2003-02-25 04:19:01 +08:00
|
|
|
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
|
|
* Copyright by the Board of Trustees of the University of Illinois. *
|
|
|
|
* All rights reserved. *
|
|
|
|
* *
|
|
|
|
* This file is part of HDF5. The full HDF5 copyright notice, including *
|
|
|
|
* terms governing use, modification, and redistribution, is contained in *
|
|
|
|
* the files COPYING and Copyright.html. COPYING can be found at the root *
|
|
|
|
* of the source code distribution tree; Copyright.html can be found at the *
|
|
|
|
* root level of an installed copy of the electronic HDF5 document set and *
|
|
|
|
* is linked from the top-level documents page. It can also be found at *
|
|
|
|
* http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have *
|
|
|
|
* access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. *
|
|
|
|
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
FILE
|
|
|
|
refstr.c
|
|
|
|
Test HDF reference counted string routines.
|
|
|
|
|
|
|
|
REMARKS
|
|
|
|
|
|
|
|
DESIGN
|
|
|
|
|
|
|
|
BUGS/LIMITATIONS
|
|
|
|
|
|
|
|
EXPORTED ROUTINES
|
|
|
|
|
|
|
|
AUTHOR
|
|
|
|
Quincey Koziol
|
|
|
|
|
|
|
|
MODIFICATION HISTORY
|
|
|
|
12/17/02 - Started coding
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "testhdf5.h"
|
|
|
|
#include "H5FLprivate.h"
|
|
|
|
#include "H5RSprivate.h"
|
|
|
|
|
|
|
|
/* Declare extern the PQ free list for the wrapped strings */
|
|
|
|
H5FL_BLK_EXTERN(str_buf);
|
|
|
|
|
|
|
|
/****************************************************************
|
|
|
|
**
|
|
|
|
** test_refstr_init(): Test basic H5RS (ref-counted strings) code.
|
|
|
|
** Initialize data for RS testing
|
|
|
|
**
|
|
|
|
****************************************************************/
|
|
|
|
static void
|
|
|
|
test_refstr_init(void)
|
|
|
|
{
|
|
|
|
} /* end test_refstr_init() */
|
|
|
|
|
|
|
|
/****************************************************************
|
|
|
|
**
|
|
|
|
** test_refstr_create(): Test basic H5RS (ref-counted strings) code.
|
|
|
|
** Tests creating and closing ref-counted strings.
|
|
|
|
**
|
|
|
|
****************************************************************/
|
|
|
|
static void
|
|
|
|
test_refstr_create(void)
|
|
|
|
{
|
|
|
|
H5RS_str_t *rs; /* Ref-counted string created */
|
|
|
|
unsigned count; /* Reference count on string */
|
|
|
|
herr_t ret; /* Generic return value */
|
|
|
|
|
|
|
|
/* Output message about test being performed */
|
|
|
|
MESSAGE(5, ("Testing Creating & Closing Ref-Counted Strings\n"));
|
|
|
|
|
|
|
|
/* Try creating a ref-counted string */
|
|
|
|
rs=H5RS_create("foo");
|
|
|
|
CHECK(rs, NULL, "H5RS_create");
|
|
|
|
|
|
|
|
/* Get the reference count on the string */
|
2003-02-25 04:19:01 +08:00
|
|
|
count=H5RS_get_count(rs);
|
|
|
|
VERIFY(count, 1, "H5RS_get_count");
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
|
|
|
|
/* Try closing a real ref-counted string */
|
|
|
|
ret=H5RS_decr(rs);
|
|
|
|
CHECK(ret, FAIL, "H5RS_decr");
