hdf5/src/H5Tpublic.h

622 lines
27 KiB
C
Raw Normal View History

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Copyright by The HDF Group. *
* Copyright by the Board of Trustees of the University of Illinois. *
* All rights reserved. *
* *
* This file is part of HDF5. The full HDF5 copyright notice, including *
* terms governing use, modification, and redistribution, is contained in *
* the files COPYING and Copyright.html. COPYING can be found at the root *
* of the source code distribution tree; Copyright.html can be found at the *
* root level of an installed copy of the electronic HDF5 document set and *
* is linked from the top-level documents page. It can also be found at *
* http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *
* access to either file, you may request a copy from help@hdfgroup.org. *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
1997-07-31 05:17:56 +08:00
/*
[svn-r35] ./src/H5ACproto.h ./src/H5Aproto.h ./src/H5Bproto.h ./src/H5Cproto.h ./src/H5Dproto.h ./src/H5Eproto.h ./src/H5Fproto.h ./src/H5Gproto.h ./src/H5Hproto.h ./src/H5MFproto.h ./src/H5MMproto.h ./src/H5Mproto.h ./src/H5Oproto.h ./src/H5Pproto.h ./src/H5Tproto.h ./src/H5proto.h These files were removed from the library and renamed by changing `proto' to `public'. ./src/H5ACpublic.h NEW ./src/H5Apublic.h NEW ./src/H5Bpublic.h NEW ./src/H5Cpublic.h NEW ./src/H5Dpublic.h NEW ./src/H5Epublic.h NEW ./src/H5Fpublic.h NEW ./src/H5Gpublic.h NEW ./src/H5Hpublic.h NEW ./src/H5MFpublic.h NEW ./src/H5MMpublic.h NEW ./src/H5Mpublic.h NEW ./src/H5Opublic.h NEW ./src/H5Ppublic.h NEW ./src/H5Tpublic.h NEW ./src/H5public.h NEW These files came from the old H5*proto.h files. ./src/Makefile ./src/Makefile.in NEW Removed. Now generated automatically from Makefile.in by running configure. ./src/h5oplat.h ./src/hdf5fort.h ./src/hdf5gen.h ./src/hdf5glob.h ./src/hdf5lims.h ./src/hdf5meta.h ./src/hdf5pabl.h ./src/hdf5plat.h ./src/hdf5port.h ./src/hdf5type.h Removed. The contents of these files has moved to other header files or source files depending on it's nature. ./src/H5.c ./src/H5A.c ./src/H5B.c ./src/H5C.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5G.c ./src/H5H.c ./src/H5M.c ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Ocont.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Ostab.c ./src/H5P.c ./src/H5T.c Fixed include files. Moved some things from old headers into these files. ./src/H5ACprivate.h ./src/H5Aprivate.h ./src/H5Bprivate.h ./src/H5Cprivate.h ./src/H5Dprivate.h ./src/H5Eprivate.h ./src/H5Fprivate.h ./src/H5Gprivate.h ./src/H5Hprivate.h ./src/H5MFprivate.h ./src/H5MMprivate.h ./src/H5Mprivate.h ./src/H5Oprivate.h ./src/H5Pprivate.h ./src/H5Tprivate.h ./src/H5private.h ./src/debug.c Fixed include files. ./src/hdf5.h This is now the top-level *PUBLIC* include file. It should never appear in the library *.c files.
1997-08-16 00:51:34 +08:00
* This file contains public declarations for the H5T module.
1997-07-31 05:17:56 +08:00
*/
[svn-r35] ./src/H5ACproto.h ./src/H5Aproto.h ./src/H5Bproto.h ./src/H5Cproto.h ./src/H5Dproto.h ./src/H5Eproto.h ./src/H5Fproto.h ./src/H5Gproto.h ./src/H5Hproto.h ./src/H5MFproto.h ./src/H5MMproto.h ./src/H5Mproto.h ./src/H5Oproto.h ./src/H5Pproto.h ./src/H5Tproto.h ./src/H5proto.h These files were removed from the library and renamed by changing `proto' to `public'. ./src/H5ACpublic.h NEW ./src/H5Apublic.h NEW ./src/H5Bpublic.h NEW ./src/H5Cpublic.h NEW ./src/H5Dpublic.h NEW ./src/H5Epublic.h NEW ./src/H5Fpublic.h NEW ./src/H5Gpublic.h NEW ./src/H5Hpublic.h NEW ./src/H5MFpublic.h NEW ./src/H5MMpublic.h NEW ./src/H5Mpublic.h NEW ./src/H5Opublic.h NEW ./src/H5Ppublic.h NEW ./src/H5Tpublic.h NEW ./src/H5public.h NEW These files came from the old H5*proto.h files. ./src/Makefile ./src/Makefile.in NEW Removed. Now generated automatically from Makefile.in by running configure. ./src/h5oplat.h ./src/hdf5fort.h ./src/hdf5gen.h ./src/hdf5glob.h ./src/hdf5lims.h ./src/hdf5meta.h ./src/hdf5pabl.h ./src/hdf5plat.h ./src/hdf5port.h ./src/hdf5type.h Removed. The contents of these files has moved to other header files or source files depending on it's nature. ./src/H5.c ./src/H5A.c ./src/H5B.c ./src/H5C.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5G.c ./src/H5H.c ./src/H5M.c ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Ocont.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Ostab.c ./src/H5P.c ./src/H5T.c Fixed include files. Moved some things from old headers into these files. ./src/H5ACprivate.h ./src/H5Aprivate.h ./src/H5Bprivate.h ./src/H5Cprivate.h ./src/H5Dprivate.h ./src/H5Eprivate.h ./src/H5Fprivate.h ./src/H5Gprivate.h ./src/H5Hprivate.h ./src/H5MFprivate.h ./src/H5MMprivate.h ./src/H5Mprivate.h ./src/H5Oprivate.h ./src/H5Pprivate.h ./src/H5Tprivate.h ./src/H5private.h ./src/debug.c Fixed include files. ./src/hdf5.h This is now the top-level *PUBLIC* include file. It should never appear in the library *.c files.
1997-08-16 00:51:34 +08:00
#ifndef _H5Tpublic_H
#define _H5Tpublic_H
/* Public headers needed by this file */
#include "H5public.h"
#include "H5Ipublic.h"
1997-07-31 05:17:56 +08:00
1998-04-24 06:24:38 +08:00
#define HOFFSET(S,M) (offsetof(S,M))
/* These are the various classes of datatypes */
/* If this goes over 16 types (0-15), the file format will need to change) */
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
typedef enum H5T_class_t {
H5T_NO_CLASS = -1, /*error */
H5T_INTEGER = 0, /*integer types */
H5T_FLOAT = 1, /*floating-point types */
H5T_TIME = 2, /*date and time types */
H5T_STRING = 3, /*character string types */
H5T_BITFIELD = 4, /*bit field types */
H5T_OPAQUE = 5, /*opaque types */
H5T_COMPOUND = 6, /*compound types */
H5T_REFERENCE = 7, /*reference types */
2000-11-10 22:34:09 +08:00
H5T_ENUM = 8, /*enumeration types */
H5T_VLEN = 9, /*Variable-Length types */
H5T_ARRAY = 10, /*Array types */
H5T_NCLASSES /*this must be last */
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
} H5T_class_t;
/* Byte orders */
typedef enum H5T_order_t {
H5T_ORDER_ERROR = -1, /*error */
H5T_ORDER_LE = 0, /*little endian */
H5T_ORDER_BE = 1, /*bit endian */
H5T_ORDER_VAX = 2, /*VAX mixed endian */
H5T_ORDER_MIXED = 3, /*Compound type with mixed member orders */
H5T_ORDER_NONE = 4 /*no particular order (strings, bits,..) */
/*H5T_ORDER_NONE must be last */
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
} H5T_order_t;
/* Types of integer sign schemes */
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
typedef enum H5T_sign_t {
H5T_SGN_ERROR = -1, /*error */
H5T_SGN_NONE = 0, /*this is an unsigned type */
H5T_SGN_2 = 1, /*two's complement */
H5T_NSGN = 2 /*this must be last! */
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
} H5T_sign_t;
/* Floating-point normalization schemes */
typedef enum H5T_norm_t {
H5T_NORM_ERROR = -1, /*error */
H5T_NORM_IMPLIED = 0, /*msb of mantissa isn't stored, always 1 */
H5T_NORM_MSBSET = 1, /*msb of mantissa is always 1 */
H5T_NORM_NONE = 2 /*not normalized */
/*H5T_NORM_NONE must be last */
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
} H5T_norm_t;
/*
* Character set to use for text strings. Do not change these values since
* they appear in HDF5 files!
