hdf5/test/h5test.h

204 lines
7.9 KiB
C
Raw Normal View History

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Copyright by The HDF Group. *
* Copyright by the Board of Trustees of the University of Illinois. *
* All rights reserved. *
* *
* This file is part of HDF5. The full HDF5 copyright notice, including *
* terms governing use, modification, and redistribution, is contained in *
* the files COPYING and Copyright.html. COPYING can be found at the root *
* of the source code distribution tree; Copyright.html can be found at the *
* root level of an installed copy of the electronic HDF5 document set and *
* is linked from the top-level documents page. It can also be found at *
* http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *
* access to either file, you may request a copy from help@hdfgroup.org. *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
[svn-r936] Changes since 19981119 ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
1998-11-21 11:36:51 +08:00
/*
* Programmer: Robb Matzke <matzke@llnl.gov>
* Friday, November 20, 1998
*
* Purpose: Test support stuff.
*/
#ifndef _H5TEST_H
#define _H5TEST_H
#include "hdf5.h"
#include "H5private.h"
[svn-r936] Changes since 19981119 ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
1998-11-21 11:36:51 +08:00
/*
* Predefined test verbosity levels.
*
* Convention:
*
* The higher the verbosity value, the more information printed.
* So, output for higher verbosity also include output of all lower
* verbosity.
*
* Value Description
* 0 None: No informational message.
* 1 "All tests passed"
* 2 Header of overall test
* 3 Default: header and results of individual test
* 4
* 5 Low: Major category of tests.
* 6
* 7 Medium: Minor category of tests such as functions called.
* 8
* 9 High: Highest level. All information.
*/
#define VERBO_NONE 0 /* None */
#define VERBO_DEF 3 /* Default */
#define VERBO_LO 5 /* Low */
#define VERBO_MED 7 /* Medium */
#define VERBO_HI 9 /* High */
/*
* Verbose queries
* Only None needs an exact match. The rest are at least as much.
*/
/* A macro version of HDGetTestVerbosity(). */
/* Should be used internally by the libtest.a only. */
#define HDGetTestVerbosity() (TestVerbosity)
#define VERBOSE_NONE (HDGetTestVerbosity()==VERBO_NONE)
#define VERBOSE_DEF (HDGetTestVerbosity()>=VERBO_DEF)
#define VERBOSE_LO (HDGetTestVerbosity()>=VERBO_LO)
#define VERBOSE_MED (HDGetTestVerbosity()>=VERBO_MED)
#define VERBOSE_HI (HDGetTestVerbosity()>=VERBO_HI)
/*
* Test controls definitions.
*/
#define SKIPTEST 1 /* Skip this test */
#define ONLYTEST 2 /* Do only this test */
#define BEGINTEST 3 /* Skip all tests before this test */
/*
* This contains the filename prefix specificied as command line option for
* the parallel test files.
*/
H5TEST_DLLVAR char *paraprefix;
#ifdef H5_HAVE_PARALLEL
H5TEST_DLLVAR MPI_Info h5_io_info_g; /* MPI INFO object for IO */
#endif
/*
* Print the current location on the standard output stream.
*/
#define AT() printf (" at %s:%d in %s()...\n", \
__FILE__, __LINE__, FUNC);
[svn-r936] Changes since 19981119 ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
1998-11-21 11:36:51 +08:00
/*
* The name of the test is printed by saying TESTING("something") which will
* result in the string `Testing something' being flushed to standard output.
* If a test passes, fails, or is skipped then the PASSED(), H5_FAILED(), or
* SKIPPED() macro should be called. After H5_FAILED() or SKIPPED() the caller
[svn-r936] Changes since 19981119 ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
1998-11-21 11:36:51 +08:00
* should print additional information to stdout indented by at least four
* spaces. If the h5_errors() is used for automatic error handling then
* the H5_FAILED() macro is invoked automatically when an API function fails.
[svn-r936] Changes since 19981119 ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
1998-11-21 11:36:51 +08:00
*/
#define TESTING(WHAT) {printf("Testing %-62s",WHAT); fflush(stdout);}
#define TESTING_2(WHAT) {printf(" Testing %-62s",WHAT); fflush(stdout);}
#define PASSED() {puts(" PASSED");fflush(stdout);}
#define H5_FAILED() {puts("*FAILED*");fflush(stdout);}
#define H5_WARNING() {puts("*WARNING*");fflush(stdout);}
#define SKIPPED() {puts(" -SKIP-");fflush(stdout);}
#define PUTS_ERROR(s) {puts(s); AT(); goto error;}
#define TEST_ERROR {H5_FAILED(); AT(); goto error;}
#define STACK_ERROR {H5Eprint2(H5E_DEFAULT, stdout); goto error;}
#define FAIL_STACK_ERROR {H5_FAILED(); AT(); H5Eprint2(H5E_DEFAULT, stdout); \
goto error;}
#define FAIL_PUTS_ERROR(s) {H5_FAILED(); AT(); puts(s); goto error;}
[svn-r936] Changes since 19981119 ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
1998-11-21 11:36:51 +08:00
/*
* Alarm definitions to wait up (terminate) a test that runs too long.