|
|
|
|
|
|
|
|
} /* end test_refstr_create() */
|
|
|
|
|
|
|
|
/****************************************************************
|
|
|
|
**
|
|
|
|
** test_refstr_count(): Test basic H5RS (ref-counted strings) code.
|
|
|
|
** Tests reference counting on ref-counted strings.
|
|
|
|
**
|
|
|
|
****************************************************************/
|
|
|
|
static void
|
|
|
|
test_refstr_count(void)
|
|
|
|
{
|
|
|
|
H5RS_str_t *rs; /* Ref-counted string created */
|
|
|
|
unsigned count; /* Reference count on string */
|
|
|
|
herr_t ret; /* Generic return value */
|
|
|
|
|
|
|
|
/* Output message about test being performed */
|
|
|
|
MESSAGE(5, ("Testing Incrementing & Decrementing Ref-Counted Strings\n"));
|
|
|
|
|
|
|
|
/* Try creating a ref-counted string */
|
|
|
|
rs=H5RS_create("foo");
|
|
|
|
CHECK(rs, NULL, "H5RS_create");
|
|
|
|
|
|
|
|
/* Get the reference count on the string */
|
2003-02-25 04:19:01 +08:00
|
|
|
count=H5RS_get_count(rs);
|
|
|
|
VERIFY(count, 1, "H5RS_get_count");
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
|
|
|
|
/* Increment reference count */
|
|
|
|
ret=H5RS_incr(rs);
|
|
|
|
CHECK(ret, FAIL, "H5RS_incr");
|
|
|
|
|
|
|
|
/* Get the reference count on the string */
|
2003-02-25 04:19:01 +08:00
|
|
|
count=H5RS_get_count(rs);
|
|
|
|
VERIFY(count, 2, "H5RS_get_count");
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
|
|
|
|
/* Decrement reference count for string */
|
|
|
|
ret=H5RS_decr(rs);
|
|
|
|
CHECK(ret, FAIL, "H5RS_decr");
|
|
|
|
|
|
|
|
/* Get the reference count on the string */
|
2003-02-25 04:19:01 +08:00
|
|
|
count=H5RS_get_count(rs);
|
|
|
|
VERIFY(count, 1, "H5RS_get_count");
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
|
|
|
|
/* Decrement reference count for string */
|
|
|
|
ret=H5RS_decr(rs);
|
|
|
|
CHECK(ret, FAIL, "H5RS_decr");
|
|
|
|
|
|
|
|
} /* end test_refstr_count() */
|
|
|
|
|
|
|
|
/****************************************************************
|
|
|
|
**
|
|
|
|
** test_refstr_dup(): Test basic H5RS (ref-counted strings) code.
|
|
|
|
** Tests duplicating ref-counted strings.
|
|
|
|
**
|
|
|
|
****************************************************************/
|
|
|
|
static void
|
|
|
|
test_refstr_dup(void)
|
|
|
|
{
|
|
|
|
H5RS_str_t *rs1; /* Ref-counted string created */
|
|
|
|
H5RS_str_t *rs2; /* Ref-counted string created */
|
|
|
|
unsigned count; /* Reference count on string */
|
|
|
|
herr_t ret; /* Generic return value */
|
|
|
|
|
|
|
|
/* Output message about test being performed */
|
|
|
|
MESSAGE(5, ("Testing Duplicating Ref-Counted Strings\n"));
|
|
|
|
|
|
|
|
/* Try creating a ref-counted string */
|
|
|
|
rs1=H5RS_create("foo");
|
|
|
|
CHECK(rs1, NULL, "H5RS_create");
|
|
|
|
|
|
|
|
/* Get the reference count on the string */
|
2003-02-25 04:19:01 +08:00
|
|
|
count=H5RS_get_count(rs1);
|
|
|
|
VERIFY(count, 1, "H5RS_get_count");
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
|
|
|
|
/* Duplicate r-string */
|
|
|
|
rs2=H5RS_dup(rs1);
|
|
|
|
CHECK(rs2, NULL, "H5RS_dup");
|
|
|
|
|
|
|
|
/* Get the reference count on the strings */
|
2003-02-25 04:19:01 +08:00
|
|
|
count=H5RS_get_count(rs1);
|
|
|
|
VERIFY(count, 2, "H5RS_get_count");
|
|
|
|
count=H5RS_get_count(rs2);
|
|
|
|
VERIFY(count, 2, "H5RS_get_count");
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
|
|
|
|
/* Decrement reference count for string */
|
|
|
|
ret=H5RS_decr(rs2);
|
|
|
|
CHECK(ret, FAIL, "H5RS_decr");
|
|
|
|
|
|
|
|
/* Get the reference count on the string */
|
2003-02-25 04:19:01 +08:00
|
|
|
count=H5RS_get_count(rs1);
|
|
|
|
VERIFY(count, 1, "H5RS_get_count");
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
|
|
|
|
/* Decrement reference count for string */
|
|
|
|
ret=H5RS_decr(rs1);
|
|
|
|
CHECK(ret, FAIL, "H5RS_decr");
