Feature
Description:
Sometimes the total build process take a long time, especially in
parallel systems. Need some idea if some times are taking way
too long to process.
Solution:
Added timestamps marking the beginning and ending of tests in
one directory. This gives a rough idea of how much time the
tests use.
Platforms tested:
Tested only in Eirene since this is just a makefile thing and only
involve a simple command like echo and date.
Misc. update:
Improvement
Description:
Added an explanation of using $HDF5_PARAPREFIX for Parallel tests.
Platforms tested:
h5committested (using sol instead of arabica) plus eirene(pp).
Misc. update:
New test feature
Description:
The various virtual file drivers (multi, family, core, ...)
are not tested automatically. One would have to do it by hand
by setenv HDF5_DRIVER <driver> and then do gmake check in test/.
Solution:
Added a new target, check-vfd, which will take the list from
$VFD_LIST and run 'make check' with each of its members.
Platforms tested:
h5committested.
Since check-vfd is not invoked by default, I went to each machine
to invoke them by hand. The target worked fine but there were
errors reported from those driver tests. (Those errors were beyond
the scope of this make target test.)
Misc. update:
Bug Fix (Bug #806)
Description:
When compiling/installing with the command "make install" (without
performing a "make" beforehand) the tools weren't being made. This
was because the `install' command in the Makefiles only relied upon
public libraries, not private ones (which the one in the tools
directory is).
Solution:
Had the `install' command be dependent upon an "AUX_LIB" macro which
includes libraries which are needed but aren't distributed (that is,
they're staticly compiled).
Platforms tested:
Linux
Bug Fix
Description:
``make uninstall-doc'' wasn't working properly. Some files would be
left behind in the installed source tree. The fix I put in was too
heavy-handed as it wiped out the entire doc tree that was installed
and would remove any other files which were installed there.
Solution:
Executed the ``make uninstall-examples'' command if uninstalling the
docs. Fixed how the java Tutorial examples were being removed (they
weren't). Essentially used the PUB_SUBDOCS macro to help remove them.
Platforms tested:
Linux
Purpose:
Feature Add
Description:
Added "install-example" and "install-all" to the Makefile system.
The behaviour of the "make install*" options:
make install - Installs binaries, libraries, include
files, and example programs.
make install-examples - Installs only the example programs.
The directories are:
${prefix}/doc/hdf5/examples/{c,c++,fortran}
make install-all - Install the binaries, libraries, include
files, example programs, and
documentation. The whole kit-n'-caboodle.
make uninstall-examples - Get rid of those example files (but not
the ${prefix}/doc/hdf5/examples/...
directories)
There's a new bin/ program which helps create directories which are
deeply nested called "mkdirs". It's a simple shell script.
Platforms tested:
Linux
New feature.
Description:
Test programs were assumed to be serial programs only.
There was no provision to test parallel programs automatically.
Solution:
Added $(TEST_PARA_PROGS) to hold parallel test programs and
added appropriate action entry to test them if defined.
Platforms tested:
Eirene (parallel).
Bug fix.
Description:
'make distclean' is broken on FreeBSD 4.3, with some syntax errors. I have
a feeling that the make command is more picky in FBSD 4.3 than in 4.2 which
is what is causing these errors to crop up now.
Solution:
Add missing semicolon to line in 'clean' target and take out bogus '-'s
in front of "$(RM)" commands which are already in if's
Platforms tested:
FreeBSD 4.3 (hawkwind)
Bug Fix
Description:
On the T3E, the hack about SUBDOCDIR macro didn't work cause it
wanted an actual value to be in this macro. Well, it wasn't, so now I
check that it actually has a value.
Solution:
Check that DOCDIR and SUBDOCDIR have a value before trying to do
anything with it.
Hack
Description:
Need to install the files in the examples/java directory, however
they include installing a Makefile. This was causing havoc with our
Makefile/configure system.
Solution:
Changed so that you can specify a "SUBDOCDIR" which will create a
subdirectory for you and fill it with files specified in PUB_SUBDOCS.
Platforms tested:
Linux
Bug Fix
Description:
Added logic so that all the various make options would recursively be
done in their subdirectories.
Solution:
Added a for-loop to iterate through the subdirectories.
Platforms tested:
Linux
Fix
Description:
The "make *clean" options weren't recursing through the
subdirectories (if they exist).
Solution:
Force it to recurse through the subdirectories listed in SUBDIRS
Platforms tested:
Linux
Fix for install-doc feature
Description:
I fixed the install-doc feature so that it actually works! (Imagine
:-).
Solution:
It manually checks if the DOCDIR exists. If not, then it mkdir's it.
Then it does the install of the appropriate docs.
