bug fix.
Description:
When a parallel test script test fails, make would continue because the
way it was setup inside a for loop. Fixed it by issuing an exit 1 inside
the loop.
There was also a typo error in the newer command comparision that it
must be $${chkname} in order to be valid. Also, the test script itself
was not checked in the newer lists. All fixed.
Platforms tested:
h5committested and also hand tested in heping pp mode.
New feature.
Description:
Added the time command to the make check target to report time usage
of the execute of each test and test scripts. This gives us some idea
how long each test takes and some vague idea it is compute bound or
not.
powerpc-ibm-aix5.x:
Change $RUNPARALLEL default setting to allow it being invoked by the
time command.
Platforms tested:
h5committested.
Feature
Description:
Added H5_CFLAGS, etc. to 1.7 branch.
Now compilation flags can be put in H5_*FLAGS and they'll be used when
building hdf5 but not in h5cc.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Disabled C++ shared libraries for Sun Workshop compiler.
Solution:
This bug only seems to happen when using the -xarch=v9 flag to compile in
64-bit mode, but disabling shared libraries entirely for this compiler is
an easier fix (I don't know how to detect 64 bit mode from the command line).
The framework for disabling shared libraries for other C++ compilers is
in place.
Platforms tested:
sol, mir, sleipnir, modi4
Bug fix/feature
Description:
Disabled shared libraries for a number of Fortran compilers that don't
support them.
This allows other compilers to support shared Fortran libraries.
Solution:
Added a conditional, SHARED_FORTRAN_CONDITIONAL, which is true if
Fortran supports shared libraries. It is set in configure.in.
Platforms tested:
mir, sleipnir, colonelk, heping
tidy up.
Description:
MPE option created *.clog file whenever it is executed in MPI.
The cleanup of *.clog files were done in individual Makefile.in.
Often, it is forgotten.
Solution:
Moved the cleaning of *.clog files to CHECK_CLEANFILES in commence.am
so that it is applied whenever check-clean is called.
Platforms tested:
heping pp using MPE.
Bug fixes
Description:
This checkin fixes an occasional error on kelgia on sol during distclean.
It also causes test scripts to depend properly on the programs they're
supposed to be testing.
Solution:
The kelgia bug was due to some files being cleaned by automake and manually.
Removed the manual cleaning in src/Makefile.am.
Test script dependencies now need to be specified manually, since the
makefile can't guess what they test from their name. Currently all test
scripts in a given directory have a single list of dependencies--this was
easy and seems to be sufficient.
These dependencies are listed in the SCRIPT_DEPEND variable in the Makefile.am.
Platforms tested:
heping, mir, modi4, sol
Misc. update:
minor tidy up.
Description:
Changed both test programs and test scripts to use the same suffixes
(.chkexe and .chklog). Changed from .log to .chklog to avoid running
into potential conflicts by other "things" (e.g., config.log).
Tested:
Heping.
Bug fix and improvement.
Description:
The test output were not displayed for parallel tests.
The serial tests output were always displayed whether the test was
actually ran this time or not.
Solution:
Moved the display of test output inside the target where the actual
tests are run.
Platforms tested:
Tested in heping using pp and fortran.
Bug fix and code minor cleanup.
Description:
The attempt to redirect stderr together to the log files were
done in the wrong order such that stderr output goes to where
stdout WAS. Fixed that.
Code minor cleanup--use shell variables to hold the name of the
log file and the test instead of generating them repeatedly. This
makes easier code reading, less crowded and avoid typos.
Only conclude.in is changed. The Makefile.in changes are all
derived from automake.
Platforms tested:
h5committested.
Makefile feature
Description:
'make check-clean' now cleans *.h5 files created by tests as well as
.log and .chkexe files.
Solution:
check-clean is now a separate target in its own right, which cleans less
than mostlyclean (check-clean < mostlyclean < clean < distclean).
Platforms tested:
mir, heping, modi4 (serial and parallel)
Feature: check-clean target
Description:
'make check-clean' cleans up output files from tests.
Solution:
Tests create foo.chkexe and foo.log files. Scripts create foo.chksh and
foo.logsh files. 'make check-clean' will clean these files up so that
the tests can be re-run.
Also suppressed some not-very-useful output of Makefiles when it would
echo commands.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Configuration feature
Description:
Serial test output is now stored in log files and printed when all tests
in a directory complete, or when a test fails. This should make test output
more readable and useful.
Also made changes to clean up ii_files directories that are created by some
C++ compilers/linkers.
Also fixed a few minor Makefile bugs.
Solution:
When serial tests run, their output is saved in *.log or *.logsh. While
running, tests only print when they begin and when they complete; their
more specific output (from the log file) is printed if the test fails or
when all tests have completed.
Comments welcome.
Platforms tested:
mir, modi4 (parallel and serial), copper, shanti
Bug fix
Description:
The ".chksh" file for a test script was being created in the "source"
location rather than the build location. This can cause problems when
multiple builds are running because "slower" machines will see the ".cshsh"
file from faster machines and will not run the test script as they should.
Solution:
Use 'basename' command to strip off the path of the script and create
the ".chksh" file in the build location.
Platforms tested:
FreeBSD 4.11 (sleipnir)
h5committest
bug fix.
Description:
-nt is not a universal option for the test command in all platforms.
The use of it in conclude.am cause some platforms to bark at the
Makefile generated.
Solution:
Created a command script bin/newer which tests if file1 is newer
than file2. Replace the "test file1 -nt file2" by
"newer file1 file2".