|
|
|
|
|
|
|
|
} /* end test_refstr_dup() */
|
|
|
|
|
|
|
|
/****************************************************************
|
|
|
|
**
|
|
|
|
** test_refstr_cmp(): Test basic H5RS (ref-counted strings) code.
|
|
|
|
** Tests comparing ref-counted strings.
|
|
|
|
**
|
|
|
|
****************************************************************/
|
|
|
|
static void
|
|
|
|
test_refstr_cmp(void)
|
|
|
|
{
|
|
|
|
H5RS_str_t *rs1; /* Ref-counted string created */
|
|
|
|
H5RS_str_t *rs2; /* Ref-counted string created */
|
|
|
|
int cmp; /* Comparison value */
|
|
|
|
ssize_t len; /* Length of string */
|
|
|
|
herr_t ret; /* Generic return value */
|
|
|
|
|
|
|
|
/* Output message about test being performed */
|
|
|
|
MESSAGE(5, ("Testing Comparing Ref-Counted Strings\n"));
|
|
|
|
|
|
|
|
/* Create first reference counted string */
|
|
|
|
rs1=H5RS_create("foo");
|
|
|
|
CHECK(rs1, NULL, "H5RS_create");
|
|
|
|
|
|
|
|
/* Create second reference counted string */
|
|
|
|
rs2=H5RS_create("foo2");
|
|
|
|
CHECK(rs2, NULL, "H5RS_create");
|
|
|
|
|
|
|
|
/* Compare the strings in various ways */
|
|
|
|
cmp=H5RS_cmp(rs1,rs1);
|
|
|
|
VERIFY(cmp, 0, "H5RS_cmp");
|
|
|
|
cmp=H5RS_cmp(rs2,rs2);
|
|
|
|
VERIFY(cmp, 0, "H5RS_cmp");
|
|
|
|
cmp=H5RS_cmp(rs1,rs2);
|
2004-01-10 09:41:13 +08:00
|
|
|
if(cmp>=0)
|
|
|
|
TestErrPrintf("%d: string comparison incorrect!\n",__LINE__);
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
|
|
|
|
/* Check the lengths of the strings also */
|
|
|
|
len=H5RS_len(rs1);
|
|
|
|
VERIFY(len, 3, "H5RS_len");
|
|
|
|
len=H5RS_len(rs2);
|
|
|
|
VERIFY(len, 4, "H5RS_len");
|
|
|
|
|
|
|
|
/* Decrement reference count for strings */
|
|
|
|
ret=H5RS_decr(rs2);
|
|
|
|
CHECK(ret, FAIL, "H5RS_decr");
|
|
|
|
ret=H5RS_decr(rs1);
|
|
|
|
CHECK(ret, FAIL, "H5RS_decr");
