hdf5/configure.ac

3880 lines
132 KiB
Plaintext
Raw Normal View History

## Process this file with autoconf to produce configure.
##
## Copyright by The HDF Group.
## Copyright by the Board of Trustees of the University of Illinois.
## All rights reserved.
##
## This file is part of HDF5. The full HDF5 copyright notice, including
## terms governing use, modification, and redistribution, is contained in
## the COPYING file, which can be found at the root of the source code
## distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
## If you do not have access to either file, you may request a copy from
## help@hdfgroup.org.
## ----------------------------------------------------------------------
## Initialize configure.
##
AC_REVISION($Id: configure.ac 22697 2012-08-19 14:35:47Z hdftest $)
AC_PREREQ([2.69])
## AC_INIT takes the name of the package, the version number, and an
## email address to report bugs. AC_CONFIG_SRCDIR takes a unique file
## as its argument.
##
## NOTE: Do not forget to change the version number here when we do a
## release!!!
##
AC_INIT([HDF5], [1.13.0], [help@hdfgroup.org])
AC_CONFIG_SRCDIR([src/H5.c])
AC_CONFIG_HEADERS([src/H5config.h])
AC_CONFIG_AUX_DIR([bin])
AC_CONFIG_MACRO_DIR([m4])
## AM_INIT_AUTOMAKE takes a list of options that should be applied to
## every Makefile.am when automake is run.
AM_INIT_AUTOMAKE([foreign subdir-objects])
2017-03-09 23:54:19 +08:00
m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) # use silent rules where available - automake 1.11
## AM_MAINTAINER_MODE turns off "rebuild rules" that contain dependencies
## for Makefiles, configure, src/H5config.h, etc. If AM_MAINTAINER_MODE
## is enabled, these files will be rebuilt if out of date. This is a
## problem because if users try to build on a machine with
## the wrong versions of autoconf and automake, these files will be
## rebuilt with the wrong versions and bad things can happen.
## Also, CVS doesn't preserve dependencies between timestamps, so
## Makefiles will often think rebuilding needs to occur when it doesn't.
##
## By default, it is enabled. Users can configure with
## --disable-maintainer-mode to prevent running the autotools.
AM_MAINTAINER_MODE([disable])
## ----------------------------------------------------------------------
## Set prefix default (install directory) to a directory in the build area.
## This allows multiple src-dir builds within one host.
AC_PREFIX_DEFAULT([`pwd`/hdf5])
## Run post processing on files created by configure.
## src/H5pubconf.h:
## Generate src/H5pubconf.h from src/H5config.h by prepending H5_ to all
## macro names. This avoid name conflict between HDF5 macro names and those
## generated by another software package that uses the HDF5 library.
## src/libhdf5.settings:
## Remove all lines begun with "#" which are generated by CONDITIONAL's of
## configure.
AC_CONFIG_COMMANDS([pubconf], [
echo "creating src/H5pubconf.h"
sed 's/#define /#define H5_/' <src/H5config.h |\
sed 's/#undef /#undef H5_/' >pubconf
if test ! -f src/H5pubconf.h; then
/bin/mv -f pubconf src/H5pubconf.h
elif (diff pubconf src/H5pubconf.h >/dev/null); then
rm -f pubconf
echo "src/H5pubconf.h is unchanged"
else
/bin/mv -f pubconf src/H5pubconf.h
fi
echo "Post process src/libhdf5.settings"
sed '/^#/d' < src/libhdf5.settings > libhdf5.settings.TMP
cp libhdf5.settings.TMP src/libhdf5.settings
rm -f libhdf5.settings.TMP
])
## It's possible to configure for a host other than the one on which
## configure is currently running by using the --host=foo flag.
## For machines on which HDF5 is often configured, it can be convenient
## to specify the name of the machine rather than its canonical type.
##
## There are currently no hosts, but if there were they would be
## listed by hostname and the alias would point to a file in
## the config directory:
##
##case $host_alias in
## <some host>)
## host_alias=<config file in config directory>
## ;;
##esac
AC_CANONICAL_HOST
AC_SUBST([CPPFLAGS])
AC_SUBST([JNIFLAGS])
AC_SUBST([AR_FLAGS])
## H5_CFLAGS (and company) are for CFLAGS that should be used on HDF5, but
## not exported to h5cc (or h5fc, etc.)
##
## H5_ECFLAGS is for warnings that should be treated as errors.
##
AC_SUBST([H5_CFLAGS])
AC_SUBST([H5_ECFLAGS])
AC_SUBST([H5_CPPFLAGS])
AC_SUBST([H5_FCFLAGS])
AC_SUBST([H5_CXXFLAGS])
AC_SUBST([H5_JNIFLAGS])
AC_SUBST([H5_JAVACFLAGS])
AC_SUBST([H5_JAVAFLAGS])
AC_SUBST([H5_LDFLAGS])
## AM_CFLAGS (and company) are for CFLAGS that should be used on HDF5,
## and WILL be exported to h5cc (or h5fc, etc) if set by configure.
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
AC_SUBST([AM_CFLAGS])
AC_SUBST([AM_FCFLAGS])
AC_SUBST([AM_CXXFLAGS])
AC_SUBST([AM_CPPFLAGS])
AC_SUBST([AM_JNIFLAGS])
AC_SUBST([AM_JAVACFLAGS])
AC_SUBST([AM_JAVAFLAGS])
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
AC_SUBST([AM_LDFLAGS])
## Make sure flags are initialized.
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
AM_CFLAGS="${AM_CFLAGS}"
AM_CXXFLAGS="${AM_CXXFLAGS}"
AM_FCFLAGS="${AM_FCFLAGS}"
AM_CPPFLAGS="${AM_CPPFLAGS}"
AM_JNIFLAGS="${AM_JNIFLAGS}"
AM_JAVACFLAGS="${AM_JAVACFLAGS}"
AM_JAVAFLAGS="${AM_JAVAFLAGS}"
AM_LDFLAGS="${AM_LDFLAGS}"
CFLAGS="${CFLAGS}"
CXXFLAGS="${CXXFLAGS}"
FCFLAGS="${FCFLAGS}"
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
CPPFLAGS="${CPPFLAGS}"
JNIFLAGS="${JNIFLAGS}"
JAVACFLAGS="${JAVACFLAGS}"
JAVAFLAGS="${JAVAFLAGS}"
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
LDFLAGS="${LDFLAGS}"
AR_FLAGS="${AR_FLAGS}"
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
## Configure may need to alter any of the *FLAGS variables in order for
## various checks to work correctly. Save the user's value here so it
## can be restored once all configure checks are complete.
saved_user_CFLAGS="$CFLAGS"
saved_user_CXXFLAGS="$CXXFLAGS"
saved_user_FCFLAGS="$FCFLAGS"
saved_user_JAVACFLAGS="$JAVACFLAGS"
saved_user_JAVAFLAGS="$JAVAFLAGS"
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
saved_user_LDFLAGS="$LDFLAGS"
saved_user_CPPFLAGS="$CPPFLAGS"
## Support F9X variable to define Fortran compiler if FC variable is
## not used. This should be deprecated in the future.
if test "x" = "x$FC"; then
FC=${F9X}
fi
## ----------------------------------------------------------------------
## Dump all shell variables values.
##
AC_MSG_CHECKING([shell variables initial values])
set >&AS_MESSAGE_LOG_FD
AC_MSG_RESULT([done])
## ----------------------------------------------------------------------
## Save system information for the library settings file.
##
AC_SUBST([UNAME_INFO])
UNAME_INFO=`uname -a`
## ----------------------------------------------------------------------
## Some platforms have broken basename, and/or xargs programs. Check
## that it actually does what it's supposed to do. Catch this early
## since configure and scripts relies upon them heavily and there's
## no use continuing if it's broken.
##
AC_MSG_CHECKING([if basename works])
BASENAME_TEST="`basename /foo/bar/baz/qux/basename_works`"
if test $BASENAME_TEST != "basename_works"; then
AC_MSG_ERROR([basename program doesn't work])
else
AC_MSG_RESULT([yes])
fi
## xargs basename used in configure to get the CC_BASENAME value
AC_MSG_CHECKING([if xargs works])
XARGS_TEST="`echo /foo/bar/baz/qux/xargs_works | xargs basename`"
if test $XARGS_TEST != "xargs_works"; then
AC_MSG_ERROR([xargs program doesn't work])
else
AC_MSG_RESULT([yes])
fi
## ----------------------------------------------------------------------
## Check that the cache file was build on the same host as what we're
## running on now.
##
AC_CACHE_CHECK([for cached host], [hdf5_cv_host], [hdf5_cv_host="none"]);
if test $hdf5_cv_host = "none"; then
hdf5_cv_host=$host
elif test $hdf5_cv_host != $host; then
echo "The config.cache file was generated on $hdf5_cv_host but"
echo "this is $host. Please remove that file and try again."
AC_MSG_ERROR([config.cache file is invalid])
fi
## ----------------------------------------------------------------------
## Source any special files that we need. These files normally aren't
## present but can be used by the maintainers to fine tune things like
## turning on debug or profiling flags for the compiler. The search order
## is:
##
## CPU-VENDOR-OS
## VENDOR-OS
## CPU-OS
## CPU-VENDOR
## OS
## VENDOR
## CPU
##
## If the `OS' ends with a version number then remove it. For instance,
## `freebsd3.1' would become `freebsd'
[svn-r1112] Changes since 19990301 ---------------------- ./INSTALL Reorganized and added some additional examples. ./MANIFEST ./aclocal.m4 [NEW] ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./bin/ltconfig [NEW] ./bin/ltmain.sh [NEW] Added tests to determine how to compile shared libraries and how to link programs with them before the libraries are installed. Also how to install and uninstall shared libraries. The configure step also prints the names of the config files it's trying to load for easier debugging. ./bin/config.guess ./bin/config.sub Replaced with a newer version from GNU. The changes we made to that file to report `irix6.x' and `FreeBSD' without version numbers have been incorporated into configure.in instead. In the future, do not change these two files (see the top of configure.in instead). By the way, this update was required to get shared libraries working. ./config/linux [REMOVED] ./config/linux-gnulibc1 [NEW] ./config/linux-gnu [NEW] ./config/alpha-dec [REMOVED] ./config/alpha-dec-osf4.0 [REMOVED] ./config/dec-osf4.x [NEW] ./config/irix5.3 [REMOVED] ./config/irix5.x [NEW] ./config/irix64 [REMOVED] ./config/freebsd Moved config files around to agree with output from the new config.guess. The linux file was split into gnu (RedHat), gnulibc1, and gnulibc2 versions. The alpha-dec file was removed (I think it was unused) and the alpha-dec-osf4.0 was changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and the irix64 file was renamed to irix6.x. The freebsd file was changed to point to linux-gnulibc1. These changes were tested on: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 OSF1 4.0 ./config/alphaev56-dec-osf4.x ./config/irix64 Added warnings similar to linux/freebsd about using compilers with known bugs. ./config/commence.in ./config/conclude.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Added definitions for shared libraries. This has been tested on the following systems: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 static only OSF1 4.0 If you want to disable use of shared libraries (you probably do for development purposes since it takes a lot longer to compile and because you have to run dynamically linked programs in a special way if the library hasn't been installed) then add `--disable-shared' to the configure command line. This is all documented in the INSTALL file. ./bin/release Temprarily commented out the MANIFEST checking when running under svf since svf is about to be replaced by a newer version. This change only affects error checking during the release process. ./Makefile.dist ./Makefile.in Added `make check' which does the same thing as `make _test' since the former is endorsed by the GNU coding style and people are used to it. The old `make _test' still works too (and so does `make test' if you use GNU make).
1999-03-03 01:15:35 +08:00
case $host_os in
aix*)
host_os_novers=aix
;;
freebsd*)
host_os_novers=freebsd
;;
netbsd*)
host_os_novers=netbsd
;;
solaris*)
host_os_novers=solaris
;;
*)
host_os_novers=$host_os
;;
[svn-r1112] Changes since 19990301 ---------------------- ./INSTALL Reorganized and added some additional examples. ./MANIFEST ./aclocal.m4 [NEW] ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./bin/ltconfig [NEW] ./bin/ltmain.sh [NEW] Added tests to determine how to compile shared libraries and how to link programs with them before the libraries are installed. Also how to install and uninstall shared libraries. The configure step also prints the names of the config files it's trying to load for easier debugging. ./bin/config.guess ./bin/config.sub Replaced with a newer version from GNU. The changes we made to that file to report `irix6.x' and `FreeBSD' without version numbers have been incorporated into configure.in instead. In the future, do not change these two files (see the top of configure.in instead). By the way, this update was required to get shared libraries working. ./config/linux [REMOVED] ./config/linux-gnulibc1 [NEW] ./config/linux-gnu [NEW] ./config/alpha-dec [REMOVED] ./config/alpha-dec-osf4.0 [REMOVED] ./config/dec-osf4.x [NEW] ./config/irix5.3 [REMOVED] ./config/irix5.x [NEW] ./config/irix64 [REMOVED] ./config/freebsd Moved config files around to agree with output from the new config.guess. The linux file was split into gnu (RedHat), gnulibc1, and gnulibc2 versions. The alpha-dec file was removed (I think it was unused) and the alpha-dec-osf4.0 was changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and the irix64 file was renamed to irix6.x. The freebsd file was changed to point to linux-gnulibc1. These changes were tested on: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 OSF1 4.0 ./config/alphaev56-dec-osf4.x ./config/irix64 Added warnings similar to linux/freebsd about using compilers with known bugs. ./config/commence.in ./config/conclude.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Added definitions for shared libraries. This has been tested on the following systems: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 static only OSF1 4.0 If you want to disable use of shared libraries (you probably do for development purposes since it takes a lot longer to compile and because you have to run dynamically linked programs in a special way if the library hasn't been installed) then add `--disable-shared' to the configure command line. This is all documented in the INSTALL file. ./bin/release Temprarily commented out the MANIFEST checking when running under svf since svf is about to be replaced by a newer version. This change only affects error checking during the release process. ./Makefile.dist ./Makefile.in Added `make check' which does the same thing as `make _test' since the former is endorsed by the GNU coding style and people are used to it. The old `make _test' still works too (and so does `make test' if you use GNU make).
1999-03-03 01:15:35 +08:00
esac
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
host_config="none"
for f in $host_cpu-$host_vendor-$host_os \
$host_cpu-$host_vendor-$host_os_novers \
$host_vendor-$host_os \
[svn-r1112] Changes since 19990301 ---------------------- ./INSTALL Reorganized and added some additional examples. ./MANIFEST ./aclocal.m4 [NEW] ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./bin/ltconfig [NEW] ./bin/ltmain.sh [NEW] Added tests to determine how to compile shared libraries and how to link programs with them before the libraries are installed. Also how to install and uninstall shared libraries. The configure step also prints the names of the config files it's trying to load for easier debugging. ./bin/config.guess ./bin/config.sub Replaced with a newer version from GNU. The changes we made to that file to report `irix6.x' and `FreeBSD' without version numbers have been incorporated into configure.in instead. In the future, do not change these two files (see the top of configure.in instead). By the way, this update was required to get shared libraries working. ./config/linux [REMOVED] ./config/linux-gnulibc1 [NEW] ./config/linux-gnu [NEW] ./config/alpha-dec [REMOVED] ./config/alpha-dec-osf4.0 [REMOVED] ./config/dec-osf4.x [NEW] ./config/irix5.3 [REMOVED] ./config/irix5.x [NEW] ./config/irix64 [REMOVED] ./config/freebsd Moved config files around to agree with output from the new config.guess. The linux file was split into gnu (RedHat), gnulibc1, and gnulibc2 versions. The alpha-dec file was removed (I think it was unused) and the alpha-dec-osf4.0 was changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and the irix64 file was renamed to irix6.x. The freebsd file was changed to point to linux-gnulibc1. These changes were tested on: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 OSF1 4.0 ./config/alphaev56-dec-osf4.x ./config/irix64 Added warnings similar to linux/freebsd about using compilers with known bugs. ./config/commence.in ./config/conclude.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Added definitions for shared libraries. This has been tested on the following systems: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 static only OSF1 4.0 If you want to disable use of shared libraries (you probably do for development purposes since it takes a lot longer to compile and because you have to run dynamically linked programs in a special way if the library hasn't been installed) then add `--disable-shared' to the configure command line. This is all documented in the INSTALL file. ./bin/release Temprarily commented out the MANIFEST checking when running under svf since svf is about to be replaced by a newer version. This change only affects error checking during the release process. ./Makefile.dist ./Makefile.in Added `make check' which does the same thing as `make _test' since the former is endorsed by the GNU coding style and people are used to it. The old `make _test' still works too (and so does `make test' if you use GNU make).
1999-03-03 01:15:35 +08:00
$host_vendor-$host_os_novers \
$host_cpu-$host_os \
[svn-r1112] Changes since 19990301 ---------------------- ./INSTALL Reorganized and added some additional examples. ./MANIFEST ./aclocal.m4 [NEW] ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./bin/ltconfig [NEW] ./bin/ltmain.sh [NEW] Added tests to determine how to compile shared libraries and how to link programs with them before the libraries are installed. Also how to install and uninstall shared libraries. The configure step also prints the names of the config files it's trying to load for easier debugging. ./bin/config.guess ./bin/config.sub Replaced with a newer version from GNU. The changes we made to that file to report `irix6.x' and `FreeBSD' without version numbers have been incorporated into configure.in instead. In the future, do not change these two files (see the top of configure.in instead). By the way, this update was required to get shared libraries working. ./config/linux [REMOVED] ./config/linux-gnulibc1 [NEW] ./config/linux-gnu [NEW] ./config/alpha-dec [REMOVED] ./config/alpha-dec-osf4.0 [REMOVED] ./config/dec-osf4.x [NEW] ./config/irix5.3 [REMOVED] ./config/irix5.x [NEW] ./config/irix64 [REMOVED] ./config/freebsd Moved config files around to agree with output from the new config.guess. The linux file was split into gnu (RedHat), gnulibc1, and gnulibc2 versions. The alpha-dec file was removed (I think it was unused) and the alpha-dec-osf4.0 was changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and the irix64 file was renamed to irix6.x. The freebsd file was changed to point to linux-gnulibc1. These changes were tested on: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 OSF1 4.0 ./config/alphaev56-dec-osf4.x ./config/irix64 Added warnings similar to linux/freebsd about using compilers with known bugs. ./config/commence.in ./config/conclude.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Added definitions for shared libraries. This has been tested on the following systems: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 static only OSF1 4.0 If you want to disable use of shared libraries (you probably do for development purposes since it takes a lot longer to compile and because you have to run dynamically linked programs in a special way if the library hasn't been installed) then add `--disable-shared' to the configure command line. This is all documented in the INSTALL file. ./bin/release Temprarily commented out the MANIFEST checking when running under svf since svf is about to be replaced by a newer version. This change only affects error checking during the release process. ./Makefile.dist ./Makefile.in Added `make check' which does the same thing as `make _test' since the former is endorsed by the GNU coding style and people are used to it. The old `make _test' still works too (and so does `make test' if you use GNU make).
1999-03-03 01:15:35 +08:00
$host_cpu-$host_os_novers \
$host_cpu-$host_vendor \
$host_os \
$host_os_novers \
$host_vendor \
$host_cpu ; do
AC_MSG_CHECKING([for config $f])
if test -f "$srcdir/config/$f"; then
host_config=$srcdir/config/$f
AC_MSG_RESULT([found])
break
fi
AC_MSG_RESULT([no])
done
if test "X$host_config" != "Xnone"; then
CC_BASENAME="`echo $CC | cut -f1 -d' ' | xargs basename 2>/dev/null`"
. $host_config
fi
## Source any special site-specific file
hname="`hostname`"
while test -n "$hname"; do
file=$srcdir/config/site-specific/host-$hname
AC_MSG_CHECKING([for config $file])
if test -f "$file"; then
. $file
AC_MSG_RESULT([found])
break
fi
AC_MSG_RESULT([no])
hname_tmp=$hname
hname="`echo $hname | cut -d. -f2-99`"
test "$hname_tmp" = "$hname" && break
done
## ----------------------------------------------------------------------
## Determine build mode (debug, production, clean).
## This has to be done early since the build mode is referred to
## frequently.
##
AC_MSG_CHECKING([build mode])
AC_ARG_ENABLE([build-mode],
[AS_HELP_STRING([--enable-build-mode=(debug|production|clean)],
[Sets the build mode. Debug turns on symbols, API
tracing, asserts, and debug optimization,
as well as several other minor configure options
that aid in debugging.
Production turns high optimizations on.
Clean turns nothing on and disables optimization
(i.e.: a 'clean slate' configuration).
All these settings can be overridden by using
specific configure flags.
[default=debug]
])],
[BUILD_MODE=$enableval])
## Set the default
## Depends on branch, set via script at branch creation time
if test "X-$BUILD_MODE" = X- ; then
BUILD_MODE=debug
fi
## Allow this variable to be substituted in
## other files (src/libhdf5.settings.in, etc.)
AC_SUBST([BUILD_MODE])
case "X-$BUILD_MODE" in
X-clean)
AC_MSG_RESULT([clean])
;;
X-debug)
AC_DEFINE([DEBUG_BUILD], [1], [Define if this is a debug build.])
H5_CFLAGS="$H5_CFLAGS $DEBUG_CFLAGS"
H5_CPPFLAGS="$H5_CPPFLAGS $DEBUG_CPPFLAGS"
H5_CXXFLAGS="$H5_CXXFLAGS $DEBUG_CXXFLAGS"
H5_FCFLAGS="$H5_FCFLAGS $DEBUG_FCFLAGS"
AC_MSG_RESULT([debug])
;;
X-production)
H5_CFLAGS="$H5_CFLAGS $PROD_CFLAGS"
H5_CPPFLAGS="$H5_CPPFLAGS $PROD_CPPFLAGS"
H5_CXXFLAGS="$H5_CXXFLAGS $PROD_CXXFLAGS"
H5_FCFLAGS="$H5_FCFLAGS $PROD_FCFLAGS"
AC_MSG_RESULT([production])
;;
*)
AC_MSG_ERROR([Unrecognized build mode: $BUILD_MODE. Use debug, production, or clean.])
esac
## ----------------------------------------------------------------------
## Some built-in configure checks can only see CFLAGS (not AM_CFLAGS), so
## we need to add this in so configure works as intended. We will need to
## reset this value at the end of configure, to preserve the user's settings.
CFLAGS="${AM_CFLAGS} ${CFLAGS}"
FCFLAGS="${AM_FCFLAGS} ${FCFLAGS}"
JAVACFLAGS="${AM_JAVACFLAGS} ${JAVACFLAGS}"
JAVAFLAGS="${AM_JAVAFLAGS} ${JAVAFLAGS}"
CXXFLAGS="${AM_CXXFLAGS} ${CXXFLAGS}"
CPPFLAGS="${AM_CPPFLAGS} ${CPPFLAGS}"
LDFLAGS="${AM_LDFLAGS} ${LDFLAGS}"
## ----------------------------------------------------------------------
## Enable dependency tracking unless the configure options or a
## site-specific file told us not to. This prevents configure from
## silently disabling dependencies for some compilers.
##
if test -z "${enable_dependency_tracking}"; then
enable_dependency_tracking="yes"
fi
## ----------------------------------------------------------------------
## Check for programs.
##
AC_PROG_CC
CC_BASENAME="`echo $CC | cut -f1 -d' ' | xargs basename 2>/dev/null`"
## ----------------------------------------------------------------------------
## Configure disallows unsupported combinations of options. However, users
## may want to override and build with unsupported combinations for their
## own use. They can use the --enable-unsupported configure flag, which
## ignores any errors from configure due to incompatible flags.
AC_MSG_CHECKING([if unsupported combinations of configure options are allowed])
AC_ARG_ENABLE([unsupported],
[AS_HELP_STRING([--enable-unsupported],
[Allow unsupported combinations of configure options])],
[ALLOW_UNSUPPORTED=$enableval])
case "X-$ALLOW_UNSUPPORTED" in
X-|X-no)
AC_MSG_RESULT([no])
;;
X-yes)
AC_MSG_RESULT([yes])
;;
*)
;;
esac
## ----------------------------------------------------------------------
## Data types and their sizes.
##
AC_TYPE_OFF_T
AC_CHECK_TYPE([size_t], [],
[AC_DEFINE_UNQUOTED([size_t], [unsigned long],
[Define to `unsigned long' if <sys/types.h> does not define.])])
AC_CHECK_TYPE([ssize_t], [],
[AC_DEFINE_UNQUOTED([ssize_t], [long],
[Define to `long' if <sys/types.h> does not define.])])
AC_CHECK_TYPE([ptrdiff_t], [],
[AC_DEFINE_UNQUOTED([ptrdiff_t], [long],
[Define to `long' if <sys/types.h> does not define.])])
