and replace it with new url for COPYING file.
Fix 2 lines in java error test expected output file where messages
include line numbers changed by reducing the copyright header by 2
lines.
Use environment variable instead of command parameter to test
the install via $DESTDIR test.
Tested:
Jam and smirom by hand. (no h5committest which does not test this change.)
Added a Make target of check-all-install to test the correctness of
installing via the prefix= or $DESTDIR options.
Platforms tested:
h5committested and jam serial mode. Then test check-all-install by hand.
Description: Removing make target "check-perform". The extra target is unneeded
because the perform tests don't take as long to run as initially
anticipated, and can be lumped in with 'make check'.
Tested: kagiso
Description: Tests in perform directory were never getting run, and
h5perf* programs were not being installed.
Solution: Added another build option, 'make check-perform', which runs the
tests in the perform directory. Also modified the Makefiles in the
perform directory to install (with 'make install') h5perf when
parallel is enabled, and h5perf and h5perf_serial when parallel
is disabled.
Tested: kagiso, smirom, linew
"make check-vfd" will now run all tests in the test directory with different
file drivers (at least, all of those tests that use the testing framework's
FAPL). Tests that fail will be skipped.
This is not a perfect fix, but is better than nothing.
Along with this change, check-vfd should be added to the Daily Tests.
Bug fix
Description:
Previous checkin did a bad thing; 'make clean' failed in example directories.
Solution:
Fixed commence.am so that examples no longer break, and fixed a mistake
in conclude.am.
Platforms tested:
heping (minor makefile change)
Misc. update:
Bug fix
Description:
make check-clean didn't clean results of example tests
Solution:
Fixed Makefiles so that check-clean recurses into example directories.
Also a little Makefile cleanup.
Platforms tested:
mir, modi4, heping, copper
Moved gif2h5 tool to hl directory
Description:
Added a tools directory under the hl directory and moved the gif2h5 tool
to that directory.
Solution:
The gif2h5 tool was originally built in the tools directory, but this
introduced dependency issues that required special checks in the
Makefiles.am and required the top-level build order to be changed
because it depended on the HL library.
For simplicity in the Makefiles now and in the future, the gif2h5 tool
was moved to be underneath the hl library.
Platforms tested:
mir, copper, modi4, shanti
bug fix
Description:
the linking order in Makefile.am of the gif2h5 tool was causing linking errors on some configurations (pgcc, --disable-shared)
Solution:
changed the order of the linking (hl before hdf5)
Platforms tested:
linux, several configurations
solaris
Misc. update:
bug fix
Description:
the build order of the several folders was causing linking errors
Solution:
changed the "." to be the last to avoid it
Platforms tested:
linux
Misc. update:
bug fix , bugzilla bug #1
Description:
the gif2h5 was not writing HDF5 images correctly
Solution:
use the Image API to write the image, rewrote the writing functionY
Platforms tested:
linux
solaris
Misc. update:
Configure feature
Description:
Added 'make trace' target.
Solution:
Added tracing to 1.7. This was done automatically in 1.6, but left out
of 1.7 until now (oops!).
Tracing in 1.7 only happens manually, when the user types 'make trace.'
Tracing automatically requires more framework than it's worth.
I also fixed a couple of tracing bugs and ran trace.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Errors on sol may have been due to "make clean" being run both
manually and by automake. Removed the manual run.
Also cleaned c++/examples/ii_files directory created by some compilers
(e.g., on modi4).
Solution:
This does mean that examples directories will not be cleaned by
'make clean'.
Platforms tested:
sol, mir, heping, modi4
Makefile feature
Description:
'make check-clean' now cleans *.h5 files created by tests as well as
.log and .chkexe files.
Solution:
check-clean is now a separate target in its own right, which cleans less
than mostlyclean (check-clean < mostlyclean < clean < distclean).
Platforms tested:
mir, heping, modi4 (serial and parallel)
Purpose:
Bug fix
Description:
Fixed a Makefile bug that would cause make clean to fail on some platforms
when C++ is enabled.