*/
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
typedef enum H5T_cset_t {
H5T_CSET_ERROR = -1, /*error */
H5T_CSET_ASCII = 0, /*US ASCII */
H5T_CSET_UTF8 = 1, /*UTF-8 Unicode encoding */
H5T_CSET_RESERVED_2 = 2, /*reserved for later use */
H5T_CSET_RESERVED_3 = 3, /*reserved for later use */
H5T_CSET_RESERVED_4 = 4, /*reserved for later use */
H5T_CSET_RESERVED_5 = 5, /*reserved for later use */
H5T_CSET_RESERVED_6 = 6, /*reserved for later use */
H5T_CSET_RESERVED_7 = 7, /*reserved for later use */
H5T_CSET_RESERVED_8 = 8, /*reserved for later use */
H5T_CSET_RESERVED_9 = 9, /*reserved for later use */
H5T_CSET_RESERVED_10 = 10, /*reserved for later use */
H5T_CSET_RESERVED_11 = 11, /*reserved for later use */
H5T_CSET_RESERVED_12 = 12, /*reserved for later use */
H5T_CSET_RESERVED_13 = 13, /*reserved for later use */
H5T_CSET_RESERVED_14 = 14, /*reserved for later use */
H5T_CSET_RESERVED_15 = 15 /*reserved for later use */
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
} H5T_cset_t;
#define H5T_NCSET H5T_CSET_RESERVED_2 /*Number of character sets actually defined */
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
/*
* Type of padding to use in character strings. Do not change these values
* since they appear in HDF5 files!
*/
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
typedef enum H5T_str_t {
H5T_STR_ERROR = -1, /*error */
H5T_STR_NULLTERM = 0, /*null terminate like in C */
H5T_STR_NULLPAD = 1, /*pad with nulls */
H5T_STR_SPACEPAD = 2, /*pad with spaces like in Fortran */
H5T_STR_RESERVED_3 = 3, /*reserved for later use */
H5T_STR_RESERVED_4 = 4, /*reserved for later use */
H5T_STR_RESERVED_5 = 5, /*reserved for later use */
H5T_STR_RESERVED_6 = 6, /*reserved for later use */
H5T_STR_RESERVED_7 = 7, /*reserved for later use */
H5T_STR_RESERVED_8 = 8, /*reserved for later use */
H5T_STR_RESERVED_9 = 9, /*reserved for later use */
H5T_STR_RESERVED_10 = 10, /*reserved for later use */
H5T_STR_RESERVED_11 = 11, /*reserved for later use */
H5T_STR_RESERVED_12 = 12, /*reserved for later use */
H5T_STR_RESERVED_13 = 13, /*reserved for later use */
H5T_STR_RESERVED_14 = 14, /*reserved for later use */
H5T_STR_RESERVED_15 = 15 /*reserved for later use */
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
} H5T_str_t;
#define H5T_NSTR H5T_STR_RESERVED_3 /*num H5T_str_t types actually defined */
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
/* Type of padding to use in other atomic types */
typedef enum H5T_pad_t {
H5T_PAD_ERROR = -1, /*error */
H5T_PAD_ZERO = 0, /*always set to zero */
H5T_PAD_ONE = 1, /*always set to one */
H5T_PAD_BACKGROUND = 2, /*set to background value */
H5T_NPAD = 3 /*THIS MUST BE LAST */
} H5T_pad_t;
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
/* Commands sent to conversion functions */
typedef enum H5T_cmd_t {
H5T_CONV_INIT = 0, /*query and/or initialize private data */
H5T_CONV_CONV = 1, /*convert data from source to dest datatype */
H5T_CONV_FREE = 2 /*function is being removed from path */
} H5T_cmd_t;
/* How is the `bkg' buffer used by the conversion function? */
typedef enum H5T_bkg_t {
H5T_BKG_NO = 0, /*background buffer is not needed, send NULL */
H5T_BKG_TEMP = 1, /*bkg buffer used as temp storage only */
H5T_BKG_YES = 2 /*init bkg buf with data before conversion */
} H5T_bkg_t;
/* Type conversion client data */
typedef struct H5T_cdata_t {
H5T_cmd_t command;/*what should the conversion function do? */
H5T_bkg_t need_bkg;/*is the background buffer needed? */
hbool_t recalc; /*recalculate private data */
void *priv; /*private data */
} H5T_cdata_t;
[svn-r971] Changes since 19981214 ---------------------- ./INSTALL Added warning that enabling debugging code can adversely affect performance even when the debugging isn't turned on at run-time. Performance testing shows that under certain circumstances (like data type conversions of compound types) the H5_timer functions, although only a few lines each, contribute a fairly large percent to the execution time. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tpublic.h Improved the H5Tunregister() function to make unregistering more flexible. It takes the same arguments as H5Tregister() but also accepts wild cards. All conversion functions that match the H5Tunregister() search criteria are removed from the global type conversion table. The H5Tregister_hard() and H5Tregister_soft() were combined into a single function called H5Tregister() which is the counterpart to H5Tunregister(). A new `persistence' argument was added to differentiate between the two types of conversion functions. The application is allowed to register a hard conversion function for the no-op conversion path although the library isn't obligated to call it (it usually does). This is mostly for completeness, but the application might use it to help determine if the raw data pipeline was able to use the optimized path for the case when no type conversion is necessary. The library doesn't allow this path to be unregistered although the application can redefine it as often as it likes. Fixed the type conversion tables in preparation for MT-safety and to fix previosly-known design bugs wrt. unregistering conversion functions or changing the C function associated with a conversion path. The MT-safety stuff is documented in a separate white paper. Increased the conversion function debugging name from 9 characters to 31 characters so the output can be more descriptive. Moved conversion path statistics from the H5T_cdata_t member into the conversion path itself. This makes H5T_cdata_t contain only application-visible data structures. ./src/H5A.c ./src/H5D.c ./src/H5Ofill.c ./src/H5P.c ./src/H5T.c Improved the way type conversion functions are called so the caller doesn't have to check for data type debugging and increment type conversion timers and statistics. Changed check for no-op conversion since it is now application-definable and there may even be more than one definition at a time in a multi-threaded application (one thread might be using the no-op conversion path when some other thread changes its definition -- the first thread still sees the original defintion until it's done with the operation). ./doc/html/Datatypes.html Updated the user guide to reflect the changes to data type conversion registration functions. ./bin/trace ./src/H5.c Added tracing support for the new H5T_pers_t data type. ./test/dtypes.c Added printf to display alignment value if non-aligned data types are being tested. ./test/h5test.c Modified the H5Tunregister() calls to use the new arguments. All 94 of those calls can be replaced by a single call to the new H5Tunregister() function. ./src/H5.c Added HAVE_GETTIMEOFDAY around an auto variable and initialized the elapsed time to zero when gettimeofday() is not available. ./src/H5F.c ./src/H5Fprivate.h ./src/H5P.c Added an H5*_init() functions which do the same thing as H5*_init_interface() but can be called from other packages and don't do anything if the interface is already initialized. This fixes a couple memory leaks in applications that repeatedly close and open the library with H5close(). ./src/H5Tconv.c Optimized some data alignment code in the hardware conversion functions. Hardware conversions accumulate statistics about source and destination data alignment and print that information when the conversion function is unregistered (usually when the application exits) if data type debugging is compiled into the library and enabled at run-time. The conversion caching was cleaned up for the compound data type conversion function. It now caches conversion paths in a manner that will be MT-safe and is much simpler than the old method. Also cleaned up some array index maps. ./src/H5detect.c Fixd mispelling of alingemnt. ./src/H5private.h Changed `TRUE' to `1' in assignment to interface_initialize_g in FUNC_ENTER macro definition. ./tools/testh5dump.sh Completely rewritten to make it shorter, better documented, and conforming to most of the other test outputs. The comparison of the actual output with the expected output is insensitive to differences in white space. The test now passes for the first time on Linux where the output width wasn't as expected but the output was otherwise correct. ./tools/testfiles/tall-1.ddl ./tools/testfiles/tall-2.ddl ./tools/testfiles/tall-3.ddl ./tools/testfiles/tattr-1.ddl ./tools/testfiles/tattr-2.ddl ./tools/testfiles/tattr-3.ddl ./tools/testfiles/tattr-4.ddl ./tools/testfiles/tcomp-1.ddl ./tools/testfiles/tcomp-2.ddl ./tools/testfiles/tcomp-3.ddl ./tools/testfiles/tcomp-4.ddl ./tools/testfiles/tdset-1.ddl ./tools/testfiles/tdset-2.ddl ./tools/testfiles/tdset-3.ddl ./tools/testfiles/tdset-4.ddl ./tools/testfiles/tgroup-1.ddl ./tools/testfiles/tgroup-2.ddl ./tools/testfiles/tgroup-3.ddl ./tools/testfiles/tlink-1.ddl ./tools/testfiles/tlink-2.ddl ./tools/testfiles/tlink-3.ddl ./tools/testfiles/tlink-4.ddl ./tools/testfiles/tlink-5.ddl ./tools/testfiles/tslink-1.ddl ./tools/testfiles/tslink-2.ddl Changed `../h5dump' to just `h5dump'. ./config/alpha-dec-osf4.0 Added more warning and optimization switches to the native compiler.