AC_C_BIGENDIAN
AC_CHECK_SIZEOF([char])
AC_CHECK_SIZEOF([short])
AC_CHECK_SIZEOF([int])
AC_CHECK_SIZEOF([unsigned])
AC_CHECK_SIZEOF([long])
AC_CHECK_SIZEOF([long long])
AC_CHECK_SIZEOF([__int64])
AC_CHECK_SIZEOF([float])
AC_CHECK_SIZEOF([double])
AC_CHECK_SIZEOF([long double])
## ----------------------------------------------------------------------
## Check for non-standard extension __FLOAT128
##
HAVE_FLOAT128=0
HAVE_QUADMATH=0
FLT128_DIG=0
LDBL_DIG=0
AC_CHECK_SIZEOF([__float128])
AC_CHECK_SIZEOF([_Quad])
AC_CHECK_HEADERS([quadmath.h], [HAVE_QUADMATH=1], [])
PAC_FC_LDBL_DIG
AC_SUBST([PAC_C_MAX_REAL_PRECISION])
if test "$ac_cv_sizeof___float128" != 0 && test "$FLT128_DIG" != 0 ; then
AC_DEFINE([HAVE_FLOAT128], [1], [Determine if __float128 is available])
PAC_C_MAX_REAL_PRECISION=$FLT128_DIG
else
PAC_C_MAX_REAL_PRECISION=$LDBL_DIG
fi
AC_DEFINE_UNQUOTED([PAC_C_MAX_REAL_PRECISION], $PAC_C_MAX_REAL_PRECISION, [Determine the maximum decimal precision in C])
AC_MSG_RESULT([$PAC_C_MAX_REAL_PRECISION])
## ----------------------------------------------------------------------
## Check if they would like the Fortran interface compiled
##
## This needs to be exposed for the library info file even if Fortran is disabled.
AC_SUBST([HDF_FORTRAN])
## Default is no Fortran
HDF_FORTRAN=no
AC_SUBST([HDF5_INTERFACES]) HDF5_INTERFACES=""
AC_MSG_CHECKING([if Fortran interface enabled])
AC_ARG_ENABLE([fortran],
[AS_HELP_STRING([--enable-fortran],
[Compile the Fortran interface [default=no]])],
[HDF_FORTRAN=$enableval])
if test "X$HDF_FORTRAN" = "Xyes"; then
echo "yes"
else
echo "no"
fi
if test "X$HDF_FORTRAN" = "Xyes"; then
## We will output an include file for Fortran, H5config_f.inc which
## contains various configure definitions used by the Fortran Library.
## Prepend H5_ to all macro names. This avoids name conflict between HDF5 macro
## names and those generated by another software package that uses the HDF5 library.
AC_CONFIG_HEADERS([fortran/src/H5config_f.inc],
[cat fortran/src/H5config_f.inc | sed '1d;s%^/\* \(.*\) \*/%\1%;s/#define /#define H5_/;s/#undef /#undef H5_/' >fortran/src/H5config_f.inc.tmp; mv -f fortran/src/H5config_f.inc.tmp fortran/src/H5config_f.inc])
AC_SUBST([FC])
HDF5_INTERFACES="$HDF5_INTERFACES fortran"
## --------------------------------------------------------------------
## HDF5 integer variables for the H5fortran_types.f90 file.
##
AC_SUBST([R_LARGE])
AC_SUBST([R_INTEGER])
AC_SUBST([HADDR_T])
AC_SUBST([HSIZE_T])
AC_SUBST([HSSIZE_T])
AC_SUBST([HID_T])
AC_SUBST([SIZE_T])
AC_SUBST([OBJECT_NAMELEN_DEFAULT_F])
## --------------------------------------------------------------------
## Fortran source extention
##
AC_FC_SRCEXT([f90])
AC_SUBST([F9XSUFFIXFLAG])
AC_SUBST([FSEARCH_DIRS])
## --------------------------------------------------------------------
## Check for a Fortran compiler and how to include modules.
##
AC_PROG_FC([PAC_FC_SEARCH_LIST],)
AC_F9X_MODS
## Change to the Fortran 90 language
AC_LANG_PUSH(Fortran)
## Checking if the compiler supports the required Fortran 2003 features and
## stopping if it does not.
PAC_PROG_FC_HAVE_F2003_REQUIREMENTS
if test "X$HAVE_F2003_REQUIREMENTS" = "Xno"; then
AC_MSG_ERROR([Fortran compiler lacks required Fortran 2003 features; unsupported Fortran 2003 compiler, remove --enable-fortran])
fi
## --------------------------------------------------------------------
## Define wrappers for the C compiler to use Fortran function names
##
AC_FC_WRAPPERS
## --------------------------------------------------------------------
## See if the fortran compiler supports the intrinsic function "SIZEOF"
PAC_PROG_FC_SIZEOF
## See if the fortran compiler supports the intrinsic function "C_SIZEOF"
PAC_PROG_FC_C_SIZEOF
## See if the fortran compiler supports the intrinsic function "STORAGE_SIZE"
PAC_PROG_FC_STORAGE_SIZE
## Set the sizeof function for use later in the fortran tests
if test "X$HAVE_STORAGE_SIZE_FORTRAN" = "Xyes";then
FC_SIZEOF_A="STORAGE_SIZE(a, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)"
FC_SIZEOF_B="STORAGE_SIZE(b, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)"
FC_SIZEOF_C="STORAGE_SIZE(c, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)"
else
if test "X$HAVE_SIZEOF_FORTRAN" = "Xyes";then
FC_SIZEOF_A="SIZEOF(a)"
FC_SIZEOF_B="SIZEOF(b)"
FC_SIZEOF_C="SIZEOF(c)"
else
## If neither intrinsic functions SIZEOF or STORAGE_SIZE is available then stop configure with an error
AC_MSG_ERROR([Fortran compiler requires either intrinsic functions SIZEOF or STORAGE_SIZE])
fi
fi
## See if the fortran compiler supports the intrinsic module "ISO_FORTRAN_ENV"
PAC_PROG_FC_ISO_FORTRAN_ENV
## Check KIND and size of native integer
PAC_FC_NATIVE_INTEGER
## Find all available KINDs
PAC_FC_AVAIL_KINDS
## Find all sizeofs for available KINDs
PAC_FC_SIZEOF_INT_KINDS
PAC_FC_SIZEOF_REAL_KINDS
AC_SUBST([PAC_FC_ALL_REAL_KINDS])
AC_SUBST([PAC_FC_MAX_REAL_PRECISION])
AC_SUBST([PAC_FORTRAN_NUM_INTEGER_KINDS])
AC_SUBST([PAC_FC_ALL_INTEGER_KINDS])
AC_SUBST([PAC_FC_ALL_REAL_KINDS_SIZEOF])
AC_SUBST([PAC_FC_ALL_INTEGER_KINDS_SIZEOF])
AC_SUBST([PAC_FORTRAN_NATIVE_INTEGER_KIND])
AC_SUBST([PAC_FORTRAN_NATIVE_INTEGER_SIZEOF])
AC_SUBST([PAC_FORTRAN_NATIVE_REAL_KIND])
AC_SUBST([PAC_FORTRAN_NATIVE_REAL_SIZEOF])
AC_SUBST([PAC_FORTRAN_NATIVE_DOUBLE_KIND])
AC_SUBST([PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF])
AC_SUBST([HAVE_Fortran_INTEGER_SIZEOF_16])
AC_SUBST([FORTRAN_HAVE_C_LONG_DOUBLE])
AC_SUBST([FORTRAN_C_LONG_DOUBLE_IS_UNIQUE])
AC_SUBST([H5CONFIG_F_NUM_RKIND])
AC_SUBST([H5CONFIG_F_RKIND])
AC_SUBST([H5CONFIG_F_RKIND_SIZEOF])
AC_SUBST([H5CONFIG_F_NUM_IKIND])
AC_SUBST([H5CONFIG_F_IKIND])
AC_SUBST([Fortran_COMPILER_ID])
Fortran_COMPILER_ID=none
AC_DEFINE_UNQUOTED([Fortran_COMPILER_ID], $Fortran_COMPILER_ID, [Define Fortran compiler ID])
## Setting definition if there is a 16 byte fortran integer
if `echo $PAC_FC_ALL_INTEGER_KINDS_SIZEOF | grep '16' >/dev/null`; then
HAVE_Fortran_INTEGER_SIZEOF_16="1"
AC_DEFINE([HAVE_Fortran_INTEGER_SIZEOF_16], [1], [Determine if INTEGER*16 is available])
else
HAVE_Fortran_INTEGER_SIZEOF_16="0"
AC_DEFINE([HAVE_Fortran_INTEGER_SIZEOF_16], [0], [Determine if INTEGER*16 is available])
fi
2015-06-10 01:05:09 +08:00
if test "X$HAVE_STORAGE_SIZE_FORTRAN" = "Xyes"; then
AC_DEFINE([FORTRAN_HAVE_STORAGE_SIZE], [1], [Define if we have Fortran intrinsic STORAGE_SIZE])
fi
2015-06-10 01:05:09 +08:00
if test "X$HAVE_C_SIZEOF_FORTRAN" = "Xyes"; then
AC_DEFINE([FORTRAN_HAVE_C_SIZEOF], [1], [Define if we have Fortran intrinsic C_SIZEOF])
fi
if test "X$HAVE_SIZEOF_FORTRAN" = "Xyes"; then
AC_DEFINE([FORTRAN_HAVE_SIZEOF], [1], [Define if we have Fortran intrinsic SIZEOF])
fi
## See if C_LONG_DOUBLE is available
PAC_PROG_FC_HAVE_C_LONG_DOUBLE
FORTRAN_HAVE_C_LONG_DOUBLE="0"
if test "X$HAVE_C_LONG_DOUBLE_FORTRAN" = "Xyes"; then
FORTRAN_HAVE_C_LONG_DOUBLE="1"
AC_DEFINE([FORTRAN_HAVE_C_LONG_DOUBLE], [1], [Define if we have Fortran C_LONG_DOUBLE])
fi
## Is C_LONG_DOUBLE different from C_DOUBLE
FORTRAN_C_LONG_DOUBLE_IS_UNIQUE="0"
if test "$FORTRAN_HAVE_C_LONG_DOUBLE" = "1"; then
PAC_PROG_FC_C_LONG_DOUBLE_EQ_C_DOUBLE
if test "X$C_LONG_DOUBLE_IS_UNIQUE_FORTRAN" = "Xyes"; then
FORTRAN_C_LONG_DOUBLE_IS_UNIQUE="1"
AC_DEFINE([FORTRAN_C_LONG_DOUBLE_IS_UNIQUE], [1], [Define if Fortran C_LONG_DOUBLE is different from C_DOUBLE])
else
FORTRAN_C_LONG_DOUBLE_IS_UNIQUE="0"
fi
fi
FORTRAN_SIZEOF_LONG_DOUBLE=${ac_cv_sizeof_long_double}
AC_DEFINE_UNQUOTED([FORTRAN_SIZEOF_LONG_DOUBLE], ["${ac_cv_sizeof_long_double}"], [Determine the size of C long double])
dnl get the largest sizeof for REAL kinds
max_real_fortran_sizeof="`echo $PAC_FC_ALL_REAL_KINDS_SIZEOF | sed -ne 's/.*,\([[0-9]]*\)}/\1/p'`"
max_real_fortran_kind="`echo $PAC_FC_ALL_REAL_KINDS | sed -ne 's/.*,\([[0-9]]*\)}/\1/p'`"
dnl remove the invalid kind from the list
if test "$ac_cv_sizeof___float128" != 0;then
if test "$ac_cv_sizeof___float128" != "$max_real_fortran_sizeof" &&
test "${ac_cv_sizeof_long_double}" != "$max_real_fortran_sizeof" &&
dnl account for the fact that the C compiler can have 16-byte __float128 and the Fortran compiler only has 8-byte doubles,
dnl so we don't want to remove the 8-byte Fortran doubles. This is sometimes the case if different C and Fortran vendors
dnl are used (for example gnu and pgi).
test "${ac_cv_sizeof_double}" != "$max_real_fortran_sizeof" ; then
AC_MSG_WARN([
Fortran REAL(KIND=$max_real_fortran_kind) is $max_real_fortran_sizeof Bytes, but no corresponding C float type exists of that size
!!! Fortran interfaces will not be generated for REAL(KIND=$max_real_fortran_kind) !!!
])
PAC_FC_ALL_REAL_KINDS="`echo $PAC_FC_ALL_REAL_KINDS | sed -e 's/,[[0-9]]\+}/}/g'`"
PAC_FC_ALL_REAL_KINDS_SIZEOF="`echo $PAC_FC_ALL_REAL_KINDS_SIZEOF | sed -e 's/,[[0-9]]\+}/}/g'`"
fi
fi
AC_MSG_CHECKING([for Fortran interoperable KINDS with C])
AC_MSG_RESULT([$PAC_FC_ALL_REAL_KINDS])
dnl count the number of real kinds
H5CONFIG_F_NUM_RKIND="INTEGER, PARAMETER :: num_rkinds = `echo \"[$]PAC_FC_ALL_REAL_KINDS\" | tr -d -c ',\n' | awk '{ print length + 1; }'`"
H5CONFIG_F_RKIND="INTEGER, DIMENSION(1:num_rkinds) :: rkind = (/`echo $PAC_FC_ALL_REAL_KINDS | sed -e 's/{//g' | sed -e 's/}//g' | sed -e 's/ /,/g'`/)"
H5CONFIG_F_RKIND_SIZEOF="INTEGER, DIMENSION(1:num_rkinds) :: rkind_sizeof = (/`echo $PAC_FC_ALL_REAL_KINDS_SIZEOF | sed -e 's/{//g' | sed -e 's/}//g'| sed -e 's/ /,/g'`/)"
AC_DEFINE_UNQUOTED([H5CONFIG_F_NUM_RKIND], $H5CONFIG_F_NUM_RKIND, [Define number of valid Fortran REAL KINDs])
AC_DEFINE_UNQUOTED([H5CONFIG_F_RKIND], $H5CONFIG_F_RKIND, [Define valid Fortran REAL KINDs])
AC_DEFINE_UNQUOTED([H5CONFIG_F_RKIND_SIZEOF], $H5CONFIG_F_RKIND_SIZEOF, [Define valid Fortran REAL KINDs Sizeof])
## Change back to the C language
AC_LANG_POP(Fortran)
else
FC="no"
fi
## ----------------------------------------------------------------------
## Check if they would like the C++ interface compiled
##
## This needs to be exposed for the library info file even if C++ is disabled.
AC_SUBST([HDF_CXX])
## Default is no C++
HDF_CXX=no
## We need to check for a C++ compiler unconditionally, since
## AC_PROG_CXX defines some macros that Automake 1.9.x uses and will
## miss even if c++ is not enabled.
AC_PROG_CXX
AC_PROG_CXXCPP ## this is checked for when AC_HEADER_STDC is done
AC_MSG_CHECKING([if c++ interface enabled])
AC_ARG_ENABLE([cxx],
[AS_HELP_STRING([--enable-cxx],
[Compile the C++ interface [default=no]])],
[HDF_CXX=$enableval])
if test "X$HDF_CXX" = "Xyes"; then
echo "yes"
HDF5_INTERFACES="$HDF5_INTERFACES c++"
## Expose the compiler for *.in files
AC_SUBST([CXX])
## Change to the C++ language
AC_LANG_PUSH(C++)
## Checking if C++ needs old style header files in includes
PAC_PROG_CXX_HEADERS
## Checking if C++ can handle namespaces
PAC_PROG_CXX_NAMESPACE
## if C++ can handle static cast
PAC_PROG_CXX_STATIC_CAST
## Checking if C++ has offsetof extension,
## note: this test has to be the last of the C++ tests because it sets a definition
## which would be used in the other tests, causing them to fail.
PAC_PROG_CXX_OFFSETOF
else
AC_MSG_RESULT([no])
CXX="no"
fi
## Change back to the C language
AC_LANG_POP(C++)
## ----------------------------------------------------------------------
## Check if they would like the High Level library compiled
##
## This needs to be exposed for the library info file even if the HL
## library is disabled.
AC_SUBST([HDF5_HL])
## The high-level library is enabled unless the build mode is clean.
if test "X-$BUILD_MODE" = "X-clean" ; then
HDF5_HL=no
else
HDF5_HL=yes
fi
## high-level library directories (set when needed, blank until then)
##
## main high-level library
AC_SUBST(HL)
HL=""
## Fortran high-level library
AC_SUBST(HL_FOR)
HL_FOR=""
AC_MSG_CHECKING([if the high-level library is enabled])
AC_ARG_ENABLE([hl],
[AS_HELP_STRING([--enable-hl],
[Enable the high-level library.
[default=yes (unless build mode = clean)]
])],
[HDF5_HL=$enableval])
if test "X-$HDF5_HL" = "X-yes"; then
AC_MSG_RESULT([yes])
HL="hl"
AC_DEFINE([INCLUDE_HL], [1],
[Define if the high-level library headers should be included in hdf5.h])
else
AC_MSG_RESULT([no])
fi
## ----------------------------------------------------------------------
## Check which archiving tool to use. This needs to be done before
## the AM_PROG_LIBTOOL macro.
##
if test -z "$AR"; then
AC_CHECK_PROGS([AR], [ar xar], [:], [$PATH])
fi
AC_SUBST([AR])
# Set the default ar flags to cr
# The Automake default is to use cru and the 'u' causes ar
# to emit warnings on some platforms.
AR_FLAGS=cr
## Export the AR macro so that it will be placed in the libtool file
## correctly.
export AR
AC_PROG_MAKE_SET
AC_PROG_INSTALL
## ----------------------------------------------------------------------
## Set up ${TR} which is used to process the package list for extra
## debugging output in the C library.
AC_PATH_PROG([TR], [tr])
## ----------------------------------------------------------------------
## Check that time can be used with srcdir. This is okay on most systems,
## but seems to cause problems on Cygwin.
## The solution on Cygwin is not to record execution time for tests.
##
## Note: This is still true as of Cygwin 1.7.32 (Aug 2014) on both 32-
## and 64-bit platforms. Given how long this has been true, it seems
## unlikely to change, but we should probably re-test this periodically.
AC_MSG_CHECKING([if srcdir= and time commands work together])
AC_SUBST([TIME])
TIME=time
TIME_TEST=`foo="bar" ${TIME} echo 'baz' 2> /dev/null | grep baz`
if test "X${TIME_TEST}" = "Xbaz"; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
TIME=
fi
## The following variables are used to distinguish between building a
## serial and parallel library.
##
## HAVE_PARALLEL -- defined in H5config.h if we are building
## a parallel library even if configure wasn't
## able to find some header file or library that
## might be required. This is defined if the
## user explicitly states
## that a parallel library is being built by supplying
## the `--enable-parallel' configure switch.
##
## PARALLEL -- This variable is set to a non-null value if
## we're building a parallel version of the library.
##
## RUNSERIAL -- This is a command which will be prepended to
## the executable name to run the executable using
## a single process. For serial versions of the
## library this will normally be empty. For parallel
## versions it might be something like `mpiexec -n 1'.
## The value of this variable is substituted in *.in
## files.
##
## RUNPARALLEL -- This is a command which will be prepended to
## the executable name to run the executable on
## multiple processors. For the serial library the
## value will normally be the empty string. For
## parallel library it should be something like
## "mpiexec -n \$\${NPROCS:=6}" where NPROCS will
## eventually contain the number of processors on which
## to run the executable (the double dollarsigns are to
## protect the expansion until make executes the
## command). The value of this variable is
## substituted in *.in files.
##
AC_SUBST([PARALLEL])
AC_SUBST([RUNSERIAL])
AC_SUBST([RUNPARALLEL])
AC_SUBST([TESTPARALLEL])
## ----------------------------------------------------------------------
## Check if they would like the Java native interface (JNI) compiled
##
## This needs to be exposed for the library info file even if Java is disabled.
AC_SUBST([HDF_JAVA])
## Default is no Java
HDF_JAVA=no
AC_SUBST([H5_CLASSPATH]) H5_CLASSPATH=""
AC_MSG_CHECKING([if Java JNI interface enabled])
AC_ARG_ENABLE([java],
[AS_HELP_STRING([--enable-java],
[Compile the Java JNI interface [default=no]])],
[HDF_JAVA=$enableval])
2016-03-01 23:04:39 +08:00
if test "X$HDF_JAVA" = "Xyes"; then
if test "X${enable_shared}" != "Xno"; then
echo "yes"
if test "X$CLASSPATH" = "X"; then
H5_CLASSPATH=".:$srcdir/java/lib"
else
H5_CLASSPATH=".:$CLASSPATH:$srcdir/java/lib"
fi
## Checks for programs.
AX_JAVA_OPTIONS
H5_JAVACFLAGS=$JAVACFLAGS
H5_JAVAFLAGS=$JAVAFLAGS
AX_PROG_JAVAC
AX_PROG_JAVA
AX_PROG_JAR
AX_PROG_JAVADOC
## Find the include directories needed for building JNI code
AX_JNI_INCLUDE_DIR()
for JNI_INCLUDE_DIR in $JNI_INCLUDE_DIRS
do
JNIFLAGS="$JNIFLAGS -I$JNI_INCLUDE_DIR"
done
## Find junit for testing the JNI code
AX_CHECK_CLASSPATH()
CLASSPATH_ENV=$H5_CLASSPATH
AX_CHECK_JUNIT()
AX_CHECK_JAVA_HOME
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([Java requires shared libraries to be built])
HDF_JAVA="no"
AC_MSG_RESULT([no])
fi
else
AC_MSG_RESULT([no])
fi
## ----------------------------------------------------------------------
## Fortran libraries are not currently supported on Mac. Disable them.
## (this is overridable with --enable-unsupported).
##
AC_SUBST([H5_FORTRAN_SHARED])
H5_FORTRAN_SHARED="no"
if test "X${HDF_FORTRAN}" = "Xyes" && test "X${enable_shared}" != "Xno"; then
AC_MSG_CHECKING([if shared Fortran libraries are supported])
H5_FORTRAN_SHARED="yes"
2017-09-21 03:38:00 +08:00
## tell libtool to do the right thing with COMMON symbols, this fixes
## corrupt values with COMMON and EQUIVALENCE when building shared
## Fortran libraries on OSX with gnu and Intel compilers (HDFFV-2772).
case "`uname`" in
Darwin*)
H5_LDFLAGS="$H5_LDFLAGS -Wl,-commons,use_dylibs"
;;
esac
## Report results of check(s)
if test "X${H5_FORTRAN_SHARED}" = "Xno"; then
AC_MSG_RESULT([no])
AC_MSG_WARN([$CHECK_WARN])
if test "X${ALLOW_UNSUPPORTED}" != "Xyes"; then
AC_MSG_WARN([Disabling shared Fortran libraries.])
AC_MSG_WARN([To override this behavior, please use --enable-unsupported configure option.])
if test "X${enable_static}" = "Xno"; then
AC_MSG_ERROR([both static and shared Fortran libraries are disabled])
fi
else
AC_MSG_WARN([Allowing unsupported Fortran shared libraries due to use of --enable-unsupported flag])
H5_FORTRAN_SHARED="yes"
fi
else
AC_MSG_RESULT([yes])
fi
fi
AM_CONDITIONAL([FORTRAN_SHARED_CONDITIONAL], [test "X$H5_FORTRAN_SHARED" = "Xyes"])
## ----------------------------------------------------------------------
## Check if they would like to disable building tests
##
## This needs to be exposed for the library info file.
AC_SUBST([HDF5_TESTS])
## Default is to build tests
HDF5_TESTS=yes
AC_MSG_CHECKING([if building tests is disabled])
AC_ARG_ENABLE([tests],
[AS_HELP_STRING([--enable-tests],
[Compile the HDF5 tests [default=yes]])],
[HDF5_TESTS=$enableval])
if test "X$HDF5_TESTS" = "Xno"; then
echo "Building HDF5 tests is disabled"
fi
## ----------------------------------------------------------------------
## Check if they would like to disable building tools
##
## This needs to be exposed for the library info file.
AC_SUBST([HDF5_TOOLS])
## Default is to build tests and tools
HDF5_TOOLS=yes
AC_MSG_CHECKING([if building tools is disabled])
AC_ARG_ENABLE([tools],
[AS_HELP_STRING([--enable-tools],
[Compile the HDF5 tools [default=yes]])],
[HDF5_TOOLS=$enableval])
if test "X$HDF5_TOOLS" = "Xno"; then
echo "Building HDF5 tools is disabled"
fi
## ----------------------------------------------------------------------
## Create libtool. If shared/static libraries are going to be enabled
## or disabled, it should happen before these macros.
LT_PREREQ([2.2])
## ----------------------------------------------------------------------
## dlopen - This will use an improved version of libtool
## win32-dll - This will build clean dlls on win32 platforms.
LT_INIT([dlopen,win32-dll])
## ----------------------------------------------------------------------
## Check if we should install only statically linked executables.
## This check needs to occur after libtool is initialized because
## we check a libtool cache value and may issue a warning based
## on its result.
AC_SUBST([STATIC_EXEC])
## Default is no
STATIC_EXEC=no
AC_MSG_CHECKING([if we should install only statically linked executables])
AC_ARG_ENABLE([static_exec],
[AS_HELP_STRING([--enable-static-exec],
[Install only statically linked executables
[default=no]])],
[STATIC_EXEC=$enableval])
if test "X$STATIC_EXEC" = "Xyes"; then
echo "yes"
## Issue a warning if -static flag is not supported.
if test "X$lt_cv_prog_compiler_static_works" = "Xno"; then
echo " warning: -static flag not supported on this system; executable won't statically link shared system libraries."
LT_STATIC_EXEC=""
else
LT_STATIC_EXEC="-all-static"
fi
else
echo "no"
LT_STATIC_EXEC=""
fi
AM_CONDITIONAL([USE_PLUGINS_CONDITIONAL], [test "X$LT_STATIC_EXEC" = X])
AC_SUBST([LT_STATIC_EXEC])
## Fix up the INSTALL macro if it's a relative path. We want the
## full-path to the binary instead.
case "$INSTALL" in
*install-sh*)
INSTALL='\${top_srcdir}/bin/install-sh -c'
;;
esac
## ----------------------------------------------------------------------
## Some users have reported problems with libtool's use of '-Wl,-rpath' to
## link shared libraries in nondefault directories. Allow users to
## disable embedding the rpath information in the executables and to
## instead solely rely on the information in LD_LIBRARY_PATH.
AC_MSG_CHECKING([if -Wl,-rpath should be used to link shared libs in nondefault directories])
AC_ARG_ENABLE([sharedlib-rpath],
[AS_HELP_STRING([--disable-sharedlib-rpath],
[Disable use of the '=Wl,-rpath' linker option])],
[RPATH=$enableval])
case "X-$RPATH" in
X-no)
AC_MSG_RESULT([no])
runpath_var=
hardcode_libdir_flag_spec=
hardcode_libdir_flag_spec_ld=
hardcode_into_libs=no
;;
X-|X-yes)
AC_MSG_RESULT([yes])
;;
*)
AC_MSG_RESULT([error])
AC_MSG_ERROR([\'$enableval\' is not a valid rpath type])
;;
esac
[svn-r1802] Changes since 19991019 ---------------------- ./MANIFEST ./configure.in ./configure [REGENERATED] Added more checking for `make' features. ./Makefile.in ./doc/Makefile.in ./doc/html/Makefile.in ./doc/html/Tutor/Makefile.in ./examples/Makefile.in ./pablo/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./config/commence.in ./config/conclude.in ./config/depend.in [REMOVED] ./config/depend1.in [NEW] ./config/depend2.in [NEW] ./config/depend3.in [NEW] ./config/depend4.in [NEW] ./config/dependN.in [NEW] The directory search stuff was moved into commence.in, thereby shortening the Makefile.in prologues. ./doc/html/Dependencies [NEW] ./doc/html/Tutor/Dependencies [NEW] ./examples/Dependencies [NEW] ./src/Dependencies [NEW] ./test/Dependencies [NEW] ./testpar/Dependencies [NEW] ./tools/Dependencies [NEW] The `.distdep' files were all renamed to `Dependencies' to make them more obvious. They are required (but may be empty) in every directory that has a Makefile.in that ends with @CONCLUDE@ (you'll get an obvious error from make if you forgot to create one). ./bin/trace ./src/H5.c Added H5E_major_t and H5E_minor_t although tracing only prints the integer value. ./src/H5E.c ./src/H5Epublic.h Added tracing information. ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDgass.c ./src/H5FDmpio.c ./src/H5FDsec2.c ./src/H5FDstdio.c Fixed places where FUNC_LEAVE() evaluated it's argument more than once. Added tracing information. Wrapped long lines. ./config/gnu-flags Fixed a syntax error when we don't have a gnu compiler.
