Added check-s and check-p targets.
Description:
Added check-s and check-p targets to 1.7 branch to match changes to 1.6
branch. Now parallel and serial tests can be run separately.
Platforms tested:
mir, modi4, copper
improvement.
Description:
hdf5_mpi_complex_derived_datatype_works is hardset to no but
newer IRIX64 systems have it working. Changed the code to
detect the compiler version and set hdf5_mpi_complex_derived_datatype_works
to no for older compilers only.
Platforms tested:
modi4 for the no effect.
Misc. update:
Bug fix/new feature
Description:
Setting "SEMI" or "STRONG" file close degrees causes problems when multiple
file IDs exist for the same file on disk.
Solution:
Make the "SEMI" and "STRONG" settings only apply to the file ID that is
being closed.
Also, add an "H5F_OBJ_LOCAL" flag for the H5Fget_obj_count() &
H5Fget_obj_ids() calls, so that applications can query about objects opened
with a particular file ID instead of all the objects opened in the file on
disk.
Platforms tested:
FreeBSD 4.11 (sleipnir)
h5committest
Fix a compile issue with the SX6 port.
Description:
In cache.c, invalid_configs array was declared as const, which caused
problems when elements of the array were passed to H5Pset_mdc_config()
Solution:
Remove the const modifier from the declaration of invalid_configs.
Platforms tested:
Heping (serial)
Misc. update:
Bug fix
Description:
Fix problems with hyperslab operations with hyperslabs that have count == 0
or block == 0 values. (bugzilla #294)
Solution:
Detect zero sized selections and translate into appropriate action on the
current hyperslab, rather than go through the formality of generating span
trees with zero-sized spans, etc.
Platforms tested:
FreeBSD 4.11 (sleipnir) w/parallel
Too minor to require h5committest
Add C++ High level Debug Test in hdf5check.bat
Description:
C++ High Level Debug Test was missed in the batch file hdf5chek.bat
Solution:
Platforms tested:
Misc. update:
Bug fix
Description:
Various system or software (e.g. MPE) will print some diagnosis
messages to stderr that cannot be suppressed. They messed up
the output matching. Installed the STDERR_FILTER() to remove
all these messages.
Platforms tested:
LANL flash.
Misc. update:
Description:
Doxygen 1.4.2 has a bug that when an \exception immediately
follows a \brief, the exception will be displayed prominently
in the brief section.
Solution:
Temporarily added /// to after \brief to work around this
problem and notified the Doxygen's author.
Platforms tested:
Linux 2.4 (heping) - only in documentation sections
Description:
cpp_doc_config is the configuration file, used by Doxygen to
generate the RM.
RM_stylesheet.css is the style sheet used by the RM html pages; this
style sheet is a modified version from the default doxygen.css.
header.html and header_files are input to produce different page
header than the default.
Platforms tested:
Verified on Windows XP.
Feature.
Description:
The temporary output filename of each remote host test is now
a combination of hostname and configname.
Platforms tested:
Will be tested by Daily test.
Update all.dsw
Description:
Two new project files for high level c++ library and test added into windows/proj/all.dsw
Solution:
Platforms tested:
MSVS 6.0 on windows XP.
Misc. update:
Add batch file to test high level c++ table test.
Description:
Batch file to test high level c++ table test.
Solution:
Platforms tested:
WIndow XP
Misc. update:
Add hdf5 high level c++ test table project file into windows/hl/c++/test
Description:
Catch up with Linux.
Solution:
Platforms tested:
MSVS 6.0 on windows XP.
Misc. update:
Add hdf5 high level c++ library into hdf5/windows/proj
Description:
hdf5 high level c++ library project file was added into windows/proj
Solution:
Platforms tested:
MSVS 6.0 on windows XP.
Misc. update:
Description: Altix configuration file used icc for the default C++ compiler.
Since cobalt moved to Intel 8.1, C++ compilation failed.
Solution: Changed icc to icpc for the default C++ compiler on Altix.
Platforms tested: cobalt
Misc. update:
Configuration feature
Description:
Formerly, bin/reconfigure needed to invoke Automake with the --foreign
flag or it would fail. It turns out that there is a clever way to
specify this flag inside configure.in so that it doesn't need to
be explicitly invoked.
This should make it easier for people not using machines connected
to AFS (e.g., the netCDF folks) to invoke Automake on HDF5.
Platforms tested:
mir and heping
Purpose: Bug fix
Description: The definitions of 2 private functions(test_family_opens()
and test_multi_opens()) fell below the use of them. g++ on sleipnir
complained they weren't declared.
Solution: Moved the definitions above the use of them. Problem solved.
Platforms tested: sleipnir - the only platform complained.
Added documentation
Description:
Added "Automake Use Cases" document to Tech Notes.
This is intended as a reference or an introductory document; more
in-depth documentation is in progress.
Platforms tested:
Change only to documentation. Documentation is viewable on Windows.
Description: Cygwin compiler doesn't do rounding correctly when converting
"unsigned long long" to "long double".
Solution: Added test case to variable detection of
"hdf5_cv_ullong_to_ldouble_precision_works".
Platforms tested: sleipnir, fuss, and shanti - mainly to test configuration,
don't need to run h5committest.
Description: See details from Bug #213. Family member file size wasn't saved
anywhere in file. When family file is opened, the first member size determine
the member size.
Solution: This is the third step of checkin. h5repart has been modified. If h5repart is used
to change the size of family member file, the new size(actual member size) is saved
in the superblock.
In the second step of checkin, multi driver is checked against the driver
name saved in superblock. Wrong driver will result in a failure with an error message indicating
multi driver should be used. This change includes split driver because it's a special case for multi
driver.