Platforms tested:
Tested in sol.
Bug fix
Description:
Fixed bugs that caused tests to be unable to find testhdf5.sh during
daily tests, and another that broke sol and shanti.
Solution:
When tests are run, their path is ./$testname .
When scripts are run, their path has no leading "./". Fixed.
Sol and shanti don't recognize the -e option for test, but they do know
-f. Fixed.
Also modified release notes.
Platforms tested:
mir, shanti, heping
Feature: tests now use parallel make and only run once
Description:
When make is invoked in parallel (using the -j option), several tests will
now be run simultaneously. This should speed up testing on a number of
systems.
When a test passes, it creates a foo.chkexe or foo.chksh file, which prevents
the test from running again unless the test or library changes.
Solution:
Most of the changes live in config/conclude.am. Added *.chkexe and *.chksh
files to the list of files to be cleaned at "make mostlyclean" time.
Parallel tests still run one at a time, but use the same make instructions
as serial tests.
Platforms tested:
mir, eirene, sleipnir, pommier, copper, modi4 (some errors occurred, probably
due to the test being run before updating hdf5. Will re-run tests after
checkin.)
bug fix
Description:
check-s and check-p were set as pre-requistics of test. They
would get executed in parallel if parallel make is used. This
could cause problems since serial tests are used to be executed
before parallel tests. It is not known if it is always okay to
run serial and parallel tests in simultantously.
Solution:
Change check-s and check-p as actions of the target test so
that they get executed sequnentially.
Platforms tested:
heping PP.
Added check-s and check-p targets.
Description:
Added check-s and check-p targets to 1.7 branch to match changes to 1.6
branch. Now parallel and serial tests can be run separately.
Platforms tested:
mir, modi4, copper
Description: Removed support for SRB driver
Solution: Removed or modified appropriate files; ran reconfigure
to regenerate Makefile.in and configure files.
Platforms tested: heping and shanti
Misc. update: ran bin/chkmanifest on heping
Configuration feature
Description:
Different Fortran compilers mangle function names in different ways
(upper case, lower case, adding underscores). To link between
Fortran and C functions, we need to know what a given function's
name is under a given compiler.
Solution:
Use autoconf's FC_WRAPPERS check to determine the Fortran
naming scheme and define the FC_FUNC_ macro to name our
functions (in H5f90proto.h). Removed references to
our old FNAME macro, as well as flags that indicated whether
function names were upper or lower case.
Platforms tested:
mir, pommier, modi4, copper, more
Bug fix
Description:
On some machines, $RUNSERIAL variable needs to be used to run
tests. Set $RUNTESTS (which is used for non-parallel tests) to
be $RUNSERIAL in configure.am.
Also, since I was updating all Makefiles.in anyway, I updated
commence.am to point to autotools installs in AFS instead of
those on heping.
Platforms tested:
mir, sleipnir, modi4, copper
Purpose:
"Bug fix"
Description:
Hardcoded Makefiles to use /bin/sh instead of letting configure
detect shell automatically. This is what v1.6 does, and avoids
problems on janus.
Platforms tested:
sleipnir, copper, modi4, mir
Feature - conditional compilation
Description:
SRB file driver and tests are now compiled only when SRB is enabled
(using --with-srb during configure).
Solution:
Added an automake conditional in configure.in, altered Makefiles.am in
src and test directories to depend on that conditional.
This should make a nice example for posterity to add conditionally
compiled sources.
Platforms tested:
heping (only configure change)
Purpose:
Added C++ wrapper for Packet Table API.
Description:
Added macro for high-level C++ library (LIBH5CPP_HL), which changes every
Makefile.in.
Added directories for high-level C++ library (though currently only Packet
Table API is supported).
Added both C++ source and tests.
Platforms tested:
sleipnir, mir, modi4
Misc. update:
Automake version upgrade
Description:
Upgraded automake version from 1.6.2 to 1.9.5.
Changed bin/reconfigure script to use automake 1.9.5.
Changed configure.in and Makefiles to use new FCFLAGS and FC variables
instead of FFLAGS and F9X.
Automake and configure should now do the lion's share of the work
supporting Fortran 9X; macros in acsite.m4 are now mostly unused (will
be cleaned later).
Altered how configure handles pmake; now root-level Makefile.in is
processed by bin/reconfigure to have a .MAKEFLAGS target, since
automake no longer allows us to define unused variables.
Configure now always checks for C++ compiler even if it is not
used, since automake thinks this is the Right Thing To Do and
will break otherwise.
Platforms tested:
Sol, copper, heping, mir, sleipnir, eirene, pommier, kelgia, modi4.
Removed GASS configuration and software packages associated with
it. The following software are no longer configurable.
checking for main in -lcrypto... yes
checking for SSL_get_version in -lssl... yes
checking globus_common.h usability... yes
checking globus_common.h presence... yes
checking for globus_common.h... yes
checking for globus_module_activate in -lglobus_common... yes
checking for main in -lglobus_gass_cache... yes
checking for main in -lglobus_gaa... yes
checking for main in -lglobus_gss... yes
checking for main in -lglobus_gss_assist... yes
checking for main in -lglobus_io... yes
checking for main in -lglobus_gass_transfer_assist... yes
checking for main in -lglobus_gass_transfer... yes
checking for globus_gass_open in -lglobus_gass_file... yes
Platforms tested:
h5committested (but copper was down.) tested in modi4 too.