1999-11-01 23:21:16 +08:00
## ----------------------------------------------------------------------
## Check for system libraries. "dl" stands for dynamically loaded library
##
AC_CHECK_LIB([m], [ceil])
AC_CHECK_LIB([dl], [dlopen])
## ----------------------------------------------------------------------
## Check for system header files.
##
AC_HEADER_STDC
[svn-r859] Changes since 19981030 ---------------------- ./MANIFEST Added new Pablo files HDF5record_RT.h and ProcIDs.h ./acconfig.h ./configure [REGENERATED] ./configure.in ./src/H5.c ./src/H5Vprivate.h ./src/H5config.h.in [REGENERATED] ./src/H5private.h ./src/H5public.h ./test/big.c Added more configuration stuff for the Win32 environment. Removed all the #ifdef WIN32 from the source and replaced them with OS-independent stuff. Specifics follow: Check for non-Posix.1 `st_blocks' field in `struct stat' which is used by the big file test to decide if the file system supports holes. If the st_blocks field isn't present then we just skip the test. Configure checks for <io.h> <sys/resource.h> <sys/time.h> and <winsock.h> and defines HAVE_IO_H, HAVE_SYS_RESOURCE_H, HAVE_SYS_TIME_H and HAVE_WINSOCK_H when they're found. Configure checks whether both <sys/time.h> and <time.h> can be included and defines SYS_TIME_WITH_TIME if so. Otherwise include only <sys/time.h> or <time.h> even if both exist. Configure checks sizeof(__int64) and defines SIZEOF___INT64 to the result or to zero if __int64 isn't defined. The source uses `long long' in preference to `__int64'. Removed null WIN32 definition for `inline' since such a definition already exists in H5config.h Protected gettimeofday() calls in debugging code with HAVE_GETTIMEOFDAY instead of WIN32. ./src/H5F.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fstdio.h ./src/H5P.c ./src/H5Tconv.c ./src/H5private.h Removed #include of system files from library source files and consolodated them into H5private.h where they're protected by various configuration macros (most of them were duplicated there already anyway). ./test/big.c ./test/chunk.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c ./test/fillval.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/links.c ./test/mount.c ./test/mtime.c ./test/overhead.c ./test/ragged.c ./test/shtype.c ./test/unlink.c Protected system #include's with #ifdef's from H5config.h. Undefined NDEBUG since some of the tests rely on assert() to check return values. Removed WIN32 definitions for __unused__ since this can be controlled by the definition of HAVE_ATTRIBUTE in H5config.h ./test/testhdf5.h Removed the CLEAN_CMD definition because we no longer use it. Albert's cleanup() functions replaced it. ./test/fillval.c Initialized auto hid_t variables to fix warnings in error recovery code when data flow analysis is turned on in compilers. ./test/h5tools.c Initialized an auto variable to fix a compiler warning. ./test/chunk.c ./test/ragged.c The WIN32 had some unsigned variables changed to signed because the compiler generates warnings when coercing unsigned to double(?). I changed them back to unsigned because they really are unsigned quantities. If this the change was just to shut up extraneous warnings then perhaps a compiler flag can do the same; otherwise if the compiler generates bad code then we should supply a patch file instead messing up source code with bug work-arounds. ./src/H5detect.c Protected system #include's with #ifdef's from H5config.h thereby removing a WIN32. If getpwuid() doesn't exist (HAVE_GETPWUID) then we assume that `struct passwd' doesn't exist either (we don't really need it in that case). The H5T_NATIVE_LLONG and H5T_NATIVE_ULLONG are defined in terms of `long long' or else `__int64' or else `long' depending on what's available. ./src/H5Flow.c ./src/H5Ofill.c Added __unused__ to some function arguments that aren't used when assertions are turned off. ./src/H5V.c Changed an auto variable name in some hand-inlined code to get rid of a warning about the variable shadowing a previous auto.
1998-11-03 01:58:28 +08:00
AC_HEADER_TIME
## Unix
AC_CHECK_HEADERS([sys/resource.h sys/time.h unistd.h sys/ioctl.h sys/stat.h])
AC_CHECK_HEADERS([sys/socket.h sys/types.h sys/file.h])
AC_CHECK_HEADERS([stddef.h setjmp.h features.h])
AC_CHECK_HEADERS([dirent.h])
AC_CHECK_HEADERS([stdint.h], [C9x=yes])
AC_CHECK_HEADERS([stdbool.h])
## Darwin
AC_CHECK_HEADERS([mach/mach_time.h])
## Also need to detect Darwin for pubconf
case $host_os in
darwin*)
AC_DEFINE([HAVE_DARWIN], [1], [Define if Darwin or Mac OS X])
;;
esac
## Windows
case "`uname`" in
CYGWIN*)
AC_CHECK_HEADERS([io.h sys/timeb.h])
UNAME_CYGWIN="yes"
;;
MINGW*)
AC_CHECK_HEADERS([io.h winsock2.h sys/timeb.h])
AC_HAVE_LIBRARY([ws2_32])
;;
*)
AC_CHECK_HEADERS([io.h winsock2.h sys/timeb.h])
;;
esac
## ----------------------------------------------------------------------
## Some platforms require that all symbols are resolved when a library
## is linked. We can use the -no-undefined flag to tell libtool that
## it will be able to build shared libraries on these architectures,
## as it will not do so by default.
##
if test "X${enable_shared}" = "Xyes"; then
AC_MSG_CHECKING([if libtool needs -no-undefined flag to build shared libraries])
case "`uname`" in
CYGWIN*|MINGW*|AIX*)
## Add in the -no-undefined flag to LDFLAGS for libtool.
AC_MSG_RESULT([yes])
H5_LDFLAGS="$H5_LDFLAGS -no-undefined"
;;
*)
## Don't add in anything.
AC_MSG_RESULT([no])
;;
esac
fi
## ----------------------------------------------------------------------
## Use the macro _AC_SYS_LARGEFILE_MACRO_VALUE to test defines
## that might need to be set for largefile support to behave
## correctly. This macro is defined in acsite.m4 and overrides
## the version provided by Autoconf (as of v2.65). The custom
## macro additionally adds the appropriate defines to AM_CPPFLAGS
## so that later configure checks have them visible.
## Check for _FILE_OFFSET_BITS
_AC_SYS_LARGEFILE_MACRO_VALUE([_FILE_OFFSET_BITS], [64],
[ac_cv_sys_file_offset_bits],
[Number of bits in a file offset, on hosts where this is settable.],
[_AC_SYS_LARGEFILE_TEST_INCLUDES])
## Check for _LARGE_FILES
if test "$ac_cv_sys_file_offset_bits" = unknown; then
_AC_SYS_LARGEFILE_MACRO_VALUE([_LARGE_FILES], [1],
[ac_cv_sys_large_files],
[Define for large files, on AIX-style hosts.],
[_AC_SYS_LARGEFILE_TEST_INCLUDES])
fi
## ----------------------------------------------------------------------
## Add necessary defines for Linux Systems.
##
case "$host_cpu-$host_vendor-$host_os" in
*linux*)
## Add POSIX support on Linux systems, so <features.h> defines
## __USE_POSIX, which is required to get the prototype for fdopen
## defined correctly in <stdio.h>.
##
## This flag was removed from h5cc as of 2009-10-17 when it was found
## that the flag broke compiling netCDF-4 code with h5cc, but kept in
## H5_CPPFLAGS because fdopen and HDfdopen fail without it. HDfdopen
## is used only by H5_debug_mask which is used only when debugging in
## H5_init_library (all in H5.c). When the flag was removed this was
## the only compile failure noted.
##
## This was originally defined as _POSIX_SOURCE which was updated to
## _POSIX_C_SOURCE=199506L to expose a greater amount of POSIX
## functionality so clock_gettime and CLOCK_MONOTONIC are defined
## correctly. This was later updated to 200112L so that
## posix_memalign() is visible for the direct VFD code on Linux
## systems. Even later, this was changed to 200809L to support
## pread/pwrite in VFDs.
##
## POSIX feature information can be found in the gcc manual at:
## http://www.gnu.org/s/libc/manual/html_node/Feature-Test-Macros.html
H5_CPPFLAGS="-D_POSIX_C_SOURCE=200809L $H5_CPPFLAGS"
## Need to add this so that O_DIRECT is visible for the direct
## VFD on Linux systems.
H5_CPPFLAGS="-D_GNU_SOURCE $H5_CPPFLAGS"
;;
esac
## Need to add the AM_ and H5_ into CFLAGS/CPPFLAGS to make them visible
## for configure checks.
## Note: Both will be restored by the end of configure.
CPPFLAGS="$H5_CPPFLAGS $AM_CPPFLAGS $CPPFLAGS"
CFLAGS="$H5_CFLAGS $AM_CFLAGS $CFLAGS"
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
## Checkpoint the cache
AC_CACHE_SAVE
## Posix.1g types (C9x)
[svn-r925] Changes since 19981116 ---------------------- ./INSTALL.parallel [NEW] We're beginning to unify some of the parallel installation steps. This file will contain general information for installing the parallel library. It's not complete yet. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Check for xdr_int() in libnsl required on Solaris when linking with hdf4. It's found on the Irix system I tested which complains that `-lnsl' didn't resolve any symbols. Oh well. Fixed the order of searching for libdf and libmfhdf for hdf4 linking. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5Z.c Check for compress() in libz in order to find older versions of the library that will still work for hdf4. Added a separate check for compress2() that hdf5 will use. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5.c ./src/H5private.h ./src/H5A.c ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5R.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Sselect.c ./src/H5T.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5V.c ./test/bittests.c ./test/gheap.c ./test/hyperslab.c ./test/istore.c ./test/tmeta.c ./test/trefer.c ./test/tselect.c ./tools/h5debug.c ./tools/h5tols.c Added checks for Posix.1g types like `int8_t'. If not defined then H5private.h defines them. Changed all `int8' etc. to `int8_t'. ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5I.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5T.c ./src/H5TB.c ./src/H5Z.c Calling H5*_term_interface() resets interface_initialize_g to FALSE so a subsequent call to H5open() (implied or explicit) reinitializes global variables properly. ./src/H5private.h ./src/H5Oefl.c ./src/H5S.c Changed MAX_SIZET, MAX_SSIZET, MAX_HSIZET, and MAX_HSSIZET to SIZET_MAX, SSIZET_MAX, HSIZET_MAX, and HSSIZE_MAX to they match the Posix.1 constants in <limits.h>. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5detect.c Added 36 more integer hardware conversion functions to the type conversion table for conversions to/from `long long' and `unsigned long long'. The `long long' names will be changed shortly to make them portable to Win32. Changed H5T_init() to H5T_native_open() and added an H5T_native_close() to open and close the predefined native data types. Increased the initial size of the type conversion table from 64 to 128 entries. Reordered the 90 new integer conversion functions so the names that are printed favor `int' over `short' or `long' when two of them are the same. ./test/dtypes.c Added hardware and software integer conversion tests for the 56 functions I added recently but not the additional 36 checked in this time. That will come next. Call H5close() after each test so type conversion statistics are easier to follow. Try this: $ HDF5_DEBUG=t ./dtypes Added more debugging output for when things go wrong. ./src/H5private.h Removed trailing carriage-returns inserted by broken operating system ;-)
1998-11-19 02:40:09 +08:00
cat >>confdefs.h <<\EOF
#include <sys/types.h>
EOF
if test "X$C9x" = "Xyes"; then
cat >>confdefs.h <<\EOF
#include <stdint.h>
EOF
fi
AC_CHECK_SIZEOF( [int8_t])
AC_CHECK_SIZEOF( [uint8_t])
AC_CHECK_SIZEOF( [int_least8_t])
AC_CHECK_SIZEOF( [uint_least8_t])
AC_CHECK_SIZEOF( [int_fast8_t])
AC_CHECK_SIZEOF( [uint_fast8_t])
AC_CHECK_SIZEOF( [int16_t])
AC_CHECK_SIZEOF( [uint16_t])
AC_CHECK_SIZEOF( [int_least16_t])
AC_CHECK_SIZEOF([uint_least16_t])
AC_CHECK_SIZEOF( [int_fast16_t])
AC_CHECK_SIZEOF( [uint_fast16_t])
AC_CHECK_SIZEOF( [int32_t])
AC_CHECK_SIZEOF( [uint32_t])
AC_CHECK_SIZEOF( [int_least32_t])
AC_CHECK_SIZEOF([uint_least32_t])
AC_CHECK_SIZEOF( [int_fast32_t])
AC_CHECK_SIZEOF( [uint_fast32_t])
AC_CHECK_SIZEOF( [int64_t])
AC_CHECK_SIZEOF( [uint64_t])
AC_CHECK_SIZEOF( [int_least64_t])
AC_CHECK_SIZEOF([uint_least64_t])
AC_CHECK_SIZEOF( [int_fast64_t])
AC_CHECK_SIZEOF( [uint_fast64_t])
AC_CHECK_SIZEOF([size_t])
AC_CHECK_SIZEOF([ssize_t])
AC_CHECK_SIZEOF([ptrdiff_t])
cat >>confdefs.h <<\EOF
#include <sys/types.h> /*for off_t definition*/
EOF
AC_CHECK_SIZEOF([off_t])
if test "X$C9x" = "Xyes"; then
cat >>confdefs.h <<\EOF
#ifdef HAVE_STDBOOL_H
#include <stdbool.h> /* for bool definition */
#else
#define bool _Bool
#endif
EOF
AC_CHECK_SIZEOF([bool])
fi
AC_CHECK_SIZEOF(time_t, [], [
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_TIME_H
#include <time.h>
#endif
])
## Checkpoint the cache
AC_CACHE_SAVE
## ----------------------------------------------------------------------
## Check if the dev_t type is a scalar type (must come after the check for
## sys/types.h)
AC_MSG_CHECKING([if dev_t is scalar])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
]],
[[dev_t d1, d2; if(d1==d2) return 0;]])],
[AC_DEFINE([DEV_T_IS_SCALAR], [1],
[Define if dev_t is a scalar])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])])
## ----------------------------------------------------------------------
## Fake --with-xxx option to allow us to create a help message for the
## following --with-xxx options which can take either a =DIR or =INC,LIB
## specifier.
##
AC_ARG_WITH([fnord],
[
For the following --with-xxx options, you can specify where the header
files and libraries are in two different ways:
--with-xxx=INC,LIB - Specify individually the include directory and
library directory separated by a comma
--with-xxx=DIR - Specify only the directory which contains the
include/ and lib/ subdirectories
])
## ----------------------------------------------------------------------
## Is dmalloc (debug malloc library) requested? It has a header file
## `dmalloc.h' and a library `-ldmalloc' and their locations might be
## specified with the `--with-dmalloc' command-line switch. The value
## is an include path and/or a library path. If the library path is
## specified then it must be preceded by a comma.
##
AC_SUBST([HAVE_DMALLOC])
## Default is not present
HAVE_DMALLOC=no
AC_ARG_WITH([dmalloc],
[AS_HELP_STRING([--with-dmalloc=DIR],
[Use dmalloc memory debugging aid [default=no]])],,
[withval=no])
2018-09-20 23:15:12 +08:00
case "X-$withval" in
X-yes)
HAVE_DMALLOC="yes"
AC_CHECK_HEADERS([dmalloc.h],, [unset HAVE_DMALLOC])
if test "x$HAVE_DMALLOC" = "xyes"; then
AC_CHECK_LIB([dmalloc], [dmalloc_shutdown],, [unset HAVE_DMALLOC])
fi
if test -z "$HAVE_DMALLOC" -a -n "$HDF5_CONFIG_ABORT"; then
AC_MSG_ERROR([couldn't find dmalloc library])
fi
;;
2018-09-20 23:15:12 +08:00
X-|X-no|X-none)
HAVE_DMALLOC="no"
AC_MSG_CHECKING([for dmalloc library])
AC_MSG_RESULT([suppressed])
;;
*)
HAVE_DMALLOC="yes"
case "$withval" in
*,*)
dmalloc_inc="`echo $withval |cut -f1 -d,`"
dmalloc_lib="`echo $withval |cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
dmalloc_inc="$withval/include"
dmalloc_lib="$withval/lib"
fi
;;
esac
saved_CPPFLAGS="$CPPFLAGS"
saved_AM_CPPFLAGS="$AM_CPPFLAGS"
saved_LDFLAGS="$LDFLAGS"
saved_AM_LDFLAGS="$AM_LDFLAGS"
if test -n "$dmalloc_inc"; then
CPPFLAGS="$CPPFLAGS -I$dmalloc_inc"
AM_CPPFLAGS="$AM_CPPFLAGS -I$dmalloc_inc"
fi
AC_CHECK_HEADERS([dmalloc.h],,[CPPFLAGS="$saved_CPPFLAGS"; AM_CPPFLAGS="$saved_AM_CPPFLAGS"] [unset HAVE_DMALLOC])
if test "x$HAVE_DMALLOC" = "xyes"; then
if test -n "$dmalloc_lib"; then
LDFLAGS="$LDFLAGS -L$dmalloc_lib"
AM_LDFLAGS="$AM_LDFLAGS -L$dmalloc_lib"
fi
AC_CHECK_LIB([dmalloc], [dmalloc_shutdown],, [LDFLAGS="$saved_LDFLAGS"; AM_LDFLAGS="$saved_AM_LDFLAGS"; unset HAVE_DMALLOC])
fi
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
if test -z "$HAVE_DMALLOC" -a -n "$HDF5_CONFIG_ABORT"; then
AC_MSG_ERROR([couldn't find dmalloc library])
fi
;;
esac
## ----------------------------------------------------------------------
## Make the external filters list available to *.in files
## At this point it's unset (no external filters by default) but it
## will be filled in during the deflate (zlib) and szip processing
## below.
##
AC_SUBST([EXTERNAL_FILTERS])
## ----------------------------------------------------------------------
## Is the GNU zlib present? It has a header file `zlib.h' and a library
## `-lz' and their locations might be specified with the `--with-zlib'
## command-line switch. The value is an include path and/or a library path.
## If the library path is specified then it must be preceded by a comma.
##
AC_SUBST([USE_FILTER_DEFLATE]) USE_FILTER_DEFLATE="no"
AC_ARG_WITH([zlib],
[AS_HELP_STRING([--with-zlib=DIR],
[Use zlib library for external deflate I/O
filter [default=yes]])],,
[withval=yes])
2018-09-20 23:15:12 +08:00
case "X-$withval" in
X-yes)
HAVE_ZLIB="yes"
AC_CHECK_HEADERS([zlib.h], [HAVE_ZLIB_H="yes"], [unset HAVE_ZLIB])
if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes"; then
AC_CHECK_LIB([z], [compress2],, [unset HAVE_ZLIB])
fi
if test -z "$HAVE_ZLIB"; then
if test -n "$HDF5_CONFIG_ABORT"; then
AC_MSG_ERROR([couldn't find zlib library])
fi
else
AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"])
fi
;;
2018-09-20 23:15:12 +08:00
X-|X-no|X-none)
HAVE_ZLIB="no"
AC_MSG_CHECKING([for zlib])
AC_MSG_RESULT([suppressed])
;;
*)
HAVE_ZLIB="yes"
case "$withval" in
*,*)
zlib_inc="`echo $withval | cut -f1 -d,`"
zlib_lib="`echo $withval | cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
zlib_inc="$withval/include"
zlib_lib="$withval/lib"
fi
;;
esac
saved_CPPFLAGS="$CPPFLAGS"
saved_AM_CPPFLAGS="$AM_CPPFLAGS"
saved_LDFLAGS="$LDFLAGS"
saved_AM_LDFLAGS="$AM_LDFLAGS"
if test -n "$zlib_inc"; then
CPPFLAGS="$CPPFLAGS -I$zlib_inc"
AM_CPPFLAGS="$AM_CPPFLAGS -I$zlib_inc"
fi
AC_CHECK_HEADERS([zlib.h],
[HAVE_ZLIB_H="yes"],
[CPPFLAGS="$saved_CPPFLAGS"; AM_CPPFLAGS="$saved_AM_CPPFLAGS"] [unset HAVE_ZLIB])
if test -n "$zlib_lib"; then
LDFLAGS="$LDFLAGS -L$zlib_lib"
AM_LDFLAGS="$AM_LDFLAGS -L$zlib_lib"
fi
if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes"; then
AC_CHECK_LIB([z], [compress2],,
[LDFLAGS="$saved_LDFLAGS"; AM_LDFLAGS="$saved_AM_LDFLAGS"; unset HAVE_ZLIB])
fi
if test -z "$HAVE_ZLIB"; then
if test -n "$HDF5_CONFIG_ABORT"; then
AC_MSG_ERROR([couldn't find zlib library])
fi
else
AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"])
fi
;;
esac
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes" -a "x$HAVE_COMPRESS2" = "xyes"; then
AC_DEFINE([HAVE_FILTER_DEFLATE], [1], [Define if support for deflate (zlib) filter is enabled])
USE_FILTER_DEFLATE="yes"
## Add "deflate" to external filter list
if test "X$EXTERNAL_FILTERS" != "X"; then
EXTERNAL_FILTERS="${EXTERNAL_FILTERS},"
fi
EXTERNAL_FILTERS="${EXTERNAL_FILTERS}deflate(zlib)"
fi
## ----------------------------------------------------------------------
## Is the szlib present? It has a header file `szlib.h' and a library
## `-lsz' and their locations might be specified with the `--with-szlib'
## command-line switch. The value is an include path and/or a library path.
## If the library path is specified then it must be preceded by a comma.
##
AC_SUBST([USE_FILTER_SZIP]) USE_FILTER_SZIP="no"
AC_ARG_WITH([szlib],
[AS_HELP_STRING([--with-szlib=DIR],
[Use szlib library for external szlib I/O
filter [default=no]])],,
[withval=no])
2018-09-20 23:15:12 +08:00
case "X-$withval" in
X-yes)
HAVE_SZLIB="yes"
AC_CHECK_HEADERS([szlib.h], [HAVE_SZLIB_H="yes"], [unset HAVE_SZLIB])
if test "x$HAVE_SZLIB" = "xyes" -a "x$HAVE_SZLIB_H" = "xyes"; then
AC_CHECK_LIB([sz], [SZ_BufftoBuffCompress],, [unset HAVE_SZLIB])
fi
if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
AC_MSG_ERROR([couldn't find szlib library])
fi
;;
2018-09-20 23:15:12 +08:00
X-|X-no|X-none)
HAVE_SZLIB="no"
AC_MSG_CHECKING([for szlib])
AC_MSG_RESULT([suppressed])
;;
*)
HAVE_SZLIB="yes"
case "$withval" in
*,*)
szlib_inc="`echo $withval |cut -f1 -d,`"
szlib_lib="`echo $withval |cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
szlib_inc="$withval/include"
szlib_lib="$withval/lib"
fi
;;
esac
saved_CPPFLAGS="$CPPFLAGS"
saved_AM_CPPFLAGS="$AM_CPPFLAGS"
saved_LDFLAGS="$LDFLAGS"
saved_AM_LDFLAGS="$AM_LDFLAGS"
if test -n "$szlib_inc"; then
CPPFLAGS="$CPPFLAGS -I$szlib_inc"
AM_CPPFLAGS="$AM_CPPFLAGS -I$szlib_inc"
fi
AC_CHECK_HEADERS([szlib.h],
[HAVE_SZLIB_H="yes"],
[CPPFLAGS="$saved_CPPFLAGS"; AM_CPPFLAGS="$saved_AM_CPPFLAGS"] [unset HAVE_SZLIB])
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
if test -n "$szlib_lib"; then
LDFLAGS="$LDFLAGS -L$szlib_lib"
AM_LDFLAGS="$AM_LDFLAGS -L$szlib_lib"
fi
if test "x$HAVE_SZLIB" = "xyes" -a "x$HAVE_SZLIB_H" = "xyes"; then
AC_CHECK_LIB([sz], [SZ_BufftoBuffCompress],,
[LDFLAGS="$saved_LDFLAGS"; AM_LDFLAGS="$saved_AM_LDFLAGS"; unset HAVE_SZLIB])
fi
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
AC_MSG_ERROR([couldn't find szlib library])
fi
;;
esac
if test "x$HAVE_SZLIB" = "xyes" -a "x$HAVE_SZLIB_H" = "xyes"; then
## SZLIB library is available. Check if it can encode
AC_MSG_CHECKING([for szlib encoder])
## Set LD_LIBRARY_PATH so encoder test can find the library and run.
## Also add LL_PATH substitution to Makefiles so they can use the
## path as well, for testing examples.
if test -z "$LD_LIBRARY_PATH"; then
export LD_LIBRARY_PATH="$szlib_lib"
else
export LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$szlib_lib"
fi
AC_SUBST([LL_PATH]) LL_PATH="$LD_LIBRARY_PATH"
AC_CACHE_VAL([hdf5_cv_szlib_can_encode],
[AC_RUN_IFELSE(
[AC_LANG_PROGRAM([
#include "szlib.h"
],[[
/* SZ_encoder_enabled returns 1 if encoder is present */
if(SZ_encoder_enabled() == 1)
exit(0);
else
exit(1);
]])]
, [hdf5_cv_szlib_can_encode=yes], [hdf5_cv_szlib_can_encode=no],)]
)
AC_DEFINE([HAVE_FILTER_SZIP], [1],
[Define if support for szip filter is enabled])
USE_FILTER_SZIP="yes"
if test ${hdf5_cv_szlib_can_encode} = "yes"; then
AC_MSG_RESULT([yes])
fi
if test ${hdf5_cv_szlib_can_encode} = "no"; then
AC_MSG_RESULT([no])
fi
## Add "szip" to external filter list
if test ${hdf5_cv_szlib_can_encode} = "yes"; then
if test "X$EXTERNAL_FILTERS" != "X"; then
EXTERNAL_FILTERS="${EXTERNAL_FILTERS},"
fi
EXTERNAL_FILTERS="${EXTERNAL_FILTERS}szip(encoder)"
fi
if test ${hdf5_cv_szlib_can_encode} = "no"; then
if test "X$EXTERNAL_FILTERS" != "X"; then
EXTERNAL_FILTERS="${EXTERNAL_FILTERS},"
fi
EXTERNAL_FILTERS="${EXTERNAL_FILTERS}szip(no encoder)"
fi
fi
AM_CONDITIONAL([BUILD_SHARED_SZIP_CONDITIONAL], [test "X$USE_FILTER_SZIP" = "Xyes" && test "X$LL_PATH" != "X"])
## Checkpoint the cache
AC_CACHE_SAVE
## ----------------------------------------------------------------------
## Enable thread-safe version of library. It requires Pthreads support
## on POSIX systems.
##
AC_SUBST([THREADSAFE])
## Default is no thread-safety
THREADSAFE=no
AC_MSG_CHECKING([for thread safe support])
AC_ARG_ENABLE([threadsafe],
[AS_HELP_STRING([--enable-threadsafe],
[Enable thread-safe capability. Not compatible with the high-level library, Fortran, or C++ wrappers.
