hdf5/test/trefstr.c

377 lines
12 KiB
C
Raw Normal View History

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Copyright by The HDF Group. *
* Copyright by the Board of Trustees of the University of Illinois. *
* All rights reserved. *
* *
* This file is part of HDF5. The full HDF5 copyright notice, including *
* terms governing use, modification, and redistribution, is contained in *
* the files COPYING and Copyright.html. COPYING can be found at the root *
* of the source code distribution tree; Copyright.html can be found at the *
* root level of an installed copy of the electronic HDF5 document set and *
* is linked from the top-level documents page. It can also be found at *
* http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *
* access to either file, you may request a copy from help@hdfgroup.org. *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
/*
FILE
refstr.c
Test HDF reference counted string routines.
REMARKS
DESIGN
BUGS/LIMITATIONS
EXPORTED ROUTINES
AUTHOR
Quincey Koziol
MODIFICATION HISTORY
12/17/02 - Started coding
*/
#include "testhdf5.h"
#include "H5FLprivate.h"
#include "H5RSprivate.h"
/* Declare extern the PQ free list for the wrapped strings */
H5FL_BLK_EXTERN(str_buf);
/****************************************************************
**
** test_refstr_init(): Test basic H5RS (ref-counted strings) code.
** Initialize data for RS testing
**
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
****************************************************************/
static void
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
test_refstr_init(void)
{
} /* end test_refstr_init() */
/****************************************************************
**
** test_refstr_create(): Test basic H5RS (ref-counted strings) code.
** Tests creating and closing ref-counted strings.
**
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
****************************************************************/
static void
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
test_refstr_create(void)
{
H5RS_str_t *rs; /* Ref-counted string created */
unsigned count; /* Reference count on string */
herr_t ret; /* Generic return value */
/* Output message about test being performed */
MESSAGE(5, ("Testing Creating & Closing Ref-Counted Strings\n"));
/* Try creating a ref-counted string */
rs=H5RS_create("foo");
CHECK(rs, NULL, "H5RS_create");
/* Get the reference count on the string */
count=H5RS_get_count(rs);
VERIFY(count, 1, "H5RS_get_count");
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
/* Try closing a real ref-counted string */
ret=H5RS_decr(rs);
CHECK(ret, FAIL, "H5RS_decr");
} /* end test_refstr_create() */
/****************************************************************
**
** test_refstr_count(): Test basic H5RS (ref-counted strings) code.
** Tests reference counting on ref-counted strings.
**
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
****************************************************************/
static void
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
test_refstr_count(void)
{
H5RS_str_t *rs; /* Ref-counted string created */
unsigned count; /* Reference count on string */
herr_t ret; /* Generic return value */
/* Output message about test being performed */
MESSAGE(5, ("Testing Incrementing & Decrementing Ref-Counted Strings\n"));
/* Try creating a ref-counted string */
rs=H5RS_create("foo");
CHECK(rs, NULL, "H5RS_create");
/* Get the reference count on the string */
count=H5RS_get_count(rs);
VERIFY(count, 1, "H5RS_get_count");
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
/* Increment reference count */
ret=H5RS_incr(rs);
CHECK(ret, FAIL, "H5RS_incr");
/* Get the reference count on the string */
count=H5RS_get_count(rs);
VERIFY(count, 2, "H5RS_get_count");
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
/* Decrement reference count for string */
ret=H5RS_decr(rs);
CHECK(ret, FAIL, "H5RS_decr");
/* Get the reference count on the string */
count=H5RS_get_count(rs);
VERIFY(count, 1, "H5RS_get_count");
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
/* Decrement reference count for string */
ret=H5RS_decr(rs);
CHECK(ret, FAIL, "H5RS_decr");
