hdf5/config/linux-gnulibc1

325 lines
8.3 KiB
Plaintext
Raw Normal View History

[svn-r335] Changes since 19980330 ---------------------- ./MANIFEST ./src/Makefile.in ./test/Makefile.in Added new files. ./config/linux ./src/H5HL.c ./src/H5HLprivate.h ./src/H5MF.c ./src/H5MFprivate.h Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list. ./html/H5.format.html Updated shared object message information. ./src/H5D.c Datasets can now share data types. ./src/H5F.c Updated a comment that referred to H5ACC_WRITE. ./src/H5HG.c ./src/H5HGprivate.h Moved a few things around. Made debugging better so you can now give a collection address to ./src/debug and it shows some useful stuff. ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c [NEW] ./src/H5Ostab.c Supports shared messages. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h The H5Tshare() function allows the user to give the library hints about how a data type will be used. ./test/shtype.c Tests the H5Tshare() function. ./test/gheap.c Tests the global heap. ./configure.in ./config/BlankForm [NEW] ./config/alpha-dec ./config/freebsd2.2.1 ./config/hpux10.20 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 Cleaned up lots of configuration stuff and made the site configuration files lots easier and more uniform. To make a new file grab the BlankForm and modify it. By default, debugging is turned on for most packages. Within a package one can use `#ifdef H5AC_DEBUG' to wrap debugging code. Other options are: --enable-debug --enable-debug=yes The default, most but not all packages. --disable-debug --enable-debug=no --enable-debug=none The symbol NDEBUG is defined and none of the package debug symbols. --enable-debug=all Debugging is turned on for all packages. This might produce lots of output. --enable-debug=g,d Debugging is turned on for H5G and H5D. A compile mode is also now supported --enable-production --enable-production=yes The library is compiled with optimizations turned on. The compiler flags are augmented by adding PROD_CFLAGS and PROD_CPPFLAGS which are defined in the site config file. --disable-production --enable-production=no The default. The library is compiled for development by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in the site config file. This is usually just `-g'. --enable-production=profile --enable-production=pg Builds a library for profiling by including the flags from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the site config file. This is usullay just `-pg' but it could include optimization flags as well depending on the type of profile one wants. In summary, configure by saying `./configure' and you'll get a development version of the library. Configure by saying `./configure --enable-production --disable-debug' and you'll get a production version with no debugging code.
1998-04-03 11:29:38 +08:00
# -*- shell-script -*-
#
2007-02-15 06:29:52 +08:00
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the COPYING file, which can be found at the root of the source code
# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
# If you do not have access to either file, you may request a copy from
# help@hdfgroup.org.
[svn-r335] Changes since 19980330 ---------------------- ./MANIFEST ./src/Makefile.in ./test/Makefile.in Added new files. ./config/linux ./src/H5HL.c ./src/H5HLprivate.h ./src/H5MF.c ./src/H5MFprivate.h Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list. ./html/H5.format.html Updated shared object message information. ./src/H5D.c Datasets can now share data types. ./src/H5F.c Updated a comment that referred to H5ACC_WRITE. ./src/H5HG.c ./src/H5HGprivate.h Moved a few things around. Made debugging better so you can now give a collection address to ./src/debug and it shows some useful stuff. ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c [NEW] ./src/H5Ostab.c Supports shared messages. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h The H5Tshare() function allows the user to give the library hints about how a data type will be used. ./test/shtype.c Tests the H5Tshare() function. ./test/gheap.c Tests the global heap. ./configure.in ./config/BlankForm [NEW] ./config/alpha-dec ./config/freebsd2.2.1 ./config/hpux10.20 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 Cleaned up lots of configuration stuff and made the site configuration files lots easier and more uniform. To make a new file grab the BlankForm and modify it. By default, debugging is turned on for most packages. Within a package one can use `#ifdef H5AC_DEBUG' to wrap debugging code. Other options are: --enable-debug --enable-debug=yes The default, most but not all packages. --disable-debug --enable-debug=no --enable-debug=none The symbol NDEBUG is defined and none of the package debug symbols. --enable-debug=all Debugging is turned on for all packages. This might produce lots of output. --enable-debug=g,d Debugging is turned on for H5G and H5D. A compile mode is also now supported --enable-production --enable-production=yes The library is compiled with optimizations turned on. The compiler flags are augmented by adding PROD_CFLAGS and PROD_CPPFLAGS which are defined in the site config file. --disable-production --enable-production=no The default. The library is compiled for development by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in the site config file. This is usually just `-g'. --enable-production=profile --enable-production=pg Builds a library for profiling by including the flags from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the site config file. This is usullay just `-pg' but it could include optimization flags as well depending on the type of profile one wants. In summary, configure by saying `./configure' and you'll get a development version of the library. Configure by saying `./configure --enable-production --disable-debug' and you'll get a production version with no debugging code.
