mirror/hdf5
2
0
Fork 0
mirror of https://github.com/HDFGroup/hdf5.git synced 2025-01-18 15:15:56 +08:00
Code Issues Packages Projects Releases Wiki Activity
52a46001cb
hdf5/testpar/Makefile.in

67 lines
2.1 KiB
Makefile
Raw Normal View History

[svn-r1515] Changes since 19990715 ---------------------- ./Makefile.in [1.3] ./examples/Makefile.in [1.3] ./pablo/Makefile.in [1.3] ./src/Makefile.in [1.3] ./test/Makefile.in [1.3] ./testpar/Makefile.in [1.3] ./tools/Makefile.in [1.3] ./config/commence.in [1.3] ./config/conclude.in [1.3] ./config/depend.in [1.3] Added a `.PATH' target for Irix pmake which is identical to the VPATH used by most other `make' programs. Irix 6.5 (or 6.4?) and later `make' ignores VPATH. Started all beginning-of-line comments with `##' instead of just `#' because Irix `pmake' barfs on things like the following because it sees the `# if' as a directive: # make will barf on the following line # if running Irix pmake ./config/commence.in [1.3] Added empty definitions for optional `make' macros because Irix pmake complains if it sees a macro which has never been defined. The main body of the Makefiles can redefine these macros to whatever they need.
1999-07-20 03:56:57 +08:00
##
[svn-r6539] Purpose: Update Description: Updated (and in some cases added) the copyright statement. Platforms tested: Linux (Comment changes...only tested if they compile) Misc. update:
2003-04-01 02:02:10 +08:00
## Copyright by the Board of Trustees of the University of Illinois.
## All rights reserved.
##
## This file is part of HDF5. The full HDF5 copyright notice, including
## terms governing use, modification, and redistribution, is contained in
## the files COPYING and Copyright.html. COPYING can be found at the root
## of the source code distribution tree; Copyright.html can be found at the
## root level of an installed copy of the electronic HDF5 document set and
## is linked from the top-level documents page. It can also be found at
## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have
## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
[svn-r1515] Changes since 19990715 ---------------------- ./Makefile.in [1.3] ./examples/Makefile.in [1.3] ./pablo/Makefile.in [1.3] ./src/Makefile.in [1.3] ./test/Makefile.in [1.3] ./testpar/Makefile.in [1.3] ./tools/Makefile.in [1.3] ./config/commence.in [1.3] ./config/conclude.in [1.3] ./config/depend.in [1.3] Added a `.PATH' target for Irix pmake which is identical to the VPATH used by most other `make' programs. Irix 6.5 (or 6.4?) and later `make' ignores VPATH. Started all beginning-of-line comments with `##' instead of just `#' because Irix `pmake' barfs on things like the following because it sees the `# if' as a directive: # make will barf on the following line # if running Irix pmake ./config/commence.in [1.3] Added empty definitions for optional `make' macros because Irix pmake complains if it sees a macro which has never been defined. The main body of the Makefiles can redefine these macros to whatever they need.
