Autotool Upgrade / Libtool Bug Fix
Description:
Updated autotools referenced in bin/reconfigure as follows:
Autoconf 2.64 --> Autoconf 2.65
Automake 1.11 --> Automake 1.11.1
Libtool 2.2.6a --> Libtool 2.2.6b-mcg
The referenced libtool version is a custom version of 2.2.6b. It
has been tweaked to fix a bug in libtool that occurs
when using PGI 10.0 compilers. A check incorrectly categorizes
the C++ compiler as version 1.0 instead of 10.0, and the link
line is subsequently set up incorrectly and fails to compile.
A patch has been made available and will be included in the next
release of libtool, but in the meantime I've applied the patch to a custom
installation as indicated above. This bin/reconfigure now references
the custom installation, and the resulting configure script will correctly
categorize the PGI 10.0 C++ compiler.
Ran bin/reconfigure to regenerate configure and makefiles.
Tested:
jam and amani with PGI 10.0 compilers.
h5committest
The mixed use of RUNTEST (original) and RUNTESTS (new) caused
confusion. E.g., the timings in test/ was still using the old
$RUNTEST. It made more sense to use $RUNTEST which is used
by the dejagnu feature of automake. So, I changed all
$RUNTEST or $RUNTESTS to $RUNEXEC.
config/commence.am & config/conclude.am are the two files
that got changes. Also fixed an error in test/Makefile.am.
The rest are changed by bin/reconfigure.
Tested: h5committested.
CFLAGS overhaul
Description:
Modified the way configure handles CFLAGS.
(note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS).
1. The configure process will now always preserve a user's CFLAGS
environment variable setup. Any additional flags necessary for compilation
added at configure time will be passed into the Makefiles as AM_CFLAGS,
which is an automake construct to be used in addition to CFLAGS.
This will allow a user to have the final say, as CFLAGS will always appear
later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS
during make will no longer completely erase all flags set by configure,
since they're maintained in AM_CFLAGS.
2. Additionally, where possible, flags previously being assigned directly
into CFLAGS (and thus propagating into h5cc) have now been redirected into
H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into
the h5cc wrapper script as well.
*Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the
Makefiles. Complete description of changes and build process will be
included in a Configure Document that Elena and I are working on.
3. Removed unsupported config files. This includes:
config/dec-osf*
config/hpux11.00
config/irix5.x
config/powerpc-ibm-aix4.x
config/rs6000-ibm-aix5.x
config/unicos*
4. Modified configure summary to display additional values. Specifically,
appropriate AM_* variables are being shown, as well as H5_FCFLAGS and
H5_CXXFLAGS, which were for some reason not already present.
Tested:
- H5committest
- Tested on all THG / NCSA machines, using several combinations of the more
prominent configure options (c++, fortran, szip, threadsafe, parallel,
et cetera). (Thanks to Quincey for rysnc testing setup!)
- With regards to new automated testing, anything *necessary* for
compilation will be caught by the daily tests as it stands now. (i.e.,
if LDFLAGS is not properly set when szip is used, linking will fail).
Additionally, with regards to which flags get into h5cc, if any
*necessary* flags have been improperly removed, then daily tests should
fail during make installcheck. Additional machine-specific desired
behaviors and/or checks may have to be set up separately within the
daily tests, so this is something to work on.
Updating autotools
Description:
Installed new autotools and used them to reconfigure HDF5.
- Automake upgraded to 1.11
- Autoconf upgraded to 2.64
- bin/reconfigure script edited to use new versions (on jam), and
run to generate new configure script and Makefile.in's.
- configure.in script edited to add "_cv_" to all AC_CACHE_VAL strings
(in order to comply with new autoconf standard).
Tested:
Tested on machines jam, smirom, liberty, linew.
Tested w/ features c++, fortran, parallel.
Tested w/ compilers gcc, pgcc, icc.
Further testing via Daily Tests should catch any other outliers. Upon
passing DT's, I'll propogate the new tools into 1.8, hdf4, et cetera.
- Updated bin/reconfigure to use latest version of automake (1.10.2).
Re-generated Makefile.in's by running bin/reconfigure.
- Added libtool version numbers to c++, fortran, hl, hl c++, and hl fortran
libraries.
