Improve configure's large-file support control.
Description:
Modified configure to now attempt to add defines necessary for
supporting largefiles on all systems, instead of solely on linux. This
is in response to user requests to enable largefile support on Solaris
by default, as well as to give extra control on AIX (instead of just
jamming the necessary flag into the config files).
The old --enable-linux-lfs flag has been removed in favor of the
--enable-largefile flag (enabled by default), which can be used on all
platforms.
On systems where large files cannot be supported in this manner,
configure will report as such.
Tested:
h5committest
AIX (NCSA's blue_print machine)
duty, liberty, and linew.
Autotool Upgrade / Libtool Bug Fix
Description:
Updated autotools referenced in bin/reconfigure as follows:
Autoconf 2.64 --> Autoconf 2.65
Automake 1.11 --> Automake 1.11.1
Libtool 2.2.6a --> Libtool 2.2.6b-mcg
The referenced libtool version is a custom version of 2.2.6b. It
has been tweaked to fix a bug in libtool that occurs
when using PGI 10.0 compilers. A check incorrectly categorizes
the C++ compiler as version 1.0 instead of 10.0, and the link
line is subsequently set up incorrectly and fails to compile.
A patch has been made available and will be included in the next
release of libtool, but in the meantime I've applied the patch to a custom
installation as indicated above. This bin/reconfigure now references
the custom installation, and the resulting configure script will correctly
categorize the PGI 10.0 C++ compiler.
Ran bin/reconfigure to regenerate configure and makefiles.
Tested:
jam and amani with PGI 10.0 compilers.
h5committest
The mixed use of RUNTEST (original) and RUNTESTS (new) caused
confusion. E.g., the timings in test/ was still using the old
$RUNTEST. It made more sense to use $RUNTEST which is used
by the dejagnu feature of automake. So, I changed all
$RUNTEST or $RUNTESTS to $RUNEXEC.
config/commence.am & config/conclude.am are the two files
that got changes. Also fixed an error in test/Makefile.am.
The rest are changed by bin/reconfigure.
Tested: h5committested.
Tests to verify the bug fixed are installed.
Test: v1.8.4 passed all tests on
Jam (default and with --disable-depreacted-symbol), Amani (v16API),
Linew (default).
This should be good for trunk version too.
The error started out as an erroneous test of using v16 API via
source code. (See bug 1264). It was implemented as:
#include "hdf5.h"
#define H5_USE_16_API
That was incorrect and generated warnings in Linux but error in AIX
for redefining macro H5_USE_16_API.
I corrected it yesterday to pass AIX by moving H5_USE_16_API up as:
#define H5_USE_16_API
#include "hdf5.h"
This is the proper way to turn on v16API and it passes all normal
tests. I knew it would not work if somehow v16API is disabled
but hoping it can be fixed later. Well, it broke last night
under --disable-deprecated-symbols.
Removed the #define H5_USE_16_API and let Raymond fix it after
the release.
#define H5_USE_16_API
was inserted AFTER #include <hdf5.>, too late was it to take
effect. Instead, it caused a macro redefinition, flagged as an error
by AIX.
Fixed by moving it before the <hdf5.h>.
Tested: Jam.
CFLAGS overhaul
Description:
Modified the way configure handles CFLAGS.
(note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS).
1. The configure process will now always preserve a user's CFLAGS
environment variable setup. Any additional flags necessary for compilation
added at configure time will be passed into the Makefiles as AM_CFLAGS,
which is an automake construct to be used in addition to CFLAGS.
This will allow a user to have the final say, as CFLAGS will always appear
later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS
during make will no longer completely erase all flags set by configure,
since they're maintained in AM_CFLAGS.
2. Additionally, where possible, flags previously being assigned directly
into CFLAGS (and thus propagating into h5cc) have now been redirected into
H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into
the h5cc wrapper script as well.
*Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the
Makefiles. Complete description of changes and build process will be
included in a Configure Document that Elena and I are working on.
3. Removed unsupported config files. This includes:
config/dec-osf*
config/hpux11.00
config/irix5.x
config/powerpc-ibm-aix4.x
config/rs6000-ibm-aix5.x
config/unicos*
4. Modified configure summary to display additional values. Specifically,
appropriate AM_* variables are being shown, as well as H5_FCFLAGS and
H5_CXXFLAGS, which were for some reason not already present.
Tested:
- H5committest
- Tested on all THG / NCSA machines, using several combinations of the more
prominent configure options (c++, fortran, szip, threadsafe, parallel,
et cetera). (Thanks to Quincey for rysnc testing setup!)
- With regards to new automated testing, anything *necessary* for
compilation will be caught by the daily tests as it stands now. (i.e.,
if LDFLAGS is not properly set when szip is used, linking will fail).
Additionally, with regards to which flags get into h5cc, if any
*necessary* flags have been improperly removed, then daily tests should
fail during make installcheck. Additional machine-specific desired
behaviors and/or checks may have to be set up separately within the
daily tests, so this is something to work on.
Updating autotools
Description:
Installed new autotools and used them to reconfigure HDF5.
- Automake upgraded to 1.11
- Autoconf upgraded to 2.64
- bin/reconfigure script edited to use new versions (on jam), and
run to generate new configure script and Makefile.in's.
- configure.in script edited to add "_cv_" to all AC_CACHE_VAL strings
(in order to comply with new autoconf standard).
Tested:
Tested on machines jam, smirom, liberty, linew.
Tested w/ features c++, fortran, parallel.
Tested w/ compilers gcc, pgcc, icc.
Further testing via Daily Tests should catch any other outliers. Upon
passing DT's, I'll propogate the new tools into 1.8, hdf4, et cetera.
Tweak down the size of datatype created for dataset, so that the
elements are a reasonable size and the dataset's size can fit into a 64-bit
value for storing in the file.
Tested on:
FreeBSD/64 6.3 (liberty)
(too minor for h5committest)
If the AR command has embedded shell separators such as the case of
"AR = ar -X 64", $AR ends up as a blank.
Solution:
Put quotes around the command substitution string to protect against embedded
separators. Applied the same to both AR and RANLIB assignments.
Tested:
At Up (AIX 5.3) only because that was where I discovered the error
when AR is ar -X 64
- Updated bin/reconfigure to use latest version of automake (1.10.2).
Re-generated Makefile.in's by running bin/reconfigure.
- Added libtool version numbers to c++, fortran, hl, hl c++, and hl fortran
libraries.
Tested:
jam, liberty, smirom
Bug Fix
Description:
Fixing BZ #1381. The --includedir=DIR configure option, which is used
to specify the installation location of C header files, did not work
correctly as the path was hard-coded in config/commence.am. I'm presuming
this is because an older version of automake didn't know where to put
c header files. In any case, removing this line now defaults the includedir
to the same directory that it is currently hard-coded to, and also fixes
the configure flag to allow customization of this value.
Tested:
jam, liberty
Remove another call to H5E_clear_stack() from within the library.
Clean up lots of compiler warnings.
Tested on:
Mac OS X/32 10.5.6 (amazon)
(followup on other platforms forthcoming)
the way h5ls prints types, it starts searching for NATIVE types first. One solution would be h5ls not to detect these native types, using for example the same print datatype function that h5dump does, that would make the output look the same on all platforms ("32-bit little-endian integer" would be printed instead). Drawback, this "native" information would not be available. Other solution is to have not one but 2 expected outputs and make the shell script detect the endianess and compare with one output or other
tested: h5committest
check whether the macros H5_USE_16_API works properly. There used to be a problem to compile
if H5_USE_16_API is defined in the application program (see bug #1264).