1998-12-18 03:35:20 +08:00
/* Conversion function persistence */
typedef enum H5T_pers_t {
H5T_PERS_DONTCARE = -1, /*wild card */
H5T_PERS_HARD = 0, /*hard conversion function */
H5T_PERS_SOFT = 1 /*soft conversion function */
} H5T_pers_t;
/* The order to retrieve atomic native datatype */
typedef enum H5T_direction_t {
H5T_DIR_DEFAULT = 0, /*default direction is inscendent */
H5T_DIR_ASCEND = 1, /*in inscendent order */
H5T_DIR_DESCEND = 2 /*in descendent order */
} H5T_direction_t;
2004-04-28 03:16:54 +08:00
/* The exception type passed into the conversion callback function */
typedef enum H5T_conv_except_t {
H5T_CONV_EXCEPT_RANGE_HI = 0, /*source value is greater than destination's range */
H5T_CONV_EXCEPT_RANGE_LOW = 1, /*source value is less than destination's range */
H5T_CONV_EXCEPT_PRECISION = 2, /*source value loses precision in destination */
H5T_CONV_EXCEPT_TRUNCATE = 3, /*source value is truncated in destination */
H5T_CONV_EXCEPT_PINF = 4, /*source value is positive infinity(floating number) */
H5T_CONV_EXCEPT_NINF = 5, /*source value is negative infinity(floating number) */
H5T_CONV_EXCEPT_NAN = 6 /*source value is NaN(floating number) */
2004-04-28 03:16:54 +08:00
} H5T_conv_except_t;
/* The return value from conversion callback function H5T_conv_except_func_t */
typedef enum H5T_conv_ret_t {
H5T_CONV_ABORT = -1, /*abort conversion */
H5T_CONV_UNHANDLED = 0, /*callback function failed to handle the exception */
H5T_CONV_HANDLED = 1 /*callback function handled the exception successfully */
} H5T_conv_ret_t;
/* Variable Length Datatype struct in memory */
/* (This is only used for VL sequences, not VL strings, which are stored in char *'s) */
typedef struct {
size_t len; /* Length of VL data (in base type units) */
void *p; /* Pointer to VL data */
} hvl_t;
/* Variable Length String information */
#define H5T_VARIABLE ((size_t)(-1)) /* Indicate that a string is variable length (null-terminated in C, instead of fixed length) */
/* Opaque information */
#define H5T_OPAQUE_TAG_MAX 256 /* Maximum length of an opaque tag */
/* This could be raised without too much difficulty */
#ifdef __cplusplus
extern "C" {
#endif
/* All datatype conversion functions are... */
typedef herr_t (*H5T_conv_t) (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata,
size_t nelmts, size_t buf_stride, size_t bkg_stride, void *buf,
void *bkg, hid_t dset_xfer_plist);
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
2004-04-28 03:16:54 +08:00
/* Exception handler. If an exception like overflow happenes during conversion,
* this function is called if it's registered through H5Pset_type_conv_cb.
*/
typedef H5T_conv_ret_t (*H5T_conv_except_func_t)(H5T_conv_except_t except_type,
hid_t src_id, hid_t dst_id, void *src_buf, void *dst_buf, void *user_data);
/* When this header is included from a private header, don't make calls to H5open() */
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#undef H5OPEN
#ifndef _H5private_H
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5OPEN H5open(),
#else /* _H5private_H */
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5OPEN
#endif /* _H5private_H */
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
/*
* The IEEE floating point types in various byte orders.
*/
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5T_IEEE_F32BE (H5OPEN H5T_IEEE_F32BE_g)
#define H5T_IEEE_F32LE (H5OPEN H5T_IEEE_F32LE_g)
#define H5T_IEEE_F64BE (H5OPEN H5T_IEEE_F64BE_g)
#define H5T_IEEE_F64LE (H5OPEN H5T_IEEE_F64LE_g)
H5_DLLVAR hid_t H5T_IEEE_F32BE_g;
H5_DLLVAR hid_t H5T_IEEE_F32LE_g;
H5_DLLVAR hid_t H5T_IEEE_F64BE_g;
H5_DLLVAR hid_t H5T_IEEE_F64LE_g;
/*
* These are "standard" types. For instance, signed (2's complement) and
* unsigned integers of various sizes and byte orders.
*/
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5T_STD_I8BE (H5OPEN H5T_STD_I8BE_g)
#define H5T_STD_I8LE (H5OPEN H5T_STD_I8LE_g)
#define H5T_STD_I16BE (H5OPEN H5T_STD_I16BE_g)
#define H5T_STD_I16LE (H5OPEN H5T_STD_I16LE_g)
#define H5T_STD_I32BE (H5OPEN H5T_STD_I32BE_g)
#define H5T_STD_I32LE (H5OPEN H5T_STD_I32LE_g)
#define H5T_STD_I64BE (H5OPEN H5T_STD_I64BE_g)
#define H5T_STD_I64LE (H5OPEN H5T_STD_I64LE_g)
#define H5T_STD_U8BE (H5OPEN H5T_STD_U8BE_g)
#define H5T_STD_U8LE (H5OPEN H5T_STD_U8LE_g)
#define H5T_STD_U16BE (H5OPEN H5T_STD_U16BE_g)
#define H5T_STD_U16LE (H5OPEN H5T_STD_U16LE_g)
#define H5T_STD_U32BE (H5OPEN H5T_STD_U32BE_g)
#define H5T_STD_U32LE (H5OPEN H5T_STD_U32LE_g)
#define H5T_STD_U64BE (H5OPEN H5T_STD_U64BE_g)
#define H5T_STD_U64LE (H5OPEN H5T_STD_U64LE_g)
#define H5T_STD_B8BE (H5OPEN H5T_STD_B8BE_g)
#define H5T_STD_B8LE (H5OPEN H5T_STD_B8LE_g)
#define H5T_STD_B16BE (H5OPEN H5T_STD_B16BE_g)
#define H5T_STD_B16LE (H5OPEN H5T_STD_B16LE_g)
#define H5T_STD_B32BE (H5OPEN H5T_STD_B32BE_g)
#define H5T_STD_B32LE (H5OPEN H5T_STD_B32LE_g)
#define H5T_STD_B64BE (H5OPEN H5T_STD_B64BE_g)
#define H5T_STD_B64LE (H5OPEN H5T_STD_B64LE_g)
#define H5T_STD_REF_OBJ (H5OPEN H5T_STD_REF_OBJ_g)
#define H5T_STD_REF_DSETREG (H5OPEN H5T_STD_REF_DSETREG_g)
H5_DLLVAR hid_t H5T_STD_I8BE_g;
H5_DLLVAR hid_t H5T_STD_I8LE_g;
H5_DLLVAR hid_t H5T_STD_I16BE_g;
H5_DLLVAR hid_t H5T_STD_I16LE_g;
H5_DLLVAR hid_t H5T_STD_I32BE_g;
H5_DLLVAR hid_t H5T_STD_I32LE_g;
H5_DLLVAR hid_t H5T_STD_I64BE_g;
H5_DLLVAR hid_t H5T_STD_I64LE_g;
H5_DLLVAR hid_t H5T_STD_U8BE_g;
H5_DLLVAR hid_t H5T_STD_U8LE_g;
H5_DLLVAR hid_t H5T_STD_U16BE_g;
H5_DLLVAR hid_t H5T_STD_U16LE_g;
H5_DLLVAR hid_t H5T_STD_U32BE_g;
H5_DLLVAR hid_t H5T_STD_U32LE_g;
H5_DLLVAR hid_t H5T_STD_U64BE_g;
H5_DLLVAR hid_t H5T_STD_U64LE_g;
H5_DLLVAR hid_t H5T_STD_B8BE_g;
H5_DLLVAR hid_t H5T_STD_B8LE_g;
H5_DLLVAR hid_t H5T_STD_B16BE_g;
H5_DLLVAR hid_t H5T_STD_B16LE_g;
H5_DLLVAR hid_t H5T_STD_B32BE_g;
H5_DLLVAR hid_t H5T_STD_B32LE_g;
H5_DLLVAR hid_t H5T_STD_B64BE_g;
H5_DLLVAR hid_t H5T_STD_B64LE_g;
H5_DLLVAR hid_t H5T_STD_REF_OBJ_g;
H5_DLLVAR hid_t H5T_STD_REF_DSETREG_g;
/*
* Types which are particular to Unix.
*/
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5T_UNIX_D32BE (H5OPEN H5T_UNIX_D32BE_g)
#define H5T_UNIX_D32LE (H5OPEN H5T_UNIX_D32LE_g)
#define H5T_UNIX_D64BE (H5OPEN H5T_UNIX_D64BE_g)
#define H5T_UNIX_D64LE (H5OPEN H5T_UNIX_D64LE_g)
H5_DLLVAR hid_t H5T_UNIX_D32BE_g;
H5_DLLVAR hid_t H5T_UNIX_D32LE_g;
H5_DLLVAR hid_t H5T_UNIX_D64BE_g;
H5_DLLVAR hid_t H5T_UNIX_D64LE_g;
/*
* Types particular to the C language. String types use `bytes' instead
* of `bits' as their size.
*/
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5T_C_S1 (H5OPEN H5T_C_S1_g)
H5_DLLVAR hid_t H5T_C_S1_g;
/*
* Types particular to Fortran.