Platforms tested:
Linux, Solaris
Bug Fix
Description:
On some platforms, if you don't have . in your PATH, it won't
find the test program it's supposed to run.
Solution:
Changed instead to ./$$test so that it picks up the program in
the current directory.
Platforms tested:
Opus and Linux
Fix Irix pmake bugs
Description:
Build fails on Irix when builddir != srcdir
Solution:
* acconfig.h
* src/H5config.h.in [REGENERATED]
Added definition for HAVE_STREAM
* config/conclude.in
* config/depend1.in
* config/depend2.in
* config/depend3.in
* config/depend4.in
The `Dependencies' file is located in the source
tree. This fixes bugs for Irix pmake when compiling
outside the source tree. Hopefully it still preserves
Albert's changes which allow concurrent compilations
to not stomp on each other's Dependencies files.
* examples/Dependencies [REGENERATED]
* src/Dependencies [REGENERATED]
* test/Dependencies [REGENERATED]
* tools/Dependencies [REGENERATED]
Regenerated for testing purposes.
Platforms:
i686-pc-linux
mips-sgi-irix6.5
sparc-sun-solaris2.6
Feature
Description:
Most tests are done inside a for-loop. Whenever a test exits
with error, the for-loop does a "exit 1" to exit the make.
"make -i" could not catch and ignore the error status.
Solution:
Replaced "exit 1" with break. At the end of the for-loop,
test if all tests have been run. If not, the for-loop is
ended by the break command, thus raise an error. Now,
'make -i' can catch and ignor it.
Also added the test of variable HDF5_Make_Ignore inside the
for-loop to indicate the desire to ignore errors when the
HDF5_Make_Ignore is set to a non-null/blank string.
Platforms:
Tested on modi4 and eirene.
The Dependencies files were generated in $srcdir even when
--srcdir is used. It caused conflicts if multiple hosts
are doing make sharing the same $srcdir. It also violated
the rule that --srcdir would not modify the content of $srcdir
which could be on a read-only media like a CD-ROM.
Solution:
Dependencies files are generated in the "current" directory.
Platform tested:
dangermouse (linux), modi4 (IRIX64).
----------------------
./MANIFEST
./configure.in
./configure [REGENERATED]
Added more checking for `make' features.
./Makefile.in
./doc/Makefile.in
./doc/html/Makefile.in
./doc/html/Tutor/Makefile.in
./examples/Makefile.in
./pablo/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in [REMOVED]
./config/depend1.in [NEW]
./config/depend2.in [NEW]
./config/depend3.in [NEW]
./config/depend4.in [NEW]
./config/dependN.in [NEW]
The directory search stuff was moved into commence.in, thereby
shortening the Makefile.in prologues.
./doc/html/Dependencies [NEW]
./doc/html/Tutor/Dependencies [NEW]
./examples/Dependencies [NEW]
./src/Dependencies [NEW]
./test/Dependencies [NEW]
./testpar/Dependencies [NEW]
./tools/Dependencies [NEW]
The `.distdep' files were all renamed to `Dependencies' to make them
more obvious. They are required (but may be empty) in every directory
that has a Makefile.in that ends with @CONCLUDE@ (you'll get an
obvious error from make if you forgot to create one).
./bin/trace
./src/H5.c
Added H5E_major_t and H5E_minor_t although tracing only prints the
integer value.
./src/H5E.c
./src/H5Epublic.h
Added tracing information.
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDgass.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5FDstdio.c
Fixed places where FUNC_LEAVE() evaluated it's argument more than
once.
Added tracing information.
Wrapped long lines.
./config/gnu-flags
Fixed a syntax error when we don't have a gnu compiler.
----------------------
./configure.in
./src/H5config.h.in [REGENERATED]
The /usr/ncsa/{include,lib} directories are only added if they
actually exist. This fixes a warning on some systems.
Checks for the <pdb.h> header file and also for either the PDB or Silo
library, and if found prepares to compile the pdb2hdf program.
./config/distdep
Relative path names for include files are changed to base names since
the makefile contains the logic for searching and since it's likely
that building the .distdep files happed from a location other than
where they would be used in the file system.
./config/conclude.in
Fixed shell errors when `for' loops iterate over nothing for the
`uninstall' target.
./src/H5D.c
./src/H5Oefl.c
File names for the external files are added to the heap when the
dataset is created instead of when the object header is written. This
fixes a rare infinite recursion bug.
./src/H5FD.c
./src/H5FDpublic.h
Optimization to the free list causes H5FD_alloc() usage to go from >10
seconds to <0.4 second for one example (converting a 30MB equation of
state file from PDB to HDF5 format). The optimization is to simply
keep track of the largest item in the free list and not search the
free list when the largest item is not big enough to satisfy the
request.