*/
#define H5_ALARM_SEC 1200 /* default is 20 minutes */
#define ALARM_ON TestAlarmOn()
#define ALARM_OFF HDalarm(0)
[svn-r936] Changes since 19981119 ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
1998-11-21 11:36:51 +08:00
#ifdef __cplusplus
extern "C" {
#endif
/* Generally useful testing routines */
H5TEST_DLL void h5_clean_files(const char *base_name[], hid_t fapl);
H5TEST_DLL int h5_cleanup(const char *base_name[], hid_t fapl);
H5TEST_DLL char *h5_fixname(const char *base_name, hid_t fapl, char *fullname, size_t size);
H5TEST_DLL char *h5_fixname_no_suffix(const char *base_name, hid_t fapl, char *fullname, size_t size);
H5TEST_DLL char *h5_fixname_printf(const char *base_name, hid_t fapl, char *fullname, size_t size);
H5TEST_DLL hid_t h5_fileaccess(void);
H5TEST_DLL void h5_no_hwconv(void);
H5TEST_DLL const char *h5_rmprefix(const char *filename);
H5TEST_DLL void h5_reset(void);
H5TEST_DLL void h5_restore_err(void);
H5TEST_DLL void h5_show_hostname(void);
H5TEST_DLL h5_stat_size_t h5_get_file_size(const char *filename, hid_t fapl);
H5TEST_DLL int print_func(const char *format, ...);
H5TEST_DLL int h5_make_local_copy(const char *origfilename, const char *local_copy_name);
H5TEST_DLL herr_t h5_verify_cached_stabs(const char *base_name[], hid_t fapl);
/* Functions that will replace VFD-dependent functions that violate
* the single responsibility principle. Unlike their predecessors,
* these new functions do not have hidden side effects.
*/
/* h5_fileaccess() replacement */
H5TEST_DLL hid_t h5_get_vfd_fapl(void);
/* h5_clean_files() replacements */
H5TEST_DLL void h5_delete_test_file(const char *base_name, hid_t fapl);
H5TEST_DLL void h5_delete_all_test_files(const char *base_name[], hid_t fapl);
/* h5_reset() replacement */
H5TEST_DLL void h5_test_init(void);
/* h5_cleanup() replacement */
H5TEST_DLL void h5_test_shutdown(void);
/* Routines for operating on the list of tests (for the "all in one" tests) */
H5TEST_DLL void TestUsage(void);
H5TEST_DLL void AddTest(const char *TheName, void (*TheCall) (void),
void (*Cleanup) (void), const char *TheDescr,
const void *Parameters);
H5TEST_DLL void TestInfo(const char *ProgName);
H5TEST_DLL void TestParseCmdLine(int argc, char *argv[]);
H5TEST_DLL void PerformTests(void);
H5TEST_DLL void TestSummary(void);
H5TEST_DLL void TestCleanup(void);
H5TEST_DLL void TestShutdown(void);
H5TEST_DLL void TestInit(const char *ProgName, void (*private_usage)(void), int (*private_parser)(int ac, char *av[]));
H5TEST_DLL int GetTestVerbosity(void);
H5TEST_DLL int SetTestVerbosity(int newval);
H5TEST_DLL int GetTestSummary(void);
H5TEST_DLL int GetTestCleanup(void);
H5TEST_DLL int SetTestNoCleanup(void);
H5TEST_DLL int GetTestExpress(void);
H5TEST_DLL int SetTestExpress(int newval);
H5TEST_DLL void ParseTestVerbosity(char *argv);
H5TEST_DLL int GetTestNumErrs(void);
H5TEST_DLL void IncTestNumErrs(void);
H5TEST_DLL const void *GetTestParameters(void);
H5TEST_DLL int TestErrPrintf(const char *format, ...) H5_ATTR_FORMAT(printf, 1, 2);
H5TEST_DLL void SetTest(const char *testname, int action);
H5TEST_DLL void TestAlarmOn(void);
H5TEST_DLL void TestAlarmOff(void);
#ifdef H5_HAVE_FILTER_SZIP
H5TEST_DLL int h5_szip_can_encode(void);
#endif /* H5_HAVE_FILTER_SZIP */
#ifdef H5_HAVE_PARALLEL
H5TEST_DLL int h5_set_info_object(void);
H5TEST_DLL void h5_dump_info_object(MPI_Info info);
H5TEST_DLL char* getenv_all(MPI_Comm comm, int root, const char* name);
#endif
[svn-r936] Changes since 19981119 ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
1998-11-21 11:36:51 +08:00
/* Extern global variables */
H5TEST_DLLVAR int TestVerbosity;
[svn-r936] Changes since 19981119 ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
1998-11-21 11:36:51 +08:00
#ifdef __cplusplus
}
#endif
#endif