Tested on kagiso - simple change.
th user's definition of H5_USE_16_API. The H5_USE_16_API_DEFAULT is defined through
configure with the flag --with-default-api-version=v16.
Tested with h5committest.
Description:
- Remove need to set LD_LIBRARY_PATH when using shared szip library.
- Libtool 2.2.6a is now used to generate libraries.
- 'make check install' dependency bug is fixed, and should no longer
break the build.
- removed hard coding of shell in config/commence.am, as this causes
problems on Solaris with the new version of libtool.
- RELEASE.txt with appropriate changes.
Tested:
- kagiso, smirom, linew (merged from 1.8, pretty quick tests)
Remove trailing whitespace from C/C++ source files, with the following
script:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Tested on:
Mac OS X/32 10.5.5 (amazon)
No need for h5committest, just whitespace changes...
Description:
The fortran Makefile.am used HDF_FORTRAN to indicate it is part of the
Fortran API source so that conclude.am will give fortran api prefix in the
test output. The symbox HDF_FORTRAN is also used in configure for a different
purpose (indicated --enable-fortran). They conflicted.
Similar problem for the symbol HDF_CXX.
Solution:
Changed all the involved Makefile.am to use "FORTRAN_API" instead. It is
a more appropriate name. Same for CXX_API.
Along the way, discovered that the Makefile.am of hl/fortran/test and
hl/cxx/test did not have those symbols at all. Added them in.
Platform tested:
Kagiso only. It is a trivia change.
Improvement.
Description:
src/libhdf5.settings was the initial configure summary and is installed.
Then configure is changed to dump a summary of the configure settings to
the output and also append it to src/libhdf5.settings. That created
two different output formats and duplicated information. This is the
initial attempt to clean up this confusion and unify the output format.
It is decided to use the src/libhdf5.settings template as the unified means.
This requires more macros symbols be defined. The following symbols are
all related to generating the src/libhdf5.settings file.
AC_SUBST(EXTERNAL_FILTERS)
AC_SUBST(MPE) MPE=no
AC_SUBST(STATIC_EXEC) STATIC_EXEC=no
AC_SUBST(HDF_FORTRAN) HDF_FORTRAN=no
AC_SUBST(FC) HDF_FORTRAN=no
AC_SUBST(HDF_CXX) HDF_CXX=no
AC_SUBST(CXX) HDF_CXX=no
AC_SUBST(HDF5_HL) HDF5_HL=yes
AC_SUBST(GPFS) GPFS=no
AC_SUBST(LINUX_LFS) LINUX_LFS=no
AC_SUBST(INSTRUMENT) INSTRUMENT=no
AC_SUBST(CODESTACK) CODESTACK=no
AC_SUBST(HAVE_DMALLOC) HAVE_DMALLOC=no
AC_SUBST(DIRECT_VFD) DIRECT_VFD=no
AC_SUBST(THREADSAFE) THREADSAFE=no
AC_SUBST(STATIC_SHARED)
AC_SUBST(enable_shared)
AC_SUBST(enable_static)
AC_SUBST(UNAME_INFO) UNAME_INFO=`uname -a`
The src/libhdf5.settings.in has CONDITIONAL's added to it too. The
untrue conditions turned into a "#" and these lines are cleaned by the
post processing script.
Platform tested:
h5committest on kagiso, smirom and linew.
Description: Applying update to autotools that was applied to 1.8 a couple
of weeks ago to the trunk.
Updated bin/reconfigure script to reflect the new versions of
libtool and automake in the /home1/packages/ directory.
Rearranged configure.in script. When using libtool 2.2.2, the
libtool script doesn't generate until later in the configuration
process, so I had to move a test that parsed through the libtool
script to a point after where it was actually being generated.
Ran libtoolize on the project, and ran bin/reconfigure to
regenerate configure and Makefile.in's throughout.
Tested: kagiso, smirom, linew (h5committest)
Correct the prototype for H5Sselect_elements() to take an 'hsize_t *' for
the coordinates, instead of 'hsize_t **'.
Tested on:
Mac OS X/32 10.5.1 (amazon)
Add work-around to allow reading files that were produced with a buggy
earlier version of the library, which could create objects with the wrong
object header message count. There is now a configure flag
"--enable-strict-format-checks" which triggers a failure on reading a file
with this sort of corruption (when enabled) and allows the object to be read
(when disabled). The default value for the "strict-format-checks" flag is
yes when the "debug" flag is enabled and no when the "debug" flag is disabled.
Note that if strict format checks are disabled (allowing objects with
this particular kind of corruption to be read) and the file is opened with
write access, the library will re-write the object header for the corrupt
object with the correct # of object header messages.
This closes bugzilla bug #1010.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
Corrected a compiler warning in the local heap code.
Fixed the shared message flag symbols from the recent switchover.
Tested on:
FreeBSD 6.2/32 (duty)
Change H5Oget_info -> H5Oget_info_by_name and re-add H5Oget_info in a
simpler form for querying a particular object, to align with other new API
routines.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Change H5Literate -> H5Literate_by_name and add simpler form of
H5Literate, to bring this routine into alignment with the other new API
routines.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Change existing H5Gget_info -> H5Gget_info_by_name and add new version
of H5Gget_info, with simpler parameters, to better match new API routines.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Change H5Aiterate2 -> H5Aiterate_by_name to be more consistent with
other new API routine names
Re-add H5Aiterate2, to operate on a particular object
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Changed H5Acreate2 -> H5Acreate_by_name, to be more consistent with
other new API routines.
Re-added simpler form of H5Acreate2, which creates attributes directly
on an object.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Change H5Aopen -> H5Aopen_by_name, in order to be more consistent with
other new API routines.
Re-add H5Aopen as a simpler routine, to open attributes on a particular
object. (Much like the old H5Aopen_name routine).
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Make H5Tarray_create() and H5Tget_array_dims() versioned, and drop the
"perm" parameter from the '2' versions.
Shift internal library usage to '2' versions.
Add simple regression tests for '1' versions.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Move H5Pinsert() out of old "compat v1.6" section and into API
versioning, switching internal usage to H5Pinsert2().
Add regression test for H5Pinsert1()
Clean up some other minor warnings.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Make H5Dopen versioned and change all internal usage to use H5Dopen2
Add simple regression test for H5Dopen1
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Deprecate H5Dextend in favor of H5Dset_extent (without using API
versioning, due to changed behavior) and switch internal usage to H5Dset_extent
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Put H5Acreate() under API versioning, with all internal usage shifted
to H5Acreate2().
Add regression tests for H5Acreate1().
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Move H5Aopen_name() routine to deprecated symbol section and replace
internal usage with H5Aopen().
Add simple regression test for H5Aopen_name() to deprecated routine
test.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Make H5Aiterate() versioned and change all internal use to H5Aiterate2()
Leave some regression tests that exercise H5Aiterate1()
Fix attribute display in h5dump & h5ls to be "by name" by default
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Add H5Rget_obj_type() to the API versioning and switch internal
routines to use H5Rget_obj_type2()
Misc. other code cleanups, etc.