} /* end test_refstr_count() */
/****************************************************************
**
** test_refstr_dup(): Test basic H5RS (ref-counted strings) code.
** Tests duplicating ref-counted strings.
**
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
****************************************************************/
static void
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
test_refstr_dup(void)
{
H5RS_str_t *rs1; /* Ref-counted string created */
H5RS_str_t *rs2; /* Ref-counted string created */
unsigned count; /* Reference count on string */
herr_t ret; /* Generic return value */
/* Output message about test being performed */
MESSAGE(5, ("Testing Duplicating Ref-Counted Strings\n"));
/* Try creating a ref-counted string */
rs1=H5RS_create("foo");
CHECK(rs1, NULL, "H5RS_create");
/* Get the reference count on the string */
count=H5RS_get_count(rs1);
VERIFY(count, 1, "H5RS_get_count");
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
/* Duplicate r-string */
rs2=H5RS_dup(rs1);
CHECK(rs2, NULL, "H5RS_dup");
/* Get the reference count on the strings */
count=H5RS_get_count(rs1);
VERIFY(count, 2, "H5RS_get_count");
count=H5RS_get_count(rs2);
VERIFY(count, 2, "H5RS_get_count");
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
/* Decrement reference count for string */
ret=H5RS_decr(rs2);
CHECK(ret, FAIL, "H5RS_decr");
/* Get the reference count on the string */
count=H5RS_get_count(rs1);
VERIFY(count, 1, "H5RS_get_count");
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
/* Decrement reference count for string */
ret=H5RS_decr(rs1);
CHECK(ret, FAIL, "H5RS_decr");
} /* end test_refstr_dup() */
/****************************************************************
**
** test_refstr_cmp(): Test basic H5RS (ref-counted strings) code.
** Tests comparing ref-counted strings.
**
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
****************************************************************/
static void
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
test_refstr_cmp(void)
{
H5RS_str_t *rs1; /* Ref-counted string created */
H5RS_str_t *rs2; /* Ref-counted string created */
int cmp; /* Comparison value */
ssize_t len; /* Length of string */
herr_t ret; /* Generic return value */
/* Output message about test being performed */
MESSAGE(5, ("Testing Comparing Ref-Counted Strings\n"));
/* Create first reference counted string */
rs1=H5RS_create("foo");
CHECK(rs1, NULL, "H5RS_create");
/* Create second reference counted string */
rs2=H5RS_create("foo2");
CHECK(rs2, NULL, "H5RS_create");
/* Compare the strings in various ways */
cmp=H5RS_cmp(rs1,rs1);
VERIFY(cmp, 0, "H5RS_cmp");
cmp=H5RS_cmp(rs2,rs2);
VERIFY(cmp, 0, "H5RS_cmp");
cmp=H5RS_cmp(rs1,rs2);
if(cmp>=0)
TestErrPrintf("%d: string comparison incorrect!\n",__LINE__);
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
/* Check the lengths of the strings also */
len=H5RS_len(rs1);
VERIFY(len, 3, "H5RS_len");
len=H5RS_len(rs2);
VERIFY(len, 4, "H5RS_len");
/* Decrement reference count for strings */
ret=H5RS_decr(rs2);
CHECK(ret, FAIL, "H5RS_decr");
ret=H5RS_decr(rs1);
CHECK(ret, FAIL, "H5RS_decr");