Purpose:
Bug fix
Description:
modi4 dies during build with strange errors.
The root cause of these is a two-year-old hack in HDF5's libtool
script that only takes effect on IRIX.
Solution:
Edited the libtool hack (by editing ltmain.sh) to correct a bug in
the hack.
Also made sure that compiler-specific DEFAULT_LIBS are used
when linking.
Platforms tested:
sleipnir, copper, modi4, sol
Bug fix
Description:
pmake (on modi4, for instance) complains about undefined variables
if it is run without the -V flag, which turns those errors to warnings.
Solution:
Added test to configure.in to see if $MAKE will allow Makefiles
with undefined variables. If not, sets -V flag in AM_MAKEFLAGS.
Ensured that all custom make targets use AM_MAKEFLAGS.
Also defined all variables that caused errors in top-level Makefile.am.
This means that pmake can be used to build hdf5 *from the top level
only*. To run make from a subdirectory, still need to use -V flag
(or use make or gmake).
Platforms tested:
modi4, heping, copper, sleipnir
Purpose:
Bug fix
Description:
Parallel builds were breaking in tools/lib
Solution:
talign didn't realize it depended on libh5tools.la because its
dependencies listed the full path (../../tools/lib/libh5tools.la).
Changed this, and made similar changes in a couple of other
directories.
This checkin should also add the --foreign flag to every Makefile.in
Platforms tested:
sleipnir (minor change)
New feature
Description:
Add basic code for new B-tree implementation. They don't do much yet,
aren't hooked up to anything yet and the format may change, but I'd like to
start getting them into the daily tests.
Platforms tested:
FreeBSD 4.11 (sleipnir) w/parallel
Too minor to require h5committest
Bug fix
Description:
Found the permanant fix to automake/CVS dependency problem
Solution:
Added AM_MAINTAINER_MODE macro to configure.in.
Now automake will never try to regenerate Makefiles, Makefiles.in,
configure, H5config.h, etc. when they are out of date, nor will it
print any warnings.
Developers should be very very careful to use reconfigure script,
and can add --enable-maintainer-mode flag to configure on heping
to regenerate these files correctly.
Platforms tested:
heping sleipnir copper
Bug fix
Description:
Configuration files' timestamps were incorrect.
Solution:
Update Makefiles.in. Also added correct paths to autotools on heping,
so heping build should be able to re-generate configuration files even
if they are still broken.
Platforms tested:
sleipnir
Bug fix
Description:
Dependencies between configure files (aclocal, configure.in, configure,
Makefiles.am and .in) are still causing Makefiles to try to run autotools
during build.
Solution:
Committed all Makefiles.in to update their timestamps.
As a temporary measure, forcibly prevented automake from running
autotools during build by redefining the variables it uses.
Platforms tested:
sleipnir (No changes to Makefile content)
Bug fix
Description:
Different compilers use different flags to include Fortran module files
Solution:
Changed boilerplate to use configure variable rather than hardcoded -M flag.
Platforms tested:
sleipnir, sol, copper
Configuration feature
Description:
HDF5 now uses automake to generate Makefiles
Solution:
Makefile.in files are now generated from Makefile.am files.
To reconfigure (after chaning a Makefile.am or configure.in):
/bin/sh bin/reconfigure.sh
Platforms tested:
Many
Adding new 'jam' utility
Description:
New utility, plus changes to makefiles
Solution:
See http://hdf.ncsa.uiuc.edu/RFC/Jam
Platforms tested:
verbena (fortran,C++), arabica, hirdls (SGI Irix64)
Misc. update:
Manifest will be done in next checkin.
Updated the copyright notice--mostly by rearranging
some text to make them consistent.
Solution:
Platforms tested:
"h5committested"--sol is down, so, no SUn test.
Misc. update:
Bug Fix
Description:
The SUBDIRS macro is now defined as "" in the config/commence.in
file. We shouldn't have definitions of this macro before the
inclusion of config/commence.in.
Solution:
Placed all definitions of SUBDIRS after config/commence.in inclusion.
Platforms tested:
Modi4 (Small fix yet again).
Misc. update:
Purpose:
Bug Fix
Description:
Changes needed to make "pmake" work on Modi4.
Solution:
Needed to add some null macro defines in the commence.in files.
Needed to remove a dependence on LIBH5TEST in the fortran make
since LIBH5TEST isn't used in the fortran stuff.
Platforms tested:
Modi4 (small change)
Misc. update:
Purpose: New tool
Description: Pankaj created h5import tool long time ago. I am finally checking
the source code in for the 1.6 release.
Known problems: h5import test will crash if srcdir option
is used; will be fixed before the release.
Solution:
Platforms tested: vebena, arabica, modi4 were tested. h5import tests passed
I also tested on arabica with srcdir option to make sure that
there is a problem when srcdir is used. After that I disabled
h5import tests. Daily tests will build h5import, but will not run
h5import tests.
Misc. update:
Code Motion
Description:
Removal of HDF4 from the configure/Makefiles. This is a precursor to
the actual physical removal of the HDF4 tools from the HDF5 tree.
Platforms tested:
Arabica, Dangermouse
Purpose:
Bug fix
Description:
The "make depend" command wasn't propagating down into the tools/
directories.
Solution:
Added the "depend:" part to the Makefile in the tools/ subdirectory.