Tested on:
FreeBSD/32 6.2 (duty)
FreeBSD/64 6.2 (liberty)
Linux/32 2.6 (kagiso)
Linux/64 2.6 (smirom)
AIX/32 5.3 (copper)
Solaris/32 2.10 (linew)
Mac OS X/32 10.4.10 (amazon)
Move H5Giterate() and H5G_iterate_t to deprecated symbols section,
replacing them with H5Literate and H5L_iterate_t respectively.
Tested on:
FreeBSD/32 6.2 (duty)
FreeBSD/64 6.2 (liberty)
Linux/32 2.6 (kagiso)
Linux/64 2.6 (smirom)
AIX/32 5.3 (copper)
Solaris/32 5.10 (linew)
Mac OS X/32 10.4.10 (amazon)
Remove all plain calls to H5Gopen() from source, replacing them with
either H5Gopen2().
Add test for H5Gopen1().
Reformatted several pieces of code, to clean them up.
Tested on:
FreeBSD/32 6.2 (duty)
FreeBSD/64 6.2 (liberty)
Linux/32 2.6 (kagiso)
Linux/64 2.6 (smirom)
Solaris/32 5.10 (linew)
Mac OS X/32 10.4.10 (amazon)
Pursue calls to H5Gcreate() relentlessly and ruthlessly exterminate
them, leaving only a few tame specimens in text files and comments. ;-)
Tested on:
Mac OS X/32 10.4.10 (amazon)
FreeBSD/32 6.2 (duty)
FreeBSD/64 6.2 (liberty)
Linux/32 2.6 (kagiso)
Linux/64 2.6 (smirom)
Solaris/32 5.10 (linew)
Add --enable-deprecated-symbols configure option, to allow users to
remove deprecated public API symbols at configure time.
Add bin/make_vers script to bin/reconfigure actions.
Run bin/reconfigure to regenerate autotool components.
Tested on:
Mac OS X/32 10.4.10 (amazon)
FreeBSD/32 6.2 (duty)
Linux/32 2.6 (kagiso)
Bug fix.
Description:
It used to clean out all *.h5 when done but this could cause a racing
condition error if parallel make (e.g., gmake -j ...) is used because
the "rm ... *.h5 ..." would remove *.h5 generaged and are still used
by other test programs (e.g. h5_write/h5_read).
Solution:
Removed "*.h5" from the cleanup list since the test program has already
taken care of removing temporary *.h5 generated.
Tested platform:
Kagiso, both serial and parallel. Not triple platforms tested since
this is just a simple shell script change.
2) Removing configuration of c++/src/H5cxx_pubconf.h file.
Reasoning: the additional pubconf file caused compilation complications, this is cleaner.
Tested: kagiso, smirom
Description: added new configuration to generate a pubconf file
in the c++/src directory, H5cxx_pubconf.h. When C++
compiler recognizes 'offsetof', the macro
H5_CXX_HAVE_OFFSETOF is defined in the new
pubconf file.
tested: kagiso, smirom
Description: a new configure flag has been created that will now set a macro
in the test/Makefile. The flag is with-default-vfd=. When set to
a virtual file driver (e.g. "--with-default-vfd=sec2"), the macro
DEFAULT_VFD will hold this value.
Tested: kagiso, smirom, linew
file size from MPI_File_get_size. Bypass this problem by replacing it with
stat. Add an option --disable-mpi-size in configure to indicate this function
doesn't work properly. Add a test in testpar/t_mpi.c, too. If it returns wrong
file size, print out a warning.
Tested on kagiso (parallel) because already tested the same change to v1.6 on
several platforms (kagiso, cobalt, copper, and sol).
The test scripts did not take in account that the binary has been installed
somewhere other than the original prefix. Added a provision to allow
explicit definition of $prefix to work.
Tested:
kagiso.
Most fortran compilers do not support the Preprocessing -E option. Removed
the tests for preprocessing only.
examples/testh5cc.sh.in:
c++/examples/testh5c++.sh.in:
Updated comments and some cosmetic rearrangement.
No substance changes.
Tested platform:
Copper, kagiso.
Change H5[D|G|T]<foo>_expand() "temporary" API routines to
H5[D|G|T]<foo>2() "versioned" routines. Also added
H5[D|G|T](create|commit)_anon() routines to continue to allow "anonymous"
objects to be created in a file.
Tested on:
Mac OS X/32 10.4.9 (amazon)
FreeBSD/32 6.2 (duty)
FreeBSD/64 6.2 (liberty)
Linux/32 2.6 (chicago)
Linux/64 2.6 (chicago2)
Add version # and flags to external link format (as fields in a single
byte), in order to accomodate future changes/expansions.
Tested on:
Mac OS X/32 10.4.9 (amazon)
Linux/32 2.6 (chicago)
Linux/64 2.6 (chicago2)
FreeBSD/32 6.2 (duty)
FreeBSD/64 6.2 (liberty)
Example incorrectly assumed that string attribute had index 2.
As a result H5Aread failed.
Solution:
Interate through all attributes and find the string, after that read it.
Platforms tested:
kagiso, copper
Description: Multiple copies of Copyright appeared in Makefile.in. This was
due to automake copying the copyright right in the included files such as
config/commence.am.
Solution: Automake treats double hashes as comments and does not copy them
to Makefile.in. Changed all the copyright notices in config/*.am to use
double hashes for the Copyright right notice.
Tested: kagiso via bin/reconfigure.
Tested platform:
Kagiso only since it is only a comment block change. If it works in one
machine, it should work in all, I hope. Still need to check the parallel
build on copper.
The examples had been depending on the build libraries in src, but should have
been depending only on the installed h5cc. Fixed this.
Tested on kagiso (dependency change only, and was unable to replicate the
problem on any system). Real test will be Daily Tests tonight.
It seems that while Cygwin supports the time command, it has trouble with
the syntax
srcdir="../../hdf5/test" time ./testhdf5
and complains.
The solution is to test the above case in configure and not to use the time
command if it fails; Cygwin is fine with
srcdir="../../hdf5/test" ./testhdf5
Tested on Cygwin and kagiso. This feature shouldn't be a major compatibility
problem since every platform but Cygwin is already fine with the current
syntax.
The version of libtool used by HDF5 isn't directly affected by the reconfigure
script; instead, libtoolize --force must be used by hand. Libtool was the
source of the problem, so rolling its version back to 1.5.14 should solve the
issue (at least temporarily).
Reconfigure should still work on both heping and kagiso.
Tested on heping, kagiso, and tg-login3.
Added new example for datasets regions; it uses two new functions
H5Iget_name and H5Rget_name to get name of the dataset the region refernce points to.
Platforms tested:
heping
Should disable linking against shared libraries in Fortran for compilers that
don't support shared libraries.
Should also fix problem when the wrong Fortran file extension was specified.
If these changes don't solve the Daily Test issues, I'll look at backing out
the autotool version change until I have time to fix them.
Tested on heping, kagiso, juniper.
Change H5Pset_elink_prefix to be more similar to rest of library and make
a copy of the string passed in.
Change H5Pget_elink_prefix to be link rest of library routines that query
a string.
Tested on:
FreeBSD/32 4.11 (sleipnir) w/threadsafe & debugging turned on
Linux/32 2.4 (heping) w/FORTRAN & C++
Linux/64 2.4 (mir) w/build-all & 1.6 compat enabled
AIX/32 5.x (copper) w/FORTRAN & parallel
Refactor generic property list initialization code to put property list
specific routines in property list modules, instead of scattered to the four
winds. Also, introduce property list class initialization objects, to make
adding new property list classes in the library easier.