} /* end test_refstr_cmp() */
/****************************************************************
**
** test_refstr_wrap(): Test basic H5RS (ref-counted strings) code.
** Tests wrapping ref-counted strings around existing strings.
**
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
****************************************************************/
static void
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
test_refstr_wrap(void)
{
H5RS_str_t *rs; /* Ref-counted string created */
const char *s; /* Pointer to raw string in ref-counted string */
char buf[16]; /* Buffer to wrap */
int cmp; /* Comparison value */
herr_t ret; /* Generic return value */
/* Output message about test being performed */
MESSAGE(5, ("Testing Wrapping Ref-Counted Strings\n"));
/* Initialize buffer */
HDstrcpy(buf,"foo");
/* Wrap ref-counted string around existing buffer */
rs=H5RS_wrap(buf);
CHECK(rs, NULL, "H5RS_wrap");
/* Get pointer to raw string in ref-counted string */
s=H5RS_get_str(rs);
CHECK(s, NULL, "H5RS_get_str");
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
VERIFY(s, buf, "wrapping");
cmp=HDstrcmp(s,buf);
VERIFY(cmp, 0, "HDstrcmp");
/* Increment reference count (should duplicate string) */
ret=H5RS_incr(rs);
CHECK(ret, FAIL, "H5RS_incr");
/* Change the buffer initially wrapped */
buf[0]='F';
/* Get pointer to raw string in ref-counted string */
s=H5RS_get_str(rs);
CHECK(s, NULL, "H5RS_get_str");
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
CHECK(s, buf, "wrapping");
cmp=HDstrcmp(s,buf);
if(cmp<=0)
TestErrPrintf("%d: string comparison incorrect!\n",__LINE__);
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
/* Decrement reference count for string */
ret=H5RS_decr(rs);
CHECK(ret, FAIL, "H5RS_decr");
ret=H5RS_decr(rs);
CHECK(ret, FAIL, "H5RS_decr");
} /* end test_refstr_wrap() */
/****************************************************************
**
** test_refstr_own(): Test basic H5RS (ref-counted strings) code.
** Tests transferring ownership of dynamically allocated strings
** to ref-counted strings.
**
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
****************************************************************/
static void
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
test_refstr_own(void)
{
H5RS_str_t *rs; /* Ref-counted string created */
char *s; /* Pointer to string to transfer */
const char *t; /* Temporary pointers to string */
int cmp; /* Comparison value */
herr_t ret; /* Generic return value */
/* Output message about test being performed */
MESSAGE(5, ("Testing Transferring Ref-Counted Strings\n"));
/* Initialize buffer */
s = (char *)H5FL_BLK_MALLOC(str_buf,HDstrlen("foo") + 1);
CHECK(s, NULL, "H5FL_BLK_MALLOC");
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
HDstrcpy(s, "foo");
/* Transfer ownership of dynamically allocated string to ref-counted string */
rs=H5RS_own(s);
CHECK(rs, NULL, "H5RS_own");
/* Get pointer to raw string in ref-counted string */
t=H5RS_get_str(rs);
CHECK(t, NULL, "H5RS_get_str");
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
VERIFY(t, s, "transferring");
cmp=HDstrcmp(s,t);
VERIFY(cmp, 0, "HDstrcmp");
/* Increment reference count (should NOT duplicate string) */
ret=H5RS_incr(rs);
CHECK(ret, FAIL, "H5RS_incr");
/* Change the buffer initially wrapped */
*s='F';
/* Get pointer to raw string in ref-counted string */
t=H5RS_get_str(rs);
CHECK(t, NULL, "H5RS_get_str");
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
VERIFY(t, s, "transferring");
cmp=HDstrcmp(t,s);
VERIFY(cmp, 0, "HDstrcmp");
/* Decrement reference count for string */
ret=H5RS_decr(rs);
CHECK(ret, FAIL, "H5RS_decr");
ret=H5RS_decr(rs);
CHECK(ret, FAIL, "H5RS_decr");
} /* end test_refstr_own() */
/****************************************************************
**
** test_refstr_finalize(): Test basic H5RS (ref-counted strings) code.
** Wrap up data for ref-counted string testing
**
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
****************************************************************/
static void
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
test_refstr_finalize(void)
{
} /* end test_refstr_finalize() */
/****************************************************************
**
** test_refstr(): Main H5RS testing routine.
**
[svn-r6252] Purpose: Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
2003-01-10 01:20:03 +08:00
****************************************************************/
void
test_refstr(void)
{
/* Output message about test being performed */
MESSAGE(5, ("Testing Reference Counted Strings\n"));
/* Initialize ref-counted strings testing data */
test_refstr_init();
/* Actual ref-counted strings tests */
test_refstr_create(); /* Test ref-counted string creation */
test_refstr_count(); /* Test ref-counted string counting */
test_refstr_dup(); /* Test ref-counted string duplication */
test_refstr_cmp(); /* Test ref-counted string comparison */
test_refstr_wrap(); /* Test ref-counted string wrapping */
test_refstr_own(); /* Test ref-counted string ownership transfer */
/* Finalize ref-counted strings testing data */
test_refstr_finalize();
} /* end test_refstr() */