./src/H5FDcore.c
./src/H5FDcore.h
./test/h5test.c
If the `backing_store' property is true then a flush causes the entire
contents of memory to be written to the specified file. This is in
preparation for the ASCI/red optimizations and is currently tested by
the pdb2hdf `--cached' switch.
./src/H5Odtypes.c
Wrapped three long lines.
./tools/Makefile.in
./tools/pdb2hdf.c [NEW]
A PDB-to-HDF5 translator. It only translates meta data -- the
resulting HDF5 points into the PDB file for the raw data.
Problems:
libtool generated compiler linking commands with dependency_libs
appended to any dynamic library used but only "-lz -lmfhdf ..." were
appended but "-L...", if used, are not appended. So, the "-lz ..."
information is incomplete and solaris cc does not allow even if the
"-L..." information is provide in later part of the command.
Solution:
Included $LDFLAGS in the building of $(LIB).
irix5.x:
irix6.x:
Added "-s" to PROD_CFLAGS so that production code are striped for
smaller sizes.
Platform Tested:
Solaris 2.6
----------------------
./Makefile.in [1.3]
./examples/Makefile.in [1.3]
./pablo/Makefile.in [1.3]
./src/Makefile.in [1.3]
./test/Makefile.in [1.3]
./testpar/Makefile.in [1.3]
./tools/Makefile.in [1.3]
./config/commence.in [1.3]
./config/conclude.in [1.3]
./config/depend.in [1.3]
Added a `.PATH' target for Irix pmake which is identical to
the VPATH used by most other `make' programs. Irix 6.5 (or
6.4?) and later `make' ignores VPATH.
Started all beginning-of-line comments with `##' instead of
just `#' because Irix `pmake' barfs on things like the
following because it sees the `# if' as a directive:
# make will barf on the following line
# if running Irix pmake
./config/commence.in [1.3]
Added empty definitions for optional `make' macros because
Irix pmake complains if it sees a macro which has never been
defined. The main body of the Makefiles can redefine these
macros to whatever they need.
----------------------
./configure.in
./configure [REGENERATED]
./src/libhdf5.settings.in [NEW]
./config/conclude.in
./INSTALL
./MANIFEST
A file called `libhdf5.settings' is installed along with the
libraries and it contains a list of various things that might
be of interest to someone using the library (such as what
compiler/options were used and what other libraries might need
to be linked to satisfy external references). We can add more
things as it becomes necessary. Here's a sample...
SUMMARY OF THE HDF5 CONFIGURATION
=================================
HDF5 Version: hdf5-1.1.106
Configured on: Tue Jun 8 11:38:52 EDT 1999
Configured by: matzke@llnl.gov at Spizella Software
Configure mode: development
Host system: i686-pc-linux-gnulibc1
Byte sex: little-endian
Libraries: static, shared
Parallel support: mpicc
Installation point: /usr/local
Compiler: mpicc (egcs-2.91.66)
Compiler switches: -Wall -g
Extra libraries: -lmfhdf -ldf -lz -ljpeg -lm
Archiver: ar
Ranlib: ranlib
Debugged Packages: d,e,f,g,hg,i,mm,o,p,s,v,z
API Tracing: yes
File addresses: large
known so far do not need a "launching command" to run shell script.
(If a future system needs it, maybe we should use a new VARIABLE
called RUNSHELL, default to /bin/sh, to do the launching.)
Then inside the test shell script, it needs to know how to launch
serial or parallel executions. So, pass the RUNSERIAL and RUNPARALLEL
variables to the /bin/sh command.
----------------------
./tools/h5ls.c
Added a `--address' (`-a') switch which causes h5ls to display
file addresses for raw data. For contiguous datasets it's just
a nice simple number, but for chunked datasets it's a list of
logical dataset coordinates, file addresses, filter masks, and
storage sizes.
Changed `--dump' switch to `--data'.
./src/H5D.c
./src/H5F.c
./src/H5Fprivate.h
Enhanced the indexed-storage B-tree iterator so it can dump
raw data addresses (and other info) to the standard error
stream.
Added H5Ddebug() so h5ls has a way to dump addresses for
datasets. I'm not sure what else this API function should do,
so I think we should discuss it before we document it. So far,
h5ls is the only thing that uses it, and we can easily change
that.
./src/H5Tconv.c
./test/dtypes.c
Finally had a chance to verify Paul's H5T_conv_s_s (general
string to string conversions) bug fixes and incorporate them
into H5T_conv_f_f (general floating-point to floating-point
conversions) and H5T_conv_i_i (general integer to integer
conversons). Thanks Paul.