Fix daily test failure by using H5Pget_elink_prefix() API routine instead
of looking at the "raw" generic property list information.
Tested on:
Mac OS X/32 10.4.8 (amazon)
FreeBSD/32 4.11 (sleipnir) w/threadsafe
Linux/32 2.4 (heping) w/C++ & FORTRAN
Linux/64 2.4 (mir) w/build-all & 1.6 compat
the linkval buffer, per Elena and Frank's suggestions while revising
the documentation. Added error checking using this size, as well as a
couple of tests.
Tested on juniper, kagiso, and sol.
and quote its arguments. Also checks for the 'socket' library on
Solaris.
If this patch passes the Daily Tests and makes the user happy, I'll
port it back to the 1.6 branch.
Tested on mir and sol.
File format is not stable, don't keep files produced!
Description:
First stage of checkins modifying the format of groups to support creation
order. Implement "dense" storage for links in groups.
Try to clarify some of the symbols for the H5L API.
Add the H5Pset_latest_format() flag for FAPLs, to choose to use the newest
file format options (including "dense" link storage in groups)
Add the H5Pset_track_creation_order() flag for GCPLs, to enable creation
order tracking in groups (although no index on creation order yet).
Remove --enable-group-revision configure flag, as file format issues are
now handled in a backwardly/forwardly compatible way.
Clean up lots of compiler warnings and other minor formatting issues.
Tested on:
FreeBSD/32 4.11 (sleipnir) w/threadsafe
Linux/32 2.4 (heping) w/FORTRAN & C++
Linux/64 2.4 (mir) w/enable-v1.6 compa
Mac OSX/32 10.4.8 (amazon)
AIX 5.3 (copper) w/parallel & FORTRAN
Since these examples need to follow filesystem paths, the Makefiles need
to create directories in the examples directory; added this to the
Makefile.am.
Tested on Windows, mir, juniper
"make check-vfd" will now run all tests in the test directory with different
file drivers (at least, all of those tests that use the testing framework's
FAPL). Tests that fail will be skipped.
This is not a perfect fix, but is better than nothing.
Along with this change, check-vfd should be added to the Daily Tests.
Configuration feature
Description:
'make install' now tests both static and shared libraries if both are installed.
Solution:
Previously, shared libraries were only tested when static libraries were not installed.
Also cleaned up line in commence.am that was including HL library in all Makefiles.
Platforms tested:
mir (Makefile change only)
Bug fix - bugzilla #552
Description:
On Cray X1, trying to use : as an argument confused the system.
Solution:
Added a test in configure to see if : as an argument is bad.
If so, skipped the test.
Platforms tested:
mir, Cray X1 (change to configure only)
Bug fix.
Description:
The ${TR}, though avoid the error, is inconvenient. It is needed
because configure.in use the char range in the style of 'a-z'.
The other style of '[a-z]' is more commonly accepted by all tr
but autoconf tends to strip away [], making the syntax rather
clumsy.
Solution:
Learned from autoconf that it avoids the use of character range
by just spell all the letters out. Changed our tr commands to
use those variables defined by autoconf. Also removed the
definition of ${TR} since it will cause inconsistancy when
autoconf also use plain 'tr' in its generated code.
The Makefile.in are changed because the elimination of ${TR} from
configure triggered its removal from all Makefil.in. That is okay
because ${TR} is not used at all in Makefile.
Platforms tested:
h5committested. (sol failed to connected). also tested in shanti
using both /usr/ucb/tr and /bin/tr (the bad one before.)
Misc. update:
Updated both INSTALL and RELEASE files.
Several bug fixes
Description:
Added config file for Cray X1 (previous file was misnamed)
Simplified some code in hyperslab.c test that seemed to have been
confusing compiler on Cray X1.
Fixed typo in config/commence.am
Cleaned up hl/src/Makefile.am
Solution:
All four fixes should be straightforward. The failure on Cray was
very difficult to debug, but involved arithmetic errors.
This change seems to fix it.
Platforms tested:
heping, copper, sol, some Cray X1 (more testing when system comes back up)
new feature
Description:
1) separated the HL library into "public" and "private" header files, with the same caracteristics as the basic library
2) added the public headers to hdf5.h (with a conditional include macro, defined in configure.in)
3) added the path to HL in all Makefile.am 's , because of the inclusion in hdf5.h
Solution:
Platforms tested:
linux 32, 64
AIX
solaris
with fortran and c++
(one packet table example fails)
Misc. update:
Bug fix
Description:
Previous checkin did a bad thing; 'make clean' failed in example directories.
Solution:
Fixed commence.am so that examples no longer break, and fixed a mistake
in conclude.am.
Platforms tested:
heping (minor makefile change)
Misc. update:
Bug fix
Description:
make check-clean didn't clean results of example tests
Solution:
Fixed Makefiles so that check-clean recurses into example directories.
Also a little Makefile cleanup.
Platforms tested:
mir, modi4, heping, copper
Description: h5_group example didn't work on VMS; it turned out
that a group was not closed and since the default
file close degree is "weak", file was not closed either.
When program attempted to open the same file, system reported
an error since the file was "locked by another user".
UNIX systems apperently do not care and open the same file
without any problem.
Solution: Added H5Gclose calls.
Platforms tested: VMS server and heping
Misc. update:
Added high-level example directories
Description:
Refactored common code out of examples Makefiles.am, added high-level
example directories, added packet table examples.
Solution:
Examples now draw from a common config/examples.am file, which
contains rules for installing, uninstalling, and cleaning examples.
High-level example directories are mostly empty, except for the
C and C++ packet table tests.
Platforms tested:
mir, sleipnir, copper, shanti
Bug fix
Description:
Fortran type generation was broken in two ways. Fixed both.
Solution:
Firstly, there were a couple of path problems. Fixed a typo and
specified the full path of a file.
Secondly, the dependencies weren't right when building with HDF5-specific
commands (make lib, make check-s, etc.). Tweaked dependencies
to fix the problem.
Platforms tested:
mir, modi4, sleipnir
Configure feature
Description:
Added 'make trace' target.
Solution:
Added tracing to 1.7. This was done automatically in 1.6, but left out
of 1.7 until now (oops!).
Tracing in 1.7 only happens manually, when the user types 'make trace.'
Tracing automatically requires more framework than it's worth.
I also fixed a couple of tracing bugs and ran trace.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Before this checkin, 'gmake check-s' would fail if there was a file in
the current directory named 'check-s'.
This is fixed under gmake (not sure how to fix for other makes).
Solution:
check, progs, install, etc. are what gmake calls "phony" targets,
which means that no file should be created. These targets can be
specified by a line of the form
.PHONY: check progs install ...
Automake adds this line for targets it knows about, but HDF5 has a
lot of custom rules. This checkin adds a .PHONY line for those rules.
I believe that only gmake recognizes the .PHONY line (at least, pmake
doesn't seem to), but a partial solution is better than none.
This error should occur very rarely anyway (the user has to manually
create files with names like 'build-check-s' or '_test').
Platforms tested:
mir, sleipnir, modi4
New feature
Description:
Check in baseline for compact group revisions, which radically revises the
source code for managing groups and object headers.
WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!!
WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!!
This initiates the "unstable" phase of the 1.7.x branch, leading up
to the 1.8.0 release. Please test this code, but do _NOT_ keep files created
with it - the format will change again before the release and you will not
be able to read your old files!!!
WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!!
WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!!
