- Revise shared Fortran library disabling scenarios in configure
- Improve configure output summary
Description:
Shared Fortran libraries are not supported on Mac, but were being
disabled by configure in a way that also forced the C libraries
to be static-only. This has been fixed, so now only shared Fortran
is disabled while shared C can remain.
This prompted two additional changes:
1. While working on the check that addresses whether or not
shared Fortran libraries are allowed, removed old and no
longer needed check(s) that disable shared Fortran
libraries with HP, Intel 8, PGI, and Absoft compilers.
(Essentially, Mac is the only situation in which Fortran
shared are disabled by configure.)
2. Having two different states of libraries (i.e. shared C
library with static-only Fortran library) was not apparent
in the configure summary, which labeled all libraries as
either shared and/or static. I've added lines to both the
C++ and Fortran output sections to list shared/static-ness
of these libraries specifically.
Additionally, I've made sure that the new --enable-unsupported
configure option correctly overrides configure if it tries to
disable a shared library.
Tested:
jam, fred, & h5committest
Corrected use/name of source folder aliases.
Duplicated FindMPI.cmake so that non-c++ compiler is found first (recommemded commands did not work).
Tested: local linux with mpich
Improve configure's large-file support control.
Description:
Modified configure to now attempt to add defines necessary for
supporting largefiles on all systems, instead of solely on linux. This
is in response to user requests to enable largefile support on Solaris
by default, as well as to give extra control on AIX (instead of just
jamming the necessary flag into the config files).
The old --enable-linux-lfs flag has been removed in favor of the
--enable-largefile flag (enabled by default), which can be used on all
platforms.
On systems where large files cannot be supported in this manner,
configure will report as such.
Tested:
h5committest
AIX (NCSA's blue_print machine)
duty, liberty, and linew.
Autotool Upgrade / Libtool Bug Fix
Description:
Updated autotools referenced in bin/reconfigure as follows:
Autoconf 2.64 --> Autoconf 2.65
Automake 1.11 --> Automake 1.11.1
Libtool 2.2.6a --> Libtool 2.2.6b-mcg
The referenced libtool version is a custom version of 2.2.6b. It
has been tweaked to fix a bug in libtool that occurs
when using PGI 10.0 compilers. A check incorrectly categorizes
the C++ compiler as version 1.0 instead of 10.0, and the link
line is subsequently set up incorrectly and fails to compile.
A patch has been made available and will be included in the next
release of libtool, but in the meantime I've applied the patch to a custom
installation as indicated above. This bin/reconfigure now references
the custom installation, and the resulting configure script will correctly
categorize the PGI 10.0 C++ compiler.
Ran bin/reconfigure to regenerate configure and makefiles.
Tested:
jam and amani with PGI 10.0 compilers.
h5committest
Bring back changes from Coverity session on 1/15/10:
r18111:
Fix Coverity issue #130: make certain that the cache gets freed on error.
r18112:
Fix Coverity issue #43 by making cache testing calls protected by 'pass'
variable.
r18113:
Fix Coverity issue #129 by releasing the cache on error.
r18115:
Coverity #45 fix: patched an error check in H5Screate_simple to prevent future dereferencing of a NULL point.
Added a verification in test/th5s.c.
r18116:
Fix Coverity issue #43 by releasing cache on error.
r18117:
Coverity #362,363 by adding HGOTO_DONE, freeing allocations and associated changes. REsolving coverity results #364-368, 369, 370-372, 377, 379, and 380.
r18118:
Fix Coverity issue #42: assert that cache & test specification pointer are
valid.
r18122:
Coverity #362,363 by adding HGOTO_DONE and freeing allocations. This also takes care of #357,358.
r18123:
Coverity #359-361, 373-376: Added HGOTO_DONE(FAIL) statement after checking allocation for NULL. Verified allocation is freed in done block.
r18128:
Fixed coverity issue #10 -- removed dead code.
Tested on:
Mac OS X/32 10.6.2 (amazon)
The mixed use of RUNTEST (original) and RUNTESTS (new) caused
confusion. E.g., the timings in test/ was still using the old
$RUNTEST. It made more sense to use $RUNTEST which is used
by the dejagnu feature of automake. So, I changed all
$RUNTEST or $RUNTESTS to $RUNEXEC.
config/commence.am & config/conclude.am are the two files
that got changes. Also fixed an error in test/Makefile.am.
The rest are changed by bin/reconfigure.
Tested: h5committested.
Changed the link type definitions to match the changes made in the source.
