hdf5/config/linux

76 lines
2.1 KiB
Plaintext
Raw Normal View History

[svn-r335] Changes since 19980330 ---------------------- ./MANIFEST ./src/Makefile.in ./test/Makefile.in Added new files. ./config/linux ./src/H5HL.c ./src/H5HLprivate.h ./src/H5MF.c ./src/H5MFprivate.h Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list. ./html/H5.format.html Updated shared object message information. ./src/H5D.c Datasets can now share data types. ./src/H5F.c Updated a comment that referred to H5ACC_WRITE. ./src/H5HG.c ./src/H5HGprivate.h Moved a few things around. Made debugging better so you can now give a collection address to ./src/debug and it shows some useful stuff. ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c [NEW] ./src/H5Ostab.c Supports shared messages. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h The H5Tshare() function allows the user to give the library hints about how a data type will be used. ./test/shtype.c Tests the H5Tshare() function. ./test/gheap.c Tests the global heap. ./configure.in ./config/BlankForm [NEW] ./config/alpha-dec ./config/freebsd2.2.1 ./config/hpux10.20 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 Cleaned up lots of configuration stuff and made the site configuration files lots easier and more uniform. To make a new file grab the BlankForm and modify it. By default, debugging is turned on for most packages. Within a package one can use `#ifdef H5AC_DEBUG' to wrap debugging code. Other options are: --enable-debug --enable-debug=yes The default, most but not all packages. --disable-debug --enable-debug=no --enable-debug=none The symbol NDEBUG is defined and none of the package debug symbols. --enable-debug=all Debugging is turned on for all packages. This might produce lots of output. --enable-debug=g,d Debugging is turned on for H5G and H5D. A compile mode is also now supported --enable-production --enable-production=yes The library is compiled with optimizations turned on. The compiler flags are augmented by adding PROD_CFLAGS and PROD_CPPFLAGS which are defined in the site config file. --disable-production --enable-production=no The default. The library is compiled for development by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in the site config file. This is usually just `-g'. --enable-production=profile --enable-production=pg Builds a library for profiling by including the flags from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the site config file. This is usullay just `-pg' but it could include optimization flags as well depending on the type of profile one wants. In summary, configure by saying `./configure' and you'll get a development version of the library. Configure by saying `./configure --enable-production --disable-debug' and you'll get a production version with no debugging code.
1998-04-03 11:29:38 +08:00
# -*- shell-script -*-
#
# This file is part of the HDF5 build script. It is processed shortly
# after configure starts and defines, among other things, flags for
# the various compile modes.
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
#
# See BlankForm in this directory for details.
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
# The default compiler is `gcc'.
if test "X-" = "X-$CC"; then
CC=cc
CC_BASENAME=cc
fi
[svn-r129] Changes since 19970916 ---------------------- ./config/depend.in Fixed backslashes in sed script because the H5Gnode.c dependency info was disappearing. You'll have to rerun config.status to rebuild the Makefiles unless you use gnu make. ./config/conclude.in Also removes emacs backup files, TAGS, and svf backup files. ./config/linux Grouped gcc flags and added provisions for debugging vs. production. ./html/H5.format.html Updated messages 0x0008, 0x0009, and 0x000A. ./html/storage.html Documentation describing storage schemes. ./src/Makefile.in ./test/Makefile.in New source files. ./src/H5A.c ./src/H5Apublic.h ./src/H5C.c Changed VOIDP to void* in a couple places. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Bprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h ./src/H5H.c ./src/H5O.c Removed `const' from some variables because H5G_node_found() wanted to modify it's udata argument. Removing const there caused it to cascade to these other locations. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5H.c ./src/H5O.c Added an extra argument to H5AC_find_f() and H5AC_protect(). This arg gets passed to the load() method. Also added an extra argument to the H5AC_find() macro. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra argument passed to the sizeof_rkey() method. ./src/H5Fprivate.c ./src/H5Fistore.c (new) Added indexed I/O operations. ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h Beginning to add H5G_open/close and related bug fixes. ./src/H5Oprivate.h ./src/H5Oistore.c (new) Added the H5O_ISTORE messsage (0x0008) for indexed storage of objects. ./src/H5private.h Added extra braces around both sides of the FUNC_ENTER() and FUNC_LEAVE() macros so FUNC_ENTER() can appear before declarations or after executable statements the second case is used by H5G_namei() to initialize output arguments to sane values before FUNC_ENTER() might return failure. int f () { int decl1; printf ("This happens before FUNC_ENTER()\n"); FUNC_ENTER (...); int another_declaration; ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra arguments for key encoding and decoding. ./src/H5E.c ./src/H5Epublic.h ./src/H5Fistore.c ./src/H5Oistore.c ./src/H5Oprivate.h Indexed, chunked, sparse storage (not ready for general consumption yet). ./src/H5V.c (new) ./src/H5Vprivate.h (new) ./test/hyperslab.c (new) Vector, array, and hyperslab functions. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Fistore.c ./src/H5Gnode.c ./src/H5V.c ./src/H5Vprivate.h ./test/hyperslab.c Added functionality for indexed storage. ./src/H5F.c Fixed problems with seek optimizing. Recommend we disable it until we can implement it in the file/address class since all of HDF5 must be aware of it. ./src/H5O.c Fixed comeent speling erorr :-) ./MANIFEST Added new files. ./config/conclude.in Added the word `Testing' to the test cases. So if a test program is called hyperslab then the make output will contain the line `Testing hyperslab'. ./config/linux The default file I/O library is Posix section 2 on my linux machine so I can do some I/O performance testing. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Added ability to set size of indexed-storage B-tree. ./src/H5D.c ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gpublic.h ./src/H5Gshad.c ./src/H5Gstab.c ./test/stab.c Changed `directory' to `group' in numerous places. ./src/H5private.h The FILELIB constant can be set on the compile command-line. ./src/istore.c NEW Tests for indexed storage.
1997-10-21 07:14:35 +08:00
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
ARCH="-mcpu=pentiumpro -march=pentiumpro -malign-double"
NOFP="-fomit-frame-pointer"
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
# Compiler flags. We use `-v' to get the version number because it almost
# always works on Linux systems.
case `$CC -v 2>&1 |grep 'gcc version' |sed 's/.*gcc version //'` in
2.7.*)
echo " +------------------------------------------------+"
echo " | You have an old version of gcc. Please upgrade |"
echo " | to 2.8.1 or better. Continuing anyway, but |"
echo " | code generation may be wrong on some platforms.|"
echo " +------------------------------------------------+"
sleep 5
CFLAGS="$CFLAGS -ansi"
PROD_CFLAGS="$ARCH -O3 $NOFP -finline-functions -fschedule-insns2"
PROD_CPPFLAGS=
DEBUG_CFLAGS="-g -fverbose-asm"
DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
PROFILE_CFLAGS=-pg
PROFILE_CPPFLAGS=
;;
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
2.8.*)
CFLAGS="$CFLAGS -Wsign-compare"
PROD_CFLAGS="$ARCH -O3 $NOFP -finline-functions -fschedule-insns2"
PROD_CPPFLAGS=
DEBUG_CFLAGS="-g -fverbose-asm"
DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
PROFILE_CFLAGS=-pg
PROFILE_CPPFLAGS=
;;
[svn-r335] Changes since 19980330 ---------------------- ./MANIFEST ./src/Makefile.in ./test/Makefile.in Added new files. ./config/linux ./src/H5HL.c ./src/H5HLprivate.h ./src/H5MF.c ./src/H5MFprivate.h Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list. ./html/H5.format.html Updated shared object message information. ./src/H5D.c Datasets can now share data types. ./src/H5F.c Updated a comment that referred to H5ACC_WRITE. ./src/H5HG.c ./src/H5HGprivate.h Moved a few things around. Made debugging better so you can now give a collection address to ./src/debug and it shows some useful stuff. ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c [NEW] ./src/H5Ostab.c Supports shared messages. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h The H5Tshare() function allows the user to give the library hints about how a data type will be used. ./test/shtype.c Tests the H5Tshare() function. ./test/gheap.c Tests the global heap. ./configure.in ./config/BlankForm [NEW] ./config/alpha-dec ./config/freebsd2.2.1 ./config/hpux10.20 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 Cleaned up lots of configuration stuff and made the site configuration files lots easier and more uniform. To make a new file grab the BlankForm and modify it. By default, debugging is turned on for most packages. Within a package one can use `#ifdef H5AC_DEBUG' to wrap debugging code. Other options are: --enable-debug --enable-debug=yes The default, most but not all packages. --disable-debug --enable-debug=no --enable-debug=none The symbol NDEBUG is defined and none of the package debug symbols. --enable-debug=all Debugging is turned on for all packages. This might produce lots of output. --enable-debug=g,d Debugging is turned on for H5G and H5D. A compile mode is also now supported --enable-production --enable-production=yes The library is compiled with optimizations turned on. The compiler flags are augmented by adding PROD_CFLAGS and PROD_CPPFLAGS which are defined in the site config file. --disable-production --enable-production=no The default. The library is compiled for development by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in the site config file. This is usually just `-g'. --enable-production=profile --enable-production=pg Builds a library for profiling by including the flags from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the site config file. This is usullay just `-pg' but it could include optimization flags as well depending on the type of profile one wants. In summary, configure by saying `./configure' and you'll get a development version of the library. Configure by saying `./configure --enable-production --disable-debug' and you'll get a production version with no debugging code.
1998-04-03 11:29:38 +08:00
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
egcs-*)
CFLAGS="$CFLAGS -Wsign-compare"
PROD_CFLAGS="$ARCH -O6 $NOFP"
PROD_CPPFLAGS=
DEBUG_CFLAGS="-g -fverbose-asm"
DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
PROFILE_CFLAGS=-pg
PROFILE_CPPFLAGS=
;;
[svn-r335] Changes since 19980330 ---------------------- ./MANIFEST ./src/Makefile.in ./test/Makefile.in Added new files. ./config/linux ./src/H5HL.c ./src/H5HLprivate.h ./src/H5MF.c ./src/H5MFprivate.h Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list. ./html/H5.format.html Updated shared object message information. ./src/H5D.c Datasets can now share data types. ./src/H5F.c Updated a comment that referred to H5ACC_WRITE. ./src/H5HG.c ./src/H5HGprivate.h Moved a few things around. Made debugging better so you can now give a collection address to ./src/debug and it shows some useful stuff. ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c [NEW] ./src/H5Ostab.c Supports shared messages. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h The H5Tshare() function allows the user to give the library hints about how a data type will be used. ./test/shtype.c Tests the H5Tshare() function. ./test/gheap.c Tests the global heap. ./configure.in ./config/BlankForm [NEW] ./config/alpha-dec ./config/freebsd2.2.1 ./config/hpux10.20 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 Cleaned up lots of configuration stuff and made the site configuration files lots easier and more uniform. To make a new file grab the BlankForm and modify it. By default, debugging is turned on for most packages. Within a package one can use `#ifdef H5AC_DEBUG' to wrap debugging code. Other options are: --enable-debug --enable-debug=yes The default, most but not all packages. --disable-debug --enable-debug=no --enable-debug=none The symbol NDEBUG is defined and none of the package debug symbols. --enable-debug=all Debugging is turned on for all packages. This might produce lots of output. --enable-debug=g,d Debugging is turned on for H5G and H5D. A compile mode is also now supported --enable-production --enable-production=yes The library is compiled with optimizations turned on. The compiler flags are augmented by adding PROD_CFLAGS and PROD_CPPFLAGS which are defined in the site config file. --disable-production --enable-production=no The default. The library is compiled for development by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in the site config file. This is usually just `-g'. --enable-production=profile --enable-production=pg Builds a library for profiling by including the flags from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the site config file. This is usullay just `-pg' but it could include optimization flags as well depending on the type of profile one wants. In summary, configure by saying `./configure' and you'll get a development version of the library. Configure by saying `./configure --enable-production --disable-debug' and you'll get a production version with no debugging code.
