hdf5/hl/Makefile.in

1377 lines
47 KiB
Makefile
Raw Normal View History

# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
#
#
# This makefile mostly just reinvokes make in the various subdirectories
# but does so in the correct order. You can alternatively invoke make from
# each subdirectory manually.
#
# HDF5 High-Level Makefile(.in)
VPATH = @srcdir@
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(top_srcdir)/config/commence.am \
$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
$(top_srcdir)/bin/test-driver COPYING
TESTS =
subdir = hl
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/H5config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
check recheck distdir
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__tty_colors_dummy = \
mgn= red= grn= lgn= blu= brg= std=; \
am__color_tests=no
am__tty_colors = { \
$(am__tty_colors_dummy); \
if test "X$(AM_COLOR_TESTS)" = Xno; then \
am__color_tests=no; \
elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
am__color_tests=yes; \
elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
am__color_tests=yes; \
fi; \
if test $$am__color_tests = yes; then \
red=''; \
grn=''; \
lgn=''; \
blu=''; \
mgn=''; \
brg=''; \
std=''; \
fi; \
}
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__recheck_rx = ^[ ]*:recheck:[ ]*
am__global_test_result_rx = ^[ ]*:global-test-result:[ ]*
am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
recheck = 1; \
while ((rc = (getline line < ($$0 ".trs"))) != 0) \
{ \
if (rc < 0) \
{ \
if ((getline line2 < ($$0 ".log")) < 0) \
recheck = 0; \
break; \
} \
else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
{ \
recheck = 0; \
break; \
} \
else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
{ \
break; \
} \
}; \
if (recheck) \
print $$0; \
close ($$0 ".trs"); \
close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
print "fatal: making $@: " msg | "cat >&2"; \
exit 1; \
} \
function rst_section(header) \
{ \
print header; \
len = length(header); \
for (i = 1; i <= len; i = i + 1) \
printf "="; \
printf "\n\n"; \
} \
{ \
copy_in_global_log = 1; \
global_test_result = "RUN"; \
while ((rc = (getline line < ($$0 ".trs"))) != 0) \
{ \
if (rc < 0) \
fatal("failed to read from " $$0 ".trs"); \
if (line ~ /$(am__global_test_result_rx)/) \
{ \
sub("$(am__global_test_result_rx)", "", line); \
sub("[ ]*$$", "", line); \
global_test_result = line; \
} \
else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
copy_in_global_log = 0; \
}; \
if (copy_in_global_log) \
{ \
rst_section(global_test_result ": " $$0); \
while ((rc = (getline line < ($$0 ".log"))) != 0) \
{ \
if (rc < 0) \
fatal("failed to read from " $$0 ".log"); \
print line; \
}; \
printf "\n"; \
}; \
close ($$0 ".trs"); \
close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
--color-tests "$$am__color_tests" \
--enable-hard-errors "$$am__enable_hard_errors" \
--expect-failure "$$am__expect_failure"
# To be inserted before the command running the test. Creates the
# directory for the log if needed. Stores in $dir the directory
# containing $f, in $tst the test, in $log the log. Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup); \
$(am__vpath_adj_setup) $(am__vpath_adj) \
$(am__tty_colors); \
srcdir=$(srcdir); export srcdir; \
case "$@" in \
*/*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
*) am__odir=.;; \
esac; \
test "x$$am__odir" = x"." || test -d "$$am__odir" \
|| $(MKDIR_P) "$$am__odir" || exit $$?; \
if test -f "./$$f"; then dir=./; \
elif test -f "$$f"; then dir=; \
else dir="$(srcdir)/"; fi; \
tst=$$dir$$f; log='$@'; \
if test -n '$(DISABLE_HARD_ERRORS)'; then \
am__enable_hard_errors=no; \
else \
am__enable_hard_errors=yes; \
fi; \
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
am__expect_failure=yes;; \
*) \
am__expect_failure=no;; \
esac; \
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed). The result is saved in the shell variable
# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
bases='$(TEST_LOGS)'; \
bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.sh.log=.log)
SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
am__set_b = \
case '$@' in \
*/*) \
case '$*' in \
*/*) b='$*';; \
*) b=`echo '$@' | sed 's/\.log$$//'`; \
esac;; \
*) \
b='$*';; \
esac
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMTAR = @AMTAR@
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
# H5_CFLAGS holds flags that should be used when building hdf5,
# but which should not be exported to h5cc for building other programs.
# AM_CFLAGS is an automake construct which should be used by Makefiles
# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BYTESEX = @BYTESEX@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_VERSION = @CC_VERSION@
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
CFLAGS = @CFLAGS@
CLEARFILEBUF = @CLEARFILEBUF@
CODESTACK = @CODESTACK@
CONFIG_DATE = @CONFIG_DATE@
CONFIG_MODE = @CONFIG_MODE@
CONFIG_USER = @CONFIG_USER@
CPP = @CPP@
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
CXXFLAGS = @CXXFLAGS@
CXX_VERSION = @CXX_VERSION@
CYGPATH_W = @CYGPATH_W@
DEBUG_PKG = @DEBUG_PKG@
DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
DIRECT_VFD = @DIRECT_VFD@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
# Make sure that these variables are exported to the Makefiles
F9XMODEXT = @F9XMODEXT@
F9XMODFLAG = @F9XMODFLAG@
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
FC = @FC@
FC2003 = @FC2003@
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
FCFLAGS = @FCFLAGS@
FCFLAGS_f90 = @FCFLAGS_f90@
FCLIBS = @FCLIBS@
FC_VERSION = @FC_VERSION@
FGREP = @FGREP@
FSEARCH_DIRS = @FSEARCH_DIRS@
GREP = @GREP@
H5_CFLAGS = @H5_CFLAGS@
H5_CPPFLAGS = @H5_CPPFLAGS@
H5_CXXFLAGS = @H5_CXXFLAGS@
H5_FCFLAGS = @H5_FCFLAGS@
H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
H5_LDFLAGS = @H5_LDFLAGS@
H5_VERSION = @H5_VERSION@
HADDR_T = @HADDR_T@
HAVE_DMALLOC = @HAVE_DMALLOC@
HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@
HAVE_PTHREAD = @HAVE_PTHREAD@
HDF5_HL = @HDF5_HL@
HDF5_INTERFACES = @HDF5_INTERFACES@
HDF_CXX = @HDF_CXX@
HDF_FORTRAN = @HDF_FORTRAN@
HDF_FORTRAN2003 = @HDF_FORTRAN2003@
HID_T = @HID_T@
HL = @HL@
HL_FOR = @HL_FOR@
HSIZE_T = @HSIZE_T@
HSSIZE_T = @HSSIZE_T@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTRUMENT = @INSTRUMENT@
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LL_PATH = @LL_PATH@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_STATIC_EXEC = @LT_STATIC_EXEC@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MPE = @MPE@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PARALLEL = @PARALLEL@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
RANLIB = @RANLIB@
ROOT = @ROOT@
RUNPARALLEL = @RUNPARALLEL@
RUNSERIAL = @RUNSERIAL@
R_INTEGER = @R_INTEGER@
R_LARGE = @R_LARGE@
SEARCH = @SEARCH@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIZE_T = @SIZE_T@