|
|
|
|
|
|
|
|
} /* end test_refstr_cmp() */
|
|
|
|
|
|
|
|
/****************************************************************
|
|
|
|
**
|
|
|
|
** test_refstr_wrap(): Test basic H5RS (ref-counted strings) code.
|
|
|
|
** Tests wrapping ref-counted strings around existing strings.
|
|
|
|
**
|
|
|
|
****************************************************************/
|
|
|
|
static void
|
|
|
|
test_refstr_wrap(void)
|
|
|
|
{
|
|
|
|
H5RS_str_t *rs; /* Ref-counted string created */
|
|
|
|
const char *s; /* Pointer to raw string in ref-counted string */
|
|
|
|
char buf[16]; /* Buffer to wrap */
|
|
|
|
int cmp; /* Comparison value */
|
|
|
|
herr_t ret; /* Generic return value */
|
|
|
|
|
|
|
|
/* Output message about test being performed */
|
|
|
|
MESSAGE(5, ("Testing Wrapping Ref-Counted Strings\n"));
|
|
|
|
|
|
|
|
/* Initialize buffer */
|
|
|
|
HDstrcpy(buf,"foo");
|
|
|
|
|
|
|
|
/* Wrap ref-counted string around existing buffer */
|
|
|
|
rs=H5RS_wrap(buf);
|
|
|
|
CHECK(rs, NULL, "H5RS_wrap");
|
|
|
|
|
|
|
|
/* Get pointer to raw string in ref-counted string */
|
2003-02-25 04:19:01 +08:00
|
|
|
s=H5RS_get_str(rs);
|
|
|
|
CHECK(s, NULL, "H5RS_get_str");
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
VERIFY(s, buf, "wrapping");
|
|
|
|
cmp=HDstrcmp(s,buf);
|
|
|
|
VERIFY(cmp, 0, "HDstrcmp");
|
|
|
|
|
|
|
|
/* Increment reference count (should duplicate string) */
|
|
|
|
ret=H5RS_incr(rs);
|
|
|
|
CHECK(ret, FAIL, "H5RS_incr");
|
|
|
|
|
|
|
|
/* Change the buffer initially wrapped */
|
|
|
|
buf[0]='F';
|
|
|
|
|
|
|
|
/* Get pointer to raw string in ref-counted string */
|
2003-02-25 04:19:01 +08:00
|
|
|
s=H5RS_get_str(rs);
|
|
|
|
CHECK(s, NULL, "H5RS_get_str");
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
CHECK(s, buf, "wrapping");
|
|
|
|
cmp=HDstrcmp(s,buf);
|
2004-01-10 09:41:13 +08:00
|
|
|
if(cmp<=0)
|
|
|
|
TestErrPrintf("%d: string comparison incorrect!\n",__LINE__);
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
|
|
|
|
/* Decrement reference count for string */
|
|
|
|
ret=H5RS_decr(rs);
|
|
|
|
CHECK(ret, FAIL, "H5RS_decr");
|
|
|
|
ret=H5RS_decr(rs);
|
|
|
|
CHECK(ret, FAIL, "H5RS_decr");
