Bug fix
Description:
pmake (on modi4, for instance) complains about undefined variables
if it is run without the -V flag, which turns those errors to warnings.
Solution:
Added test to configure.in to see if $MAKE will allow Makefiles
with undefined variables. If not, sets -V flag in AM_MAKEFLAGS.
Ensured that all custom make targets use AM_MAKEFLAGS.
Also defined all variables that caused errors in top-level Makefile.am.
This means that pmake can be used to build hdf5 *from the top level
only*. To run make from a subdirectory, still need to use -V flag
(or use make or gmake).
Platforms tested:
modi4, heping, copper, sleipnir
Purpose:
Bug fix
Description:
Parallel builds were breaking in tools/lib
Solution:
talign didn't realize it depended on libh5tools.la because its
dependencies listed the full path (../../tools/lib/libh5tools.la).
Changed this, and made similar changes in a couple of other
directories.
This checkin should also add the --foreign flag to every Makefile.in
Platforms tested:
sleipnir (minor change)
New feature
Description:
Add basic code for new B-tree implementation. They don't do much yet,
aren't hooked up to anything yet and the format may change, but I'd like to
start getting them into the daily tests.
Platforms tested:
FreeBSD 4.11 (sleipnir) w/parallel
Too minor to require h5committest
Bug fix
Description:
Found the permanant fix to automake/CVS dependency problem
Solution:
Added AM_MAINTAINER_MODE macro to configure.in.
Now automake will never try to regenerate Makefiles, Makefiles.in,
configure, H5config.h, etc. when they are out of date, nor will it
print any warnings.
Developers should be very very careful to use reconfigure script,
and can add --enable-maintainer-mode flag to configure on heping
to regenerate these files correctly.
Platforms tested:
heping sleipnir copper
Bug fix
Description:
Configuration files' timestamps were incorrect.
Solution:
Update Makefiles.in. Also added correct paths to autotools on heping,
so heping build should be able to re-generate configuration files even
if they are still broken.
Platforms tested:
sleipnir
Bug fix
Description:
Dependencies between configure files (aclocal, configure.in, configure,
Makefiles.am and .in) are still causing Makefiles to try to run autotools
during build.
Solution:
Committed all Makefiles.in to update their timestamps.
As a temporary measure, forcibly prevented automake from running
autotools during build by redefining the variables it uses.
Platforms tested:
sleipnir (No changes to Makefile content)
Bug fix
Description:
Different compilers use different flags to include Fortran module files
Solution:
Changed boilerplate to use configure variable rather than hardcoded -M flag.
Platforms tested:
sleipnir, sol, copper
Configuration feature
Description:
HDF5 now uses automake to generate Makefiles
Solution:
Makefile.in files are now generated from Makefile.am files.
To reconfigure (after chaning a Makefile.am or configure.in):
/bin/sh bin/reconfigure.sh
Platforms tested:
Many
Bug Fix/Code Cleanup/Doc Cleanup/Optimization/Branch Sync :-)
Description:
Generally speaking, this is the "signed->unsigned" change to selections.
However, in the process of merging code back, things got stickier and stickier
until I ended up doing a big "sync the two branches up" operation. So... I
brought back all the "infrastructure" fixes from the development branch to the
release branch (which I think were actually making some improvement in
performance) as well as fixed several bugs which had been fixed in one branch,
but not the other.
I've also tagged the repository before making this checkin with the label
"before_signed_unsigned_changes".
Platforms tested:
FreeBSD 4.10 (sleipnir) w/parallel & fphdf5
FreeBSD 4.10 (sleipnir) w/threadsafe
FreeBSD 4.10 (sleipnir) w/backward compatibility
Solaris 2.7 (arabica) w/"purify options"
Solaris 2.8 (sol) w/FORTRAN & C++
AIX 5.x (copper) w/parallel & FORTRAN
IRIX64 6.5 (modi4) w/FORTRAN
Linux 2.4 (heping) w/FORTRAN & C++
Misc. update:
Bug fix.
Description:
The Example dimension size is incorrect. Changed it to 3.
Platforms tested:
Tested in TG-NCSA which detected the error.
Misc. update:
Purpose: Maintenance
Description: h5dwrite/read_f and h5awrite_read_f functions were overloaded
with dims argument being of type INTEGER and INTEGER(HSIZE_T).
We promised to remove overloading in 1.4 release. It was
removed from documentation but not from the source code.
Solution: Finish code cleanup.
Platforms tested: Solaris 2.7 32 and 64 bit, and copper with --enable-
parallel. Windows are broken, so Kent and Xuan
will test it with their changes later.
Misc. update:
Bug fix.
Description:
"make check" failed because the macro "$<" is not known to those
makes.
Solution:
Replace that macro with a string name in the form of a more basic
macro of "$@".
Platforms tested:
h5committested (copper used make.)
Misc. update:
Improvement
Description:
If the library is built in parallel mode, then name the "h5cc" and
"h5fc" programs "h5pcc" and "h5pfc" resp. This saves the user from
worrying about mixing serial and parallel builds of the library and
having to specify the pathnames and so-forth.