Solution:
There's too many changes to really describe them all, but some of them
include:
- Stop abusing the H5G_entry_t structure and split it into two separate
structures for non-symbol table node use within the library: H5O_loc_t
for object locations in a file and H5G_name_t to store the path to
an opened object. H5G_entry_t is now only used for storing symbol
table entries on disk.
- Retire H5G_namei() in favor of a more general mechanism for traversing
group paths and issuing callbacks on objects located. This gets us out
of the business of hacking H5G_namei() for new features, generally.
- Revised H5O* routines to take a H5O_loc_t instead of H5G_entry_t
- Lots more...
Platforms tested:
h5committested and maybe another dozen configurations.... :-)
Bug fix/feature
Description:
Added support for -shlib in h5fc and h5c++.
Made check-install use -shlib when only shared libraries have been installed.
Solution:
h5fc and h5c++ didn't recognize -shlib. Stole code from h5cc to link against
shared libraries.
When static libraries are disabled, the examples Makefiles will automatically
use the -shlib option to link against shared libraries. Thus,
--disable-static and make check-install should work together.
Platforms tested:
heping(disable-static, enable-static, fortran, c++), modi4 (disable-static, fortran, c++, parallel, enable-static)
Bug fix
Description:
Failed parallel tests now cause make to exit with an error.
Solution:
Edited config/conclude.am to throw an error if parallel test programs fail.
Platforms tested:
heping, modi4
Bug fix
Description:
Changed configure.in to use an environment variable TR to set the path
to the tr utility.
Solution:
There are two kind of tr on Solaris with slightly different syntax.
HDF5's configure relies on the "standard" tr. Traditionally, HDF5ers
have needed to make sure that the "right" tr was found before the
wrong one in their path; now they can use an environment variable.
Platforms tested:
mir, shanti, sol
Misc. update:
Forgot to update release notes. Off to do that now.
Makefile bug fix
Description:
Previously, automake didn't output rules to build perform/mpi-perf or
the test/gen_* programs.
Now these can be built by typing 'make mpi-perf' (or 'make foo') or by
configuring with --enable-build-all.
Solution:
Automake doesn't like having rules for programs it doesn't build. Tricked
it by having these programs built "sometimes"--whenever the user enables
--build-all. This should be used mostly for testing and to ensure that
these helper programs compile.
***IMPORTANT***
These programs do *not* currently compile. When --enable-build-all is used
(not the default), gen_new_fill fails because it uses an old API. This is
an existing "bug" that has simply been exposed by this checkin.
Platforms tested:
sleipnir, modi4, sol
Misc. update:
bug fix.
Description:
When a parallel test script test fails, make would continue because the
way it was setup inside a for loop. Fixed it by issuing an exit 1 inside
the loop.
There was also a typo error in the newer command comparision that it
must be $${chkname} in order to be valid. Also, the test script itself
was not checked in the newer lists. All fixed.
Platforms tested:
h5committested and also hand tested in heping pp mode.
Repair synchronization bug in the metadata cache in PHDF5
Also repair numerous other bugs that surfaced in testing the
bug fix.
Description:
While operations modifying metadata must be collective, we allow
independant reads. This allows metadata caches on different processes
to adjust to different sizes, and to place the entries on their dirty
lists in different orders. Since only process 0 actually writes
metadata to disk (all other processes thought they did, but the writes
were discarded on the theory that they had to be collective), this made
it possible for another process to modify metadata, flush it, and then
read it back in in its original form (pre-modification) form. The
possibilities for file corruption should be obvious.
Solution:
Make the policy that only process 0 can write to file explicit, and
visible to the metadata caches. Thus only process 0 may flush dirty
entries -- all other caches must retain dirty entries until they are
informed by process 0 that the entries are clean.
Synchronization is handled by counting the bytes of dirty cache entries
created, and then synching up between the caches whenever the sum
exceeds an (eventually user specified) limit. Dirty metadata creation
is consistent across all processes because all operations modifying
metadata must be collective.
This change uncovered may bugs which are repaired in this checkin.
It also required modification of H5HL and H5O to allocate file space
on insertion rather than on flush from cache.
Platforms tested:
H5committest, heping(parallel & serial)
Misc. update:
New feature.
Description:
Added the time command to the make check target to report time usage
of the execute of each test and test scripts. This gives us some idea
how long each test takes and some vague idea it is compute bound or
not.
powerpc-ibm-aix5.x:
Change $RUNPARALLEL default setting to allow it being invoked by the
time command.
Platforms tested:
h5committested.
Feature
Description:
Added H5_CFLAGS, etc. to 1.7 branch.
Now compilation flags can be put in H5_*FLAGS and they'll be used when
building hdf5 but not in h5cc.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Disabled C++ shared libraries for Sun Workshop compiler.
Solution:
This bug only seems to happen when using the -xarch=v9 flag to compile in
64-bit mode, but disabling shared libraries entirely for this compiler is
an easier fix (I don't know how to detect 64 bit mode from the command line).
The framework for disabling shared libraries for other C++ compilers is
in place.
Platforms tested:
sol, mir, sleipnir, modi4
Bug fix/feature
Description:
Disabled shared libraries for a number of Fortran compilers that don't
support them.
This allows other compilers to support shared Fortran libraries.
Solution:
Added a conditional, SHARED_FORTRAN_CONDITIONAL, which is true if
Fortran supports shared libraries. It is set in configure.in.
Platforms tested:
mir, sleipnir, colonelk, heping
bug fix.
Description:
In Janus (Tflops), the test would seg-fault in production (compiled
with -O). If compiled with -O0, it would be okay. Track down the
problem to the for loop index i & j being declared with type hsize_t
which is usually unsigned long int. Guess the Tflop compiler has
a bug in optimization that could not handle unsigned int as for loop
index.
Solution:
Since it is no need for i & j to be hsize_t and it makes more
sense to have them with type int. Changed them to int type.
Platforms tested:
Passed in tflops and colonelk here.
tidy up.
Description:
MPE option created *.clog file whenever it is executed in MPI.
The cleanup of *.clog files were done in individual Makefile.in.
Often, it is forgotten.
Solution:
Moved the cleaning of *.clog files to CHECK_CLEANFILES in commence.am
so that it is applied whenever check-clean is called.
Platforms tested:
heping pp using MPE.
Bug fixes
Description:
This checkin fixes an occasional error on kelgia on sol during distclean.
It also causes test scripts to depend properly on the programs they're
supposed to be testing.
Solution:
The kelgia bug was due to some files being cleaned by automake and manually.
Removed the manual cleaning in src/Makefile.am.
Test script dependencies now need to be specified manually, since the
makefile can't guess what they test from their name. Currently all test
scripts in a given directory have a single list of dependencies--this was
easy and seems to be sufficient.
These dependencies are listed in the SCRIPT_DEPEND variable in the Makefile.am.
Platforms tested:
heping, mir, modi4, sol
Misc. update:
minor tidy up.
Description:
Changed both test programs and test scripts to use the same suffixes
(.chkexe and .chklog). Changed from .log to .chklog to avoid running
into potential conflicts by other "things" (e.g., config.log).
Tested:
Heping.
Code cleanup
Description:
Trim trailing whitespace, which is making 'diff'ing the two branches
difficult.
Solution:
Ran this script in each directory:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Platforms tested:
FreeBSD 4.11 (sleipnir)
Too minor to require h5committest
Bug fix and improvement.
Description:
The test output were not displayed for parallel tests.