./src/H5D.c
./src/H5S.c
./src/H5Sprivate.h
Added performance timers around data space read and write
callbacks. They were already there for the gather/scatter
callbacks.
The timings for read/write callbacks are displayed along with
gather/scatter when data space debugging is turned on.
./bin/iostats
Updated to print totals. Added a `--fast' option that doesn't
do any output except the totals and is much faster.
./bin/trace
Changed __unused__ to UNUSED to match source code.
./config/gnu-flags
Updated error message for pgcc. I've sent bug reports to the
pgcc people but the new version still has the same bug.
./configure.in
./config/conclude.in
./config/depend.in
Fixed dependencies for non-GNU makes when run in a directory
other than the hdf5 source tree.
Updated GNU `make dep' rules to copy the distributed
dependencies for non-GNU makes into the source tree when run
in some other directory.
----------------------
./tools/h5tools.c
./tools/h5tools.h
Finally fixed a long-standing bug that caused core dumps if
a compound datum rendered to more than some number of
characters (we kept bumping up the limit at the risk of
violating stack size limits on some machines). The fix works
only on systems that have the vsnprintf() function (otherwise
a 4kB limit is imposed, which if violated probably dumps
core). If vsnprintf() is present then the library dynamically
allocates space for the output string.
Also made it possible to control how compound data is rendered
across multiple lines of output by allowing the caller to
specify where optional line-breaks get inserted. The output
functions split up the value at one or more optional
line-breaks to prevent it from wrapping around the screen.
If a datum doesn't fit on the current line but would fit on
the next line then it is printed on the next line regardless
of whether optional line-breaks would have prevent wrapping
around the screen. This makes it easier to find the beginnings
of compound data values. This feature is disabled by default
but can be enabled by the application.
If a datum doesn't fit on the current line and the previous
datum also occupied more than one line then we move to the
next line before printing. This makes it easier to find the
beginnings of compound data values but prevents the output
from looking fragmented if there are only a few long values
among mostly short values. This feature is disabled by
default but can be enabled by the application.
The application can control the printf() formats used for all
the native data types. The defaults are what the library used
to use: %g, %ld, %lu, %d, and %u
./tools/h5ls.c
Compound datatype values can now be split across multiple
lines of output instead of just wrapping. Also, when lots of
compound values are too long they all start at the beginning
of a line. This only required about 10 lines of changes in the
setup for tools library calls (I didn't modify the h5dump
program because it uses its own version of the tools library
that forked off long ago).
Added code for Win32 which is unable to cast `unsigned long
long' to `double'. If the dataset size exceeds (2^63)-1 then
the percent utilization is not displayed (this is easily
possible with chunked datasets). This is untested yet.
./configure.in
./src/H5config.h.in
./src/H5.c
./src/H5private.h
Check for vsnprintf() and provide a simple, stupid definition
if it isn't available. The stupid definition just calls
vsprintf() and ignores the second argument. This can result in
buffer overflows in h5ls and h5dump since vsprintf() is an
unsafe function (and anyone can create an hdf5 file that runs
an arbitrary command from h5ls and h5dump in that case)!
./config/conclude.in
Remove more *.o files for `make clean'
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5I.c
./src/H5Iprivate.h
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
Cleaned up a memory leak during H5_term_library() by allowing
H5I_clear_group() to skip items that couldn't be freed. This
allows the item to remain in the group until we can free it
later.
./src/H5F.c
The H5F_close_all() function fails if a file cannot be closed.
----------------------
./config/commence.in
./config/conclude.in
./test/Makefile.in
./tools/Makefile.in
Fixed so private libraries are not installed publicly.
The installation directories `bin', `include', and `lib' are
created mode 755.
./src/H5.c
./src/H5A.c
./src/H5F.c
./src/H5Fcore.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5R.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Vprivate.h
./src/H5Z.c
./src/H5detect.c
./src/H5private.h
./test/chunk.c
./test/dsets.c
./test/dtypes.c
./test/h5test.c
./test/overhead.c
./test/ragged.c
./test/tattr.c
./tools/h5dump.c
./tools/h5findshd.c
./tools/h5ls.c
Changed `__unused__' to `UNUSED' to fix a conflict with GNU
header files.
./src/H5Tpkg.h
./test/h5test.h
Removed __unused__ from forward function declarations.
./src/H5P.c
Removed a comment about restrictions for the type conversion
temporary buffers. Thanks to Quincey, the comment no longer
applied.
./src/H5T.c
Relaxed the H5Tpack() a little so it would pack compound data
structures that had non-transient atomic members.