1999-07-20 03:56:57 +08:00
##
[svn-r7361] Description: Updated the copyright notice--mostly by rearranging some text to make them consistent. Solution: Platforms tested: "h5committested"--sol is down, so, no SUn test. Misc. update:
2003-08-14 12:58:29 +08:00
## hdf5 Parallel Library Test Makefile(.in)
##
[svn-r1115] Changes since 19990302 ---------------------- ./INSTALL ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Improvements for parallel library. If you have a properly working mpicc you should be able to just say: $ CC=mpicc ./configure and you will see checking for mpirun... /usr/local/mpi/bin/mpirun checking for parallel support files... skipped checking how to run on one processor... /usr/local/mpi/bin/mpirun -np 1 checking how to run in parallel... /usr/local/mpi/bin/mpirun -np $$NPROCS To quote from the INSTALL file.... *** Parallel vs. serial library The HDF5 library can be configured to use MPI and MPI-IO for parallelizm on a distributed multi-processor system. The easy way to do this is to have a properly installed parallel compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that executable as the value of the CC environment variable: [NOTE: mpcc is not tested yet] $ CC=mpcc ./configure $ CC=/usr/local/mpi/bin/mpicc ./configure If no such wrapper script is available then you must specify your normal C compiler along with the distribution of MPI/MPI-IO which is to be used (values other than `mpich' will be added at a later date): $ ./configure --enable-parallel=mpich If the MPI/MPI-IO include files and/or libraries cannot be found by the compiler then their directories must be given as arguments to CPPFLAGS and/or LDFLAGS: $ CPPFLAGS=-I/usr/local/mpi/include \ LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \ ./configure --enable-parallel=mpich If a parallel library is being built then configure attempts to determine how to run a parallel application on one processor and on many processors. If the compiler is mpicc and the user hasn't specified values for RUNSERIAL and RUNPARALLEL then configure chooses `mpirun' from the same directory as `mpicc': RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1 RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2} The `$${NPROCS:=2}' will be substituted with the value of the NPROCS environment variable at the time `make check' is run (or the value 2). ./testpar/Makefile.in Saying `make check' (or `make test') will run the tests on two processors by default. If you define NPROCS then that many processors are used instead: $ NPROCS=4 make check ./configure.in Fixed (hopefully) bugs with detecting whether __attribute__ and __FUNCTION__ are special keywords for the compiler. ./Makefile.in Saying `make install' from the top level directory shows instructions for using shared libraries. ./config/commence.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Moved the @top_srcdir@ into the makefiles because it was expanded too early and had the wrong value. ./INSTALL Added a warning that if the wrong version of hdf4 tools are installed then `make check' will fail in the tools directory.
1999-03-04 07:17:48 +08:00
top_srcdir=@top_srcdir@
[svn-r1151] Changes since 19990318 ---------------------- ./Makefile.in ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./config/commence.in ./config/conclude.in ./config/dec-osf4.x ./config/depend.in ./config/freebsd ./config/linux-gnu ./config/linux-gnulibc1 ./config/linux-gnulibc2 ./config/solaris2.x ./examples/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./tools/testh5dump.sh Changes that allow hdf5 to be configured and compiled in a directory other than the source directory. This is especially useful if you want to concurrently compile with different compilers and/or compile flags, or if the hdf5 source is on read-only media like a CDROM. The changes were surprisingly easy ;-) Here's what you can do now... $ mkdir /tmp/build1 # or something $ cd /tmp/build1 $ /cdrom/hdf5/configure # where ever the source is $ make Paul, you'll have to change the testh5toh4 script similar to the way I changed testh5dump.sh. I started working on it but then gave up because of a number of problems: (1) I had to comment out all the tests that let h5toh4 choose the output file name because it always tried to put the output file in the same directory as the input file, (2) if path names are used during the h4 dump then they interfere with the diff. The test works fine when run in the source directory, but try this instead: $ gunzip <hdf5-1.1.67.tar.gz |tar xf - $ chmod -R ugo-w hdf5-1.1.67 $ mkdir build $ cd build $ ../hdf5-1.1.67/configure $ make check Dan, I didn't modify the pablo/Makefile.in because I have no way to test it. I think all you need to do is add a couple lines before the @COMMENCE@ line and add a couple search directories for header files. Anyway, it seems like almost an exact duplicate of the src/Makefile.in, so it shouldn't be a problem... ./Makefile.in Removes a few more temporary files during make clean and distclean. ./configure.in I fixed the creation of the time-stamp files so that the initial make doesn't have to regenerated all the makefiles (only GNU make users will see any change). ./src/H5R.c Changed a return type from `intn' to `int' for an API function. ./src/H5detect.c Added the volatile qualifier to a couple more variables. ./tools/h5tools.c Fixed a compiler warning about an unused local. ./tools/h5toh4.c Initialized `optind' to 1 because it's zero on my system. It should always be one on a unix system. ./tools/testh5toh4 Redirected "broken pipe" messages to /dev/null so outut is formatted correctly.
