Add small 'h5mkgrp' tool to create groups in an HDF5 file from the command
line, allowing the group structure for a file to be created in a script. This
tool closely follows the 'mkdir' command line tool in UNIX/Linux.
Allow tool library applications to pass a FAPL to the h5tool_fopen() call,
giving some additional flexibility to tools which are adding objects to an
existing HDF5 file (like h5copy & h5mkgrp).
Fix missing files in MANIFEST from previous checkin(s).
Tested on:
Linux/32 2.6 (chicago)
Linux/64 2.6 (chicago2)
Add feature to h5copy to allow it to add an object to an existing file,
instead of blowing away existing file.
Modify h5tools_fopen() routine to take access flags, so it can be used
to open an existing file for writing.
Added check to h5copy test script that verifies it has produced a file
with the correct structure.
Tested on:
Linux/32 2.6 (chicago)
Linux/64 2.6 (chicago2)
Tested platform:
Kagiso only since it is only a comment block change. If it works in one
machine, it should work in all, I hope. Still need to check the parallel
build on copper.
It seems that while Cygwin supports the time command, it has trouble with
the syntax
srcdir="../../hdf5/test" time ./testhdf5
and complains.
The solution is to test the above case in configure and not to use the time
command if it fails; Cygwin is fine with
srcdir="../../hdf5/test" ./testhdf5
Tested on Cygwin and kagiso. This feature shouldn't be a major compatibility
problem since every platform but Cygwin is already fine with the current
syntax.
New version of the function h5tools_dump_simple_subset, to display subsetting. The new algorithm is:
Introduced an outer loop for cases where dimensionality is greater
than 2D. In each iteration a 2D block is displayed by rows in a inner
loop. The remainning slower dimensions above the first 2 are incremented
one at a time in the outer loop
Note: when blocks are introduced, the display is not correct. This is a bug that requires an improvement of the algorithm.
Fixed#720 h5dump: improve how region references are displayed. h5dump now uses the new API function H5Rget_name to display the name of the dataset referenced instead of its ID. Added a case to the script test file
fix for bugzilla bug #551
several programming errors contributed to this bug
1) the parsing of subsetting was using atoi to convert the parameter to an int,
which caused problems for numbers greater that int. Substitute with atof
2) several index counters were declared as int, use hsize_t instead
3) the numerical format passed for printf was %lu, defined one compatible with
hsize_t instead (unsigned long long)
Fix several bugs
1) the parsing of subsetting was using atoi to convert the parameter to an int, which caused problems for numbers greater that int. Substitute with atof
2) the printing of indices in the subsetting case was not being done. Solution: calculate the element position at the start of the subsetting using the algorythm
Given an index I(z,y,x) its position from the beginning of an array of sizes A(size_z, size_y,size_x) is given by
Position of I(z,y,x) = index_z * size_y * size_x
+ index_y * size_x
+ index_x
And pass that position to the function that dumps data, h5tools_dump_simple_data.
3) several index counters were declared as int, use hsize_t instead
4) modified the test generation program so that it includes test cases for subsetting of 1d, 2d, 3d, and 4d arrays and add these tests to the shell script
fixed 2 initializations of char* with HDstrdup and HDcalloc
info->prefix = HDcalloc(1, 1);
fname = HDstrdup(argv[opt_ind]);
some were exposed by compiler warnings
Cleaned warnings
h5diff_array.c:804: warning: passing arg 1 of `fabs' as floating rather
than integer due to prototype
introduced double precision arithmetic when possible instead of single
precision
Added a relative error formula to deal with floating point uncertainty
in the comparison of floats and double types.
Added new tests for this feature to the file generator program and to
the shell script
Basic support for H5Literate() routine. Still needs to be fleshed out and
refactored to simplify. Also, needs tests. :-)
Tested on:
FreeBSD/32 4.11 (sleipnir)
Linux/32 2.4 (heping)
Linux/64 2.4 (mir)
AIX/32 5.? (copper)
Mac OS X/32 10.4.8 (amazon)
The version of libtool used by HDF5 isn't directly affected by the reconfigure
script; instead, libtoolize --force must be used by hand. Libtool was the
source of the problem, so rolling its version back to 1.5.14 should solve the
issue (at least temporarily).