./tools/h5ls.c
Added a `-g' (or `--group') flag that causes information to be
printed about the specified group instead of the group's
contents. (sort of like Unix's `ls -d'). The `-g' can be used
in combination with `-r' to print information about the group
and its contents.
./configure [REGENERATED]
./src/H5D.c
./src/H5O.c
Removed H5AC, H5B, and H5T from the default list of packages
to debug (because they're pretty expensive debugging), and
added H5O. Also fixed a bug for undefined variable in H5D when
H5S debugging is turned on but H5T debugging is turned off.
./config/conclude.in
Fixed installation of header files for building in a directory
other than the source directory. This fixes a bug where
H5config.h wasn't being installed.
./src/H5.c
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5I.c
./src/H5Iprivate.h
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
./src/H5Tprivate.h
./src/H5Z.c
./src/H5detect.c
./src/H5private.h
Changed the way the library shuts down again. Now it handles
cycles between packages and isn't so sensitive to dependencies
between packages. A package might shut down only to be
restarted to process a request from some other package being
shut down. Loops are detected after 100 iteractions and the
shutdown is aborted with a message on standard error. This
also makes it a lot easier to debug.
./src/H5A.c
Fixed H5A_write() and H5A_read() so they pass a non-null
background buffer to the conversion functions. This is
necessary when an attribute has a compound data type.
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsec2.c
Reindented new Win32 stuff.
./src/H5Odtype.c
Fixed a bug when enumeration types are used in a compound data
type. The byte pointer wasn't incremented after the type
information was written.
./tools/h5ls.c
Compound data types display their total size because it's not
always obvious from looking at the members.
Scalar attributes show their space as `scalar' instead of
`{}'.
The index value is not printed for attributes that have only a
few values. Instead the word `Data:' is printed on the first
line of attribute data.
Named types display their data type only if verbose output was
requested.
----------------------
./Makefile.in
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./config/commence.in
./config/conclude.in
./config/dec-osf4.x
./config/depend.in
./config/freebsd
./config/linux-gnu
./config/linux-gnulibc1
./config/linux-gnulibc2
./config/solaris2.x
./examples/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./tools/testh5dump.sh
Changes that allow hdf5 to be configured and compiled in a
directory other than the source directory. This is especially
useful if you want to concurrently compile with different
compilers and/or compile flags, or if the hdf5 source is on
read-only media like a CDROM. The changes were surprisingly
easy ;-) Here's what you can do now...
$ mkdir /tmp/build1 # or something
$ cd /tmp/build1
$ /cdrom/hdf5/configure # where ever the source is
$ make
Paul, you'll have to change the testh5toh4 script similar to
the way I changed testh5dump.sh. I started working on it but
then gave up because of a number of problems: (1) I had to
comment out all the tests that let h5toh4 choose the output
file name because it always tried to put the output file in
the same directory as the input file, (2) if path names are
used during the h4 dump then they interfere with the
diff. The test works fine when run in the source directory,
but try this instead:
$ gunzip <hdf5-1.1.67.tar.gz |tar xf -
$ chmod -R ugo-w hdf5-1.1.67
$ mkdir build
$ cd build
$ ../hdf5-1.1.67/configure
$ make check
Dan, I didn't modify the pablo/Makefile.in because I have no
way to test it. I think all you need to do is add a couple
lines before the @COMMENCE@ line and add a couple search
directories for header files. Anyway, it seems like almost an
exact duplicate of the src/Makefile.in, so it shouldn't be a
problem...
./Makefile.in
Removes a few more temporary files during make clean and
distclean.
./configure.in
I fixed the creation of the time-stamp files so that the
initial make doesn't have to regenerated all the makefiles
(only GNU make users will see any change).
./src/H5R.c
Changed a return type from `intn' to `int' for an API
function.
./src/H5detect.c
Added the volatile qualifier to a couple more variables.
./tools/h5tools.c
Fixed a compiler warning about an unused local.
./tools/h5toh4.c
Initialized `optind' to 1 because it's zero on my system. It
should always be one on a unix system.
./tools/testh5toh4
Redirected "broken pipe" messages to /dev/null so outut is
formatted correctly.
----------------------
./config/*-aix4.* [REMOVED]
./config/*-aix4.x [NEW]
./config/solaris2.5 [REMOVED]
./config/solaris2.x [NEW]
./configure.in
./configure [REGENERATED]
./MANIFEST
Changed the names of the IBM-SP2 config files by replacing the
minor version numbers with an `x'. The solaris config warns
about old versions of gcc.
The RUNSERIAL value is set to the empty string by default. The
config/* file (or user) can override it by setting it to some
other value.
The `--enable-parallel' with no flags turns on the
HAVE_PARALLEL constant in the source code but doesn't add any
MPI or MPI-IO libraries to the link line.