Platforms tested:
Linux
Purpose:
Adding new feature
Description:
Added gif2h5 and h52gif conversion utilities
Solution:
The utilites follow the framework built for the gif2hdf and hdf2gif
utilities for hdf4. The main files modified were those that read the
H5 file and those that write H5 file. In the future, if you wish to
continue with the framework and extend it to .png or some other fileformat
the main files to edit will be the gif reader and writer.
One point to note with h52gif. You have to specify the exact location of
the image and the palette that it links to. You can choose not to specify
a palette (uniform grayscale chosen in this case) but you must specify
image location. In the future, someone could edit the readhdf.c source
to enable the reader to parse the hdf file and select all images with
corresponding palettes.
Platforms tested:
modi4 , eirene , hawkwind , arabica , Ren (NT 4.0) , Personal box (win2k)
Bug Fix
Description:
For some reason, it was trying to cd to the examples/ and pablo/
directories to do a distclean. Only problem was, they aren't here.
Solution:
Removed those from the `for' loop.
Platforms tested:
Linux
Bug Fix
Description:
We were trying to build the talign test program before the library
was actually built.
Solution:
Moved talign test to the lib directory since it belongs with the
library anyway.
Platforms tested:
Linux
Fix
Description:
Left in the separate subdirectories fro the small programms.
Solution:
removed them and replaced with the misc/ subdirectory
Platforms tested:
Linux
Bug fix
Description:
h4toh5test was being installed because it was put in the PUB_PROGS
which is specifically for public programs to be installed.
Solution:
Moved it away from the PUB_PROGS list to the PROGS list.
Platforms tested:
eirene.
Purpose:
Fixing Makefile.in for compiling h4toh5test.c at the right option
Without including hdf4 lib, h4toh5test will not be generated.
Description:
Solution:
Platforms tested:
arabica
Feature Add
Description:
Added support for the h4toh5test program which needs to be
conditionally compiled in only if HDF4 is specified.
Platforms tested:
Linux
Bug fix
Description:
If TESTH5TOH4 or TESTH4TOH5 wasn't set, then it would mess up the
testing process by adding a ``#'' to the for statement (since
there was a line-continuation in the definition of the macro).
Solution:
Placed the macro expansions all on one line so that there's no
junk characters picked up by accident.
Platforms tested:
OSF1 (Gondolin)
new feature
Description:
h5ls was not tested
Solution:
Added a test script, testh5ls.sh, to give h5ls some tests.
Since the output from h5ls is sometime machine dependent (e.g.,
Datatypes), can not compare them with expected output. For now,
run it against various hdf5 binary files. If it exits with 0,
consider it passes.
Platforms tested:
IRIX64, eirene, arabica.
Bug fix
Description:
gmake check had been failing because of errors in the Makefile.
Solution:
Fixed it so that libtools.a got build first.
Platforms tested:
Eirene (Linux)
Adding Testing
Description:
Alignment when putting elements in a compound datatype can be
off.
Solution:
This was a bug which I'd fixed. Here's a program to exercise the
bug.
Platforms tested:
Linux
Purpose:
add h4toh5 converter tool
Description:
add flag h4toh5 and testh4toh5 in the Makefile.
Solution:
[details about the changes, algorithm, etc...]
[Please as detail as you can since your own explanation is
better than others guessing it from the code.]
Platforms tested:
test on eirene and arabica.
[machines you have tested the changed version. This is absolute
important. Test it out on at least two or three different platforms
such as Big-endian-32bit (SUN/IRIX), little-endian-32(LINUX) and
64-bit (IRIX64/UNICOS/DEC-ALPHA) would be good.]
----------------------
./MANIFEST
./configure.in
./configure [REGENERATED]
Added more checking for `make' features.
./Makefile.in
./doc/Makefile.in
./doc/html/Makefile.in
./doc/html/Tutor/Makefile.in
./examples/Makefile.in
./pablo/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in [REMOVED]
./config/depend1.in [NEW]
./config/depend2.in [NEW]
./config/depend3.in [NEW]
./config/depend4.in [NEW]
./config/dependN.in [NEW]
The directory search stuff was moved into commence.in, thereby
shortening the Makefile.in prologues.
./doc/html/Dependencies [NEW]
./doc/html/Tutor/Dependencies [NEW]
./examples/Dependencies [NEW]
./src/Dependencies [NEW]
./test/Dependencies [NEW]
./testpar/Dependencies [NEW]
./tools/Dependencies [NEW]
The `.distdep' files were all renamed to `Dependencies' to make them
more obvious. They are required (but may be empty) in every directory
that has a Makefile.in that ends with @CONCLUDE@ (you'll get an
obvious error from make if you forgot to create one).
./bin/trace
./src/H5.c
Added H5E_major_t and H5E_minor_t although tracing only prints the
integer value.
./src/H5E.c
./src/H5Epublic.h
Added tracing information.
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDgass.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5FDstdio.c
Fixed places where FUNC_LEAVE() evaluated it's argument more than
once.
Added tracing information.
Wrapped long lines.
./config/gnu-flags
Fixed a syntax error when we don't have a gnu compiler.
----------------------
./configure.in
./src/H5config.h.in [REGENERATED]
The /usr/ncsa/{include,lib} directories are only added if they
actually exist. This fixes a warning on some systems.
Checks for the <pdb.h> header file and also for either the PDB or Silo
library, and if found prepares to compile the pdb2hdf program.
./config/distdep
Relative path names for include files are changed to base names since
the makefile contains the logic for searching and since it's likely
that building the .distdep files happed from a location other than
where they would be used in the file system.