Reconfigure should still work on both heping and kagiso.
Tested on heping, kagiso, and tg-login3.
Add new H5Lget_val_by_idx() routine & tests.
Also includes most of changes for H5Ldelete_by_idx() routine.
Tested on:
Mac OS X/32 10.4.8 (amazon)
FreeBSD/32 4.11 (sleipnir)
Linux/32 2.4 (heping)
Linux/64 2.4 (mir)
AIX/32 5.? (copper)
Should disable linking against shared libraries in Fortran for compilers that
don't support shared libraries.
Should also fix problem when the wrong Fortran file extension was specified.
If these changes don't solve the Daily Test issues, I'll look at backing out
the autotool version change until I have time to fix them.
Tested on heping, kagiso, juniper.
h5dump bug 701. Symptom: The creation of a hardlink pointing to the root group "/" causes h5dump to display it as a link pointing to itself.
Cure: the root group was not being inserted in the table that keeps track of object names and links.
Added a test for this in the test generation program, the creation of a hardlink to the root
the linkval buffer, per Elena and Frank's suggestions while revising
the documentation. Added error checking using this size, as well as a
couple of tests.
Tested on juniper, kagiso, and sol.
h5diff: print a message of "not comparable" in a case where the relative error
compare is not possible, due to the denominator being zero. Modified
the test file generator program to include a example for this and a new
test on the shell script
1) added a new parameter to the h5diff function diff_array that contains
the beginning position of the hyperslab, so that the total position in
the array is printed correctly when reading by hyperslabs.
2) added a new test to h5diff that reads and diffs by hyperslabs. The
test reads a 1GB dataset, from which a 1KB hyperslab was written with
differences .
3) added the generation of 2 files to the generator program to test the
h5diff hyperslab read.
4) changed the h5diff binary pre-generated file names to be more
descriptive (e.g, instead of file1.h5, made it h5diff_basic1.h5)
5) changed the name of the h5repack options text file to info.h5repack
Fixes for bugs 676, 228
676: both h5repack and h5diff use H5Dread. In the case of a "big"
dataset, use read/write by hyperslabs the same way h5dump uses. An
arbitrary value of 1GB was defined for "big", i.e, if the dataset is
greater than 1GB, then read/write by hyperslabs
228: use the file type in read/write by default. A new switch -n was
introduced if the user wants to use a native type, which was the
previous use by default.
Added a new test for h5repack that repacks a 1GB dataset
Tested: heping (serial, parallel), sol, copper
Add "use the latest format" support for dataspace object header encode/
decode routines and clean up format a bit for the latest format (new to 1.8.x
releases)
Remove storing 'perm' parameter for array datatypes in memory and the file,
and add test to make certain that if any user applications are attempting to
store them, we get some reports back. (Should be unlikely, since the RefMan
says that the parameter is not implemented and is unsupported).
Carry those changes into the tests, etc.
Clean up a bunch more compiler warnings.
Tested on:
FreeBSD/32 4.11 (sleipnir) w/threadsafe
Linux/32 2.4 (heping) w/FORTRAN & C++
Linux/64 2.4 (mir) w/enable-1.6-compat
and quote its arguments. Also checks for the 'socket' library on
Solaris.
If this patch passes the Daily Tests and makes the user happy, I'll
port it back to the 1.6 branch.
Tested on mir and sol.
File format is not stable, don't keep files produced!
Description:
First stage of checkins modifying the format of groups to support creation
order. Implement "dense" storage for links in groups.
Try to clarify some of the symbols for the H5L API.
Add the H5Pset_latest_format() flag for FAPLs, to choose to use the newest
file format options (including "dense" link storage in groups)
Add the H5Pset_track_creation_order() flag for GCPLs, to enable creation
order tracking in groups (although no index on creation order yet).
Remove --enable-group-revision configure flag, as file format issues are
now handled in a backwardly/forwardly compatible way.
Clean up lots of compiler warnings and other minor formatting issues.