|
|
|
|
|
|
|
|
} /* end test_refstr_wrap() */
|
|
|
|
|
|
|
|
/****************************************************************
|
|
|
|
**
|
|
|
|
** test_refstr_own(): Test basic H5RS (ref-counted strings) code.
|
|
|
|
** Tests transferring ownership of dynamically allocated strings
|
|
|
|
** to ref-counted strings.
|
|
|
|
**
|
|
|
|
****************************************************************/
|
|
|
|
static void
|
|
|
|
test_refstr_own(void)
|
|
|
|
{
|
|
|
|
H5RS_str_t *rs; /* Ref-counted string created */
|
|
|
|
char *s; /* Pointer to string to transfer */
|
|
|
|
const char *t; /* Temporary pointers to string */
|
|
|
|
int cmp; /* Comparison value */
|
|
|
|
herr_t ret; /* Generic return value */
|
|
|
|
|
|
|
|
/* Output message about test being performed */
|
|
|
|
MESSAGE(5, ("Testing Transferring Ref-Counted Strings\n"));
|
|
|
|
|
|
|
|
/* Initialize buffer */
|
|
|
|
s = H5FL_BLK_MALLOC(str_buf,HDstrlen("foo") + 1);
|
|
|
|
HDstrcpy(s, "foo");
|
|
|
|
|
|
|
|
/* Transfer ownership of dynamically allocated string to ref-counted string */
|
|
|
|
rs=H5RS_own(s);
|
|
|
|
CHECK(rs, NULL, "H5RS_own");
|
|
|
|
|
|
|
|
/* Get pointer to raw string in ref-counted string */
|
2003-02-25 04:19:01 +08:00
|
|
|
t=H5RS_get_str(rs);
|
|
|
|
CHECK(t, NULL, "H5RS_get_str");
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
VERIFY(t, s, "transferring");
|
|
|
|
cmp=HDstrcmp(s,t);
|
|
|
|
VERIFY(cmp, 0, "HDstrcmp");
|
|
|
|
|
|
|
|
/* Increment reference count (should NOT duplicate string) */
|
|
|
|
ret=H5RS_incr(rs);
|
|
|
|
CHECK(ret, FAIL, "H5RS_incr");
|
|
|
|
|
|
|
|
/* Change the buffer initially wrapped */
|
|
|
|
*s='F';
|
|
|
|
|
|
|
|
/* Get pointer to raw string in ref-counted string */
|
2003-02-25 04:19:01 +08:00
|
|
|
t=H5RS_get_str(rs);
|
|
|
|
CHECK(t, NULL, "H5RS_get_str");
|
[svn-r6252] Purpose:
Lots of performance improvements & a couple new internal API interfaces.
Description:
Performance Improvements:
- Cached file offset & length sizes in shared file struct, to avoid
constantly looking them up in the FCPL.
- Generic property improvements:
- Added "revision" number to generic property classes to speed
up comparisons.
- Changed method of storing properties from using a hash-table
to the TBBT routines in the library.
- Share the propery names between classes and the lists derived
from them.
- Removed redundant 'def_value' buffer from each property.
- Switching code to use a "copy on write" strategy for
properties in each list, where the properties in each list
are shared with the properties in the class, until a
property's value is changed in a list.
- Fixed error in layout code which was allocating too many buffers.
- Redefined public macros of the form (H5open()/H5check, <variable>)
internally to only be (<variable>), avoiding innumerable useless
calls to H5open() and H5check_version().
- Reuse already zeroed buffers in H5F_contig_fill instead of
constantly re-zeroing them.
- Don't write fill values if writing entire dataset.
- Use gettimeofday() system call instead of time() system when
checking the modification time of a dataset.
- Added reference counted string API and use it for tracking the
names of objects opening in a file (for the ID->name code).
- Removed redundant H5P_get() calls in B-tree routines.
- Redefine H5T datatype macros internally to the library, to avoid
calling H5check redundantly.
- Keep dataspace information for dataset locally instead of reading
from disk each time. Added new module to track open objects
in a file, to allow this (which will be useful eventually for
some FPH5 metadata caching issues).
- Remove H5AC_find macro which was inlining metadata cache lookups,
and call function instead.
- Remove redundant memset() calls from H5G_namei() routine.
- Remove redundant checking of object type when locating objects
in metadata cache and rely on the address only.
- Create default dataset object to use when default dataset creation
property list is used to create datasets, bypassing querying
for all the property list values.
- Use default I/O vector size when performing raw data with the
default dataset transfer property list, instead of querying for
I/O vector size.
- Remove H5P_DEFAULT internally to the library, replacing it with
more specific default property list based on the type of
property list needed.
- Remove redundant memset() calls in object header message (H5O*)
routines.
- Remove redunant memset() calls in data I/O routines.
- Split free-list allocation routines into malloc() and calloc()-
like routines, instead of one combined routine.
- Remove lots of indirection in H5O*() routines.
- Simplify metadata cache entry comparison routine (used when
flushing entire cache out).
- Only enable metadata cache statistics when H5AC_DEBUG is turned
on, instead of always tracking them.
- Simplify address comparison macro (H5F_addr_eq).
- Remove redundant metadata cache entry protections during dataset
creation by protecting the object header once and making all
the modifications necessary for the dataset creation before
unprotecting it.
- Reduce # of "number of element in extent" computations performed
by computing and storing the value during dataspace creation.
