Fix
Description:
Changed so that only *.c files are run through the tracing
program. This is so the fortran stuff won't return spurious
warnings.
Platforms tested:
Linux
Purpose:
Set compiler flag to force BSD compliance.
Description:
In order to set a socket descriptor into non-blocking mode
via ioctl(2) the Stream driver uses the FIONBIO constant.
Under Solaris this is defined only when compiled as BSD code.
I hope this doesn't break anything.
Platforms tested:
Solaris 5.7
Bug fix
Description:
During a `reconfigure', it wasn't traversing the
subdirectories...
Solution:
Added a loop to the reconfigure logic to do just that.
Platforms tested:
NOT tested...
Bug Fix
Description:
On some platforms, if you don't have . in your PATH, it won't
find the test program it's supposed to run.
Solution:
Changed instead to ./$$test so that it picks up the program in
the current directory.
Platforms tested:
Opus and Linux
Site specific configure files
Description:
Some machines need to specify things during the configure
but they aren't necessary for all machines of that type. Those
site-specific changes should go here. The format of the filename
is:
host-$hostname
where $hostname is the output from the `hostname' command.
Needless to say, this is optional to those sites which don't need
it.
Fix Irix pmake bugs
Description:
Build fails on Irix when builddir != srcdir
Solution:
* acconfig.h
* src/H5config.h.in [REGENERATED]
Added definition for HAVE_STREAM
* config/conclude.in
* config/depend1.in
* config/depend2.in
* config/depend3.in
* config/depend4.in
The `Dependencies' file is located in the source
tree. This fixes bugs for Irix pmake when compiling
outside the source tree. Hopefully it still preserves
Albert's changes which allow concurrent compilations
to not stomp on each other's Dependencies files.
* examples/Dependencies [REGENERATED]
* src/Dependencies [REGENERATED]
* test/Dependencies [REGENERATED]
* tools/Dependencies [REGENERATED]
Regenerated for testing purposes.
Platforms:
i686-pc-linux
mips-sgi-irix6.5
sparc-sun-solaris2.6
Feature
Description:
Most tests are done inside a for-loop. Whenever a test exits
with error, the for-loop does a "exit 1" to exit the make.
"make -i" could not catch and ignore the error status.
Solution:
Replaced "exit 1" with break. At the end of the for-loop,
test if all tests have been run. If not, the for-loop is
ended by the break command, thus raise an error. Now,
'make -i' can catch and ignor it.
Also added the test of variable HDF5_Make_Ignore inside the
for-loop to indicate the desire to ignore errors when the
HDF5_Make_Ignore is set to a non-null/blank string.
Platforms:
Tested on modi4 and eirene.
in the configure script, basically replacing all -L/<path> constructs
with -R/<path> ones so that libtools will pass it along to the compiler
correctly.
Feature "improvement".
Problem:
The Makefile target triggers gmake to redo the whole auto-configure
process if it sees any autoconfigure related files changed. It causes
couple problems. One is that when multiple machines using --srcdir
are running make, they may detect the changes and launch the autoconf
at the same time. These end up as multiple hosts updating the same
srcdir area together--bad things can happen. Another one is that
when one modifies some Makefile.in, then try "make distclean" before
launching the configure process. Instead of cleaning things, it
started a configure, recreate all Makefiles and other files, then
finally come around to do the distclean--who knows what it cleans
by now since the Makefile is changed too. Last problem was that
this auto-process will launch even for command "gmake -n ...".
Solution:
Renamed Makefile target to reconfigure so that the auto-checking
is still available but must be launched explicitedly. If one
wishes to have the auto-checking as default, one may do
alias gmake "\gmake -i reconfigure; gmake \!* ".
Configuration improvement
Problem:
Arabica has a zlib library that is a dynamic lib in /usr/ncsa/lib.