Tested on:
FreeBSD/32 4.11 (sleipnir) w/threadsafe
Linux/32 2.4 (heping) w/FORTRAN & C++
Linux/64 2.4 (mir) w/enable-v1.6 compa
Mac OSX/32 10.4.8 (amazon)
AIX 5.3 (copper) w/parallel & FORTRAN
Code cleanup.
Description:
Removed argc and argv from the function arguments of h5tools_get_fapl() and
h5tools_fopen(). They were used to call MPI_Init() which was no longer
needed.
Tested:
heping (serial and parallel).
Since these examples need to follow filesystem paths, the Makefiles need
to create directories in the examples directory; added this to the
Makefile.am.
Tested on Windows, mir, juniper
Bug fixes.
Description:
There were MPI_init and MPI_finalize calls in the code of h5tools_fopen in
parallel mode. But if a non-MPI tool is invoke to open a non-existing
file, it tries to open the non-existing file with different VFD and
eventaully came to try with the MPIO or the MPIPOSIX vfd, then it would
try to do MPI_Init which would fail in the MPI environment if the a.out
was not launched by MPI properly.
Solution:
MPI_Init and MPI_Finalize in general should be called by the MPI application,
not called by a library subroutine as in the manner that was done here.
Removed the MPI_init and MPI_Finalize calls. Used MPI_Initialized to
verify if this has been launched as an MPI application in the proper
manner before attempting to use the MPIO or the MPIPOSIX VFD to open
the file.
Tested:
In tg-ncsa parallel, where it had failed explicitly and also in Heping,
using both serial and parallel mode.
Users can create external links using H5L_create_external(). These links
point to an object in another HDF5 file. Users can alter the behavior of
external links or create new kinds of links by registering callbacks
using the H5L interface.
Added tests, tools support, etc.
Also a number of other, minor changes have been made (some restructuring of
the H5L interface, for instance).
Additional documentation and examples are forthcoming.
"make check-vfd" will now run all tests in the test directory with different
file drivers (at least, all of those tests that use the testing framework's
FAPL). Tests that fail will be skipped.
This is not a perfect fix, but is better than nothing.
Along with this change, check-vfd should be added to the Daily Tests.
1. changed the -F flag option names to "BE and "LE" for big and little endian
2. added a more verbose usage message for these options
3. add a new test
4. add a make clean instruction to *.bin
bug fix
calling h5tools_get_fapl running the mpio driver caused H5FD_pl_copy to
fail silently in some conditions. a MPI call was made before MPI_Init.
solution: corrected the MPI call to be made after MPI_Init and added error return
conditions to H5FD_pl_copy and h5tools_get_fapl
tested on copper parallel, mir, shanti
new feature
Description:
added support for h5dump to dump binary data using the file type format
added one test to the test script that tests this
Solution:
Platforms tested:
mir
shanti
copper
Misc. update:
Code cleanup
Description:
Trim trailing whitespace in Makefile.am and C/C++ source files to make
diffing changes easier.
Platforms tested:
None necessary, whitespace only change
new feature. h5dump output of binary data
Description:
a new switch -b FILE_NAME that dumps the contents of memory data to file FILE_NAME in binary form
new program binread.c that reads the contents of this file and outputs it to stdout
added a test for the h5dump shell script that does a run of -b
the binread.c program reads the data used in this run, usage is ./binread FILE_NAME
Solution:
Platforms tested:
linux
solaris
AIX
Misc. update:
Configuration feature
Description:
'make install' now tests both static and shared libraries if both are installed.
Solution:
Previously, shared libraries were only tested when static libraries were not installed.
Also cleaned up line in commence.am that was including HL library in all Makefiles.
Platforms tested:
mir (Makefile change only)
Bug fix - bugzilla #552
Description:
On Cray X1, trying to use : as an argument confused the system.
Solution:
Added a test in configure to see if : as an argument is bad.
If so, skipped the test.
Platforms tested:
mir, Cray X1 (change to configure only)
Bug fix.
Description:
The ${TR}, though avoid the error, is inconvenient. It is needed
because configure.in use the char range in the style of 'a-z'.