[default=no]])],
[THREADSAFE=$enableval])
## The high-level, C++, Fortran and Java interfaces are not compatible
## with the thread-safety option because the lock is not hoisted
## into the higher-level API calls.
## --enable-threadsafe is incompatible with --enable-hl unless
## --enable-unsupported has been specified on the configure line.
##
## Note that the high-level library is enabled by default so most
## users will have to add --disable-hl to the configure options.
if test "X${ALLOW_UNSUPPORTED}" != "Xyes"; then
if test "X${HDF5_HL}" = "Xyes" -a "X${enable_threadsafe}" = "Xyes"; then
AC_MSG_ERROR([The thread-safe library is incompatible with the high-level library. --disable-hl can be used to prevent building the high-level library (recommended). Alternatively, --enable-unsupported will allow building the high-level library, though this configuration is not supported by The HDF Group.])
fi
fi
## The --enable-threadsafe flag is not compatible with --enable-cxx.
## If the user tried to specify both flags, throw an error, unless
## they also provided the --enable-unsupported flag.
if test "X${ALLOW_UNSUPPORTED}" != "Xyes"; then
if test "X${HDF_CXX}" = "Xyes" -a "X${enable_threadsafe}" = "Xyes"; then
AC_MSG_ERROR([--enable-cxx and --enable-threadsafe flags are incompatible. Use --enable-unsupported to override this error.])
fi
fi
## --enable-threadsafe is also incompatible with --enable-fortran unless
## --enable-unsupported has been specified on the configure line.
if test "X${ALLOW_UNSUPPORTED}" != "Xyes"; then
if test "X${HDF_FORTRAN}" = "Xyes" -a "X${enable_threadsafe}" = "Xyes"; then
AC_MSG_ERROR([--enable-fortran and --enable-threadsafe flags are incompatible. Use --enable-unsupported to override this error.])
fi
fi
## --enable-threadsafe is also incompatible with --enable-java unless
## --enable-unsupported has been specified on the configure line.
if test "X${ALLOW_UNSUPPORTED}" != "Xyes"; then
if test "X${HDF_JAVA}" = "Xyes" -a "X${enable_threadsafe}" = "Xyes"; then
AC_MSG_ERROR([--enable-java and --enable-threadsafe flags are incompatible. Use --enable-unsupported to override this error.])
fi
fi
case "X-$THREADSAFE" in
X-|X-no)
AC_MSG_RESULT([no])
;;
X-yes)
THREADSAFE=yes
AC_MSG_RESULT([yes])
;;
*)
AC_MSG_RESULT([error])
AC_MSG_ERROR([\'$enableval\' is not a valid threadsafe type])
;;
esac
if test "X$THREADSAFE" = "Xyes"; then
AC_DEFINE([HAVE_THREADSAFE], [1], [Define if we have thread safe support])
## ----------------------------------------------------------------------
## Is the Pthreads library present? It has a header file `pthread.h' and
## a library `-lpthread' and their locations might be specified with the
## `--with-pthread' command-line switch. The value is an include path
## and/or a library path. If the library path is specified then it must
## be preceded by a comma.
##
## Thread-safety in HDF5 only uses Pthreads via configure, so the
## default is "check", though this only has an effect when
## --enable-threadsafe is specified.
AC_SUBST([HAVE_PTHREAD]) HAVE_PTHREAD=yes
AC_ARG_WITH([pthread],
[AS_HELP_STRING([--with-pthread=DIR],
[Specify alternative path to Pthreads library when
thread-safe capability is built.])],,
[withval=check])
case "$withval" in
check | yes)
AC_CHECK_HEADERS([pthread.h],, [unset HAVE_PTHREAD])
if test "x$HAVE_PTHREAD" = "xyes"; then
AC_CHECK_LIB([pthread], [pthread_self],, [unset HAVE_PTHREAD])
fi
;;
no)
AC_MSG_ERROR([Must use Pthreads with thread safety])
;;
*)
case "$withval" in
*,*)
pthread_inc="`echo $withval | cut -f1 -d,`"
pthread_lib="`echo $withval | cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
pthread_inc="$withval/include"
pthread_lib="$withval/lib"
fi
;;
esac
if test -n "$pthread_inc"; then
saved_CPPFLAGS="$CPPFLAGS"
saved_AM_CPPFLAGS="$AM_CPPFLAGS"
CPPFLAGS="$CPPFLAGS -I$pthread_inc"
AM_CPPFLAGS="$AM_CPPFLAGS -I$pthread_inc"
AC_CHECK_HEADERS([pthread.h],, [CPPFLAGS="$saved_CPPFLAGS"; AM_CPPFLAGS="$saved_AM_CPPFLAGS"; unset HAVE_PTHREAD])
else
AC_CHECK_HEADERS([pthread.h],, [unset HAVE_PTHREAD])
fi
if test "x$HAVE_PTHREAD" = "xyes"; then
if test -n "$pthread_lib"; then
saved_LDFLAGS="$LDFLAGS"
saved_AM_LDFLAGS="$AM_LDFLAGS"
LDFLAGS="$LDFLAGS -L$pthread_lib"
AM_LDFLAGS="$AM_LDFLAGS -L$pthread_lib"
AC_CHECK_LIB([pthread], [pthread_self],,
[LDFLAGS="$saved_LDFLAGS"; AM_LDFLAGS="$saved_AM_LDFLAGS"; unset HAVE_PTHREAD])
else
AC_CHECK_LIB([pthread], [pthread_self],, [unset HAVE_PTHREAD])
fi
fi
;;
esac
## ----------------------------------------------------------------------
## Check if pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM)
## is supported on this system
##
## Unfortunately, this probably needs to be an AC_RUN_IFELSE since
## it's impossible to determine if PTHREAD_SCOPE_SYSTEM is
## supported a priori. POSIX.1-2001 requires that a conformant
## system need only support one of SYSTEM or PROCESS scopes.
##
## For cross-compiling, we've added a pessimistic 'no'. You can
## hand-hack the config file if you know otherwise.
AC_MSG_CHECKING([Pthreads supports system scope])
AC_CACHE_VAL([hdf5_cv_system_scope_threads],
[AC_RUN_IFELSE(
[AC_LANG_PROGRAM([
#if STDC_HEADERS
#include <stdlib.h>
#include <pthread.h>
#endif
],[
pthread_attr_t attribute;
int ret;
pthread_attr_init(&attribute);
ret=pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM);
exit(ret==0 ? 0 : 1);
])]
, [hdf5_cv_system_scope_threads=yes], [hdf5_cv_system_scope_threads=no], [hdf5_cv_system_scope_threads=no])])
if test ${hdf5_cv_system_scope_threads} = "yes"; then
AC_DEFINE([SYSTEM_SCOPE_THREADS], [1],
[Define if your system supports pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM) call.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
AC_MSG_NOTICE([Always 'no' if cross-compiling. Edit the config file if your platform supports pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM).])
fi
fi
## ----------------------------------------------------------------------
## Check for MONOTONIC_TIMER support (used in clock_gettime). This has
## to be done after any POSIX defines to ensure that the test gets
## the correct POSIX level on linux.
AC_CHECK_DECL([CLOCK_MONOTONIC],[have_clock_monotonic="yes"],[have_clock_monotonic="no"],[[#include <time.h>]])
## ----------------------------------------------------------------------
## How does one figure out the local time zone? Anyone know of a
## Posix way to do this?
##
[svn-r546] Changes since 19980724 ---------------------- ./MANIFEST ./doc/html/H5.format.html ./src/H5O.c ./src/H5Oprivate.h ./src/H5Omtime.c [NEW] ./src/H5private.h ./src/Makefile.in Added the modification time message. If an object header has this message then it's value is updated with the current time whenever anything changes in the object header. ./acconfig.h ./configure.in Alas, there seems to be no standard way to convert a string time like 19980727122800 in UTC to a time_t since mktime() only converts local times to time_t. So I've modified the configuration to check for various ways of getting the time zone information: * Added checks for the `tm_gmtoff' field of `struct tm'. * Added a check for the `timezone' global variable. * Added a check for `struct timezone'. * Added a check for BSDgettimeofday(). * Added a check for gettimeofday() although it doesn't actually set the timezone argument on some systems. * Added a check to see if `tm_zone' is a member of `struct tm'. * Added a check to see if `tzname' is a global variable. * Added a check to see if `struct tm' is defined in time.h or sys/time.h. It's not difficult to get the right UTC modification message into the object header, but some systems might have problems getting the right time back out (Irix64 is one) and those systems will report zero for the H5G_stat_t.mtime from an H5Gstat() call as if the mtime message isn't even present. It will, however, continue to be updated as normal. ./src/H5G.c ./src/H5Gpublic.h The H5G_stat_t struct now contains an `mtime' field which will hold the object modification time. If the object has no object modification time then the `mtime' will be initialized to zero. Fixed a bug in H5G_stat() that caused the `objno' field of the H5G_stat_t to be set incorrectly on some machines. ./src/H5D.c Writing to external datasets fail if the hdf5 file is not open for writing. A modification time message is added to the dataset object header when it's created and H5O_touch() is called from H5D_write() to update that message. ./src/H5T.c Fixed a bug in H5Tget_member_dims() that caused a segmentation fault if one of the output array arguments was the null pointer. Relaxed the member dimension checking in H5Tinsert_array() so it can also be used for scalar members. ./test/Makefile.in Added additional file names to the `mostlyclean' target. ./tools/h5dump.c ./tools/h5tools.h Increased the temporary buffer size to 1MB. Added support for printing compound data types with array members. When printing H5T_NATIVE_CHAR and H5T_NATIVE_UCHAR we escape double quote characters. ./tools/h5ls.c Changed the output format a little because we were starting to get too much info to fit on a line. Without `--verbose' each object occupies one line of output. Otherwise, additional information is printed below the object name: object file address, comment, and modification time. If `--dump' is given then the data is printed after the other information. ./test/cmpd_dset.c Changed the way the dataset is initialized to be more uniform.
1998-07-30 00:43:59 +08:00
## First check if `struct tm' has a `tm_gmtoff' member.
AC_MSG_CHECKING([for tm_gmtoff in struct tm])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <sys/time.h>
#include <time.h>
]], [[struct tm tm; tm.tm_gmtoff=0;]])],
[AC_DEFINE([HAVE_TM_GMTOFF], [1],
[Define if tm_gmtoff is a member of struct tm])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])])
[svn-r546] Changes since 19980724 ---------------------- ./MANIFEST ./doc/html/H5.format.html ./src/H5O.c ./src/H5Oprivate.h ./src/H5Omtime.c [NEW] ./src/H5private.h ./src/Makefile.in Added the modification time message. If an object header has this message then it's value is updated with the current time whenever anything changes in the object header. ./acconfig.h ./configure.in Alas, there seems to be no standard way to convert a string time like 19980727122800 in UTC to a time_t since mktime() only converts local times to time_t. So I've modified the configuration to check for various ways of getting the time zone information: * Added checks for the `tm_gmtoff' field of `struct tm'. * Added a check for the `timezone' global variable. * Added a check for `struct timezone'. * Added a check for BSDgettimeofday(). * Added a check for gettimeofday() although it doesn't actually set the timezone argument on some systems. * Added a check to see if `tm_zone' is a member of `struct tm'. * Added a check to see if `tzname' is a global variable. * Added a check to see if `struct tm' is defined in time.h or sys/time.h. It's not difficult to get the right UTC modification message into the object header, but some systems might have problems getting the right time back out (Irix64 is one) and those systems will report zero for the H5G_stat_t.mtime from an H5Gstat() call as if the mtime message isn't even present. It will, however, continue to be updated as normal. ./src/H5G.c ./src/H5Gpublic.h The H5G_stat_t struct now contains an `mtime' field which will hold the object modification time. If the object has no object modification time then the `mtime' will be initialized to zero. Fixed a bug in H5G_stat() that caused the `objno' field of the H5G_stat_t to be set incorrectly on some machines. ./src/H5D.c Writing to external datasets fail if the hdf5 file is not open for writing. A modification time message is added to the dataset object header when it's created and H5O_touch() is called from H5D_write() to update that message. ./src/H5T.c Fixed a bug in H5Tget_member_dims() that caused a segmentation fault if one of the output array arguments was the null pointer. Relaxed the member dimension checking in H5Tinsert_array() so it can also be used for scalar members. ./test/Makefile.in Added additional file names to the `mostlyclean' target. ./tools/h5dump.c ./tools/h5tools.h Increased the temporary buffer size to 1MB. Added support for printing compound data types with array members. When printing H5T_NATIVE_CHAR and H5T_NATIVE_UCHAR we escape double quote characters. ./tools/h5ls.c Changed the output format a little because we were starting to get too much info to fit on a line. Without `--verbose' each object occupies one line of output. Otherwise, additional information is printed below the object name: object file address, comment, and modification time. If `--dump' is given then the data is printed after the other information. ./test/cmpd_dset.c Changed the way the dataset is initialized to be more uniform.
1998-07-30 00:43:59 +08:00
## Check whether the global variable `timezone' is defined.
AC_MSG_CHECKING([for global timezone variable])
case "`uname`" in
CYGWIN*)
AC_MSG_RESULT([disabled in CYGWIN])
;;
*)
AC_LINK_IFELSE([AC_LANG_PROGRAM([[
#include <sys/time.h>
#include <time.h>]], [[timezone=0;]])],
[AC_DEFINE([HAVE_TIMEZONE], [1],
[Define if timezone is a global variable])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])])
;;
esac
[svn-r546] Changes since 19980724 ---------------------- ./MANIFEST ./doc/html/H5.format.html ./src/H5O.c ./src/H5Oprivate.h ./src/H5Omtime.c [NEW] ./src/H5private.h ./src/Makefile.in Added the modification time message. If an object header has this message then it's value is updated with the current time whenever anything changes in the object header. ./acconfig.h ./configure.in Alas, there seems to be no standard way to convert a string time like 19980727122800 in UTC to a time_t since mktime() only converts local times to time_t. So I've modified the configuration to check for various ways of getting the time zone information: * Added checks for the `tm_gmtoff' field of `struct tm'. * Added a check for the `timezone' global variable. * Added a check for `struct timezone'. * Added a check for BSDgettimeofday(). * Added a check for gettimeofday() although it doesn't actually set the timezone argument on some systems. * Added a check to see if `tm_zone' is a member of `struct tm'. * Added a check to see if `tzname' is a global variable. * Added a check to see if `struct tm' is defined in time.h or sys/time.h. It's not difficult to get the right UTC modification message into the object header, but some systems might have problems getting the right time back out (Irix64 is one) and those systems will report zero for the H5G_stat_t.mtime from an H5Gstat() call as if the mtime message isn't even present. It will, however, continue to be updated as normal. ./src/H5G.c ./src/H5Gpublic.h The H5G_stat_t struct now contains an `mtime' field which will hold the object modification time. If the object has no object modification time then the `mtime' will be initialized to zero. Fixed a bug in H5G_stat() that caused the `objno' field of the H5G_stat_t to be set incorrectly on some machines. ./src/H5D.c Writing to external datasets fail if the hdf5 file is not open for writing. A modification time message is added to the dataset object header when it's created and H5O_touch() is called from H5D_write() to update that message. ./src/H5T.c Fixed a bug in H5Tget_member_dims() that caused a segmentation fault if one of the output array arguments was the null pointer. Relaxed the member dimension checking in H5Tinsert_array() so it can also be used for scalar members. ./test/Makefile.in Added additional file names to the `mostlyclean' target. ./tools/h5dump.c ./tools/h5tools.h Increased the temporary buffer size to 1MB. Added support for printing compound data types with array members. When printing H5T_NATIVE_CHAR and H5T_NATIVE_UCHAR we escape double quote characters. ./tools/h5ls.c Changed the output format a little because we were starting to get too much info to fit on a line. Without `--verbose' each object occupies one line of output. Otherwise, additional information is printed below the object name: object file address, comment, and modification time. If `--dump' is given then the data is printed after the other information. ./test/cmpd_dset.c Changed the way the dataset is initialized to be more uniform.
1998-07-30 00:43:59 +08:00
## ----------------------------------------------------------------------
## Does the struct stat have the st_blocks field? This field is not Posix.
##
AC_MSG_CHECKING([for st_blocks in struct stat])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM[[
#include <sys/stat.h>]],[[struct stat sb; sb.st_blocks=0;]])],
[AC_DEFINE([HAVE_STAT_ST_BLOCKS], [1],
[Define if struct stat has the st_blocks field])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])])
[svn-r339] Changes since 19980408 ---------------------- ./src/H5Osdspace.c ./html/H5.format.html In the past we were allowed to have >2GB files on a 32-bit machine as long as no dataset within the file was larger than 4GB (or whatever sizeof(size_t) is). That's been fixed now. All dataset size calculations are done with `hsize_t' which is normally defined as `unsigned long long'. ./src/H5F.c ./src/H5Ffamily.c ./src/H5Fprivate.h ./src/H5P.c ./src/H5Ppublic.h The file family member size can now be set/queried. The default is still 64MB, but it can be set to 1GB by saying: H5Pset_family (plist, 30, H5P_DEFAULT); When opening an existing file family the specified bits-per-member is ignored and the first member of the family determines the bits-per-member, which can be retrieved with H5Pget_family(). ./acconfig.h ./configure.in ./src/H5config.h ./src/H5public.h Added `--disable-hsizet' so that those with old GCC compilers (<2.8.1) can still compile the code. ./src/H5.c ./src/H5private.h Added HDfprintf() which works just like fprintf() except you can give `H' as a size modifier for the integer conversions and supply an `hsize_t' or `hssize_t' argument without casting it. For instance: hsize_t npoints = H5Sget_npoints(space); HDfprintf(stdout,"Dataset has %Hd (%#018Hx) points\n", npoints, npoints); You can now give `%a' as a format to print an address, but all formating flags are ignored and it causes the return value of HDfprintf() to not include the characters in the address (but who uses the return value anyway :-). Example: H5G_t *grp; HDfprintf(stdout, "Group object header at %a\n", &(grp->ent.header)); Added HDstrtoll() which works exactly like [HD]strtol() except the result is an int64. ./src/debug.c Large addresses can now be entered from the command-line. Use either decimal, octal (leading `0') or hexadecimal (leading `0x') when giving the address. ./src/h5ls.c The printf format for dataset dimensions was changed to `%Hu' to support large datasets. ./test/big.c [NEW] A test for big datasets on 32-bit machines. This test is not run by default. Don't try to run it on an nfs-mounted file system or other file system that doesn't support holes because it creates two 32GB datasets of all zero.
1998-04-10 04:22:11 +08:00
## ----------------------------------------------------------------------
## How do we figure out the width of a tty in characters?
##
AC_CHECK_FUNCS([_getvideoconfig gettextinfo])
case "`uname`" in
CYGWIN*)
;;
*)
AC_CHECK_FUNCS([GetConsoleScreenBufferInfo getpwuid])
;;
esac
AC_CHECK_FUNCS([_scrsize ioctl])
[svn-r879] Changes since 19981105 ---------------------- ./configure.in ./acconfig.h ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Added checks for functions, structs, constants, and header files used in h5ls.c to determine the output width with various Windows compilers and Unix variants. Added check for <sys/stat.h> and defined HAVE_SYS_STAT_H. Included <sys/stat.h> in H5private.h outside the Posix.1 #include's section. ./src/H5RA.c Less aggressive about failing -- rather returns false, which allows type detection to continue. ./src/h5ls.c Data types are displayed for datasets and named data types when `-v' or `--verbose' is specified on the command-line. The algorithm is a little different than the dumper because we're trying to be human-friendly, not necessarily machine-friendly. * Any data type which matches a native C type gets printed something like `native double'. * A floating point type that matches one of the IEEE standard types but not one of the native types gets printed like `IEEE 64-bit big-endian float'. * Other floating point values have information about sign bit location; exponent size, location, and bias; and significand size, location, and normalization. * Padding and offsets are displayed for types that have padding (precision != size), including internal padding for some floating point data types. * Non-native integer types are displayed like `32-bit little-endian unsigned integer'. * Compound data types have each member displayed including the member name, byte offset within the struct, dimensions, index permutation, and data type. * String types are displayed like `256-byte null-terminated ASCII string'. * References are displayed like `8-byte unknown reference' until the reference interface stabilizes a little. * All other types including types not yet defined will be printed like `4-byte class-9 unknown'. The dimensionality of scalar datasets is printed like `{SCALAR}' instead of just `{}'. If external raw files are used to store a dataset then the offsets, sizes, and file names of each are printed if `-v' or `--verbose' was given on the command-line. If an object is found and h5ls can't determine the object type then it still tries to print the number of hard links, the OID, and any comment that might be present if `-v' or `--verbose' was specified. If the `-d' or `--dump' switch is turned on then ragged arrays will report that the data can only be dumped by dumping the component datasets explicitly. I'm not planning to implement this since we're going to eventually change the whole way ragged arrays are stored. Compound data values do not have the component names displayed by default when `-v' or `--verbose' is turned on. Instead, the names can be displayed with `-l' or `--label'. The output width is determined by the first rule that applies: * If the `-wN', `-w N' or `--width=N' switch appeared on the command line then use N for the output width. * Query the OS for the tty width in a highly unportable way borrowed from GNU `less' depending on what functions and data structures were found during configuration (if any): _getvideoconfig(), gettextinfo(), _srcsize(), ioctl(), GetConsoleScreenBufferInfo(), struct videoconfig, struct text_info, the TIOCGWINSZ ioctl, the TIOCGETD ioctl. * If the `COLUMNS' environment variable is set then use its value. * Use the value 80. Just for kicks, run Mark and Jim's test_vbt and then say `h5ls -dlsv test.vbt'. You can also try it on the various *.h5 files in the test/example directories. ./config/linux Removed turning on parallel by default on Robb's macine.
1998-11-07 02:00:22 +08:00
AC_MSG_CHECKING([for struct videoconfig])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]],[[struct videoconfig w; w.numtextcols=0;]])],
[AC_DEFINE([HAVE_STRUCT_VIDEOCONFIG], [1],
[Define if struct videoconfig is defined])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])])
[svn-r879] Changes since 19981105 ---------------------- ./configure.in ./acconfig.h ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Added checks for functions, structs, constants, and header files used in h5ls.c to determine the output width with various Windows compilers and Unix variants. Added check for <sys/stat.h> and defined HAVE_SYS_STAT_H. Included <sys/stat.h> in H5private.h outside the Posix.1 #include's section. ./src/H5RA.c Less aggressive about failing -- rather returns false, which allows type detection to continue. ./src/h5ls.c Data types are displayed for datasets and named data types when `-v' or `--verbose' is specified on the command-line. The algorithm is a little different than the dumper because we're trying to be human-friendly, not necessarily machine-friendly. * Any data type which matches a native C type gets printed something like `native double'. * A floating point type that matches one of the IEEE standard types but not one of the native types gets printed like `IEEE 64-bit big-endian float'. * Other floating point values have information about sign bit location; exponent size, location, and bias; and significand size, location, and normalization. * Padding and offsets are displayed for types that have padding (precision != size), including internal padding for some floating point data types. * Non-native integer types are displayed like `32-bit little-endian unsigned integer'. * Compound data types have each member displayed including the member name, byte offset within the struct, dimensions, index permutation, and data type. * String types are displayed like `256-byte null-terminated ASCII string'. * References are displayed like `8-byte unknown reference' until the reference interface stabilizes a little. * All other types including types not yet defined will be printed like `4-byte class-9 unknown'. The dimensionality of scalar datasets is printed like `{SCALAR}' instead of just `{}'. If external raw files are used to store a dataset then the offsets, sizes, and file names of each are printed if `-v' or `--verbose' was given on the command-line. If an object is found and h5ls can't determine the object type then it still tries to print the number of hard links, the OID, and any comment that might be present if `-v' or `--verbose' was specified. If the `-d' or `--dump' switch is turned on then ragged arrays will report that the data can only be dumped by dumping the component datasets explicitly. I'm not planning to implement this since we're going to eventually change the whole way ragged arrays are stored. Compound data values do not have the component names displayed by default when `-v' or `--verbose' is turned on. Instead, the names can be displayed with `-l' or `--label'. The output width is determined by the first rule that applies: * If the `-wN', `-w N' or `--width=N' switch appeared on the command line then use N for the output width. * Query the OS for the tty width in a highly unportable way borrowed from GNU `less' depending on what functions and data structures were found during configuration (if any): _getvideoconfig(), gettextinfo(), _srcsize(), ioctl(), GetConsoleScreenBufferInfo(), struct videoconfig, struct text_info, the TIOCGWINSZ ioctl, the TIOCGETD ioctl. * If the `COLUMNS' environment variable is set then use its value. * Use the value 80. Just for kicks, run Mark and Jim's test_vbt and then say `h5ls -dlsv test.vbt'. You can also try it on the various *.h5 files in the test/example directories. ./config/linux Removed turning on parallel by default on Robb's macine.