Binary generated would fail to run with a missig libz.so complain
if /usr/ncsa/lib is not in $LD_LIBRARY_PATH. This exposed the
problem that if the binary is linked with -L$mylibpath -lxyz
where libxyz is a dynamic type, the binary can't run if $mylibpath
is not in $LD_LIBRARY_PATH (or equivalent) or as part of the
system default library paths (e.g., /usr/lib, /usr/local/lib).
This problem also caused failures during configure (when trying
to see what format to print long long) and during H5detect.
The base cause is because libtool does not "transfer" the
knowledge of -L$mylibpath to the wrapper file its mode=link
generates.
Solution:
bin/ltmain.sh:
Changed it so that it transfers the libpaths from -Llibpaths
to the wrapper generated. I used the already defined variable
finalize_shlibpath. Not sure it is correct to use it this way.
Need to check on this.
configure.in:
Put in a patch to transfer information from LDFLAGS to LD_LIBRARY_PATH
right before the AC_TRY_RUN. The above fix for ltmain.sh does not
work here because libtool is generated later than this point.
There should be a cleaner way to do this.
Removed the hardcode of NCSA_LT_LINK_EXE because it is no longer
needed.
commence.in:
Removed the hardcode of NCSA_LT_LINK_EXE because it is no longer
needed.
Makefile.in:
Another patch of LDFLAGS to LD_LIBRARY_PATH because I could not
make it to generate H5detect in the wrapper form of libtool.
Need to make it to use the libtool correctly. Later.
Platform tested:
arabica (solaris 2.7)
baldric (solaris 2.6)
The Dependencies files were generated in $srcdir even when
--srcdir is used. It caused conflicts if multiple hosts
are doing make sharing the same $srcdir. It also violated
the rule that --srcdir would not modify the content of $srcdir
which could be on a read-only media like a CD-ROM.
Solution:
Dependencies files are generated in the "current" directory.
Platform tested:
dangermouse (linux), modi4 (IRIX64).
** config/depend1.in
We don't regenerate the Dependencies files if we're compiling in the
source tree because `gcc -MM' doesn't output enough information to
make the result usable when compiling outside the source tree.
** src/H5config.h.in
Regenerated to include HAVE_LIBMPI and HAVE_LIBMPIO because of recent
changes to configure.in
** bin/rpmsync
** config/depend1.in
Tweaks for versions of `make' that can't search directories.
** examples/Dependencies
** src/Dependencies
** test/Dependencies
** testpar/Dependencies
** tools/Dependencies
Regenerated all these with more complete path names.
----------------------
./MANIFEST
./configure.in
./configure [REGENERATED]
Added more checking for `make' features.
./Makefile.in
./doc/Makefile.in
./doc/html/Makefile.in
./doc/html/Tutor/Makefile.in
./examples/Makefile.in
./pablo/Makefile.in
./src/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
./config/commence.in
./config/conclude.in
./config/depend.in [REMOVED]
./config/depend1.in [NEW]
./config/depend2.in [NEW]
./config/depend3.in [NEW]
./config/depend4.in [NEW]
./config/dependN.in [NEW]
The directory search stuff was moved into commence.in, thereby
shortening the Makefile.in prologues.
./doc/html/Dependencies [NEW]
./doc/html/Tutor/Dependencies [NEW]
./examples/Dependencies [NEW]
./src/Dependencies [NEW]
./test/Dependencies [NEW]
./testpar/Dependencies [NEW]
./tools/Dependencies [NEW]
The `.distdep' files were all renamed to `Dependencies' to make them
more obvious. They are required (but may be empty) in every directory
that has a Makefile.in that ends with @CONCLUDE@ (you'll get an
obvious error from make if you forgot to create one).
./bin/trace
./src/H5.c
Added H5E_major_t and H5E_minor_t although tracing only prints the
integer value.
./src/H5E.c
./src/H5Epublic.h
Added tracing information.
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDgass.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5FDstdio.c
Fixed places where FUNC_LEAVE() evaluated it's argument more than
once.
Added tracing information.
Wrapped long lines.
./config/gnu-flags
Fixed a syntax error when we don't have a gnu compiler.