Tested:
jam, liberty, smirom
Bug Fix
Description:
Fixing BZ #1381. The --includedir=DIR configure option, which is used
to specify the installation location of C header files, did not work
correctly as the path was hard-coded in config/commence.am. I'm presuming
this is because an older version of automake didn't know where to put
c header files. In any case, removing this line now defaults the includedir
to the same directory that it is currently hard-coded to, and also fixes
the configure flag to allow customization of this value.
Tested:
jam, liberty
the way h5ls prints types, it starts searching for NATIVE types first. One solution would be h5ls not to detect these native types, using for example the same print datatype function that h5dump does, that would make the output look the same on all platforms ("32-bit little-endian integer" would be printed instead). Drawback, this "native" information would not be available. Other solution is to have not one but 2 expected outputs and make the shell script detect the endianess and compare with one output or other
tested: h5committest
Description:
- Remove need to set LD_LIBRARY_PATH when using shared szip library.
- Libtool 2.2.6a is now used to generate libraries.
- 'make check install' dependency bug is fixed, and should no longer
break the build.
- removed hard coding of shell in config/commence.am, as this causes
problems on Solaris with the new version of libtool.
- RELEASE.txt with appropriate changes.
Tested:
- kagiso, smirom, linew (merged from 1.8, pretty quick tests)
Remove trailing whitespace from C/C++ source files, with the following
script:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Tested on:
Mac OS X/32 10.5.5 (amazon)
No need for h5committest, just whitespace changes...
Description:
The daily test failure caused by the C++ API was fixed, so put
the packet table test back.
Platforms tested:
SunOS 5.10 (linew)
Linux 2.6 (kagiso)
FreeBSD (duty)
the file didn't have the data. It happened because each handle had its own
object structure, and the empty one overwrote the data with fill value. This is
fixed by making some attribute information like the data be shared in the
attribute structure.
Tested on smirom, kagiso, and linew.
Description:
The fortran Makefile.am used HDF_FORTRAN to indicate it is part of the
Fortran API source so that conclude.am will give fortran api prefix in the
test output. The symbox HDF_FORTRAN is also used in configure for a different
purpose (indicated --enable-fortran). They conflicted.
Similar problem for the symbol HDF_CXX.
Solution:
Changed all the involved Makefile.am to use "FORTRAN_API" instead. It is
a more appropriate name. Same for CXX_API.
Along the way, discovered that the Makefile.am of hl/fortran/test and
hl/cxx/test did not have those symbols at all. Added them in.
Platform tested:
Kagiso only. It is a trivia change.
Improvement.
Description:
src/libhdf5.settings was the initial configure summary and is installed.
Then configure is changed to dump a summary of the configure settings to
the output and also append it to src/libhdf5.settings. That created
two different output formats and duplicated information. This is the
initial attempt to clean up this confusion and unify the output format.
It is decided to use the src/libhdf5.settings template as the unified means.
This requires more macros symbols be defined. The following symbols are
all related to generating the src/libhdf5.settings file.
AC_SUBST(EXTERNAL_FILTERS)
AC_SUBST(MPE) MPE=no
AC_SUBST(STATIC_EXEC) STATIC_EXEC=no
AC_SUBST(HDF_FORTRAN) HDF_FORTRAN=no
AC_SUBST(FC) HDF_FORTRAN=no
AC_SUBST(HDF_CXX) HDF_CXX=no
AC_SUBST(CXX) HDF_CXX=no
AC_SUBST(HDF5_HL) HDF5_HL=yes
AC_SUBST(GPFS) GPFS=no
AC_SUBST(LINUX_LFS) LINUX_LFS=no
AC_SUBST(INSTRUMENT) INSTRUMENT=no
AC_SUBST(CODESTACK) CODESTACK=no
AC_SUBST(HAVE_DMALLOC) HAVE_DMALLOC=no
AC_SUBST(DIRECT_VFD) DIRECT_VFD=no
AC_SUBST(THREADSAFE) THREADSAFE=no
AC_SUBST(STATIC_SHARED)
AC_SUBST(enable_shared)
AC_SUBST(enable_static)
AC_SUBST(UNAME_INFO) UNAME_INFO=`uname -a`
The src/libhdf5.settings.in has CONDITIONAL's added to it too. The
untrue conditions turned into a "#" and these lines are cleaned by the
post processing script.
Platform tested:
h5committest on kagiso, smirom and linew.