./config/conclude.in
Fixed shell errors when `for' loops iterate over nothing for the
`uninstall' target.
./src/H5D.c
./src/H5Oefl.c
File names for the external files are added to the heap when the
dataset is created instead of when the object header is written. This
fixes a rare infinite recursion bug.
./src/H5FD.c
./src/H5FDpublic.h
Optimization to the free list causes H5FD_alloc() usage to go from >10
seconds to <0.4 second for one example (converting a 30MB equation of
state file from PDB to HDF5 format). The optimization is to simply
keep track of the largest item in the free list and not search the
free list when the largest item is not big enough to satisfy the
request.
./src/H5FDcore.c
./src/H5FDcore.h
./test/h5test.c
If the `backing_store' property is true then a flush causes the entire
contents of memory to be written to the specified file. This is in
preparation for the ASCI/red optimizations and is currently tested by
the pdb2hdf `--cached' switch.
./src/H5Odtypes.c
Wrapped three long lines.
./tools/Makefile.in
./tools/pdb2hdf.c [NEW]
A PDB-to-HDF5 translator. It only translates meta data -- the
resulting HDF5 points into the PDB file for the raw data.
----------------------
./Makefile.in [1.3]
./examples/Makefile.in [1.3]
./pablo/Makefile.in [1.3]
./src/Makefile.in [1.3]
./test/Makefile.in [1.3]
./testpar/Makefile.in [1.3]
./tools/Makefile.in [1.3]
./config/commence.in [1.3]
./config/conclude.in [1.3]
./config/depend.in [1.3]
Added a `.PATH' target for Irix pmake which is identical to
the VPATH used by most other `make' programs. Irix 6.5 (or
6.4?) and later `make' ignores VPATH.
Started all beginning-of-line comments with `##' instead of
just `#' because Irix `pmake' barfs on things like the
following because it sees the `# if' as a directive:
# make will barf on the following line
# if running Irix pmake
./config/commence.in [1.3]
Added empty definitions for optional `make' macros because
Irix pmake complains if it sees a macro which has never been
defined. The main body of the Makefiles can redefine these
macros to whatever they need.
----------------------
./config/commence.in
./examples/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Fixed some dependency problems in Makefiles. If the library
version is updated then everything gets recompiled.
./src/H5G.c
./src/H5R.c
Failure return value for object type functions is now
H5G_UNKNOWN as documented.
./src/H5Shyper.c
./src/H5Spoint.c
Fixed an unused argument warning.
./tools/h5debug.c
Fixed a call to H5F_block_read() since the 4th argument is
different now.
./tools/h5ls.c
Added a space between the object name and class to make the
output readable when the object name is longer than 24
characters.
C
----------------------
./config/commence.in
./config/conclude.in
./test/Makefile.in
./tools/Makefile.in
Fixed so private libraries are not installed publicly.
The installation directories `bin', `include', and `lib' are
created mode 755.
./src/H5.c
./src/H5A.c
./src/H5F.c
./src/H5Fcore.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5R.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Vprivate.h
./src/H5Z.c
./src/H5detect.c
./src/H5private.h
./test/chunk.c
./test/dsets.c
./test/dtypes.c
./test/h5test.c
./test/overhead.c
./test/ragged.c
./test/tattr.c
./tools/h5dump.c
./tools/h5findshd.c
./tools/h5ls.c
Changed `__unused__' to `UNUSED' to fix a conflict with GNU
header files.
./src/H5Tpkg.h
./test/h5test.h
Removed __unused__ from forward function declarations.
./src/H5P.c
Removed a comment about restrictions for the type conversion
temporary buffers. Thanks to Quincey, the comment no longer
applied.
./src/H5T.c
Relaxed the H5Tpack() a little so it would pack compound data
structures that had non-transient atomic members.
./tools/h5ls.c
Added a `-g' (or `--group') flag that causes information to be
printed about the specified group instead of the group's
contents. (sort of like Unix's `ls -d'). The `-g' can be used
in combination with `-r' to print information about the group
and its contents.
----------------------
./Makefile.in
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./config/commence.in
./config/conclude.in
./config/dec-osf4.x
./config/depend.in
./config/freebsd
./config/linux-gnu
./config/linux-gnulibc1
./config/linux-gnulibc2
./config/solaris2.x
./examples/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./tools/testh5dump.sh
Changes that allow hdf5 to be configured and compiled in a
directory other than the source directory. This is especially
useful if you want to concurrently compile with different
compilers and/or compile flags, or if the hdf5 source is on
read-only media like a CDROM. The changes were surprisingly
easy ;-) Here's what you can do now...
$ mkdir /tmp/build1 # or something
$ cd /tmp/build1
$ /cdrom/hdf5/configure # where ever the source is
$ make
Paul, you'll have to change the testh5toh4 script similar to
the way I changed testh5dump.sh. I started working on it but
then gave up because of a number of problems: (1) I had to
comment out all the tests that let h5toh4 choose the output
file name because it always tried to put the output file in
the same directory as the input file, (2) if path names are
used during the h4 dump then they interfere with the
diff. The test works fine when run in the source directory,
but try this instead:
$ gunzip <hdf5-1.1.67.tar.gz |tar xf -
$ chmod -R ugo-w hdf5-1.1.67
$ mkdir build
$ cd build
$ ../hdf5-1.1.67/configure
$ make check
Dan, I didn't modify the pablo/Makefile.in because I have no
way to test it. I think all you need to do is add a couple
lines before the @COMMENCE@ line and add a couple search
directories for header files. Anyway, it seems like almost an
exact duplicate of the src/Makefile.in, so it shouldn't be a
problem...