*/
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5T_FORTRAN_S1 (H5OPEN H5T_FORTRAN_S1_g)
H5_DLLVAR hid_t H5T_FORTRAN_S1_g;
/*
* These types are for Intel CPU's. They are little endian with IEEE
* floating point.
*/
#define H5T_INTEL_I8 H5T_STD_I8LE
#define H5T_INTEL_I16 H5T_STD_I16LE
#define H5T_INTEL_I32 H5T_STD_I32LE
#define H5T_INTEL_I64 H5T_STD_I64LE
#define H5T_INTEL_U8 H5T_STD_U8LE
#define H5T_INTEL_U16 H5T_STD_U16LE
#define H5T_INTEL_U32 H5T_STD_U32LE
#define H5T_INTEL_U64 H5T_STD_U64LE
#define H5T_INTEL_B8 H5T_STD_B8LE
#define H5T_INTEL_B16 H5T_STD_B16LE
#define H5T_INTEL_B32 H5T_STD_B32LE
#define H5T_INTEL_B64 H5T_STD_B64LE
#define H5T_INTEL_F32 H5T_IEEE_F32LE
#define H5T_INTEL_F64 H5T_IEEE_F64LE
/*
* These types are for DEC Alpha CPU's. They are little endian with IEEE
* floating point.
*/
#define H5T_ALPHA_I8 H5T_STD_I8LE
#define H5T_ALPHA_I16 H5T_STD_I16LE
#define H5T_ALPHA_I32 H5T_STD_I32LE
#define H5T_ALPHA_I64 H5T_STD_I64LE
#define H5T_ALPHA_U8 H5T_STD_U8LE
#define H5T_ALPHA_U16 H5T_STD_U16LE
#define H5T_ALPHA_U32 H5T_STD_U32LE
#define H5T_ALPHA_U64 H5T_STD_U64LE
#define H5T_ALPHA_B8 H5T_STD_B8LE
#define H5T_ALPHA_B16 H5T_STD_B16LE
#define H5T_ALPHA_B32 H5T_STD_B32LE
#define H5T_ALPHA_B64 H5T_STD_B64LE
#define H5T_ALPHA_F32 H5T_IEEE_F32LE
#define H5T_ALPHA_F64 H5T_IEEE_F64LE
/*
* These types are for MIPS cpu's commonly used in SGI systems. They are big
* endian with IEEE floating point.
*/
#define H5T_MIPS_I8 H5T_STD_I8BE
#define H5T_MIPS_I16 H5T_STD_I16BE
#define H5T_MIPS_I32 H5T_STD_I32BE
#define H5T_MIPS_I64 H5T_STD_I64BE
#define H5T_MIPS_U8 H5T_STD_U8BE
#define H5T_MIPS_U16 H5T_STD_U16BE
#define H5T_MIPS_U32 H5T_STD_U32BE
#define H5T_MIPS_U64 H5T_STD_U64BE
#define H5T_MIPS_B8 H5T_STD_B8BE
#define H5T_MIPS_B16 H5T_STD_B16BE
#define H5T_MIPS_B32 H5T_STD_B32BE
#define H5T_MIPS_B64 H5T_STD_B64BE
#define H5T_MIPS_F32 H5T_IEEE_F32BE
#define H5T_MIPS_F64 H5T_IEEE_F64BE
/*
* The VAX floating point types (i.e. in VAX byte order)
*/
#define H5T_VAX_F32 (H5OPEN H5T_VAX_F32_g)
#define H5T_VAX_F64 (H5OPEN H5T_VAX_F64_g)
H5_DLLVAR hid_t H5T_VAX_F32_g;
H5_DLLVAR hid_t H5T_VAX_F64_g;
/*
* The predefined native types. These are the types detected by H5detect and
* they violate the naming scheme a little. Instead of a class name,
* precision and byte order as the last component, they have a C-like type
* name. If the type begins with `U' then it is the unsigned version of the
* integer type; other integer types are signed. The type LLONG corresponds
* to C's `long long' and LDOUBLE is `long double' (these types might be the
* same as `LONG' and `DOUBLE' respectively).
*/
#define H5T_NATIVE_CHAR (CHAR_MIN?H5T_NATIVE_SCHAR:H5T_NATIVE_UCHAR)
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5T_NATIVE_SCHAR (H5OPEN H5T_NATIVE_SCHAR_g)
#define H5T_NATIVE_UCHAR (H5OPEN H5T_NATIVE_UCHAR_g)
#define H5T_NATIVE_SHORT (H5OPEN H5T_NATIVE_SHORT_g)
#define H5T_NATIVE_USHORT (H5OPEN H5T_NATIVE_USHORT_g)
#define H5T_NATIVE_INT (H5OPEN H5T_NATIVE_INT_g)
#define H5T_NATIVE_UINT (H5OPEN H5T_NATIVE_UINT_g)
#define H5T_NATIVE_LONG (H5OPEN H5T_NATIVE_LONG_g)
#define H5T_NATIVE_ULONG (H5OPEN H5T_NATIVE_ULONG_g)
#define H5T_NATIVE_LLONG (H5OPEN H5T_NATIVE_LLONG_g)
#define H5T_NATIVE_ULLONG (H5OPEN H5T_NATIVE_ULLONG_g)
#define H5T_NATIVE_FLOAT (H5OPEN H5T_NATIVE_FLOAT_g)
#define H5T_NATIVE_DOUBLE (H5OPEN H5T_NATIVE_DOUBLE_g)
#if H5_SIZEOF_LONG_DOUBLE !=0
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5T_NATIVE_LDOUBLE (H5OPEN H5T_NATIVE_LDOUBLE_g)
#endif
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5T_NATIVE_B8 (H5OPEN H5T_NATIVE_B8_g)
#define H5T_NATIVE_B16 (H5OPEN H5T_NATIVE_B16_g)
#define H5T_NATIVE_B32 (H5OPEN H5T_NATIVE_B32_g)
#define H5T_NATIVE_B64 (H5OPEN H5T_NATIVE_B64_g)
#define H5T_NATIVE_OPAQUE (H5OPEN H5T_NATIVE_OPAQUE_g)
#define H5T_NATIVE_HADDR (H5OPEN H5T_NATIVE_HADDR_g)
#define H5T_NATIVE_HSIZE (H5OPEN H5T_NATIVE_HSIZE_g)
#define H5T_NATIVE_HSSIZE (H5OPEN H5T_NATIVE_HSSIZE_g)
#define H5T_NATIVE_HERR (H5OPEN H5T_NATIVE_HERR_g)
#define H5T_NATIVE_HBOOL (H5OPEN H5T_NATIVE_HBOOL_g)
H5_DLLVAR hid_t H5T_NATIVE_SCHAR_g;
H5_DLLVAR hid_t H5T_NATIVE_UCHAR_g;
H5_DLLVAR hid_t H5T_NATIVE_SHORT_g;
H5_DLLVAR hid_t H5T_NATIVE_USHORT_g;
H5_DLLVAR hid_t H5T_NATIVE_INT_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT_g;
H5_DLLVAR hid_t H5T_NATIVE_LONG_g;
H5_DLLVAR hid_t H5T_NATIVE_ULONG_g;
H5_DLLVAR hid_t H5T_NATIVE_LLONG_g;
H5_DLLVAR hid_t H5T_NATIVE_ULLONG_g;
H5_DLLVAR hid_t H5T_NATIVE_FLOAT_g;
H5_DLLVAR hid_t H5T_NATIVE_DOUBLE_g;
#if H5_SIZEOF_LONG_DOUBLE !=0
H5_DLLVAR hid_t H5T_NATIVE_LDOUBLE_g;
#endif
H5_DLLVAR hid_t H5T_NATIVE_B8_g;
H5_DLLVAR hid_t H5T_NATIVE_B16_g;
H5_DLLVAR hid_t H5T_NATIVE_B32_g;
H5_DLLVAR hid_t H5T_NATIVE_B64_g;
H5_DLLVAR hid_t H5T_NATIVE_OPAQUE_g;
H5_DLLVAR hid_t H5T_NATIVE_HADDR_g;
H5_DLLVAR hid_t H5T_NATIVE_HSIZE_g;
H5_DLLVAR hid_t H5T_NATIVE_HSSIZE_g;
H5_DLLVAR hid_t H5T_NATIVE_HERR_g;
H5_DLLVAR hid_t H5T_NATIVE_HBOOL_g;
/* C9x integer types */
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5T_NATIVE_INT8 (H5OPEN H5T_NATIVE_INT8_g)
#define H5T_NATIVE_UINT8 (H5OPEN H5T_NATIVE_UINT8_g)
#define H5T_NATIVE_INT_LEAST8 (H5OPEN H5T_NATIVE_INT_LEAST8_g)
#define H5T_NATIVE_UINT_LEAST8 (H5OPEN H5T_NATIVE_UINT_LEAST8_g)
#define H5T_NATIVE_INT_FAST8 (H5OPEN H5T_NATIVE_INT_FAST8_g)
#define H5T_NATIVE_UINT_FAST8 (H5OPEN H5T_NATIVE_UINT_FAST8_g)
H5_DLLVAR hid_t H5T_NATIVE_INT8_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT8_g;
H5_DLLVAR hid_t H5T_NATIVE_INT_LEAST8_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT_LEAST8_g;
H5_DLLVAR hid_t H5T_NATIVE_INT_FAST8_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT_FAST8_g;
[svn-r1341] Changes since 19990611 ---------------------- ./doc/html/H5.format.html Added documentation for opaque data types (bitfield types were already documented but they were out of order). ./src/H5E.c Fixed a bug with glibc2 on linux systems where `stdout' is an extern and can't be used to initialize static data. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tpublic.h ./src/H5detect.c Removed the `_T' from the new C9x types I just added so the names are consistent with existing types. Besides, the fact that something is a datatype is obvious because it starts with H5T_NATIVE_. ./tools/h5ls.c Added the new C9x data types. H5ls prints one of these types only if it doesn't match one of the builtin C types. Prints the OID for shared data types. Fixed a formatting bug with symbolic links which was introduced a few changes ago. The commandline has been changed so that objects from multiple files can be listed with a single command. Instead of specifying a file name and an optional list of objects, each thing to print is a file name and object concatenated. H5ls figures out how to devide the name into a file name and object name even when the file name part doesn't correspond to an actual Unix file. Old syntax: h5ls [OPTIONS] FILE [OBJECTS] New syntax: h5ls [OPTIONS] FILE[/OBJECT] [FILE[/OBJECT]]... Example ({X,Y} is expanded by the shell) Old command: h5ls -d ../test/x.data dir1 dir2 New command: h5ls -d ../test/x.data/{dir1,dir2} The filename is printed as part of the object name when full names are requested (--full or --recursive). If people really don't like this they can undefine a constant at the top of h5ls. Errors from the hdf5 library are turned off. Commandline switches of the form `--width 80' are accepted in addition to `--width=80'. This is more symmetric with single-letter switches that take two forms: `-w 80' and `-w80'. ./src/H5D.c Added tracing instrumentation for H5Dvlen_reclaim(). ./src/H5private.h Added casts to int for the isalpha() et al macros to shut up solaris warnings about char subscripts.