Description: Applying update to autotools that was applied to 1.8 a couple
of weeks ago to the trunk.
Updated bin/reconfigure script to reflect the new versions of
libtool and automake in the /home1/packages/ directory.
Rearranged configure.in script. When using libtool 2.2.2, the
libtool script doesn't generate until later in the configuration
process, so I had to move a test that parsed through the libtool
script to a point after where it was actually being generated.
Ran libtoolize on the project, and ran bin/reconfigure to
regenerate configure and Makefile.in's throughout.
Tested: kagiso, smirom, linew (h5committest)
Add work-around to allow reading files that were produced with a buggy
earlier version of the library, which could create objects with the wrong
object header message count. There is now a configure flag
"--enable-strict-format-checks" which triggers a failure on reading a file
with this sort of corruption (when enabled) and allows the object to be read
(when disabled). The default value for the "strict-format-checks" flag is
yes when the "debug" flag is enabled and no when the "debug" flag is disabled.
Note that if strict format checks are disabled (allowing objects with
this particular kind of corruption to be read) and the file is opened with
write access, the library will re-write the object header for the corrupt
object with the correct # of object header messages.
This closes bugzilla bug #1010.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
Add --enable-deprecated-symbols configure option, to allow users to
remove deprecated public API symbols at configure time.
Add bin/make_vers script to bin/reconfigure actions.
Run bin/reconfigure to regenerate autotool components.
Tested on:
Mac OS X/32 10.4.10 (amazon)
FreeBSD/32 6.2 (duty)
Linux/32 2.6 (kagiso)
2) Removing configuration of c++/src/H5cxx_pubconf.h file.
Reasoning: the additional pubconf file caused compilation complications, this is cleaner.
Tested: kagiso, smirom
Description: added new configuration to generate a pubconf file
in the c++/src directory, H5cxx_pubconf.h. When C++
compiler recognizes 'offsetof', the macro
H5_CXX_HAVE_OFFSETOF is defined in the new
pubconf file.
tested: kagiso, smirom
Description: a new configure flag has been created that will now set a macro
in the test/Makefile. The flag is with-default-vfd=. When set to
a virtual file driver (e.g. "--with-default-vfd=sec2"), the macro
DEFAULT_VFD will hold this value.
Tested: kagiso, smirom, linew
file size from MPI_File_get_size. Bypass this problem by replacing it with
stat. Add an option --disable-mpi-size in configure to indicate this function
doesn't work properly. Add a test in testpar/t_mpi.c, too. If it returns wrong
file size, print out a warning.
Tested on kagiso (parallel) because already tested the same change to v1.6 on
several platforms (kagiso, cobalt, copper, and sol).
Description: Multiple copies of Copyright appeared in Makefile.in. This was
due to automake copying the copyright right in the included files such as
config/commence.am.
Solution: Automake treats double hashes as comments and does not copy them
to Makefile.in. Changed all the copyright notices in config/*.am to use
double hashes for the Copyright right notice.
Tested: kagiso via bin/reconfigure.
Tested platform:
Kagiso only since it is only a comment block change. If it works in one
machine, it should work in all, I hope. Still need to check the parallel
build on copper.
The examples had been depending on the build libraries in src, but should have
been depending only on the installed h5cc. Fixed this.
Tested on kagiso (dependency change only, and was unable to replicate the
problem on any system). Real test will be Daily Tests tonight.
It seems that while Cygwin supports the time command, it has trouble with
the syntax
srcdir="../../hdf5/test" time ./testhdf5
and complains.
The solution is to test the above case in configure and not to use the time
command if it fails; Cygwin is fine with
srcdir="../../hdf5/test" ./testhdf5
Tested on Cygwin and kagiso. This feature shouldn't be a major compatibility
problem since every platform but Cygwin is already fine with the current
syntax.
The version of libtool used by HDF5 isn't directly affected by the reconfigure
script; instead, libtoolize --force must be used by hand. Libtool was the
source of the problem, so rolling its version back to 1.5.14 should solve the
issue (at least temporarily).
Reconfigure should still work on both heping and kagiso.
Tested on heping, kagiso, and tg-login3.
Should disable linking against shared libraries in Fortran for compilers that
don't support shared libraries.
Should also fix problem when the wrong Fortran file extension was specified.