1998-11-07 02:00:22 +08:00
AC_MSG_CHECKING([for struct text_info])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[struct text_info w; w.screenwidth=0;]])],
[AC_DEFINE([HAVE_STRUCT_TEXT_INFO], [1],
[Define if struct text_info is defined])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])])
[svn-r879] Changes since 19981105 ---------------------- ./configure.in ./acconfig.h ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Added checks for functions, structs, constants, and header files used in h5ls.c to determine the output width with various Windows compilers and Unix variants. Added check for <sys/stat.h> and defined HAVE_SYS_STAT_H. Included <sys/stat.h> in H5private.h outside the Posix.1 #include's section. ./src/H5RA.c Less aggressive about failing -- rather returns false, which allows type detection to continue. ./src/h5ls.c Data types are displayed for datasets and named data types when `-v' or `--verbose' is specified on the command-line. The algorithm is a little different than the dumper because we're trying to be human-friendly, not necessarily machine-friendly. * Any data type which matches a native C type gets printed something like `native double'. * A floating point type that matches one of the IEEE standard types but not one of the native types gets printed like `IEEE 64-bit big-endian float'. * Other floating point values have information about sign bit location; exponent size, location, and bias; and significand size, location, and normalization. * Padding and offsets are displayed for types that have padding (precision != size), including internal padding for some floating point data types. * Non-native integer types are displayed like `32-bit little-endian unsigned integer'. * Compound data types have each member displayed including the member name, byte offset within the struct, dimensions, index permutation, and data type. * String types are displayed like `256-byte null-terminated ASCII string'. * References are displayed like `8-byte unknown reference' until the reference interface stabilizes a little. * All other types including types not yet defined will be printed like `4-byte class-9 unknown'. The dimensionality of scalar datasets is printed like `{SCALAR}' instead of just `{}'. If external raw files are used to store a dataset then the offsets, sizes, and file names of each are printed if `-v' or `--verbose' was given on the command-line. If an object is found and h5ls can't determine the object type then it still tries to print the number of hard links, the OID, and any comment that might be present if `-v' or `--verbose' was specified. If the `-d' or `--dump' switch is turned on then ragged arrays will report that the data can only be dumped by dumping the component datasets explicitly. I'm not planning to implement this since we're going to eventually change the whole way ragged arrays are stored. Compound data values do not have the component names displayed by default when `-v' or `--verbose' is turned on. Instead, the names can be displayed with `-l' or `--label'. The output width is determined by the first rule that applies: * If the `-wN', `-w N' or `--width=N' switch appeared on the command line then use N for the output width. * Query the OS for the tty width in a highly unportable way borrowed from GNU `less' depending on what functions and data structures were found during configuration (if any): _getvideoconfig(), gettextinfo(), _srcsize(), ioctl(), GetConsoleScreenBufferInfo(), struct videoconfig, struct text_info, the TIOCGWINSZ ioctl, the TIOCGETD ioctl. * If the `COLUMNS' environment variable is set then use its value. * Use the value 80. Just for kicks, run Mark and Jim's test_vbt and then say `h5ls -dlsv test.vbt'. You can also try it on the various *.h5 files in the test/example directories. ./config/linux Removed turning on parallel by default on Robb's macine.
1998-11-07 02:00:22 +08:00
AC_MSG_CHECKING([for TIOCGWINSZ])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <sys/ioctl.h>
]],[[int w=TIOCGWINSZ;]])],
[AC_DEFINE([HAVE_TIOCGWINSZ], [1],
[Define if the ioctl TIOGWINSZ is defined])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])])
[svn-r879] Changes since 19981105 ---------------------- ./configure.in ./acconfig.h ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Added checks for functions, structs, constants, and header files used in h5ls.c to determine the output width with various Windows compilers and Unix variants. Added check for <sys/stat.h> and defined HAVE_SYS_STAT_H. Included <sys/stat.h> in H5private.h outside the Posix.1 #include's section. ./src/H5RA.c Less aggressive about failing -- rather returns false, which allows type detection to continue. ./src/h5ls.c Data types are displayed for datasets and named data types when `-v' or `--verbose' is specified on the command-line. The algorithm is a little different than the dumper because we're trying to be human-friendly, not necessarily machine-friendly. * Any data type which matches a native C type gets printed something like `native double'. * A floating point type that matches one of the IEEE standard types but not one of the native types gets printed like `IEEE 64-bit big-endian float'. * Other floating point values have information about sign bit location; exponent size, location, and bias; and significand size, location, and normalization. * Padding and offsets are displayed for types that have padding (precision != size), including internal padding for some floating point data types. * Non-native integer types are displayed like `32-bit little-endian unsigned integer'. * Compound data types have each member displayed including the member name, byte offset within the struct, dimensions, index permutation, and data type. * String types are displayed like `256-byte null-terminated ASCII string'. * References are displayed like `8-byte unknown reference' until the reference interface stabilizes a little. * All other types including types not yet defined will be printed like `4-byte class-9 unknown'. The dimensionality of scalar datasets is printed like `{SCALAR}' instead of just `{}'. If external raw files are used to store a dataset then the offsets, sizes, and file names of each are printed if `-v' or `--verbose' was given on the command-line. If an object is found and h5ls can't determine the object type then it still tries to print the number of hard links, the OID, and any comment that might be present if `-v' or `--verbose' was specified. If the `-d' or `--dump' switch is turned on then ragged arrays will report that the data can only be dumped by dumping the component datasets explicitly. I'm not planning to implement this since we're going to eventually change the whole way ragged arrays are stored. Compound data values do not have the component names displayed by default when `-v' or `--verbose' is turned on. Instead, the names can be displayed with `-l' or `--label'. The output width is determined by the first rule that applies: * If the `-wN', `-w N' or `--width=N' switch appeared on the command line then use N for the output width. * Query the OS for the tty width in a highly unportable way borrowed from GNU `less' depending on what functions and data structures were found during configuration (if any): _getvideoconfig(), gettextinfo(), _srcsize(), ioctl(), GetConsoleScreenBufferInfo(), struct videoconfig, struct text_info, the TIOCGWINSZ ioctl, the TIOCGETD ioctl. * If the `COLUMNS' environment variable is set then use its value. * Use the value 80. Just for kicks, run Mark and Jim's test_vbt and then say `h5ls -dlsv test.vbt'. You can also try it on the various *.h5 files in the test/example directories. ./config/linux Removed turning on parallel by default on Robb's macine.
1998-11-07 02:00:22 +08:00
AC_MSG_CHECKING([for TIOCGETD])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <sys/ioctl.h>
]],[[int w=TIOCGETD;]])],
[AC_DEFINE([HAVE_TIOCGETD], [1],
[Define if the ioctl TIOCGETD is defined])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])])
## ----------------------------------------------------------------------
## Check for functions.
##
## NOTE: clock_gettime may require linking to the rt or posix4 library
## so we'll search for it before calling AC_CHECK_FUNCS.
AC_SEARCH_LIBS([clock_gettime], [rt posix4])
AC_CHECK_FUNCS([alarm clock_gettime difftime fcntl flock fork frexpf])
AC_CHECK_FUNCS([frexpl gethostname getrusage gettimeofday])
AC_CHECK_FUNCS([lstat rand_r random setsysinfo])
AC_CHECK_FUNCS([signal longjmp setjmp siglongjmp sigsetjmp sigprocmask])
AC_CHECK_FUNCS([snprintf srandom strdup symlink system])
AC_CHECK_FUNCS([strtoll strtoull])
AC_CHECK_FUNCS([tmpfile asprintf vasprintf vsnprintf waitpid])
AC_CHECK_FUNCS([roundf lroundf llroundf round lround llround])
## ----------------------------------------------------------------------
## Check compiler characteristics
##
[svn-r129] Changes since 19970916 ---------------------- ./config/depend.in Fixed backslashes in sed script because the H5Gnode.c dependency info was disappearing. You'll have to rerun config.status to rebuild the Makefiles unless you use gnu make. ./config/conclude.in Also removes emacs backup files, TAGS, and svf backup files. ./config/linux Grouped gcc flags and added provisions for debugging vs. production. ./html/H5.format.html Updated messages 0x0008, 0x0009, and 0x000A. ./html/storage.html Documentation describing storage schemes. ./src/Makefile.in ./test/Makefile.in New source files. ./src/H5A.c ./src/H5Apublic.h ./src/H5C.c Changed VOIDP to void* in a couple places. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Bprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h ./src/H5H.c ./src/H5O.c Removed `const' from some variables because H5G_node_found() wanted to modify it's udata argument. Removing const there caused it to cascade to these other locations. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5H.c ./src/H5O.c Added an extra argument to H5AC_find_f() and H5AC_protect(). This arg gets passed to the load() method. Also added an extra argument to the H5AC_find() macro. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra argument passed to the sizeof_rkey() method. ./src/H5Fprivate.c ./src/H5Fistore.c (new) Added indexed I/O operations. ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h Beginning to add H5G_open/close and related bug fixes. ./src/H5Oprivate.h ./src/H5Oistore.c (new) Added the H5O_ISTORE messsage (0x0008) for indexed storage of objects. ./src/H5private.h Added extra braces around both sides of the FUNC_ENTER() and FUNC_LEAVE() macros so FUNC_ENTER() can appear before declarations or after executable statements the second case is used by H5G_namei() to initialize output arguments to sane values before FUNC_ENTER() might return failure. int f () { int decl1; printf ("This happens before FUNC_ENTER()\n"); FUNC_ENTER (...); int another_declaration; ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra arguments for key encoding and decoding. ./src/H5E.c ./src/H5Epublic.h ./src/H5Fistore.c ./src/H5Oistore.c ./src/H5Oprivate.h Indexed, chunked, sparse storage (not ready for general consumption yet). ./src/H5V.c (new) ./src/H5Vprivate.h (new) ./test/hyperslab.c (new) Vector, array, and hyperslab functions. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Fistore.c ./src/H5Gnode.c ./src/H5V.c ./src/H5Vprivate.h ./test/hyperslab.c Added functionality for indexed storage. ./src/H5F.c Fixed problems with seek optimizing. Recommend we disable it until we can implement it in the file/address class since all of HDF5 must be aware of it. ./src/H5O.c Fixed comeent speling erorr :-) ./MANIFEST Added new files. ./config/conclude.in Added the word `Testing' to the test cases. So if a test program is called hyperslab then the make output will contain the line `Testing hyperslab'. ./config/linux The default file I/O library is Posix section 2 on my linux machine so I can do some I/O performance testing. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Added ability to set size of indexed-storage B-tree. ./src/H5D.c ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gpublic.h ./src/H5Gshad.c ./src/H5Gstab.c ./test/stab.c Changed `directory' to `group' in numerous places. ./src/H5private.h The FILELIB constant can be set on the compile command-line. ./src/istore.c NEW Tests for indexed storage.
1997-10-21 07:14:35 +08:00
AC_C_CONST
AC_MSG_CHECKING([if the compiler understands __inline__])
AC_COMPILE_IFELSE(
[AC_LANG_SOURCE([[static __inline__ void f(void){return;};]])],
[AC_DEFINE([HAVE___INLINE__], [1], [Define if the compiler understands __inline__]) AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])]
)
AC_MSG_CHECKING([if the compiler understands __inline])
AC_COMPILE_IFELSE(
[AC_LANG_SOURCE([[static __inline void f(void){return;};]])],
[AC_DEFINE([HAVE___INLINE], [1], [Define if the compiler understands __inline]) AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])]
)
AC_MSG_CHECKING([if the compiler understands inline])
AC_COMPILE_IFELSE(
[AC_LANG_SOURCE([[static inline void f(void){return;};]])],
[AC_DEFINE([HAVE_INLINE], [1], [Define if the compiler understands inline]) AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])]
)
[svn-r129] Changes since 19970916 ---------------------- ./config/depend.in Fixed backslashes in sed script because the H5Gnode.c dependency info was disappearing. You'll have to rerun config.status to rebuild the Makefiles unless you use gnu make. ./config/conclude.in Also removes emacs backup files, TAGS, and svf backup files. ./config/linux Grouped gcc flags and added provisions for debugging vs. production. ./html/H5.format.html Updated messages 0x0008, 0x0009, and 0x000A. ./html/storage.html Documentation describing storage schemes. ./src/Makefile.in ./test/Makefile.in New source files. ./src/H5A.c ./src/H5Apublic.h ./src/H5C.c Changed VOIDP to void* in a couple places. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Bprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h ./src/H5H.c ./src/H5O.c Removed `const' from some variables because H5G_node_found() wanted to modify it's udata argument. Removing const there caused it to cascade to these other locations. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5H.c ./src/H5O.c Added an extra argument to H5AC_find_f() and H5AC_protect(). This arg gets passed to the load() method. Also added an extra argument to the H5AC_find() macro. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra argument passed to the sizeof_rkey() method. ./src/H5Fprivate.c ./src/H5Fistore.c (new) Added indexed I/O operations. ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h Beginning to add H5G_open/close and related bug fixes. ./src/H5Oprivate.h ./src/H5Oistore.c (new) Added the H5O_ISTORE messsage (0x0008) for indexed storage of objects. ./src/H5private.h Added extra braces around both sides of the FUNC_ENTER() and FUNC_LEAVE() macros so FUNC_ENTER() can appear before declarations or after executable statements the second case is used by H5G_namei() to initialize output arguments to sane values before FUNC_ENTER() might return failure. int f () { int decl1; printf ("This happens before FUNC_ENTER()\n"); FUNC_ENTER (...); int another_declaration; ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra arguments for key encoding and decoding. ./src/H5E.c ./src/H5Epublic.h ./src/H5Fistore.c ./src/H5Oistore.c ./src/H5Oprivate.h Indexed, chunked, sparse storage (not ready for general consumption yet). ./src/H5V.c (new) ./src/H5Vprivate.h (new) ./test/hyperslab.c (new) Vector, array, and hyperslab functions. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Fistore.c ./src/H5Gnode.c ./src/H5V.c ./src/H5Vprivate.h ./test/hyperslab.c Added functionality for indexed storage. ./src/H5F.c Fixed problems with seek optimizing. Recommend we disable it until we can implement it in the file/address class since all of HDF5 must be aware of it. ./src/H5O.c Fixed comeent speling erorr :-) ./MANIFEST Added new files. ./config/conclude.in Added the word `Testing' to the test cases. So if a test program is called hyperslab then the make output will contain the line `Testing hyperslab'. ./config/linux The default file I/O library is Posix section 2 on my linux machine so I can do some I/O performance testing. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Added ability to set size of indexed-storage B-tree. ./src/H5D.c ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gpublic.h ./src/H5Gshad.c ./src/H5Gstab.c ./test/stab.c Changed `directory' to `group' in numerous places. ./src/H5private.h The FILELIB constant can be set on the compile command-line. ./src/istore.c NEW Tests for indexed storage.
1997-10-21 07:14:35 +08:00
AC_MSG_CHECKING([for __attribute__ extension])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]],[[int __attribute__((unused)) x]])],
[AC_DEFINE([HAVE_ATTRIBUTE], [1],
[Define if the __attribute__(()) extension is present])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])])
[svn-r129] Changes since 19970916 ---------------------- ./config/depend.in Fixed backslashes in sed script because the H5Gnode.c dependency info was disappearing. You'll have to rerun config.status to rebuild the Makefiles unless you use gnu make. ./config/conclude.in Also removes emacs backup files, TAGS, and svf backup files. ./config/linux Grouped gcc flags and added provisions for debugging vs. production. ./html/H5.format.html Updated messages 0x0008, 0x0009, and 0x000A. ./html/storage.html Documentation describing storage schemes. ./src/Makefile.in ./test/Makefile.in New source files. ./src/H5A.c ./src/H5Apublic.h ./src/H5C.c Changed VOIDP to void* in a couple places. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Bprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h ./src/H5H.c ./src/H5O.c Removed `const' from some variables because H5G_node_found() wanted to modify it's udata argument. Removing const there caused it to cascade to these other locations. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5H.c ./src/H5O.c Added an extra argument to H5AC_find_f() and H5AC_protect(). This arg gets passed to the load() method. Also added an extra argument to the H5AC_find() macro. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra argument passed to the sizeof_rkey() method. ./src/H5Fprivate.c ./src/H5Fistore.c (new) Added indexed I/O operations. ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h Beginning to add H5G_open/close and related bug fixes. ./src/H5Oprivate.h ./src/H5Oistore.c (new) Added the H5O_ISTORE messsage (0x0008) for indexed storage of objects. ./src/H5private.h Added extra braces around both sides of the FUNC_ENTER() and FUNC_LEAVE() macros so FUNC_ENTER() can appear before declarations or after executable statements the second case is used by H5G_namei() to initialize output arguments to sane values before FUNC_ENTER() might return failure. int f () { int decl1; printf ("This happens before FUNC_ENTER()\n"); FUNC_ENTER (...); int another_declaration; ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra arguments for key encoding and decoding. ./src/H5E.c ./src/H5Epublic.h ./src/H5Fistore.c ./src/H5Oistore.c ./src/H5Oprivate.h Indexed, chunked, sparse storage (not ready for general consumption yet). ./src/H5V.c (new) ./src/H5Vprivate.h (new) ./test/hyperslab.c (new) Vector, array, and hyperslab functions. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Fistore.c ./src/H5Gnode.c ./src/H5V.c ./src/H5Vprivate.h ./test/hyperslab.c Added functionality for indexed storage. ./src/H5F.c Fixed problems with seek optimizing. Recommend we disable it until we can implement it in the file/address class since all of HDF5 must be aware of it. ./src/H5O.c Fixed comeent speling erorr :-) ./MANIFEST Added new files. ./config/conclude.in Added the word `Testing' to the test cases. So if a test program is called hyperslab then the make output will contain the line `Testing hyperslab'. ./config/linux The default file I/O library is Posix section 2 on my linux machine so I can do some I/O performance testing. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Added ability to set size of indexed-storage B-tree. ./src/H5D.c ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gpublic.h ./src/H5Gshad.c ./src/H5Gstab.c ./test/stab.c Changed `directory' to `group' in numerous places. ./src/H5private.h The FILELIB constant can be set on the compile command-line. ./src/istore.c NEW Tests for indexed storage.
1997-10-21 07:14:35 +08:00
AC_MSG_CHECKING([for __func__ extension])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]],[[ const char *fname = __func__; ]])],
[AC_DEFINE([HAVE_C99_FUNC], [1],
[Define if the compiler understands the __func__ keyword])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])])
AC_MSG_CHECKING([for __FUNCTION__ extension])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]],,[[ const char *fname = __FUNCTION__; ]])],
[AC_DEFINE([HAVE_FUNCTION], [1],
[Define if the compiler understands the __FUNCTION__ keyword])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])])
AC_MSG_CHECKING([for C99 designated initialization support])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
typedef struct {
int x;
union {
int i;
double d;
} u;
} di_struct_t;
di_struct_t x = {0, { .d = 0.0}}; ]])],
[AC_DEFINE([HAVE_C99_DESIGNATED_INITIALIZER], [1],
[Define if the compiler understands C99 designated initialization of structs and unions])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])])
## ----------------------------------------------------------------------
## Try to figure out how to print `long long'. Some machines use `%lld'
## and others use `%qd'. There may be more! The final `l' is a
## default in case none of the others work.
##
AC_MSG_CHECKING([how to print long long])
AC_CACHE_VAL([hdf5_cv_printf_ll], [
for hdf5_cv_printf_ll in l ll L q unknown; do
AC_RUN_IFELSE(
[AC_LANG_PROGRAM([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
],[[
char *s = malloc(128);
long long x = (long long)1048576 * (long long)1048576;
sprintf(s,"%${hdf5_cv_printf_ll}d",x);
exit(strcmp(s,"1099511627776"));
]])]
, [break],,[continue])
done])
AC_MSG_RESULT([%${hdf5_cv_printf_ll}d and %${hdf5_cv_printf_ll}u])
AC_DEFINE_UNQUOTED([PRINTF_LL_WIDTH], ["$hdf5_cv_printf_ll"],
[Width for printf() for type `long long' or `__int64', use `ll'])
## ----------------------------------------------------------------------
## Remove old ways of determining debug/production build.
## These were used in 1.8.x and earlier. We should probably keep these checks
## around to help people migrate to 1.10.x and newer versions.
##
AC_ARG_ENABLE([debug],
[AS_HELP_STRING([--enable-debug], [OPTION CHANGE: use --enable-build-mode=debug])],
[AC_MSG_ERROR([--enable-debug is no longer supported, use --enable-build-mode=debug instead.])])
AC_ARG_ENABLE([production],
[AS_HELP_STRING([--enable-production], [OPTION CHANGE: use --enable-build-mode=production])],
[AC_MSG_ERROR([--enable-production is no longer supported, use --enable-build-mode=production instead.])])
## ----------------------------------------------------------------------
## Check if the compiler should include symbols
##
AC_MSG_CHECKING([enable debugging symbols])
AC_ARG_ENABLE([symbols],
[AS_HELP_STRING([--enable-symbols=(yes|no|<custom>)],
[Add debug symbols to the library (e.g.: build with -g).
This is independent of the build mode and optimization
level. The custom string allows special settings like
-ggdb, etc. to be used.
[default=yes if debug build, otherwise no]
])],
[SYMBOLS=$enableval])
## Set default
if test "X-$SYMBOLS" = X- ; then
if test "X-$BUILD_MODE" = "X-debug" ; then
SYMBOLS=yes
else
SYMBOLS=no
fi
fi
## Allow this variable to be substituted in
## other files (src/libhdf5.settings.in, etc.)
AC_SUBST([SYMBOLS])
case "X-$SYMBOLS" in
X-yes)
H5_CFLAGS="$H5_CFLAGS $SYMBOLS_CFLAGS"
H5_CXXFLAGS="$H5_CXXFLAGS $SYMBOLS_CXXFLAGS"
H5_FCFLAGS="$H5_FCFLAGS $SYMBOLS_FCFLAGS"
AC_MSG_RESULT([yes])
;;
X-no)
H5_CFLAGS="$H5_CFLAGS $NO_SYMBOLS_CFLAGS"
H5_CXXFLAGS="$H5_CXXFLAGS $NO_SYMBOLS_CXXFLAGS"
H5_FCFLAGS="$H5_FCFLAGS $NO_SYMBOLS_FCFLAGS"
AC_MSG_RESULT([no])
;;
*)
H5_CFLAGS="$H5_CFLAGS $SYMBOLS"
H5_CXXFLAGS="$H5_CXXFLAGS $SYMBOLS"
H5_FCFLAGS="$H5_FCFLAGS $SYMBOLS"
SYMBOLS="custom ($SYMBOLS)"
AC_MSG_RESULT([$SYMBOLS])
;;
esac
## ----------------------------------------------------------------------
## Check if the assert macro should be enabled
##
AC_MSG_CHECKING([enable asserts])
AC_ARG_ENABLE([asserts],
[AS_HELP_STRING([--enable-asserts],
[Determines whether NDEBUG is defined or not, which
controls assertions.
This is independent of the build mode and presence
of debugging symbols.
[default=yes if debug build, otherwise no]
])],
[ASSERTS=$enableval])
## Set default
if test "X-$ASSERTS" = X- ; then
if test "X-$BUILD_MODE" = "X-debug" ; then
ASSERTS=yes
else
ASSERTS=no
fi
fi
## Allow this variable to be substituted in
## other files (src/libhdf5.settings.in, etc.)
AC_SUBST([ASSERTS])
case "X-$ASSERTS" in
X-yes)
H5_CPPFLAGS="$H5_CPPFLAGS -UNDEBUG"
AC_MSG_RESULT([yes])
;;
X-no)
H5_CPPFLAGS="$H5_CPPFLAGS -DNDEBUG"
AC_MSG_RESULT([no])
;;
*)
AC_MSG_ERROR([Unrecognized value: $ASSERTS])
;;
esac
## ----------------------------------------------------------------------
## Check if developer warnings should be turned on
## These are warnings that provide suggestions like gcc's -Wsuggest-attribute.
## They do not indicate code problems.
##
## Note that developers don't need to build with these regularly. They
## are just handy to check once in a while (before releases, etc.).
##
AC_MSG_CHECKING([enable developer warnings])
AC_ARG_ENABLE([developer-warnings],
[AS_HELP_STRING([--enable-developer-warnings],
[Determines whether developer warnings will be
emitted. These are usually performance suggestions
(e.g. -Wsuggest-attribute) and do not flag poor code
quality.
[default=no]
])],
[DEV_WARNINGS=$enableval])
## Set default
if test "X-$DEV_WARNINGS" = X- ; then
DEV_WARNINGS=no
fi
## Allow this variable to be substituted in
## other files (src/libhdf5.settings.in, etc.)
AC_SUBST([DEV_WARNINGS])
case "X-$DEV_WARNINGS" in
X-yes)
H5_CFLAGS="$H5_CFLAGS $DEVELOPER_WARNING_CFLAGS"
AC_MSG_RESULT([yes])
;;
X-no)
H5_CFLAGS="$H5_CFLAGS $NO_DEVELOPER_WARNING_CFLAGS"
AC_MSG_RESULT([no])
;;
*)
AC_MSG_ERROR([Unrecognized value: $DEV_WARNINGS])
;;
esac
## ----------------------------------------------------------------------
## Check if the compiler should use profiling flags/settings
##
AC_MSG_CHECKING([profiling])
AC_ARG_ENABLE([profiling],
[AS_HELP_STRING([--enable-profiling=(yes|no|<custom>)],
[Enable profiling flags (e.g.: -pg).
This can be set independently from the build mode.
The custom setting can be used to pass alternative
profiling flags (e.g.: -P for using Prof with gcc).
[default=no]
])],
[PROFILING=$enableval])
## Default is no profiling
if test "X-$PROFILING" = X- ; then
PROFILING=no
fi
## Allow this variable to be substituted in
## other files (src/libhdf5.settings.in, etc.)
AC_SUBST([PROFILING])
case "X-$PROFILING" in
X-yes)
H5_CFLAGS="$H5_CFLAGS $PROFILE_CFLAGS"
H5_CXXFLAGS="$H5_CXXFLAGS $PROFILE_CXXFLAGS"
H5_FCFLAGS="$H5_FCFLAGS $PROFILE_FCFLAGS"
AC_MSG_RESULT([yes])
;;
X-no)
AC_MSG_RESULT([no])
;;
*)
H5_CFLAGS="$H5_CFLAGS $PROFILING"
H5_CXXFLAGS="$H5_CXXFLAGS $PROFILING"
H5_FCFLAGS="$H5_FCFLAGS $PROFILING"
PROFILING="custom ($PROFILING)"
AC_MSG_RESULT([$PROFILING])
;;
esac
## ----------------------------------------------------------------------
## Check if the compiler should use a particular optimization setting
##
AC_MSG_CHECKING([optimization level])
AC_ARG_ENABLE([optimization],
[AS_HELP_STRING([--enable-optimization=(high|debug|none|<custom>)],
[Enable optimization flags/settings (e.g.: -O3).
This can be set independently from the build mode.
Optimizations for a given compiler can be specified
at several levels: High, with aggressive optimizations
turned on; debug, with optimizations that are
unlikely to interfere with debugging or profiling;
and none, with no optimizations at all.
See the compiler-specific config/*-flags file for more
details.
Alternatively, optimization options can
be specified directly by specifying them as a
string value. These custom optimzation flags will
completely replace all other optimization flags.