1999-06-14 23:07:58 +08:00
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5T_NATIVE_INT16 (H5OPEN H5T_NATIVE_INT16_g)
#define H5T_NATIVE_UINT16 (H5OPEN H5T_NATIVE_UINT16_g)
#define H5T_NATIVE_INT_LEAST16 (H5OPEN H5T_NATIVE_INT_LEAST16_g)
#define H5T_NATIVE_UINT_LEAST16 (H5OPEN H5T_NATIVE_UINT_LEAST16_g)
#define H5T_NATIVE_INT_FAST16 (H5OPEN H5T_NATIVE_INT_FAST16_g)
#define H5T_NATIVE_UINT_FAST16 (H5OPEN H5T_NATIVE_UINT_FAST16_g)
H5_DLLVAR hid_t H5T_NATIVE_INT16_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT16_g;
H5_DLLVAR hid_t H5T_NATIVE_INT_LEAST16_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT_LEAST16_g;
H5_DLLVAR hid_t H5T_NATIVE_INT_FAST16_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT_FAST16_g;
[svn-r1341] Changes since 19990611 ---------------------- ./doc/html/H5.format.html Added documentation for opaque data types (bitfield types were already documented but they were out of order). ./src/H5E.c Fixed a bug with glibc2 on linux systems where `stdout' is an extern and can't be used to initialize static data. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tpublic.h ./src/H5detect.c Removed the `_T' from the new C9x types I just added so the names are consistent with existing types. Besides, the fact that something is a datatype is obvious because it starts with H5T_NATIVE_. ./tools/h5ls.c Added the new C9x data types. H5ls prints one of these types only if it doesn't match one of the builtin C types. Prints the OID for shared data types. Fixed a formatting bug with symbolic links which was introduced a few changes ago. The commandline has been changed so that objects from multiple files can be listed with a single command. Instead of specifying a file name and an optional list of objects, each thing to print is a file name and object concatenated. H5ls figures out how to devide the name into a file name and object name even when the file name part doesn't correspond to an actual Unix file. Old syntax: h5ls [OPTIONS] FILE [OBJECTS] New syntax: h5ls [OPTIONS] FILE[/OBJECT] [FILE[/OBJECT]]... Example ({X,Y} is expanded by the shell) Old command: h5ls -d ../test/x.data dir1 dir2 New command: h5ls -d ../test/x.data/{dir1,dir2} The filename is printed as part of the object name when full names are requested (--full or --recursive). If people really don't like this they can undefine a constant at the top of h5ls. Errors from the hdf5 library are turned off. Commandline switches of the form `--width 80' are accepted in addition to `--width=80'. This is more symmetric with single-letter switches that take two forms: `-w 80' and `-w80'. ./src/H5D.c Added tracing instrumentation for H5Dvlen_reclaim(). ./src/H5private.h Added casts to int for the isalpha() et al macros to shut up solaris warnings about char subscripts.
1999-06-14 23:07:58 +08:00
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5T_NATIVE_INT32 (H5OPEN H5T_NATIVE_INT32_g)
#define H5T_NATIVE_UINT32 (H5OPEN H5T_NATIVE_UINT32_g)
#define H5T_NATIVE_INT_LEAST32 (H5OPEN H5T_NATIVE_INT_LEAST32_g)
#define H5T_NATIVE_UINT_LEAST32 (H5OPEN H5T_NATIVE_UINT_LEAST32_g)
#define H5T_NATIVE_INT_FAST32 (H5OPEN H5T_NATIVE_INT_FAST32_g)
#define H5T_NATIVE_UINT_FAST32 (H5OPEN H5T_NATIVE_UINT_FAST32_g)
H5_DLLVAR hid_t H5T_NATIVE_INT32_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT32_g;
H5_DLLVAR hid_t H5T_NATIVE_INT_LEAST32_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT_LEAST32_g;
H5_DLLVAR hid_t H5T_NATIVE_INT_FAST32_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT_FAST32_g;
[svn-r1341] Changes since 19990611 ---------------------- ./doc/html/H5.format.html Added documentation for opaque data types (bitfield types were already documented but they were out of order). ./src/H5E.c Fixed a bug with glibc2 on linux systems where `stdout' is an extern and can't be used to initialize static data. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tpublic.h ./src/H5detect.c Removed the `_T' from the new C9x types I just added so the names are consistent with existing types. Besides, the fact that something is a datatype is obvious because it starts with H5T_NATIVE_. ./tools/h5ls.c Added the new C9x data types. H5ls prints one of these types only if it doesn't match one of the builtin C types. Prints the OID for shared data types. Fixed a formatting bug with symbolic links which was introduced a few changes ago. The commandline has been changed so that objects from multiple files can be listed with a single command. Instead of specifying a file name and an optional list of objects, each thing to print is a file name and object concatenated. H5ls figures out how to devide the name into a file name and object name even when the file name part doesn't correspond to an actual Unix file. Old syntax: h5ls [OPTIONS] FILE [OBJECTS] New syntax: h5ls [OPTIONS] FILE[/OBJECT] [FILE[/OBJECT]]... Example ({X,Y} is expanded by the shell) Old command: h5ls -d ../test/x.data dir1 dir2 New command: h5ls -d ../test/x.data/{dir1,dir2} The filename is printed as part of the object name when full names are requested (--full or --recursive). If people really don't like this they can undefine a constant at the top of h5ls. Errors from the hdf5 library are turned off. Commandline switches of the form `--width 80' are accepted in addition to `--width=80'. This is more symmetric with single-letter switches that take two forms: `-w 80' and `-w80'. ./src/H5D.c Added tracing instrumentation for H5Dvlen_reclaim(). ./src/H5private.h Added casts to int for the isalpha() et al macros to shut up solaris warnings about char subscripts.