The serial tests output were always displayed whether the test was
actually ran this time or not.
Solution:
Moved the display of test output inside the target where the actual
tests are run.
Platforms tested:
Tested in heping using pp and fortran.
Bug fix and code minor cleanup.
Description:
The attempt to redirect stderr together to the log files were
done in the wrong order such that stderr output goes to where
stdout WAS. Fixed that.
Code minor cleanup--use shell variables to hold the name of the
log file and the test instead of generating them repeatedly. This
makes easier code reading, less crowded and avoid typos.
Only conclude.in is changed. The Makefile.in changes are all
derived from automake.
Platforms tested:
h5committested.
Misc. update:
Makefile feature
Description:
'make check-clean' now cleans *.h5 files created by tests as well as
.log and .chkexe files.
Solution:
check-clean is now a separate target in its own right, which cleans less
than mostlyclean (check-clean < mostlyclean < clean < distclean).
Platforms tested:
mir, heping, modi4 (serial and parallel)
Feature: check-clean target
Description:
'make check-clean' cleans up output files from tests.
Solution:
Tests create foo.chkexe and foo.log files. Scripts create foo.chksh and
foo.logsh files. 'make check-clean' will clean these files up so that
the tests can be re-run.
Also suppressed some not-very-useful output of Makefiles when it would
echo commands.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Configuration feature
Description:
Serial test output is now stored in log files and printed when all tests
in a directory complete, or when a test fails. This should make test output
more readable and useful.
Also made changes to clean up ii_files directories that are created by some
C++ compilers/linkers.
Also fixed a few minor Makefile bugs.
Solution:
When serial tests run, their output is saved in *.log or *.logsh. While
running, tests only print when they begin and when they complete; their
more specific output (from the log file) is printed if the test fails or
when all tests have completed.
Comments welcome.
Platforms tested:
mir, modi4 (parallel and serial), copper, shanti
Bug fixes
Description:
A number of minor changes to Makefiles. Some files will now be cleaned
properly, some comments are more informative, etc.
Platforms tested:
heping, mir, modi4
Bug fix
Description:
The ".chksh" file for a test script was being created in the "source"
location rather than the build location. This can cause problems when
multiple builds are running because "slower" machines will see the ".cshsh"
file from faster machines and will not run the test script as they should.
Solution:
Use 'basename' command to strip off the path of the script and create
the ".chksh" file in the build location.
Platforms tested:
FreeBSD 4.11 (sleipnir)
h5committest
bug fix.
Description:
-nt is not a universal option for the test command in all platforms.
The use of it in conclude.am cause some platforms to bark at the
Makefile generated.
Solution:
Created a command script bin/newer which tests if file1 is newer
than file2. Replace the "test file1 -nt file2" by
"newer file1 file2".
Platforms tested:
Tested in sol.
Bug fix
Description:
Added dependencies to examples Makefiles so that examples can be run in
parallel.
Solution:
The examples directories (for C, C++, and Fortran) all have some dependencies
explicitly spelled out in their Makefiles.am. This is a good short-term
solution, and should prevent errors in the Daily Tests.
Platforms tested:
mir, modi4 (parallel and sequential)
Bug fix
Description:
Fixed bugs that caused tests to be unable to find testhdf5.sh during
daily tests, and another that broke sol and shanti.
Solution:
When tests are run, their path is ./$testname .
When scripts are run, their path has no leading "./". Fixed.
Sol and shanti don't recognize the -e option for test, but they do know
-f. Fixed.
Also modified release notes.
Platforms tested:
mir, shanti, heping
Feature: tests now use parallel make and only run once
Description:
When make is invoked in parallel (using the -j option), several tests will
now be run simultaneously. This should speed up testing on a number of
systems.
When a test passes, it creates a foo.chkexe or foo.chksh file, which prevents
the test from running again unless the test or library changes.
Solution:
Most of the changes live in config/conclude.am. Added *.chkexe and *.chksh
files to the list of files to be cleaned at "make mostlyclean" time.
Parallel tests still run one at a time, but use the same make instructions
as serial tests.
Platforms tested:
mir, eirene, sleipnir, pommier, copper, modi4 (some errors occurred, probably
due to the test being run before updating hdf5. Will re-run tests after
checkin.)
bug fix
Description:
check-s and check-p were set as pre-requistics of test. They
would get executed in parallel if parallel make is used. This
could cause problems since serial tests are used to be executed
before parallel tests. It is not known if it is always okay to
run serial and parallel tests in simultantously.
Solution:
Change check-s and check-p as actions of the target test so
that they get executed sequnentially.
Platforms tested:
heping PP.
Added check-s and check-p targets.
Description:
Added check-s and check-p targets to 1.7 branch to match changes to 1.6
branch. Now parallel and serial tests can be run separately.
Platforms tested:
mir, modi4, copper
Description: Removed support for SRB driver
Solution: Removed or modified appropriate files; ran reconfigure
to regenerate Makefile.in and configure files.
Platforms tested: heping and shanti
Misc. update: ran bin/chkmanifest on heping
Configuration feature
Description:
Different Fortran compilers mangle function names in different ways
(upper case, lower case, adding underscores). To link between
Fortran and C functions, we need to know what a given function's
name is under a given compiler.
Solution:
Use autoconf's FC_WRAPPERS check to determine the Fortran
naming scheme and define the FC_FUNC_ macro to name our
functions (in H5f90proto.h). Removed references to
our old FNAME macro, as well as flags that indicated whether
function names were upper or lower case.
Platforms tested:
mir, pommier, modi4, copper, more
Bug fix
Description:
On some machines, $RUNSERIAL variable needs to be used to run
tests. Set $RUNTESTS (which is used for non-parallel tests) to
be $RUNSERIAL in configure.am.
Also, since I was updating all Makefiles.in anyway, I updated
commence.am to point to autotools installs in AFS instead of
those on heping.
Platforms tested:
mir, sleipnir, modi4, copper
Purpose:
"Bug fix"
Description:
Hardcoded Makefiles to use /bin/sh instead of letting configure
detect shell automatically. This is what v1.6 does, and avoids
problems on janus.
Platforms tested:
sleipnir, copper, modi4, mir
Feature - conditional compilation
Description:
SRB file driver and tests are now compiled only when SRB is enabled
(using --with-srb during configure).
Solution:
Added an automake conditional in configure.in, altered Makefiles.am in
src and test directories to depend on that conditional.
This should make a nice example for posterity to add conditionally
compiled sources.
Platforms tested:
heping (only configure change)
Purpose:
Added C++ wrapper for Packet Table API.
Description:
Added macro for high-level C++ library (LIBH5CPP_HL), which changes every
Makefile.in.
Added directories for high-level C++ library (though currently only Packet
Table API is supported).
Added both C++ source and tests.
Platforms tested:
sleipnir, mir, modi4
Misc. update:
Automake version upgrade
Description:
Upgraded automake version from 1.6.2 to 1.9.5.
Changed bin/reconfigure script to use automake 1.9.5.
Changed configure.in and Makefiles to use new FCFLAGS and FC variables
instead of FFLAGS and F9X.
Automake and configure should now do the lion's share of the work
supporting Fortran 9X; macros in acsite.m4 are now mostly unused (will
be cleaned later).
Altered how configure handles pmake; now root-level Makefile.in is
processed by bin/reconfigure to have a .MAKEFLAGS target, since
automake no longer allows us to define unused variables.