1998-04-03 11:29:38 +08:00
# This file is part of the HDF5 build script. It is processed shortly
# after configure starts and defines, among other things, flags for
# the various compile modes.
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
#
# See BlankForm in this directory for details.
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
# The default compiler is `gcc'.
if test -z "$CC"; then
if test "X-$enable_parallel" = "X-yes"; then
# default to use mpicc which is the defacto MPI compiler name
CC=mpicc
CC_BASENAME=mpicc
else
CC=gcc
CC_BASENAME=gcc
fi
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
fi
[svn-r129] Changes since 19970916 ---------------------- ./config/depend.in Fixed backslashes in sed script because the H5Gnode.c dependency info was disappearing. You'll have to rerun config.status to rebuild the Makefiles unless you use gnu make. ./config/conclude.in Also removes emacs backup files, TAGS, and svf backup files. ./config/linux Grouped gcc flags and added provisions for debugging vs. production. ./html/H5.format.html Updated messages 0x0008, 0x0009, and 0x000A. ./html/storage.html Documentation describing storage schemes. ./src/Makefile.in ./test/Makefile.in New source files. ./src/H5A.c ./src/H5Apublic.h ./src/H5C.c Changed VOIDP to void* in a couple places. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Bprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h ./src/H5H.c ./src/H5O.c Removed `const' from some variables because H5G_node_found() wanted to modify it's udata argument. Removing const there caused it to cascade to these other locations. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5H.c ./src/H5O.c Added an extra argument to H5AC_find_f() and H5AC_protect(). This arg gets passed to the load() method. Also added an extra argument to the H5AC_find() macro. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra argument passed to the sizeof_rkey() method. ./src/H5Fprivate.c ./src/H5Fistore.c (new) Added indexed I/O operations. ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h Beginning to add H5G_open/close and related bug fixes. ./src/H5Oprivate.h ./src/H5Oistore.c (new) Added the H5O_ISTORE messsage (0x0008) for indexed storage of objects. ./src/H5private.h Added extra braces around both sides of the FUNC_ENTER() and FUNC_LEAVE() macros so FUNC_ENTER() can appear before declarations or after executable statements the second case is used by H5G_namei() to initialize output arguments to sane values before FUNC_ENTER() might return failure. int f () { int decl1; printf ("This happens before FUNC_ENTER()\n"); FUNC_ENTER (...); int another_declaration; ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra arguments for key encoding and decoding. ./src/H5E.c ./src/H5Epublic.h ./src/H5Fistore.c ./src/H5Oistore.c ./src/H5Oprivate.h Indexed, chunked, sparse storage (not ready for general consumption yet). ./src/H5V.c (new) ./src/H5Vprivate.h (new) ./test/hyperslab.c (new) Vector, array, and hyperslab functions. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Fistore.c ./src/H5Gnode.c ./src/H5V.c ./src/H5Vprivate.h ./test/hyperslab.c Added functionality for indexed storage. ./src/H5F.c Fixed problems with seek optimizing. Recommend we disable it until we can implement it in the file/address class since all of HDF5 must be aware of it. ./src/H5O.c Fixed comeent speling erorr :-) ./MANIFEST Added new files. ./config/conclude.in Added the word `Testing' to the test cases. So if a test program is called hyperslab then the make output will contain the line `Testing hyperslab'. ./config/linux The default file I/O library is Posix section 2 on my linux machine so I can do some I/O performance testing. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Added ability to set size of indexed-storage B-tree. ./src/H5D.c ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gpublic.h ./src/H5Gshad.c ./src/H5Gstab.c ./test/stab.c Changed `directory' to `group' in numerous places. ./src/H5private.h The FILELIB constant can be set on the compile command-line. ./src/istore.c NEW Tests for indexed storage.