1999-06-14 23:07:58 +08:00
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
#define H5T_NATIVE_INT64 (H5OPEN H5T_NATIVE_INT64_g)
#define H5T_NATIVE_UINT64 (H5OPEN H5T_NATIVE_UINT64_g)
#define H5T_NATIVE_INT_LEAST64 (H5OPEN H5T_NATIVE_INT_LEAST64_g)
#define H5T_NATIVE_UINT_LEAST64 (H5OPEN H5T_NATIVE_UINT_LEAST64_g)
#define H5T_NATIVE_INT_FAST64 (H5OPEN H5T_NATIVE_INT_FAST64_g)
#define H5T_NATIVE_UINT_FAST64 (H5OPEN H5T_NATIVE_UINT_FAST64_g)
H5_DLLVAR hid_t H5T_NATIVE_INT64_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT64_g;
H5_DLLVAR hid_t H5T_NATIVE_INT_LEAST64_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT_LEAST64_g;
H5_DLLVAR hid_t H5T_NATIVE_INT_FAST64_g;
H5_DLLVAR hid_t H5T_NATIVE_UINT_FAST64_g;
/* Operations defined on all datatypes */
H5_DLL hid_t H5Tcreate(H5T_class_t type, size_t size);
H5_DLL hid_t H5Tcopy(hid_t type_id);
H5_DLL herr_t H5Tclose(hid_t type_id);
H5_DLL htri_t H5Tequal(hid_t type1_id, hid_t type2_id);
H5_DLL herr_t H5Tlock(hid_t type_id);
H5_DLL herr_t H5Tcommit2(hid_t loc_id, const char *name, hid_t type_id,
hid_t lcpl_id, hid_t tcpl_id, hid_t tapl_id);
H5_DLL hid_t H5Topen2(hid_t loc_id, const char *name, hid_t tapl_id);
H5_DLL herr_t H5Tcommit_anon(hid_t loc_id, hid_t type_id, hid_t tcpl_id, hid_t tapl_id);
H5_DLL hid_t H5Tget_create_plist(hid_t type_id);
H5_DLL htri_t H5Tcommitted(hid_t type_id);
H5_DLL herr_t H5Tencode(hid_t obj_id, void *buf, size_t *nalloc);
H5_DLL hid_t H5Tdecode(const void *buf);
[svn-r139] ./src/*.[ch] Removed the interface initialization argument from FUNC_ENTER() and made it a locally-defined preprocessor symbol, INTERFACE_INIT. Changed `offset' to `address' and `length' to `size' in documentation so it's more consistent. `Offset' still appears occassionally when it refers to a byte offset within some other data structure. Moved interface termination function prototypes from public header files to .c files and made them static. ./src/H5.c ./src/H5public.h Added H5init() because it's possible that the predefined data types are not initialized. This happens only if the first call to the hdf5 library passes a predefined data type symbol as an argument. There should be some way to fix this... ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h The free_func returns SUCCEED or FAIL, although the return value is ignored by H5A. This is so we can use the various H5*_close() functions to free things. H5Ainc_ref() and H5Adec_ref() are no longer public. Many of the other atom functions should also be made private, but I'll save that for later... Added additional template groups called H5_TEMPLATE_0 through H5_TEMPLATE_7 that are used by the various template subclasses. Increased the number of bits used for atom groups to prevent negative atoms. ./src/H5AC.c ./src/H5ACprivate.h Changed H5AC_new() to H5AC_create() to make names more consistent. ./src/H5B.c ./src/H5Bprivate.h Changed H5B_new() to H5B_create() to make names more consistent. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Now supports multiple subclasses of templates, although it's done with big switch statements. The default values for templates are defined in the source file to which that template belongs. This got rid of lots of needless preprocessor constants. Added H5Ccreate() to create a new template. Changed H5C_release() to H5Cclose() to make the naming more consistent. ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h Enhanced to use the new dataset interface, and uses the enhanced data type and data space interfaces, which haven't been completely implemented. The dataset interface doesn't handle non-contiguous storage, compression, or data type and space conversions yet. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h Removed H5Fflush() since just calls H5F_flush(), which doesn't do what the user would probably think it does, namely, flush everything. It only flushes those things sitting in the H5AC cache and the boot block. Changed the `file_create_parms' field of H5F_low_t to just `create_parms' since the `file' part is obvious. ./src/H5Fistore.c Added some support for external files. Mostly just in the file format and not supported much by the library yet. I need to finish some dataset functions first. Changed H5F_istore_new() to H5F_istore_create() to make names more uniform across packages. ./src/H5Flow.c Flushing a file causes the file to be physically extended to the logical eof. This prevents H5F_open() from thinking a file has been truncated. Most of the time the file will already be that large, and when it isn't Unix will often just allocate the final block anyway. ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Removed H5G_basename() Removed (temporarily) data type information from symbol table entries and renamed H5G_CACHED_SDATA to H5G_CACHED_SDSPACE to reflect that it's a simple data space and has nothing to do with raw data. Changed H5G_node_new() to H5G_node_create() and H5G_stab_new() to H5G_stab_create() to make names more uniform across packages. Fixed an undefined address bug that happens when H5G_node_debug() program doesn't pass enough info to H5G_node_load(). ./src/H5H.c ./src/H5Hprivate.h Changed H5H_new() to H5H_create() to make the names more uniform across packages. ./src/H5M.c ./src/H5Mprivate.h ./src/H5Mpublic.h Nulled all the create functions. Most of the other callbacks are to public functions. Removed H5Mcreate(). Changed hobjtype_t to group_t since it has to be the same thing anyway. ./src/H5O.c ./src/H5Oprivate.h ./src/H5Osdim.c ./src/H5Osdtyp.c Changed H5O_SIM_DIM to H5O_SDSPACE (simple data space) since `simple data space' is its official name, not `simple dimensions'. Will eventually add H5O_CDSPACE for comples data spaces. Changed _sim_dim_ to _dspace_. Replaced H5O_SIM_DTYPE and the compound data type messages with a single H5O_DTYPE message. Changed _sim_dtype_ to _dtype_. Changed H5O_STD_STORE to H5O_CSTORE (contiguous storage) since contiguous storage is not necessarily standard. Changed _std_store_ to _cstore_ in H5Ocstore.c Added the H5O_EFL (external file list) message. Changed H5O_new() to H5O_create() to make names more uniform across packages. ./src/H5Oefl.c NEW External file list message for specifying which non-hdf5 files contain raw data for a dataset. ./src/H5P.c ./src/H5Pprivate.h ./src/H5Ppublic.h Renamed and moved data structures to make the names conform to our naming scheme. ./src/H5T.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5Tpkg.h NEW Data structures redesigned to be more flexible. The interface was redesigned to make it more regular and to make some names more uniform across packages. ./src/H5detect.c Output was changed to produce a file that conforms to the hdf5 coding standard. ./src/Makefile.in Generates H5Tinit.c by running H5detect. ./src/debug.c Moved command argument processing.
1997-12-11 06:41:07 +08:00
/* Operations defined on compound datatypes */
H5_DLL herr_t H5Tinsert(hid_t parent_id, const char *name, size_t offset,
hid_t member_id);
H5_DLL herr_t H5Tpack(hid_t type_id);
/* Operations defined on enumeration datatypes */
H5_DLL hid_t H5Tenum_create(hid_t base_id);
H5_DLL herr_t H5Tenum_insert(hid_t type, const char *name, const void *value);
H5_DLL herr_t H5Tenum_nameof(hid_t type, const void *value, char *name/*out*/,
[svn-r1032] Changes since 19990118 ---------------------- ./tools/h5tools.c Strings are not converted to null-padding before being printed; they are printed with whatever byte values appear in the file. ./tools/h5ls.c Now able to display attribute data type and data. Added a `-f' or `--full' switch which causes the full name of each object to be displayed instead of just the base name. Added a `-r' or `--recursive' switch that recursively prints the contents of groups, avoiding cycles. More bulletproofing for non-printable characters in things like object names, attribute names, and comment strings. We don't want listing a file to send termal escape sequences because it's sometimes possible to execute commands that way. Since h5ls doesn't usually use quotes around object names we must sometimes escape space characters. External files are listed in a table to make the output less confusing. ./tools/h5tools.c ./tools/h5tools.h Changed h5dump() to h5dump_dset() and added h5dump_mem(). Also make h5dump_fixtype() public. ./test/dtypes.c Wrote some data to an attribute to test h5ls attribute printing. ./src/H5ACprivate.h ./src/H5Apublic.h ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5Epublic.h ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gprivate.h ./src/H5HLprivate.h ./src/H5Oprivate.h ./src/H5Ppublic.h ./src/H5RApublic.h ./src/H5Rpublic.h ./src/H5Spublic.h ./src/H5Tpkg.h ./src/H5Tpublic.h ./src/H5Vprivate.h ./src/H5Zpublic.h ./src/H5private.h ./src/H5public.h Reindented function prototypes after `HDF5API' was added. Also rewrapped long lines. ./src/H5Flow.c Added an `#ifdef WIN32' around an unused variable. ./src/H5api_adpt.h Removed extra carriage returns inserted by "broken" operating system. ./src/H5Dprivate.h ./src/H5Oprivate.h ./src/H5Vprivate.h ./src/H5private.h Removed extraneous inclusion of H5api_adpt.h since it's included in H5public.h which is included by everything. ./src/Makefile.in Added H5api_adpt.h to the list of public header files to fix broken `make install'.