The other style of '[a-z]' is more commonly accepted by all tr
but autoconf tends to strip away [], making the syntax rather
clumsy.
Solution:
Learned from autoconf that it avoids the use of character range
by just spell all the letters out. Changed our tr commands to
use those variables defined by autoconf. Also removed the
definition of ${TR} since it will cause inconsistancy when
autoconf also use plain 'tr' in its generated code.
The Makefile.in are changed because the elimination of ${TR} from
configure triggered its removal from all Makefil.in. That is okay
because ${TR} is not used at all in Makefile.
Platforms tested:
h5committested. (sol failed to connected). also tested in shanti
using both /usr/ucb/tr and /bin/tr (the bad one before.)
Misc. update:
Updated both INSTALL and RELEASE files.
new feature
Description:
modified the test case for region points, so that there is not an ordered sequence of points that differ, but one with gaps
Solution:
Platforms tested:
linux
Misc. update:
new feature
Description:
added support for the printout of dataset region references differences
added a new test for this
merged the h5diff generator of test files into a single file
Solution:
Platforms tested:
linux 32, 64
solaris
Misc. update:
Several bug fixes
Description:
Added config file for Cray X1 (previous file was misnamed)
Simplified some code in hyperslab.c test that seemed to have been
confusing compiler on Cray X1.
Fixed typo in config/commence.am
Cleaned up hl/src/Makefile.am
Solution:
All four fixes should be straightforward. The failure on Cray was
very difficult to debug, but involved arithmetic errors.
This change seems to fix it.
Platforms tested:
heping, copper, sol, some Cray X1 (more testing when system comes back up)
Anti-feature
Description:
Revert changes to H5G_stat_t struct, to make it compatible with the 1.6.x
branch again. The information that was added to the H5G_stat_t struct will
be reported through other API routines.
Platforms tested:
FreeBSD 4.11 (sleipnir) w/C++
Linux 2.4/64 (mir) w/C++ & Fortran
Solaris 2.9 (shanti)
new feature
Description:
1) separated the HL library into "public" and "private" header files, with the same caracteristics as the basic library
2) added the public headers to hdf5.h (with a conditional include macro, defined in configure.in)
3) added the path to HL in all Makefile.am 's , because of the inclusion in hdf5.h
Solution:
Platforms tested:
linux 32, 64
AIX
solaris
with fortran and c++
(one packet table example fails)
Misc. update:
new feature
Description:
added the printout of the compression ratio for filters in h5repack, after the filter name, obtained with H5Dget_storage_size, before and after applying the filter
Solution:
Platforms tested:
linux
solaris
AIX
Misc. update:
bug fix
Description:
the percent error calculation in h5diff using double precision floating point were causing different results
on the release and debug versions of Visual Studio version 6, due to a compiler bug
Solution:
used single precision (float)
Platforms tested:
windows
linux
solaris
AIX
Misc. update:
bug fixes
Description:
h5dump/h5ls were not displaying long doubles correctly
Solution:
1) the print datatype functions were incorrectly testing for the valid return value from H5Tequal,
(TRUE), causing the display of an incorrect name of a dataype in error cases from H5Tequal
2) h5tools_print_str did not have a case for native long double
3) added a file generator for a long double dataset
4) added one script test for the long double data (commented , some sytems don't have a native long double match, and the output differs)
5) added a vms file and h5dump script test
Platforms tested:
linux 32, 64
solaris
AIX
Misc. update:
Bug fix
Description:
Previous checkin did a bad thing; 'make clean' failed in example directories.
Solution:
Fixed commence.am so that examples no longer break, and fixed a mistake
in conclude.am.
Platforms tested:
heping (minor makefile change)
Misc. update:
bug fix
Description:
percent relative error was done using integer arythmetic; use floating point instead
added the case for unsigned long long integer to float conversion
Solution:
Platforms tested:
linux (32,64)
AIX
solaris
Misc. update:
Bug fix
Description:
make check-clean didn't clean results of example tests
Solution:
Fixed Makefiles so that check-clean recurses into example directories.
Also a little Makefile cleanup.