1999-03-20 04:09:50 +08:00
top_builddir=..
srcdir=@srcdir@
@COMMENCE@
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
[svn-r1515] Changes since 19990715 ---------------------- ./Makefile.in [1.3] ./examples/Makefile.in [1.3] ./pablo/Makefile.in [1.3] ./src/Makefile.in [1.3] ./test/Makefile.in [1.3] ./testpar/Makefile.in [1.3] ./tools/Makefile.in [1.3] ./config/commence.in [1.3] ./config/conclude.in [1.3] ./config/depend.in [1.3] Added a `.PATH' target for Irix pmake which is identical to the VPATH used by most other `make' programs. Irix 6.5 (or 6.4?) and later `make' ignores VPATH. Started all beginning-of-line comments with `##' instead of just `#' because Irix `pmake' barfs on things like the following because it sees the `# if' as a directive: # make will barf on the following line # if running Irix pmake ./config/commence.in [1.3] Added empty definitions for optional `make' macros because Irix pmake complains if it sees a macro which has never been defined. The main body of the Makefiles can redefine these macros to whatever they need.
1999-07-20 03:56:57 +08:00
## Add the include directory to the C preprocessor flags the the hdf5 library
## to the library list.
[svn-r1947] Changed the test files prefix to use the h5_fixname() in test/libh5test.a. Makefile.in: Added test/ as one of the -I directories to search for header files. Needed because <h5test.h> is used. t_file.c t_mpi.c testphdf5.c testphdf5.h: Added FILENAME to meet the assumption in h5test.h. (May use CLEANUP in the future.) Moved the prefix setting to the h5_fixname().
2000-01-26 12:33:38 +08:00
CPPFLAGS=-I. -I$(srcdir) -I../src -I$(top_srcdir)/src -I$(top_srcdir)/test @CPPFLAGS@
[svn-r1149] ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5private.h Temporarily commented out the code that tries to link a simple MPI-IO application because I'm not sure how to pass $LDFLAGS and $LIBS to the compiler. Removed the `--enable-parallel=ibm' switch because the library we link with is either -lmpcc or -lmpcc_r but not both. The only way to tell is to see what compiler was specified (mpcc or mpcc_r) but if that compiler is specified then we don't need any libraries (the compiler script supplies them). That leaves just two choices: the user must use a compiler script: CC=mpcc ./configure or the user must state which library is desired: LDFLAGS='-lmpcc' ./configure --enable-parallel Checks for <setjmp.h>, longjmp(), and signal(). We don't check for setjmp() because it could be a macro (in fact, Posix requires it to be a macro) and if longjmp() is present then setjmp() is probably present too ;-) ./src/H5detect.c The alignment detection loop uses SIGBUS and setjmp/longjmp instead of fork/wait in order to get around bugs with forking in conjunction with mpich. This hasn't been tested on the SP-2 yet but it does work on the DEC Alpha. ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Changed the order that libraries are linked so -lhdf5 is always before $LDFLAGS.
1999-03-18 21:42:52 +08:00
LIBHDF5=../src/libhdf5.la
[svn-r1883] Added libh5test.a links so that parallel tests may make use of routines in the other test library.
1999-12-17 22:54:30 +08:00
LIBH5TEST=../test/libh5test.la
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
[svn-r1515] Changes since 19990715 ---------------------- ./Makefile.in [1.3] ./examples/Makefile.in [1.3] ./pablo/Makefile.in [1.3] ./src/Makefile.in [1.3] ./test/Makefile.in [1.3] ./testpar/Makefile.in [1.3] ./tools/Makefile.in [1.3] ./config/commence.in [1.3] ./config/conclude.in [1.3] ./config/depend.in [1.3] Added a `.PATH' target for Irix pmake which is identical to the VPATH used by most other `make' programs. Irix 6.5 (or 6.4?) and later `make' ignores VPATH. Started all beginning-of-line comments with `##' instead of just `#' because Irix `pmake' barfs on things like the following because it sees the `# if' as a directive: # make will barf on the following line # if running Irix pmake ./config/commence.in [1.3] Added empty definitions for optional `make' macros because Irix pmake complains if it sees a macro which has never been defined. The main body of the Makefiles can redefine these macros to whatever they need.