./Makefile.in
Removes a few more temporary files during make clean and
distclean.
./configure.in
I fixed the creation of the time-stamp files so that the
initial make doesn't have to regenerated all the makefiles
(only GNU make users will see any change).
./src/H5R.c
Changed a return type from `intn' to `int' for an API
function.
./src/H5detect.c
Added the volatile qualifier to a couple more variables.
./tools/h5tools.c
Fixed a compiler warning about an unused local.
./tools/h5toh4.c
Initialized `optind' to 1 because it's zero on my system. It
should always be one on a unix system.
./tools/testh5toh4
Redirected "broken pipe" messages to /dev/null so outut is
formatted correctly.
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5private.h
Temporarily commented out the code that tries to link a simple
MPI-IO application because I'm not sure how to pass $LDFLAGS
and $LIBS to the compiler.
Removed the `--enable-parallel=ibm' switch because the library
we link with is either -lmpcc or -lmpcc_r but not both. The
only way to tell is to see what compiler was specified (mpcc
or mpcc_r) but if that compiler is specified then we don't
need any libraries (the compiler script supplies them). That
leaves just two choices: the user must use a compiler script:
CC=mpcc ./configure
or the user must state which library is desired:
LDFLAGS='-lmpcc' ./configure --enable-parallel
Checks for <setjmp.h>, longjmp(), and signal(). We don't check
for setjmp() because it could be a macro (in fact, Posix
requires it to be a macro) and if longjmp() is present then
setjmp() is probably present too ;-)
./src/H5detect.c
The alignment detection loop uses SIGBUS and setjmp/longjmp
instead of fork/wait in order to get around bugs with forking
in conjunction with mpich. This hasn't been tested on the
SP-2 yet but it does work on the DEC Alpha.
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Changed the order that libraries are linked so -lhdf5 is
always before $LDFLAGS.
----------------------
./INSTALL
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Improvements for parallel library. If you have a properly
working mpicc you should be able to just say:
$ CC=mpicc ./configure
and you will see
checking for mpirun... /usr/local/mpi/bin/mpirun
checking for parallel support files... skipped
checking how to run on one processor...
/usr/local/mpi/bin/mpirun -np 1
checking how to run in parallel...
/usr/local/mpi/bin/mpirun -np $$NPROCS
To quote from the INSTALL file....
*** Parallel vs. serial library
The HDF5 library can be configured to use MPI and MPI-IO for
parallelizm on a distributed multi-processor system. The easy
way to do this is to have a properly installed parallel
compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that
executable as the value of the CC environment variable:
[NOTE: mpcc is not tested yet]
$ CC=mpcc ./configure
$ CC=/usr/local/mpi/bin/mpicc ./configure
If no such wrapper script is available then you must specify
your normal C compiler along with the distribution of
MPI/MPI-IO which is to be used (values other than `mpich' will
be added at a later date):
$ ./configure --enable-parallel=mpich
If the MPI/MPI-IO include files and/or libraries cannot be
found by the compiler then their directories must be given as
arguments to CPPFLAGS and/or LDFLAGS:
$ CPPFLAGS=-I/usr/local/mpi/include \
LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \
./configure --enable-parallel=mpich
If a parallel library is being built then configure attempts
to determine how to run a parallel application on one
processor and on many processors. If the compiler is mpicc
and the user hasn't specified values for RUNSERIAL and
RUNPARALLEL then configure chooses `mpirun' from the same
directory as `mpicc':
RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1
RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2}
The `$${NPROCS:=2}' will be substituted with the value of the
NPROCS environment variable at the time `make check' is run
(or the value 2).
./testpar/Makefile.in
Saying `make check' (or `make test') will run the tests on two
processors by default. If you define NPROCS then that many
processors are used instead:
$ NPROCS=4 make check
./configure.in
Fixed (hopefully) bugs with detecting whether __attribute__
and __FUNCTION__ are special keywords for the compiler.
./Makefile.in
Saying `make install' from the top level directory shows
instructions for using shared libraries.
./config/commence.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Moved the @top_srcdir@ into the makefiles because it was
expanded too early and had the wrong value.
./INSTALL
Added a warning that if the wrong version of hdf4 tools are
installed then `make check' will fail in the tools directory.
----------------------
./INSTALL
Reorganized and added some additional examples.
./MANIFEST
./aclocal.m4 [NEW]
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./bin/ltconfig [NEW]
./bin/ltmain.sh [NEW]
Added tests to determine how to compile shared libraries and
how to link programs with them before the libraries are
installed. Also how to install and uninstall shared
libraries. The configure step also prints the names of the
config files it's trying to load for easier debugging.
./bin/config.guess
./bin/config.sub
Replaced with a newer version from GNU. The changes we made
to that file to report `irix6.x' and `FreeBSD' without version
numbers have been incorporated into configure.in instead. In
the future, do not change these two files (see the top of
configure.in instead). By the way, this update was required to
get shared libraries working.