----------------------
./configure.in
./src/H5config.h.in [REGENERATED]
The /usr/ncsa/{include,lib} directories are only added if they
actually exist. This fixes a warning on some systems.
Checks for the <pdb.h> header file and also for either the PDB or Silo
library, and if found prepares to compile the pdb2hdf program.
./config/distdep
Relative path names for include files are changed to base names since
the makefile contains the logic for searching and since it's likely
that building the .distdep files happed from a location other than
where they would be used in the file system.
./config/conclude.in
Fixed shell errors when `for' loops iterate over nothing for the
`uninstall' target.
./src/H5D.c
./src/H5Oefl.c
File names for the external files are added to the heap when the
dataset is created instead of when the object header is written. This
fixes a rare infinite recursion bug.
./src/H5FD.c
./src/H5FDpublic.h
Optimization to the free list causes H5FD_alloc() usage to go from >10
seconds to <0.4 second for one example (converting a 30MB equation of
state file from PDB to HDF5 format). The optimization is to simply
keep track of the largest item in the free list and not search the
free list when the largest item is not big enough to satisfy the
request.
./src/H5FDcore.c
./src/H5FDcore.h
./test/h5test.c
If the `backing_store' property is true then a flush causes the entire
contents of memory to be written to the specified file. This is in
preparation for the ASCI/red optimizations and is currently tested by
the pdb2hdf `--cached' switch.
./src/H5Odtypes.c
Wrapped three long lines.
./tools/Makefile.in
./tools/pdb2hdf.c [NEW]
A PDB-to-HDF5 translator. It only translates meta data -- the
resulting HDF5 points into the PDB file for the raw data.
ltconfig used just an empty source file to test the share lib
compiler options. SUNSpro CC returns succeed though it issues
a warning too. ltconfig did not like the warning.
Changed it to test with a file containing a simple dummy program.
Platform tested: solaris 2.6 and 2.7
config/solaris2.x:
Changed default compiler to "cc" now that Sunpro CC can produce
static and shared codes correctly.
Also added -s to PROD_CFLAGS to produce leaner binary files.
Problems:
libtool generated compiler linking commands with dependency_libs
appended to any dynamic library used but only "-lz -lmfhdf ..." were
appended but "-L...", if used, are not appended. So, the "-lz ..."
information is incomplete and solaris cc does not allow even if the
"-L..." information is provide in later part of the command.
Solution:
Included $LDFLAGS in the building of $(LIB).
irix5.x:
irix6.x:
Added "-s" to PROD_CFLAGS so that production code are striped for
smaller sizes.
Platform Tested:
Solaris 2.6
----------------------
This extensive change is the virtual file layer implementation. I've
ported and tested the sec2, family, and core drivers and only ported
the mpio driver (Albert will test it). So if you need MPIO I would
recommend sticking with the previous version for a while.
You will get a few compile warnings about split and stdio drivers not
being implemented and possibly tracing information not inserted in
some of the drivers. You can safely ignore them but I plan to fix
them.
I'm still working on the split driver because I just realized that it
needs a part of the VFL that isn't written yet.
Documentation is being updated also because there were some minor
changes (mostly just name changes). It should be available on my web
site later this week.
./MANIFEST
./src/Makefile.in
./src/hdf5.h
./src/H5Flow.c [REMOVED]
./src/H5Fstdio.c [REMOVED]
./src/H5Fsec2.c [REMOVED]
./src/H5Fsplit.c [REMOVED]
./src/H5Fmpio.c [REMOVED]
./src/H5Ffamily.c [REMOVED]
./src/H5Fcore.c [REMOVED]
./src/H5MFpublic.h [REMOVED]
./src/H5FD.c [NEW]
./src/H5FDcore.c [NEW]
./src/H5FDcore.h [NEW]
./src/H5FDfamily.c [NEW]
./src/H5FDfamily.h [NEW]
./src/H5FDmpio.c [NEW]
./src/H5FDmpio.h [NEW]
./src/H5FDprivate.h [NEW]
./src/H5FDpublic.h [NEW]
./src/H5FDsec2.c [NEW]
./src/H5FDsec2.h [NEW]
Removed/added files for virtual file layer.