Configure now always checks for C++ compiler even if it is not
used, since automake thinks this is the Right Thing To Do and
will break otherwise.
Platforms tested:
Sol, copper, heping, mir, sleipnir, eirene, pommier, kelgia, modi4.
Removed GASS configuration and software packages associated with
it. The following software are no longer configurable.
checking for main in -lcrypto... yes
checking for SSL_get_version in -lssl... yes
checking globus_common.h usability... yes
checking globus_common.h presence... yes
checking for globus_common.h... yes
checking for globus_module_activate in -lglobus_common... yes
checking for main in -lglobus_gass_cache... yes
checking for main in -lglobus_gaa... yes
checking for main in -lglobus_gss... yes
checking for main in -lglobus_gss_assist... yes
checking for main in -lglobus_io... yes
checking for main in -lglobus_gass_transfer_assist... yes
checking for main in -lglobus_gass_transfer... yes
checking for globus_gass_open in -lglobus_gass_file... yes
Platforms tested:
h5committested (but copper was down.) tested in modi4 too.
Purpose:
Bug fix
Description:
modi4 dies during build with strange errors.
The root cause of these is a two-year-old hack in HDF5's libtool
script that only takes effect on IRIX.
Solution:
Edited the libtool hack (by editing ltmain.sh) to correct a bug in
the hack.
Also made sure that compiler-specific DEFAULT_LIBS are used
when linking.
Platforms tested:
sleipnir, copper, modi4, sol
Bug fix
Description:
pmake (on modi4, for instance) complains about undefined variables
if it is run without the -V flag, which turns those errors to warnings.
Solution:
Added test to configure.in to see if $MAKE will allow Makefiles
with undefined variables. If not, sets -V flag in AM_MAKEFLAGS.
Ensured that all custom make targets use AM_MAKEFLAGS.
Also defined all variables that caused errors in top-level Makefile.am.
This means that pmake can be used to build hdf5 *from the top level
only*. To run make from a subdirectory, still need to use -V flag
(or use make or gmake).
Platforms tested:
modi4, heping, copper, sleipnir
Purpose:
Bug fix
Description:
Parallel builds were breaking in tools/lib
Solution:
talign didn't realize it depended on libh5tools.la because its
dependencies listed the full path (../../tools/lib/libh5tools.la).
Changed this, and made similar changes in a couple of other
directories.
This checkin should also add the --foreign flag to every Makefile.in
Platforms tested:
sleipnir (minor change)
New feature
Description:
Add basic code for new B-tree implementation. They don't do much yet,
aren't hooked up to anything yet and the format may change, but I'd like to
start getting them into the daily tests.
Platforms tested:
FreeBSD 4.11 (sleipnir) w/parallel
Too minor to require h5committest
Bug fix
Description:
Found the permanant fix to automake/CVS dependency problem
Solution:
Added AM_MAINTAINER_MODE macro to configure.in.
Now automake will never try to regenerate Makefiles, Makefiles.in,
configure, H5config.h, etc. when they are out of date, nor will it
print any warnings.
Developers should be very very careful to use reconfigure script,
and can add --enable-maintainer-mode flag to configure on heping
to regenerate these files correctly.
Platforms tested:
heping sleipnir copper
Bug fix
Description:
Configuration files' timestamps were incorrect.
Solution:
Update Makefiles.in. Also added correct paths to autotools on heping,
so heping build should be able to re-generate configuration files even
if they are still broken.
Platforms tested:
sleipnir
Bug fix
Description:
Dependencies between configure files (aclocal, configure.in, configure,
Makefiles.am and .in) are still causing Makefiles to try to run autotools
during build.
Solution:
Committed all Makefiles.in to update their timestamps.
As a temporary measure, forcibly prevented automake from running
autotools during build by redefining the variables it uses.
Platforms tested:
sleipnir (No changes to Makefile content)
Bug fix
Description:
Different compilers use different flags to include Fortran module files
Solution:
Changed boilerplate to use configure variable rather than hardcoded -M flag.
Platforms tested:
sleipnir, sol, copper
Configuration feature
Description:
HDF5 now uses automake to generate Makefiles
Solution:
Makefile.in files are now generated from Makefile.am files.
To reconfigure (after chaning a Makefile.am or configure.in):
/bin/sh bin/reconfigure.sh
Platforms tested:
Many
Bug Fix/Code Cleanup/Doc Cleanup/Optimization/Branch Sync :-)
Description:
Generally speaking, this is the "signed->unsigned" change to selections.
However, in the process of merging code back, things got stickier and stickier
until I ended up doing a big "sync the two branches up" operation. So... I
brought back all the "infrastructure" fixes from the development branch to the
release branch (which I think were actually making some improvement in
performance) as well as fixed several bugs which had been fixed in one branch,
but not the other.
I've also tagged the repository before making this checkin with the label
"before_signed_unsigned_changes".
Platforms tested:
FreeBSD 4.10 (sleipnir) w/parallel & fphdf5
FreeBSD 4.10 (sleipnir) w/threadsafe
FreeBSD 4.10 (sleipnir) w/backward compatibility
Solaris 2.7 (arabica) w/"purify options"
Solaris 2.8 (sol) w/FORTRAN & C++
AIX 5.x (copper) w/parallel & FORTRAN
IRIX64 6.5 (modi4) w/FORTRAN
Linux 2.4 (heping) w/FORTRAN & C++
Misc. update:
Bug fix, sorta.
Description:
Revert change to H5Pget_data_transform() which changed len of buffer
returned to be inconsistent with H5Iget_name(), etc. We should discuss this
change and apply it to all the similar functions if we decide to change the
return value.
Platforms tested:
FreeBSD 4.10 (sleipnir)
Too minor to require h5committest
Added data transform example
Description:
Added example code for the data dtransform
Solution:
This code both illustrates how data transform works and shows how to use it.
Examples of data transform on read, write, and both at the same time.
Also shows usage of H5Pget_data_transform
Platforms tested:
eirene + copper
Misc. update:
Bug fix
Description:
The examples would compile even if some header file were not
installed. That was because the CPPFLAGS has -I... components
that included the src directories.
Solution:
The h5cc or h5pcc commands should have all the necessarily
library include directories covered. Changed CPPFLAGS to
search only the examples source directory for local header
files.
Platforms tested:
No h5committest tests which do not check examples.
Hand tested it in sol.
Bug fix, sort of.
Description:
Some compilers, e.g., intel compiler, would take a long time
to compiler H5detect.c if optimization is on.
Solution:
Setup special make rules for H5detect to be compiled always with
optimization off by using -g. Since H5detect is run once to generate H5Tinit.c,
it does not matter that much if it is optimized or not.
Platforms tested:
"h5committested".
Tested in Titan too.
Bug fix
Description:
Hack on include paths some more to make srcdir builds work correctly with
the [broken] dependency generation from the Intel 7.1 C compiler.
Platforms tested:
Linux 2.4 (titan) w/srcdir build
Too minor to require h5committest
Bug fix
Description:
Added directory where actual source code is located to allow broken Intel
C 7.1 compiler to generate dependencies correctly.
Platforms tested:
Linux 2.4 (titan)
too minor to need h5committest
Bug fix.
Description:
"make check" failed because the macro "$<" is not known to those
makes.
Solution:
Replace that macro with a string name in the form of a more basic
macro of "$@".
Platforms tested:
h5committested (copper used make.)