1997-10-21 07:14:35 +08:00
# Figure out GNU C compiler flags
[svn-r1151] Changes since 19990318 ---------------------- ./Makefile.in ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./config/commence.in ./config/conclude.in ./config/dec-osf4.x ./config/depend.in ./config/freebsd ./config/linux-gnu ./config/linux-gnulibc1 ./config/linux-gnulibc2 ./config/solaris2.x ./examples/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./tools/testh5dump.sh Changes that allow hdf5 to be configured and compiled in a directory other than the source directory. This is especially useful if you want to concurrently compile with different compilers and/or compile flags, or if the hdf5 source is on read-only media like a CDROM. The changes were surprisingly easy ;-) Here's what you can do now... $ mkdir /tmp/build1 # or something $ cd /tmp/build1 $ /cdrom/hdf5/configure # where ever the source is $ make Paul, you'll have to change the testh5toh4 script similar to the way I changed testh5dump.sh. I started working on it but then gave up because of a number of problems: (1) I had to comment out all the tests that let h5toh4 choose the output file name because it always tried to put the output file in the same directory as the input file, (2) if path names are used during the h4 dump then they interfere with the diff. The test works fine when run in the source directory, but try this instead: $ gunzip <hdf5-1.1.67.tar.gz |tar xf - $ chmod -R ugo-w hdf5-1.1.67 $ mkdir build $ cd build $ ../hdf5-1.1.67/configure $ make check Dan, I didn't modify the pablo/Makefile.in because I have no way to test it. I think all you need to do is add a couple lines before the @COMMENCE@ line and add a couple search directories for header files. Anyway, it seems like almost an exact duplicate of the src/Makefile.in, so it shouldn't be a problem... ./Makefile.in Removes a few more temporary files during make clean and distclean. ./configure.in I fixed the creation of the time-stamp files so that the initial make doesn't have to regenerated all the makefiles (only GNU make users will see any change). ./src/H5R.c Changed a return type from `intn' to `int' for an API function. ./src/H5detect.c Added the volatile qualifier to a couple more variables. ./tools/h5tools.c Fixed a compiler warning about an unused local. ./tools/h5toh4.c Initialized `optind' to 1 because it's zero on my system. It should always be one on a unix system. ./tools/testh5toh4 Redirected "broken pipe" messages to /dev/null so outut is formatted correctly.