If these changes don't solve the Daily Test issues, I'll look at backing out
the autotool version change until I have time to fix them.
Tested on heping, kagiso, juniper.
Clean up some compiler warnings and resolve some inconsistenceis between
hsize_t and size_t in the interface.
Tested on:
FreeBSD/32 4.11 (sleipnir) w/threadsafe
Linux/32 2.4 (heping) w/FORTRAN & C++
Linux/64 2.4 (mir) w/enable-1.6-compat
and quote its arguments. Also checks for the 'socket' library on
Solaris.
If this patch passes the Daily Tests and makes the user happy, I'll
port it back to the 1.6 branch.
Tested on mir and sol.
have an extra parameter that sets the deflate filter.
Added tests, made examples use the new APIs.
Cleaned up include files a little and removed some casts that I hope are
superfluous. If anybody encounters strange errors in the packet table
tests where the chunk size is set to some extremely large value, please
let me know, but I was unable to reproduce this error on any system.
Tested on mir, heping, sol, juniper, VS 6.0. Looked for the chunk size
error on several other systems a month or two ago.
Since these examples need to follow filesystem paths, the Makefiles need
to create directories in the examples directory; added this to the
Makefile.am.
Tested on Windows, mir, juniper
"make check-vfd" will now run all tests in the test directory with different
file drivers (at least, all of those tests that use the testing framework's
FAPL). Tests that fail will be skipped.
This is not a perfect fix, but is better than nothing.
Along with this change, check-vfd should be added to the Daily Tests.
Feature
Description:
Revised Link APIs.
Solution:
New link APIs use H5L*
H5*create_expand do not create links to the objects created; this must
be done manually with H5Llink.
Added APIs to link an object given its ID (H5Llink), to copy links (H5Lcopy),
and changed creation APIs (H5Lcreate_hard and H5Lcreate_soft) and query
API (H5Lget_linkinfo instead of H5Gget_objinfo).
All old APIs are still supported in H5Gdeprec.c .
Platforms tested:
sol, mir, copper
Misc. update:
Forgot to update MANIFEST and release docs. Will do after checkin.
Code cleanup
Description:
Trim trailing whitespace in Makefile.am and C/C++ source files to make
diffing changes easier.
Platforms tested:
None necessary, whitespace only change
Configuration feature
Description:
'make install' now tests both static and shared libraries if both are installed.
Solution:
Previously, shared libraries were only tested when static libraries were not installed.
Also cleaned up line in commence.am that was including HL library in all Makefiles.
Platforms tested:
mir (Makefile change only)
Bug fix - bugzilla #552
Description:
On Cray X1, trying to use : as an argument confused the system.
Solution:
Added a test in configure to see if : as an argument is bad.
If so, skipped the test.
Platforms tested:
mir, Cray X1 (change to configure only)
Bug fix.
Description:
The ${TR}, though avoid the error, is inconvenient. It is needed
because configure.in use the char range in the style of 'a-z'.
The other style of '[a-z]' is more commonly accepted by all tr
but autoconf tends to strip away [], making the syntax rather
clumsy.
Solution:
Learned from autoconf that it avoids the use of character range
by just spell all the letters out. Changed our tr commands to
use those variables defined by autoconf. Also removed the
definition of ${TR} since it will cause inconsistancy when
autoconf also use plain 'tr' in its generated code.
The Makefile.in are changed because the elimination of ${TR} from
configure triggered its removal from all Makefil.in. That is okay
because ${TR} is not used at all in Makefile.
Platforms tested:
h5committested. (sol failed to connected). also tested in shanti
using both /usr/ucb/tr and /bin/tr (the bad one before.)
Misc. update:
Updated both INSTALL and RELEASE files.
Code cleanup, etc.
Description:
Fix some inconsistent coding in the packet table examples
Correct header file issues in C++ packet table wrapper
Platforms tested:
FreeBSD 4.11 (sleipnir) w/C++
Linux 2.4/64 (mir) w/C++ & FORTRAN
Code cleanup
Description:
Big clean up on high-level library code, including:
- Removing include of HDF5 private header file(!)
- Reduce number of compiler warnings
- Untangle header files, etc.
Platforms tested:
FreeBSD 4.11 (sleipnir) w/C++
Linux 2.4/64 (mir) w/C++ & FORTRAN
Several bug fixes
Description:
Added config file for Cray X1 (previous file was misnamed)
Simplified some code in hyperslab.c test that seemed to have been
confusing compiler on Cray X1.