1999-01-22 02:33:39 +08:00
size_t size);
H5_DLL herr_t H5Tenum_valueof(hid_t type, const char *name,
[svn-r1032] Changes since 19990118 ---------------------- ./tools/h5tools.c Strings are not converted to null-padding before being printed; they are printed with whatever byte values appear in the file. ./tools/h5ls.c Now able to display attribute data type and data. Added a `-f' or `--full' switch which causes the full name of each object to be displayed instead of just the base name. Added a `-r' or `--recursive' switch that recursively prints the contents of groups, avoiding cycles. More bulletproofing for non-printable characters in things like object names, attribute names, and comment strings. We don't want listing a file to send termal escape sequences because it's sometimes possible to execute commands that way. Since h5ls doesn't usually use quotes around object names we must sometimes escape space characters. External files are listed in a table to make the output less confusing. ./tools/h5tools.c ./tools/h5tools.h Changed h5dump() to h5dump_dset() and added h5dump_mem(). Also make h5dump_fixtype() public. ./test/dtypes.c Wrote some data to an attribute to test h5ls attribute printing. ./src/H5ACprivate.h ./src/H5Apublic.h ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5Epublic.h ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gprivate.h ./src/H5HLprivate.h ./src/H5Oprivate.h ./src/H5Ppublic.h ./src/H5RApublic.h ./src/H5Rpublic.h ./src/H5Spublic.h ./src/H5Tpkg.h ./src/H5Tpublic.h ./src/H5Vprivate.h ./src/H5Zpublic.h ./src/H5private.h ./src/H5public.h Reindented function prototypes after `HDF5API' was added. Also rewrapped long lines. ./src/H5Flow.c Added an `#ifdef WIN32' around an unused variable. ./src/H5api_adpt.h Removed extra carriage returns inserted by "broken" operating system. ./src/H5Dprivate.h ./src/H5Oprivate.h ./src/H5Vprivate.h ./src/H5private.h Removed extraneous inclusion of H5api_adpt.h since it's included in H5public.h which is included by everything. ./src/Makefile.in Added H5api_adpt.h to the list of public header files to fix broken `make install'.
1999-01-22 02:33:39 +08:00
void *value/*out*/);
/* Operations defined on variable-length datatypes */
H5_DLL hid_t H5Tvlen_create(hid_t base_id);
/* Operations defined on array datatypes */
H5_DLL hid_t H5Tarray_create2(hid_t base_id, unsigned ndims,
const hsize_t dim[/* ndims */]);
H5_DLL int H5Tget_array_ndims(hid_t type_id);
H5_DLL int H5Tget_array_dims2(hid_t type_id, hsize_t dims[]);
/* Operations defined on opaque datatypes */
H5_DLL herr_t H5Tset_tag(hid_t type, const char *tag);
H5_DLL char *H5Tget_tag(hid_t type);
/* Querying property values */
H5_DLL hid_t H5Tget_super(hid_t type);
H5_DLL H5T_class_t H5Tget_class(hid_t type_id);
H5_DLL htri_t H5Tdetect_class(hid_t type_id, H5T_class_t cls);
H5_DLL size_t H5Tget_size(hid_t type_id);
H5_DLL H5T_order_t H5Tget_order(hid_t type_id);
H5_DLL size_t H5Tget_precision(hid_t type_id);
H5_DLL int H5Tget_offset(hid_t type_id);
H5_DLL herr_t H5Tget_pad(hid_t type_id, H5T_pad_t *lsb/*out*/,
[svn-r1032] Changes since 19990118 ---------------------- ./tools/h5tools.c Strings are not converted to null-padding before being printed; they are printed with whatever byte values appear in the file. ./tools/h5ls.c Now able to display attribute data type and data. Added a `-f' or `--full' switch which causes the full name of each object to be displayed instead of just the base name. Added a `-r' or `--recursive' switch that recursively prints the contents of groups, avoiding cycles. More bulletproofing for non-printable characters in things like object names, attribute names, and comment strings. We don't want listing a file to send termal escape sequences because it's sometimes possible to execute commands that way. Since h5ls doesn't usually use quotes around object names we must sometimes escape space characters. External files are listed in a table to make the output less confusing. ./tools/h5tools.c ./tools/h5tools.h Changed h5dump() to h5dump_dset() and added h5dump_mem(). Also make h5dump_fixtype() public. ./test/dtypes.c Wrote some data to an attribute to test h5ls attribute printing. ./src/H5ACprivate.h ./src/H5Apublic.h ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5Epublic.h ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gprivate.h ./src/H5HLprivate.h ./src/H5Oprivate.h ./src/H5Ppublic.h ./src/H5RApublic.h ./src/H5Rpublic.h ./src/H5Spublic.h ./src/H5Tpkg.h ./src/H5Tpublic.h ./src/H5Vprivate.h ./src/H5Zpublic.h ./src/H5private.h ./src/H5public.h Reindented function prototypes after `HDF5API' was added. Also rewrapped long lines. ./src/H5Flow.c Added an `#ifdef WIN32' around an unused variable. ./src/H5api_adpt.h Removed extra carriage returns inserted by "broken" operating system. ./src/H5Dprivate.h ./src/H5Oprivate.h ./src/H5Vprivate.h ./src/H5private.h Removed extraneous inclusion of H5api_adpt.h since it's included in H5public.h which is included by everything. ./src/Makefile.in Added H5api_adpt.h to the list of public header files to fix broken `make install'.
1999-01-22 02:33:39 +08:00
H5T_pad_t *msb/*out*/);
H5_DLL H5T_sign_t H5Tget_sign(hid_t type_id);
H5_DLL herr_t H5Tget_fields(hid_t type_id, size_t *spos/*out*/,
[svn-r1032] Changes since 19990118 ---------------------- ./tools/h5tools.c Strings are not converted to null-padding before being printed; they are printed with whatever byte values appear in the file. ./tools/h5ls.c Now able to display attribute data type and data. Added a `-f' or `--full' switch which causes the full name of each object to be displayed instead of just the base name. Added a `-r' or `--recursive' switch that recursively prints the contents of groups, avoiding cycles. More bulletproofing for non-printable characters in things like object names, attribute names, and comment strings. We don't want listing a file to send termal escape sequences because it's sometimes possible to execute commands that way. Since h5ls doesn't usually use quotes around object names we must sometimes escape space characters. External files are listed in a table to make the output less confusing. ./tools/h5tools.c ./tools/h5tools.h Changed h5dump() to h5dump_dset() and added h5dump_mem(). Also make h5dump_fixtype() public. ./test/dtypes.c Wrote some data to an attribute to test h5ls attribute printing. ./src/H5ACprivate.h ./src/H5Apublic.h ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5Epublic.h ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gprivate.h ./src/H5HLprivate.h ./src/H5Oprivate.h ./src/H5Ppublic.h ./src/H5RApublic.h ./src/H5Rpublic.h ./src/H5Spublic.h ./src/H5Tpkg.h ./src/H5Tpublic.h ./src/H5Vprivate.h ./src/H5Zpublic.h ./src/H5private.h ./src/H5public.h Reindented function prototypes after `HDF5API' was added. Also rewrapped long lines. ./src/H5Flow.c Added an `#ifdef WIN32' around an unused variable. ./src/H5api_adpt.h Removed extra carriage returns inserted by "broken" operating system. ./src/H5Dprivate.h ./src/H5Oprivate.h ./src/H5Vprivate.h ./src/H5private.h Removed extraneous inclusion of H5api_adpt.h since it's included in H5public.h which is included by everything. ./src/Makefile.in Added H5api_adpt.h to the list of public header files to fix broken `make install'.
1999-01-22 02:33:39 +08:00
size_t *epos/*out*/, size_t *esize/*out*/,
size_t *mpos/*out*/, size_t *msize/*out*/);
H5_DLL size_t H5Tget_ebias(hid_t type_id);
H5_DLL H5T_norm_t H5Tget_norm(hid_t type_id);
H5_DLL H5T_pad_t H5Tget_inpad(hid_t type_id);
H5_DLL H5T_str_t H5Tget_strpad(hid_t type_id);
H5_DLL int H5Tget_nmembers(hid_t type_id);
H5_DLL char *H5Tget_member_name(hid_t type_id, unsigned membno);
H5_DLL int H5Tget_member_index(hid_t type_id, const char *name);
H5_DLL size_t H5Tget_member_offset(hid_t type_id, unsigned membno);
H5_DLL H5T_class_t H5Tget_member_class(hid_t type_id, unsigned membno);
H5_DLL hid_t H5Tget_member_type(hid_t type_id, unsigned membno);
H5_DLL herr_t H5Tget_member_value(hid_t type_id, unsigned membno, void *value/*out*/);
H5_DLL H5T_cset_t H5Tget_cset(hid_t type_id);
H5_DLL htri_t H5Tis_variable_str(hid_t type_id);
H5_DLL hid_t H5Tget_native_type(hid_t type_id, H5T_direction_t direction);
/* Setting property values */
H5_DLL herr_t H5Tset_size(hid_t type_id, size_t size);
H5_DLL herr_t H5Tset_order(hid_t type_id, H5T_order_t order);
H5_DLL herr_t H5Tset_precision(hid_t type_id, size_t prec);
H5_DLL herr_t H5Tset_offset(hid_t type_id, size_t offset);
H5_DLL herr_t H5Tset_pad(hid_t type_id, H5T_pad_t lsb, H5T_pad_t msb);
H5_DLL herr_t H5Tset_sign(hid_t type_id, H5T_sign_t sign);
H5_DLL herr_t H5Tset_fields(hid_t type_id, size_t spos, size_t epos,
size_t esize, size_t mpos, size_t msize);
H5_DLL herr_t H5Tset_ebias(hid_t type_id, size_t ebias);
H5_DLL herr_t H5Tset_norm(hid_t type_id, H5T_norm_t norm);
H5_DLL herr_t H5Tset_inpad(hid_t type_id, H5T_pad_t pad);
H5_DLL herr_t H5Tset_cset(hid_t type_id, H5T_cset_t cset);
H5_DLL herr_t H5Tset_strpad(hid_t type_id, H5T_str_t strpad);
/* Type conversion database */
H5_DLL herr_t H5Tregister(H5T_pers_t pers, const char *name, hid_t src_id,
[svn-r1032] Changes since 19990118 ---------------------- ./tools/h5tools.c Strings are not converted to null-padding before being printed; they are printed with whatever byte values appear in the file. ./tools/h5ls.c Now able to display attribute data type and data. Added a `-f' or `--full' switch which causes the full name of each object to be displayed instead of just the base name. Added a `-r' or `--recursive' switch that recursively prints the contents of groups, avoiding cycles. More bulletproofing for non-printable characters in things like object names, attribute names, and comment strings. We don't want listing a file to send termal escape sequences because it's sometimes possible to execute commands that way. Since h5ls doesn't usually use quotes around object names we must sometimes escape space characters. External files are listed in a table to make the output less confusing. ./tools/h5tools.c ./tools/h5tools.h Changed h5dump() to h5dump_dset() and added h5dump_mem(). Also make h5dump_fixtype() public. ./test/dtypes.c Wrote some data to an attribute to test h5ls attribute printing. ./src/H5ACprivate.h ./src/H5Apublic.h ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5Epublic.h ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gprivate.h ./src/H5HLprivate.h ./src/H5Oprivate.h ./src/H5Ppublic.h ./src/H5RApublic.h ./src/H5Rpublic.h ./src/H5Spublic.h ./src/H5Tpkg.h ./src/H5Tpublic.h ./src/H5Vprivate.h ./src/H5Zpublic.h ./src/H5private.h ./src/H5public.h Reindented function prototypes after `HDF5API' was added. Also rewrapped long lines. ./src/H5Flow.c Added an `#ifdef WIN32' around an unused variable. ./src/H5api_adpt.h Removed extra carriage returns inserted by "broken" operating system. ./src/H5Dprivate.h ./src/H5Oprivate.h ./src/H5Vprivate.h ./src/H5private.h Removed extraneous inclusion of H5api_adpt.h since it's included in H5public.h which is included by everything. ./src/Makefile.in Added H5api_adpt.h to the list of public header files to fix broken `make install'.