[default depends on build mode: debug=debug,
production=high, clean=none]
])],
[OPTIMIZATION=$enableval])
## Set the default optimization level. This depends on the compiler mode.
if test "X-$OPTIMIZATION" = X- ; then
case "X-$BUILD_MODE" in
X-debug)
OPTIMIZATION=debug
;;
X-production)
OPTIMIZATION=high
;;
X-clean)
OPTIMIZATION=none
;;
esac
fi
## Allow this variable to be substituted in
## other files (src/libhdf5.settings.in, etc.)
AC_SUBST([OPTIMIZATION])
case "X-$OPTIMIZATION" in
X-high)
H5_CFLAGS="$H5_CFLAGS $HIGH_OPT_CFLAGS"
H5_CXXFLAGS="$H5_CXXFLAGS $HIGH_OPT_CXXFLAGS"
H5_FCFLAGS="$H5_FCFLAGS $HIGH_OPT_FCFLAGS"
AC_MSG_RESULT([high])
;;
X-debug)
H5_CFLAGS="$H5_CFLAGS $DEBUG_OPT_CFLAGS"
H5_CXXFLAGS="$H5_CXXFLAGS $DEBUG_OPT_CXXFLAGS"
H5_FCFLAGS="$H5_FCFLAGS $DEBUG_OPT_FCFLAGS"
AC_MSG_RESULT([debug])
;;
X-none)
H5_CFLAGS="$H5_CFLAGS $NO_OPT_CFLAGS"
H5_CXXFLAGS="$H5_CXXFLAGS $NO_OPT_CXXFLAGS"
H5_FCFLAGS="$H5_FCFLAGS $NO_OPT_FCFLAGS"
AC_MSG_RESULT([none])
;;
*)
H5_CFLAGS="$H5_CFLAGS $OPTIMIZATION"
H5_CXXFLAGS="$H5_CXXFLAGS $OPTIMIZATION"
H5_FCFLAGS="$H5_FCFLAGS $OPTIMIZATION"
OPTIMIZATION="custom ($OPTIMIZATION)"
AC_MSG_RESULT([$OPTIMIZATION])
;;
esac
## ----------------------------------------------------------------------
## Enable/disable internal package-level debugging output
##
AC_MSG_CHECKING([for internal debug output])
AC_ARG_ENABLE([internal-debug],
[AS_HELP_STRING([--enable-internal-debug=(yes|all|no|none|<pkg list>)],
[Enable extra debugging output on HDF5 library
errors. One may also specify a comma-separated
list of package names without the leading H5.
This is independent of the build mode
and is mainly of interest to HDF Group developers.
Yes/all and no/none are synonymous.
[default=all if debug build, otherwise none]
])],
[INTERNAL_DEBUG_OUTPUT=$enableval])
## Set default
if test "X-$INTERNAL_DEBUG_OUTPUT" = X- ; then
if test "X-$BUILD_MODE" = "X-debug" ; then
INTERNAL_DEBUG_OUTPUT=all
else
INTERNAL_DEBUG_OUTPUT=none
fi
fi
AC_SUBST([INTERNAL_DEBUG_OUTPUT])
## These are all the packages that use H5*_DEBUG.
## There is no harm in specifying a package not in this list;
## you'll just get an unused H5<pkg>_DEBUG symbol.
##
## Some packages that define debug checks or output are
## too specialized or have huge performance hits. These
## are not listed in the "all" packages list.
##
## all_packages="AC,B,B2,D,F,FA,FL,FS,HL,I,O,S,ST,T,Z"
all_packages="AC,B2,CX,D,F,HL,I,O,S,ST,T,Z"
case "X-$INTERNAL_DEBUG_OUTPUT" in
X-yes|X-all)
INTERNAL_DEBUG_OUTPUT=$all_packages
DEBUG_PKG_LIST=$all_packages
;;
X-no|X-none)
INTERNAL_DEBUG_OUTPUT=none
DEBUG_PKG_LIST=
;;
*)
DEBUG_PKG_LIST=$INTERNAL_DEBUG_OUTPUT
;;
esac
AC_MSG_RESULT([$INTERNAL_DEBUG_OUTPUT])
[svn-r335] Changes since 19980330 ---------------------- ./MANIFEST ./src/Makefile.in ./test/Makefile.in Added new files. ./config/linux ./src/H5HL.c ./src/H5HLprivate.h ./src/H5MF.c ./src/H5MFprivate.h Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list. ./html/H5.format.html Updated shared object message information. ./src/H5D.c Datasets can now share data types. ./src/H5F.c Updated a comment that referred to H5ACC_WRITE. ./src/H5HG.c ./src/H5HGprivate.h Moved a few things around. Made debugging better so you can now give a collection address to ./src/debug and it shows some useful stuff. ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c [NEW] ./src/H5Ostab.c Supports shared messages. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h The H5Tshare() function allows the user to give the library hints about how a data type will be used. ./test/shtype.c Tests the H5Tshare() function. ./test/gheap.c Tests the global heap. ./configure.in ./config/BlankForm [NEW] ./config/alpha-dec ./config/freebsd2.2.1 ./config/hpux10.20 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 Cleaned up lots of configuration stuff and made the site configuration files lots easier and more uniform. To make a new file grab the BlankForm and modify it. By default, debugging is turned on for most packages. Within a package one can use `#ifdef H5AC_DEBUG' to wrap debugging code. Other options are: --enable-debug --enable-debug=yes The default, most but not all packages. --disable-debug --enable-debug=no --enable-debug=none The symbol NDEBUG is defined and none of the package debug symbols. --enable-debug=all Debugging is turned on for all packages. This might produce lots of output. --enable-debug=g,d Debugging is turned on for H5G and H5D. A compile mode is also now supported --enable-production --enable-production=yes The library is compiled with optimizations turned on. The compiler flags are augmented by adding PROD_CFLAGS and PROD_CPPFLAGS which are defined in the site config file. --disable-production --enable-production=no The default. The library is compiled for development by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in the site config file. This is usually just `-g'. --enable-production=profile --enable-production=pg Builds a library for profiling by including the flags from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the site config file. This is usullay just `-pg' but it could include optimization flags as well depending on the type of profile one wants. In summary, configure by saying `./configure' and you'll get a development version of the library. Configure by saying `./configure --enable-production --disable-debug' and you'll get a production version with no debugging code.
1998-04-03 11:29:38 +08:00
## Define H5*_DEBUG symbols that control package output
## NOTE: No sanity checking done here!
if test -n "$DEBUG_PKG_LIST"; then
for pkg in `echo $DEBUG_PKG_LIST | ${TR} ${as_cr_letters}"," ${as_cr_LETTERS}" "`; do
H5_CPPFLAGS="$H5_CPPFLAGS -DH5${pkg}_DEBUG"
done
[svn-r335] Changes since 19980330 ---------------------- ./MANIFEST ./src/Makefile.in ./test/Makefile.in Added new files. ./config/linux ./src/H5HL.c ./src/H5HLprivate.h ./src/H5MF.c ./src/H5MFprivate.h Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list. ./html/H5.format.html Updated shared object message information. ./src/H5D.c Datasets can now share data types. ./src/H5F.c Updated a comment that referred to H5ACC_WRITE. ./src/H5HG.c ./src/H5HGprivate.h Moved a few things around. Made debugging better so you can now give a collection address to ./src/debug and it shows some useful stuff. ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c [NEW] ./src/H5Ostab.c Supports shared messages. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h The H5Tshare() function allows the user to give the library hints about how a data type will be used. ./test/shtype.c Tests the H5Tshare() function. ./test/gheap.c Tests the global heap. ./configure.in ./config/BlankForm [NEW] ./config/alpha-dec ./config/freebsd2.2.1 ./config/hpux10.20 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 Cleaned up lots of configuration stuff and made the site configuration files lots easier and more uniform. To make a new file grab the BlankForm and modify it. By default, debugging is turned on for most packages. Within a package one can use `#ifdef H5AC_DEBUG' to wrap debugging code. Other options are: --enable-debug --enable-debug=yes The default, most but not all packages. --disable-debug --enable-debug=no --enable-debug=none The symbol NDEBUG is defined and none of the package debug symbols. --enable-debug=all Debugging is turned on for all packages. This might produce lots of output. --enable-debug=g,d Debugging is turned on for H5G and H5D. A compile mode is also now supported --enable-production --enable-production=yes The library is compiled with optimizations turned on. The compiler flags are augmented by adding PROD_CFLAGS and PROD_CPPFLAGS which are defined in the site config file. --disable-production --enable-production=no The default. The library is compiled for development by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in the site config file. This is usually just `-g'. --enable-production=profile --enable-production=pg Builds a library for profiling by including the flags from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the site config file. This is usullay just `-pg' but it could include optimization flags as well depending on the type of profile one wants. In summary, configure by saying `./configure' and you'll get a development version of the library. Configure by saying `./configure --enable-production --disable-debug' and you'll get a production version with no debugging code.
1998-04-03 11:29:38 +08:00
fi
## ----------------------------------------------------------------------
## Check if they would like the function stack support compiled in
##
AC_MSG_CHECKING([whether function stack tracking is enabled])
AC_ARG_ENABLE([codestack],
[AS_HELP_STRING([--enable-codestack],
[Enable the function stack tracing (for developer debugging).
[default=no]
])],
[CODESTACK=$enableval])
## Set the default level.
if test "X-$CODESTACK" = X- ; then
CODESTACK=no
fi
## Allow this variable to be substituted in
## other files (src/libhdf5.settings.in, etc.)
AC_SUBST([CODESTACK])
case "X-$CODESTACK" in
X-yes)
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_CODESTACK], [1],
[Define if the function stack tracing code is to be compiled in])
;;
X-no)
AC_MSG_RESULT([no])
;;
*)
AC_MSG_ERROR([Unrecognized value: $CODESTACK])
;;
esac
## ----------------------------------------------------------------------
## Enable tracing of the API
##
AC_MSG_CHECKING([for API tracing]);
AC_ARG_ENABLE([trace],
[AS_HELP_STRING([--enable-trace],
[Enable HDF5 API tracing capability.
[default=yes if debug build, otherwise no]
])],
[TRACE_API=$enableval])
## Set the default level.
if test "X-$TRACE_API" = X- ; then
if test "X-$BUILD_MODE" = "X-debug" ; then
TRACE_API=yes
else
TRACE_API=no
fi
fi
## Allow this variable to be substituted in
## other files (src/libhdf5.settings.in, etc.)
AC_SUBST([TRACE_API])
case "X-$TRACE_API" in
X-yes)
AC_MSG_RESULT([yes])
H5_CPPFLAGS="$H5_CPPFLAGS -DH5_DEBUG_API"
;;
X-no)
AC_MSG_RESULT([no])
H5_CPPFLAGS="$H5_CPPFLAGS -UH5_DEBUG_API"
;;
*)
AC_MSG_ERROR([Unrecognized value: $TRACE_API])
;;
esac
## ----------------------------------------------------------------------
## Check if they would like to use a memory checking tool (like valgrind's
## 'memcheck' tool, or Rational Purify, etc) and the library should be
## more scrupulous with it's memory operations. Enabling this also
## disables the library's free space manager code.
##
AC_MSG_CHECKING([whether a memory checking tool will be used])
AC_ARG_ENABLE([using-memchecker],
[AS_HELP_STRING([--enable-using-memchecker],
[Enable this option if a memory allocation and/or
bounds checking tool will be used on the HDF5
library. Enabling this causes the library to be
more picky about its memory operations and also
disables the library's free space manager code.
This option is orthogonal to the
--enable-memory-alloc-sanity-check option.
[default=no]
])],
[USINGMEMCHECKER=$enableval])
## Allow this variable to be substituted in
## other files (src/libhdf5.settings.in, etc.)
AC_SUBST([USINGMEMCHECKER])
## Set the default level.
if test "X-$USINGMEMCHECKER" = X- ; then
USINGMEMCHECKER=no
fi
case "X-$USINGMEMCHECKER" in
X-yes)
AC_DEFINE([USING_MEMCHECKER], [1],
[Define if a memory checking tool will be used on the library,
to cause library to be very picky about memory operations and
also disable the internal free list manager code.])
AC_MSG_RESULT([yes])
;;
X-no)
AC_MSG_RESULT([no])
;;
*)
AC_MSG_ERROR([Unrecognized value: $USINGMEMCHECKER])
;;
esac
## ----------------------------------------------------------------------
## Check if they would like to enable the internal memory allocation sanity
## checking code.
##
AC_MSG_CHECKING([whether internal memory allocation sanity checking is used])
AC_ARG_ENABLE([memory-alloc-sanity-check],
[AS_HELP_STRING([--enable-memory-alloc-sanity-check],
[Enable this option to turn on internal memory
allocation sanity checking. This could cause
more memory use and somewhat slower allocation.
This option is orthogonal to the
--enable-using-memchecker option.
[default=yes if debug build, otherwise no]
])],
[MEMORYALLOCSANITYCHECK=$enableval])
## Allow this variable to be substituted in
## other files (src/libhdf5.settings.in, etc.)
AC_SUBST([MEMORYALLOCSANITYCHECK])
## Set default
if test "X-$MEMORYALLOCSANITYCHECK" = X- ; then
if test "X-$BUILD_MODE" = "X-debug" ; then
MEMORYALLOCSANITYCHECK=yes
else
MEMORYALLOCSANITYCHECK=no
fi
fi
case "X-$MEMORYALLOCSANITYCHECK" in
X-yes)
AC_DEFINE([MEMORY_ALLOC_SANITY_CHECK], [1],
[Define to enable internal memory allocation sanity checking.])
AC_MSG_RESULT([yes])
;;
X-no)
AC_MSG_RESULT([no])
;;
*)
AC_MSG_ERROR([Unrecognized value: $MEMORYALLOCSANITYCHECK])
;;
esac
## Checkpoint the cache
AC_CACHE_SAVE
## What header files and libraries do we have to look for for parallel
## support? For the most part, search paths are already specified with
## CPPFLAGS and LDFLAGS or are known to the compiler.
##
AC_ARG_ENABLE([parallel],
[AS_HELP_STRING([--enable-parallel],
[Search for MPI-IO and MPI support files])])
[svn-r1115] Changes since 19990302 ---------------------- ./INSTALL ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Improvements for parallel library. If you have a properly working mpicc you should be able to just say: $ CC=mpicc ./configure and you will see checking for mpirun... /usr/local/mpi/bin/mpirun checking for parallel support files... skipped checking how to run on one processor... /usr/local/mpi/bin/mpirun -np 1 checking how to run in parallel... /usr/local/mpi/bin/mpirun -np $$NPROCS To quote from the INSTALL file.... *** Parallel vs. serial library The HDF5 library can be configured to use MPI and MPI-IO for parallelizm on a distributed multi-processor system. The easy way to do this is to have a properly installed parallel compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that executable as the value of the CC environment variable: [NOTE: mpcc is not tested yet] $ CC=mpcc ./configure $ CC=/usr/local/mpi/bin/mpicc ./configure If no such wrapper script is available then you must specify your normal C compiler along with the distribution of MPI/MPI-IO which is to be used (values other than `mpich' will be added at a later date): $ ./configure --enable-parallel=mpich If the MPI/MPI-IO include files and/or libraries cannot be found by the compiler then their directories must be given as arguments to CPPFLAGS and/or LDFLAGS: $ CPPFLAGS=-I/usr/local/mpi/include \ LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \ ./configure --enable-parallel=mpich If a parallel library is being built then configure attempts to determine how to run a parallel application on one processor and on many processors. If the compiler is mpicc and the user hasn't specified values for RUNSERIAL and RUNPARALLEL then configure chooses `mpirun' from the same directory as `mpicc': RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1 RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2} The `$${NPROCS:=2}' will be substituted with the value of the NPROCS environment variable at the time `make check' is run (or the value 2). ./testpar/Makefile.in Saying `make check' (or `make test') will run the tests on two processors by default. If you define NPROCS then that many processors are used instead: $ NPROCS=4 make check ./configure.in Fixed (hopefully) bugs with detecting whether __attribute__ and __FUNCTION__ are special keywords for the compiler. ./Makefile.in Saying `make install' from the top level directory shows instructions for using shared libraries. ./config/commence.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Moved the @top_srcdir@ into the makefiles because it was expanded too early and had the wrong value. ./INSTALL Added a warning that if the wrong version of hdf4 tools are installed then `make check' will fail in the tools directory.
1999-03-04 07:17:48 +08:00
## The --enable-parallel flag is not compatible with --enable-cxx.
## If the user tried to specify both flags, throw an error, unless
## they also provided the --enable-unsupported flag.
if test "X${ALLOW_UNSUPPORTED}" != "Xyes"; then
if test "X${HDF_CXX}" = "Xyes" -a "X${enable_parallel}" = "Xyes"; then
AC_MSG_ERROR([--enable-cxx and --enable-parallel flags are incompatible. Use --enable-unsupported to override this error.])
fi
fi
## The --enable-parallel flag is not compatible with --enable-java.
## If the user tried to specify both flags, throw an error, unless
## they also provided the --enable-unsupported flag.
if test "X${ALLOW_UNSUPPORTED}" != "Xyes"; then
if test "X${HDF_JAVA}" = "Xyes" -a "X${enable_parallel}" = "Xyes"; then
AC_MSG_ERROR([--enable-java and --enable-parallel flags are incompatible. Use --enable-unsupported to override this error.])
fi
fi
## --enable-parallel is also incompatible with --enable-threadsafe, unless
## --enable-unsupported has been specified on the configure line.
if test "X${ALLOW_UNSUPPORTED}" != "Xyes"; then
if test "X${THREADSAFE}" = "Xyes" -a "X${enable_parallel}" = "Xyes"; then
AC_MSG_ERROR([--enable-threadsafe and --enable-parallel flags are incompatible. Use --enable-unsupported to override this error.])
fi
fi
AC_MSG_CHECKING([for parallel support files])
[svn-r1115] Changes since 19990302 ---------------------- ./INSTALL ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Improvements for parallel library. If you have a properly working mpicc you should be able to just say: $ CC=mpicc ./configure and you will see checking for mpirun... /usr/local/mpi/bin/mpirun checking for parallel support files... skipped checking how to run on one processor... /usr/local/mpi/bin/mpirun -np 1 checking how to run in parallel... /usr/local/mpi/bin/mpirun -np $$NPROCS To quote from the INSTALL file.... *** Parallel vs. serial library The HDF5 library can be configured to use MPI and MPI-IO for parallelizm on a distributed multi-processor system. The easy way to do this is to have a properly installed parallel compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that executable as the value of the CC environment variable: [NOTE: mpcc is not tested yet] $ CC=mpcc ./configure $ CC=/usr/local/mpi/bin/mpicc ./configure If no such wrapper script is available then you must specify your normal C compiler along with the distribution of MPI/MPI-IO which is to be used (values other than `mpich' will be added at a later date): $ ./configure --enable-parallel=mpich If the MPI/MPI-IO include files and/or libraries cannot be found by the compiler then their directories must be given as arguments to CPPFLAGS and/or LDFLAGS: $ CPPFLAGS=-I/usr/local/mpi/include \ LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \ ./configure --enable-parallel=mpich If a parallel library is being built then configure attempts to determine how to run a parallel application on one processor and on many processors. If the compiler is mpicc and the user hasn't specified values for RUNSERIAL and RUNPARALLEL then configure chooses `mpirun' from the same directory as `mpicc': RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1 RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2} The `$${NPROCS:=2}' will be substituted with the value of the NPROCS environment variable at the time `make check' is run (or the value 2). ./testpar/Makefile.in Saying `make check' (or `make test') will run the tests on two processors by default. If you define NPROCS then that many processors are used instead: $ NPROCS=4 make check ./configure.in Fixed (hopefully) bugs with detecting whether __attribute__ and __FUNCTION__ are special keywords for the compiler. ./Makefile.in Saying `make install' from the top level directory shows instructions for using shared libraries. ./config/commence.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Moved the @top_srcdir@ into the makefiles because it was expanded too early and had the wrong value. ./INSTALL Added a warning that if the wrong version of hdf4 tools are installed then `make check' will fail in the tools directory.
1999-03-04 07:17:48 +08:00
case "X-$enable_parallel" in
X-|X-no|X-none)
## We are not compiling for parallel.
AC_MSG_RESULT([skipped])
;;
X-yes)
## We want to compile a parallel library with a compiler that
## may already know how to link with MPI and MPI-IO.
AC_MSG_RESULT([provided by compiler])
PARALLEL=yes
## Try link a simple MPI program.
AC_MSG_CHECKING([whether a simple MPI-IO C program can be linked])
AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <mpi.h>]],
[[ MPI_Init(0, (void *)0);
MPI_File_open(0, (void *)0, 0, 0, (void *)0);]])],
[AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])
AC_MSG_ERROR([unable to link a simple MPI-IO C program])])
if test "X$HDF_FORTRAN" = "Xyes"; then
PAC_PROG_FC_MPI_CHECK
fi
## Set RUNPARALLEL to mpiexec if not set yet.
if test "X$PARALLEL" = "Xyes" -a -z "$RUNPARALLEL"; then
RUNPARALLEL="mpiexec -n \$\${NPROCS:=6}"
fi
;;
*)
AC_MSG_RESULT([error])
AC_MSG_ERROR([\'$enable_parallel\' is not a valid parallel search type])
;;
[svn-r1115] Changes since 19990302 ---------------------- ./INSTALL ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Improvements for parallel library. If you have a properly working mpicc you should be able to just say: $ CC=mpicc ./configure and you will see checking for mpirun... /usr/local/mpi/bin/mpirun checking for parallel support files... skipped checking how to run on one processor... /usr/local/mpi/bin/mpirun -np 1 checking how to run in parallel... /usr/local/mpi/bin/mpirun -np $$NPROCS To quote from the INSTALL file.... *** Parallel vs. serial library The HDF5 library can be configured to use MPI and MPI-IO for parallelizm on a distributed multi-processor system. The easy way to do this is to have a properly installed parallel compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that executable as the value of the CC environment variable: [NOTE: mpcc is not tested yet] $ CC=mpcc ./configure $ CC=/usr/local/mpi/bin/mpicc ./configure If no such wrapper script is available then you must specify your normal C compiler along with the distribution of MPI/MPI-IO which is to be used (values other than `mpich' will be added at a later date): $ ./configure --enable-parallel=mpich If the MPI/MPI-IO include files and/or libraries cannot be found by the compiler then their directories must be given as arguments to CPPFLAGS and/or LDFLAGS: $ CPPFLAGS=-I/usr/local/mpi/include \ LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \ ./configure --enable-parallel=mpich If a parallel library is being built then configure attempts to determine how to run a parallel application on one processor and on many processors. If the compiler is mpicc and the user hasn't specified values for RUNSERIAL and RUNPARALLEL then configure chooses `mpirun' from the same directory as `mpicc': RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1 RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2} The `$${NPROCS:=2}' will be substituted with the value of the NPROCS environment variable at the time `make check' is run (or the value 2). ./testpar/Makefile.in Saying `make check' (or `make test') will run the tests on two processors by default. If you define NPROCS then that many processors are used instead: $ NPROCS=4 make check ./configure.in Fixed (hopefully) bugs with detecting whether __attribute__ and __FUNCTION__ are special keywords for the compiler. ./Makefile.in Saying `make install' from the top level directory shows instructions for using shared libraries. ./config/commence.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Moved the @top_srcdir@ into the makefiles because it was expanded too early and had the wrong value. ./INSTALL Added a warning that if the wrong version of hdf4 tools are installed then `make check' will fail in the tools directory.
1999-03-04 07:17:48 +08:00
esac
## ----------------------------------------------------------------------
## Print some other parallel information and do some sanity checks.
## Needs to be done outside of the PARALLEL block since the serial
## build also needs to have values defined.
##
AC_SUBST([ADD_PARALLEL_FILES]) ADD_PARALLEL_FILES="no"
AC_SUBST([MPE]) MPE=no
AC_SUBST([INSTRUMENT_LIBRARY]) INSTRUMENT_LIBRARY=no
AC_SUBST([PARALLEL_FILTERED_WRITES])
AC_SUBST([LARGE_PARALLEL_IO])
if test -n "$PARALLEL"; then
if test "X$HDF5_TESTS" = "Xyes"; then
## The 'testpar' directory should participate in the build
TESTPARALLEL=testpar
fi
[svn-r1115] Changes since 19990302 ---------------------- ./INSTALL ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Improvements for parallel library. If you have a properly working mpicc you should be able to just say: $ CC=mpicc ./configure and you will see checking for mpirun... /usr/local/mpi/bin/mpirun checking for parallel support files... skipped checking how to run on one processor... /usr/local/mpi/bin/mpirun -np 1 checking how to run in parallel... /usr/local/mpi/bin/mpirun -np $$NPROCS To quote from the INSTALL file.... *** Parallel vs. serial library The HDF5 library can be configured to use MPI and MPI-IO for parallelizm on a distributed multi-processor system. The easy way to do this is to have a properly installed parallel compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that executable as the value of the CC environment variable: [NOTE: mpcc is not tested yet] $ CC=mpcc ./configure $ CC=/usr/local/mpi/bin/mpicc ./configure If no such wrapper script is available then you must specify your normal C compiler along with the distribution of MPI/MPI-IO which is to be used (values other than `mpich' will be added at a later date): $ ./configure --enable-parallel=mpich If the MPI/MPI-IO include files and/or libraries cannot be found by the compiler then their directories must be given as arguments to CPPFLAGS and/or LDFLAGS: $ CPPFLAGS=-I/usr/local/mpi/include \ LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \ ./configure --enable-parallel=mpich If a parallel library is being built then configure attempts to determine how to run a parallel application on one processor and on many processors. If the compiler is mpicc and the user hasn't specified values for RUNSERIAL and RUNPARALLEL then configure chooses `mpirun' from the same directory as `mpicc': RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1 RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2} The `$${NPROCS:=2}' will be substituted with the value of the NPROCS environment variable at the time `make check' is run (or the value 2). ./testpar/Makefile.in Saying `make check' (or `make test') will run the tests on two processors by default. If you define NPROCS then that many processors are used instead: $ NPROCS=4 make check ./configure.in Fixed (hopefully) bugs with detecting whether __attribute__ and __FUNCTION__ are special keywords for the compiler. ./Makefile.in Saying `make install' from the top level directory shows instructions for using shared libraries. ./config/commence.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Moved the @top_srcdir@ into the makefiles because it was expanded too early and had the wrong value. ./INSTALL Added a warning that if the wrong version of hdf4 tools are installed then `make check' will fail in the tools directory.
1999-03-04 07:17:48 +08:00
## We are building a parallel library
AC_DEFINE([HAVE_PARALLEL], [1], [Define if we have parallel support])
## Display what we found about running programs
AC_MSG_CHECKING([prefix for running on one processor])
AC_MSG_RESULT([$RUNSERIAL])
AC_MSG_CHECKING([prefix for running in parallel])
AC_MSG_RESULT([$RUNPARALLEL])
## There *must* be some way to run in parallel even if it's just the
## word `none'.
if test -z "$RUNPARALLEL"; then
AC_MSG_ERROR([no way to run a parallel program])
fi
## If RUNSERIAL or RUNPARALLEL is the word `none' then replace it with
## the empty string. This means that no launch commands were requested,
## so we will not use any launch commands.
if test "X$RUNSERIAL" = "Xnone"; then
RUNSERIAL=""
fi
if test "X$RUNPARALLEL" = "Xnone"; then
RUNPARALLEL=""
fi
if test "X$HDF_FORTRAN" = "Xyes"; then
ADD_PARALLEL_FILES="yes"
AC_MSG_CHECKING([for MPI_Comm_c2f and MPI_Comm_f2c functions])
AC_LINK_IFELSE([AC_LANG_PROGRAM([[
#include <mpi.h>
]],
[[MPI_Comm c_comm; MPI_Comm_c2f(c_comm)]])],
[AC_DEFINE([HAVE_MPI_MULTI_LANG_Comm], [1],
[Define if MPI_Comm_c2f and MPI_Comm_f2c exist])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])]
)
AC_MSG_CHECKING([for MPI_Info_c2f and MPI_Info_f2c functions])
AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <mpi.h>]],
[[MPI_Info c_info; MPI_Info_c2f(c_info)]])],
[AC_DEFINE([HAVE_MPI_MULTI_LANG_Info], [1],
[Define if MPI_Info_c2f and MPI_Info_f2c exist])
AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])]
)
fi
## ----------------------------------------------------------------------
## Enable instrumenting of the library's internal operations
## in parallel builds.
##
## Set default
if test "X-$BUILD_MODE" = "X-debug" ; then
INSTRUMENT_LIBRARY=yes
else
INSTRUMENT_LIBRARY=no
fi
AC_MSG_CHECKING([for instrumented library]);
AC_ARG_ENABLE([instrument],
[AS_HELP_STRING([--enable-instrument],
[Enable library instrumentation of optimization
tracing (only used with parallel builds).
[default=yes if a parallel debug build, otherwise no]
])],
[INSTRUMENT_LIBRARY=$enableval])
## Allow this variable to be substituted in
## other files (src/libhdf5.settings.in, etc.)
AC_SUBST([INSTRUMENT_LIBRARY])
case "X-$INSTRUMENT_LIBRARY" in
X-yes)
AC_DEFINE([HAVE_INSTRUMENTED_LIBRARY], [1],
[Define if parallel library will contain instrumentation to detect correct optimization operation])
AC_MSG_RESULT([yes])
;;
X-no)
AC_MSG_RESULT([no])
;;
*)
AC_MSG_ERROR([Unrecognized value: $INSTRUMENT_LIBRARY])
;;
esac
## --------------------------------------------------------------------
## Do we want MPE instrumentation feature on?
##
## This must be done after enable-parallel is checked since it depends
## on a mpich compiler.
##
MPE=yes
AC_ARG_WITH([mpe],
[AS_HELP_STRING([--with-mpe=DIR],
[Use MPE instrumentation [default=no]])],,
[withval=no])
case "X-$withval" in
X-|X-no|X-none)
AC_MSG_CHECKING([for MPE])
AC_MSG_RESULT([suppressed])
unset MPE
;;
X-yes)
AC_CHECK_HEADERS([mpe.h],, [unset MPE])
AC_CHECK_LIB([mpe], [MPE_Init_log],, [unset MPE])
;;
*)
case "$withval" in
*,*)
mpe_inc="`echo $withval | cut -f1 -d,`"
mpe_lib="`echo $withval | cut -f2 -d, -s`"
;;
*)
if test -n "$withval"; then
mpe_inc="$withval/include"
mpe_lib="$withval/lib"
fi
;;
esac
if test -n "$mpe_inc"; then
saved_CPPFLAGS="$CPPFLAGS"
saved_AM_CPPFLAGS="$AM_CPPFLAGS"
CPPFLAGS="$CPPFLAGS -I$mpe_inc"
AM_CPPFLAGS="$AM_CPPFLAGS -I$mpe_inc"
AC_CHECK_HEADERS([mpe.h],, [CPPFLAGS="$saved_CPPFLAGS"; AM_CPPFLAGS="$saved_AM_CPPFLAGS"; unset MPE])
else
AC_CHECK_HEADERS([mpe.h],, [unset MPE])
fi
if test -n "$mpe_lib"; then
saved_LDFLAGS="$LDFLAGS"
saved_AM_LDFLAGS="$AM_LDFLAGS"
LDFLAGS="$LDFLAGS -L$mpe_lib"
AM_LDFLAGS="$AM_LDFLAGS -L$mpe_lib"
AC_CHECK_LIB([mpe], [MPE_Init_log],,
[LDFLAGS="$saved_LDFLAGS"; AM_LDFLAGS="$saved_AM_LDFLAGS"; unset MPE])
else
AC_CHECK_LIB([mpe], [MPE_Init_log],, [unset MPE])
fi
;;
esac
if test "X-$MPE" = "X-yes"; then
AC_DEFINE([HAVE_MPE], [1], [Define if we have MPE support])
fi
## ----------------------------------------------------------------------
## Check for the MPI-3 functions necessary for the Parallel Compression
## feature. If these are not present, issue a warning that Parallel
## Compression will be disabled.
##
AC_MSG_CHECKING([for MPI_Mprobe and MPI_Imrecv functions])
AC_LINK_IFELSE(
[AC_LANG_PROGRAM(
[[
#include <mpi.h>
]],
[[
MPI_Message message;
MPI_Init(0, (void *) 0);
MPI_Mprobe(0, 0, 0, &message, (void *) 0);
MPI_Imrecv((void *) 0, 0, 0, (void *) 0, (void *) 0);
]]
)],
[AC_MSG_RESULT([yes])
PARALLEL_FILTERED_WRITES=yes],
[AC_MSG_RESULT([no])
AC_MSG_WARN([A simple MPI program using the MPI_Mprobe and MPI_Imrecv functions could not be compiled and linked.
Parallel writes of filtered data will be disabled.])
PARALLEL_FILTERED_WRITES=no]
)
## ----------------------------------------------------------------------
## Check for the MPI-3 functions necessary for the big I/O feature.
## If these are not present, issue a warning that the big I/O feature
## will be disabled.
##
AC_MSG_CHECKING([for MPI_Get_elements_x and MPI_Type_size_x functions])
AC_LINK_IFELSE(
[AC_LANG_PROGRAM(
[[
#include <mpi.h>
]],
[[
MPI_Count count;
MPI_Init(0, (void *) 0);
MPI_Get_elements_x(0, 0, &count);
MPI_Type_size_x(0, &count);
]]
)],
[AC_MSG_RESULT([yes])
LARGE_PARALLEL_IO=yes],
[AC_MSG_RESULT([no])
AC_MSG_WARN([A simple MPI program using the MPI_Get_elements_x and MPI_Type_size_x functions could not be compiled and linked.
Reading/Writing >2GB of data in a single parallel I/O operation will be disabled.])
LARGE_PARALLEL_IO=no]
)
fi
2019-08-13 16:36:42 +08:00
## ----------------------------------------------------------------------
## Check if the map API is enabled by --enable-map-api
##
AC_SUBST([MAP_API])
## Default is no map API
MAP_API=no
AC_MSG_CHECKING([if the map API (H5M) is enabled])
AC_ARG_ENABLE([map-api],
[AS_HELP_STRING([--enable-map-api],
[Build the map API (H5M).
This is not yet supported in the native file format
and requires a VOL connector that supports it.
[default=no]])],
[MAP_API=$enableval], [MAP_API=no])
if test "X$MAP_API" = "Xyes"; then
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_MAP_API], [1],
[Define if the map API (H5M) should be compiled])
else
AC_MSG_RESULT([no])
fi
## ----------------------------------------------------------------------
## Check if Direct I/O driver is enabled by --enable-direct-vfd
##
AC_SUBST([DIRECT_VFD])
## Default is no direct VFD
DIRECT_VFD=no
AC_CACHE_VAL([hdf5_cv_direct_io],
AC_CHECK_DECL([O_DIRECT], [hdf5_cv_direct_io=yes], [hdf5_cv_direct_io=no], [[#include <fcntl.h>]]))
AC_CACHE_VAL([hdf5_cv_posix_memalign],
AC_CHECK_FUNC([posix_memalign], [hdf5_cv_posix_memalign=yes], [hdf5_cv_posix_memalign=no]))
AC_MSG_CHECKING([if the direct I/O virtual file driver (VFD) is enabled])
AC_ARG_ENABLE([direct-vfd],
[AS_HELP_STRING([--enable-direct-vfd],
[Build the direct I/O virtual file driver (VFD).
This is based on the POSIX (sec2) VFD and
requires the open() call to take the O_DIRECT
flag. [default=no]])],
[DIRECT_VFD=$enableval], [DIRECT_VFD=no])
if test "X$DIRECT_VFD" = "Xyes"; then
if test ${hdf5_cv_direct_io} = "yes" && test ${hdf5_cv_posix_memalign} = "yes" ; then
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_DIRECT], [1],
[Define if the direct I/O virtual file driver (VFD) should be compiled])
else
AC_MSG_RESULT([no])
DIRECT_VFD=no
AC_MSG_ERROR([The direct VFD was requested but cannot be built. This is either
due to O_DIRECT not being found in fcntl.h or a lack of
posix_memalign() on your system. Please re-configure without
specifying --enable-direct-vfd.])
fi
else
AC_MSG_RESULT([no])
fi
## Direct VFD files are not built if not required.
AM_CONDITIONAL([DIRECT_VFD_CONDITIONAL], [test "X$DIRECT_VFD" = "Xyes"])
## ----------------------------------------------------------------------
## Check if Read-Only S3 virtual file driver is enabled by --enable-ros3-vfd
##
AC_SUBST([ROS3_VFD])
## Default is no Read-Only S3 VFD
ROS3_VFD=no
AC_ARG_ENABLE([ros3-vfd],
[AS_HELP_STRING([--enable-ros3-vfd],
[Build the Read-Only S3 virtual file driver (VFD).
[default=no]])],
[ROS3_VFD=$enableval], [ROS3_VFD=no])
if test "X$ROS3_VFD" = "Xyes"; then
AC_CHECK_HEADERS([curl/curl.h],, [unset ROS3_VFD])
AC_CHECK_HEADERS([openssl/evp.h],, [unset ROS3_VFD])
AC_CHECK_HEADERS([openssl/hmac.h],, [unset ROS3_VFD])
AC_CHECK_HEADERS([openssl/sha.h],, [unset ROS3_VFD])
if test "X$ROS3_VFD" = "Xyes"; then
AC_CHECK_LIB([curl], [curl_global_init],, [unset ROS3_VFD])
AC_CHECK_LIB([crypto], [EVP_sha256],, [unset ROS3_VFD])
fi
AC_MSG_CHECKING([if the Read-Only S3 virtual file driver (VFD) is enabled])
if test "X$ROS3_VFD" = "Xyes"; then
AC_DEFINE([HAVE_ROS3_VFD], [1],
[Define whether the Read-Only S3 virtual file driver (VFD) should be compiled])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
ROS3_VFD=no
AC_MSG_ERROR([The Read-Only S3 VFD was requested but cannot be built.
Please check that openssl and cURL are available on your
system, and/or re-configure without option
--enable-ros3-vfd.])
fi
else
AC_MSG_CHECKING([if the Read-Only S3 virtual file driver (VFD) is enabled])
AC_MSG_RESULT([no])
ROS3_VFD=no
fi
2019-08-20 07:35:55 +08:00
## Read-only S3 files are not built if not required.
AM_CONDITIONAL([ROS3_VFD_CONDITIONAL], [test "X$ROS3_VFD" = "Xyes"])
## ----------------------------------------------------------------------
## Is libhdfs (Hadoop Distributed File System) present?
## It might be specified with the `--with-libhdfs' command-line switch.
## If found, enables the HDFS VFD.
##
AC_SUBST([HAVE_LIBHDFS])
AC_ARG_WITH([libhdfs],
[AS_HELP_STRING([--with-libhdfs=DIR],
[Provide libhdfs library to enable HDFS virtual file driver (VFD) [default=no]])],,
[withval=no])
case $withval in
no)
HAVE_LIBHDFS="no"
AC_MSG_CHECKING([for libhdfs])
AC_MSG_RESULT([suppressed])
;;
*)
HAVE_LIBHDFS="yes"
case "$withval" in
*,*)
libhdfs_inc="`echo $withval |cut -f1 -d,`"
libhdfs_lib="`echo $withval |cut -f2 -d, -s`"
;;
yes)
libhdfs_inc="$HADOOP_HOME/include"
libhdfs_lib="$HADOOP_HOME/lib"
;;
*)
if test -n "$withval"; then
libhdfs_inc="$withval/include"
libhdfs_lib="$withval/lib"
fi
;;
esac
if test -n "$libhdfs_inc"; then
CPPFLAGS="$CPPFLAGS -I$libhdfs_inc"
AM_CPPFLAGS="$AM_CPPFLAGS -I$libhdfs_inc"
fi
AC_CHECK_HEADERS([hdfs.h],,
[unset HAVE_LIBHDFS])
if test "x$HAVE_LIBHDFS" = "xyes"; then
dnl Check for '-ljvm' needed by libhdfs
JNI_LDFLAGS=""
if test $JAVA_HOME != ""
then
JNI_LDFLAGS="-L$JAVA_HOME/jre/lib/$OS_ARCH -L$JAVA_HOME/jre/lib/$OS_ARCH/server"
fi
ldflags_bak=$LDFLAGS
LDFLAGS="$LDFLAGS $JNI_LDFLAGS"
AC_CHECK_LIB([jvm], [JNI_GetCreatedJavaVMs])
LDFLAGS=$ldflags_bak
AC_SUBST([JNI_LDFLAGS])
if test -n "$libhdfs_lib"; then
## Hadoop distribution hides libraries down one level in 'lib/native'
libhdfs_lib="$libhdfs_lib/native"
LDFLAGS="$LDFLAGS -L$libhdfs_lib $JNI_LDFLAGS"
AM_LDFLAGS="$AM_LDFLAGS -L$libhdfs_lib $JNI_LDFLAGS"
fi
AC_CHECK_LIB([hdfs], [hdfsConnect],,
[unset HAVE_LIBHDFS])
fi
if test -z "$HAVE_LIBHDFS"; then
AC_MSG_ERROR([Set to use libhdfs library, but could not find or use
libhdfs. Please verify that the path to HADOOP_HOME is
valid, and/or reconfigure without --with-libhdfs.])
fi
;;
esac
if test "x$HAVE_LIBHDFS" = "xyes"; then
AC_DEFINE([HAVE_LIBHDFS], [1],
[Proceed to build with libhdfs])
fi
## Checkpoint the cache
AC_CACHE_SAVE
## ----------------------------------------------------------------------
## Use custom examples path.
##
AC_MSG_CHECKING([for custom examples path definition])
AC_ARG_WITH([examplesdir],
[AS_HELP_STRING([--with-examplesdir=location],
[Specify path for examples
[default="DATAROOTDIR/hdf5_examples"]])],,
withval="${datarootdir}/hdf5_examples")
if test "X$withval" = "X"; then
AC_MSG_RESULT([default])
examplesdir="${datarootdir}/hdf5_examples"
else
AC_MSG_RESULT([$withval])
examplesdir=$withval
fi
AC_SUBST([examplesdir])
AC_DEFINE_UNQUOTED([EXAMPLESDIR], ["$examplesdir"],
[Define the examples directory])
## ----------------------------------------------------------------------
## Enable custom plugin default path for library. It requires SHARED support.
##
AC_MSG_CHECKING([for custom plugin default path definition])
AC_ARG_WITH([default-plugindir],
[AS_HELP_STRING([--with-default-plugindir=location],
[Specify default location for plugins
[default="/usr/local/hdf5/lib/plugin"]])],,
withval="/usr/local/hdf5/lib/plugin")
if test "X$withval" = "X"; then
AC_MSG_RESULT([default])
default_plugindir="/usr/local/hdf5/lib/plugin"
else
AC_MSG_RESULT([$withval])
default_plugindir=$withval
fi
AC_DEFINE_UNQUOTED([DEFAULT_PLUGINDIR], ["$default_plugindir"],
[Define the default plugins path to compile])
## ----------------------------------------------------------------------
## Decide whether the presence of user's exception handling functions is
## checked and data conversion exceptions are returned. This is mainly
## for the speed optimization of hard conversions. Soft conversions can
## actually benefit little.
##
AC_MSG_CHECKING([whether exception handling functions is checked during data conversions])
AC_ARG_ENABLE([dconv-exception],
[AS_HELP_STRING([--enable-dconv-exception],
[if exception handling functions is checked during
data conversions [default=yes]])],
[DCONV_EXCEPTION=$enableval], [DCONV_EXCEPTION=yes])
if test "$DCONV_EXCEPTION" = "yes"; then
AC_MSG_RESULT([yes])
AC_DEFINE([WANT_DCONV_EXCEPTION], [1],
[Check exception handling functions during data conversions])
else
AC_MSG_RESULT([no])
fi
## ----------------------------------------------------------------------
## Decide whether the data accuracy has higher priority during data
## conversions. If not, some hard conversions will still be prefered even
## though the data may be wrong (for example, some compilers don't
## support denormalized floating values) to maximize speed.
##
AC_MSG_CHECKING([whether data accuracy is guaranteed during data conversions])
AC_ARG_ENABLE([dconv-accuracy],
[AS_HELP_STRING([--enable-dconv-accuracy],
[if data accuracy is guaranteed during
data conversions [default=yes]])],
[DATA_ACCURACY=$enableval], [DATA_ACCURACY=yes])
if test "$DATA_ACCURACY" = "yes"; then
AC_MSG_RESULT([yes])
AC_DEFINE([WANT_DATA_ACCURACY], [1],
[Data accuracy is prefered to speed during data conversions])
else
AC_MSG_RESULT([no])
fi
## ----------------------------------------------------------------------
## Set the flag to indicate that the machine has window style pathname,
## that is, "drive-letter:\" (e.g. "C:") or "drive-letter:/" (e.g. "C:/").
## (This flag should be _unset_ for all machines, except for Windows, where
## it's set in the custom Windows H5pubconf.h file)
##
AC_MSG_CHECKING([if the machine has window style path name])
case "`uname`" in
MINGW*)
AC_DEFINE([HAVE_WINDOW_PATH], [1],
[Define if your system has window style path name.])
AC_MSG_RESULT([yes])
;;
*)
AC_MSG_RESULT([no])
;;
esac
## ----------------------------------------------------------------------
## Set the flag to indicate that the machine is using a special algorithm to convert
## 'long double' to '(unsigned) long' values. (This flag should only be set for
## the IBM Power6 Linux. When the bit sequence of long double is
## 0x4351ccf385ebc8a0bfcc2a3c3d855620, the converted value of (unsigned)long
## is 0x004733ce17af227f, not the same as the library's conversion to 0x004733ce17af2282.
## The machine's conversion gets the correct value. We define the macro and disable
## this kind of test until we figure out what algorithm they use.
##
AC_MSG_CHECKING([if using special algorithm to convert long double to (unsigned) long values])
## NOTE: Place all configure test programs into cmake's source file, then use a preprocessor directive
## to select the proper test program. This is done by echoing the #define and cat'ing the cmake
## source file. (HDFFV-9467)
TEST_SRC="`(echo \"#define H5_LDOUBLE_TO_LONG_SPECIAL_TEST 1\"; cat $srcdir/config/cmake/ConversionTests.c)`"
if test ${ac_cv_sizeof_long_double} = 0; then
hdf5_cv_ldouble_to_long_special=${hdf5_cv_ldouble_to_long_special=no}
else
AC_CACHE_VAL([hdf5_cv_ldouble_to_long_special],
[AC_RUN_IFELSE(
[AC_LANG_SOURCE([$TEST_SRC])]
, [hdf5_cv_ldouble_to_long_special=yes], [hdf5_cv_ldouble_to_long_special=no],)])
fi
if test ${hdf5_cv_ldouble_to_long_special} = "yes"; then
AC_DEFINE([LDOUBLE_TO_LONG_SPECIAL], [1],
[Define if your system converts long double to (unsigned) long values with special algorithm.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
## ----------------------------------------------------------------------
## Set the flag to indicate that the machine is using a special algorithm
## to convert some values of '(unsigned) long' to 'long double' values.
## (This flag should be off for all machines, except for IBM Power6 Linux,
## when the bit sequences are 003fff..., 007fff..., 00ffff..., 01ffff...,
## ..., 7fffff..., the compiler uses a unknown algorithm. We define a
## macro and skip the test for now until we know about the algorithm.
##
AC_MSG_CHECKING([if using special algorithm to convert (unsigned) long to long double values])
TEST_SRC="`(echo \"#define H5_LONG_TO_LDOUBLE_SPECIAL_TEST 1\"; cat $srcdir/config/cmake/ConversionTests.c)`"
if test ${ac_cv_sizeof_long_double} = 0; then
hdf5_cv_long_to_ldouble_special=${hdf5_cv_long_to_ldouble_special=no}
else
AC_CACHE_VAL([hdf5_cv_long_to_ldouble_special],
[AC_RUN_IFELSE(
[AC_LANG_SOURCE([$TEST_SRC])]
, [hdf5_cv_long_to_ldouble_special=yes], [hdf5_cv_long_to_ldouble_special=no],)])
fi
if test ${hdf5_cv_long_to_ldouble_special} = "yes"; then
AC_DEFINE([LONG_TO_LDOUBLE_SPECIAL], [1],
[Define if your system can convert (unsigned) long to long double values with special algorithm.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
## ----------------------------------------------------------------------
## Set the flag to indicate that the machine can accurately convert
## 'long double' to '(unsigned) long long' values. (This flag should
## be set for all machines, except for Mac OS 10.4, SGI IRIX64 6.5 and
## Powerpc Linux using XL compilers.
## When the bit sequence of long double is 0x4351ccf385ebc8a0bfcc2a3c...,
## the values of (unsigned)long long start to go wrong on these
## two machines. Adjusting it higher to 0x4351ccf385ebc8a0dfcc... or
## 0x4351ccf385ebc8a0ffcc... will make the converted values wildly wrong.
## This test detects this wrong behavior and disable the test.
##
AC_MSG_CHECKING([if correctly converting long double to (unsigned) long long values])
TEST_SRC="`(echo \"#define H5_LDOUBLE_TO_LLONG_ACCURATE_TEST 1\"; cat $srcdir/config/cmake/ConversionTests.c)`"
if test ${ac_cv_sizeof_long_double} = 0; then
hdf5_cv_ldouble_to_llong_accurate=${hdf5_cv_ldouble_to_llong_accurate=no}
else
AC_CACHE_VAL([hdf5_cv_ldouble_to_llong_accurate],
[AC_RUN_IFELSE([AC_LANG_SOURCE([$TEST_SRC])],
[hdf5_cv_ldouble_to_llong_accurate=yes], [hdf5_cv_ldouble_to_llong_accurate=no],[])])
fi
if test ${hdf5_cv_ldouble_to_llong_accurate} = "yes"; then
AC_DEFINE([LDOUBLE_TO_LLONG_ACCURATE], [1],
[Define if your system can convert long double to (unsigned) long long values correctly.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
## ----------------------------------------------------------------------
## Set the flag to indicate that the machine can accurately convert
## '(unsigned) long long' to 'long double' values. (This flag should be
## set for all machines, except for Mac OS 10.4 and Powerpc Linux using
## XL compilers.
## When the bit sequences are 003fff..., 007fff..., 00ffff..., 01ffff...,
## ..., 7fffff..., the converted values are twice as big as they should be.
##
AC_MSG_CHECKING([if correctly converting (unsigned) long long to long double values])
TEST_SRC="`(echo \"#define H5_LLONG_TO_LDOUBLE_CORRECT_TEST 1\"; cat $srcdir/config/cmake/ConversionTests.c)`"
if test ${ac_cv_sizeof_long_double} = 0; then
hdf5_cv_llong_to_ldouble_correct=${hdf5_cv_llong_to_ldouble_correct=no}
else
AC_CACHE_VAL([hdf5_cv_llong_to_ldouble_correct],
[AC_RUN_IFELSE([AC_LANG_SOURCE([$TEST_SRC])],
[hdf5_cv_llong_to_ldouble_correct=yes], [hdf5_cv_llong_to_ldouble_correct=no],[])])
fi
if test ${hdf5_cv_llong_to_ldouble_correct} = "yes"; then
AC_DEFINE([LLONG_TO_LDOUBLE_CORRECT], [1],
[Define if your system can convert (unsigned) long long to long double values correctly.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
## ----------------------------------------------------------------------
## Set the flag to indicate that the machine is IBM ppc64le and cannot
## accurately convert some long double values.
##
AC_MSG_CHECKING([if the system is IBM ppc64le and cannot correctly convert some long double values])
TEST_SRC="`(echo \"#define H5_DISABLE_SOME_LDOUBLE_CONV_TEST 1\"; cat $srcdir/config/cmake/ConversionTests.c)`"
if test ${ac_cv_sizeof_long_double} = 0; then
hdf5_cv_disable_some_ldouble_conv=${hdf5_cv_disable_some_ldouble_conv=no}
else
AC_CACHE_VAL([hdf5_cv_disable_some_ldouble_conv],
[AC_RUN_IFELSE([AC_LANG_SOURCE([$TEST_SRC])],
[hdf5_cv_disable_some_ldouble_conv=yes], [hdf5_cv_disable_some_ldouble_conv=no],[])])
fi
if test ${hdf5_cv_disable_some_ldouble_conv} = "yes"; then
AC_DEFINE([DISABLE_SOME_LDOUBLE_CONV], [1],
[Define if your system is IBM ppc64le and cannot convert some long double values correctly.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