./config/linux [REMOVED]
./config/linux-gnulibc1 [NEW]
./config/linux-gnu [NEW]
./config/alpha-dec [REMOVED]
./config/alpha-dec-osf4.0 [REMOVED]
./config/dec-osf4.x [NEW]
./config/irix5.3 [REMOVED]
./config/irix5.x [NEW]
./config/irix64 [REMOVED]
./config/freebsd
Moved config files around to agree with output from the new
config.guess. The linux file was split into gnu (RedHat),
gnulibc1, and gnulibc2 versions. The alpha-dec file was
removed (I think it was unused) and the alpha-dec-osf4.0 was
changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and
the irix64 file was renamed to irix6.x. The freebsd file was
changed to point to linux-gnulibc1. These changes were tested
on:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20
OSF1 4.0
./config/alphaev56-dec-osf4.x
./config/irix64
Added warnings similar to linux/freebsd about using compilers
with known bugs.
./config/commence.in
./config/conclude.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Added definitions for shared libraries. This has been tested
on the following systems:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20 static only
OSF1 4.0
If you want to disable use of shared libraries (you probably
do for development purposes since it takes a lot longer to
compile and because you have to run dynamically linked
programs in a special way if the library hasn't been
installed) then add `--disable-shared' to the configure
command line. This is all documented in the INSTALL file.
./bin/release
Temprarily commented out the MANIFEST checking when running
under svf since svf is about to be replaced by a newer
version. This change only affects error checking during the
release process.
./Makefile.dist
./Makefile.in
Added `make check' which does the same thing as `make _test'
since the former is endorsed by the GNU coding style and
people are used to it. The old `make _test' still works too
(and so does `make test' if you use GNU make).
New Feature
SOLUTION:
h5toh4 is an H5 utility which converts HDF5 files into
HDF4 files. It converts only those H5 objects which have
have mappings into H4 objects.
Some H5 objects that may be converted into H4 objects are:
1) H5 group objects may be converted into H4 Vgroup objects.
2) H5 dataset objects of integer or floating point datatype
may be converted into H4 SDS objects.
3) H5 dataset objects of compound datatype and rank 1 may
be converted into H4 Vdata objects. Field members of the
compound datatype are constrained to be single dimensional.
Platforms tested:
Solaris2.5, HP10.20
----------------------
./config/conclude.in
./test/Makefile.in
./tools/Makefile.in
The Makefile $TESTS variable has finally been split into
$TEST_PROGS and $TEST_SCRIPTS with the latter being the names
of shell scripts that need to be run with `/bin/sh'. Now we
don't have to copy each shell script before we run it. NOTE:
THIS CHANGE DOES NOT AFFECT THE PABLO MAKEFILE SINCE THAT FILE
IS A COPY OF A PREVIOUSLY GENERATED MAKEFILE.
./src/Makefile.in
Added H5Snone.c to the source list.
./src/H5G.c
Plugged a memory leak by emptying the object type "isa" table
when the library is closed.
./src/H5Tconv.c
./src/H5Tpkg.h
Added 48 new type functions to take advantage of hardware for
integer type conversions. These functions are not registered
in the conversion table yet because I haven't fully tested
them.
./src/H5Tpkg.h
Removed __unused__ qualifiers from prototypes.
----------------------
./INSTALL
Added instructions about specifying a path for GNU zlib and
HDF4 headers and library.
Added comments for each of the tool names. Added h5toh4 as a
tool name.
./configure.in
./conigure [REGENERATED]
./src/H5config.h.in [REGENERATED]
The config/* scripts get invoked with $CC_BASENAME set the
base name of the compiler in order to make it easier to handle
setting compiler flags for different compilers in a big case
statement. For instance, if $CC has the value
/usr/local/mpi/bin/mpicc -ansi -64
then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not
set if $CC is not set.
Fixed alignment in `configure --help'.
An include and/or library path can be specified for GNU zlib
if configure can't find it in normal places. The "normal"
means wherever your compiler normally searches, including
search paths you've added through environment variables like
CPPFLAGS and LDFLAGS. The INSTALL file has instructions.
The `-ljpeg' library is detected.
If `ssize_t' is not found then a #define is added to
H5config.h similar to what we already do for `size_t'.
We detect the hdf5 header file `mfhdf.h' and libraries
`-lmfhdf' and `-ldf' and if found define the H5TOH4 and
TESTH5TOH4 Makefile variables. The user can specify an
include and/or library path. The INSTALL file has
instructions.
The `RUNTEST' variable has been split into `RUNSERIAL' and
`RUNPARALLEL' because these are different commands. The
makefile still uses `RUNTEST', which defaults to the RUNSERIAL
value. The new testpar/Makefile.in sets RUNTEST to the
RUNPARALLEL value. The default RUNSERIAL value is empty and
the default RUNPARALLEL value is `mpirun -np 2'. These can
both be overridden in the config/* files. To make the value
the empty string set it like `RUNPARALLEL=none' in the
config/* file.
The new testpar/Makefile is generated from testpar/Makefile.in
./config/commence.in
Added the RUNSERIAL and RUNPARALLEL makefile definitions.
./src/Makefile.in
The `H5detect' program is run with RUNSERIAL, which is empty
on all platforms except intel-osf1 (ASCI/Red)
./config/conclude.in
Removed the `.c.a:' implicit rule -- we don't use it any more.
./config/BlankForm
./config/alpha-dec
./config/alpha-dec-osf4.0
./config/freebsd2.2.7
./config/hpux10.20
./config/hpux9.03
./config/intel-osf1
./config/irix5.3
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
All of these files have been updated to hande multiple
compilers. Most of them assume `cc' if CC is not set. The
documentation in `BlankForm' has been updated and
documentation in the other files refer to `BlankForm'.