1999-07-20 03:56:57 +08:00
## These tests are parallel
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
RUNTEST=$(RUNPARALLEL)
[svn-r5795] Purpose: New feature Description: Changed parallel I/O tests to use test script instead of just running testphdf5 executable. This allows the MPI-posix driver to be tested easily. Platforms tested: FreeBSD 4.6 (sleipnir) w/parallel and IRIX64 6.5 (modi4) w/parallel
2002-07-15 23:17:05 +08:00
## Test programs and scripts.
##
[svn-r6709] Purpose: Bug fixes/API changes Description: Previously, the Communicator and Info object arguments supplied to H5Pset_fapl_mpio() are stored in the property with its handle values. This meant changes to the communicator or the Info object after calling H5Pset_fapl_mpio would affect the how the property list function. This was also the case when H5Fopen/create operated. They just stored the handle value. This is not according to the MPI-2 defined behavior of how Info objects should be handled. (MPI-2 defines Info objects must be parsed when called.) The old design was trying to avoid numerous duplicates of the same information (e.g., every property object holds one version, every file opened holds another version, when all of them are referring to the same original version.) Nevertheless it is safer to implement it according to MPI-2 definition. Futhermore, the library often needs to do message passing using the supplied communicator. Using the same communicator as the application version may result in some messages mix up. Solution: H5Pset_fapl_mpio now stores a duplicate of each of the communicator and Info object. H5Pget_fapl_mpio returns a duplicate of its stored communicator and Info object. It is now the responsibility of the applications to free those objects when done. H5Fopen/create also stores a duplicate of the communicator and Info object supplied by the File Access Property list. H5Fclose frees those duplicates. There are a few more internal VFL call back functions that they follow this "make duplicates" requirement. Platforms tested: "h5committested". What other platforms/configurations were tested? Eirene (mpicc), sol(mpicc), copper(parallel) Misc. update: Need to update MANIFEST for the added t_ph5basic.c which tests the correctness of duplicated communicator and INFO object.
2003-04-18 11:04:56 +08:00
TEST_PROGS_PARA=t_mpi t_fphdf5
[svn-r5795] Purpose: New feature Description: Changed parallel I/O tests to use test script instead of just running testphdf5 executable. This allows the MPI-posix driver to be tested easily. Platforms tested: FreeBSD 4.6 (sleipnir) w/parallel and IRIX64 6.5 (modi4) w/parallel
2002-07-15 23:17:05 +08:00
TEST_SCRIPTS=testph5.sh
[svn-r1515] Changes since 19990715 ---------------------- ./Makefile.in [1.3] ./examples/Makefile.in [1.3] ./pablo/Makefile.in [1.3] ./src/Makefile.in [1.3] ./test/Makefile.in [1.3] ./testpar/Makefile.in [1.3] ./tools/Makefile.in [1.3] ./config/commence.in [1.3] ./config/conclude.in [1.3] ./config/depend.in [1.3] Added a `.PATH' target for Irix pmake which is identical to the VPATH used by most other `make' programs. Irix 6.5 (or 6.4?) and later `make' ignores VPATH. Started all beginning-of-line comments with `##' instead of just `#' because Irix `pmake' barfs on things like the following because it sees the `# if' as a directive: # make will barf on the following line # if running Irix pmake ./config/commence.in [1.3] Added empty definitions for optional `make' macros because Irix pmake complains if it sees a macro which has never been defined. The main body of the Makefiles can redefine these macros to whatever they need.
1999-07-20 03:56:57 +08:00
## These are our main targets
[svn-r5815] Purpose: Bug fix Description: t_mpi test program was not being run with the RUNPARALLEL command Solution: Put the t_mpi program into the TEST_PROGS_PARA macro instead of the TEST_PROGS macro Hopefully this'll fix the daily test problems on arabica, but I can't test it because I can't get mpirun to work correctly for me. Platforms tested: IRIX64 6.5 (modi4) w/parallel
2002-07-20 04:09:16 +08:00
PROGS=$(TEST_PROGS_PARA) testphdf5
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
[svn-r1515] Changes since 19990715 ---------------------- ./Makefile.in [1.3] ./examples/Makefile.in [1.3] ./pablo/Makefile.in [1.3] ./src/Makefile.in [1.3] ./test/Makefile.in [1.3] ./testpar/Makefile.in [1.3] ./tools/Makefile.in [1.3] ./config/commence.in [1.3] ./config/conclude.in [1.3] ./config/depend.in [1.3] Added a `.PATH' target for Irix pmake which is identical to the VPATH used by most other `make' programs. Irix 6.5 (or 6.4?) and later `make' ignores VPATH. Started all beginning-of-line comments with `##' instead of just `#' because Irix `pmake' barfs on things like the following because it sees the `# if' as a directive: # make will barf on the following line # if running Irix pmake ./config/commence.in [1.3] Added empty definitions for optional `make' macros because Irix pmake complains if it sees a macro which has never been defined. The main body of the Makefiles can redefine these macros to whatever they need.
1999-07-20 03:56:57 +08:00
## Temporary files
[svn-r7396] Purpose: Bug fix Description: Temporary files were not cleaned out because the definiton of temporary files had not been updated. Solution: Updated it. Platforms tested: Tested by hand in Copper while i was testing the MPE change. Misc. update:
2003-08-24 14:00:54 +08:00
## MPItest.h5 is from t_mpi
## Para*.h5 are from testphdf
## *.clog are from MPE option
MOSTLYCLEAN=MPItest.h5 Para*.h5 *.clog
[svn-r5795] Purpose: New feature Description: Changed parallel I/O tests to use test script instead of just running testphdf5 executable. This allows the MPI-posix driver to be tested easily. Platforms tested: FreeBSD 4.6 (sleipnir) w/parallel and IRIX64 6.5 (modi4) w/parallel
2002-07-15 23:17:05 +08:00
DISTCLEAN=go Makefile testph5.sh
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
[svn-r1515] Changes since 19990715 ---------------------- ./Makefile.in [1.3] ./examples/Makefile.in [1.3] ./pablo/Makefile.in [1.3] ./src/Makefile.in [1.3] ./test/Makefile.in [1.3] ./testpar/Makefile.in [1.3] ./tools/Makefile.in [1.3] ./config/commence.in [1.3] ./config/conclude.in [1.3] ./config/depend.in [1.3] Added a `.PATH' target for Irix pmake which is identical to the VPATH used by most other `make' programs. Irix 6.5 (or 6.4?) and later `make' ignores VPATH. Started all beginning-of-line comments with `##' instead of just `#' because Irix `pmake' barfs on things like the following because it sees the `# if' as a directive: # make will barf on the following line # if running Irix pmake ./config/commence.in [1.3] Added empty definitions for optional `make' macros because Irix pmake complains if it sees a macro which has never been defined. The main body of the Makefiles can redefine these macros to whatever they need.
1999-07-20 03:56:57 +08:00
## Test source files
[svn-r6709] Purpose: Bug fixes/API changes Description: Previously, the Communicator and Info object arguments supplied to H5Pset_fapl_mpio() are stored in the property with its handle values. This meant changes to the communicator or the Info object after calling H5Pset_fapl_mpio would affect the how the property list function. This was also the case when H5Fopen/create operated. They just stored the handle value. This is not according to the MPI-2 defined behavior of how Info objects should be handled. (MPI-2 defines Info objects must be parsed when called.) The old design was trying to avoid numerous duplicates of the same information (e.g., every property object holds one version, every file opened holds another version, when all of them are referring to the same original version.) Nevertheless it is safer to implement it according to MPI-2 definition. Futhermore, the library often needs to do message passing using the supplied communicator. Using the same communicator as the application version may result in some messages mix up. Solution: H5Pset_fapl_mpio now stores a duplicate of each of the communicator and Info object. H5Pget_fapl_mpio returns a duplicate of its stored communicator and Info object. It is now the responsibility of the applications to free those objects when done. H5Fopen/create also stores a duplicate of the communicator and Info object supplied by the File Access Property list. H5Fclose frees those duplicates. There are a few more internal VFL call back functions that they follow this "make duplicates" requirement. Platforms tested: "h5committested". What other platforms/configurations were tested? Eirene (mpicc), sol(mpicc), copper(parallel) Misc. update: Need to update MANIFEST for the added t_ph5basic.c which tests the correctness of duplicated communicator and INFO object.
2003-04-18 11:04:56 +08:00
TEST_PHDF5_SRC=testphdf5.c t_dset.c t_file.c t_mdset.c t_ph5basic.c
[svn-r2710] Purpose: Features, kind of. Description: Separated the MPI features test into its own independent program so that it can be tested on its own without too much HDF5 stuff involved. Added automatic removal of temporary test files after the tests completed. Reduced the size of the dataset dimensions to avoid tripping the SGI MPI problems of running out of internal mpi type entries. Platforms tested: O2K -64
2000-10-20 14:19:21 +08:00
TEST_PHDF5_OBJ=$(TEST_PHDF5_SRC:.c=.lo)
[svn-r6718] Purpose: bug fix Description: The fphdf5.o and similar files are not included in the make clean target. So, if the same directory is used again for a different build, the left behind file could cause a problem (e.g., if the second build is for a different binary format.) Solution: Added fphdf5.c to the TEST_SRC list which indirect form the clean target list. Platforms tested: Did not run h5committest tests because they don't verify this failure. I tested the fix in modi4 pp to verify all files are cleaned. Misc. update:
2003-04-20 10:10:15 +08:00
TEST_SRC=t_mpi.c t_fphdf5.c $(TEST_PHDF5_SRC)
[svn-r1217] Changes since 19990426 ---------------------- ./config/commence.in ./examples/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Fixed some dependency problems in Makefiles. If the library version is updated then everything gets recompiled. ./src/H5G.c ./src/H5R.c Failure return value for object type functions is now H5G_UNKNOWN as documented. ./src/H5Shyper.c ./src/H5Spoint.c Fixed an unused argument warning. ./tools/h5debug.c Fixed a call to H5F_block_read() since the 4th argument is different now. ./tools/h5ls.c Added a space between the object name and class to make the output readable when the object name is longer than 24 characters. C
1999-04-26 22:43:53 +08:00
TEST_OBJ=$(TEST_SRC:.c=.lo)
[svn-r1398] Purpose: new feature Makefile.in: Added the dependence of *.c on the testphdf5.h t_dset.c: testphdf5.c: testphdf5.h: testphdf5 now takes optional arguements for dataset dimension sizes. That allows testing with different dimension sizes without recompiling the whole thing. Platform tested: O2K
1999-07-01 06:04:22 +08:00
TEST_HDR=testphdf5.h
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
[svn-r1515] Changes since 19990715 ---------------------- ./Makefile.in [1.3] ./examples/Makefile.in [1.3] ./pablo/Makefile.in [1.3] ./src/Makefile.in [1.3] ./test/Makefile.in [1.3] ./testpar/Makefile.in [1.3] ./tools/Makefile.in [1.3] ./config/commence.in [1.3] ./config/conclude.in [1.3] ./config/depend.in [1.3] Added a `.PATH' target for Irix pmake which is identical to the VPATH used by most other `make' programs. Irix 6.5 (or 6.4?) and later `make' ignores VPATH. Started all beginning-of-line comments with `##' instead of just `#' because Irix `pmake' barfs on things like the following because it sees the `# if' as a directive: # make will barf on the following line # if running Irix pmake ./config/commence.in [1.3] Added empty definitions for optional `make' macros because Irix pmake complains if it sees a macro which has never been defined. The main body of the Makefiles can redefine these macros to whatever they need.
