Merge pull request #1984 in HDFFV/hdf5 from ~DYOUNG/netbsd:develop to develop

* commit '0b721858e46a317c370a24115032d5be41688f67':
  Make these scripts relocatable again: derive a relative path for the original installation prefix from the examples prefix.  Use that relative path to locate the current installation prefix, always.  Fall back to an absolute installation prefix if the relative path cannot be derived.
  Get the path to prefix right: needs a ../ to back out of subdirectory c/.
  Make this script relocatable again: derive a relative path for the original installation prefix from the examples prefix.  Use that relative path to locate the current installation prefix, always.  Fall back to an absolute installation prefix if the relative path cannot be derived.
  Let us override the examples directory using --with-examplesdir=DIR. This is handy for NetBSD where HDF5 examples are installed by convention in $prefix/share/examples/hdf5/ rather than in ${prefix}/share/hdf5_examples/, which is the HDF5 default.
  Follow longstanding execv convention for compatibility with NetBSD.
  Under the examples directories, always find the installed HDF5 executables and scripts using @prefix@ instead of a relative path, because the number of ../ in the relative path will be different on NetBSD than on other systems.
  Make the HDF5 configure script grok NetBSD.
  For portability, insulate the HDF5 library from some system macros.
  Not every system has perl installed in /usr/bin/, so change the shebang (#!) line to `/usr/bin/env perl` to locate perl on the PATH.
  For portability, use the POSIX sh(1) string-comparison operator `=` instead of `==`.

bin/checkapi

@@ -1,4 +1,4 @@
-#!/usr/bin/perl -w
+#!/usr/bin/env perl
 #
 # Copyright by The HDF Group.
 # Copyright by the Board of Trustees of the University of Illinois.
@@ -13,6 +13,8 @@
 #
 require 5.003;
 
+use warnings;
+
 # Purpose: insures that API functions aren't called internally.
 # Usage:   checkapi H5*.c
 my $filename = "";

bin/checkposix

@@ -1,5 +1,6 @@
-#!/usr/bin/perl -w
+#!/usr/bin/env perl
 require 5.003;
+use warnings;
 
 #
 # Copyright by The HDF Group.

bin/debug-ohdr

@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 #
 # Copyright by The HDF Group.
 # Copyright by the Board of Trustees of the University of Illinois.

bin/dependencies

@@ -1,4 +1,4 @@
-#!/usr/bin/perl -w
+#!/usr/bin/env perl
 #
 # Copyright by The HDF Group.
 # Copyright by the Board of Trustees of the University of Illinois.
@@ -11,6 +11,8 @@
 # If you do not have access to either file, you may request a copy from
 # help@hdfgroup.org.
 #
+use warnings;
+
 my $depend_file;
 my $new_depend_file;
 my $srcdir;

bin/distdep

@@ -1,4 +1,7 @@
-#!/usr/bin/perl -p
+#!/bin/sh
+#! -*-perl-*-
+eval 'exec perl -p -x -S $0 ${1+"$@"}'
+  if 0;
 #
 # Copyright by The HDF Group.
 # Copyright by the Board of Trustees of the University of Illinois.

bin/errors

@@ -1,5 +1,6 @@
-#!/usr/local/bin/perl -w
+#!/usr/bin/env perl
 require 5.003;
+use warnings;
 use Text::Tabs;
 
 # NOTE: THE FORMAT OF HRETURN_ERROR AND HGOTO_ERROR MACROS HAS

bin/iostats

@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 #
 # Copyright by The HDF Group.
 # Copyright by the Board of Trustees of the University of Illinois.

bin/make_err

@@ -1,6 +1,7 @@
-#!/usr/bin/perl -w
+#!/usr/bin/env perl
 require 5.003;
 $indent=4;
+use warnings;
 
 #
 # Copyright by The HDF Group.

bin/make_overflow

@@ -1,6 +1,7 @@
-#!/usr/bin/perl -w
+#!/usr/bin/env perl
 require 5.003;
 use strict;
+use warnings;
 
 # Global settings
 

bin/make_vers

@@ -1,5 +1,6 @@
-#!/usr/bin/perl -w
+#!/usr/bin/env perl
 require 5.003;
+use warnings;
 
 # Global settings
 # (The max_idx parameter is the only thing that needs to be changed when adding

bin/runbkgprog

@@ -1,5 +1,6 @@
-#!/usr/bin/perl -w
+#!/usr/bin/env perl
 require 5.003;
+use warnings;
 $indent=4;
 
 #

bin/trace

@@ -1,4 +1,4 @@
-#!/usr/bin/perl -w
+#!/usr/bin/env perl
 ##
 # Copyright by The HDF Group.
 # Copyright by the Board of Trustees of the University of Illinois.
@@ -12,6 +12,7 @@
 # help@hdfgroup.org.
 ##
 require 5.003;
+use warnings;
 $Source = "";
 
 ##############################################################################

c++/examples/Makefile.am

@@ -49,8 +49,8 @@ CXX_API=yes
 
 # Where to install examples
 # Note: no '/' after DESTDIR.  Explanation in commence.am
-EXAMPLEDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/c++
-EXAMPLETOPDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples
+EXAMPLEDIR=$(examplesdir)/c++
+EXAMPLETOPDIR=$(examplesdir)
 
 # How to build programs using h5c++
 $(EXTRA_PROG): $(H5CPP)

c++/examples/run-c++-ex.sh.in

@@ -18,7 +18,7 @@
 # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
 #                                                                               #
 # This script will compile and run the c++ examples from source files           #
-# installed in .../share/hdf5_examples/c++ using h5c++.  The                    #
+# installed in @examplesdir@/c++ using h5c++.  The                              #
 # order for running programs with RunTest in the MAIN section below is taken    #
 # from the Makefile.  The order is important since some of the test programs    #
 # use data files created by earlier test programs.  Any future additions should #
@@ -30,9 +30,32 @@
 EXIT_SUCCESS=0
 EXIT_FAILURE=1
 
+#
+# Try to derive the path to the installation $prefix established
+# by ./configure relative to the examples directory established by
+# ./configure.  If successful, set `prefix_relto_examplesdir` to the
+# relative path.  Otherwise, set `prefix_relto_examplesdir` to the
+# absolute installation $prefix.
+#
+# This script uses the value of `prefix` in the user's environment, if
+# it is set, below.  The content of $() is evaluated in a sub-shell, so
+# if `prefix` is set in the user's environment, the shell statements in
+# $() won't clobbered it.
+#
+prefix_relto_examplesdir=$(
+prefix=@prefix@
+examplesdir=@examplesdir@
+if [ ${examplesdir##${prefix}/} != ${examplesdir} ]; then
+	echo $(echo ${examplesdir##${prefix}/} | \
+	    sed -E 's,[^/]+,..,g')
+else
+	echo $prefix
+fi
+)
+
 # Where the tool is installed.
 # default is relative path to installed location of the tools
-prefix="${prefix:-../../..}"
+prefix="${prefix:-../${prefix_relto_examplesdir}}"
 AR="@AR@"
 RANLIB="@RANLIB@"
 H5TOOL="h5c++"                  # The tool name

config/netbsd

@@ -0,0 +1,56 @@
+#							-*- shell-script -*-
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
+
+
+# This file is part of the HDF5 build script.  It is processed shortly
+# after configure starts and defines, among other things, flags for
+# the various compile modes.
+#
+# See BlankForm in this directory for details.
+
+# The default compiler is `gcc'
+if test "X-" = "X-$CC"; then
+  CC=gcc
+  CC_BASENAME=gcc
+fi
+
+# Figure out C compiler flags
+. $srcdir/config/gnu-flags
+
+# Figure out Intel C compiler flags
+. $srcdir/config/intel-flags
+
+# The default Fortran 90 compiler
+if test "X-" = "X-$FC"; then
+    case $CC_BASENAME in
+        gcc*|pgcc*)
+            FC=gfortran
+            FC_BASENAME=gfortran
+            ;;
+        icc*)
+            FC=ifort
+            FC_BASENAME=ifort
+            ;;
+        mpicc*)
+            FC=mpif90
+            FC_BASENAME=mpif90
+            ;;
+    esac
+fi
+
+# Figure out FORTRAN compiler flags
+. $srcdir/config/gnu-fflags
+
+# Figure out Intel F90 compiler flags
+. $srcdir/config/intel-fflags
+

configure.ac

@@ -232,6 +232,9 @@ case $host_os in
   freebsd*)
     host_os_novers=freebsd
     ;;
+  netbsd*)
+    host_os_novers=netbsd
+    ;;
   solaris*)
     host_os_novers=solaris
     ;;
@@ -2963,6 +2966,28 @@ fi
 ## Checkpoint the cache
 AC_CACHE_SAVE
 
+## ----------------------------------------------------------------------
+## Use custom examples path.
+##
+AC_MSG_CHECKING([for custom examples path definition])
+AC_ARG_WITH([examplesdir],
+            [AS_HELP_STRING([--with-examplesdir=location],
+                            [Specify path for examples
+                            [default="DATAROOTDIR/hdf5_examples"]])],,
+            withval="${datarootdir}/hdf5_examples")
+
+if test "X$withval" = "X"; then
+    AC_MSG_RESULT([default])
+    examplesdir="${datarootdir}/hdf5_examples"
+else
+    AC_MSG_RESULT([$withval])
+    examplesdir=$withval
+fi
+
+AC_SUBST([examplesdir])
+AC_DEFINE_UNQUOTED([EXAMPLESDIR], ["$examplesdir"],
+            [Define the examples directory])
+
 ## ----------------------------------------------------------------------
 ## Enable custom plugin default path for library.  It requires SHARED support.
 ##

examples/Makefile.am

@@ -86,8 +86,8 @@ CHECK_CLEANFILES+=$(EXTLINK_DIRS)
 
 # Example directory
 # Note: no '/' after DESTDIR.  Explanation in commence.am
-EXAMPLEDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/c
-EXAMPLETOPDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples
+EXAMPLEDIR=$(examplesdir)/c
+EXAMPLETOPDIR=$(examplesdir)
 
 # List dependencies for each program.  Normally, automake would take
 # care of this for us, but if we tell automake about the programs it

examples/run-c-ex.sh.in

@@ -18,7 +18,7 @@
 # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
 #                                                                               #
 # This script will compile and run the c examples from source files installed   #
-# in .../share/hdf5_examples/c using h5cc or h5pc.  The order for running       #
+# in @examplesdir@/c using h5cc or h5pc.  The order for running                 #
 # programs with RunTest in the MAIN section below is taken from the Makefile.   #
 # The order is important since some of the test programs use data files created #
 # by earlier test programs.  Any future additions should be placed accordingly. #
@@ -28,10 +28,33 @@
 # Initializations
 EXIT_SUCCESS=0
 EXIT_FAILURE=1
- 
+
+#
+# Try to derive the path to the installation $prefix established
+# by ./configure relative to the examples directory established by
+# ./configure.  If successful, set `prefix_relto_examplesdir` to the
+# relative path.  Otherwise, set `prefix_relto_examplesdir` to the
+# absolute installation $prefix.
+#
+# This script uses the value of `prefix` in the user's environment, if
+# it is set, below.  The content of $() is evaluated in a sub-shell, so
+# if `prefix` is set in the user's environment, the shell statements in
+# $() won't clobbered it.
+#
+prefix_relto_examplesdir=$(
+prefix=@prefix@
+examplesdir=@examplesdir@
+if [ ${examplesdir##${prefix}/} != ${examplesdir} ]; then
+	echo $(echo ${examplesdir##${prefix}/} | \
+	    sed -E 's,[^/]+,..,g')
+else
+	echo $prefix
+fi
+)
+
 # Where the tool is installed.
 # default is relative path to installed location of the tools 
-prefix="${prefix:-../../..}"
+prefix="${prefix:-../${prefix_relto_examplesdir}}"
 PARALLEL=@PARALLEL@             # Am I in parallel mode?
 AR="@AR@"
 RANLIB="@RANLIB@"

fortran/examples/Makefile.am

@@ -74,8 +74,8 @@ endif
 
 # Tell automake how to install examples
 # Note: no '/' after DESTDIR.  Explanation in commence.am
-EXAMPLEDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/fortran
-EXAMPLETOPDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples
+EXAMPLEDIR=$(examplesdir)/fortran
+EXAMPLETOPDIR=$(examplesdir)
 
 # List dependencies for each example.  Normally, automake would take
 # care of this for us, but if we tell automake about the programs it

fortran/examples/run-fortran-ex.sh.in

@@ -18,7 +18,7 @@
 # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
 #                                                                               #
 # This script will compile and run the fortran examples from source files       #
-# installed in .../share/hdf5_examples/fortran using h5fc or h5pfc.  The        #
+# installed in @examplesdir@/fortran using h5fc or h5pfc.  The        #
 # order for running programs with RunTest in the MAIN section below is taken    #
 # from the Makefile.  The order is important since some of the test programs    #
 # use data files created by earlier test programs.  Any future additions should #
@@ -30,9 +30,32 @@
 EXIT_SUCCESS=0
 EXIT_FAILURE=1
 
+#
+# Try to derive the path to the installation $prefix established
+# by ./configure relative to the examples directory established by
+# ./configure.  If successful, set `prefix_relto_examplesdir` to the
+# relative path.  Otherwise, set `prefix_relto_examplesdir` to the
+# absolute installation $prefix.
+#
+# This script uses the value of `prefix` in the user's environment, if
+# it is set, below.  The content of $() is evaluated in a sub-shell, so
+# if `prefix` is set in the user's environment, the shell statements in
+# $() won't clobbered it.
+#
+prefix_relto_examplesdir=$(
+prefix=@prefix@
+examplesdir=@examplesdir@
+if [ ${examplesdir##${prefix}/} != ${examplesdir} ]; then
+	echo $(echo ${examplesdir##${prefix}/} | \
+	    sed -E 's,[^/]+,..,g')
+else
+	echo $prefix
+fi
+)
+
 # Where the tool is installed.
 # default is relative path to installed location of the tools
-prefix="${prefix:-../../..}"
+prefix="${prefix:-../${prefix_relto_examplesdir}}"
 PARALLEL=@PARALLEL@             # Am I in parallel mode?
 AR="@AR@"
 RANLIB="@RANLIB@"

hl/c++/examples/Makefile.am

@@ -33,8 +33,8 @@ CXX_API=yes
 
 # Where to install examples
 # Note: no '/' after DESTDIR.  Explanation in commence.am
-EXAMPLEDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/c++
-EXAMPLETOPDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl
+EXAMPLEDIR=$(examplesdir)/hl/c++
+EXAMPLETOPDIR=$(examplesdir)/hl
 
 # How to build programs using h5c++
 $(EXTRA_PROG): $(H5CPP)

hl/c++/examples/run-hlc++-ex.sh.in

@@ -18,7 +18,7 @@
 # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
 #                                                                               #
 # This script will compile and run the c++ examples from source files           #
-# installed in .../share/hdf5_examples/hl/c++ using h5c++.  The                 #
+# installed in @examplesdir@/hl/c++ using h5c++.  The                           #
 # order for running programs with RunTest in the MAIN section below is taken    #
 # from the Makefile.  The order is important since some of the test programs    #
 # use data files created by earlier test programs.  Any future additions should #
@@ -29,9 +29,33 @@
 # Initializations
 EXIT_SUCCESS=0
 EXIT_FAILURE=1
+
+#
+# Try to derive the path to the installation $prefix established
+# by ./configure relative to the examples directory established by
+# ./configure.  If successful, set `prefix_relto_examplesdir` to the
+# relative path.  Otherwise, set `prefix_relto_examplesdir` to the
+# absolute installation $prefix.
+#
+# This script uses the value of `prefix` in the user's environment, if
+# it is set, below.  The content of $() is evaluated in a sub-shell, so
+# if `prefix` is set in the user's environment, the shell statements in
+# $() won't clobbered it.
+#
+prefix_relto_examplesdir=$(
+prefix=@prefix@
+examplesdir=@examplesdir@
+if [ ${examplesdir##${prefix}/} != ${examplesdir} ]; then
+	echo $(echo ${examplesdir##${prefix}/} | \
+	    sed -E 's,[^/]+,..,g')
+else
+	echo $prefix
+fi
+)
+
 # Where the tool is installed.
 # default is relative path to installed location of the tools
-prefix="${prefix:-../../../..}"
+prefix="${prefix:-../../${prefix_relto_examplesdir}}"
 AR="@AR@"
 RANLIB="@RANLIB@"
 H5TOOL="h5c++"                  # The tool name

hl/examples/Makefile.am

@@ -25,8 +25,8 @@ endif
 
 # Example directory
 # Note: no '/' after DESTDIR.  Explanation in commence.am
-EXAMPLEDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/c
-EXAMPLETOPDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl
+EXAMPLEDIR=$(examplesdir)/hl/c
+EXAMPLETOPDIR=$(examplesdir)/hl
 INSTALL_SCRIPT_FILES = run-hlc-ex.sh
 INSTALL_TOP_SCRIPT_FILES = run-hl-ex.sh
 

hl/examples/run-hlc-ex.sh.in

@@ -18,7 +18,7 @@
 # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
 #                                                                               #
 # This script will compile and run the c examples from source files installed   #
-# in .../share/hdf5_examples/hl/c using h5cc or h5pc.  The order for running    #
+# in @examplesdir@/hl/c using h5cc or h5pc.  The order for running              #
 # programs with RunTest in the MAIN section below is taken from the Makefile.   #
 # The order is important since some of the test programs use data files created #
 # by earlier test programs.  Any future additions should be placed accordingly. #
@@ -29,9 +29,32 @@
 EXIT_SUCCESS=0
 EXIT_FAILURE=1
 
+#
+# Try to derive the path to the installation $prefix established
+# by ./configure relative to the examples directory established by
+# ./configure.  If successful, set `prefix_relto_examplesdir` to the
+# relative path.  Otherwise, set `prefix_relto_examplesdir` to the
+# absolute installation $prefix.
+#
+# This script uses the value of `prefix` in the user's environment, if
+# it is set, below.  The content of $() is evaluated in a sub-shell, so
+# if `prefix` is set in the user's environment, the shell statements in
+# $() won't clobbered it.
+#
+prefix_relto_examplesdir=$(
+prefix=@prefix@
+examplesdir=@examplesdir@
+if [ ${examplesdir##${prefix}/} != ${examplesdir} ]; then
+	echo $(echo ${examplesdir##${prefix}/} | \
+	    sed -E 's,[^/]+,..,g')
+else
+	echo $prefix
+fi
+)
+
 # Where the tool is installed.
 # default is relative path to installed location of the tools
-prefix="${prefix:-../../../..}"
+prefix="${prefix:-../../${prefix_relto_examplesdir}}"
 PARALLEL=@PARALLEL@             # Am I in parallel mode?
 AR="@AR@"
 RANLIB="@RANLIB@"

hl/fortran/examples/Makefile.am

@@ -51,8 +51,8 @@ endif
 
 # Tell automake how to install examples
 # Note: no '/' after DESTDIR.  Explanation in commence.am
-EXAMPLEDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/fortran
-EXAMPLETOPDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl
+EXAMPLEDIR=$(examplesdir)/hl/fortran
+EXAMPLETOPDIR=$(examplesdir)/hl
 
 # List dependencies for each example.  Normally, automake would take
 # care of this for us, but if we tell automake about the programs it

hl/fortran/examples/run-hlfortran-ex.sh.in

@@ -18,7 +18,7 @@
 # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
 #                                                                               #
 # This script will compile and run the fortran examples from source files       #
-# installed in .../share/hdf5_examples/hl/fortran using h5fc or h5pfc.  The     #
+# installed in @examplesdir@/hl/fortran using h5fc or h5pfc.  The               #
 # order for running programs with RunTest in the MAIN section below is taken    #
 # from the Makefile.  The order is important since some of the test programs    #
 # use data files created by earlier test programs.  Any future additions should #
@@ -32,7 +32,7 @@ EXIT_FAILURE=1
 
 # Where the tool is installed.
 # default is relative path to installed location of the tools
-prefix="${prefix:-../../../..}"
+prefix="${prefix:-@prefix@}"
 PARALLEL=@PARALLEL@             # Am I in parallel mode?
 AR="@AR@"
 RANLIB="@RANLIB@"

src/H5private.h

@@ -345,6 +345,14 @@
 #define FAIL    (-1)
 #define UFAIL    (unsigned)(-1)
 
+/* The HDF5 library uses the symbol `ERR` frequently.  So do
+ * header files for libraries such as curses(3), terminfo(3), etc.
+ * Remove its definition here to avoid clashes with HDF5.
+ */
+#ifdef ERR
+#undef ERR
+#endif
+
 /* number of members in an array */
 #ifndef NELMTS
 #    define NELMTS(X)    (sizeof(X)/sizeof(X[0]))
@@ -1645,9 +1653,18 @@ extern char *strdup(const char *s);
 
 /* Assign a variable to one of a different size (think safer dst = (dsttype)src").
  * The code generated by the macro checks for overflows.
+ *
+ * Use w##x##y##z instead of H5_GLUE4(w, x, y, z) because srctype
+ * or dsttype on some systems (e.g., NetBSD 8 and earlier) may
+ * supply some standard types using a macro---e.g.,
+ * #define uint8_t __uint8_t.  The preprocessor will expand the
+ * macros before it evaluates H5_GLUE4(), and that will generate
+ * an unexpected name such as ASSIGN___uint8_t_TO___uint16_t.
+ * The preprocessor does not expand macros in w##x##y##z, so
+ * that will always generate the expected name.
  */
 #define H5_CHECKED_ASSIGN(dst, dsttype, src, srctype)  \
-    H5_GLUE4(ASSIGN_,srctype,_TO_,dsttype)(dst,dsttype,src,srctype)\
+    ASSIGN_##srctype##_TO_##dsttype(dst,dsttype,src,srctype)\
 
 #else /* NDEBUG */
 #define H5_CHECKED_ASSIGN(dst, dsttype, src, srctype)  \

test/accum.c

@@ -1838,7 +1838,6 @@ test_swmr_write_big(hbool_t newest_format)
     pid_t pid;				    /* Process ID */
 #endif /* H5_HAVE_UNISTD_H */
     int status;				    /* Status returned from child process */
-    char *new_argv[] = {NULL};
     char *driver = NULL;        /* VFD string (from env variable) */
     hbool_t     api_ctx_pushed = FALSE;             /* Whether API context pushed */
 
@@ -1968,6 +1967,13 @@ test_swmr_write_big(hbool_t newest_format)
         FAIL_STACK_ERROR;
     }
     else if(0 == pid) { /* Child process */
+        /* By convention, argv[0] tells the name of program invoked.
+         *
+         * execv on NetBSD 8 will actually return EFAULT if there is a
+         * NULL at argv[0], so we follow the convention unconditionally.
+         */
+        char swmr_reader[] = SWMR_READER;
+        char * const new_argv[] = {swmr_reader, NULL};
         /* Run the reader */
         status = HDexecv(SWMR_READER, new_argv);
         HDprintf("errno from execv = %s\n", strerror(errno));

tools/test/h5jam/testh5jam.sh.in

@@ -474,9 +474,9 @@ UNJAMTEST () {
 #
 
 TOOLTEST_OUTPUT() {
-    if [ "$1" == "JAM" ]; then
+    if [ "$1" = "JAM" ]; then
         TOOLCMD=$JAM_BIN/$JAM
-    elif [ "$1" == "UNJAM" ]; then
+    elif [ "$1" = "UNJAM" ]; then
         TOOLCMD=$JAM_BIN/$UNJAM
     fi
     shift