Platforms tested:
mir, modi4, heping, copper
bug fix
Description:
1) added a more explainative usage message
2) the percent relative error for the integer type (division) was being done using integer arythmetic; use floating point arythmetic instead
3) added a new test for integer percent
Solution:
Platforms tested:
linux (32,64)
AIX
solaris
Misc. update:
bug fix
Description:
the compare check for the datatype sign was not done in the correct place, causing invalid
comparisons to be made
Solution:
put it on the correct place
Platforms tested:
linux 32, 64
AIX
Misc. update:
bug fix
Description:
1) the compare flag test was not being put in a correct place, making comparisons attempts that were not supposed to be done
2) some duplicate warnings were being made
Solution:
eliminate the duplicate warnings, put the if compare flag on the correct place
Platforms tested:
linux 32, 64
solaris
Misc. update:
bug fixes
Description:
1) the option logic for the print of long types was done incorrectly (extra lines of code that were not supposed to be there)
2) the print of loong long types was incorrect
Solution:
1) removed the incorrect code
2) made a long long cast on the printf call
Platforms tested:
linux (32 and 64)
solaris
Misc. update:
bug fix
Description:
long long type was being incorrectly printed
Solution:
added a long_long cast to print function
Platforms tested:
linux
Misc. update:
bug fix, new features
Description:
when comparing links , the output for the number of differences found was not being done
Solution:
print it
add 3 more tests that test the output of differences for 1) groups 2) datatypes 3) links
Platforms tested:
linux
Misc. update:
Code cleanup
Description:
Check in some of the code cleanups from working on the external link
support. (This doesn't include any of the external link features)
Platforms tested:
FreeBSD 4.11 (sleipnir)
Mac OSX.4 (amazon)
Linux 2.4
bug fix
a call to sprintf was giving incorrect output in the system Fedora Core 4 with gcc 4.0
(not supported by us, but user reported)
Solution:
the call was using the same buffer for source and destination variables, used different ones
Platforms tested:
linux (mir)
solaris (sol)
Misc. update:
Bug fix
Description:
Fortran type generation was broken in two ways. Fixed both.
Solution:
Firstly, there were a couple of path problems. Fixed a typo and
specified the full path of a file.
Secondly, the dependencies weren't right when building with HDF5-specific
commands (make lib, make check-s, etc.). Tweaked dependencies
to fix the problem.
Platforms tested:
mir, modi4, sleipnir
Configure feature
Description:
Added 'make trace' target.
Solution:
Added tracing to 1.7. This was done automatically in 1.6, but left out
of 1.7 until now (oops!).
Tracing in 1.7 only happens manually, when the user types 'make trace.'
Tracing automatically requires more framework than it's worth.
I also fixed a couple of tracing bugs and ran trace.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Before this checkin, 'gmake check-s' would fail if there was a file in
the current directory named 'check-s'.
This is fixed under gmake (not sure how to fix for other makes).
Solution:
check, progs, install, etc. are what gmake calls "phony" targets,
which means that no file should be created. These targets can be
specified by a line of the form
.PHONY: check progs install ...
Automake adds this line for targets it knows about, but HDF5 has a
lot of custom rules. This checkin adds a .PHONY line for those rules.
I believe that only gmake recognizes the .PHONY line (at least, pmake
doesn't seem to), but a partial solution is better than none.
This error should occur very rarely anyway (the user has to manually
create files with names like 'build-check-s' or '_test').
Platforms tested:
mir, sleipnir, modi4
Cleanup.
Description:
Removed reference to H5_HAVE_VSNPRINTF and the corresponding abort
since we do not use the home-grown potentially memory wacking version
any more.
Platforms tested:
heping.
Misc. update:
Bug fix
Description:
Correct use of H5Gget_objinfo() which recent compact group checkins
exposed: we were attempting to follow dangling soft links.
Solution:
Don't follow links for H5Gget_objinfo() when initializing object tables
for h5dump.
Platforms tested:
Solaris 2.8 w/64-bit enabled
Linux 2.4
FreeBSD 4.11 (sleipnir)
New feature
Description:
Check in baseline for compact group revisions, which radically revises the
source code for managing groups and object headers.
WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!!
WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!!