Misc. update:
Improvement
Description:
If the library is built in parallel mode, then name the "h5cc" and
"h5fc" programs "h5pcc" and "h5pfc" resp. This saves the user from
worrying about mixing serial and parallel builds of the library and
having to specify the pathnames and so-forth.
Platforms tested:
Linux (w/ parallel & Fortran)
Modi4 (w/ parallel & Fortran)
Sol (Serial & Fortran & C++)
Misc. update:
Updated release/docs/RELEASE
Updated the copyright notice--mostly by rearranging
some text to make them consistent.
Solution:
Platforms tested:
"h5committested"--sol is down, so, no SUn test.
Misc. update:
Purpose: Enhancement
Description: This example writes extendible dataset and doesn't use fill value.
On some systems (verebena, titan) unwritten data will be displayed as
garbage by h5_chunk_read.
Solution: Use H5Pset_fill_value to set 0 fill value.
Platforms tested: arabica, verbena, titan
Misc. update:
Update/Fix
Description:
The Dependencies files weren't begin generated properly for C++.
Solution:
Modified the "dependencies" script to use "top_srcdir" only instead
of "srcdir", which tended to confuse matters. Regenerated the
Dependencies files.
Platforms tested:
Arabica (Small changes)
Misc. update:
Code Cleanup
Description:
Warning messages were being produced by the "make" program because
the "docdir" was being specified twice as a target in the generated
Makefiles. This is because the "EXAMPLESDIR" was also defined as
"docdir".
Solution:
Made "EXAMPLESDIR" unique for C, Fortran, and C++ in the commence.in
file and removed EXAMPLESDIR from the Makefile.ins
Platforms tested:
Dangermouse (only affects make system, not code).
Misc. update:
Improvement
Description:
if neither -f option nor $HDF5_PARAPREFIX was set, it exited.
Solution:
Use '.' (current directory) if neither -f option nor $HDF5_PARAPREFIX
is used. Try to proceed as much as possible.
Platforms tested:
only sleipnir since it was a simple fix and was failing in sleipnir
only.
Bug Fix
Description:
Making of the programs when using the --srcdir option didn't work. It
couldn't find the files to compile.
Solution:
Specified where the files are by prepending the $(srcdir) macro to
them.
Platforms tested:
Linux
Bug Fix
Description:
Ported the bug fix for h5cc failing on platforms from the 1.4 branch
to 1.5 branch. In a nutshell, when we ran "make check" in the
examples directory, libtool would get in the way trying to compile
things to .lo for us. but we didn't want libtool to do this.
Solution:
Made it so that make check will compile only the .c files to
executables without the intervening .lo stage...
Platforms tested:
Linux (Dangermouse and Platinum)
fetures
Description:
The example code used to just run parallel I/O test in the current
directory which is most likely where the program is compiled.
In general, this directory is most likely not a parallel file system.
Therefore, the example code often fails.
Solution:
Add an option "-f <prefix>" for specifying the correct test files
pathname prefix. The program now requires an explicite file prefix
either via the "-f" option or the environment variable $HDF5_PARAPREFIX.
(With the proper setup of $HDF5_PARAPREFIX, the example code can run
automatically in situtaions such as batch job or gmake check.)
Also added feature to cleaup up the test files created.
Of course, an added option "-c" to turn OFF the cleanup action.
Platforms tested:
eirene, modi4, dangermouse (all parallel modes).
modi4 (serial) just to verify it can compile.
Feature
Description:
Change examples to use the installed h5cc to compile the examples
programs. That will test the correctness of the installed software.
Removed examples from make targets in the top level so that it does
not get invoked in make or make check since one cannot compile
the example programs until after "make install" has completed.
Platforms tested:
eirene and modi4 (parallel)
Retired run_examples.sh. Its purpose is covered by the
"check" target.
Platforms tested:
No tests--hard to test something that is removed. Pretty
sure it is not needed by any Make targets.
Bug fix
Description:
$TEST_PROG_PARA was included in the serial tests.
$TEST_PROG_PARA was not dependent on $LIBHDF5 (it should.)
Solution:
Adjusted the file to fix both problems.
Platforms tested:
eirene (pp, linux 2.2.), dangermouse (pp, linux 2.4)
modi4 (pp, -64) and modi4 serial (to verify that ph5example was not
tested at all.)
Removing the DPSS (gridstorage) driver source code.
Description:
The DPSS (using Grid-Storage) driver is retired.
Removed the configure option with-gridstorage from configure.in.
Cvs remove the following files
./src/H5FDdpss.c
./src/H5FDdpss.h
./test/dpss_read.c
./test/dpss_write.c
Regenerated Dependencies files (some had to be hand-edited since
'make depend' did not cover them.)
Removed reference to DPSS Virtual file driver from H5F.c.
Platforms tested:
modi4 (Parallel; -with-gass=...), eirene, arabica (fortran, cxx).
Bug Fix.
Description:
The H5Rget_object_type function could not get the object type for dataset
region references.
Solution:
Added a new function, H5Rget_obj_type, to replace H5Rget_object_type.
The new function requires the reference type as an additional parameter,
in order to allow queries on different reference types to be performed
correctly.
Platforms tested:
FreeBSD 4.4. (sleipnir)
Code cleanup for better compatibility with C++ compilers
Description:
C++ compilers are choking on our C code, for various reasons:
we used our UNUSED macro incorrectly when referring to pointer types
we used various C++ keywords as variables, etc.
we incremented enum's with the ++ operator.
Solution:
Changed variables, etc.to avoid C++ keywords (new, class, typename, typeid,
template)
Fixed usage of UNUSED macro from this:
char UNUSED *c
to this:
char * UNUSED c
Switched the enums from x++ to x=x+1
Platforms tested:
FreeBSD 4.4 (hawkwind)
Purpose:
Feature Add
Description:
Added "install-example" and "install-all" to the Makefile system.
The behaviour of the "make install*" options:
make install - Installs binaries, libraries, include
files, and example programs.
make install-examples - Installs only the example programs.
The directories are:
${prefix}/doc/hdf5/examples/{c,c++,fortran}
make install-all - Install the binaries, libraries, include
files, example programs, and
documentation. The whole kit-n'-caboodle.
make uninstall-examples - Get rid of those example files (but not
the ${prefix}/doc/hdf5/examples/...
directories)
There's a new bin/ program which helps create directories which are
deeply nested called "mkdirs". It's a simple shell script.
Platforms tested:
Linux
Feature
Description:
Added an example program showing how to use different virtual
file drivers. First example is to show the Split File driver.
Platforms tested:
eirene.
Purpose:
Bug Fix
Description:
The way we were generating Dependencies and .depend files was broken.
If the $srcdir or other macros began with a ".", then it would match
anything and cause problems since it would then overwrite the
beginning of the header file's path.
Solution:
Wrote a Perl script which can handle this type of weirdness better.
It's only used when the environment is a GNU one with a GCC
compiler...
Platforms tested:
Linux
bug fix
Description:
The last reported problem that the parallel example program
in examples could not be compiled, could not be duplicated
again. I guessed maybe Rushad mistook the compile warning
messages as error messages. Just a guess.
Furthermore, the changed examples/Makefile.in and configure.in,
did not work for the parallel case. The examples/ph5example.c
was never included for compiling.
Solution:
Removed the fix in configure.in, put ph5exmple directly back
in the examples/Makefile.in but put it in a variable for
easier future maintenance. Also, easier to identify the
parallel examples too.
Platforms tested:
Eirene, both serial and parallel modes.