Fixed typo in config/commence.am
Cleaned up hl/src/Makefile.am
Solution:
All four fixes should be straightforward. The failure on Cray was
very difficult to debug, but involved arithmetic errors.
This change seems to fix it.
Platforms tested:
heping, copper, sol, some Cray X1 (more testing when system comes back up)
Bug fix
Description:
When variables were declared in for loops C++ compiler on Cray X1 scoped
them oddly, leading to compilation errors.
Solution:
Moved variable declarations out of for loops (where they probably shouldn't
have been anyway) to the beginning of the function.
Platforms tested:
mir, Cray X1 (minor change)
new feature
Description:
1) separated the HL library into "public" and "private" header files, with the same caracteristics as the basic library
2) added the public headers to hdf5.h (with a conditional include macro, defined in configure.in)
3) added the path to HL in all Makefile.am 's , because of the inclusion in hdf5.h
Solution:
Platforms tested:
linux 32, 64
AIX
solaris
with fortran and c++
(one packet table example fails)
Misc. update:
Bug fix
Description:
Previous checkin did a bad thing; 'make clean' failed in example directories.
Solution:
Fixed commence.am so that examples no longer break, and fixed a mistake
in conclude.am.
Platforms tested:
heping (minor makefile change)
Misc. update:
Bug fix
Description:
make check-clean didn't clean results of example tests
Solution:
Fixed Makefiles so that check-clean recurses into example directories.
Also a little Makefile cleanup.
Platforms tested:
mir, modi4, heping, copper
Copyright fix
Description:
The packet table examples were breaking the copyright checking script.
Fixed them.
Also caught a one-line copyright problem in another file.
Platforms tested:
Only changed comments.
Added high-level example directories
Description:
Refactored common code out of examples Makefiles.am, added high-level
example directories, added packet table examples.
Solution:
Examples now draw from a common config/examples.am file, which
contains rules for installing, uninstalling, and cleaning examples.
High-level example directories are mostly empty, except for the
C and C++ packet table tests.
Platforms tested:
mir, sleipnir, copper, shanti
Code cleanup
Description:
Fix a bunch of warnings flagged by Windows compilers.
Platforms tested:
FreeBSD 4.11 (sleipnir)
Too minor to require h5committest
Cleanup
Description:
Changed comments in C++ packet table code to refer to entries as
"packets" instead of "records."
Solution:
The APIs were changed to correspond to the C API, but the documentation
wasn't. This is fixed.
Platforms tested:
mir, shanti, sleipnir
Misc. update:
This corresponds to documentation update earlier this week.
Bug fix
Description:
Fortran type generation was broken in two ways. Fixed both.
Solution:
Firstly, there were a couple of path problems. Fixed a typo and
specified the full path of a file.
Secondly, the dependencies weren't right when building with HDF5-specific
commands (make lib, make check-s, etc.). Tweaked dependencies
to fix the problem.
Platforms tested:
mir, modi4, sleipnir
Configure feature
Description:
Added 'make trace' target.
Solution:
Added tracing to 1.7. This was done automatically in 1.6, but left out
of 1.7 until now (oops!).
Tracing in 1.7 only happens manually, when the user types 'make trace.'
Tracing automatically requires more framework than it's worth.
I also fixed a couple of tracing bugs and ran trace.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Before this checkin, 'gmake check-s' would fail if there was a file in
the current directory named 'check-s'.
This is fixed under gmake (not sure how to fix for other makes).
Solution:
check, progs, install, etc. are what gmake calls "phony" targets,
which means that no file should be created. These targets can be
specified by a line of the form
.PHONY: check progs install ...
Automake adds this line for targets it knows about, but HDF5 has a
lot of custom rules. This checkin adds a .PHONY line for those rules.
I believe that only gmake recognizes the .PHONY line (at least, pmake
doesn't seem to), but a partial solution is better than none.
This error should occur very rarely anyway (the user has to manually
create files with names like 'build-check-s' or '_test').
Platforms tested:
mir, sleipnir, modi4
Bug fix/feature
Description:
Added support for -shlib in h5fc and h5c++.
Made check-install use -shlib when only shared libraries have been installed.