The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra
library search paths.
./examples/Makefile.in
./test/Makefile.in
./tools/Makefile.in
Simplified by grouping some dependency information together
more succinctly.
The tools Makefile.in has been modified to work with the
`h5toh4' and `testh5toh4' programs. Until Paul checks these
in you may have problems compiling. If so, just create files
h5toh4.c and testh5toh4.c that contain:
#include <stdio.h>
int main(int argc, char *argv[]) {
fprintf(stderr, "%s: not implemented\n", argv[0]);
return 1;
}
./src/H5public.h
Removed definition for `ssize_t' since this is now handled by
configure in H5config.h with a #define.
./MANIFEST
./testpar/Makefile.in [NEW]
Added a makefile for parallel tests. As soon as we get this
working properly we can remove the other four makefiles in
that directory and maintain just one.
----------------------
./src/H5F.c
./src/H5Fprivate.h
./src/H5G.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gpublic.h
./test/istore.c
./test/tstab.c
Removed CWG functionality.
./tools/Makefile.in
Added `_test' where I added `test' last week. Maybe now the
snapshots will start up again...
----------------------
./src/H5D.c
Fill values are working for contiguous datasets now except
there are two things that need more support from the data
space layer, specifically the ability to form a selection from
the difference of two selections. They are (1) extending an
external contiguous dataset, (2) optimization by delaying the
fill until after the first H5Dwrite().
Renamed H5D_allocate() to H5D_init_storage() since allocation
is only part of the story. Added a data space argument so it
doesn't have to query the space from the object header -- the
space is always available in the caller anyway.
Removed `#ifdef HAVE_PARALLEL' from a few places where it
wasn't necessary. We don't need it around code that doesn't
compile anything from mpi.h or mpio.h.
./src/H5Fistore.c
Uncommented H5F_istore_alloc() for non-parallel and moved the
`#ifdef HAVE_PARALLEL' just around Kim's barrier.
./src/H5Fmpio.c
Wrapped a couple long lines.
Got rid of two signed vs. unsigned comparison warnings.
./MANIFEST
./test/Makefile.in
./test/fillval.c [NEW]
Added tests for fill values. The contiguous dataset extend
test is disabled until H5S_SELECT_DIFF is implemented.
./tools/Makefile.in
Fixed a bug where `make test' didn't build the executables
first. This should cause the snapshots to start up again.
./Makefile.in
Changed to build in `test' directory before `tools'
directory. We want the library tests to pass before we even
start considering the tools. You can still build and/or test
the tools independent of the library tests passing.
During make test, it copies the master copy testh5dump.sh
to a temperary copy, testh5dump and run it. Make clean
remove only duplicated version, not the original master.
Platform test:
baldric.
Renamed what was called h5dump.c to h5tools.c.
Changed Makefile.in to reflect all the changes.
(Make dependence is to be processed later.)
Tested in Solaris 2.5
----------------------
./src/H5A.c
./src/H5Apublic.h
./test/tattr.c
Switched the order of the second and third argument of
H5Aget_name() to make it consistent with other functions that
take buffers and buffer sizes.
./src/H5G.c
./src/H5Gpublic.h
./src/H5Gprivate.h
The H5Gget_comment() function returns the size of the comment
including the null terminator. If the object has no comment
then zero is returned. If an error occurs then a negative
value is returned.
./MANIFEST
./tools/Makefile.in
./tools/h5tools.h [NEW]
./tools/h5dump.c [NEW]
Created a library for printing values of datasets in a way
that looks nice. It's not done yet, but I needed it for
debugging the contents of files from Jim Reus.
./tools/h5ls.c
Added the `-d' and `--dump' options which cause the contents
of a dataset to be printed. Added `-w N' and `--width=N'
options to control how wide the raw data output should be. If
you want single-column output then say `-w1'.
Printing dataset values can now handle datasets of any integer
or floating point atomic type. As a special case, integers
which are one byte wide are treated a character strings for
now.
Sample output:
$ h5ls --dump --width=60 banana.hdf
ARCHIVE 0:0:0:744 Dataset {52/Inf}
Data:
(0) "U struct complex { double R; double I; };\012V"
(43) " double;\012"
U 0:0:0:2500 Dataset {256/512}
Data: printing of compound data types is not implemented yet
V 0:0:0:3928 Dataset {256/512}
Data:
(0) 0, 0.015625, 0.03125, 0.046875, 0.0625,
(5) 0.078125, 0.09375, 0.109375, 0.125, 0.140625,
(10) 0.15625, 0.171875, 0.1875, 0.203125, 0.21875,
(15) 0.234375, 0.25, 0.265625, 0.28125, 0.296875,
...
----------------------
./Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in
./src/Makefile.in
./test/Makefile.in
Tests are no longer installed for `make install'. Added a new
target `make tests' that builds the tests but doesn't run them.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Added detection of fork() and waitpid(). If present the
contants HAVE_FORK and HAVE_WAITPID will be defined in
H5config.h.
./test/dtypes.c
Minor tweaks for systems that don't have fork() or waitpid().
./MANIFEST
./tools [NEW]
./tools/Makefile.in [NEW]
./tools/h5debug.c [NEW]
./tools/h5import.c [NEW]
./tools/h5ls.c [NEW]
./tools/h5repart.c [NEW]
Added a tools directory and moved tools from the src directory
to here.