- Simplify checking for group location's file information, when file
has not been involving in file-mounting operations.
- Use binary encoding for modification time, instead of ASCII.
- Hoist H5HL_peek calls (to get information in a local heap)
out of loops in many group routine.
- Use static variable for iterators of selections, instead of
dynamically allocation them each time.
- Lookup & insert new entries in one step, avoiding traversing
group's B-tree twice.
- Fixed memory leak in H5Gget_objname_idx() routine (tangential to
performance improvements, but fixed along the way).
- Use free-list for reference counted strings.
- Don't bother copying object names into cached group entries,
since they are re-created when an object is opened.
The benchmark I used to measure these results created several thousand
small (2K) datasets in a file and wrote out the data for them. This is
Elena's "regular.c" benchmark.
These changes resulted in approximately ~4.3x speedup of the
development branch when compared to the previous code in the
development branch and ~1.4x speedup compared to the release
branch.
Additionally, these changes reduce the total memory used (code and
data) by the development branch by ~800KB, bringing the development
branch back into the same ballpark as the release branch.
I'll send out a more detailed description of the benchmark results
as a followup note.
New internal API routines:
Added "reference counted strings" API for tracking strings that get
used by multiple owners without duplicating the strings.
Added "ternary search tree" API for text->object mappings.
Platforms tested:
Tested h5committest {arabica (fortran), eirene (fortran, C++)
modi4 (parallel, fortran)}
Other platforms/configurations tested?
FreeBSD 4.7 (sleipnir) serial & parallel
Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
|
|
|
VERIFY(t, s, "transferring");
|
|
|
|
cmp=HDstrcmp(t,s);
|
|
|
|
VERIFY(cmp, 0, "HDstrcmp");
|
|
|
|
|
|
|
|
/* Decrement reference count for string */
|
|
|
|
ret=H5RS_decr(rs);
|
|
|
|
CHECK(ret, FAIL, "H5RS_decr");
|
|
|
|
ret=H5RS_decr(rs);
|
|
|
|
CHECK(ret, FAIL, "H5RS_decr");
|
|
|
|
|
|
|
|
} /* end test_refstr_own() */
|
|
|
|
|
|
|
|
/****************************************************************
|
|
|
|
**
|
|
|
|
** test_refstr_finalize(): Test basic H5RS (ref-counted strings) code.
|
|
|
|
** Wrap up data for ref-counted string testing
|
|
|
|
**
|
|
|
|
****************************************************************/
|
|
|
|
static void
|
|
|
|
test_refstr_finalize(void)
|
|
|
|
{
|
|
|
|
} /* end test_refstr_finalize() */
|
|
|
|
|
|
|
|
/****************************************************************
|
|
|
|
**
|
|
|
|
** test_refstr(): Main H5RS testing routine.
|
|
|
|
**
|
|
|
|
****************************************************************/
|
|
|
|
void
|
|
|
|
test_refstr(void)
|
|
|
|
{
|
|
|
|
/* Output message about test being performed */
|
|
|
|
MESSAGE(5, ("Testing Reference Counted Strings\n"));
|
|
|
|
|
|
|
|
/* Initialize ref-counted strings testing data */
|
|
|
|
test_refstr_init();
|
|
|
|
|
|
|
|
/* Actual ref-counted strings tests */
|
|
|
|
test_refstr_create(); /* Test ref-counted string creation */
|
|
|
|
test_refstr_count(); /* Test ref-counted string counting */
|
|
|
|
test_refstr_dup(); /* Test ref-counted string duplication */
|
|
|
|
test_refstr_cmp(); /* Test ref-counted string comparison */
|
|
|
|
test_refstr_wrap(); /* Test ref-counted string wrapping */
|
|
|
|
test_refstr_own(); /* Test ref-counted string ownership transfer */
|
|
|
|
|
|
|
|
/* Finalize ref-counted strings testing data */
|
|
|
|
test_refstr_finalize();
|
|
|
|
} /* end test_refstr() */
|
|
|
|
|