STATIC_EXEC = @STATIC_EXEC@
STATIC_SHARED = @STATIC_SHARED@
STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
STRIP = @STRIP@
TESTPARALLEL = @TESTPARALLEL@
THREADSAFE = @THREADSAFE@
TIME = @TIME@
TR = @TR@
TRACE_API = @TRACE_API@
UNAME_INFO = @UNAME_INFO@
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
USE_FILTER_SZIP = @USE_FILTER_SZIP@
USINGMEMCHECKER = @USINGMEMCHECKER@
VERSION = @VERSION@
WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
ac_ct_FC = @ac_ct_FC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
# Install directories that automake doesn't know about
docdir = $(exec_prefix)/doc
dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
# Shell commands used in Makefiles
RM = rm -f
CP = cp
# Some machines need a command to run executables; this is that command
# so that our tests will run.
# We use RUNEXEC instead of RUNSERIAL directly because it may be that
# some tests need to be run with a different command. Older versions
# of the makefiles used the command
# $(LIBTOOL) --mode=execute
# in some directories, for instance.
RUNEXEC = $(RUNSERIAL)
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below
# has been removed. According to the official description of DESTDIR by Gnu at
# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is
# prepended to the normal and complete install path that it precedes for the
# purpose of installing in a temporary directory which is useful for building
# rpms and other packages. The '/' after ${DESTDIR} will be followed by another
# '/' at the beginning of the normal install path. When DESTDIR is empty the
# path then begins with '//', which is incorrect and causes problems at least for
# Cygwin.
# Scripts used to build examples
# If only shared libraries have been installed, have h5cc build examples with
# shared libraries instead of static libraries
H5CC = ${DESTDIR}$(bindir)/h5cc
H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
H5FC = ${DESTDIR}$(bindir)/h5fc
H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
H5CPP = ${DESTDIR}$(bindir)/h5c++
ACLOCAL_AMFLAGS = "-I m4"
# The trace script; this is used on source files from the C library to
# insert tracing macros.
TRACE = perl $(top_srcdir)/bin/trace
# .chkexe files are used to mark tests that have run successfully.
# .chklog files are output from those tests.
# *.clog and *.clog2 are from the MPE option.
CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
@BUILD_FORTRAN_CONDITIONAL_TRUE@FORTRAN_DIR = fortran
@BUILD_CXX_CONDITIONAL_TRUE@CXX_DIR = c++
@BUILD_HDF5_HL_CONDITIONAL_TRUE@SUBDIRS = src test tools $(CXX_DIR) $(FORTRAN_DIR)
DIST_SUBDIRS = src test tools c++ fortran examples
# Automake needs to be taught how to build lib, progs, and tests targets.
# These will be filled in automatically for the most part (e.g.,
# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
# EXTRA_TEST variables are supplied to allow the user to force targets to
# be built at certain times.
LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \
$(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \
$(EXTRA_PROG)
chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST)
TEST_EXTENSIONS = .sh
SH_LOG_COMPILER = $(SHELL)
AM_SH_LOG_FLAGS =
TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
all: all-recursive
.SUFFIXES:
.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign hl/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
rm -f $< $@
$(MAKE) $(AM_MAKEFLAGS) $<
# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
@:
$(TEST_SUITE_LOG): $(TEST_LOGS)
@$(am__set_TESTS_bases); \
am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
redo_bases=`for i in $$bases; do \
am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
done`; \
if test -n "$$redo_bases"; then \
redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
if $(am__make_dryrun); then :; else \
rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
fi; \
fi; \
if test -n "$$am__remaking_logs"; then \
echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
"recursion detected" >&2; \
else \
am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
fi; \
if $(am__make_dryrun); then :; else \
st=0; \
errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
for i in $$redo_bases; do \
test -f $$i.trs && test -r $$i.trs \
|| { echo "$$errmsg $$i.trs" >&2; st=1; }; \
test -f $$i.log && test -r $$i.log \