Solution:
h5fc and h5c++ didn't recognize -shlib. Stole code from h5cc to link against
shared libraries.
When static libraries are disabled, the examples Makefiles will automatically
use the -shlib option to link against shared libraries. Thus,
--disable-static and make check-install should work together.
Platforms tested:
heping(disable-static, enable-static, fortran, c++), modi4 (disable-static, fortran, c++, parallel, enable-static)
Bug fix
Description:
Failed parallel tests now cause make to exit with an error.
Solution:
Edited config/conclude.am to throw an error if parallel test programs fail.
Platforms tested:
heping, modi4
Bug fix
Description:
Changed configure.in to use an environment variable TR to set the path
to the tr utility.
Solution:
There are two kind of tr on Solaris with slightly different syntax.
HDF5's configure relies on the "standard" tr. Traditionally, HDF5ers
have needed to make sure that the "right" tr was found before the
wrong one in their path; now they can use an environment variable.
Platforms tested:
mir, shanti, sol
Misc. update:
Forgot to update release notes. Off to do that now.
Makefile bug fix
Description:
Previously, automake didn't output rules to build perform/mpi-perf or
the test/gen_* programs.
Now these can be built by typing 'make mpi-perf' (or 'make foo') or by
configuring with --enable-build-all.
Solution:
Automake doesn't like having rules for programs it doesn't build. Tricked
it by having these programs built "sometimes"--whenever the user enables
--build-all. This should be used mostly for testing and to ensure that
these helper programs compile.
***IMPORTANT***
These programs do *not* currently compile. When --enable-build-all is used
(not the default), gen_new_fill fails because it uses an old API. This is
an existing "bug" that has simply been exposed by this checkin.
Platforms tested:
sleipnir, modi4, sol
Misc. update:
bug fix.
Description:
When a parallel test script test fails, make would continue because the
way it was setup inside a for loop. Fixed it by issuing an exit 1 inside
the loop.
There was also a typo error in the newer command comparision that it
must be $${chkname} in order to be valid. Also, the test script itself
was not checked in the newer lists. All fixed.
Platforms tested:
h5committested and also hand tested in heping pp mode.
New feature.
Description:
Added the time command to the make check target to report time usage
of the execute of each test and test scripts. This gives us some idea
how long each test takes and some vague idea it is compute bound or
not.
powerpc-ibm-aix5.x:
Change $RUNPARALLEL default setting to allow it being invoked by the
time command.
Platforms tested:
h5committested.
Feature
Description:
Added H5_CFLAGS, etc. to 1.7 branch.
Now compilation flags can be put in H5_*FLAGS and they'll be used when
building hdf5 but not in h5cc.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Bug fix
Description:
Disabled C++ shared libraries for Sun Workshop compiler.
Solution:
This bug only seems to happen when using the -xarch=v9 flag to compile in
64-bit mode, but disabling shared libraries entirely for this compiler is
an easier fix (I don't know how to detect 64 bit mode from the command line).
The framework for disabling shared libraries for other C++ compilers is
in place.
Platforms tested:
sol, mir, sleipnir, modi4
Bug fix/feature
Description:
Disabled shared libraries for a number of Fortran compilers that don't
support them.
This allows other compilers to support shared Fortran libraries.
Solution:
Added a conditional, SHARED_FORTRAN_CONDITIONAL, which is true if
Fortran supports shared libraries. It is set in configure.in.
Platforms tested:
mir, sleipnir, colonelk, heping
Bug fix
Description:
Building with --disable-static seems to have been broken on several platforms.
Fixed this.
Configure will now disable shared libraries automatically when using pgf90
or when building on Cygwin.
Solution:
To avoid errors when using shared libraries with pgf90 (which I had not
realized were compiler-specific), I had manually set convenience libraries
to use the -static linking flag. Apparently, this is not necessary, and
caused these libraries to be created as empty archives when --disable-static
was used.
Also, some libraries were including other libraries, which was not
necessary.
I also fixed code in configure.in to correctly detect whether shared
or static libraries are enabled, and moved code that disables shared libraries
to before libtool is created (rather than editing libtool after the fact).
Despite repeated warnings that only one shared library can be linked at a
time, I have yet to have shared libraries break the linking of tests on
any system. We'll see if the Daily Tests turn up anything.