./bin/trace
./src/H5.c
Removed unused public datatypes and added new VFL public
datatypes.
Changed an error message.
./config/BlankForm
./config/dec-flags
./config/gnu-flags
./config/hpux10.20
./config/hpux9.03
./config/irix5.x
./config/irix6.x
./config/solaris2.x
./config/unicosmk
Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the
configuration since they're no longer applicable. The default
file driver is always the sec2 driver and it always optimizes
calls to lseek() or lseek64().
./config/depend.in
C preprocessor errors generated during automatic dependency
building are sent to /dev/null to prevent them from appearing
twice in the make output.
./src/H5AC.c
./src/H5B.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Oshared.c
./src/H5T.c
./src/H5detect.c
./test/ohdr.c
Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent
with the `haddr_t' datatype which is now a public type.
./src/H5D.c
./src/H5P.c
./src/H5Ppublic.h
./src/H5Tconv.c
./test/cmpd_dset.c
./test/dsets.c
./test/overhead.c
./test/tselect.c
./test/tvltypes.c
The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER
because the properties apply to all types of I/O operations,
not just datasets.
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5R.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Spoint.c
./src/H5Sprivate.h
./test/big.c
./test/h5test.c
./test/istore.c
./testpar/t_dset.c
./testpar/t_file.c
./tools/h5debug.c
./tools/h5ls.c
Modified to work with the virtual file layer by calling H5FD_*
functions instead of H5F_low_* functions and by passing file
access and data transfer properties by object ID instead of
pointer.
Changed H5D_transfer_t to H5FD_mpio_xfer_t since the
COLLECTIVE vs. INDEPENDENT transfer mode is specific to the
MPIO file driver.
Moved MPIO-specific stuff into the MPIO driver.
./src/H5B.c
./src/H5D.c
./src/H5Fprivate.h
The H5F_mpio_* private functions were renamed and placed in
the H5FDmpio driver except those which appeared in H5Smpio.c.
./src/H5E.c
./src/H5Epublic.h
Added major error number H5E_VFL for virtual file layer
related errors.
./src/H5F.c
./src/H5Fprivate.h
Changed the logic that controls whether the boot block is
written. Instead of assuming that the first call to write the
boot block is only to allocate space, I've added a function
argument which makes this explicit.
Changed the way files are compared so that a driver-defined
comparison function can be called. Files which belong to
different drivers are always considered different.
Removed H5F_driver_t since file drivers are now identified by
object ID instead of a special non-user-extendible datatype.
Removed all the hard-coded low-level file properties which
have been replaced by the various file drivers.
./src/H5I.c
./src/H5Iprivate.h
Added the H5I_inc_ref() which was removed a few months ago
since we finally have a use for it.
./src/H5Ipublic.h
Added the H5I_VFL object ID type to identify file drivers in
the virtual file layer.
./src/H5MF.c
./src/H5MFprivate.h
Moved all the allocation/deallocation code into the virtual
file layer which allows file drivers to override much of it.
./src/H5P.c
./src/H5Ppublic.h
Moved file driver-specific code into the various file driver
files.
The H5Pcopy() and H5Pclose() functions make calls into the
virtual file driver to manage the memory for driver-specific
file access and data transfer properties.
./src/H5private.h
./src/H5public.h
The `haddr_t' type is now public.
./test/tfile.c
Added a few more comments.
----------------------
NOTE: These bug fixes but have been applied only to the 1.3 branch per
Albert's request.
./config/gnu-flags [1.3]
Added support for gcc-2.95 by adding full optimization and
debugging flags and applied a patch from Marcus Daniels.
./src/Makefile.in [1.3]
Removes the `libhdf5.settings' file for `make clean'.