1998-04-03 11:29:38 +08:00
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
pgcc-*)
CFLAGS="$CFLAGS -Wsign-compare"
PROD_CFLAGS="$ARCH -O6 $NOFP"
PROD_CPPFLAGS=
DEBUG_CFLAGS="-g -fverbose-asm"
DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
PROFILE_CFLAGS=-pg
PROFILE_CPPFLAGS=
;;
[svn-r129] Changes since 19970916 ---------------------- ./config/depend.in Fixed backslashes in sed script because the H5Gnode.c dependency info was disappearing. You'll have to rerun config.status to rebuild the Makefiles unless you use gnu make. ./config/conclude.in Also removes emacs backup files, TAGS, and svf backup files. ./config/linux Grouped gcc flags and added provisions for debugging vs. production. ./html/H5.format.html Updated messages 0x0008, 0x0009, and 0x000A. ./html/storage.html Documentation describing storage schemes. ./src/Makefile.in ./test/Makefile.in New source files. ./src/H5A.c ./src/H5Apublic.h ./src/H5C.c Changed VOIDP to void* in a couple places. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Bprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h ./src/H5H.c ./src/H5O.c Removed `const' from some variables because H5G_node_found() wanted to modify it's udata argument. Removing const there caused it to cascade to these other locations. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5H.c ./src/H5O.c Added an extra argument to H5AC_find_f() and H5AC_protect(). This arg gets passed to the load() method. Also added an extra argument to the H5AC_find() macro. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra argument passed to the sizeof_rkey() method. ./src/H5Fprivate.c ./src/H5Fistore.c (new) Added indexed I/O operations. ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h Beginning to add H5G_open/close and related bug fixes. ./src/H5Oprivate.h ./src/H5Oistore.c (new) Added the H5O_ISTORE messsage (0x0008) for indexed storage of objects. ./src/H5private.h Added extra braces around both sides of the FUNC_ENTER() and FUNC_LEAVE() macros so FUNC_ENTER() can appear before declarations or after executable statements the second case is used by H5G_namei() to initialize output arguments to sane values before FUNC_ENTER() might return failure. int f () { int decl1; printf ("This happens before FUNC_ENTER()\n"); FUNC_ENTER (...); int another_declaration; ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra arguments for key encoding and decoding. ./src/H5E.c ./src/H5Epublic.h ./src/H5Fistore.c ./src/H5Oistore.c ./src/H5Oprivate.h Indexed, chunked, sparse storage (not ready for general consumption yet). ./src/H5V.c (new) ./src/H5Vprivate.h (new) ./test/hyperslab.c (new) Vector, array, and hyperslab functions. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Fistore.c ./src/H5Gnode.c ./src/H5V.c ./src/H5Vprivate.h ./test/hyperslab.c Added functionality for indexed storage. ./src/H5F.c Fixed problems with seek optimizing. Recommend we disable it until we can implement it in the file/address class since all of HDF5 must be aware of it. ./src/H5O.c Fixed comeent speling erorr :-) ./MANIFEST Added new files. ./config/conclude.in Added the word `Testing' to the test cases. So if a test program is called hyperslab then the make output will contain the line `Testing hyperslab'. ./config/linux The default file I/O library is Posix section 2 on my linux machine so I can do some I/O performance testing. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Added ability to set size of indexed-storage B-tree. ./src/H5D.c ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gpublic.h ./src/H5Gshad.c ./src/H5Gstab.c ./test/stab.c Changed `directory' to `group' in numerous places. ./src/H5private.h The FILELIB constant can be set on the compile command-line. ./src/istore.c NEW Tests for indexed storage.
1997-10-21 07:14:35 +08:00
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
*)
PROD_CFLAGS=-O
PROD_CPPFLAGS=
DEBUG_CFLAGS="-g"
DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2"
PROFILE_CFLAGS=-pg
PROFILE_CPPFLAGS=
;;
esac