hdf5/test/stab.c

203 lines
4.7 KiB
C
Raw Normal View History

[svn-r949] Changes since 19981124 ---------------------- ./src/H5T.c Fixed a typo in the registration of the `unsigned char' to `unsigned long long' type conversion that caused it to not be registered, falling back to software whenever that conversion path was taken. ./MANIFEST ./test/Makefile.in ./test/testhdf5.c ./test/testhdf5.h ./test/theap.c [REMOVED] ./test/lheap.c [NEW] ./test/tohdr.c [REMOVED] ./test/ohdr.c [NEW] ./test/tstab.c [REMOVED] ./test/stab.c [NEW] Removed the `t' from the front of these names and made each test a stand-alone program following the format of most of the other tests. ./test/big.c Uses libh5test.a but always sets the low-level driver to 1GB file family. The `#if' near the top to set the data space to 8GB has been simplified now that `long_long' is always defined and the error message is improved when `long_long' isn't wide enough. Cleanup code was added to the error handling. ./test/gheap.c ./test/istore.c Uses libh5test.a. Added error cleanup code. ./test/dtypes.c ./test/h5test.c Added 68 new tests that check hardware and software conversions between `long long' and `unsigned long long' and the other integer types. The tests only run on machines where sizeof(long_long)!=sizeof(long). We test a total of 180 different integer conversions, half in hardware and half in software. Cut down the number of times each test is run from 5 to 1 so it doesn't take so long. If you want to run more times there's a constant that can be changed at the top of the file. ./test/extend.c Removed unused variable. ./test/h5test.c ./test/h5test.h ./test/external.c ./test/fillval.c The h5_cleanup() returns true/false so it can be used in an `if' statement to clean up additional files. ./doc/html/Environment.html Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions. ./src/H5P.c Changed the trace type for the second argument from `Iu' to `x' since it's an output parameter. ./INSTALL Added a warning that the GNU zlib that comes with the latest version of HDF4 is too old to use with HDF5 and must be renamed so configure doesn't see it when `--enable-hdf4' is used.
1998-11-25 22:58:22 +08:00
/*
* Copyright <EFBFBD> 1998 NCSA
* All rights reserved.
*
* Programmer: Robb Matzke <matzke@llnl.gov>
* Tuesday, November 24, 1998
*/
#include <h5test.h>
/*
* This file needs to access private datatypes from the H5G package.
*/
#define H5G_PACKAGE
#include <H5Gpkg.h>
const char *FILENAME[] = {
"stab1",
"stab2",
NULL
};
/*-------------------------------------------------------------------------
* Function: test_misc
*
* Purpose: Test miscellaneous group stuff.
*
* Return: Success: 0
*
* Failure: number of errors
*
* Programmer: Robb Matzke
* Tuesday, November 24, 1998
*
* Modifications:
*
*-------------------------------------------------------------------------
*/
static int
test_misc(hid_t fapl)
{
hid_t file=-1;
hid_t g1=-1, g2=-1, g3=-1;
char comment[64], filename[1024];
/* Test current working groups */
TESTING("miscellaneous group tests");
h5_fixname(FILENAME[0], fapl, filename, sizeof filename);
if ((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl))<0)
goto error;
if ((g1=H5Gcreate(file, "test_1a", 0))<0) goto error;
if ((g2=H5Gcreate(g1, "sub_1", 0))<0) goto error;
if ((g3=H5Gcreate(file, "test_1b", 0))<0) goto error;
if (H5Gset_comment(g3, ".", "hello world")<0) goto error;
/* Close all groups */
if (H5Gclose(g1)<0) goto error;
if (H5Gclose(g2)<0) goto error;
if (H5Gclose(g3)<0) goto error;
/* Open all groups with absolute names to check for exsistence */
if ((g1=H5Gopen(file, "/test_1a"))<0) goto error;
if ((g2=H5Gopen(file, "/test_1a/sub_1"))<0) goto error;
if ((g3=H5Gopen(file, "/test_1b"))<0) goto error;
if (H5Gget_comment(g3, "././.", sizeof comment, comment)<0) goto error;
if (strcmp(comment, "hello world")) {
FAILED();
puts(" Read the wrong comment string from the group.");
printf(" got: \"%s\"\n ans: \"hello world\"\n", comment);
goto error;
}
/* Close everything */
if (H5Gclose(g1)<0) goto error;
if (H5Gclose(g2)<0) goto error;
if (H5Gclose(g3)<0) goto error;
if (H5Fclose(file)<0) goto error;
PASSED();
return 0;
error:
H5E_BEGIN_TRY {
H5Gclose(g1);
H5Gclose(g2);
H5Gclose(g3);
H5Fclose(file);
} H5E_END_TRY;
return 1;
}
/*-------------------------------------------------------------------------
* Function: test_large
*
* Purpose: Creates a really large directory.
*
* Return: Success: 0
*
* Failure: number of errors
*
* Programmer: Robb Matzke
* robb@maya.nuance.com
* Aug 29 1997
*
* Modifications:
*
*-------------------------------------------------------------------------
*/
static int
test_large(hid_t fapl)
{
hid_t file=-1, cwg=-1, fcpl=-1, dir=-1;
int i;
char name[1024];
int nsyms = 5000;
TESTING("large directories");
/*
* Use larger symbol table data structures to be more efficient, use
* defaults to bang harder on the library for testing.
*/
fcpl = H5Pcreate(H5P_FILE_CREATE);
H5Pset_sym_k(fcpl, 16, 16);
h5_fixname(FILENAME[1], fapl, name, sizeof name);
if ((file=H5Fcreate(name, H5F_ACC_TRUNC, fcpl, fapl))<0) goto error;
/*
* Create a directory that has so many entries that the root
* of the B-tree ends up splitting.
*/
if ((cwg=H5Gcreate(file, "/big", (size_t)nsyms*16+2))<0) goto error;
for (i=0; i<nsyms; i++) {
sprintf(name, "%05d%05d", rand()%100000, i);
[svn-r1568] Changes since 19990730 ---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments.
1999-08-11 04:21:32 +08:00
#if 0
fprintf(stderr, "%s\n", name);
#endif
[svn-r949] Changes since 19981124 ---------------------- ./src/H5T.c Fixed a typo in the registration of the `unsigned char' to `unsigned long long' type conversion that caused it to not be registered, falling back to software whenever that conversion path was taken. ./MANIFEST ./test/Makefile.in ./test/testhdf5.c ./test/testhdf5.h ./test/theap.c [REMOVED] ./test/lheap.c [NEW] ./test/tohdr.c [REMOVED] ./test/ohdr.c [NEW] ./test/tstab.c [REMOVED] ./test/stab.c [NEW] Removed the `t' from the front of these names and made each test a stand-alone program following the format of most of the other tests. ./test/big.c Uses libh5test.a but always sets the low-level driver to 1GB file family. The `#if' near the top to set the data space to 8GB has been simplified now that `long_long' is always defined and the error message is improved when `long_long' isn't wide enough. Cleanup code was added to the error handling. ./test/gheap.c ./test/istore.c Uses libh5test.a. Added error cleanup code. ./test/dtypes.c ./test/h5test.c Added 68 new tests that check hardware and software conversions between `long long' and `unsigned long long' and the other integer types. The tests only run on machines where sizeof(long_long)!=sizeof(long). We test a total of 180 different integer conversions, half in hardware and half in software. Cut down the number of times each test is run from 5 to 1 so it doesn't take so long. If you want to run more times there's a constant that can be changed at the top of the file. ./test/extend.c Removed unused variable. ./test/h5test.c ./test/h5test.h ./test/external.c ./test/fillval.c The h5_cleanup() returns true/false so it can be used in an `if' statement to clean up additional files. ./doc/html/Environment.html Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions. ./src/H5P.c Changed the trace type for the second argument from `Iu' to `x' since it's an output parameter. ./INSTALL Added a warning that the GNU zlib that comes with the latest version of HDF4 is too old to use with HDF5 and must be renamed so configure doesn't see it when `--enable-hdf4' is used.
1998-11-25 22:58:22 +08:00
if ((dir=H5Gcreate(cwg, name, 0))<0) goto error;
if (H5Gclose(dir)<0) goto error;
}
if (H5Gclose(cwg)<0) goto error;
/* Close everything */
if (H5Pclose(fcpl)<0) goto error;
if (H5Fclose(file)<0) goto error;
PASSED();
return 0;
error:
H5E_BEGIN_TRY {
H5Pclose(fcpl);
H5Gclose(dir);
H5Gclose(cwg);
H5Fclose(file);
} H5E_END_TRY;
return 1;
}
/*-------------------------------------------------------------------------
* Function: main
*
* Purpose: Test groups
*
* Return: Success: zero
*
* Failure: non-zero
*
* Programmer: Robb Matzke
* Tuesday, November 24, 1998
*
* Modifications:
*
*-------------------------------------------------------------------------
*/
int
main(void)
{
hid_t fapl;
int nerrors=0;
/* Reset library */
h5_reset();
fapl = h5_fileaccess();
/* Perform tests */
nerrors += test_misc(fapl);
nerrors += test_large(fapl);
if (nerrors) goto error;
/* Cleanup */
puts("All symbol table tests passed.");
h5_cleanup(fapl);
return 0;
error:
puts("*** TESTS FAILED ***");
return 1;
}