- ! H5L_LINK_SOFT_F - Soft link
- ! H5L_LINK_EXTERNAL_F - External link
- ! H5L_LINK_ERROR _F - Error
+ ! H5L_TYPE_HARD_F - Hard link
+ ! H5L_TYPE_SOFT_F - Soft link
+ ! H5L_TYPE_EXTERNAL_F - External link
+ ! H5L_TYPE_ERROR _F - Error
Tested: jam (intel)
CFLAGS overhaul
Description:
Modified the way configure handles CFLAGS.
(note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS).
1. The configure process will now always preserve a user's CFLAGS
environment variable setup. Any additional flags necessary for compilation
added at configure time will be passed into the Makefiles as AM_CFLAGS,
which is an automake construct to be used in addition to CFLAGS.
This will allow a user to have the final say, as CFLAGS will always appear
later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS
during make will no longer completely erase all flags set by configure,
since they're maintained in AM_CFLAGS.
2. Additionally, where possible, flags previously being assigned directly
into CFLAGS (and thus propagating into h5cc) have now been redirected into
H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into
the h5cc wrapper script as well.
*Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the
Makefiles. Complete description of changes and build process will be
included in a Configure Document that Elena and I are working on.
3. Removed unsupported config files. This includes:
config/dec-osf*
config/hpux11.00
config/irix5.x
config/powerpc-ibm-aix4.x
config/rs6000-ibm-aix5.x
config/unicos*
4. Modified configure summary to display additional values. Specifically,
appropriate AM_* variables are being shown, as well as H5_FCFLAGS and
H5_CXXFLAGS, which were for some reason not already present.
Tested:
- H5committest
- Tested on all THG / NCSA machines, using several combinations of the more
prominent configure options (c++, fortran, szip, threadsafe, parallel,
et cetera). (Thanks to Quincey for rysnc testing setup!)
- With regards to new automated testing, anything *necessary* for
compilation will be caught by the daily tests as it stands now. (i.e.,
if LDFLAGS is not properly set when szip is used, linking will fail).
Additionally, with regards to which flags get into h5cc, if any
*necessary* flags have been improperly removed, then daily tests should
fail during make installcheck. Additional machine-specific desired
behaviors and/or checks may have to be set up separately within the
daily tests, so this is something to work on.
Bug 1652 - h5lget_info_by_idx_f missing/broken functionalit
* added returned val_sel, link_type and address that were missing
In the process, fixed the integer type in H5lget_info_f for address and val_sel
* wrote test for val_sel, address, and link_type returned values
* to check address values added h5Oopen_by_addr_f function and test program.
Tested: smirom (pgf90/pgcc, ifort/icc)
linew
jam (gcc/g95)
Updating autotools
Description:
Installed new autotools and used them to reconfigure HDF5.
- Automake upgraded to 1.11
- Autoconf upgraded to 2.64
- bin/reconfigure script edited to use new versions (on jam), and
run to generate new configure script and Makefile.in's.
- configure.in script edited to add "_cv_" to all AC_CACHE_VAL strings
(in order to comply with new autoconf standard).
Tested:
Tested on machines jam, smirom, liberty, linew.
Tested w/ features c++, fortran, parallel.
Tested w/ compilers gcc, pgcc, icc.
Further testing via Daily Tests should catch any other outliers. Upon
passing DT's, I'll propogate the new tools into 1.8, hdf4, et cetera.
Added filename argument to file_space routine to avoid conflicts of the files when running fortranlib_test_1_8.f90 and fortranlib_test.f90 at the same time (i.e. when running the tests in parallel).
tested: smirom (ifort, pgf90, g95, gfortran), linew
H5D_CHUNK_CACHE_NSLOTS_DEFAULT_F
H5D_CHUNK_CACHE_NBYTES_DEFAULT_F
H5D_CHUNK_CACHE_W0_DEFAULT_F
to
H5D_CHUNK_CACHE_NSLOTS_DFLT_F
H5D_CHUNK_CACHE_NBYTES_DFLT_F
H5D_CHUNK_CACHE_W0_DFLT_F
to get under the 31 limit for variable names
- Updated bin/reconfigure to use latest version of automake (1.10.2).
Re-generated Makefile.in's by running bin/reconfigure.
- Added libtool version numbers to c++, fortran, hl, hl c++, and hl fortran
libraries.
Tested:
jam, liberty, smirom
Bug Fix
Description:
Fixing BZ #1381. The --includedir=DIR configure option, which is used
to specify the installation location of C header files, did not work
correctly as the path was hard-coded in config/commence.am. I'm presuming
this is because an older version of automake didn't know where to put
c header files. In any case, removing this line now defaults the includedir
to the same directory that it is currently hard-coded to, and also fixes
the configure flag to allow customization of this value.
