new)
A two-member family where all meta data goes in the first
member and all raw data goes in the second member.
./src/H5B.c
./src/H5D.c
./src/H5F.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5Gnode.c
./src/H5H.c
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
Differentiate between meta data storage and raw data
storage. Provide a mechanism so that the file driver can
extend the file to allocate more memory.
./src/H5E.c
./src/H5Epublic.c
Added the error H5E_TRUNCATED to be reported when the file is
shorter than the length recorded in the boot block.
./src/H5F.c
Added H5F_locate_signature() so we only do it in one place
now.
./INSTALL
./INSTALL_MAINT
Just a couple clarifications.
./html/ExternalFiles.html
./html/storage.html
Documents how external files work.
./test/hyperslab.c
./test/istore.c
Fixed printf's on 64-bit machines.
./test/istore.c
Added ifdef's to test the split file driver.
./config/freebsd2.2.1
Rewritten to be more flexible.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5F.c
./src/H5H.c
./src/H5Gpkg.h
./src/H5Gshad.c
./src/H5O.c
./test/istore.c
./test/tstab.c
Accumulates cache statistics and displays the results on
stderr when the file is closed if it was opened with
H5F_ACC_DEBUG passed into H5F_open()
./src/H5B.c
./src/H5Bprivate.h
./src/H5Fistore.c
./src/H5Gnode.c
Added more debugging which is turned on if H5B_DEBUG is
defined on the compile command (see config/linux).
Fixed a couple of bugs with left insertions which are used by
the indexed storage stuff.
./src/H5Flow.c
Fixed a memory leak.
./src/H5Fprivate.h
Fixed warnings about shifting more than size of object.
./src/H5Fstdio.c
Fixed seek optimizations back to the way Quincey originally
had them.
./src/H5V.c
Removed unused variables.
./src/Makefile.in
Added new files.
./html/H5.apiv2.html
Added documentation for group stuff.
./src/H5private.h
./src/H5E.c
./src/H5Epublic.h
./src/H5F.c
./src/H5Flow.c NEW
./src/H5Fprivate.h
./src/H5Fsec2.c NEW
./src/H5Fstdio.c NEW
Low-level file driver is selected at runtime.
./src/H5Fprivate.h
Got rid of `shift >= sizeof operand' warnings on big endian
machines.
./src/H5Fistore.c
./test/istore.c
Still working on indexed storage...
./src/H5H.c
./src/H5Hprivate.h
Removed alignment constraints.
----------------------
./config/depend.in
Fixed backslashes in sed script because the H5Gnode.c
dependency info was disappearing. You'll have to rerun
config.status to rebuild the Makefiles unless you use gnu
make.
./config/conclude.in
Also removes emacs backup files, TAGS, and svf backup files.
./config/linux
Grouped gcc flags and added provisions for debugging vs. production.
./html/H5.format.html
Updated messages 0x0008, 0x0009, and 0x000A.
./html/storage.html
Documentation describing storage schemes.
./src/Makefile.in
./test/Makefile.in
New source files.
./src/H5A.c
./src/H5Apublic.h
./src/H5C.c
Changed VOIDP to void* in a couple places.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5B.c
./src/H5Bprivate.h
./src/H5G.c
./src/H5Gnode.c
./src/H5Gprivate.h
./src/H5H.c
./src/H5O.c
Removed `const' from some variables because H5G_node_found() wanted
to modify it's udata argument. Removing const there caused it
to cascade to these other locations.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5B.c
./src/H5Gnode.c
./src/H5Gstab.c
./src/H5H.c
./src/H5O.c
Added an extra argument to H5AC_find_f() and H5AC_protect(). This
arg gets passed to the load() method. Also added an extra
argument to the H5AC_find() macro.
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
Extra argument passed to the sizeof_rkey() method.
./src/H5Fprivate.c
./src/H5Fistore.c (new)
Added indexed I/O operations.
./src/H5G.c
./src/H5Gnode.c
./src/H5Gprivate.h
Beginning to add H5G_open/close and related bug fixes.
./src/H5Oprivate.h
./src/H5Oistore.c (new)
Added the H5O_ISTORE messsage (0x0008) for indexed storage of
objects.
./src/H5private.h
Added extra braces around both sides of the FUNC_ENTER() and
FUNC_LEAVE() macros so FUNC_ENTER() can appear before
declarations or after executable statements the second case is
used by H5G_namei() to initialize output arguments to sane
values before FUNC_ENTER() might return failure.
int f ()
{
int decl1;
printf ("This happens before FUNC_ENTER()\n");
FUNC_ENTER (...);
int another_declaration;
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
Extra arguments for key encoding and decoding.
./src/H5E.c
./src/H5Epublic.h
./src/H5Fistore.c
./src/H5Oistore.c
./src/H5Oprivate.h
Indexed, chunked, sparse storage (not ready for general consumption
yet).
./src/H5V.c (new)
./src/H5Vprivate.h (new)
./test/hyperslab.c (new)
Vector, array, and hyperslab functions.
./src/H5B.c
./src/H5Bprivate.h
./src/H5Fistore.c
./src/H5Gnode.c
./src/H5V.c
./src/H5Vprivate.h
./test/hyperslab.c
Added functionality for indexed storage.
./src/H5F.c
Fixed problems with seek optimizing. Recommend we disable it
until we can implement it in the file/address class since all
of HDF5 must be aware of it.
./src/H5O.c
Fixed comeent speling erorr :-)
./MANIFEST
Added new files.
./config/conclude.in
Added the word `Testing' to the test cases. So if a test
program is called hyperslab then the make output will contain
the line `Testing hyperslab'.
./config/linux
The default file I/O library is Posix section 2 on my linux
machine so I can do some I/O performance testing.
./src/H5C.c
./src/H5Cprivate.h
./src/H5Cpublic.h
Added ability to set size of indexed-storage B-tree.
./src/H5D.c
./src/H5E.c
./src/H5Epublic.h
./src/H5F.c
./src/H5Fprivate.h
./src/H5G.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gpublic.h
./src/H5Gshad.c
./src/H5Gstab.c
./test/stab.c
Changed `directory' to `group' in numerous places.
./src/H5private.h
The FILELIB constant can be set on the compile command-line.
./src/istore.c NEW
Tests for indexed storage.
Instructions for end users.
./INSTALL_MAINT NEW
Instructions and hints for maintainers.
./MANIFEST NEW
A list of names of files that are part of the HDF5
distribution.
./Makefile.in NEW
Top-level makefile template. See INSTALL and/or INSTALL_MAINT
for instructions on how to generate the Makefile from this
file.
./configure NEW
./configure.in NEW
Configuration shell script generated from configure.in.
./Makefile
Removed from CVS. This file is now generated by running
configure.
