Description:
Changed Skip list package to use a deterministic skip list. This allows the
skip list package to avoid calling rand() and srand(), even on machines without
rand_r(). There is no longer a p-value or maximum level for skip lists.
Tested: jam, smirom, linew (h5committest)
ISSUE : h5repack does not handle group creation order flags.
ACTION: call H5P(g)(s)et_link_creation_order functions when handling groups, add new groups with these flags to the test generation program, and verify results in the test program.
TEST: in the test program, function that compares property lists, added code to verify groups
tested: windows, linux, solaris
ISSUE : the tools use the following formula to read by hyperslabs: hyperslab_size[i] = MIN( dim_size[i], H5TOOLS_BUFSIZE / datum_size) where H5TOOLS_BUFSIZE is a constant defined of 1024K. This is OK as long as the datum_size does not exceed 1024K, otherwise we have a hyperslab size of 0 (since 1024K/(greater than 1024K) = 0). This affects h5dump. h5repack, h5diff
SOLUTION: add a check for a 0 size and define as 1 if so.
TEST FOR H5DUMP: Defined a case in the h5dump test generator program of such a type (an array type of doubles with a large array dimension, that was the case the user reported). Since the written file commited in svn would be around 1024K, opted for not writing the data (the part of the code where the hyperslab is defined is executed, since h5dump always reads the files). Defined a macro WRITE_ARRAY to enable such writing if needed. Added a run on the h5dump shell script. Added 2 new files to svn: tools/testfiles/tarray8.ddl, tools/testfiles/tarray8.h5. NOTE: while doing this I thought of adding this dataset case to an existing file, but that would add the large array output to those files (the ddls). The issue is that the file list is increasing.
TEST FOR H5DIFF: for h5diff the check for reading by hyperslabs is H5TOOLS_MALLOCSIZE (128 * H5TOOLS_BUFSIZE) or 128 Mb. This makes it not possible to add such a file to svn, so used the same method as h5dump (only write the dataset if WRITE_ARRAY is defined). As opposed to h5dump, the hyperslab code is NOT executed when the dataset is empty (dataset is not read). Added the new dataset to existing files and shell run (tools/h5diff/testfiles/h5diff_dset1.h5 and tools/h5diff/testfiles/h5diff_dset2.h5 and output in tools/h5diff/testfiles/h5diff_80.txt).
TEST FOR H5REPACK: similar issue as h5diff with the difference that the hyperslab code is run. Added a run to the shell script (with a filter, otherwise the code uses H5Ocopy).
tested: linux (h5commitest failed , apparently it did not detect the code changes in /tools/lib that fix the bug: the error in an assertion in the hyperslab of 0. I am sure that making h5ccomitest --distclean will detect the new code , but don't want to wait more 3 hours :-) )
When reading the compression parameter keyword, the compression type read flag was incorrectly set to read, removed this line of code
in->configOptionVector[COMPRESS] = 1;
Modified one configuration file to have the COMPRESSION-TYPE GZIP
Keyword.
Entered a bug description fix of
- h5import: By selecting a compression type, a big endian byte order was being
selected (PVN - 2009/11/3)
tested: linux
Bug Fix
Description:
Fixing BZ #1381. The --includedir=DIR configure option, which is used
to specify the installation location of C header files, did not work
correctly as the path was hard-coded in config/commence.am. I'm presuming
this is because an older version of automake didn't know where to put
c header files. In any case, removing this line now defaults the includedir
to the same directory that it is currently hard-coded to, and also fixes
the configure flag to allow customization of this value.
Tested:
jam, liberty
Remove another call to H5E_clear_stack() from within the library.
Clean up lots of compiler warnings.