1999-03-20 04:09:50 +08:00
. $srcdir/config/gnu-flags
2004-10-09 10:39:07 +08:00
# Figure out PGI C compiler flags
. $srcdir/config/pgi-flags
# Figure out CCE C compiler flags
. $srcdir/config/cce-flags
2004-10-09 10:39:07 +08:00
# Figure out Intel C compiler flags
. $srcdir/config/intel-flags
# Use default Fortran 90 compiler according to what C compiler is used.
if test "X-" = "X-$FC"; then
case $CC_BASENAME in
gcc*)
FC=gfortran
FC_BASENAME=gfortran
;;
pgcc*)
FC=pgf90
FC_BASENAME=pgf90
;;
icc*)
FC=ifort
FC_BASENAME=ifort
;;
mpicc*)
FC=mpif90
FC_BASENAME=mpif90
;;
esac
else
case $FC in
# The PGI and Intel compilers are automatically detected below
ifc*|ifort*|pgf90*)
;;
*f95*)
# Figure out which compiler we are using: pgf90 or Absoft f95
RM='rm -f'
tmpfile=/tmp/cmpver.$$
$FC -V >$tmpfile
if test -s "$tmpfile"; then
if( grep -s 'Absoft' $tmpfile > /dev/null) then
FC_BASENAME=f95
fi
if( grep -s 'pgf90' $tmpfile > /dev/null) then
FC_BASENAME=pgf90
fi
fi
$RM $tmpfile
fc_version_info=`$FC -V | grep Absoft`
;;
# The NAG compiler
nagfor*|nagftn*)
RM='rm -f'
tmpfile=/tmp/cmpver.$$
$FC -V >& $tmpfile
if test -s "$tmpfile"; then
if( grep -s 'NAG Fortran' $tmpfile > /dev/null) then
FC_BASENAME=nagfor
fi
fi
fc_version_info=`grep "NAG Fortran" $tmpfile`
echo "compiler '$FC' is $fc_version_info"
$RM $tmpfile
;;
*)
;;
esac
fi
# Figure out GNU FC compiler flags
. $srcdir/config/gnu-fflags
# Figure out PGI FC compiler flags
. $srcdir/config/pgi-fflags
# Figure out CCE FC compiler flags
. $srcdir/config/cce-fflags
# Figure out Intel FC compiler flags
. $srcdir/config/intel-fflags
case $FC_BASENAME in
#
# Absoft compiler
#
f95)
# Set required flag for compiling C stubs
H5_CFLAGS="$H5_CFLAGS"
F9XSUFFIXFLAG=""
# We force compiler to use upper case for external names
# (just in case since this should be a default EIP)
H5_FCFLAGS="$H5_FCFLAGS"
FSEARCH_DIRS=""
# Production
PROD_FCFLAGS=
# Debug
DEBUG_FCFLAGS=
# Symbols
SYMBOLS_FCFLAGS="-g"
NO_SYMBOLS_FCFLAGS="-s"
# Profiling
PROFILE_FCFLAGS="-pg"
# Optimization
HIGH_OPT_FCFLAGS="-O"
DEBUG_OPT_FCFLAGS=
NO_OPT_FCFLAGS=
f9x_flags_set=yes
;;
#
# NAG compiler
#
nagfor)
F9XSUFFIXFLAG=""
# We force compiler to use upper case for external names
# (just in case since this should be a default EIP)
H5_FCFLAGS="$H5_FCFLAGS"
FSEARCH_DIRS=""
# Production
PROD_FCFLAGS=
# Debug
DEBUG_FCFLAGS="-C"
# Symbols
SYMBOLS_FCFLAGS="-g"
NO_SYMBOLS_FCFLAGS="-s"
# Profiling
PROFILE_FCFLAGS="-pg"
# Optimization
HIGH_OPT_FCFLAGS="-O"
DEBUG_OPT_FCFLAGS="-O0"
NO_OPT_FCFLAGS="-O0"
f9x_flags_set=yes
;;