Tested:
jam, liberty
the way h5ls prints types, it starts searching for NATIVE types first. One solution would be h5ls not to detect these native types, using for example the same print datatype function that h5dump does, that would make the output look the same on all platforms ("32-bit little-endian integer" would be printed instead). Drawback, this "native" information would not be available. Other solution is to have not one but 2 expected outputs and make the shell script detect the endianess and compare with one output or other
tested: h5committest
Description:
- Remove need to set LD_LIBRARY_PATH when using shared szip library.
- Libtool 2.2.6a is now used to generate libraries.
- 'make check install' dependency bug is fixed, and should no longer
break the build.
- removed hard coding of shell in config/commence.am, as this causes
problems on Solaris with the new version of libtool.
- RELEASE.txt with appropriate changes.
Tested:
- kagiso, smirom, linew (merged from 1.8, pretty quick tests)
Changed the error output formatting so that the
test status writes to standard out looks correct when using the
sun compiler (it did not correctly tab the output).
Uninstall target had non-existant file to remove; error_handler module triggered
a race condition for parallel make with Intel and PGI compilers, therefore we
removed the module and created a subroutine instead.
Platforms tested: kagiso with GNU, Intel and PGI compilers.
Added code to remove module files when make clean
Description:
The module files were not being removed when make clean
and caused compiling errors. fixed.
Made reporting of the test status global by handling the output
via a module. Cleaned-up output to the terminal.
Description:
Put writing the test status as a call to a subroutine
instead of on a per account basis.
Added the dependency of compiling in the correct order
in the Makefiles for use of the Module.
Description:
The fortran Makefile.am used HDF_FORTRAN to indicate it is part of the
Fortran API source so that conclude.am will give fortran api prefix in the
test output. The symbox HDF_FORTRAN is also used in configure for a different
purpose (indicated --enable-fortran). They conflicted.
Similar problem for the symbol HDF_CXX.
Solution:
Changed all the involved Makefile.am to use "FORTRAN_API" instead. It is
a more appropriate name. Same for CXX_API.
Along the way, discovered that the Makefile.am of hl/fortran/test and
hl/cxx/test did not have those symbols at all. Added them in.
Platform tested:
Kagiso only. It is a trivia change.
Cleaned up unused code (i.e. commented out) and removed extraneous output to standard out.
Tested:
N/A - No critical executable source lines were modified, only comments and write statements.
Improvement.
Description:
src/libhdf5.settings was the initial configure summary and is installed.
Then configure is changed to dump a summary of the configure settings to
the output and also append it to src/libhdf5.settings. That created
two different output formats and duplicated information. This is the
initial attempt to clean up this confusion and unify the output format.
It is decided to use the src/libhdf5.settings template as the unified means.
This requires more macros symbols be defined. The following symbols are
all related to generating the src/libhdf5.settings file.
AC_SUBST(EXTERNAL_FILTERS)
AC_SUBST(MPE) MPE=no
AC_SUBST(STATIC_EXEC) STATIC_EXEC=no
AC_SUBST(HDF_FORTRAN) HDF_FORTRAN=no
AC_SUBST(FC) HDF_FORTRAN=no
AC_SUBST(HDF_CXX) HDF_CXX=no
AC_SUBST(CXX) HDF_CXX=no
AC_SUBST(HDF5_HL) HDF5_HL=yes
AC_SUBST(GPFS) GPFS=no
AC_SUBST(LINUX_LFS) LINUX_LFS=no
AC_SUBST(INSTRUMENT) INSTRUMENT=no
AC_SUBST(CODESTACK) CODESTACK=no
AC_SUBST(HAVE_DMALLOC) HAVE_DMALLOC=no
AC_SUBST(DIRECT_VFD) DIRECT_VFD=no
AC_SUBST(THREADSAFE) THREADSAFE=no
AC_SUBST(STATIC_SHARED)
AC_SUBST(enable_shared)
AC_SUBST(enable_static)
AC_SUBST(UNAME_INFO) UNAME_INFO=`uname -a`
The src/libhdf5.settings.in has CONDITIONAL's added to it too. The
untrue conditions turned into a "#" and these lines are cleaned by the
post processing script.
Platform tested:
h5committest on kagiso, smirom and linew.
Description:
There were a number of small tweaks we needed to make to add the new fortran_1_8 code on Windows. We create new project files, add new source to them, add the test to our test suite, and fix a few typos in the Windows-specific source code.
Tested:
VS2005 on WinXP
* test passing integer constant to subroutine
Description:
! -- CHECK PASSING AN INTEGER CONSTANT IN DIFFERENT FORMS --
! 1) call by passing an integer with the _hsize_t declaration
! 2) call by passing an integer with the INT(,hsize_t) declaration
! 3) call by passing a variable with the attribute hsize_t
This check-in should address Fortran failures on liberty and smirom.