1999-01-22 02:33:39 +08:00
hid_t dst_id, H5T_conv_t func);
H5_DLL herr_t H5Tunregister(H5T_pers_t pers, const char *name, hid_t src_id,
hid_t dst_id, H5T_conv_t func);
H5_DLL H5T_conv_t H5Tfind(hid_t src_id, hid_t dst_id, H5T_cdata_t **pcdata);
H5_DLL htri_t H5Tcompiler_conv(hid_t src_id, hid_t dst_id);
H5_DLL herr_t H5Tconvert(hid_t src_id, hid_t dst_id, size_t nelmts,
void *buf, void *background, hid_t plist_id);
1997-07-31 05:17:56 +08:00
/* Symbols defined for compatibility with previous versions of the HDF5 API.
*
* Use of these symbols is deprecated.
*/
#ifndef H5_NO_DEPRECATED_SYMBOLS
/* Macros */
/* Typedefs */
/* Function prototypes */
H5_DLL herr_t H5Tcommit1(hid_t loc_id, const char *name, hid_t type_id);
H5_DLL hid_t H5Topen1(hid_t loc_id, const char *name);
H5_DLL hid_t H5Tarray_create1(hid_t base_id, int ndims,
const hsize_t dim[/* ndims */],
const int perm[/* ndims */]);
H5_DLL int H5Tget_array_dims1(hid_t type_id, hsize_t dims[], int perm[]);
#endif /* H5_NO_DEPRECATED_SYMBOLS */
[svn-r35] ./src/H5ACproto.h ./src/H5Aproto.h ./src/H5Bproto.h ./src/H5Cproto.h ./src/H5Dproto.h ./src/H5Eproto.h ./src/H5Fproto.h ./src/H5Gproto.h ./src/H5Hproto.h ./src/H5MFproto.h ./src/H5MMproto.h ./src/H5Mproto.h ./src/H5Oproto.h ./src/H5Pproto.h ./src/H5Tproto.h ./src/H5proto.h These files were removed from the library and renamed by changing `proto' to `public'. ./src/H5ACpublic.h NEW ./src/H5Apublic.h NEW ./src/H5Bpublic.h NEW ./src/H5Cpublic.h NEW ./src/H5Dpublic.h NEW ./src/H5Epublic.h NEW ./src/H5Fpublic.h NEW ./src/H5Gpublic.h NEW ./src/H5Hpublic.h NEW ./src/H5MFpublic.h NEW ./src/H5MMpublic.h NEW ./src/H5Mpublic.h NEW ./src/H5Opublic.h NEW ./src/H5Ppublic.h NEW ./src/H5Tpublic.h NEW ./src/H5public.h NEW These files came from the old H5*proto.h files. ./src/Makefile ./src/Makefile.in NEW Removed. Now generated automatically from Makefile.in by running configure. ./src/h5oplat.h ./src/hdf5fort.h ./src/hdf5gen.h ./src/hdf5glob.h ./src/hdf5lims.h ./src/hdf5meta.h ./src/hdf5pabl.h ./src/hdf5plat.h ./src/hdf5port.h ./src/hdf5type.h Removed. The contents of these files has moved to other header files or source files depending on it's nature. ./src/H5.c ./src/H5A.c ./src/H5B.c ./src/H5C.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5G.c ./src/H5H.c ./src/H5M.c ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Ocont.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Ostab.c ./src/H5P.c ./src/H5T.c Fixed include files. Moved some things from old headers into these files. ./src/H5ACprivate.h ./src/H5Aprivate.h ./src/H5Bprivate.h ./src/H5Cprivate.h ./src/H5Dprivate.h ./src/H5Eprivate.h ./src/H5Fprivate.h ./src/H5Gprivate.h ./src/H5Hprivate.h ./src/H5MFprivate.h ./src/H5MMprivate.h ./src/H5Mprivate.h ./src/H5Oprivate.h ./src/H5Pprivate.h ./src/H5Tprivate.h ./src/H5private.h ./src/debug.c Fixed include files. ./src/hdf5.h This is now the top-level *PUBLIC* include file. It should never appear in the library *.c files.
1997-08-16 00:51:34 +08:00
#ifdef __cplusplus
1997-07-31 05:17:56 +08:00
}
[svn-r35] ./src/H5ACproto.h ./src/H5Aproto.h ./src/H5Bproto.h ./src/H5Cproto.h ./src/H5Dproto.h ./src/H5Eproto.h ./src/H5Fproto.h ./src/H5Gproto.h ./src/H5Hproto.h ./src/H5MFproto.h ./src/H5MMproto.h ./src/H5Mproto.h ./src/H5Oproto.h ./src/H5Pproto.h ./src/H5Tproto.h ./src/H5proto.h These files were removed from the library and renamed by changing `proto' to `public'. ./src/H5ACpublic.h NEW ./src/H5Apublic.h NEW ./src/H5Bpublic.h NEW ./src/H5Cpublic.h NEW ./src/H5Dpublic.h NEW ./src/H5Epublic.h NEW ./src/H5Fpublic.h NEW ./src/H5Gpublic.h NEW ./src/H5Hpublic.h NEW ./src/H5MFpublic.h NEW ./src/H5MMpublic.h NEW ./src/H5Mpublic.h NEW ./src/H5Opublic.h NEW ./src/H5Ppublic.h NEW ./src/H5Tpublic.h NEW ./src/H5public.h NEW These files came from the old H5*proto.h files. ./src/Makefile ./src/Makefile.in NEW Removed. Now generated automatically from Makefile.in by running configure. ./src/h5oplat.h ./src/hdf5fort.h ./src/hdf5gen.h ./src/hdf5glob.h ./src/hdf5lims.h ./src/hdf5meta.h ./src/hdf5pabl.h ./src/hdf5plat.h ./src/hdf5port.h ./src/hdf5type.h Removed. The contents of these files has moved to other header files or source files depending on it's nature. ./src/H5.c ./src/H5A.c ./src/H5B.c ./src/H5C.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5G.c ./src/H5H.c ./src/H5M.c ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Ocont.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Ostab.c ./src/H5P.c ./src/H5T.c Fixed include files. Moved some things from old headers into these files. ./src/H5ACprivate.h ./src/H5Aprivate.h ./src/H5Bprivate.h ./src/H5Cprivate.h ./src/H5Dprivate.h ./src/H5Eprivate.h ./src/H5Fprivate.h ./src/H5Gprivate.h ./src/H5Hprivate.h ./src/H5MFprivate.h ./src/H5MMprivate.h ./src/H5Mprivate.h ./src/H5Oprivate.h ./src/H5Pprivate.h ./src/H5Tprivate.h ./src/H5private.h ./src/debug.c Fixed include files. ./src/hdf5.h This is now the top-level *PUBLIC* include file. It should never appear in the library *.c files.
1997-08-16 00:51:34 +08:00
#endif
#endif /* _H5Tpublic_H */