Platforms tested:
Linux (w/ parallel & Fortran)
Modi4 (w/ parallel & Fortran)
Sol (Serial & Fortran & C++)
Misc. update:
Updated release/docs/RELEASE
Updated the copyright notice--mostly by rearranging
some text to make them consistent.
Solution:
Platforms tested:
"h5committested"--sol is down, so, no SUn test.
Misc. update:
No longer needed. make check-install or make check does the
checking now.
Platforms tested:
no h5committest since I am removing a script command that is not
needed any more.
Misc. update:
no need to update doucment since it was an internal command
that was never documented.
Update
Description:
Revamped the configuration system. The configurations for the Fortran
and C++ libraries are no longer separate from the "main"
configuration system. This involved removing the "configure*" and
"aclocal.m4" files from the fortran/ and c++/ subdirectories. Also
merging settings in the config/ subdirectories into the main config/
subdirectory.
Fortran header files had to be modified a little for Linux. It was
checking if it was a Linux machine by some #defines, however with the
-std=c99 switch, these defines weren't there. I added a check for
some other ones which should be there whether the -std=c99 switch is
used or not.
Platforms tested:
Verbena (Fortran & C++)
Sol (Fortran & C++)
Copper (Fortran & C++)
Modi4 (Parallel, Fortran, & C++)
Misc. update:
Code cleanup
Description:
h5pset_preserve_f function changed from an INTEGER to a LOGICAL parameter,
change it here too.
Platforms tested:
h5committested
Code Cleanup
Description:
Warning messages were being produced by the "make" program because
the "docdir" was being specified twice as a target in the generated
Makefiles. This is because the "EXAMPLESDIR" was also defined as
"docdir".
Solution:
Made "EXAMPLESDIR" unique for C, Fortran, and C++ in the commence.in
file and removed EXAMPLESDIR from the Makefile.ins
Platforms tested:
Dangermouse (only affects make system, not code).
Misc. update:
Update
Description:
Updated so that the example programs are built with the new h5fc
script after it's installed. (So you need to cd into the examples/
directory and type "make check" or similar. This is how it is in the
C part).
Platforms tested:
Modi4 (Parallel & Fortran)
Burrwhite (Fortran & C++)
Baldric (Fortran), but make check didn't work because of "libucb.so"
error that I can't fix...)
Misc. update:
Purpose:
Code clean up.
Description:
Many F90 compilers were not happy about character*(*) declarations.
Solution:
Used F90 character(len=*) declarations.
Platforms tested:
Solaris 2.7 and Linux 2.4
Purpose:
Feature Add
Description:
Added "install-example" and "install-all" to the Makefile system.
The behaviour of the "make install*" options:
make install - Installs binaries, libraries, include
files, and example programs.
make install-examples - Installs only the example programs.
The directories are:
${prefix}/doc/hdf5/examples/{c,c++,fortran}
make install-all - Install the binaries, libraries, include
files, example programs, and
documentation. The whole kit-n'-caboodle.
make uninstall-examples - Get rid of those example files (but not
the ${prefix}/doc/hdf5/examples/...
directories)
There's a new bin/ program which helps create directories which are
deeply nested called "mkdirs". It's a simple shell script.
Platforms tested:
Linux
Purpose:
Codemaintenance
Description:
read/write APIs have been changed.
Solution:
Made necessary changes to the source code.
Platforms tested:
Linux, Solaris 2.7, O2K, T3E
Bug fix
Description:
The /bin/csh shell was causing problems if you were using a different
shell than csh (like bash). It couldn't find the compiler.
Solution:
Changed to the more standard /bin/sh
Platforms tested:
Linux
Bug Fix
Description:
We were not propagating the FFLAGS macro. I.e., we were
overwriting it after it was set in the commence.in includes.
Solution:
Include it with a ``@FFLAGS@'' where we'd normally overwrite it
so that it isn't.
Platforms tested:
T3E
Bug fix
Description:
The setting does not work for the --srcdir option as source file names
are hard set in the action lines.
Solution:
Changed the dependence targets to the form of *.lo and the action lines
would use the *.lo files. This way, *.lo files are created when
-srcdir option is used or not. Also added that they all depend on
the C hdf5 library.
Platforms tested:
IRIX64 -64 with --srcdir
Bug Fix
Description:
Wasn't picking up the header files from the proper source and
build directories. There were some funky things happening in
there.
Solution:
Put the correct path in.
Platforms tested:
Modi4
*sigh*
Description:
Wasn't picking up a header file which is in the source directory.
Solution:
Changed some flags so that it does this now.
Platforms tested:
Modi4
Bug Fix 37
Description:
Okay...this is really it now. Sorry for all the other "fixes".
This will take care of the top_builddir macro for the Fortran
interface.
Solution:
Hardcoded the path to the build directory.
Platforms tested:
Modi4.
Purpose:
Updated source code to use new APIs to write/read references
Description and Solution:
Write/read subrotine has extra parameter - size of the reference array.
I modified the source to reflect this change.
Platforms tested:
Solaris 2.6
Adding the Fortran interface to the HDF5 library
Description:
Fortran is now a subdirectory of the HDF5 library tree.
Platforms tested:
Solaris and IRIX (O2K)