Platforms tested:
mir (fortran, C++), sleipnir (C++), modi4 (fortran, C++, parallel),
sol (fortran, C++), cygwin
tidy up.
Description:
MPE option created *.clog file whenever it is executed in MPI.
The cleanup of *.clog files were done in individual Makefile.in.
Often, it is forgotten.
Solution:
Moved the cleaning of *.clog files to CHECK_CLEANFILES in commence.am
so that it is applied whenever check-clean is called.
Platforms tested:
heping pp using MPE.
Bug fixes
Description:
This checkin fixes an occasional error on kelgia on sol during distclean.
It also causes test scripts to depend properly on the programs they're
supposed to be testing.
Solution:
The kelgia bug was due to some files being cleaned by automake and manually.
Removed the manual cleaning in src/Makefile.am.
Test script dependencies now need to be specified manually, since the
makefile can't guess what they test from their name. Currently all test
scripts in a given directory have a single list of dependencies--this was
easy and seems to be sufficient.
These dependencies are listed in the SCRIPT_DEPEND variable in the Makefile.am.
Platforms tested:
heping, mir, modi4, sol
Misc. update:
minor tidy up.
Description:
Changed both test programs and test scripts to use the same suffixes
(.chkexe and .chklog). Changed from .log to .chklog to avoid running
into potential conflicts by other "things" (e.g., config.log).
Tested:
Heping.
Code cleanup
Description:
Trim trailing whitespace, which is making 'diff'ing the two branches
difficult.
Solution:
Ran this script in each directory:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Platforms tested:
FreeBSD 4.11 (sleipnir)
Too minor to require h5committest
Bug fix and improvement.
Description:
The test output were not displayed for parallel tests.
The serial tests output were always displayed whether the test was
actually ran this time or not.
Solution:
Moved the display of test output inside the target where the actual
tests are run.
Platforms tested:
Tested in heping using pp and fortran.
Bug fix and code minor cleanup.
Description:
The attempt to redirect stderr together to the log files were
done in the wrong order such that stderr output goes to where
stdout WAS. Fixed that.
Code minor cleanup--use shell variables to hold the name of the
log file and the test instead of generating them repeatedly. This
makes easier code reading, less crowded and avoid typos.
Only conclude.in is changed. The Makefile.in changes are all
derived from automake.
Platforms tested:
h5committested.
Makefile feature
Description:
'make check-clean' now cleans *.h5 files created by tests as well as
.log and .chkexe files.
Solution:
check-clean is now a separate target in its own right, which cleans less
than mostlyclean (check-clean < mostlyclean < clean < distclean).
Platforms tested:
mir, heping, modi4 (serial and parallel)
Feature: check-clean target
Description:
'make check-clean' cleans up output files from tests.
Solution:
Tests create foo.chkexe and foo.log files. Scripts create foo.chksh and
foo.logsh files. 'make check-clean' will clean these files up so that
the tests can be re-run.
Also suppressed some not-very-useful output of Makefiles when it would
echo commands.
Platforms tested:
mir, sleipnir, modi4
Misc. update:
Improvement
Description:
Add high level c++ dll macro for windows
Solution:
Platforms tested:
MSVS 6.0 on windows XP, cygwin, heping and copper
Misc. update:
Configuration feature
Description:
Serial test output is now stored in log files and printed when all tests
in a directory complete, or when a test fails. This should make test output
more readable and useful.
Also made changes to clean up ii_files directories that are created by some
C++ compilers/linkers.
Also fixed a few minor Makefile bugs.
Solution:
When serial tests run, their output is saved in *.log or *.logsh. While
running, tests only print when they begin and when they complete; their
more specific output (from the log file) is printed if the test fails or
when all tests have completed.
Comments welcome.
Platforms tested:
mir, modi4 (parallel and serial), copper, shanti
Bug fix
Description:
The ".chksh" file for a test script was being created in the "source"
location rather than the build location. This can cause problems when
multiple builds are running because "slower" machines will see the ".cshsh"
file from faster machines and will not run the test script as they should.
Solution:
Use 'basename' command to strip off the path of the script and create
the ".chksh" file in the build location.
Platforms tested:
FreeBSD 4.11 (sleipnir)
h5committest
bug fix.
Description:
-nt is not a universal option for the test command in all platforms.
The use of it in conclude.am cause some platforms to bark at the
Makefile generated.