If we are compiling for parallel then configure checks that we
can actually link a very simple program. This has the benefit
of detecting config errors before we waste time compiling the
entire library.
Configure recognizes `mpcc_r' as a parallel compiler.
./src/H5A.c
./src/H5Apublic.c
Fixed some compiler warnings. Changed the return type of
H5Aget_name() from hssize_t to ssize_t because the name can
never be larger then memory.
----------------------
./INSTALL
Reorganized and added some additional examples.
./MANIFEST
./aclocal.m4 [NEW]
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./bin/ltconfig [NEW]
./bin/ltmain.sh [NEW]
Added tests to determine how to compile shared libraries and
how to link programs with them before the libraries are
installed. Also how to install and uninstall shared
libraries. The configure step also prints the names of the
config files it's trying to load for easier debugging.
./bin/config.guess
./bin/config.sub
Replaced with a newer version from GNU. The changes we made
to that file to report `irix6.x' and `FreeBSD' without version
numbers have been incorporated into configure.in instead. In
the future, do not change these two files (see the top of
configure.in instead). By the way, this update was required to
get shared libraries working.
./config/linux [REMOVED]
./config/linux-gnulibc1 [NEW]
./config/linux-gnu [NEW]
./config/alpha-dec [REMOVED]
./config/alpha-dec-osf4.0 [REMOVED]
./config/dec-osf4.x [NEW]
./config/irix5.3 [REMOVED]
./config/irix5.x [NEW]
./config/irix64 [REMOVED]
./config/freebsd
Moved config files around to agree with output from the new
config.guess. The linux file was split into gnu (RedHat),
gnulibc1, and gnulibc2 versions. The alpha-dec file was
removed (I think it was unused) and the alpha-dec-osf4.0 was
changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and
the irix64 file was renamed to irix6.x. The freebsd file was
changed to point to linux-gnulibc1. These changes were tested
on:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20
OSF1 4.0
./config/alphaev56-dec-osf4.x
./config/irix64
Added warnings similar to linux/freebsd about using compilers
with known bugs.
./config/commence.in
./config/conclude.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Added definitions for shared libraries. This has been tested
on the following systems:
Linux 2.0
Linux 2.1
FreeBSD 3.2
Irix 5.3
Irix64 6.2
Irix64 6.4
HP/UX 10.20 static only
OSF1 4.0
If you want to disable use of shared libraries (you probably
do for development purposes since it takes a lot longer to
compile and because you have to run dynamically linked
programs in a special way if the library hasn't been
installed) then add `--disable-shared' to the configure
command line. This is all documented in the INSTALL file.
./bin/release
Temprarily commented out the MANIFEST checking when running
under svf since svf is about to be replaced by a newer
version. This change only affects error checking during the
release process.
./Makefile.dist
./Makefile.in
Added `make check' which does the same thing as `make _test'
since the former is endorsed by the GNU coding style and
people are used to it. The old `make _test' still works too
(and so does `make test' if you use GNU make).
----------------------
./src/H5.c
./src/H5Smpio.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpublic.h
./src/H5detect.c
./src/H5private.h
./src/H5public.h
./test/big.c
The `long long' type isn't quite as prevalent as we had hoped;
there is at least one system that defines `__int64' but not
`long long'. Therefore, I've temporarily changed all
occurrences of `long long' to `long_long' and then #define
that in H5private.h based on the existence of `long long' or
`__int64'. This gets rid of some #ifdef's in other parts of the code.
The semantics of the hdf5 types are:
*int8_t Exactly one byte
*int16_t At least two bytes. We favor 32-bit integers over
16-bit integers if the 16-bit integer is 4-bytes wide
(Cray)
*int32_t At least four bytes.
*int64_t At least eight bytes
long_long The widest integral integer type
The H5Smpio.c contains debugging code which is non-portable.
./tools/h5ls.c
Changed the order native types are detected so we favor the name `int'
over `short' or `long' if two of them are the same.
./config/conclude.in
Added a rule to make test programs depend on the hdf5 library. This
fixes a minor bug where changing H5detect.c and then running `make
test' caused H5Tinit.c to not be recompiled and therefore the test
files are not relinked.
----------------------
./config/conclude.in
./test/Makefile.in
./tools/Makefile.in
The Makefile $TESTS variable has finally been split into
$TEST_PROGS and $TEST_SCRIPTS with the latter being the names
of shell scripts that need to be run with `/bin/sh'. Now we
don't have to copy each shell script before we run it. NOTE:
THIS CHANGE DOES NOT AFFECT THE PABLO MAKEFILE SINCE THAT FILE
IS A COPY OF A PREVIOUSLY GENERATED MAKEFILE.