|| { echo "$$errmsg $$i.log" >&2; st=1; }; \
done; \
test $$st -eq 0 || exit 1; \
fi
@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
ws='[ ]'; \
results=`for b in $$bases; do echo $$b.trs; done`; \
test -n "$$results" || results=/dev/null; \
all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
if test `expr $$fail + $$xpass + $$error` -eq 0; then \
success=true; \
else \
success=false; \
fi; \
br='==================='; br=$$br$$br$$br$$br; \
result_count () \
{ \
if test x"$$1" = x"--maybe-color"; then \
maybe_colorize=yes; \
elif test x"$$1" = x"--no-color"; then \
maybe_colorize=no; \
else \
echo "$@: invalid 'result_count' usage" >&2; exit 4; \
fi; \
shift; \
desc=$$1 count=$$2; \
if test $$maybe_colorize = yes && test $$count -gt 0; then \
color_start=$$3 color_end=$$std; \
else \
color_start= color_end=; \
fi; \
echo "$${color_start}# $$desc $$count$${color_end}"; \
}; \
create_testsuite_report () \
{ \
result_count $$1 "TOTAL:" $$all "$$brg"; \
result_count $$1 "PASS: " $$pass "$$grn"; \
result_count $$1 "SKIP: " $$skip "$$blu"; \
result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
result_count $$1 "FAIL: " $$fail "$$red"; \
result_count $$1 "XPASS:" $$xpass "$$red"; \
result_count $$1 "ERROR:" $$error "$$mgn"; \
}; \
{ \
echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
$(am__rst_title); \
create_testsuite_report --no-color; \
echo; \
echo ".. contents:: :depth: 2"; \
echo; \
for b in $$bases; do echo $$b; done \
| $(am__create_global_log); \
} >$(TEST_SUITE_LOG).tmp || exit 1; \
mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
if $$success; then \
col="$$grn"; \
else \
col="$$red"; \
test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
fi; \
echo "$${col}$$br$${std}"; \
echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
echo "$${col}$$br$${std}"; \
create_testsuite_report --maybe-color; \
echo "$$col$$br$$std"; \
if $$success; then :; else \
echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
if test -n "$(PACKAGE_BUGREPORT)"; then \
echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
fi; \
echo "$$col$$br$$std"; \
fi; \
$$success || exit 1
recheck: all
@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
@set +e; $(am__set_TESTS_bases); \
bases=`for i in $$bases; do echo $$i; done \
| $(am__list_recheck_tests)` || exit 1; \
log_list=`for i in $$bases; do echo $$i.log; done`; \
log_list=`echo $$log_list`; \
$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
am__force_recheck=am--force-recheck \
TEST_LOGS="$$log_list"; \
exit $$?
.sh.log:
@p='$<'; \
$(am__set_b); \
$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
@am__EXEEXT_TRUE@ @p='$<'; \
@am__EXEEXT_TRUE@ $(am__set_b); \
@am__EXEEXT_TRUE@ $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT)
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am: Makefile all-local
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am: installcheck-local
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
mostlyclean-local
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(am__recursive_targets) check-am install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
check check-TESTS check-am clean clean-generic clean-libtool \
cscopelist-am ctags ctags-am distclean distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installcheck-local installdirs installdirs-am \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
# This tells the Makefiles that these targets are not files to be built but
# commands that should be executed even if a file with the same name already
# exists.
.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
build-tests check-clean check-install check-p check-s check-vfd \
install-doc lib progs tests uninstall-doc _exec_check-s _test help
help:
@$(top_srcdir)/bin/makehelp
# Install examples
install-examples uninstall-examples:
for d in examples $(HDF5_INTERFACES); do \
(cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
done
installcheck-local:
@(cd examples && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;
# Clean examples when check-clean is invoked
check-clean ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS) examples; do \
if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
build-check-clean:
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
build-lib: $(LIB)
build-progs: $(LIB) $(PROGS)
build-tests: $(LIB) $(PROGS) $(chk_TESTS)