1999-07-20 03:56:57 +08:00
## How to build the tests... They all depend on the hdf5 library
[svn-r5795] Purpose: New feature Description: Changed parallel I/O tests to use test script instead of just running testphdf5 executable. This allows the MPI-posix driver to be tested easily. Platforms tested: FreeBSD 4.6 (sleipnir) w/parallel and IRIX64 6.5 (modi4) w/parallel
2002-07-15 23:17:05 +08:00
$(PROGS): $(LIBHDF5) $(LIBH5TEST)
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
[svn-r1398] Purpose: new feature Makefile.in: Added the dependence of *.c on the testphdf5.h t_dset.c: testphdf5.c: testphdf5.h: testphdf5 now takes optional arguements for dataset dimension sizes. That allows testing with different dimension sizes without recompiling the whole thing. Platform tested: O2K
1999-07-01 06:04:22 +08:00
$(TEST_OBJ): $(TEST_HDR)
[svn-r2710] Purpose: Features, kind of. Description: Separated the MPI features test into its own independent program so that it can be tested on its own without too much HDF5 stuff involved. Added automatic removal of temporary test files after the tests completed. Reduced the size of the dataset dimensions to avoid tripping the SGI MPI problems of running out of internal mpi type entries. Platforms tested: O2K -64
2000-10-20 14:19:21 +08:00
[svn-r6709] Purpose: Bug fixes/API changes Description: Previously, the Communicator and Info object arguments supplied to H5Pset_fapl_mpio() are stored in the property with its handle values. This meant changes to the communicator or the Info object after calling H5Pset_fapl_mpio would affect the how the property list function. This was also the case when H5Fopen/create operated. They just stored the handle value. This is not according to the MPI-2 defined behavior of how Info objects should be handled. (MPI-2 defines Info objects must be parsed when called.) The old design was trying to avoid numerous duplicates of the same information (e.g., every property object holds one version, every file opened holds another version, when all of them are referring to the same original version.) Nevertheless it is safer to implement it according to MPI-2 definition. Futhermore, the library often needs to do message passing using the supplied communicator. Using the same communicator as the application version may result in some messages mix up. Solution: H5Pset_fapl_mpio now stores a duplicate of each of the communicator and Info object. H5Pget_fapl_mpio returns a duplicate of its stored communicator and Info object. It is now the responsibility of the applications to free those objects when done. H5Fopen/create also stores a duplicate of the communicator and Info object supplied by the File Access Property list. H5Fclose frees those duplicates. There are a few more internal VFL call back functions that they follow this "make duplicates" requirement. Platforms tested: "h5committested". What other platforms/configurations were tested? Eirene (mpicc), sol(mpicc), copper(parallel) Misc. update: Need to update MANIFEST for the added t_ph5basic.c which tests the correctness of duplicated communicator and INFO object.
2003-04-18 11:04:56 +08:00
t_fphdf5: t_fphdf5.lo
@$(LT_LINK_EXE) $(CFLAGS) -o $@ t_fphdf5.lo $(LIBH5TEST) $(LIBHDF5) $(LDFLAGS) $(LIBS)
[svn-r2710] Purpose: Features, kind of. Description: Separated the MPI features test into its own independent program so that it can be tested on its own without too much HDF5 stuff involved. Added automatic removal of temporary test files after the tests completed. Reduced the size of the dataset dimensions to avoid tripping the SGI MPI problems of running out of internal mpi type entries. Platforms tested: O2K -64
2000-10-20 14:19:21 +08:00
t_mpi: t_mpi.lo
@$(LT_LINK_EXE) $(CFLAGS) -o $@ t_mpi.lo $(LIBH5TEST) $(LIBHDF5) $(LDFLAGS) $(LIBS)
testphdf5: $(TEST_PHDF5_OBJ)
@$(LT_LINK_EXE) $(CFLAGS) -o $@ $(TEST_PHDF5_OBJ) $(LIBH5TEST) $(LIBHDF5) $(LDFLAGS) $(LIBS)
[svn-r907] Changes since 19981111 ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
1998-11-13 23:06:06 +08:00
@CONCLUDE@
Reference in New Issue Copy Permalink