## ----------------------------------------------------------------------
## Set some variables for general configuration information to be saved
## and installed with the libraries (used to generate libhdf5.settings).
##
## HDF5 version from the first line of the README.txt file.
H5_VERSION="`cut -d' ' -f3 $srcdir/README.txt | head -1`"
AC_SUBST([H5_VERSION])
## Configuration date
AC_SUBST([CONFIG_DATE]) CONFIG_DATE="`date`"
## User doing the configuration
AC_SUBST([CONFIG_USER]) CONFIG_USER="`whoami`@`hostname`"
if test -n "$ORGANIZATION"; then
CONFIG_USER="$CONFIG_USER at $ORGANIZATION"
fi
## Configuration mode (production, debug, etc.) saved above.
AC_SUBST([CONFIG_MODE])
## Byte sex from the AC_C_BIGENDIAN macro.
AC_SUBST([BYTESEX])
if test "X$ac_cv_c_bigendian" = "Xyes"; then
BYTESEX="big-endian"
2000-04-07 23:25:41 +08:00
else
BYTESEX="little-endian"
fi
if test "X$ac_cv_c_bigendian" = "Xyes"; then
WORDS_BIGENDIAN="yes"
else
WORDS_BIGENDIAN="no"
fi
AC_SUBST([WORDS_BIGENDIAN])
## Parallel support? (set above except empty if none)
PARALLEL=${PARALLEL:-no}
## Parallel writes to filtered datasets support?
PARALLEL_FILTERED_WRITES=${PARALLEL_FILTERED_WRITES:-no}
## >2GB writes in parallel support?
LARGE_PARALLEL_IO=${LARGE_PARALLEL_IO:-no}
## Compiler with version information. This consists of the full path
## name of the compiler and the reported version number.
AC_SUBST([CC_VERSION])
## Strip anything that looks like a flag off of $CC
CC_NOFLAGS=`echo $CC | sed 's/ -.*//'`
if `echo $CC_NOFLAGS | grep ^/ >/dev/null 2>&1`; then
CC_VERSION="$CC"
else
CC_VERSION="$CC";
for x in `echo $PATH | sed -e 's/:/ /g'`; do
if test -x $x/$CC_NOFLAGS; then
CC_VERSION="$x/$CC"
break
fi
done
fi
if test -n "$cc_version_info"; then
CC_VERSION="$CC_VERSION ( $cc_version_info)"
fi
AC_SUBST([FC_VERSION])
## Strip anything that looks like a flag off of $FC
FC_NOFLAGS=`echo $FC | sed 's/ -.*//'`
if `echo $FC_NOFLAGS | grep ^/ >/dev/null 2>&1`; then
FC_VERSION="$FC"
else
FC_VERSION="$FC";
for x in `echo $PATH | sed -e 's/:/ /g'`; do
if test -x $x/$FC_NOFLAGS; then
FC_VERSION="$x/$FC"
break
fi
done
fi
if test -n "$fc_version_info"; then
FC_VERSION="$FC_VERSION ( $fc_version_info)"
fi
AC_SUBST([CXX_VERSION])
## Strip anything that looks like a flag off of $CXX
CXX_NOFLAGS=`echo $CXX | sed 's/ -.*//'`
if `echo $CXX_NOFLAGS | grep ^/ >/dev/null 2>&1`; then
CXX_VERSION="$CXX"
else
CXX_VERSION="$CXX";
for x in `echo $PATH | sed -e 's/:/ /g'`; do
if test -x $x/$CXX_NOFLAGS; then
CXX_VERSION="$x/$CXX"
break
fi
done
fi
if test -n "$cxx_version_info"; then
CXX_VERSION="$CXX_VERSION ( $cxx_version_info)"
fi
AC_SUBST([JAVA_VERSION])
## Strip anything that looks like a flag off of $JAVA
JAVA_NOFLAGS=`echo $JAVA | sed 's/ -.*//'`
if `echo $JAVA_NOFLAGS | grep ^/ >/dev/null 2>&1`; then
JAVA_VERSION="$JAVA"
else
JAVA_VERSION="$JAVA";
for x in `echo $PATH | sed -e 's/:/ /g'`; do
if test -x $x/$JAVA_NOFLAGS; then
JAVA_VERSION="$x/$JAVA"
break
fi
done
fi
java_version_info=`$JAVA -version 2>&1 |\
grep 'version' | sed -e 's/version "//' | sed -e 's/"//'`
if test -n "$java_version_info"; then
JAVA_VERSION="$JAVA_VERSION ($java_version_info)"
fi
## ----------------------------------------------------------------------
## Where is the root of the source tree. Give an absolute address so
## we can find it no matter which directory of the distribution is our
## current directory. The built-in pwd fails on some systems, but the
## /bin/pwd version works OK.
##
if test -x /bin/pwd; then
pwd=/bin/pwd
else
pwd=pwd
fi
AC_SUBST([ROOT]) ROOT="`$pwd`"
## ----------------------------------------------------------------------
## Some programs shouldn't be built by default (e.g., programs to generate
## data files used by tests, some optional tests).
## Check if they want such programs built anyway.
##
AC_MSG_CHECKING([additional programs should be built])
AC_ARG_ENABLE([build-all],
[AS_HELP_STRING([--enable-build-all],
[Build helper programs that only developers should need [default=no]])],
[BUILD_ALL=$enableval],
[BUILD_ALL=no])
if test "X$BUILD_ALL" = "Xyes"; then
echo "yes"
else
echo "no"
fi
AM_CONDITIONAL([BUILD_ALL_CONDITIONAL], [test "X$BUILD_ALL" = "Xyes"])
## ----------------------------------------------------------------------
## Enable deprecated public API symbols
##
## Enabled unless the build mode is clean.
if test "X-$BUILD_MODE" = "X-clean" ; then
DEPREC_SYMBOLS=no
else
DEPREC_SYMBOLS=yes
fi
AC_SUBST([DEPRECATED_SYMBOLS])
AC_MSG_CHECKING([if deprecated public symbols are available]);
AC_ARG_ENABLE([deprecated-symbols],
[AS_HELP_STRING([--enable-deprecated-symbols],
[Enable deprecated public API symbols.
[default=yes (unless build mode = clean)]
])],
[DEPREC_SYMBOLS=$enableval])
case "X-$DEPREC_SYMBOLS" in
X-yes)
AC_MSG_RESULT([yes])
DEPRECATED_SYMBOLS=yes
;;
X-no|*)
AC_MSG_RESULT([no])
DEPRECATED_SYMBOLS=no
AC_DEFINE([NO_DEPRECATED_SYMBOLS], [1],
[Define if deprecated public API symbols are disabled])
;;
esac
## --------------------------------------------------------------------------
## Which version of the public APIs should the 'base' versioned symbols use?
##
AC_SUBST([DEFAULT_API_VERSION])
AC_MSG_CHECKING([which version of public symbols to use by default])
AC_ARG_WITH([default-api-version],
[AS_HELP_STRING([--with-default-api-version=(v16|v18|v110|v112|v114)],
[Specify default release version of public symbols
[default=v114]])],,
[withval=v114])
if test "X$withval" = "Xv16"; then
AC_MSG_RESULT([v16])
DEFAULT_API_VERSION=v16
AC_DEFINE([USE_16_API_DEFAULT], [1],
[Define using v1.6 public API symbols by default])
elif test "X$withval" = "Xv18"; then
AC_MSG_RESULT([v18])
DEFAULT_API_VERSION=v18
AC_DEFINE([USE_18_API_DEFAULT], [1],
[Define using v1.8 public API symbols by default])
elif test "X$withval" = "Xv110"; then
AC_MSG_RESULT([v110])
DEFAULT_API_VERSION=v110
AC_DEFINE([USE_110_API_DEFAULT], [1],
[Define using v1.10 public API symbols by default])
elif test "X$withval" = "Xv112"; then
AC_MSG_RESULT([v112])
DEFAULT_API_VERSION=v112
AC_DEFINE([USE_112_API_DEFAULT], [1],
[Define using v1.12 public API symbols by default])
elif test "X$withval" = "Xv114"; then
AC_MSG_RESULT([v114])
DEFAULT_API_VERSION=v114
AC_DEFINE([USE_114_API_DEFAULT], [1],
[Define using v1.14 public API symbols by default])
else
AC_MSG_ERROR([invalid version of public symbols given])
fi
## It's an error to try to disable deprecated public API symbols while
## choosing an older version of the public API as the default. However,
## if the user insists on doing this via the --enable-unsupported configure
## flag, we'll let them.
if test "X${ALLOW_UNSUPPORTED}" != "Xyes"; then
if test "X${DEFAULT_API_VERSION}" != "Xv114" -a "X${DEPRECATED_SYMBOLS}" = "Xno" ; then
AC_MSG_ERROR([Removing old public API symbols not allowed when using them as default public API symbols. Use --enable-unsupported to override this error.])
fi
fi
## ----------------------------------------------------------------------
## Enable strict file format checks
##
AC_SUBST([STRICT_FORMAT_CHECKS])
AC_MSG_CHECKING([whether to perform strict file format checks]);
AC_ARG_ENABLE([strict-format-checks],
[AS_HELP_STRING([--enable-strict-format-checks],
[Enable strict file format checks.
[default=yes if debug build, otherwise no]
])],
[STRICT_FORMAT_CHECKS=$enableval])
## Set the default level. This depends on the compiler mode.
if test "X-$STRICT_FORMAT_CHECKS" = X- ; then
if test "X-$BUILD_MODE" = "X-debug" ; then
STRICT_FORMAT_CHECKS=yes
else
STRICT_FORMAT_CHECKS=no
fi
fi
case "X-$STRICT_FORMAT_CHECKS" in
X-yes)
AC_MSG_RESULT([yes])
AC_DEFINE([STRICT_FORMAT_CHECKS], [1],
[Define if strict file format checks are enabled])
;;
X-no)
AC_MSG_RESULT([no])
;;
*)
AC_MSG_ERROR([Unrecognized value: $STRICT_FORMAT_CHECKS])
;;
esac
## ----------------------------------------------------------------------
## Enable use of pread/pwrite instead of read/write in certain VFDs.
##
AC_SUBST([PREADWRITE])
## Check these first to avoid interspersed output in the AC_ARG_ENABLE line
## below. (Probably overkill to check for both, but we'll be extra careful)
PREADWRITE_HAVE_BOTH=yes
AC_CHECK_FUNC([pread], [], [PREADWRITE_HAVE_BOTH=no])
AC_CHECK_FUNC([pwrite], [], [PREADWRITE_HAVE_BOTH=no])
AC_MSG_CHECKING([whether to use pread/pwrite instead of read/write in certain VFDs])
AC_ARG_ENABLE([preadwrite],
[AS_HELP_STRING([--enable-preadwrite],
[Enable using pread/pwrite instead of read/write in sec2/log/core VFDs.
[default=yes if pread/pwrite are present]])],
[PREADWRITE=$enableval])
## Set the default level.
if test "X-$PREADWRITE" = X- ; then
PREADWRITE=yes
fi
case "X-$PREADWRITE" in
X-yes)
if test "X-$PREADWRITE_HAVE_BOTH" = "X-yes"; then
AC_DEFINE([HAVE_PREADWRITE], [1], [Define if both pread and pwrite exist.])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
;;
X-no)
AC_MSG_RESULT([no])
;;
*)
AC_MSG_ERROR([Unrecognized value: $PREADWRITE])
;;
esac
## ----------------------------------------------------------------------
## Enable embedded library information
##
AC_MSG_CHECKING([whether to have library information embedded in the executables])
AC_ARG_ENABLE([embedded-libinfo],
[AS_HELP_STRING([--enable-embedded-libinfo],
[Enable embedded library information [default=yes]])],
[enable_embedded_libinfo=$enableval],
[enable_embedded_libinfo=yes])
if test "${enable_embedded_libinfo}" = "yes"; then
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_EMBEDDED_LIBINFO], [1],
[Define if library information should be embedded in the executables])
else
AC_MSG_RESULT([no])
fi
## ----------------------------------------------------------------------
## Check if pointer alignments are enforced
##
AC_MSG_CHECKING([if alignment restrictions are strictly enforced])
TEST_SRC="`(echo \"#define H5_NO_ALIGNMENT_RESTRICTIONS_TEST 1\"; cat $srcdir/config/cmake/ConversionTests.c)`"
AC_RUN_IFELSE([
AC_LANG_SOURCE([$TEST_SRC])
], [
AC_DEFINE([NO_ALIGNMENT_RESTRICTIONS], [1], [Define if we can violate pointer alignment restrictions])
AC_MSG_RESULT([no])
], [
AC_MSG_RESULT([yes])
], [
AC_MSG_RESULT([unknown, assuming yes])
])
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
## ----------------------------------------------------------------------
## Restore user's CFLAGS.
CFLAGS="$saved_user_CFLAGS"
FCFLAGS="$saved_user_FCFLAGS"
CXXFLAGS="$saved_user_CXXFLAGS"
CPPFLAGS="$saved_user_CPPFLAGS"
JAVACFLAGS="$saved_user_JAVACFLAGS"
JAVAFLAGS="$saved_user_JAVAFLAGS"
LDFLAGS="$saved_user_LDFLAGS"
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
## ----------------------------------------------------------------------
## Create automake conditionals to tell automake makefiles which directories
## need to be compiled
AM_CONDITIONAL([BUILD_CXX_CONDITIONAL], [test "X$HDF_CXX" = "Xyes"])
AM_CONDITIONAL([BUILD_PARALLEL_CONDITIONAL], [test "X$PARALLEL" = "Xyes"])
AM_CONDITIONAL([BUILD_FORTRAN_CONDITIONAL], [test "X$HDF_FORTRAN" = "Xyes"])
AM_CONDITIONAL([BUILD_JAVA_CONDITIONAL], [test "X$HDF_JAVA" = "Xyes"])
AM_CONDITIONAL([BUILD_HDF5_HL_CONDITIONAL], [test "X$HDF5_HL" = "Xyes"])
AM_CONDITIONAL([BUILD_TESTS_CONDITIONAL], [test "X$HDF5_TESTS" = "Xyes"])
AM_CONDITIONAL([BUILD_TESTS_PARALLEL_CONDITIONAL], [test -n "$TESTPARALLEL"])
AM_CONDITIONAL([BUILD_TOOLS_CONDITIONAL], [test "X$HDF5_TOOLS" = "Xyes"])
## ----------------------------------------------------------------------
## Build the Makefiles.
##
## The directory search list
AC_SUBST([SEARCH]) SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src'
export SEARCH
## Some cleanup stuff
rm -f conftest conftest.o conftest.c dummy.o *.mod
1997-08-29 00:36:57 +08:00
## Build config.status, touch the stamp files, and build all the Makefiles.
## The order is such that the first `make' does not need to update any
## configuration information. See config/commence.in for the order in which
## things need to be done.
## First the stamp1 file for H5config.h.in
mkdir ./config >/dev/null 2>&1
touch ./config/stamp1
## Then the config.status file (but not makefiles)
saved_no_create=$no_create
[svn-r1151] Changes since 19990318 ---------------------- ./Makefile.in ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./config/commence.in ./config/conclude.in ./config/dec-osf4.x ./config/depend.in ./config/freebsd ./config/linux-gnu ./config/linux-gnulibc1 ./config/linux-gnulibc2 ./config/solaris2.x ./examples/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./tools/testh5dump.sh Changes that allow hdf5 to be configured and compiled in a directory other than the source directory. This is especially useful if you want to concurrently compile with different compilers and/or compile flags, or if the hdf5 source is on read-only media like a CDROM. The changes were surprisingly easy ;-) Here's what you can do now... $ mkdir /tmp/build1 # or something $ cd /tmp/build1 $ /cdrom/hdf5/configure # where ever the source is $ make Paul, you'll have to change the testh5toh4 script similar to the way I changed testh5dump.sh. I started working on it but then gave up because of a number of problems: (1) I had to comment out all the tests that let h5toh4 choose the output file name because it always tried to put the output file in the same directory as the input file, (2) if path names are used during the h4 dump then they interfere with the diff. The test works fine when run in the source directory, but try this instead: $ gunzip <hdf5-1.1.67.tar.gz |tar xf - $ chmod -R ugo-w hdf5-1.1.67 $ mkdir build $ cd build $ ../hdf5-1.1.67/configure $ make check Dan, I didn't modify the pablo/Makefile.in because I have no way to test it. I think all you need to do is add a couple lines before the @COMMENCE@ line and add a couple search directories for header files. Anyway, it seems like almost an exact duplicate of the src/Makefile.in, so it shouldn't be a problem... ./Makefile.in Removes a few more temporary files during make clean and distclean. ./configure.in I fixed the creation of the time-stamp files so that the initial make doesn't have to regenerated all the makefiles (only GNU make users will see any change). ./src/H5R.c Changed a return type from `intn' to `int' for an API function. ./src/H5detect.c Added the volatile qualifier to a couple more variables. ./tools/h5tools.c Fixed a compiler warning about an unused local. ./tools/h5toh4.c Initialized `optind' to 1 because it's zero on my system. It should always be one on a unix system. ./tools/testh5toh4 Redirected "broken pipe" messages to /dev/null so outut is formatted correctly.
1999-03-20 04:09:50 +08:00
no_create=yes
PARALLEL_MAKE=""
FORTRAN_PARALLEL_MAKE=""
if test -n "$TESTPARALLEL"; then
PARALLEL_MAKE="$TESTPARALLEL/Makefile"
if test "X$HDF_FORTRAN" = "Xyes"; then
FORTRAN_PARALLEL_MAKE=fortran/$TESTPARALLEL/Makefile
fi
fi
LT_OUTPUT
no_create=$saved_no_create
## Then the stamp2 file for H5config.h
touch ./config/stamp2
## Finally the makefiles
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
## Are we compiling static libraries, shared libraries, or both? This
## is only used for the libhdf5.settings file. We can't just look at
## $enable_static and $enable_shared because if they're yes the ltconfig
## might have decided that one or the other is simply not possible.
## Therefore we have to ask the generated `libtool' shell script
## which 'features' it has enabled.
if (./libtool --features | grep '^enable shared libraries' > /dev/null); then
enable_shared=yes
else
enable_shared=no
fi
if (./libtool --features | grep '^enable static libraries' > /dev/null); then
enable_static=yes
else
enable_static=no
fi
## Expose things for *.in markup
AC_SUBST([STATIC_SHARED])
AC_SUBST([enable_shared])
AC_SUBST([enable_static])
if test "X$enable_static" = "Xyes" && test "X$enable_shared" = "Xyes"; then
STATIC_SHARED="static, shared"
elif test "X$enable_static" = "Xyes"; then
STATIC_SHARED="static"
elif test "X$enable_shared" = "Xyes"; then
STATIC_SHARED="shared"
else
STATIC_SHARED="none"
fi
if test "X$HDF_FORTRAN" = "Xyes"; then
2017-09-21 03:38:00 +08:00
### libtool does not pass the correct argument linking (-Wl,-Wl,,) for the NAG Fortran compiler
### on Linux (other OSs have not been tested).
### Therefore, detect if we are using the NAG Fortran compiler, and replace the wl="-Wl," for Fortran to
2017-08-03 22:20:05 +08:00
### wl="-Wl,-Wl,," in the libtool file. (HDFFV-10037)
case "`uname`" in
Linux*)
fortran_linux_linker_option="-Wl,"
if test "X$FC_BASENAME" = "Xnagfor"; then
fortran_linux_linker_option="-Wl,-Wl,,"
fi
## Set the correct linker option for use in h5fc.in markup
AC_SUBST([fortran_linux_linker_option])
;;
esac
fi
## ----------------------------------------------------------------------
## Set a macro if shared library is enabled.
##
AM_CONDITIONAL([HAVE_SHARED_CONDITIONAL], [test "X$enable_shared" = "Xyes"])
AC_CONFIG_FILES([src/libhdf5.settings
Makefile
src/Makefile
test/Makefile
test/H5srcdir_str.h
test/testabort_fail.sh
test/testcheck_version.sh
test/testerror.sh
test/testexternal_env.sh
2017-01-19 01:10:56 +08:00
test/testflushrefresh.sh
test/testlibinfo.sh
test/testlinks_env.sh
test/testswmr.sh
test/testvds_env.sh
test/testvdsswmr.sh
test/test_filter_plugin.sh
test/test_usecases.sh
test/test_vol_plugin.sh
testpar/Makefile
testpar/testpflush.sh
tools/Makefile
tools/lib/Makefile
tools/libtest/Makefile
tools/src/Makefile
tools/src/h5dump/Makefile
tools/src/h5import/Makefile
tools/src/h5diff/Makefile
tools/src/h5jam/Makefile
tools/src/h5repack/Makefile
tools/src/h5ls/Makefile
tools/src/h5copy/Makefile
tools/src/misc/Makefile
tools/src/h5stat/Makefile
tools/test/Makefile
tools/test/h5dump/Makefile
tools/test/h5dump/h5dump_plugin.sh
tools/test/h5dump/testh5dump.sh
tools/test/h5dump/testh5dumppbits.sh
tools/test/h5dump/testh5dumpvds.sh
tools/test/h5dump/testh5dumpxml.sh
tools/test/h5ls/Makefile
tools/test/h5ls/h5ls_plugin.sh
tools/test/h5ls/testh5ls.sh
tools/test/h5ls/testh5lsvds.sh
tools/test/h5import/Makefile
tools/test/h5import/h5importtestutil.sh
tools/test/h5diff/Makefile
tools/test/h5diff/h5diff_plugin.sh
tools/test/h5diff/testh5diff.sh
tools/test/h5diff/testph5diff.sh
tools/src/h5format_convert/Makefile
tools/test/h5format_convert/Makefile
tools/test/h5format_convert/testh5fc.sh
tools/test/h5jam/Makefile
tools/test/h5jam/testh5jam.sh
tools/test/h5repack/Makefile
tools/test/h5repack/h5repack.sh
tools/test/h5repack/h5repack_plugin.sh
tools/test/h5copy/Makefile
tools/test/h5copy/testh5copy.sh
tools/test/misc/Makefile
2017-01-19 01:10:56 +08:00
tools/test/misc/testh5clear.sh
tools/test/misc/testh5mkgrp.sh
tools/test/misc/testh5repart.sh
tools/test/misc/vds/Makefile
tools/test/h5stat/Makefile
tools/test/h5stat/testh5stat.sh
tools/test/perform/Makefile
examples/Makefile
examples/run-c-ex.sh
examples/testh5cc.sh
bin/h5cc
bin/Makefile
c++/Makefile
c++/src/Makefile
c++/src/h5c++
c++/test/Makefile
c++/test/H5srcdir_str.h
c++/examples/Makefile
c++/examples/run-c++-ex.sh
c++/examples/testh5c++.sh
fortran/Makefile
fortran/src/h5fc
fortran/src/Makefile
fortran/src/H5fort_type_defines.h
fortran/test/Makefile
fortran/testpar/Makefile
fortran/examples/Makefile
fortran/examples/run-fortran-ex.sh
fortran/examples/testh5fc.sh
java/Makefile
java/src/Makefile
java/src/jni/Makefile
java/test/Makefile
java/test/junit.sh
java/examples/Makefile
java/examples/intro/Makefile
2017-09-21 03:39:08 +08:00
java/examples/intro/JavaIntroExample.sh
java/examples/datasets/Makefile
2017-09-21 03:39:08 +08:00
java/examples/datasets/JavaDatasetExample.sh
java/examples/datatypes/Makefile
2017-09-21 03:39:08 +08:00
java/examples/datatypes/JavaDatatypeExample.sh
java/examples/groups/Makefile
2017-09-21 03:39:08 +08:00
java/examples/groups/JavaGroupExample.sh
hl/Makefile
hl/src/Makefile
hl/test/Makefile
hl/test/H5srcdir_str.h
hl/tools/Makefile
hl/tools/gif2h5/Makefile
hl/tools/gif2h5/h52giftest.sh
2017-01-19 01:10:56 +08:00
hl/tools/h5watch/Makefile
hl/tools/h5watch/testh5watch.sh
hl/examples/Makefile
hl/examples/run-hlc-ex.sh
hl/c++/Makefile
hl/c++/src/Makefile
hl/c++/test/Makefile
hl/c++/examples/Makefile
hl/c++/examples/run-hlc++-ex.sh
hl/fortran/Makefile
hl/fortran/src/Makefile
hl/fortran/test/Makefile
hl/fortran/examples/Makefile
hl/fortran/examples/run-hlfortran-ex.sh])
AC_CONFIG_COMMANDS([.classes], [], [$MKDIR_P java/src/.classes;
$MKDIR_P java/test/.classes;
$MKDIR_P java/examples/intro/.classes;
$MKDIR_P java/examples/datasets/.classes;
$MKDIR_P java/examples/datatypes/.classes;
$MKDIR_P java/examples/groups/.classes])
AC_OUTPUT
chmod 755 bin/h5cc
if test "X$HDF_CXX" = "Xyes"; then
chmod 755 c++/src/h5c++
fi
if test "X$HDF_FORTRAN" = "Xyes"; then
chmod 755 fortran/src/h5fc
2017-09-21 03:38:00 +08:00
## libtool does not pass the correct argument linker (wl=) for the Intel Fortran compiler
## on OS X, which is needed when building shared libraries on OS X. This script
## replaces the 3rd occurrence, which is for Fortran, of wl="" with wl="-Wl," (HDFFV-2772)
case "`uname`" in
Darwin*)
cat libtool | awk '/wl=\"/{c++;if(c==3){sub("wl=\"\"","wl=\"-Wl,\"");c=0}}1' > libtool.tmp && mv -f libtool.tmp libtool && chmod 755 libtool
;;
esac
2017-09-21 03:38:00 +08:00
### libtool does not pass the correct argument linking (-Wl,-Wl,,) for the NAG Fortran compiler
### on Linux (other OSs have not been tested).
### Therefore, detect if we are using the NAG Fortran compiler, and replace the wl="-Wl," for Fortran to
2017-08-03 22:20:05 +08:00
### wl="-Wl,-Wl,," in the libtool file. (HDFFV-10037)
case "`uname`" in
Linux*)
if test "X$FC_BASENAME" = "Xnagfor"; then
2017-10-25 23:32:33 +08:00
cat libtool | awk '/BEGIN LIBTOOL TAG CONFIG: FC/{flag=1}flag&&/wl=/{$NF="wl=\"-Wl,-Wl,,\"";flag=0}1' > libtool.tmp && mv -f libtool.tmp libtool && chmod 755 libtool
fi
;;
esac
fi
## HDF5 configure code created by autotools with gcc 4.9.2 is adding problematic
## linker flags: -l with no library name; -l <libname>, specifically gfortran or m.
## This sed script corrects "-l <libname>" first and then "-l " with no library name.
## If the order is not preserved, all instances of "-l " will be removed.
sed -e '/^postdeps/ s/-l \([a-zA-Z]\)/-l\1/g' -e '/^postdeps/ s/-l //g' -i libtool
## show the configure settings
cat src/libhdf5.settings