esac
# The default C++ compiler
# The default compiler is `g++'.
if test -z "$CXX"; then
CXX=g++
CXX_BASENAME=g++
fi
# Figure out GNU CXX compiler flags
. $srcdir/config/gnu-cxxflags
# compiler version strings
# check if the compiler_version_info is already set
if test -z "$cc_version_info"; then
case $CC in
# whatever matches *pgcc* will also match *gcc*, so this one must come first
*pgcc*)
cc_version_info=`$CC $CFLAGS $H5_CFLAGS -V 2>&1 | grep 'pgcc'`
;;
*gcc*)
cc_version_info=`$CC $CFLAGS $H5_CFLAGS --version 2>&1 | grep -v 'PathScale' |\
grep 'GCC' | sed 's/\(.*(GCC) [-a-z0-9\. ]*\).*/\1/'`
;;
# this must come before *icc* for the same reason
*mpicc*)
cc_version_info=`$CC $CCFLAGS $H5_CCFLAGS -v 2>&1 | grep 'version' |\
sed 's/^[a-z0-9]* for //' |\
sed 's/\"/\\\"/g' |\
sed 's/^\([a-z]* \)/ built with \1/1'`
cc_version_info=`echo $cc_version_info`
;;
*icc*)
cc_version_info=`$CC $CCFLAGS $H5_CCFLAGS -V 2>&1 | grep 'Version' |\
sed 's/\(Intel.* Compiler\).*\( Version [a-z0-9\.]*\).*\( Build [0-9]*\)/\1\2\3/'`
;;
*)
echo "No match to get cc_version_info for $CC"
;;
esac
fi
# get fortran version info
# check if the compiler_version_info is already set
if test -z "$fc_version_info"; then
case $FC in
*gfortran*)
fc_version_info=`$FC $FCFLAGS $H5_FCFLAGS --version 2>&1 |\
grep 'GCC' | sed 's/\(.*(GCC) [-a-z0-9\. ]*\).*/\1/'`
;;
*mpif90*)
fc_version_info=`$FC $FCFLAGS $H5_FCFLAGS -v 2>&1 | grep 'version' |\
sed 's/^[a-z0-9]* for //' |\
sed 's/\"/\\\"/g' |\
sed 's/^\([a-z]* \)/ built with \1/1'`
fc_version_info=`echo $fc_version_info`
;;
*ifc*|*ifort*)
fc_version_info=`$FC $FCFLAGS $H5_FCFLAGS -V 2>&1 | grep 'Version' |\
sed 's/\(Intel.* Compiler\).*\( Version [a-z0-9\.]*\).*\( Build [0-9]*\)/\1\2\3/'`
;;
*f95*)
# Figure out which compiler we are using: pgf90 or Absoft f95
RM='rm -f'
tmpfile=/tmp/cmpver.$$
$FC -V >$tmpfile
if test -s "$tmpfile"; then
if( grep -s 'Absoft' $tmpfile > /dev/null) then
FC_BASENAME=f95
fi
fi
$RM $tmpfile
fc_version_info=`$FC -V | grep Absoft`
;;
*g95*)
fc_version_info=`$FC $FCFLAGS $H5_FCFLAGS --version 2>&1 |\
grep 'GCC'`
;;
*pgf90*)
fc_version_info=`$FC $FCFLAGS $H5_FCFLAGS -V 2>&1 | grep 'pgf90'`
;;
*nagfor*|*nagftn*)
RM='rm -f'
tmpfile=/tmp/cmpver.$$
$FC -V >& $tmpfile
if test -s "$tmpfile"; then
if( grep -s 'NAG Fortran' $tmpfile > /dev/null) then
FC_BASENAME=nagfor
fi
fi
fc_version_info=`grep "NAG Fortran" $tmpfile`
$RM $tmpfile
echo "compiler '$FC' is $fc_version_info"
;;
*)
echo "No match to get fc_version_info for $FC"
;;
esac
fi
# get c++ version info
# check if the compiler_version_info is already set
if test -z "$cxx_version_info"; then
case $CXX in
*g++*)
cxx_version_info=`$CXX $CXXFLAGS $H5_CXXFLAGS --version 2>&1 |\
grep 'GCC' | sed 's/\(.*(GCC) [-a-z0-9\. ]*\).*/\1/'`
;;
*icpc*)
cxx_version_info=`$CXX $CXXFLAGS $H5_CXXFLAGS -V 2>&1 | grep 'Version' |\
sed 's/\(Intel.* Compiler\).*\( Version [a-z0-9\.]*\).*\( Build [0-9]*\)/\1\2\3/'`
;;
*pgCC*)
cxx_version_info=`$CXX $CXXFLAGS $H5_CXXFLAGS -V 2>&1 | grep 'pgCC'`
;;
*mpicxx*)
cxx_version_info=`$CXX $CXXFLAGS $H5_CXXFLAGS -v 2>&1 | grep 'version' |\
sed 's/^[a-z0-9]* for //' |\
sed 's/^\([a-z]* \)/ built with \1/1'`
cxx_version_info=`echo $cxx_version_info`
;;
*)
echo "No match to get cxx_version_info for $CXX"
;;
esac
fi