Tested on:
Mac OS X/32 10.5.6 (amazon)
(followup on other platforms forthcoming)
the way h5ls prints types, it starts searching for NATIVE types first. One solution would be h5ls not to detect these native types, using for example the same print datatype function that h5dump does, that would make the output look the same on all platforms ("32-bit little-endian integer" would be printed instead). Drawback, this "native" information would not be available. Other solution is to have not one but 2 expected outputs and make the shell script detect the endianess and compare with one output or other
tested: h5committest
Solution: for compound types, recursively apply that check
Two new cases are added
1) the compound type has a different number of members. Message printed is
<obj1> has X members <obj2> has Y members
Where X and Y are the number of members of each compound type being compared
2) the compound type has not comparable types (for example a double and an int at the same index)
In this case the message
Comparison not possible: object1 is of class1 and object2 is of class2
Is replaced with
Comparison not possible: object1 has a class1 and object2 has a class2
Modified the test generator program to have these 2 cases
Added a shell run for these 2 cases
Tested: windows, h5committest
Correct error introduced in r16353 with layout version, and add test
so it gets caught earlier.
Tested on:
FreeBSD/32 6.3 (duty)
Too minor to require h5committest
Description: When attempting to copy an object with a message shared in its own
object header, the library attempts to protect the same object header twice.
Previously, it was possible for the object header to be protected with write
access in one or both of these protects, which would be illegal. The library
should now always protect with read only access in this case. The conditions
for fixing incorrect datatype versions have been made weaker to support this
change. The version will only be corrected if the object header the datatype
is in is modified.
Tested: jam, smirom (h5committest)
Bring r16353 back from revise_chunks branch:
Refactor internal layout information, making it easier to add another
type of chunk index.
Tested on:
FreeBSD/32 6.3 (duty)
(other platforms tested with original patch)
-N, --nan Avoid NaNs detection
Note: there is no shell script run for datasets with NaN because the output is non portable (different results and NaN strings for different systems)
Tested: windows, linux
Storage: information not available
When displaying storage information for VL and dataset region types
Added 2 shell runs that display this information
#818
Tested: windows, linux
PG compiler complains about array out of bounds (a rank of zero was not checked)
Adding a scalar dataset to the test generator program. this case is run on a previous existing run, the case was added to 2 existing files
Tested: windows, linux
Rename internal routines, variables, macros, typedefs, etc. for chunked
dataset storage from "istore" to some variant of "chunk" or "btree".
Tested on:
Mac OS X/32 10.5.5 (amazon) in debug mode
Mac OS X/32 10.5.5 (amazon) w/C++ & FORTRAN, w/threadsafe,
in production mode
FreeBSD/32 6.3 (duty) in debug mode
FreeBSD/64 6.3 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (jam) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/Intel compilers w/default API=1.6.x,
w/C++ & FORTRAN, in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
Linux/64-amd64 2.6 (abe) w/parallel, w/FORTRAN, in production mode
* Pedro Vicente, pvn@hdfgroup.org, Nov 4, 2008
* Compare the graph and make h5diff return 1 for difference if
* 1) the number of objects in file1 is not the same as in file2
* 2) the graph does not match, i.e same names (absolute path)
* 3) objects with the same name are not of the same type
When -b was requested and no -o (file name) binary output was made to stdout
Had a check after command line parsing to verify if -o is present, otherwise exit
Tested: windows, linux
Introduced a new feature in the tools library regarding command line parsing
In the definition of arguments, an "*" means that the switch can or can not have an optional argument. This "*" is put in the code regarding the letter definition, and it is transparent to the user (e.g b* instead of the previous b: ), where ":" notes a required argument after the letter (and no ":" or "*" notes no argument, mandatory)
Used for the h5dump binary option -b
It can be now
1) -b (defaults to NATIVE)
2) - b NATIVE
3) - b FILE
4) -b LE
5) -b BE
Note: the keyword NATIVE replaces MEMORY
This feature (-b with no argument) was tested with the sequence of h5dump to binary (NATIVE) then h5import to generate an HDF5 file from the binary file and h5diff to compare the 2 HDF5 files
Tested: linux