./src/Makefile.in
Added H5Snone.c to the source list.
./src/H5G.c
Plugged a memory leak by emptying the object type "isa" table
when the library is closed.
./src/H5Tconv.c
./src/H5Tpkg.h
Added 48 new type functions to take advantage of hardware for
integer type conversions. These functions are not registered
in the conversion table yet because I haven't fully tested
them.
./src/H5Tpkg.h
Removed __unused__ qualifiers from prototypes.
----------------------
./INSTALL
Added instructions about specifying a path for GNU zlib and
HDF4 headers and library.
Added comments for each of the tool names. Added h5toh4 as a
tool name.
./configure.in
./conigure [REGENERATED]
./src/H5config.h.in [REGENERATED]
The config/* scripts get invoked with $CC_BASENAME set the
base name of the compiler in order to make it easier to handle
setting compiler flags for different compilers in a big case
statement. For instance, if $CC has the value
/usr/local/mpi/bin/mpicc -ansi -64
then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not
set if $CC is not set.
Fixed alignment in `configure --help'.
An include and/or library path can be specified for GNU zlib
if configure can't find it in normal places. The "normal"
means wherever your compiler normally searches, including
search paths you've added through environment variables like
CPPFLAGS and LDFLAGS. The INSTALL file has instructions.
The `-ljpeg' library is detected.
If `ssize_t' is not found then a #define is added to
H5config.h similar to what we already do for `size_t'.
We detect the hdf5 header file `mfhdf.h' and libraries
`-lmfhdf' and `-ldf' and if found define the H5TOH4 and
TESTH5TOH4 Makefile variables. The user can specify an
include and/or library path. The INSTALL file has
instructions.
The `RUNTEST' variable has been split into `RUNSERIAL' and
`RUNPARALLEL' because these are different commands. The
makefile still uses `RUNTEST', which defaults to the RUNSERIAL
value. The new testpar/Makefile.in sets RUNTEST to the
RUNPARALLEL value. The default RUNSERIAL value is empty and
the default RUNPARALLEL value is `mpirun -np 2'. These can
both be overridden in the config/* files. To make the value
the empty string set it like `RUNPARALLEL=none' in the
config/* file.
The new testpar/Makefile is generated from testpar/Makefile.in
./config/commence.in
Added the RUNSERIAL and RUNPARALLEL makefile definitions.
./src/Makefile.in
The `H5detect' program is run with RUNSERIAL, which is empty
on all platforms except intel-osf1 (ASCI/Red)
./config/conclude.in
Removed the `.c.a:' implicit rule -- we don't use it any more.
./config/BlankForm
./config/alpha-dec
./config/alpha-dec-osf4.0
./config/freebsd2.2.7
./config/hpux10.20
./config/hpux9.03
./config/intel-osf1
./config/irix5.3
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
All of these files have been updated to hande multiple
compilers. Most of them assume `cc' if CC is not set. The
documentation in `BlankForm' has been updated and
documentation in the other files refer to `BlankForm'.
The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra
library search paths.
./examples/Makefile.in
./test/Makefile.in
./tools/Makefile.in
Simplified by grouping some dependency information together
more succinctly.
The tools Makefile.in has been modified to work with the
`h5toh4' and `testh5toh4' programs. Until Paul checks these
in you may have problems compiling. If so, just create files
h5toh4.c and testh5toh4.c that contain:
#include <stdio.h>
int main(int argc, char *argv[]) {
fprintf(stderr, "%s: not implemented\n", argv[0]);
return 1;
}
./src/H5public.h
Removed definition for `ssize_t' since this is now handled by
configure in H5config.h with a #define.
./MANIFEST
./testpar/Makefile.in [NEW]
Added a makefile for parallel tests. As soon as we get this
working properly we can remove the other four makefiles in
that directory and maintain just one.
----------------------
This checkin is to fix a couple bugs for Jim Reus. Some features are
not fully implemented but it shouldn't break anything.
./config/conclude.in
./test/Makefile.in
`make clean' removes object files from the test directory as
well as a couple more *.h5 temp files.
./config/hpux9.03 [NEW]
New config file for HP/UX 9.03
./src/H5B.c
./src/H5Bprivate.h
./src/H5Fistore.c
./src/H5G.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gstab.c
Not-yet-complete version of object removal.
./src/H5Fistore.c
./src/H5Fprivate.h
Experimental optimizations, disabled by default.
./src/H5Fprivate.h
Default low-level driver was changed to H5F_LOW_SEC instead of
H5F_LOW_STDIO because the sec2 driver is much easier to debug.
./src/H5Fsplit.c
./src/H5G.c
./src/H5Z.c
Changed a couple return statements to HRETURN.
./src/H5Odtype.c
Removed a check for nested compound data types from back when
they weren't implemented that raised an error.
./tools/h5tools.c
Increased temp buffer sizes and added a check for buffer
overflow so we fail an assertion (hopefully). This really
needs to be fixed sometime.
Added support for printing H5T_STRING data types.
----------------------
./Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in
./src/Makefile.in
./test/Makefile.in
Tests are no longer installed for `make install'. Added a new
target `make tests' that builds the tests but doesn't run them.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Added detection of fork() and waitpid(). If present the
contants HAVE_FORK and HAVE_WAITPID will be defined in
H5config.h.
./test/dtypes.c
Minor tweaks for systems that don't have fork() or waitpid().
./MANIFEST
./tools [NEW]
./tools/Makefile.in [NEW]
./tools/h5debug.c [NEW]
./tools/h5import.c [NEW]
./tools/h5ls.c [NEW]
./tools/h5repart.c [NEW]
Added a tools directory and moved tools from the src directory
to here.
----------------------
./MANIFEST
./configure.in
./configure
./Makefile.in
./bin/distdep [NEW]
./config/conclude.in
./config/depend.in
./src/.distdep [NEW]
./test/.distdep [NEW]
Added some code so non-GNU systems have a list of dependencies
between the .c files and the .h files. Hopefully this works
and y'all don't have to keep saying `make clean' each time you
change a header.
On systems with GNU make, GCC, and Perl, the dependency
information is generated automatically from rules in
config/depend.in as has always been done. But now extra files
called `.distdep' (for `distributable dependencies) are left
in each directory and these are part of CVS and thus
releases. (A `make dep' will create dependencies on demand
without doing anything else.)
On systems lacking one or more of the tools above, the various
`.distdep' files are inserted into the end of the Makefiles.
If you do developement on one of these systems you'll have to
update the `.distdep' and/or Makefile by hand, or wait until
you have access to a GNU system and do a `make dep'.
----------------------
./MANIFEST
Added H5Fmpio.c. One way to check that you've properly
included new files is to run `./bin/release none', then unpack
the resulting tar file somewhere and try to compile it. The
tar file will be ./releases/hdf-5.0.0a.tar.
./config/freebsd2.2.1
./config/linux
Added `-ansi'
./acconfig.h
Added definitions for PHDF5 and HAVE_PARALLEL.
./configure.in
Added minimal support for parallel build. Kim and Albert will
have to flesh this out or I can do it if they're more specific
about what they need.
./config/commence.in
Added default value for $(RUNTEST)
./config/conclude.in
`make test' uses value of $(RUNTEST) to run test cases.
./src/Makefile.in
Added PARALLEL_SRC for conditional compilation of H5Fmpio.c
./src/H5D.c
./src/H5Dpublic.h
Added H5Dget_type() for Elena
NOTE: These changes require that configure be rerun. If you're using
GNU make it will happen automatically, otherwise do it by
hand.
----------------------
./INSTALL
./Makefile.dist
./Makefile.in
./config/conclude.in
Some stupid make's don't know what PHONY means. I added
changed config to _config in the default makefile and added
_test to the other makefiles.
./src/H5Psim.c
A `file_offset' argument got changed to `int' accidently that
causes tests to fail on 64-bit machines. I changed it back to
size_t.
./src/H5T.c
Changed a couple printf formats.
----------------------
./config/conclude.in
The maintainer-clean target removes Emacs backup files,
mirroring backup and contrib files, core files, and profile
output files in addition to what it used to remove.
./src/H5D.c
Fixed a buffer allocation bug in the output pipeline.
./src/H5Gnode.c
Fixed a comparison against size_t
./test/Makefile.in
Added the other temporary h5 files to the `MOSTLYCLEAN' var.
./test/cmpd_dset.c
Added four tests for partial I/O. Don't you just love it when
something works on the first try!
Added ability to clean other files. The extra files to remove
should be listed in a make variable with the same name as the
target. For instance, $(MOSTLYCLEAN) is a list of files in
addition to the normal files that should be removed when the
user types `make mostlyclean'.
----------------------
./config/conclude.in
Test work when `.' isn't in $PATH.
./src/H5F.c
./src/H5Fcore.c NEW
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/Makefile.in
./MANIFEST
Added the in-core temporary file driver as an exercise to
clean up some of the H5F package. It speeds up `testhdf5 -o
stab' by 25 percent! If you want to try it you'll need to
recompile everything with `-DH5F_LOW_DFLT=H5F_LOW_CORE'.
Don't expect testhdf5 to ever work since creating a file,
closing it, and then opening it for read-only will fail.