Platforms tested: kagiso with Intel, smirom with g95 -fPIC, liberty with gfortran42
Description: Applying update to autotools that was applied to 1.8 a couple
of weeks ago to the trunk.
Updated bin/reconfigure script to reflect the new versions of
libtool and automake in the /home1/packages/ directory.
Rearranged configure.in script. When using libtool 2.2.2, the
libtool script doesn't generate until later in the configuration
process, so I had to move a test that parsed through the libtool
script to a point after where it was actually being generated.
Ran libtoolize on the project, and ran bin/reconfigure to
regenerate configure and Makefile.in's throughout.
Tested: kagiso, smirom, linew (h5committest)
Currently only one test (dense attributes) is failing. It looks like C library problem and we
have a similar bug report in Bugzilla: when dense storage is used, attributes are not written
to the file; somehow similar C test doesn't expose the problem while Fortran test does.
Platforms tested: linew, kagiso with g95 and PGI
Platforms tested: kagiso with PGI compilers, linew, smirom with GCC and g95 compilers;
some tests and function calls are commented out with !EP string; we will be
working on it.
Platforms tested: kagiso with g95 and Intel compilers; more testing will be done after checking in a fresh
copy from the trunk. New code itself was tested with all Fortran compilers available at THG
Add work-around to allow reading files that were produced with a buggy
earlier version of the library, which could create objects with the wrong
object header message count. There is now a configure flag
"--enable-strict-format-checks" which triggers a failure on reading a file
with this sort of corruption (when enabled) and allows the object to be read
(when disabled). The default value for the "strict-format-checks" flag is
yes when the "debug" flag is enabled and no when the "debug" flag is disabled.
Note that if strict format checks are disabled (allowing objects with
this particular kind of corruption to be read) and the file is opened with
write access, the library will re-write the object header for the corrupt
object with the correct # of object header messages.
This closes bugzilla bug #1010.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
Skip one of the tests in flush2.c since it looks like VMS system
flsuhes the file anyway (like on Winodws with DLLs)
Renamed files family*.h5 that are used in backward compatibility
testing to have only one '.' in a file name, otherwise VMS system
becomes confused and test fails.
Cleaned up the only test (Fortran multi-file test) that is failing on
VMS (C counterpart passesa).
Added new script to facilitate the build process on VMS
Updated MANIFEST
PLatforms tested: VMS server, kagiso and linew (minor changes)
Finish deprecating last H5G symbol (H5G_obj_t) - yay!
Lots of misc. library fixes to remove confusion between links and
objects. The tools could still use another pass, to remove h5trav_type_t type
and make the correct distinction between links & objects.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
AIX/32 5.3 (copper) w/FORTRAN, w/parallel, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Description:
We are porting Fortran to 64-bit Windows, and need to make many syntactical changes to bring the code up to date. We now go back to using "!DEC$" rather than "!MS$" in our "ATTRIBUTE" code. Also, the naming conventions for mixed language is inconsistent from 32- to 64- bit Windows. To make up with this, we use the "decorate" flag. We also needed to change the "calling convention" in project settings from "CVF" to "default".
Also other minor cleanups on project files.
Tested:
32-bit: VS.NET and VS2005
64-bit: VS2005
Add --enable-deprecated-symbols configure option, to allow users to
remove deprecated public API symbols at configure time.
Add bin/make_vers script to bin/reconfigure actions.
Run bin/reconfigure to regenerate autotool components.
Tested on:
Mac OS X/32 10.4.10 (amazon)
FreeBSD/32 6.2 (duty)
Linux/32 2.6 (kagiso)
2) Removing configuration of c++/src/H5cxx_pubconf.h file.
Reasoning: the additional pubconf file caused compilation complications, this is cleaner.
Tested: kagiso, smirom
Description: added new configuration to generate a pubconf file
in the c++/src directory, H5cxx_pubconf.h. When C++
compiler recognizes 'offsetof', the macro
H5_CXX_HAVE_OFFSETOF is defined in the new
pubconf file.
tested: kagiso, smirom
Description: a new configure flag has been created that will now set a macro
in the test/Makefile. The flag is with-default-vfd=. When set to
a virtual file driver (e.g. "--with-default-vfd=sec2"), the macro
DEFAULT_VFD will hold this value.
Tested: kagiso, smirom, linew
file size from MPI_File_get_size. Bypass this problem by replacing it with
stat. Add an option --disable-mpi-size in configure to indicate this function
doesn't work properly. Add a test in testpar/t_mpi.c, too. If it returns wrong
file size, print out a warning.
Tested on kagiso (parallel) because already tested the same change to v1.6 on
several platforms (kagiso, cobalt, copper, and sol).