----------------------
./Makefile.in [1.3]
./examples/Makefile.in [1.3]
./pablo/Makefile.in [1.3]
./src/Makefile.in [1.3]
./test/Makefile.in [1.3]
./testpar/Makefile.in [1.3]
./tools/Makefile.in [1.3]
./config/commence.in [1.3]
./config/conclude.in [1.3]
./config/depend.in [1.3]
Added a `.PATH' target for Irix pmake which is identical to
the VPATH used by most other `make' programs. Irix 6.5 (or
6.4?) and later `make' ignores VPATH.
Started all beginning-of-line comments with `##' instead of
just `#' because Irix `pmake' barfs on things like the
following because it sees the `# if' as a directive:
# make will barf on the following line
# if running Irix pmake
./config/commence.in [1.3]
Added empty definitions for optional `make' macros because
Irix pmake complains if it sees a macro which has never been
defined. The main body of the Makefiles can redefine these
macros to whatever they need.
----------------------
./configure.in
./configure [REGENERATED]
./src/libhdf5.settings.in [NEW]
./config/conclude.in
./INSTALL
./MANIFEST
A file called `libhdf5.settings' is installed along with the
libraries and it contains a list of various things that might
be of interest to someone using the library (such as what
compiler/options were used and what other libraries might need
to be linked to satisfy external references). We can add more
things as it becomes necessary. Here's a sample...
SUMMARY OF THE HDF5 CONFIGURATION
=================================
HDF5 Version: hdf5-1.1.106
Configured on: Tue Jun 8 11:38:52 EDT 1999
Configured by: matzke@llnl.gov at Spizella Software
Configure mode: development
Host system: i686-pc-linux-gnulibc1
Byte sex: little-endian
Libraries: static, shared
Parallel support: mpicc
Installation point: /usr/local
Compiler: mpicc (egcs-2.91.66)
Compiler switches: -Wall -g
Extra libraries: -lmfhdf -ldf -lz -ljpeg -lm
Archiver: ar
Ranlib: ranlib
Debugged Packages: d,e,f,g,hg,i,mm,o,p,s,v,z
API Tracing: yes
File addresses: large
known so far do not need a "launching command" to run shell script.
(If a future system needs it, maybe we should use a new VARIABLE
called RUNSHELL, default to /bin/sh, to do the launching.)
Then inside the test shell script, it needs to know how to launch
serial or parallel executions. So, pass the RUNSERIAL and RUNPARALLEL
variables to the /bin/sh command.
----------------------
./tools/h5ls.c
Added a `--address' (`-a') switch which causes h5ls to display
file addresses for raw data. For contiguous datasets it's just
a nice simple number, but for chunked datasets it's a list of
logical dataset coordinates, file addresses, filter masks, and
storage sizes.
Changed `--dump' switch to `--data'.
./src/H5D.c
./src/H5F.c
./src/H5Fprivate.h
Enhanced the indexed-storage B-tree iterator so it can dump
raw data addresses (and other info) to the standard error
stream.
Added H5Ddebug() so h5ls has a way to dump addresses for
datasets. I'm not sure what else this API function should do,
so I think we should discuss it before we document it. So far,
h5ls is the only thing that uses it, and we can easily change
that.
./src/H5Tconv.c
./test/dtypes.c
Finally had a chance to verify Paul's H5T_conv_s_s (general
string to string conversions) bug fixes and incorporate them
into H5T_conv_f_f (general floating-point to floating-point
conversions) and H5T_conv_i_i (general integer to integer
conversons). Thanks Paul.
./src/H5D.c
./src/H5S.c
./src/H5Sprivate.h
Added performance timers around data space read and write
callbacks. They were already there for the gather/scatter
callbacks.
The timings for read/write callbacks are displayed along with
gather/scatter when data space debugging is turned on.
./bin/iostats
Updated to print totals. Added a `--fast' option that doesn't
do any output except the totals and is much faster.
./bin/trace
Changed __unused__ to UNUSED to match source code.
./config/gnu-flags
Updated error message for pgcc. I've sent bug reports to the
pgcc people but the new version still has the same bug.