This initiates the "unstable" phase of the 1.7.x branch, leading up
to the 1.8.0 release. Please test this code, but do _NOT_ keep files created
with it - the format will change again before the release and you will not
be able to read your old files!!!
WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!!
WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!! WARNING!!!!
Solution:
There's too many changes to really describe them all, but some of them
include:
- Stop abusing the H5G_entry_t structure and split it into two separate
structures for non-symbol table node use within the library: H5O_loc_t
for object locations in a file and H5G_name_t to store the path to
an opened object. H5G_entry_t is now only used for storing symbol
table entries on disk.
- Retire H5G_namei() in favor of a more general mechanism for traversing
group paths and issuing callbacks on objects located. This gets us out
of the business of hacking H5G_namei() for new features, generally.
- Revised H5O* routines to take a H5O_loc_t instead of H5G_entry_t
- Lots more...
Platforms tested:
h5committested and maybe another dozen configurations.... :-)
Bug fix/feature
Description:
Added support for -shlib in h5fc and h5c++.
Made check-install use -shlib when only shared libraries have been installed.
Solution:
h5fc and h5c++ didn't recognize -shlib. Stole code from h5cc to link against
shared libraries.
When static libraries are disabled, the examples Makefiles will automatically
use the -shlib option to link against shared libraries. Thus,
--disable-static and make check-install should work together.
Platforms tested:
heping(disable-static, enable-static, fortran, c++), modi4 (disable-static, fortran, c++, parallel, enable-static)
Bug fix
Description:
Failed parallel tests now cause make to exit with an error.
Solution:
Edited config/conclude.am to throw an error if parallel test programs fail.
Platforms tested:
heping, modi4
bug fix
Description:
an assertion after the search for objects was saying that the number of
objects in file should be > 0
removed it, since there can be a case where the number of objects is 0.
in this case this was found by a case where zlib was not present and the output file
was not written any objects to
note: this was only detected on the windows batch files, that do not have a conditional
condition to not run tests when a filter is not present
Solution:
Platforms tested:
linux
Misc. update:
Bug fix
Description:
Changed configure.in to use an environment variable TR to set the path
to the tr utility.
Solution:
There are two kind of tr on Solaris with slightly different syntax.
HDF5's configure relies on the "standard" tr. Traditionally, HDF5ers
have needed to make sure that the "right" tr was found before the
wrong one in their path; now they can use an environment variable.
Platforms tested:
mir, shanti, sol
Misc. update:
Forgot to update release notes. Off to do that now.
Makefile bug fix
Description:
Previously, automake didn't output rules to build perform/mpi-perf or
the test/gen_* programs.
Now these can be built by typing 'make mpi-perf' (or 'make foo') or by
configuring with --enable-build-all.
Solution:
Automake doesn't like having rules for programs it doesn't build. Tricked
it by having these programs built "sometimes"--whenever the user enables
--build-all. This should be used mostly for testing and to ensure that
these helper programs compile.
***IMPORTANT***
These programs do *not* currently compile. When --enable-build-all is used
(not the default), gen_new_fill fails because it uses an old API. This is
an existing "bug" that has simply been exposed by this checkin.
Platforms tested:
sleipnir, modi4, sol
Misc. update:
bug fix.
Description:
When a parallel test script test fails, make would continue because the
way it was setup inside a for loop. Fixed it by issuing an exit 1 inside
the loop.
There was also a typo error in the newer command comparision that it
must be $${chkname} in order to be valid. Also, the test script itself
was not checked in the newer lists. All fixed.
Platforms tested:
h5committested and also hand tested in heping pp mode.
New feature.
Description:
Added the time command to the make check target to report time usage
of the execute of each test and test scripts. This gives us some idea
how long each test takes and some vague idea it is compute bound or
not.
powerpc-ibm-aix5.x:
Change $RUNPARALLEL default setting to allow it being invoked by the
time command.
Platforms tested:
h5committested.
Feature
Description:
Added H5_CFLAGS, etc. to 1.7 branch.
Now compilation flags can be put in H5_*FLAGS and they'll be used when
building hdf5 but not in h5cc.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