In the first step of checkin. Family member size and name template(unused at this stage) are saved
in file superblock. When file is reopened,the size passed in thrin superblock. A different size
will trigger a failure with an error message indicating the right size. Wrong driver to open family
file will cause a failure, too.
Platforms tested: h5committest and fuss
Misc. update: RELEASE.txt
Description: See details from Bug #213. Family member file size wasn't saved
anywhere in file. When family file is opened, the first member size determine
the member size.
Solution: This is the third step of checkin. h5repart has been modified. If h5repart is used
to change the size of family member file, the new size(actual member size) is saved in the superblock.
In the second step of checkin, multi driver is checked against the driver
name saved in superblock. Wrong driver will result in a failure with an error message indicating
multi driver should be used. This change includes split driver because it's a special case for multi
driver.
In the first step of checkin. Family member size and name template(unused at this stage) are saved
in file superblock. When file is reopened,the size passed in thrin superblock. A different size
will trigger a failure with an error message indicating the right size. Wrong driver to open family
file will cause a failure, too.
Platforms tested: h5committest and fuss
Misc. update: RELEASE.txt
Bug fix
Description:
Fortran tests failed because UTF-8 character set flag wasn't initialized
properly.
Solution:
Elena showed me where the flags needs to be initialized. Problem solved.
Platforms tested:
heping, copper, modi4
new fortran parallel test
Description:
added a test that writes and reads several datasets
Solution:
Platforms tested:
linux (intel compiler, tungsten)
AIX (copper)
Misc. update:
Bug fix
Description:
Rearrange functions to make C++ compiler happy.
Platforms tested:
FreeBSD 4.11 (sleipnir) w/CC=g++
Outside of h5committest's scope.
Feature
Description:
Added "support" for UTF-8 character encoding.
Solution:
Wrote tests to check that UTF-8 can be used in a number of places in
HDF5 (object names, data, etc.). These tests live in test/tunicode.c.
Added a new UTF-8 character encoding for datatypes.
Platforms tested:
mir, modi4, heping
Misc. update:
Description:
Description: See details from Bug #213. Family member file size wasn't saved
anywhere in file. When family file is opened, the first member size determine
the member size.
Solution: This is the second step of fixing this bug. Multi driver is checked against the driver
name saved in superblock. Wrong driver will result in a failure with an error message indicating
multi driver should be used. This change includes split driver because it's a special case for multi
driver.
In the first step of checkin. Family member size and name template(unused at this stage) are saved
in file superblock. When file is reopened,the size passed in thrin superblock. A different size
will trigger a failure with an error message indicating the right size. Wrong driver to open family
file will cause a failure, too.
Test program tries to reopen a multi file with default sec2 driver.
The third step will be changing h5repart to let it change family member size in the superblock if
user uses it to change member file size.
Platforms tested: h5committest and fuss.
Description:
Description: See details from Bug #213. Family member file size wasn't saved
anywhere in file. When family file is opened, the first member size determine
the member size.
Solution: This is the second step of fixing this bug. Multi driver is checked against the driver
name saved in superblock. Wrong driver will result in a failure with an error message indicating
multi driver should be used. This change includes split driver because it's a special case for multi
driver.
In the first step of checkin. Family member size and name template(unused at this stage) are saved
in file superblock. When file is reopened,the size passed in thrin superblock. A different size
will trigger a failure with an error message indicating the right size. Wrong driver to open family
file will cause a failure, too.
The third step will be changing h5repart to let it change family member size in the superblock if
user uses it to change member file size.
Platforms tested: h5committest and fuss.
Description: See details from Bug #213. Family member file size wasn't saved
anywhere in file. When family file is opened, the first member size determine
the member size.
Solution: This is the first step of fixing this bug. Member size and name
template(unused at this stage) are saved in file superblock. When file is reopened,
the size passed in through H5Pset_fapl_family is checked against the size saved
in superblock. A different size will trigger a failure with an error message
indicating the right size. Wrong driver to open family file will cause a failure,
too.
Test program tries to verify different wrong ways to reopen file will fail.
The second step will change multi driver that wrong driver will cause a failure.
Platforms tested: fuss and h5committest
Description: See details from Bug #213. Family member file size wasn't saved
anywhere in file. When family file is opened, the first member size determine
the member size.
Solution: This is the first step of fixing this bug. Member size and name
template(unused at this stage) are saved in file superblock. When file is reopened,
the size passed in through H5Pset_fapl_family is checked against the size saved
in superblock. A different size will trigger a failure with an error message
indicating the right size. Wrong driver to open family file will cause a failure,
too.
The second step will change multi driver that wrong driver will cause a failure.
Platforms tested: fuss and h5committest
Bug fix (kind of...)
Description:
When trying to 'make distclean', the Makefiles will attempt to re-run
configure if configure has changed. This is a nice idea, but prevents
the distclean from happening if configure fails (e.g., if the environment
has changed). This happens frequently in the Daily Tests when configure
is altered.
Solution:
It turns out to be easier than I had feared to override the dependency
that is causing configure to be re-run. Now configure will never
be run automatically, even if it is out-of-date.
It would be more complicated to cause it to be re-run in all cases except
distclean, so we'll try just the inelegant fix for now.
Platforms tested:
mir. This change doesn't affect the source, only what is built when.
The real test will be how the Daily Tests handle changes to configure
(like the one I checked in earlier today).
Output tweak
Description:
In configure.in, users must link to zlib library, but configure then
informs them that "deflate" filter is enabled. Changed output slightly
to indicate that these are the same filter.
Platforms tested:
mir (very minor change)