Platforms tested:
sleipnir, mir
Misc. update:
Feature: check-clean target
Description:
'make check-clean' cleans up output files from tests.
Solution:
Tests create foo.chkexe and foo.log files. Scripts create foo.chksh and
foo.logsh files. 'make check-clean' will clean these files up so that
the tests can be re-run.
Also suppressed some not-very-useful output of Makefiles when it would
echo commands.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Configuration feature
Description:
Serial test output is now stored in log files and printed when all tests
in a directory complete, or when a test fails. This should make test output
more readable and useful.
Also made changes to clean up ii_files directories that are created by some
C++ compilers/linkers.
Also fixed a few minor Makefile bugs.
Solution:
When serial tests run, their output is saved in *.log or *.logsh. While
running, tests only print when they begin and when they complete; their
more specific output (from the log file) is printed if the test fails or
when all tests have completed.
Comments welcome.
Platforms tested:
mir, modi4 (parallel and serial), copper, shanti
Bug fix
Description:
Update Makefiles now that docs are no longer in main hdf5 tree.
Solution:
Changed root-level Makefile.am not to recurse into docs tree.
Removed docs Makefiles from configure.in.
Removed config/commence-doc.am, since it is no longer used.
Platforms tested:
mir (change to Makefiles only)
Added check-s and check-p targets.
Description:
Added check-s and check-p targets to 1.7 branch to match changes to 1.6
branch. Now parallel and serial tests can be run separately.
Platforms tested:
mir, modi4, copper
Bug fix (kind of...)
Description:
When trying to 'make distclean', the Makefiles will attempt to re-run
configure if configure has changed. This is a nice idea, but prevents
the distclean from happening if configure fails (e.g., if the environment
has changed). This happens frequently in the Daily Tests when configure
is altered.
Solution:
It turns out to be easier than I had feared to override the dependency
that is causing configure to be re-run. Now configure will never
be run automatically, even if it is out-of-date.
It would be more complicated to cause it to be re-run in all cases except
distclean, so we'll try just the inelegant fix for now.
Platforms tested:
mir. This change doesn't affect the source, only what is built when.
The real test will be how the Daily Tests handle changes to configure
(like the one I checked in earlier today).
Feature: make install now installs h5perf
Description:
h5perf is now installed in hdf5/bin during 'make install.'
Same change as in the 1.6 branch.
Platforms tested:
mir
Automake version upgrade
Description:
Upgraded automake version from 1.6.2 to 1.9.5.
Changed bin/reconfigure script to use automake 1.9.5.
Changed configure.in and Makefiles to use new FCFLAGS and FC variables
instead of FFLAGS and F9X.
Automake and configure should now do the lion's share of the work
supporting Fortran 9X; macros in acsite.m4 are now mostly unused (will
be cleaned later).
Altered how configure handles pmake; now root-level Makefile.in is
processed by bin/reconfigure to have a .MAKEFLAGS target, since
automake no longer allows us to define unused variables.
Configure now always checks for C++ compiler even if it is not
used, since automake thinks this is the Right Thing To Do and
will break otherwise.
Platforms tested:
Sol, copper, heping, mir, sleipnir, eirene, pommier, kelgia, modi4.
Bug fix
Description:
pmake (on modi4, for instance) complains about undefined variables
if it is run without the -V flag, which turns those errors to warnings.
Solution:
Added test to configure.in to see if $MAKE will allow Makefiles
with undefined variables. If not, sets -V flag in AM_MAKEFLAGS.
Ensured that all custom make targets use AM_MAKEFLAGS.
Also defined all variables that caused errors in top-level Makefile.am.
This means that pmake can be used to build hdf5 *from the top level
only*. To run make from a subdirectory, still need to use -V flag
(or use make or gmake).
Platforms tested:
modi4, heping, copper, sleipnir
Configuration feature
Description:
HDF5 now uses automake to generate Makefiles
Solution:
Makefile.in files are now generated from Makefile.am files.
To reconfigure (after chaning a Makefile.am or configure.in):
/bin/sh bin/reconfigure.sh
Platforms tested:
Many