./configure.in
./config/conclude.in
./config/depend.in
Fixed dependencies for non-GNU makes when run in a directory
other than the hdf5 source tree.
Updated GNU `make dep' rules to copy the distributed
dependencies for non-GNU makes into the source tree when run
in some other directory.
----------------------
./tools/h5tools.c
./tools/h5tools.h
Finally fixed a long-standing bug that caused core dumps if
a compound datum rendered to more than some number of
characters (we kept bumping up the limit at the risk of
violating stack size limits on some machines). The fix works
only on systems that have the vsnprintf() function (otherwise
a 4kB limit is imposed, which if violated probably dumps
core). If vsnprintf() is present then the library dynamically
allocates space for the output string.
Also made it possible to control how compound data is rendered
across multiple lines of output by allowing the caller to
specify where optional line-breaks get inserted. The output
functions split up the value at one or more optional
line-breaks to prevent it from wrapping around the screen.
If a datum doesn't fit on the current line but would fit on
the next line then it is printed on the next line regardless
of whether optional line-breaks would have prevent wrapping
around the screen. This makes it easier to find the beginnings
of compound data values. This feature is disabled by default
but can be enabled by the application.
If a datum doesn't fit on the current line and the previous
datum also occupied more than one line then we move to the
next line before printing. This makes it easier to find the
beginnings of compound data values but prevents the output
from looking fragmented if there are only a few long values
among mostly short values. This feature is disabled by
default but can be enabled by the application.
The application can control the printf() formats used for all
the native data types. The defaults are what the library used
to use: %g, %ld, %lu, %d, and %u
./tools/h5ls.c
Compound datatype values can now be split across multiple
lines of output instead of just wrapping. Also, when lots of
compound values are too long they all start at the beginning
of a line. This only required about 10 lines of changes in the
setup for tools library calls (I didn't modify the h5dump
program because it uses its own version of the tools library
that forked off long ago).
Added code for Win32 which is unable to cast `unsigned long
long' to `double'. If the dataset size exceeds (2^63)-1 then
the percent utilization is not displayed (this is easily
possible with chunked datasets). This is untested yet.
./configure.in
./src/H5config.h.in
./src/H5.c
./src/H5private.h
Check for vsnprintf() and provide a simple, stupid definition
if it isn't available. The stupid definition just calls
vsprintf() and ignores the second argument. This can result in
buffer overflows in h5ls and h5dump since vsprintf() is an
unsafe function (and anyone can create an hdf5 file that runs
an arbitrary command from h5ls and h5dump in that case)!
./config/conclude.in
Remove more *.o files for `make clean'
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5I.c
./src/H5Iprivate.h
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
Cleaned up a memory leak during H5_term_library() by allowing
H5I_clear_group() to skip items that couldn't be freed. This
allows the item to remain in the group until we can free it
later.
./src/H5F.c
The H5F_close_all() function fails if a file cannot be closed.
----------------------
./config/commence.in
./examples/Makefile.in
./test/Makefile.in
./testpar/Makefile.in
./tools/Makefile.in
Fixed some dependency problems in Makefiles. If the library
version is updated then everything gets recompiled.
./src/H5G.c
./src/H5R.c
Failure return value for object type functions is now
H5G_UNKNOWN as documented.
./src/H5Shyper.c
./src/H5Spoint.c
Fixed an unused argument warning.
./tools/h5debug.c
Fixed a call to H5F_block_read() since the 4th argument is
different now.
./tools/h5ls.c
Added a space between the object name and class to make the
output readable when the object name is longer than 24
characters.
C
----------------------
./config/depend.in
Fixed automatic dependencies. We were storing dependencies for
*.o files instead of *.lo files after shared libraries were
added.
./config/gnu-flags
./config/linux-gnulibc1
Moved `-march=pentiumpro -mcpu=pentiumpro -malign-double' from
the linux file to this file and caused it to depend on the CPU
name. This fixes one of Elena's bugs.