Solution:
Created a command script bin/newer which tests if file1 is newer
than file2. Replace the "test file1 -nt file2" by
"newer file1 file2".
Platforms tested:
Tested in sol.
Bug fix
Description:
Fixed bugs that caused tests to be unable to find testhdf5.sh during
daily tests, and another that broke sol and shanti.
Solution:
When tests are run, their path is ./$testname .
When scripts are run, their path has no leading "./". Fixed.
Sol and shanti don't recognize the -e option for test, but they do know
-f. Fixed.
Also modified release notes.
Platforms tested:
mir, shanti, heping
Feature: tests now use parallel make and only run once
Description:
When make is invoked in parallel (using the -j option), several tests will
now be run simultaneously. This should speed up testing on a number of
systems.
When a test passes, it creates a foo.chkexe or foo.chksh file, which prevents
the test from running again unless the test or library changes.
Solution:
Most of the changes live in config/conclude.am. Added *.chkexe and *.chksh
files to the list of files to be cleaned at "make mostlyclean" time.
Parallel tests still run one at a time, but use the same make instructions
as serial tests.
Platforms tested:
mir, eirene, sleipnir, pommier, copper, modi4 (some errors occurred, probably
due to the test being run before updating hdf5. Will re-run tests after
checkin.)
bug fix
Description:
check-s and check-p were set as pre-requistics of test. They
would get executed in parallel if parallel make is used. This
could cause problems since serial tests are used to be executed
before parallel tests. It is not known if it is always okay to
run serial and parallel tests in simultantously.
Solution:
Change check-s and check-p as actions of the target test so
that they get executed sequnentially.
Platforms tested:
heping PP.
Added check-s and check-p targets.
Description:
Added check-s and check-p targets to 1.7 branch to match changes to 1.6
branch. Now parallel and serial tests can be run separately.
Platforms tested:
mir, modi4, copper
Cray X1 Port
Description:
Porting 1.7 branch to Cray X1. With these changes, HDF5 builds, but
there are some errors in the tests. Working on the errors.
Solution:
Added nv1-cray file to config directory.
Cleaned up some code in hl/c++ that was causing compiler to complain.
Platforms tested:
Cray X1, mir, sleipnir
Misc. update:
Description: Removed support for SRB driver
Solution: Removed or modified appropriate files; ran reconfigure
to regenerate Makefile.in and configure files.
Platforms tested: heping and shanti
Misc. update: ran bin/chkmanifest on heping
Configuration feature
Description:
Different Fortran compilers mangle function names in different ways
(upper case, lower case, adding underscores). To link between
Fortran and C functions, we need to know what a given function's
name is under a given compiler.
Solution:
Use autoconf's FC_WRAPPERS check to determine the Fortran
naming scheme and define the FC_FUNC_ macro to name our
functions (in H5f90proto.h). Removed references to
our old FNAME macro, as well as flags that indicated whether
function names were upper or lower case.
Platforms tested:
mir, pommier, modi4, copper, more
Bug fix
Description:
On some machines, $RUNSERIAL variable needs to be used to run
tests. Set $RUNTESTS (which is used for non-parallel tests) to
be $RUNSERIAL in configure.am.
Also, since I was updating all Makefiles.in anyway, I updated
commence.am to point to autotools installs in AFS instead of
those on heping.
Platforms tested:
mir, sleipnir, modi4, copper
Purpose:
"Bug fix"
Description:
Hardcoded Makefiles to use /bin/sh instead of letting configure
detect shell automatically. This is what v1.6 does, and avoids
problems on janus.
Platforms tested:
sleipnir, copper, modi4, mir
Feature - conditional compilation
Description:
SRB file driver and tests are now compiled only when SRB is enabled
(using --with-srb during configure).
Solution:
Added an automake conditional in configure.in, altered Makefiles.am in
src and test directories to depend on that conditional.
This should make a nice example for posterity to add conditionally
compiled sources.
Platforms tested:
heping (only configure change)
Purpose:
Added C++ wrapper for Packet Table API.
Description:
Added macro for high-level C++ library (LIBH5CPP_HL), which changes every
Makefile.in.
Added directories for high-level C++ library (though currently only Packet
Table API is supported).
Added both C++ source and tests.
Platforms tested:
sleipnir, mir, modi4
Misc. update:
