hdf5/.github/workflows/main-auto-spc.yml

name: hdf5 dev autotools special CI

# Controls when the action will run. Triggers the workflow on a call
on:
  workflow_call:

permissions:
  contents: read

# A workflow run is made up of one or more jobs that can run sequentially or
# in parallel. We just have one job, but the matrix items defined below will
# run in parallel.
jobs:
  #
  # SPECIAL AUTOTOOLS BUILDS
  #
  # These do not run tests and are not built into the matrix and instead
  # become NEW configs as their name would clobber one of the matrix
  # names (so make sure the names are UNIQUE).
  #

  build_v1_6:
    name: "gcc DBG v1.6 default API (build only)"
    runs-on: ubuntu-latest
    steps:
      # SETUP
      # Only CMake need ninja-build, but we just install it unilaterally
      # libssl, etc. are needed for the ros3 VFD
      - name: Install Linux Dependencies
        run: |
           sudo apt-get update
           sudo apt-get install ninja-build doxygen graphviz
           sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev
           sudo apt install gcc-12 g++-12 gfortran-12
           echo "CC=gcc-12" >> $GITHUB_ENV
           echo "CXX=g++-12" >> $GITHUB_ENV
           echo "FC=gfortran-12" >> $GITHUB_ENV

      - name: Install Autotools Dependencies (Linux)
        run: |
           sudo apt install automake autoconf libtool libtool-bin
           sudo apt install libaec0 libaec-dev

      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - name: Get Sources
        uses: actions/checkout@v4.1.7

      # AUTOTOOLS CONFIGURE
      - name: Autotools Configure
        run: |
          sh ./autogen.sh
          mkdir "${{ runner.workspace }}/build"
          cd "${{ runner.workspace }}/build"
          $GITHUB_WORKSPACE/configure \
            --enable-build-mode=debug \
            --enable-deprecated-symbols \
            --with-default-api-version=v16 \
            --enable-shared \
            --disable-parallel \
            --enable-cxx \
            --enable-fortran \
            --enable-java \
            --enable-mirror-vfd \
            --enable-direct-vfd \
            --enable-ros3-vfd \
            --with-szlib=yes
        shell: bash

      # BUILD
      - name: Autotools Build
        run: make -j3
        working-directory: ${{ runner.workspace }}/build

      # INSTALL (note that this runs even when we don't run the tests)
      - name: Autotools Install
        run: make install
        working-directory: ${{ runner.workspace }}/build

      - name: Autotools Verify Install
        run: make check-install
        working-directory: ${{ runner.workspace }}/build

  build_v1_8:
    name: "gcc DBG v1.8 default API (build only)"
    runs-on: ubuntu-latest
    steps:
      # SETUP
      # Only CMake need ninja-build, but we just install it unilaterally
      # libssl, etc. are needed for the ros3 VFD
      - name: Install Linux Dependencies
        run: |
           sudo apt-get update
           sudo apt-get install ninja-build doxygen graphviz
           sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev
           sudo apt install gcc-12 g++-12 gfortran-12
           echo "CC=gcc-12" >> $GITHUB_ENV
           echo "CXX=g++-12" >> $GITHUB_ENV
           echo "FC=gfortran-12" >> $GITHUB_ENV

      - name: Install Autotools Dependencies (Linux)
        run: |
           sudo apt install automake autoconf libtool libtool-bin
           sudo apt install libaec0 libaec-dev

      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - name: Get Sources
        uses: actions/checkout@v4.1.7

      # AUTOTOOLS CONFIGURE
      - name: Autotools Configure
        run: |
          sh ./autogen.sh
          mkdir "${{ runner.workspace }}/build"
          cd "${{ runner.workspace }}/build"
          $GITHUB_WORKSPACE/configure \
            --enable-build-mode=debug \
            --enable-deprecated-symbols \
            --with-default-api-version=v18 \
            --enable-shared \
            --disable-parallel \
            --enable-cxx \
            --enable-fortran \
            --enable-java \
            --enable-mirror-vfd \
            --enable-direct-vfd \
            --enable-ros3-vfd \
            --with-szlib=yes
        shell: bash

      # BUILD
      - name: Autotools Build
        run: make -j3
        working-directory: ${{ runner.workspace }}/build

      # INSTALL (note that this runs even when we don't run the tests)
      - name: Autotools Install
        run: make install
        working-directory: ${{ runner.workspace }}/build

      - name: Autotools Verify Install
        run: make check-install
        working-directory: ${{ runner.workspace }}/build

  build_v1_10:
    name: "gcc DBG v1.10 default API (build only)"
    runs-on: ubuntu-latest
    steps:
      # SETUP
      # Only CMake need ninja-build, but we just install it unilaterally
      # libssl, etc. are needed for the ros3 VFD
      - name: Install Linux Dependencies
        run: |
           sudo apt-get update
           sudo apt-get install ninja-build doxygen graphviz
           sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev
           sudo apt install gcc-12 g++-12 gfortran-12
           echo "CC=gcc-12" >> $GITHUB_ENV
           echo "CXX=g++-12" >> $GITHUB_ENV
           echo "FC=gfortran-12" >> $GITHUB_ENV

      - name: Install Autotools Dependencies (Linux)
        run: |
           sudo apt install automake autoconf libtool libtool-bin
           sudo apt install libaec0 libaec-dev

      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - name: Get Sources
        uses: actions/checkout@v4.1.7

      # AUTOTOOLS CONFIGURE
      - name: Autotools Configure
        run: |
          sh ./autogen.sh
          mkdir "${{ runner.workspace }}/build"
          cd "${{ runner.workspace }}/build"
          $GITHUB_WORKSPACE/configure \
            --enable-build-mode=debug \
            --enable-deprecated-symbols \
            --with-default-api-version=v110 \
            --enable-shared \
            --disable-parallel \
            --enable-cxx \
            --enable-fortran \
            --enable-java \
            --enable-mirror-vfd \
            --enable-direct-vfd \
            --enable-ros3-vfd \
            --with-szlib=yes
        shell: bash

      # BUILD
      - name: Autotools Build
        run: make -j3
        working-directory: ${{ runner.workspace }}/build

      # INSTALL (note that this runs even when we don't run the tests)
      - name: Autotools Install
        run: make install
        working-directory: ${{ runner.workspace }}/build

      - name: Autotools Verify Install
        run: make check-install
        working-directory: ${{ runner.workspace }}/build

  build_v1_12:
    name: "gcc DBG v1.12 default API (build only)"
    runs-on: ubuntu-latest
    steps:
      # SETUP
      # Only CMake need ninja-build, but we just install it unilaterally
      # libssl, etc. are needed for the ros3 VFD
      - name: Install Linux Dependencies
        run: |
           sudo apt-get update
           sudo apt-get install ninja-build doxygen graphviz
           sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev
           sudo apt install gcc-12 g++-12 gfortran-12
           echo "CC=gcc-12" >> $GITHUB_ENV
           echo "CXX=g++-12" >> $GITHUB_ENV
           echo "FC=gfortran-12" >> $GITHUB_ENV

      - name: Install Autotools Dependencies (Linux)
        run: |
           sudo apt install automake autoconf libtool libtool-bin
           sudo apt install libaec0 libaec-dev

      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - name: Get Sources
        uses: actions/checkout@v4.1.7

      # AUTOTOOLS CONFIGURE
      - name: Autotools Configure
        run: |
          sh ./autogen.sh
          mkdir "${{ runner.workspace }}/build"
          cd "${{ runner.workspace }}/build"
          $GITHUB_WORKSPACE/configure \
            --enable-build-mode=debug \
            --enable-deprecated-symbols \
            --with-default-api-version=v112 \
            --enable-shared \
            --disable-parallel \
            --enable-cxx \
            --enable-fortran \
            --enable-java \
            --enable-mirror-vfd \
            --enable-direct-vfd \
            --enable-ros3-vfd \
            --with-szlib=yes
        shell: bash

      # BUILD
      - name: Autotools Build
        run: make -j3
        working-directory: ${{ runner.workspace }}/build

      # INSTALL (note that this runs even when we don't run the tests)
      - name: Autotools Install
        run: make install
        working-directory: ${{ runner.workspace }}/build

      - name: Autotools Verify Install
        run: make check-install
        working-directory: ${{ runner.workspace }}/build

  build_v1_14:
    name: "gcc DBG v1.14 default API (build only)"
    runs-on: ubuntu-latest
    steps:
      # SETUP
      # Only CMake need ninja-build, but we just install it unilaterally
      # libssl, etc. are needed for the ros3 VFD
      - name: Install Linux Dependencies
        run: |
           sudo apt-get update
           sudo apt-get install ninja-build doxygen graphviz
           sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev
           sudo apt install gcc-12 g++-12 gfortran-12
           echo "CC=gcc-12" >> $GITHUB_ENV
           echo "CXX=g++-12" >> $GITHUB_ENV
           echo "FC=gfortran-12" >> $GITHUB_ENV

      - name: Install Autotools Dependencies (Linux)
        run: |
           sudo apt install automake autoconf libtool libtool-bin
           sudo apt install libaec0 libaec-dev

      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - name: Get Sources
        uses: actions/checkout@v4.1.7

      # AUTOTOOLS CONFIGURE
      - name: Autotools Configure
        run: |
          sh ./autogen.sh
          mkdir "${{ runner.workspace }}/build"
          cd "${{ runner.workspace }}/build"
          $GITHUB_WORKSPACE/configure \
            --enable-build-mode=debug \
            --enable-deprecated-symbols \
            --with-default-api-version=v114 \
            --enable-shared \
            --disable-parallel \
            --enable-cxx \
            --enable-fortran \
            --enable-java \
            --enable-mirror-vfd \
            --enable-direct-vfd \
            --enable-ros3-vfd \
            --with-szlib=yes
        shell: bash

      # BUILD
      - name: Autotools Build
        run: make -j3
        working-directory: ${{ runner.workspace }}/build

      # INSTALL (note that this runs even when we don't run the tests)
      - name: Autotools Install
        run: make install
        working-directory: ${{ runner.workspace }}/build

      - name: Autotools Verify Install
        run: make check-install
        working-directory: ${{ runner.workspace }}/build

  build_no_deprecated:
    name: "gcc no deprecated symbols (build only)"
    runs-on: ubuntu-latest
    steps:
      # SETUP
      # Only CMake need ninja-build, but we just install it unilaterally
      # libssl, etc. are needed for the ros3 VFD
      - name: Install Linux Dependencies
        run: |
           sudo apt-get update
           sudo apt-get install ninja-build doxygen graphviz
           sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev
           sudo apt install gcc-12 g++-12 gfortran-12
           echo "CC=gcc-12" >> $GITHUB_ENV
           echo "CXX=g++-12" >> $GITHUB_ENV
           echo "FC=gfortran-12" >> $GITHUB_ENV

      - name: Install Autotools Dependencies (Linux)
        run: |
           sudo apt install automake autoconf libtool libtool-bin
           sudo apt install libaec0 libaec-dev

      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - name: Get Sources
        uses: actions/checkout@v4.1.7

      # AUTOTOOLS CONFIGURE
      - name: Autotools Configure
        run: |
          sh ./autogen.sh
          mkdir "${{ runner.workspace }}/build"
          cd "${{ runner.workspace }}/build"
          $GITHUB_WORKSPACE/configure \
            --enable-build-mode=debug \
            --disable-deprecated-symbols \
            --with-default-api-version=default \
            --enable-shared \
            --disable-parallel \
            --enable-cxx \
            --enable-fortran \
            --enable-java \
            --enable-mirror-vfd \
            --enable-direct-vfd \
            --enable-ros3-vfd \
            --with-szlib=yes
        shell: bash

      # BUILD
      - name: Autotools Build
        run: make -j3
        working-directory: ${{ runner.workspace }}/build

      # INSTALL (note that this runs even when we don't run the tests)
      - name: Autotools Install
        run: make install
        working-directory: ${{ runner.workspace }}/build

      - name: Autotools Verify Install
        run: make check-install
        working-directory: ${{ runner.workspace }}/build

  build_debug_werror:
    name: "gcc DBG -Werror (build only)"
    runs-on: ubuntu-latest
    steps:
      # SETUP
      # Only CMake need ninja-build, but we just install it unilaterally
      # libssl, etc. are needed for the ros3 VFD
      - name: Install Linux Dependencies
        run: |
           sudo apt-get update
           sudo apt-get install ninja-build doxygen graphviz
           sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev
           sudo apt install gcc-12 g++-12 gfortran-12
           echo "CC=gcc-12" >> $GITHUB_ENV
           echo "CXX=g++-12" >> $GITHUB_ENV
           echo "FC=gfortran-12" >> $GITHUB_ENV

      - name: Install Autotools Dependencies (Linux)
        run: |
           sudo apt install automake autoconf libtool libtool-bin
           sudo apt install libaec0 libaec-dev

      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - name: Get Sources
        uses: actions/checkout@v4.1.7

      # AUTOTOOLS CONFIGURE
      - name: Autotools Configure
        run: |
          sh ./autogen.sh
          mkdir "${{ runner.workspace }}/build"
          cd "${{ runner.workspace }}/build"
          CFLAGS=-Werror JAVACFLAGS=-Werror JNIFLAGS=-Werror \
          $GITHUB_WORKSPACE/configure \
            --enable-build-mode=debug \
            --enable-warnings-as-errors \
            --enable-deprecated-symbols \
            --with-default-api-version=v114 \
            --enable-shared \
            --disable-parallel \
            --enable-cxx \
            --disable-fortran \
            --enable-java \
            --enable-mirror-vfd \
            --enable-direct-vfd \
            --disable-ros3-vfd \
            --with-szlib=yes
        shell: bash

      # BUILD
      - name: Autotools Build
        run: make -j3
        working-directory: ${{ runner.workspace }}/build

      # INSTALL (note that this runs even when we don't run the tests)
      - name: Autotools Install
        run: make install
        working-directory: ${{ runner.workspace }}/build

      - name: Autotools Verify Install
        run: make check-install
        working-directory: ${{ runner.workspace }}/build

  build_release_werror:
    name: "gcc REL -Werror (build only)"
    runs-on: ubuntu-latest
    steps:
      # SETUP
      # Only CMake need ninja-build, but we just install it unilaterally
      # libssl, etc. are needed for the ros3 VFD
      - name: Install Linux Dependencies
        run: |
           sudo apt-get update
           sudo apt-get install ninja-build doxygen graphviz
           sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev
           sudo apt install gcc-12 g++-12 gfortran-12
           echo "CC=gcc-12" >> $GITHUB_ENV
           echo "CXX=g++-12" >> $GITHUB_ENV
           echo "FC=gfortran-12" >> $GITHUB_ENV

      - name: Install Autotools Dependencies (Linux)
        run: |
           sudo apt install automake autoconf libtool libtool-bin
           sudo apt install libaec0 libaec-dev

      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - name: Get Sources
        uses: actions/checkout@v4.1.7

      # AUTOTOOLS CONFIGURE
      - name: Autotools Configure
        run: |
          sh ./autogen.sh
          mkdir "${{ runner.workspace }}/build"
          cd "${{ runner.workspace }}/build"
          CFLAGS=-Werror JAVACFLAGS=-Werror JNIFLAGS=-Werror \
          $GITHUB_WORKSPACE/configure \
            --enable-build-mode=production \
            --enable-warnings-as-errors \
            --enable-deprecated-symbols \
            --with-default-api-version=v114 \
            --enable-shared \
            --disable-parallel \
            --enable-cxx \
            --disable-fortran \
            --enable-java \
            --enable-mirror-vfd \
            --enable-direct-vfd \
            --disable-ros3-vfd \
            --with-szlib=yes
        shell: bash

      # BUILD
      - name: Autotools Build
        run: make -j3
        working-directory: ${{ runner.workspace }}/build

      # INSTALL (note that this runs even when we don't run the tests)
      - name: Autotools Install
        run: make install
        working-directory: ${{ runner.workspace }}/build

      - name: Autotools Verify Install
        run: make check-install
        working-directory: ${{ runner.workspace }}/build