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dprivate.h
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fmpio.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gnode.c
./src/H5P.c
./src/H5RA.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/H5Tpublic.h
./test/istore.c
Added an H5Dget_storage_size() function that reports the
amount of storage allocated for raw data in a dataset.
Changed H5D_xfer_* to H5F_xfer_* because these properties are
more general than datasets. This also allows some of the
lower-level I/O functions to get this information easier.
./src/H5S.c
./src/H5Sall.c
Added two new functions H5S_all_read() and H5S_all_write()
which are optimizations that copy data directly between file
and memory without having to go through the scatter gather
step. This knocks quite a bit of time off the I/O and
reading/writing entire datasets is a fairly common operation.
./tools/h5ls.c
Reports the logical size of data, the allocated size of data,
and the percent utilization.
./MANIFEST
Removed old pablo files, added new files. Snapshots should now
start to work again.
./src/H5D.c
./src/H5Fmpio.c
Removed two warnings signed vs. unsigned comparisons and check
for overflow.
----------------------
./config/commence.in
./config/conclude.in
./test/Makefile.in
./tools/Makefile.in
Fixed so private libraries are not installed publicly.
The installation directories `bin', `include', and `lib' are
created mode 755.
./src/H5.c
./src/H5A.c
./src/H5F.c
./src/H5Fcore.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5R.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Vprivate.h
./src/H5Z.c
./src/H5detect.c
./src/H5private.h
./test/chunk.c
./test/dsets.c
./test/dtypes.c
./test/h5test.c
./test/overhead.c
./test/ragged.c
./test/tattr.c
./tools/h5dump.c
./tools/h5findshd.c
./tools/h5ls.c
Changed `__unused__' to `UNUSED' to fix a conflict with GNU
header files.
./src/H5Tpkg.h
./test/h5test.h
Removed __unused__ from forward function declarations.
./src/H5P.c
Removed a comment about restrictions for the type conversion
temporary buffers. Thanks to Quincey, the comment no longer
applied.
./src/H5T.c
Relaxed the H5Tpack() a little so it would pack compound data
structures that had non-transient atomic members.
./tools/h5ls.c
Added a `-g' (or `--group') flag that causes information to be
printed about the specified group instead of the group's
contents. (sort of like Unix's `ls -d'). The `-g' can be used
in combination with `-r' to print information about the group
and its contents.
./configure [REGENERATED]
./src/H5D.c
./src/H5O.c
Removed H5AC, H5B, and H5T from the default list of packages
to debug (because they're pretty expensive debugging), and
added H5O. Also fixed a bug for undefined variable in H5D when
H5S debugging is turned on but H5T debugging is turned off.
./config/conclude.in
Fixed installation of header files for building in a directory
other than the source directory. This fixes a bug where
H5config.h wasn't being installed.
./src/H5.c
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5I.c
./src/H5Iprivate.h
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
./src/H5Tprivate.h
./src/H5Z.c
./src/H5detect.c
./src/H5private.h
Changed the way the library shuts down again. Now it handles
cycles between packages and isn't so sensitive to dependencies
between packages. A package might shut down only to be
restarted to process a request from some other package being
shut down. Loops are detected after 100 iteractions and the
shutdown is aborted with a message on standard error. This
also makes it a lot easier to debug.
./src/H5A.c
Fixed H5A_write() and H5A_read() so they pass a non-null
background buffer to the conversion functions. This is
necessary when an attribute has a compound data type.
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsec2.c
Reindented new Win32 stuff.
./src/H5Odtype.c
Fixed a bug when enumeration types are used in a compound data
type. The byte pointer wasn't incremented after the type
information was written.
./tools/h5ls.c
Compound data types display their total size because it's not
always obvious from looking at the members.
Scalar attributes show their space as `scalar' instead of
`{}'.
The index value is not printed for attributes that have only a
few values. Instead the word `Data:' is printed on the first
line of attribute data.
Named types display their data type only if verbose output was
requested.