# General rule for recursive building targets.
# BUILT_SOURCES contain targets that need to be built before anything else
# in the directory (e.g., for Fortran type detection)
lib progs tests check-s check-p :: $(BUILT_SOURCES)
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
# General rule for recursive cleaning targets. Like the rule above,
# but doesn't require building BUILT_SOURCES.
check-clean ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
# Tell Automake to build tests when the user types `make all' (this is
# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since
# Automake won't build them automatically, either.
all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
# UPDATE: docs no longer reside in this build tree, so this target
# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
# clean up files generated by tests so they can be re-run.
build-check-clean:
$(RM) -rf $(CHECK_CLEANFILES)
# run check-clean whenever mostlyclean is run
mostlyclean-local: build-check-clean
# check-install is just a synonym for installcheck
check-install: installcheck
# Run each test in order, passing $(TEST_FLAGS) to the program.
# Since tests are done in a shell loop, "make -i" does apply inside it.
# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
# The timestamps give a rough idea how much time the tests use.
#
# Note that targets in chk_TESTS (defined above) will be built when the user
# types 'make tests' or 'make check', but only programs in TEST_PROG,
# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
check-TESTS: test
test _test:
@$(MAKE) build-check-s
@$(MAKE) build-check-p
# Actual execution of check-s.
build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
fi
@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
# $${log} is the log file.
# $${tname} is the name of test.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
tname=$(@:.chkexe_=)$(EXEEXT);\
log=$(@:.chkexe_=.chklog); \
echo "============================"; \
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
echo "No need to test $${tname} again."; \
else \
echo "============================" > $${log}; \
if test "X$(FORTRAN_API)" = "Xyes"; then \
echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
elif test "X$(CXX_API)" = "Xyes"; then \
echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
else \
echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
fi; \
echo "============================" >> $${log}; \
srcdir="$(srcdir)" \
$(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
(cat $${log} && false) || exit 1; \
echo "" >> $${log}; \
echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
echo "============================" >> $${log}; \
echo "Finished testing $${tname} $(TEST_FLAGS)"; \
cat $${log}; \
fi; \
fi
# The dummysh.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
# $${log} is the log file.
# $${tname} is the name of test.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
cmd=$(@:.chkexe_=);\
tname=`basename $$cmd`;\
chkname=`basename $(@:.chkexe_=.chkexe)`;\
log=`basename $(@:.chkexe_=.chklog)`; \
echo "============================"; \
if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
echo "No need to test $${tname} again."; \
else \
echo "============================" > $${log}; \
if test "X$(FORTRAN_API)" = "Xyes"; then \
echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
elif test "X$(CXX_API)" = "Xyes"; then \
echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
else \
echo "Testing $${tname} $(TEST_FLAGS)"; \
echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
fi; \
echo "============================" >> $${log}; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
$(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
&& touch $${chkname} || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
(cat $${log} && false) || exit 1; \
echo "" >> $${log}; \
echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
echo "============================" >> $${log}; \
echo "Finished testing $${tname} $(TEST_FLAGS)"; \
cat $${log}; \
fi; \
echo "============================"; \
fi
# Actual execution of check-p.
build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
fi
@if test -n "$(TEST_PROG_PARA)"; then \
echo "**** Hint ****"; \
echo "Parallel test files reside in the current directory" \
"by default."; \
echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \
echo " HDF5_PARAPREFIX=/PFS/user/me"; \
echo " export HDF5_PARAPREFIX"; \
echo " make check"; \
echo "**** end of Hint ****"; \
fi
@for test in $(TEST_PROG_PARA) dummy; do \
if test $$test != dummy; then \
$(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
RUNEXEC="$(RUNPARALLEL)" || exit 1; \
fi; \
done
@for test in $(TEST_SCRIPT_PARA) dummy; do \
if test $$test != dummy; then \
$(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
fi; \
done
@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
fi
# Run test with different Virtual File Driver
check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
@for vfd in $(VFD_LIST) dummy; do \
if test $$vfd != dummy; then \
echo "============================"; \
echo "Testing Virtual File Driver $$vfd"; \
echo "============================"; \
$(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \
HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \
fi; \
done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: