hdf5/test/Makefile.in

2713 lines
109 KiB
Makefile
Raw Normal View History

# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html. COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page. It can also be found at
# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
#
# HDF5 Library Test Makefile(.in)
#
VPATH = @srcdir@
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(top_srcdir)/config/commence.am \
$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
$(srcdir)/testcheck_version.sh.in $(srcdir)/testerror.sh.in \
$(srcdir)/H5srcdir_str.h.in $(srcdir)/testlibinfo.sh.in \
$(srcdir)/testlinks_env.sh.in $(srcdir)/test_plugin.sh.in \
$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver \
COPYING
@HAVE_SHARED_CONDITIONAL_TRUE@am__append_1 = test_plugin.sh
@HAVE_SHARED_CONDITIONAL_TRUE@am__append_2 = plugin$(EXEEXT)
check_PROGRAMS = $(am__EXEEXT_1) error_test$(EXEEXT) \
err_compat$(EXEEXT) tcheck_version$(EXEEXT) testmeta$(EXEEXT) \
links_env$(EXEEXT) $(am__EXEEXT_2)
@HAVE_SHARED_CONDITIONAL_TRUE@am__append_3 = plugin
@BUILD_ALL_CONDITIONAL_TRUE@noinst_PROGRAMS = $(am__EXEEXT_3)
@DIRECT_VFD_CONDITIONAL_TRUE@am__append_4 = direct
TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
subdir = test
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/H5config.h
CONFIG_CLEAN_FILES = testcheck_version.sh testerror.sh H5srcdir_str.h \
testlibinfo.sh testlinks_env.sh test_plugin.sh
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(libdir)"
LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES)
libdynlib1_la_LIBADD =
am__libdynlib1_la_SOURCES_DIST = dynlib1.c
@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlib1_la_OBJECTS = dynlib1.lo
libdynlib1_la_OBJECTS = $(am_libdynlib1_la_OBJECTS)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 =
@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlib1_la_rpath = -rpath \
@HAVE_SHARED_CONDITIONAL_TRUE@ $(libdir)
libdynlib2_la_LIBADD =
am__libdynlib2_la_SOURCES_DIST = dynlib2.c
@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlib2_la_OBJECTS = dynlib2.lo
libdynlib2_la_OBJECTS = $(am_libdynlib2_la_OBJECTS)
@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlib2_la_rpath = -rpath \
@HAVE_SHARED_CONDITIONAL_TRUE@ $(libdir)
libdynlib3_la_LIBADD =
am__libdynlib3_la_SOURCES_DIST = dynlib3.c
@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlib3_la_OBJECTS = dynlib3.lo
libdynlib3_la_OBJECTS = $(am_libdynlib3_la_OBJECTS)
@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlib3_la_rpath = -rpath \
@HAVE_SHARED_CONDITIONAL_TRUE@ $(libdir)
libh5test_la_LIBADD =
am_libh5test_la_OBJECTS = h5test.lo testframe.lo cache_common.lo
libh5test_la_OBJECTS = $(am_libh5test_la_OBJECTS)
@HAVE_SHARED_CONDITIONAL_FALSE@am_libh5test_la_rpath =
@HAVE_SHARED_CONDITIONAL_TRUE@am_libh5test_la_rpath =
am__EXEEXT_1 = testhdf5$(EXEEXT) lheap$(EXEEXT) ohdr$(EXEEXT) \
stab$(EXEEXT) gheap$(EXEEXT) cache$(EXEEXT) cache_api$(EXEEXT) \
cache_tagging$(EXEEXT) pool$(EXEEXT) accum$(EXEEXT) \
hyperslab$(EXEEXT) istore$(EXEEXT) bittests$(EXEEXT) \
dt_arith$(EXEEXT) dtypes$(EXEEXT) dsets$(EXEEXT) \
cmpd_dset$(EXEEXT) filter_fail$(EXEEXT) extend$(EXEEXT) \
external$(EXEEXT) efc$(EXEEXT) objcopy$(EXEEXT) links$(EXEEXT) \
unlink$(EXEEXT) big$(EXEEXT) mtime$(EXEEXT) fillval$(EXEEXT) \
mount$(EXEEXT) flush1$(EXEEXT) flush2$(EXEEXT) \
app_ref$(EXEEXT) enum$(EXEEXT) set_extent$(EXEEXT) \
ttsafe$(EXEEXT) enc_dec_plist$(EXEEXT) \
enc_dec_plist_with_endianess$(EXEEXT) getname$(EXEEXT) \
vfd$(EXEEXT) ntypes$(EXEEXT) dangle$(EXEEXT) \
dtransform$(EXEEXT) reserved$(EXEEXT) cross_read$(EXEEXT) \
freespace$(EXEEXT) mf$(EXEEXT) farray$(EXEEXT) earray$(EXEEXT) \
btree2$(EXEEXT) fheap$(EXEEXT) file_image$(EXEEXT) \
unregister$(EXEEXT)
@HAVE_SHARED_CONDITIONAL_TRUE@am__EXEEXT_2 = plugin$(EXEEXT)
am__EXEEXT_3 = gen_bad_ohdr$(EXEEXT) gen_bogus$(EXEEXT) \
gen_cross$(EXEEXT) gen_deflate$(EXEEXT) gen_filters$(EXEEXT) \
gen_new_array$(EXEEXT) gen_new_fill$(EXEEXT) \
gen_new_group$(EXEEXT) gen_new_mtime$(EXEEXT) \
gen_new_super$(EXEEXT) gen_noencoder$(EXEEXT) \
gen_nullspace$(EXEEXT) gen_udlinks$(EXEEXT) \
space_overflow$(EXEEXT) gen_filespace$(EXEEXT) \
gen_specmetaread$(EXEEXT) gen_sizes_lheap$(EXEEXT) \
gen_file_image$(EXEEXT) gen_plist$(EXEEXT)
PROGRAMS = $(noinst_PROGRAMS)
accum_SOURCES = accum.c
accum_OBJECTS = accum.$(OBJEXT)
accum_LDADD = $(LDADD)
accum_DEPENDENCIES = libh5test.la $(LIBHDF5)
app_ref_SOURCES = app_ref.c
app_ref_OBJECTS = app_ref.$(OBJEXT)
app_ref_LDADD = $(LDADD)
app_ref_DEPENDENCIES = libh5test.la $(LIBHDF5)
big_SOURCES = big.c
big_OBJECTS = big.$(OBJEXT)
big_LDADD = $(LDADD)
big_DEPENDENCIES = libh5test.la $(LIBHDF5)
bittests_SOURCES = bittests.c
bittests_OBJECTS = bittests.$(OBJEXT)
bittests_LDADD = $(LDADD)
bittests_DEPENDENCIES = libh5test.la $(LIBHDF5)
btree2_SOURCES = btree2.c
btree2_OBJECTS = btree2.$(OBJEXT)
btree2_LDADD = $(LDADD)
btree2_DEPENDENCIES = libh5test.la $(LIBHDF5)
cache_SOURCES = cache.c
cache_OBJECTS = cache.$(OBJEXT)
cache_LDADD = $(LDADD)
cache_DEPENDENCIES = libh5test.la $(LIBHDF5)
cache_api_SOURCES = cache_api.c
cache_api_OBJECTS = cache_api.$(OBJEXT)
cache_api_LDADD = $(LDADD)
cache_api_DEPENDENCIES = libh5test.la $(LIBHDF5)
cache_tagging_SOURCES = cache_tagging.c
cache_tagging_OBJECTS = cache_tagging.$(OBJEXT)
cache_tagging_LDADD = $(LDADD)
cache_tagging_DEPENDENCIES = libh5test.la $(LIBHDF5)
cmpd_dset_SOURCES = cmpd_dset.c
cmpd_dset_OBJECTS = cmpd_dset.$(OBJEXT)
cmpd_dset_LDADD = $(LDADD)
cmpd_dset_DEPENDENCIES = libh5test.la $(LIBHDF5)
cross_read_SOURCES = cross_read.c
cross_read_OBJECTS = cross_read.$(OBJEXT)
cross_read_LDADD = $(LDADD)
cross_read_DEPENDENCIES = libh5test.la $(LIBHDF5)
dangle_SOURCES = dangle.c
dangle_OBJECTS = dangle.$(OBJEXT)
dangle_LDADD = $(LDADD)
dangle_DEPENDENCIES = libh5test.la $(LIBHDF5)
dsets_SOURCES = dsets.c
dsets_OBJECTS = dsets.$(OBJEXT)
dsets_LDADD = $(LDADD)
dsets_DEPENDENCIES = libh5test.la $(LIBHDF5)
dt_arith_SOURCES = dt_arith.c
dt_arith_OBJECTS = dt_arith.$(OBJEXT)
dt_arith_LDADD = $(LDADD)
dt_arith_DEPENDENCIES = libh5test.la $(LIBHDF5)
dtransform_SOURCES = dtransform.c
dtransform_OBJECTS = dtransform.$(OBJEXT)
dtransform_LDADD = $(LDADD)
dtransform_DEPENDENCIES = libh5test.la $(LIBHDF5)
dtypes_SOURCES = dtypes.c
dtypes_OBJECTS = dtypes.$(OBJEXT)
dtypes_LDADD = $(LDADD)
dtypes_DEPENDENCIES = libh5test.la $(LIBHDF5)
earray_SOURCES = earray.c
earray_OBJECTS = earray.$(OBJEXT)
earray_LDADD = $(LDADD)
earray_DEPENDENCIES = libh5test.la $(LIBHDF5)
efc_SOURCES = efc.c
efc_OBJECTS = efc.$(OBJEXT)
efc_LDADD = $(LDADD)
efc_DEPENDENCIES = libh5test.la $(LIBHDF5)
enc_dec_plist_SOURCES = enc_dec_plist.c
enc_dec_plist_OBJECTS = enc_dec_plist.$(OBJEXT)
enc_dec_plist_LDADD = $(LDADD)
enc_dec_plist_DEPENDENCIES = libh5test.la $(LIBHDF5)
enc_dec_plist_with_endianess_SOURCES = enc_dec_plist_with_endianess.c
enc_dec_plist_with_endianess_OBJECTS = \
enc_dec_plist_with_endianess.$(OBJEXT)
enc_dec_plist_with_endianess_LDADD = $(LDADD)
enc_dec_plist_with_endianess_DEPENDENCIES = libh5test.la $(LIBHDF5)
enum_SOURCES = enum.c
enum_OBJECTS = enum.$(OBJEXT)
enum_LDADD = $(LDADD)
enum_DEPENDENCIES = libh5test.la $(LIBHDF5)
err_compat_SOURCES = err_compat.c
err_compat_OBJECTS = err_compat.$(OBJEXT)
err_compat_LDADD = $(LDADD)
err_compat_DEPENDENCIES = libh5test.la $(LIBHDF5)
error_test_SOURCES = error_test.c
error_test_OBJECTS = error_test.$(OBJEXT)
error_test_LDADD = $(LDADD)
error_test_DEPENDENCIES = libh5test.la $(LIBHDF5)
extend_SOURCES = extend.c
extend_OBJECTS = extend.$(OBJEXT)
extend_LDADD = $(LDADD)
extend_DEPENDENCIES = libh5test.la $(LIBHDF5)
external_SOURCES = external.c
external_OBJECTS = external.$(OBJEXT)
external_LDADD = $(LDADD)
external_DEPENDENCIES = libh5test.la $(LIBHDF5)
farray_SOURCES = farray.c
farray_OBJECTS = farray.$(OBJEXT)
farray_LDADD = $(LDADD)
farray_DEPENDENCIES = libh5test.la $(LIBHDF5)
fheap_SOURCES = fheap.c
fheap_OBJECTS = fheap.$(OBJEXT)
fheap_LDADD = $(LDADD)
fheap_DEPENDENCIES = libh5test.la $(LIBHDF5)
file_image_SOURCES = file_image.c
file_image_OBJECTS = file_image.$(OBJEXT)
file_image_LDADD = $(LDADD)
file_image_DEPENDENCIES = libh5test.la $(LIBHDF5)
fillval_SOURCES = fillval.c
fillval_OBJECTS = fillval.$(OBJEXT)
fillval_LDADD = $(LDADD)
fillval_DEPENDENCIES = libh5test.la $(LIBHDF5)
filter_fail_SOURCES = filter_fail.c
filter_fail_OBJECTS = filter_fail.$(OBJEXT)
filter_fail_LDADD = $(LDADD)
filter_fail_DEPENDENCIES = libh5test.la $(LIBHDF5)
flush1_SOURCES = flush1.c
flush1_OBJECTS = flush1.$(OBJEXT)
flush1_LDADD = $(LDADD)
flush1_DEPENDENCIES = libh5test.la $(LIBHDF5)
flush2_SOURCES = flush2.c
flush2_OBJECTS = flush2.$(OBJEXT)
flush2_LDADD = $(LDADD)
flush2_DEPENDENCIES = libh5test.la $(LIBHDF5)
freespace_SOURCES = freespace.c
freespace_OBJECTS = freespace.$(OBJEXT)
freespace_LDADD = $(LDADD)
freespace_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_bad_ohdr_SOURCES = gen_bad_ohdr.c
gen_bad_ohdr_OBJECTS = gen_bad_ohdr.$(OBJEXT)
gen_bad_ohdr_LDADD = $(LDADD)
gen_bad_ohdr_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_bogus_SOURCES = gen_bogus.c
gen_bogus_OBJECTS = gen_bogus.$(OBJEXT)
gen_bogus_LDADD = $(LDADD)
gen_bogus_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_cross_SOURCES = gen_cross.c
gen_cross_OBJECTS = gen_cross.$(OBJEXT)
gen_cross_LDADD = $(LDADD)
gen_cross_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_deflate_SOURCES = gen_deflate.c
gen_deflate_OBJECTS = gen_deflate.$(OBJEXT)
gen_deflate_LDADD = $(LDADD)
gen_deflate_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_file_image_SOURCES = gen_file_image.c
gen_file_image_OBJECTS = gen_file_image.$(OBJEXT)
gen_file_image_LDADD = $(LDADD)
gen_file_image_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_filespace_SOURCES = gen_filespace.c
gen_filespace_OBJECTS = gen_filespace.$(OBJEXT)
gen_filespace_LDADD = $(LDADD)
gen_filespace_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_filters_SOURCES = gen_filters.c
gen_filters_OBJECTS = gen_filters.$(OBJEXT)
gen_filters_LDADD = $(LDADD)
gen_filters_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_new_array_SOURCES = gen_new_array.c
gen_new_array_OBJECTS = gen_new_array.$(OBJEXT)
gen_new_array_LDADD = $(LDADD)
gen_new_array_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_new_fill_SOURCES = gen_new_fill.c
gen_new_fill_OBJECTS = gen_new_fill.$(OBJEXT)
gen_new_fill_LDADD = $(LDADD)
gen_new_fill_DEPENDENCIES = libh5test.la $(LIBHDF5)
2005-11-15 10:55:39 +08:00
gen_new_group_SOURCES = gen_new_group.c
gen_new_group_OBJECTS = gen_new_group.$(OBJEXT)
gen_new_group_LDADD = $(LDADD)
gen_new_group_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_new_mtime_SOURCES = gen_new_mtime.c
gen_new_mtime_OBJECTS = gen_new_mtime.$(OBJEXT)
gen_new_mtime_LDADD = $(LDADD)
gen_new_mtime_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_new_super_SOURCES = gen_new_super.c
gen_new_super_OBJECTS = gen_new_super.$(OBJEXT)
gen_new_super_LDADD = $(LDADD)
gen_new_super_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_noencoder_SOURCES = gen_noencoder.c
gen_noencoder_OBJECTS = gen_noencoder.$(OBJEXT)
gen_noencoder_LDADD = $(LDADD)
gen_noencoder_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_nullspace_SOURCES = gen_nullspace.c
gen_nullspace_OBJECTS = gen_nullspace.$(OBJEXT)
gen_nullspace_LDADD = $(LDADD)
gen_nullspace_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_plist_SOURCES = gen_plist.c
gen_plist_OBJECTS = gen_plist.$(OBJEXT)
gen_plist_LDADD = $(LDADD)
gen_plist_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_sizes_lheap_SOURCES = gen_sizes_lheap.c
gen_sizes_lheap_OBJECTS = gen_sizes_lheap.$(OBJEXT)
gen_sizes_lheap_LDADD = $(LDADD)
gen_sizes_lheap_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_specmetaread_SOURCES = gen_specmetaread.c
gen_specmetaread_OBJECTS = gen_specmetaread.$(OBJEXT)
gen_specmetaread_LDADD = $(LDADD)
gen_specmetaread_DEPENDENCIES = libh5test.la $(LIBHDF5)
gen_udlinks_SOURCES = gen_udlinks.c
gen_udlinks_OBJECTS = gen_udlinks.$(OBJEXT)
gen_udlinks_LDADD = $(LDADD)
gen_udlinks_DEPENDENCIES = libh5test.la $(LIBHDF5)
getname_SOURCES = getname.c
getname_OBJECTS = getname.$(OBJEXT)
getname_LDADD = $(LDADD)
getname_DEPENDENCIES = libh5test.la $(LIBHDF5)
gheap_SOURCES = gheap.c
gheap_OBJECTS = gheap.$(OBJEXT)
gheap_LDADD = $(LDADD)
gheap_DEPENDENCIES = libh5test.la $(LIBHDF5)
hyperslab_SOURCES = hyperslab.c
hyperslab_OBJECTS = hyperslab.$(OBJEXT)
hyperslab_LDADD = $(LDADD)
hyperslab_DEPENDENCIES = libh5test.la $(LIBHDF5)
istore_SOURCES = istore.c
istore_OBJECTS = istore.$(OBJEXT)
istore_LDADD = $(LDADD)
istore_DEPENDENCIES = libh5test.la $(LIBHDF5)
lheap_SOURCES = lheap.c
lheap_OBJECTS = lheap.$(OBJEXT)
lheap_LDADD = $(LDADD)
lheap_DEPENDENCIES = libh5test.la $(LIBHDF5)
links_SOURCES = links.c
links_OBJECTS = links.$(OBJEXT)
links_LDADD = $(LDADD)
links_DEPENDENCIES = libh5test.la $(LIBHDF5)
links_env_SOURCES = links_env.c
links_env_OBJECTS = links_env.$(OBJEXT)
links_env_LDADD = $(LDADD)
links_env_DEPENDENCIES = libh5test.la $(LIBHDF5)
mf_SOURCES = mf.c
mf_OBJECTS = mf.$(OBJEXT)
mf_LDADD = $(LDADD)
mf_DEPENDENCIES = libh5test.la $(LIBHDF5)
mount_SOURCES = mount.c
mount_OBJECTS = mount.$(OBJEXT)
mount_LDADD = $(LDADD)
mount_DEPENDENCIES = libh5test.la $(LIBHDF5)
mtime_SOURCES = mtime.c
mtime_OBJECTS = mtime.$(OBJEXT)
mtime_LDADD = $(LDADD)
mtime_DEPENDENCIES = libh5test.la $(LIBHDF5)
ntypes_SOURCES = ntypes.c
ntypes_OBJECTS = ntypes.$(OBJEXT)
ntypes_LDADD = $(LDADD)
ntypes_DEPENDENCIES = libh5test.la $(LIBHDF5)
objcopy_SOURCES = objcopy.c
objcopy_OBJECTS = objcopy.$(OBJEXT)
objcopy_LDADD = $(LDADD)
objcopy_DEPENDENCIES = libh5test.la $(LIBHDF5)
ohdr_SOURCES = ohdr.c
ohdr_OBJECTS = ohdr.$(OBJEXT)
ohdr_LDADD = $(LDADD)
ohdr_DEPENDENCIES = libh5test.la $(LIBHDF5)
plugin_SOURCES = plugin.c
plugin_OBJECTS = plugin.$(OBJEXT)
plugin_LDADD = $(LDADD)
plugin_DEPENDENCIES = libh5test.la $(LIBHDF5)
pool_SOURCES = pool.c
pool_OBJECTS = pool.$(OBJEXT)
pool_LDADD = $(LDADD)
pool_DEPENDENCIES = libh5test.la $(LIBHDF5)
reserved_SOURCES = reserved.c
reserved_OBJECTS = reserved.$(OBJEXT)
reserved_LDADD = $(LDADD)
reserved_DEPENDENCIES = libh5test.la $(LIBHDF5)
set_extent_SOURCES = set_extent.c
set_extent_OBJECTS = set_extent.$(OBJEXT)
set_extent_LDADD = $(LDADD)
set_extent_DEPENDENCIES = libh5test.la $(LIBHDF5)
space_overflow_SOURCES = space_overflow.c
space_overflow_OBJECTS = space_overflow.$(OBJEXT)
space_overflow_LDADD = $(LDADD)
space_overflow_DEPENDENCIES = libh5test.la $(LIBHDF5)
stab_SOURCES = stab.c
stab_OBJECTS = stab.$(OBJEXT)
stab_LDADD = $(LDADD)
stab_DEPENDENCIES = libh5test.la $(LIBHDF5)
tcheck_version_SOURCES = tcheck_version.c
tcheck_version_OBJECTS = tcheck_version.$(OBJEXT)
tcheck_version_LDADD = $(LDADD)
tcheck_version_DEPENDENCIES = libh5test.la $(LIBHDF5)
am_testhdf5_OBJECTS = testhdf5.$(OBJEXT) tarray.$(OBJEXT) \
tattr.$(OBJEXT) tchecksum.$(OBJEXT) tconfig.$(OBJEXT) \
tfile.$(OBJEXT) tgenprop.$(OBJEXT) th5o.$(OBJEXT) \
th5s.$(OBJEXT) tcoords.$(OBJEXT) theap.$(OBJEXT) tid.$(OBJEXT) \
titerate.$(OBJEXT) tmeta.$(OBJEXT) tmisc.$(OBJEXT) \
trefer.$(OBJEXT) trefstr.$(OBJEXT) tselect.$(OBJEXT) \
tskiplist.$(OBJEXT) tsohm.$(OBJEXT) ttime.$(OBJEXT) \
ttst.$(OBJEXT) tunicode.$(OBJEXT) tvlstr.$(OBJEXT) \
tvltypes.$(OBJEXT)
testhdf5_OBJECTS = $(am_testhdf5_OBJECTS)
testhdf5_LDADD = $(LDADD)
testhdf5_DEPENDENCIES = libh5test.la $(LIBHDF5)
testmeta_SOURCES = testmeta.c
testmeta_OBJECTS = testmeta.$(OBJEXT)
testmeta_LDADD = $(LDADD)
testmeta_DEPENDENCIES = libh5test.la $(LIBHDF5)
am_ttsafe_OBJECTS = ttsafe.$(OBJEXT) ttsafe_dcreate.$(OBJEXT) \
ttsafe_error.$(OBJEXT) ttsafe_cancel.$(OBJEXT) \
ttsafe_acreate.$(OBJEXT)
ttsafe_OBJECTS = $(am_ttsafe_OBJECTS)
ttsafe_LDADD = $(LDADD)
ttsafe_DEPENDENCIES = libh5test.la $(LIBHDF5)
unlink_SOURCES = unlink.c
unlink_OBJECTS = unlink.$(OBJEXT)
unlink_LDADD = $(LDADD)
unlink_DEPENDENCIES = libh5test.la $(LIBHDF5)
unregister_SOURCES = unregister.c
unregister_OBJECTS = unregister.$(OBJEXT)
unregister_LDADD = $(LDADD)
unregister_DEPENDENCIES = libh5test.la $(LIBHDF5)
vfd_SOURCES = vfd.c
vfd_OBJECTS = vfd.$(OBJEXT)
vfd_LDADD = $(LDADD)
vfd_DEPENDENCIES = libh5test.la $(LIBHDF5)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src
depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(libdynlib1_la_SOURCES) $(libdynlib2_la_SOURCES) \
$(libdynlib3_la_SOURCES) $(libh5test_la_SOURCES) accum.c \
app_ref.c big.c bittests.c btree2.c cache.c cache_api.c \
cache_tagging.c cmpd_dset.c cross_read.c dangle.c dsets.c \
dt_arith.c dtransform.c dtypes.c earray.c efc.c \
enc_dec_plist.c enc_dec_plist_with_endianess.c enum.c \
err_compat.c error_test.c extend.c external.c farray.c fheap.c \
file_image.c fillval.c filter_fail.c flush1.c flush2.c \
freespace.c gen_bad_ohdr.c gen_bogus.c gen_cross.c \
gen_deflate.c gen_file_image.c gen_filespace.c gen_filters.c \
gen_new_array.c gen_new_fill.c gen_new_group.c gen_new_mtime.c \
gen_new_super.c gen_noencoder.c gen_nullspace.c gen_plist.c \
gen_sizes_lheap.c gen_specmetaread.c gen_udlinks.c getname.c \
gheap.c hyperslab.c istore.c lheap.c links.c links_env.c mf.c \
mount.c mtime.c ntypes.c objcopy.c ohdr.c plugin.c pool.c \
reserved.c set_extent.c space_overflow.c stab.c \
tcheck_version.c $(testhdf5_SOURCES) testmeta.c \
$(ttsafe_SOURCES) unlink.c unregister.c vfd.c
DIST_SOURCES = $(am__libdynlib1_la_SOURCES_DIST) \
$(am__libdynlib2_la_SOURCES_DIST) \
$(am__libdynlib3_la_SOURCES_DIST) $(libh5test_la_SOURCES) \
accum.c app_ref.c big.c bittests.c btree2.c cache.c \
cache_api.c cache_tagging.c cmpd_dset.c cross_read.c dangle.c \
dsets.c dt_arith.c dtransform.c dtypes.c earray.c efc.c \
enc_dec_plist.c enc_dec_plist_with_endianess.c enum.c \
err_compat.c error_test.c extend.c external.c farray.c fheap.c \
file_image.c fillval.c filter_fail.c flush1.c flush2.c \
freespace.c gen_bad_ohdr.c gen_bogus.c gen_cross.c \
gen_deflate.c gen_file_image.c gen_filespace.c gen_filters.c \
gen_new_array.c gen_new_fill.c gen_new_group.c gen_new_mtime.c \
gen_new_super.c gen_noencoder.c gen_nullspace.c gen_plist.c \
gen_sizes_lheap.c gen_specmetaread.c gen_udlinks.c getname.c \
gheap.c hyperslab.c istore.c lheap.c links.c links_env.c mf.c \
mount.c mtime.c ntypes.c objcopy.c ohdr.c plugin.c pool.c \
reserved.c set_extent.c space_overflow.c stab.c \
tcheck_version.c $(testhdf5_SOURCES) testmeta.c \
$(ttsafe_SOURCES) unlink.c unregister.c vfd.c
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__tty_colors_dummy = \
mgn= red= grn= lgn= blu= brg= std=; \
am__color_tests=no
am__tty_colors = { \
$(am__tty_colors_dummy); \
if test "X$(AM_COLOR_TESTS)" = Xno; then \
am__color_tests=no; \
elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
am__color_tests=yes; \
elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
am__color_tests=yes; \
fi; \
if test $$am__color_tests = yes; then \
red=''; \
grn=''; \
lgn=''; \
blu=''; \
mgn=''; \
brg=''; \
std=''; \
fi; \
}
am__recheck_rx = ^[ ]*:recheck:[ ]*
am__global_test_result_rx = ^[ ]*:global-test-result:[ ]*
am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
recheck = 1; \
while ((rc = (getline line < ($$0 ".trs"))) != 0) \
{ \
if (rc < 0) \
{ \
if ((getline line2 < ($$0 ".log")) < 0) \
recheck = 0; \
break; \
} \
else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
{ \
recheck = 0; \
break; \
} \
else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
{ \
break; \
} \
}; \
if (recheck) \
print $$0; \
close ($$0 ".trs"); \
close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
print "fatal: making $@: " msg | "cat >&2"; \
exit 1; \
} \
function rst_section(header) \
{ \
print header; \
len = length(header); \
for (i = 1; i <= len; i = i + 1) \
printf "="; \
printf "\n\n"; \
} \
{ \
copy_in_global_log = 1; \
global_test_result = "RUN"; \
while ((rc = (getline line < ($$0 ".trs"))) != 0) \
{ \
if (rc < 0) \
fatal("failed to read from " $$0 ".trs"); \
if (line ~ /$(am__global_test_result_rx)/) \
{ \
sub("$(am__global_test_result_rx)", "", line); \
sub("[ ]*$$", "", line); \
global_test_result = line; \
} \
else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
copy_in_global_log = 0; \
}; \
if (copy_in_global_log) \
{ \
rst_section(global_test_result ": " $$0); \
while ((rc = (getline line < ($$0 ".log"))) != 0) \
{ \
if (rc < 0) \
fatal("failed to read from " $$0 ".log"); \
print line; \
}; \
printf "\n"; \
}; \
close ($$0 ".trs"); \
close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
--color-tests "$$am__color_tests" \
--enable-hard-errors "$$am__enable_hard_errors" \
--expect-failure "$$am__expect_failure"
# To be inserted before the command running the test. Creates the
# directory for the log if needed. Stores in $dir the directory
# containing $f, in $tst the test, in $log the log. Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup); \
$(am__vpath_adj_setup) $(am__vpath_adj) \
$(am__tty_colors); \
srcdir=$(srcdir); export srcdir; \
case "$@" in \
*/*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
*) am__odir=.;; \
esac; \
test "x$$am__odir" = x"." || test -d "$$am__odir" \
|| $(MKDIR_P) "$$am__odir" || exit $$?; \
if test -f "./$$f"; then dir=./; \
elif test -f "$$f"; then dir=; \
else dir="$(srcdir)/"; fi; \
tst=$$dir$$f; log='$@'; \
if test -n '$(DISABLE_HARD_ERRORS)'; then \
am__enable_hard_errors=no; \
else \
am__enable_hard_errors=yes; \
fi; \
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
am__expect_failure=yes;; \
*) \
am__expect_failure=no;; \
esac; \
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed). The result is saved in the shell variable
# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
bases='$(TEST_LOGS)'; \
bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
AM_RECURSIVE_TARGETS = check recheck
TEST_SUITE_LOG = test-suite.log
LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
case '$@' in \
*/*) \
case '$*' in \
*/*) b='$*';; \
*) b=`echo '$@' | sed 's/\.log$$//'`; \
esac;; \
*) \
b='$*';; \
esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.sh.log=.log)
SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMTAR = @AMTAR@
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
# H5_CFLAGS holds flags that should be used when building hdf5,
# but which should not be exported to h5cc for building other programs.
# AM_CFLAGS is an automake construct which should be used by Makefiles
# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
-I$(top_builddir)/src
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BYTESEX = @BYTESEX@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_VERSION = @CC_VERSION@
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
CFLAGS = @CFLAGS@
CLEARFILEBUF = @CLEARFILEBUF@
CODESTACK = @CODESTACK@
CONFIG_DATE = @CONFIG_DATE@
CONFIG_MODE = @CONFIG_MODE@
CONFIG_USER = @CONFIG_USER@
CPP = @CPP@
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
CXXFLAGS = @CXXFLAGS@
CXX_VERSION = @CXX_VERSION@
CYGPATH_W = @CYGPATH_W@
DEBUG_PKG = @DEBUG_PKG@
DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
DIRECT_VFD = @DIRECT_VFD@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
DYNAMIC_DIRS = @DYNAMIC_DIRS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
# Make sure that these variables are exported to the Makefiles
F9XMODEXT = @F9XMODEXT@
F9XMODFLAG = @F9XMODFLAG@
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
FC = @FC@
FC2003 = @FC2003@
[svn-r17616] Purpose: CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
2009-10-08 23:17:30 +08:00
FCFLAGS = @FCFLAGS@
FCFLAGS_f90 = @FCFLAGS_f90@
FCLIBS = @FCLIBS@
FC_VERSION = @FC_VERSION@
FGREP = @FGREP@
FILTERS = @FILTERS@
FSEARCH_DIRS = @FSEARCH_DIRS@
GREP = @GREP@
H5_CFLAGS = @H5_CFLAGS@
H5_CPPFLAGS = @H5_CPPFLAGS@
H5_CXXFLAGS = @H5_CXXFLAGS@
H5_CXX_SHARED = @H5_CXX_SHARED@
H5_FCFLAGS = @H5_FCFLAGS@
H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
H5_LDFLAGS = @H5_LDFLAGS@
H5_LONE_COLON = @H5_LONE_COLON@
H5_VERSION = @H5_VERSION@
HADDR_T = @HADDR_T@
HAVE_DMALLOC = @HAVE_DMALLOC@
HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@
HAVE_PTHREAD = @HAVE_PTHREAD@
HDF5_HL = @HDF5_HL@
HDF5_INTERFACES = @HDF5_INTERFACES@
HDF_CXX = @HDF_CXX@
HDF_FORTRAN = @HDF_FORTRAN@
HDF_FORTRAN2003 = @HDF_FORTRAN2003@
HID_T = @HID_T@
HL = @HL@
HL_FOR = @HL_FOR@
HSIZE_T = @HSIZE_T@
HSSIZE_T = @HSSIZE_T@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTRUMENT = @INSTRUMENT@
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
LARGEFILE = @LARGEFILE@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LL_PATH = @LL_PATH@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_STATIC_EXEC = @LT_STATIC_EXEC@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MPE = @MPE@
MPI_GET_SIZE = @MPI_GET_SIZE@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PARALLEL = @PARALLEL@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
RANLIB = @RANLIB@
ROOT = @ROOT@
RUNPARALLEL = @RUNPARALLEL@
RUNSERIAL = @RUNSERIAL@
R_INTEGER = @R_INTEGER@
R_LARGE = @R_LARGE@
SEARCH = @SEARCH@
SED = @SED@
SETX = @SETX@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIZE_T = @SIZE_T@
STATIC_EXEC = @STATIC_EXEC@
STATIC_SHARED = @STATIC_SHARED@
STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
STRIP = @STRIP@
TESTPARALLEL = @TESTPARALLEL@
THREADSAFE = @THREADSAFE@
TIME = @TIME@
TR = @TR@
TRACE_API = @TRACE_API@
UNAME_INFO = @UNAME_INFO@
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
USE_FILTER_NBIT = @USE_FILTER_NBIT@
USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@
USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
USE_FILTER_SZIP = @USE_FILTER_SZIP@
USINGMEMCHECKER = @USINGMEMCHECKER@
VERSION = @VERSION@
WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
ac_ct_FC = @ac_ct_FC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
# Install directories that automake doesn't know about
docdir = $(exec_prefix)/doc
dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
# Shell commands used in Makefiles
RM = rm -f
CP = cp
# Some machines need a command to run executables; this is that command
# so that our tests will run.
# We use RUNEXEC instead of RUNSERIAL directly because it may be that
# some tests need to be run with a different command. Older versions
# of the makefiles used the command
# $(LIBTOOL) --mode=execute
# in some directories, for instance.
RUNEXEC = $(RUNSERIAL)
# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below
# has been removed. According to the official description of DESTDIR by Gnu at
# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is
# prepended to the normal and complete install path that it precedes for the
# purpose of installing in a temporary directory which is useful for building
# rpms and other packages. The '/' after ${DESTDIR} will be followed by another
# '/' at the beginning of the normal install path. When DESTDIR is empty the
# path then begins with '//', which is incorrect and causes problems at least for
# Cygwin.
# Scripts used to build examples
# If only shared libraries have been installed, have h5cc build examples with
# shared libraries instead of static libraries
H5CC = ${DESTDIR}$(bindir)/h5cc
H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
H5FC = ${DESTDIR}$(bindir)/h5fc
H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
H5CPP = ${DESTDIR}$(bindir)/h5c++
ACLOCAL_AMFLAGS = "-I m4"
# The trace script; this is used on source files from the C library to
# insert tracing macros.
TRACE = perl $(top_srcdir)/bin/trace
# .chkexe files are used to mark tests that have run successfully.
# .chklog files are output from those tests.
# *.clog are from the MPE option.
# Temporary files. These files are the ones created by setting the
# HDF5_NOCLEANUP environment variable and running `make test' without
# specifying a file prefix or low-level driver. Changing the file
# prefix or low-level driver with environment variables will influence
# the temporary file name in ways that the makefile is not aware of.
CHECK_CLEANFILES = *.chkexe *.chklog *.clog accum.h5 cmpd_dset.h5 \
compact_dataset.h5 dataset.h5 dset_offset.h5 \
max_compact_dataset.h5 simple.h5 set_local.h5 random_chunks.h5 \
huge_chunks.h5 chunk_cache.h5 big_chunk.h5 chunk_expand.h5 \
copy_dcpl_newfile.h5 extend.h5 istore.h5 extlinks*.h5 \
frspace.h5 links*.h5 sys_file1 tfile[1-7].h5 th5s[1-4].h5 \
lheap.h5 fheap.h5 ohdr.h5 stab.h5 extern_[1-3].h5 \
extern_[1-4][ab].raw gheap[0-4].h5 dt_arith[1-2] links.h5 \
links[0-6]*.h5 extlinks[0-15].h5 tmp big.data \
big[0-9][0-9][0-9][0-9][0-9].h5 stdio.h5 sec2.h5 \
dtypes[0-9].h5 dtypes1[0].h5 dt_arith[1-2].h5 tattr.h5 \
tselect.h5 mtime.h5 unlink.h5 unicode.h5 coord.h5 \
fillval_[0-9].h5 fillval.raw mount_[0-9].h5 testmeta.h5 \
ttime.h5 trefer[1-3].h5 tvltypes.h5 tvlstr.h5 tvlstr2.h5 \
flush.h5 enum1.h5 titerate.h5 ttsafe.h5 tarray1.h5 tgenprop.h5 \
tmisc[0-9]*.h5 set_extent[1-5].h5 ext[12].bin getname.h5 \
getname[1-3].h5 sec2_file.h5 direct_file.h5 \
family_file000[0-3][0-9].h5 new_family_v16_000[0-3][0-9].h5 \
multi_file-[rs].h5 core_file plugin.h5 new_move_[ab].h5 \
ntypes.h5 dangle.h5 error_test.h5 err_compat.h5 dtransform.h5 \
test_filters.h5 get_file_name.h5 tstint[1-2].h5 \
unlink_chunked.h5 btree2.h5 objcopy_src.h5 objcopy_dst.h5 \
objcopy_ext.dat trefer1.h5 trefer2.h5 app_ref.h5 farray.h5 \
earray.h5 efc[0-5].h5 log_vfd_out.log new_multi_file_v16-r.h5 \
new_multi_file_v16-s.h5 split_get_file_image_test-m.h5 \
split_get_file_image_test-r.h5 file_image_core_test.h5.copy \
unregister_filter_1.h5 unregister_filter_2.h5
# Test script for error_test and err_compat
TEST_SCRIPT = testerror.sh testlibinfo.sh testcheck_version.sh \
testlinks_env.sh $(am__append_1)
SCRIPT_DEPEND = error_test$(EXEEXT) err_compat$(EXEEXT) \
links_env$(EXEEXT) $(am__append_2)
check_SCRIPTS = $(TEST_SCRIPT)
# These are our main targets. They should be listed in the order to be
# executed, generally most specific tests to least specific tests.
# As an exception, long-running tests should occur earlier in the list.
# This gives them more time to run when tests are executing in parallel.
# These tests (fheap, btree2) are under development and are not used by
# the library yet. Move them to the end so that their failure do not block
# other current library code tests.
TEST_PROG = testhdf5 lheap ohdr stab gheap cache cache_api cache_tagging \
pool accum hyperslab istore bittests dt_arith \
dtypes dsets cmpd_dset filter_fail extend external efc objcopy links unlink \
big mtime fillval mount flush1 flush2 app_ref enum \
set_extent ttsafe enc_dec_plist enc_dec_plist_with_endianess\
getname vfd ntypes dangle dtransform reserved cross_read \
freespace mf farray earray btree2 fheap file_image unregister
# These programs generate test files for the tests. They don't need to be
# compiled every time we want to test the library. However, putting
# them in a conditional causes automake to generate rules so that they
# can be built by hand. They can also be built by specifying
# --enable-build-all at configure time.
# The gen_old_* files can only be compiled with older versions of the library
# so do not appear in this list.
BUILD_ALL_PROGS = gen_bad_ohdr gen_bogus gen_cross gen_deflate gen_filters gen_new_array \
gen_new_fill gen_new_group gen_new_mtime gen_new_super gen_noencoder \
gen_nullspace gen_udlinks space_overflow gen_filespace gen_specmetaread \
gen_sizes_lheap gen_file_image gen_plist
@HAVE_SHARED_CONDITIONAL_FALSE@noinst_LTLIBRARIES = libh5test.la
@HAVE_SHARED_CONDITIONAL_TRUE@noinst_LTLIBRARIES = libh5test.la
@HAVE_SHARED_CONDITIONAL_TRUE@lib_LTLIBRARIES = libdynlib1.la libdynlib2.la libdynlib3.la
@HAVE_SHARED_CONDITIONAL_TRUE@libdynlib1_la_SOURCES = dynlib1.c
@HAVE_SHARED_CONDITIONAL_TRUE@libdynlib2_la_SOURCES = dynlib2.c
@HAVE_SHARED_CONDITIONAL_TRUE@libdynlib3_la_SOURCES = dynlib3.c
libh5test_la_SOURCES = h5test.c testframe.c cache_common.c
# Use libhd5test.la to compile all of the tests
LDADD = libh5test.la $(LIBHDF5)
# List the source files for tests that have more than one
ttsafe_SOURCES = ttsafe.c ttsafe_dcreate.c ttsafe_error.c ttsafe_cancel.c \
ttsafe_acreate.c
VFD_LIST = sec2 stdio core core_paged split multi family \
$(am__append_4)
# Sources for testhdf5 executable
testhdf5_SOURCES = testhdf5.c tarray.c tattr.c tchecksum.c tconfig.c tfile.c \
tgenprop.c th5o.c th5s.c tcoords.c theap.c tid.c titerate.c tmeta.c tmisc.c \
trefer.c trefstr.c tselect.c tskiplist.c tsohm.c ttime.c ttst.c tunicode.c \
tvlstr.c tvltypes.c
# Temporary files.
DISTCLEANFILES = testerror.sh testlibinfo.sh testcheck_version.sh testlinks_env.sh test_plugin.sh
# Automake needs to be taught how to build lib, progs, and tests targets.
# These will be filled in automatically for the most part (e.g.,
# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
# EXTRA_TEST variables are supplied to allow the user to force targets to
# be built at certain times.
LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \
$(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \
$(EXTRA_PROG)
chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST)
TEST_EXTENSIONS = .sh
SH_LOG_COMPILER = $(SHELL)
AM_SH_LOG_FLAGS =
TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
all: all-am
.SUFFIXES:
.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign test/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
testcheck_version.sh: $(top_builddir)/config.status $(srcdir)/testcheck_version.sh.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
testerror.sh: $(top_builddir)/config.status $(srcdir)/testerror.sh.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
H5srcdir_str.h: $(top_builddir)/config.status $(srcdir)/H5srcdir_str.h.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
testlibinfo.sh: $(top_builddir)/config.status $(srcdir)/testlibinfo.sh.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
testlinks_env.sh: $(top_builddir)/config.status $(srcdir)/testlinks_env.sh.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
test_plugin.sh: $(top_builddir)/config.status $(srcdir)/test_plugin.sh.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
@$(NORMAL_INSTALL)
@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
list2="$$list2 $$p"; \
else :; fi; \
done; \
test -z "$$list2" || { \
echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
}
uninstall-libLTLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
done
clean-libLTLIBRARIES:
-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
@list='$(lib_LTLIBRARIES)'; \
locs=`for p in $$list; do echo $$p; done | \
sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
sort -u`; \
test -z "$$locs" || { \
echo rm -f $${locs}; \
rm -f $${locs}; \
}
clean-noinstLTLIBRARIES:
-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@list='$(noinst_LTLIBRARIES)'; \
locs=`for p in $$list; do echo $$p; done | \
sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
sort -u`; \
test -z "$$locs" || { \
echo rm -f $${locs}; \
rm -f $${locs}; \
}
libdynlib1.la: $(libdynlib1_la_OBJECTS) $(libdynlib1_la_DEPENDENCIES) $(EXTRA_libdynlib1_la_DEPENDENCIES)
$(AM_V_CCLD)$(LINK) $(am_libdynlib1_la_rpath) $(libdynlib1_la_OBJECTS) $(libdynlib1_la_LIBADD) $(LIBS)
libdynlib2.la: $(libdynlib2_la_OBJECTS) $(libdynlib2_la_DEPENDENCIES) $(EXTRA_libdynlib2_la_DEPENDENCIES)
$(AM_V_CCLD)$(LINK) $(am_libdynlib2_la_rpath) $(libdynlib2_la_OBJECTS) $(libdynlib2_la_LIBADD) $(LIBS)
libdynlib3.la: $(libdynlib3_la_OBJECTS) $(libdynlib3_la_DEPENDENCIES) $(EXTRA_libdynlib3_la_DEPENDENCIES)
$(AM_V_CCLD)$(LINK) $(am_libdynlib3_la_rpath) $(libdynlib3_la_OBJECTS) $(libdynlib3_la_LIBADD) $(LIBS)
libh5test.la: $(libh5test_la_OBJECTS) $(libh5test_la_DEPENDENCIES) $(EXTRA_libh5test_la_DEPENDENCIES)
$(AM_V_CCLD)$(LINK) $(am_libh5test_la_rpath) $(libh5test_la_OBJECTS) $(libh5test_la_LIBADD) $(LIBS)
clean-checkPROGRAMS:
@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
echo " rm -f" $$list; \
rm -f $$list || exit $$?; \
test -n "$(EXEEXT)" || exit 0; \
list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
echo " rm -f" $$list; \
rm -f $$list
clean-noinstPROGRAMS:
@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
echo " rm -f" $$list; \
rm -f $$list || exit $$?; \
test -n "$(EXEEXT)" || exit 0; \
list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
echo " rm -f" $$list; \
rm -f $$list
accum$(EXEEXT): $(accum_OBJECTS) $(accum_DEPENDENCIES) $(EXTRA_accum_DEPENDENCIES)
@rm -f accum$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(accum_OBJECTS) $(accum_LDADD) $(LIBS)
app_ref$(EXEEXT): $(app_ref_OBJECTS) $(app_ref_DEPENDENCIES) $(EXTRA_app_ref_DEPENDENCIES)
@rm -f app_ref$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(app_ref_OBJECTS) $(app_ref_LDADD) $(LIBS)
big$(EXEEXT): $(big_OBJECTS) $(big_DEPENDENCIES) $(EXTRA_big_DEPENDENCIES)
@rm -f big$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(big_OBJECTS) $(big_LDADD) $(LIBS)
bittests$(EXEEXT): $(bittests_OBJECTS) $(bittests_DEPENDENCIES) $(EXTRA_bittests_DEPENDENCIES)
@rm -f bittests$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(bittests_OBJECTS) $(bittests_LDADD) $(LIBS)
btree2$(EXEEXT): $(btree2_OBJECTS) $(btree2_DEPENDENCIES) $(EXTRA_btree2_DEPENDENCIES)
@rm -f btree2$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(btree2_OBJECTS) $(btree2_LDADD) $(LIBS)
cache$(EXEEXT): $(cache_OBJECTS) $(cache_DEPENDENCIES) $(EXTRA_cache_DEPENDENCIES)
@rm -f cache$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(cache_OBJECTS) $(cache_LDADD) $(LIBS)
cache_api$(EXEEXT): $(cache_api_OBJECTS) $(cache_api_DEPENDENCIES) $(EXTRA_cache_api_DEPENDENCIES)
@rm -f cache_api$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(cache_api_OBJECTS) $(cache_api_LDADD) $(LIBS)
cache_tagging$(EXEEXT): $(cache_tagging_OBJECTS) $(cache_tagging_DEPENDENCIES) $(EXTRA_cache_tagging_DEPENDENCIES)
@rm -f cache_tagging$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(cache_tagging_OBJECTS) $(cache_tagging_LDADD) $(LIBS)
cmpd_dset$(EXEEXT): $(cmpd_dset_OBJECTS) $(cmpd_dset_DEPENDENCIES) $(EXTRA_cmpd_dset_DEPENDENCIES)
@rm -f cmpd_dset$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(cmpd_dset_OBJECTS) $(cmpd_dset_LDADD) $(LIBS)
cross_read$(EXEEXT): $(cross_read_OBJECTS) $(cross_read_DEPENDENCIES) $(EXTRA_cross_read_DEPENDENCIES)
@rm -f cross_read$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(cross_read_OBJECTS) $(cross_read_LDADD) $(LIBS)
dangle$(EXEEXT): $(dangle_OBJECTS) $(dangle_DEPENDENCIES) $(EXTRA_dangle_DEPENDENCIES)
@rm -f dangle$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(dangle_OBJECTS) $(dangle_LDADD) $(LIBS)
dsets$(EXEEXT): $(dsets_OBJECTS) $(dsets_DEPENDENCIES) $(EXTRA_dsets_DEPENDENCIES)
@rm -f dsets$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(dsets_OBJECTS) $(dsets_LDADD) $(LIBS)
dt_arith$(EXEEXT): $(dt_arith_OBJECTS) $(dt_arith_DEPENDENCIES) $(EXTRA_dt_arith_DEPENDENCIES)
@rm -f dt_arith$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(dt_arith_OBJECTS) $(dt_arith_LDADD) $(LIBS)
dtransform$(EXEEXT): $(dtransform_OBJECTS) $(dtransform_DEPENDENCIES) $(EXTRA_dtransform_DEPENDENCIES)
@rm -f dtransform$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(dtransform_OBJECTS) $(dtransform_LDADD) $(LIBS)
dtypes$(EXEEXT): $(dtypes_OBJECTS) $(dtypes_DEPENDENCIES) $(EXTRA_dtypes_DEPENDENCIES)
@rm -f dtypes$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(dtypes_OBJECTS) $(dtypes_LDADD) $(LIBS)
earray$(EXEEXT): $(earray_OBJECTS) $(earray_DEPENDENCIES) $(EXTRA_earray_DEPENDENCIES)
@rm -f earray$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(earray_OBJECTS) $(earray_LDADD) $(LIBS)
efc$(EXEEXT): $(efc_OBJECTS) $(efc_DEPENDENCIES) $(EXTRA_efc_DEPENDENCIES)
@rm -f efc$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(efc_OBJECTS) $(efc_LDADD) $(LIBS)
enc_dec_plist$(EXEEXT): $(enc_dec_plist_OBJECTS) $(enc_dec_plist_DEPENDENCIES) $(EXTRA_enc_dec_plist_DEPENDENCIES)
@rm -f enc_dec_plist$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(enc_dec_plist_OBJECTS) $(enc_dec_plist_LDADD) $(LIBS)
enc_dec_plist_with_endianess$(EXEEXT): $(enc_dec_plist_with_endianess_OBJECTS) $(enc_dec_plist_with_endianess_DEPENDENCIES) $(EXTRA_enc_dec_plist_with_endianess_DEPENDENCIES)
@rm -f enc_dec_plist_with_endianess$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(enc_dec_plist_with_endianess_OBJECTS) $(enc_dec_plist_with_endianess_LDADD) $(LIBS)
enum$(EXEEXT): $(enum_OBJECTS) $(enum_DEPENDENCIES) $(EXTRA_enum_DEPENDENCIES)
@rm -f enum$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(enum_OBJECTS) $(enum_LDADD) $(LIBS)
err_compat$(EXEEXT): $(err_compat_OBJECTS) $(err_compat_DEPENDENCIES) $(EXTRA_err_compat_DEPENDENCIES)
@rm -f err_compat$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(err_compat_OBJECTS) $(err_compat_LDADD) $(LIBS)
error_test$(EXEEXT): $(error_test_OBJECTS) $(error_test_DEPENDENCIES) $(EXTRA_error_test_DEPENDENCIES)
@rm -f error_test$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(error_test_OBJECTS) $(error_test_LDADD) $(LIBS)
extend$(EXEEXT): $(extend_OBJECTS) $(extend_DEPENDENCIES) $(EXTRA_extend_DEPENDENCIES)
@rm -f extend$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(extend_OBJECTS) $(extend_LDADD) $(LIBS)
external$(EXEEXT): $(external_OBJECTS) $(external_DEPENDENCIES) $(EXTRA_external_DEPENDENCIES)
@rm -f external$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(external_OBJECTS) $(external_LDADD) $(LIBS)
farray$(EXEEXT): $(farray_OBJECTS) $(farray_DEPENDENCIES) $(EXTRA_farray_DEPENDENCIES)
@rm -f farray$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(farray_OBJECTS) $(farray_LDADD) $(LIBS)
fheap$(EXEEXT): $(fheap_OBJECTS) $(fheap_DEPENDENCIES) $(EXTRA_fheap_DEPENDENCIES)
@rm -f fheap$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(fheap_OBJECTS) $(fheap_LDADD) $(LIBS)
file_image$(EXEEXT): $(file_image_OBJECTS) $(file_image_DEPENDENCIES) $(EXTRA_file_image_DEPENDENCIES)
@rm -f file_image$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(file_image_OBJECTS) $(file_image_LDADD) $(LIBS)
fillval$(EXEEXT): $(fillval_OBJECTS) $(fillval_DEPENDENCIES) $(EXTRA_fillval_DEPENDENCIES)
@rm -f fillval$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(fillval_OBJECTS) $(fillval_LDADD) $(LIBS)
filter_fail$(EXEEXT): $(filter_fail_OBJECTS) $(filter_fail_DEPENDENCIES) $(EXTRA_filter_fail_DEPENDENCIES)
@rm -f filter_fail$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(filter_fail_OBJECTS) $(filter_fail_LDADD) $(LIBS)
flush1$(EXEEXT): $(flush1_OBJECTS) $(flush1_DEPENDENCIES) $(EXTRA_flush1_DEPENDENCIES)
@rm -f flush1$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(flush1_OBJECTS) $(flush1_LDADD) $(LIBS)
flush2$(EXEEXT): $(flush2_OBJECTS) $(flush2_DEPENDENCIES) $(EXTRA_flush2_DEPENDENCIES)
@rm -f flush2$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(flush2_OBJECTS) $(flush2_LDADD) $(LIBS)
freespace$(EXEEXT): $(freespace_OBJECTS) $(freespace_DEPENDENCIES) $(EXTRA_freespace_DEPENDENCIES)
@rm -f freespace$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(freespace_OBJECTS) $(freespace_LDADD) $(LIBS)
gen_bad_ohdr$(EXEEXT): $(gen_bad_ohdr_OBJECTS) $(gen_bad_ohdr_DEPENDENCIES) $(EXTRA_gen_bad_ohdr_DEPENDENCIES)
@rm -f gen_bad_ohdr$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_bad_ohdr_OBJECTS) $(gen_bad_ohdr_LDADD) $(LIBS)
gen_bogus$(EXEEXT): $(gen_bogus_OBJECTS) $(gen_bogus_DEPENDENCIES) $(EXTRA_gen_bogus_DEPENDENCIES)
@rm -f gen_bogus$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_bogus_OBJECTS) $(gen_bogus_LDADD) $(LIBS)
gen_cross$(EXEEXT): $(gen_cross_OBJECTS) $(gen_cross_DEPENDENCIES) $(EXTRA_gen_cross_DEPENDENCIES)
@rm -f gen_cross$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_cross_OBJECTS) $(gen_cross_LDADD) $(LIBS)
gen_deflate$(EXEEXT): $(gen_deflate_OBJECTS) $(gen_deflate_DEPENDENCIES) $(EXTRA_gen_deflate_DEPENDENCIES)
@rm -f gen_deflate$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_deflate_OBJECTS) $(gen_deflate_LDADD) $(LIBS)
gen_file_image$(EXEEXT): $(gen_file_image_OBJECTS) $(gen_file_image_DEPENDENCIES) $(EXTRA_gen_file_image_DEPENDENCIES)
@rm -f gen_file_image$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_file_image_OBJECTS) $(gen_file_image_LDADD) $(LIBS)
gen_filespace$(EXEEXT): $(gen_filespace_OBJECTS) $(gen_filespace_DEPENDENCIES) $(EXTRA_gen_filespace_DEPENDENCIES)
@rm -f gen_filespace$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_filespace_OBJECTS) $(gen_filespace_LDADD) $(LIBS)
gen_filters$(EXEEXT): $(gen_filters_OBJECTS) $(gen_filters_DEPENDENCIES) $(EXTRA_gen_filters_DEPENDENCIES)
@rm -f gen_filters$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_filters_OBJECTS) $(gen_filters_LDADD) $(LIBS)
gen_new_array$(EXEEXT): $(gen_new_array_OBJECTS) $(gen_new_array_DEPENDENCIES) $(EXTRA_gen_new_array_DEPENDENCIES)
@rm -f gen_new_array$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_new_array_OBJECTS) $(gen_new_array_LDADD) $(LIBS)
gen_new_fill$(EXEEXT): $(gen_new_fill_OBJECTS) $(gen_new_fill_DEPENDENCIES) $(EXTRA_gen_new_fill_DEPENDENCIES)
@rm -f gen_new_fill$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_new_fill_OBJECTS) $(gen_new_fill_LDADD) $(LIBS)
gen_new_group$(EXEEXT): $(gen_new_group_OBJECTS) $(gen_new_group_DEPENDENCIES) $(EXTRA_gen_new_group_DEPENDENCIES)
2005-11-15 10:55:39 +08:00
@rm -f gen_new_group$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_new_group_OBJECTS) $(gen_new_group_LDADD) $(LIBS)
gen_new_mtime$(EXEEXT): $(gen_new_mtime_OBJECTS) $(gen_new_mtime_DEPENDENCIES) $(EXTRA_gen_new_mtime_DEPENDENCIES)
@rm -f gen_new_mtime$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_new_mtime_OBJECTS) $(gen_new_mtime_LDADD) $(LIBS)
gen_new_super$(EXEEXT): $(gen_new_super_OBJECTS) $(gen_new_super_DEPENDENCIES) $(EXTRA_gen_new_super_DEPENDENCIES)
@rm -f gen_new_super$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_new_super_OBJECTS) $(gen_new_super_LDADD) $(LIBS)
gen_noencoder$(EXEEXT): $(gen_noencoder_OBJECTS) $(gen_noencoder_DEPENDENCIES) $(EXTRA_gen_noencoder_DEPENDENCIES)
@rm -f gen_noencoder$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_noencoder_OBJECTS) $(gen_noencoder_LDADD) $(LIBS)
gen_nullspace$(EXEEXT): $(gen_nullspace_OBJECTS) $(gen_nullspace_DEPENDENCIES) $(EXTRA_gen_nullspace_DEPENDENCIES)
@rm -f gen_nullspace$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_nullspace_OBJECTS) $(gen_nullspace_LDADD) $(LIBS)
gen_plist$(EXEEXT): $(gen_plist_OBJECTS) $(gen_plist_DEPENDENCIES) $(EXTRA_gen_plist_DEPENDENCIES)
@rm -f gen_plist$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_plist_OBJECTS) $(gen_plist_LDADD) $(LIBS)
gen_sizes_lheap$(EXEEXT): $(gen_sizes_lheap_OBJECTS) $(gen_sizes_lheap_DEPENDENCIES) $(EXTRA_gen_sizes_lheap_DEPENDENCIES)
@rm -f gen_sizes_lheap$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_sizes_lheap_OBJECTS) $(gen_sizes_lheap_LDADD) $(LIBS)
gen_specmetaread$(EXEEXT): $(gen_specmetaread_OBJECTS) $(gen_specmetaread_DEPENDENCIES) $(EXTRA_gen_specmetaread_DEPENDENCIES)
@rm -f gen_specmetaread$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_specmetaread_OBJECTS) $(gen_specmetaread_LDADD) $(LIBS)
gen_udlinks$(EXEEXT): $(gen_udlinks_OBJECTS) $(gen_udlinks_DEPENDENCIES) $(EXTRA_gen_udlinks_DEPENDENCIES)
@rm -f gen_udlinks$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gen_udlinks_OBJECTS) $(gen_udlinks_LDADD) $(LIBS)
getname$(EXEEXT): $(getname_OBJECTS) $(getname_DEPENDENCIES) $(EXTRA_getname_DEPENDENCIES)
@rm -f getname$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(getname_OBJECTS) $(getname_LDADD) $(LIBS)
gheap$(EXEEXT): $(gheap_OBJECTS) $(gheap_DEPENDENCIES) $(EXTRA_gheap_DEPENDENCIES)
@rm -f gheap$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(gheap_OBJECTS) $(gheap_LDADD) $(LIBS)
hyperslab$(EXEEXT): $(hyperslab_OBJECTS) $(hyperslab_DEPENDENCIES) $(EXTRA_hyperslab_DEPENDENCIES)
@rm -f hyperslab$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(hyperslab_OBJECTS) $(hyperslab_LDADD) $(LIBS)
istore$(EXEEXT): $(istore_OBJECTS) $(istore_DEPENDENCIES) $(EXTRA_istore_DEPENDENCIES)
@rm -f istore$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(istore_OBJECTS) $(istore_LDADD) $(LIBS)
lheap$(EXEEXT): $(lheap_OBJECTS) $(lheap_DEPENDENCIES) $(EXTRA_lheap_DEPENDENCIES)
@rm -f lheap$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(lheap_OBJECTS) $(lheap_LDADD) $(LIBS)
links$(EXEEXT): $(links_OBJECTS) $(links_DEPENDENCIES) $(EXTRA_links_DEPENDENCIES)
@rm -f links$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(links_OBJECTS) $(links_LDADD) $(LIBS)
links_env$(EXEEXT): $(links_env_OBJECTS) $(links_env_DEPENDENCIES) $(EXTRA_links_env_DEPENDENCIES)
@rm -f links_env$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(links_env_OBJECTS) $(links_env_LDADD) $(LIBS)
mf$(EXEEXT): $(mf_OBJECTS) $(mf_DEPENDENCIES) $(EXTRA_mf_DEPENDENCIES)
@rm -f mf$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(mf_OBJECTS) $(mf_LDADD) $(LIBS)
mount$(EXEEXT): $(mount_OBJECTS) $(mount_DEPENDENCIES) $(EXTRA_mount_DEPENDENCIES)
@rm -f mount$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(mount_OBJECTS) $(mount_LDADD) $(LIBS)
mtime$(EXEEXT): $(mtime_OBJECTS) $(mtime_DEPENDENCIES) $(EXTRA_mtime_DEPENDENCIES)
@rm -f mtime$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(mtime_OBJECTS) $(mtime_LDADD) $(LIBS)
ntypes$(EXEEXT): $(ntypes_OBJECTS) $(ntypes_DEPENDENCIES) $(EXTRA_ntypes_DEPENDENCIES)
@rm -f ntypes$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(ntypes_OBJECTS) $(ntypes_LDADD) $(LIBS)
objcopy$(EXEEXT): $(objcopy_OBJECTS) $(objcopy_DEPENDENCIES) $(EXTRA_objcopy_DEPENDENCIES)
@rm -f objcopy$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(objcopy_OBJECTS) $(objcopy_LDADD) $(LIBS)
ohdr$(EXEEXT): $(ohdr_OBJECTS) $(ohdr_DEPENDENCIES) $(EXTRA_ohdr_DEPENDENCIES)
@rm -f ohdr$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(ohdr_OBJECTS) $(ohdr_LDADD) $(LIBS)
plugin$(EXEEXT): $(plugin_OBJECTS) $(plugin_DEPENDENCIES) $(EXTRA_plugin_DEPENDENCIES)
@rm -f plugin$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(plugin_OBJECTS) $(plugin_LDADD) $(LIBS)
pool$(EXEEXT): $(pool_OBJECTS) $(pool_DEPENDENCIES) $(EXTRA_pool_DEPENDENCIES)
@rm -f pool$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(pool_OBJECTS) $(pool_LDADD) $(LIBS)
reserved$(EXEEXT): $(reserved_OBJECTS) $(reserved_DEPENDENCIES) $(EXTRA_reserved_DEPENDENCIES)
@rm -f reserved$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(reserved_OBJECTS) $(reserved_LDADD) $(LIBS)
set_extent$(EXEEXT): $(set_extent_OBJECTS) $(set_extent_DEPENDENCIES) $(EXTRA_set_extent_DEPENDENCIES)
@rm -f set_extent$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(set_extent_OBJECTS) $(set_extent_LDADD) $(LIBS)
space_overflow$(EXEEXT): $(space_overflow_OBJECTS) $(space_overflow_DEPENDENCIES) $(EXTRA_space_overflow_DEPENDENCIES)
@rm -f space_overflow$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(space_overflow_OBJECTS) $(space_overflow_LDADD) $(LIBS)
stab$(EXEEXT): $(stab_OBJECTS) $(stab_DEPENDENCIES) $(EXTRA_stab_DEPENDENCIES)
@rm -f stab$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(stab_OBJECTS) $(stab_LDADD) $(LIBS)
tcheck_version$(EXEEXT): $(tcheck_version_OBJECTS) $(tcheck_version_DEPENDENCIES) $(EXTRA_tcheck_version_DEPENDENCIES)
@rm -f tcheck_version$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(tcheck_version_OBJECTS) $(tcheck_version_LDADD) $(LIBS)
testhdf5$(EXEEXT): $(testhdf5_OBJECTS) $(testhdf5_DEPENDENCIES) $(EXTRA_testhdf5_DEPENDENCIES)
@rm -f testhdf5$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(testhdf5_OBJECTS) $(testhdf5_LDADD) $(LIBS)
testmeta$(EXEEXT): $(testmeta_OBJECTS) $(testmeta_DEPENDENCIES) $(EXTRA_testmeta_DEPENDENCIES)
@rm -f testmeta$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(testmeta_OBJECTS) $(testmeta_LDADD) $(LIBS)
ttsafe$(EXEEXT): $(ttsafe_OBJECTS) $(ttsafe_DEPENDENCIES) $(EXTRA_ttsafe_DEPENDENCIES)
@rm -f ttsafe$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(ttsafe_OBJECTS) $(ttsafe_LDADD) $(LIBS)
unlink$(EXEEXT): $(unlink_OBJECTS) $(unlink_DEPENDENCIES) $(EXTRA_unlink_DEPENDENCIES)
@rm -f unlink$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(unlink_OBJECTS) $(unlink_LDADD) $(LIBS)
unregister$(EXEEXT): $(unregister_OBJECTS) $(unregister_DEPENDENCIES) $(EXTRA_unregister_DEPENDENCIES)
@rm -f unregister$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(unregister_OBJECTS) $(unregister_LDADD) $(LIBS)
vfd$(EXEEXT): $(vfd_OBJECTS) $(vfd_DEPENDENCIES) $(EXTRA_vfd_DEPENDENCIES)
@rm -f vfd$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(vfd_OBJECTS) $(vfd_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/accum.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/app_ref.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/big.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bittests.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/btree2.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cache.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cache_api.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cache_common.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cache_tagging.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cmpd_dset.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cross_read.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dangle.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dsets.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dt_arith.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dtransform.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dtypes.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dynlib1.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dynlib2.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dynlib3.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earray.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/efc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/enc_dec_plist.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/enc_dec_plist_with_endianess.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/enum.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/err_compat.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error_test.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/extend.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/external.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/farray.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fheap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file_image.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fillval.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filter_fail.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flush1.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flush2.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/freespace.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_bad_ohdr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_bogus.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_cross.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_deflate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_file_image.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_filespace.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_filters.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_new_array.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_new_fill.Po@am__quote@
2005-11-15 10:55:39 +08:00
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_new_group.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_new_mtime.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_new_super.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_noencoder.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_nullspace.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_plist.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_sizes_lheap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_specmetaread.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_udlinks.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getname.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gheap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5test.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hyperslab.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/istore.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lheap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/links.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/links_env.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mount.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mtime.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ntypes.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/objcopy.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ohdr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/plugin.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pool.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reserved.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/set_extent.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/space_overflow.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stab.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tarray.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tattr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tcheck_version.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tchecksum.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tconfig.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tcoords.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testframe.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testhdf5.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testmeta.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tfile.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tgenprop.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/th5o.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/th5s.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/theap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tid.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/titerate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tmeta.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tmisc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trefer.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trefstr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tselect.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tskiplist.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tsohm.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttime.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_acreate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_cancel.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_dcreate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_error.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttst.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tunicode.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tvlstr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tvltypes.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unlink.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unregister.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vfd.Po@am__quote@
2003-09-25 03:26:50 +08:00
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
[svn-r129] Changes since 19970916 ---------------------- ./config/depend.in Fixed backslashes in sed script because the H5Gnode.c dependency info was disappearing. You'll have to rerun config.status to rebuild the Makefiles unless you use gnu make. ./config/conclude.in Also removes emacs backup files, TAGS, and svf backup files. ./config/linux Grouped gcc flags and added provisions for debugging vs. production. ./html/H5.format.html Updated messages 0x0008, 0x0009, and 0x000A. ./html/storage.html Documentation describing storage schemes. ./src/Makefile.in ./test/Makefile.in New source files. ./src/H5A.c ./src/H5Apublic.h ./src/H5C.c Changed VOIDP to void* in a couple places. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Bprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h ./src/H5H.c ./src/H5O.c Removed `const' from some variables because H5G_node_found() wanted to modify it's udata argument. Removing const there caused it to cascade to these other locations. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5H.c ./src/H5O.c Added an extra argument to H5AC_find_f() and H5AC_protect(). This arg gets passed to the load() method. Also added an extra argument to the H5AC_find() macro. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra argument passed to the sizeof_rkey() method. ./src/H5Fprivate.c ./src/H5Fistore.c (new) Added indexed I/O operations. ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h Beginning to add H5G_open/close and related bug fixes. ./src/H5Oprivate.h ./src/H5Oistore.c (new) Added the H5O_ISTORE messsage (0x0008) for indexed storage of objects. ./src/H5private.h Added extra braces around both sides of the FUNC_ENTER() and FUNC_LEAVE() macros so FUNC_ENTER() can appear before declarations or after executable statements the second case is used by H5G_namei() to initialize output arguments to sane values before FUNC_ENTER() might return failure. int f () { int decl1; printf ("This happens before FUNC_ENTER()\n"); FUNC_ENTER (...); int another_declaration; ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra arguments for key encoding and decoding. ./src/H5E.c ./src/H5Epublic.h ./src/H5Fistore.c ./src/H5Oistore.c ./src/H5Oprivate.h Indexed, chunked, sparse storage (not ready for general consumption yet). ./src/H5V.c (new) ./src/H5Vprivate.h (new) ./test/hyperslab.c (new) Vector, array, and hyperslab functions. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Fistore.c ./src/H5Gnode.c ./src/H5V.c ./src/H5Vprivate.h ./test/hyperslab.c Added functionality for indexed storage. ./src/H5F.c Fixed problems with seek optimizing. Recommend we disable it until we can implement it in the file/address class since all of HDF5 must be aware of it. ./src/H5O.c Fixed comeent speling erorr :-) ./MANIFEST Added new files. ./config/conclude.in Added the word `Testing' to the test cases. So if a test program is called hyperslab then the make output will contain the line `Testing hyperslab'. ./config/linux The default file I/O library is Posix section 2 on my linux machine so I can do some I/O performance testing. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Added ability to set size of indexed-storage B-tree. ./src/H5D.c ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gpublic.h ./src/H5Gshad.c ./src/H5Gstab.c ./test/stab.c Changed `directory' to `group' in numerous places. ./src/H5private.h The FILELIB constant can be set on the compile command-line. ./src/istore.c NEW Tests for indexed storage.
1997-10-21 07:14:35 +08:00
mostlyclean-libtool:
-rm -f *.lo
[svn-r949] Changes since 19981124 ---------------------- ./src/H5T.c Fixed a typo in the registration of the `unsigned char' to `unsigned long long' type conversion that caused it to not be registered, falling back to software whenever that conversion path was taken. ./MANIFEST ./test/Makefile.in ./test/testhdf5.c ./test/testhdf5.h ./test/theap.c [REMOVED] ./test/lheap.c [NEW] ./test/tohdr.c [REMOVED] ./test/ohdr.c [NEW] ./test/tstab.c [REMOVED] ./test/stab.c [NEW] Removed the `t' from the front of these names and made each test a stand-alone program following the format of most of the other tests. ./test/big.c Uses libh5test.a but always sets the low-level driver to 1GB file family. The `#if' near the top to set the data space to 8GB has been simplified now that `long_long' is always defined and the error message is improved when `long_long' isn't wide enough. Cleanup code was added to the error handling. ./test/gheap.c ./test/istore.c Uses libh5test.a. Added error cleanup code. ./test/dtypes.c ./test/h5test.c Added 68 new tests that check hardware and software conversions between `long long' and `unsigned long long' and the other integer types. The tests only run on machines where sizeof(long_long)!=sizeof(long). We test a total of 180 different integer conversions, half in hardware and half in software. Cut down the number of times each test is run from 5 to 1 so it doesn't take so long. If you want to run more times there's a constant that can be changed at the top of the file. ./test/extend.c Removed unused variable. ./test/h5test.c ./test/h5test.h ./test/external.c ./test/fillval.c The h5_cleanup() returns true/false so it can be used in an `if' statement to clean up additional files. ./doc/html/Environment.html Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions. ./src/H5P.c Changed the trace type for the second argument from `Iu' to `x' since it's an output parameter. ./INSTALL Added a warning that the GNU zlib that comes with the latest version of HDF4 is too old to use with HDF5 and must be renamed so configure doesn't see it when `--enable-hdf4' is used.
1998-11-25 22:58:22 +08:00
clean-libtool:
-rm -rf .libs _libs
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
1997-08-16 00:54:08 +08:00
# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
rm -f $< $@
$(MAKE) $(AM_MAKEFLAGS) $<
# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
@:
$(TEST_SUITE_LOG): $(TEST_LOGS)
@$(am__set_TESTS_bases); \
am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
redo_bases=`for i in $$bases; do \
am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
done`; \
if test -n "$$redo_bases"; then \
redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
if $(am__make_dryrun); then :; else \
rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
fi; \
fi; \
if test -n "$$am__remaking_logs"; then \
echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
"recursion detected" >&2; \
else \
am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
fi; \
if $(am__make_dryrun); then :; else \
st=0; \
errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
for i in $$redo_bases; do \
test -f $$i.trs && test -r $$i.trs \
|| { echo "$$errmsg $$i.trs" >&2; st=1; }; \
test -f $$i.log && test -r $$i.log \
|| { echo "$$errmsg $$i.log" >&2; st=1; }; \
done; \
test $$st -eq 0 || exit 1; \
fi
@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
ws='[ ]'; \
results=`for b in $$bases; do echo $$b.trs; done`; \
test -n "$$results" || results=/dev/null; \
all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
if test `expr $$fail + $$xpass + $$error` -eq 0; then \
success=true; \
else \
success=false; \
fi; \
br='==================='; br=$$br$$br$$br$$br; \
result_count () \
{ \
if test x"$$1" = x"--maybe-color"; then \
maybe_colorize=yes; \
elif test x"$$1" = x"--no-color"; then \
maybe_colorize=no; \
else \
echo "$@: invalid 'result_count' usage" >&2; exit 4; \
fi; \
shift; \
desc=$$1 count=$$2; \
if test $$maybe_colorize = yes && test $$count -gt 0; then \
color_start=$$3 color_end=$$std; \
else \
color_start= color_end=; \
fi; \
echo "$${color_start}# $$desc $$count$${color_end}"; \
}; \
create_testsuite_report () \
{ \
result_count $$1 "TOTAL:" $$all "$$brg"; \
result_count $$1 "PASS: " $$pass "$$grn"; \
result_count $$1 "SKIP: " $$skip "$$blu"; \
result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
result_count $$1 "FAIL: " $$fail "$$red"; \
result_count $$1 "XPASS:" $$xpass "$$red"; \
result_count $$1 "ERROR:" $$error "$$mgn"; \
}; \
{ \
echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
$(am__rst_title); \
create_testsuite_report --no-color; \
echo; \
echo ".. contents:: :depth: 2"; \
echo; \
for b in $$bases; do echo $$b; done \
| $(am__create_global_log); \
} >$(TEST_SUITE_LOG).tmp || exit 1; \
mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
if $$success; then \
col="$$grn"; \
else \
col="$$red"; \
test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
fi; \
echo "$${col}$$br$${std}"; \
echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
echo "$${col}$$br$${std}"; \
create_testsuite_report --maybe-color; \
echo "$$col$$br$$std"; \
if $$success; then :; else \
echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
if test -n "$(PACKAGE_BUGREPORT)"; then \
echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
fi; \
echo "$$col$$br$$std"; \
fi; \
$$success || exit 1
recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
@set +e; $(am__set_TESTS_bases); \
bases=`for i in $$bases; do echo $$i; done \
| $(am__list_recheck_tests)` || exit 1; \
log_list=`for i in $$bases; do echo $$i.log; done`; \
log_list=`echo $$log_list`; \
$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
am__force_recheck=am--force-recheck \
TEST_LOGS="$$log_list"; \
exit $$?
testhdf5.log: testhdf5$(EXEEXT)
@p='testhdf5$(EXEEXT)'; \
b='testhdf5'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
lheap.log: lheap$(EXEEXT)
@p='lheap$(EXEEXT)'; \
b='lheap'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
ohdr.log: ohdr$(EXEEXT)
@p='ohdr$(EXEEXT)'; \
b='ohdr'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
stab.log: stab$(EXEEXT)
@p='stab$(EXEEXT)'; \
b='stab'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
gheap.log: gheap$(EXEEXT)
@p='gheap$(EXEEXT)'; \
b='gheap'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
cache.log: cache$(EXEEXT)
@p='cache$(EXEEXT)'; \
b='cache'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
cache_api.log: cache_api$(EXEEXT)
@p='cache_api$(EXEEXT)'; \
b='cache_api'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
cache_tagging.log: cache_tagging$(EXEEXT)
@p='cache_tagging$(EXEEXT)'; \
b='cache_tagging'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
pool.log: pool$(EXEEXT)
@p='pool$(EXEEXT)'; \
b='pool'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
accum.log: accum$(EXEEXT)
@p='accum$(EXEEXT)'; \
b='accum'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
hyperslab.log: hyperslab$(EXEEXT)
@p='hyperslab$(EXEEXT)'; \
b='hyperslab'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
istore.log: istore$(EXEEXT)
@p='istore$(EXEEXT)'; \
b='istore'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
bittests.log: bittests$(EXEEXT)
@p='bittests$(EXEEXT)'; \
b='bittests'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
dt_arith.log: dt_arith$(EXEEXT)
@p='dt_arith$(EXEEXT)'; \
b='dt_arith'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
dtypes.log: dtypes$(EXEEXT)
@p='dtypes$(EXEEXT)'; \
b='dtypes'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
dsets.log: dsets$(EXEEXT)
@p='dsets$(EXEEXT)'; \
b='dsets'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
cmpd_dset.log: cmpd_dset$(EXEEXT)
@p='cmpd_dset$(EXEEXT)'; \
b='cmpd_dset'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
filter_fail.log: filter_fail$(EXEEXT)
@p='filter_fail$(EXEEXT)'; \
b='filter_fail'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
extend.log: extend$(EXEEXT)
@p='extend$(EXEEXT)'; \
b='extend'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
external.log: external$(EXEEXT)
@p='external$(EXEEXT)'; \
b='external'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
efc.log: efc$(EXEEXT)
@p='efc$(EXEEXT)'; \
b='efc'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
objcopy.log: objcopy$(EXEEXT)
@p='objcopy$(EXEEXT)'; \
b='objcopy'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
links.log: links$(EXEEXT)
@p='links$(EXEEXT)'; \
b='links'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
unlink.log: unlink$(EXEEXT)
@p='unlink$(EXEEXT)'; \
b='unlink'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
big.log: big$(EXEEXT)
@p='big$(EXEEXT)'; \
b='big'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
mtime.log: mtime$(EXEEXT)
@p='mtime$(EXEEXT)'; \
b='mtime'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
fillval.log: fillval$(EXEEXT)
@p='fillval$(EXEEXT)'; \
b='fillval'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
mount.log: mount$(EXEEXT)
@p='mount$(EXEEXT)'; \
b='mount'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
flush1.log: flush1$(EXEEXT)
@p='flush1$(EXEEXT)'; \
b='flush1'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
flush2.log: flush2$(EXEEXT)
@p='flush2$(EXEEXT)'; \
b='flush2'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
app_ref.log: app_ref$(EXEEXT)
@p='app_ref$(EXEEXT)'; \
b='app_ref'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
enum.log: enum$(EXEEXT)
@p='enum$(EXEEXT)'; \
b='enum'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
set_extent.log: set_extent$(EXEEXT)
@p='set_extent$(EXEEXT)'; \
b='set_extent'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
ttsafe.log: ttsafe$(EXEEXT)
@p='ttsafe$(EXEEXT)'; \
b='ttsafe'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
enc_dec_plist.log: enc_dec_plist$(EXEEXT)
@p='enc_dec_plist$(EXEEXT)'; \
b='enc_dec_plist'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
enc_dec_plist_with_endianess.log: enc_dec_plist_with_endianess$(EXEEXT)
@p='enc_dec_plist_with_endianess$(EXEEXT)'; \
b='enc_dec_plist_with_endianess'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
getname.log: getname$(EXEEXT)
@p='getname$(EXEEXT)'; \
b='getname'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
vfd.log: vfd$(EXEEXT)
@p='vfd$(EXEEXT)'; \
b='vfd'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
ntypes.log: ntypes$(EXEEXT)
@p='ntypes$(EXEEXT)'; \
b='ntypes'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
dangle.log: dangle$(EXEEXT)
@p='dangle$(EXEEXT)'; \
b='dangle'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
dtransform.log: dtransform$(EXEEXT)
@p='dtransform$(EXEEXT)'; \
b='dtransform'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
reserved.log: reserved$(EXEEXT)
@p='reserved$(EXEEXT)'; \
b='reserved'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
cross_read.log: cross_read$(EXEEXT)
@p='cross_read$(EXEEXT)'; \
b='cross_read'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
freespace.log: freespace$(EXEEXT)
@p='freespace$(EXEEXT)'; \
b='freespace'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
mf.log: mf$(EXEEXT)
@p='mf$(EXEEXT)'; \
b='mf'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
farray.log: farray$(EXEEXT)
@p='farray$(EXEEXT)'; \
b='farray'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
earray.log: earray$(EXEEXT)
@p='earray$(EXEEXT)'; \
b='earray'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
btree2.log: btree2$(EXEEXT)
@p='btree2$(EXEEXT)'; \
b='btree2'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
fheap.log: fheap$(EXEEXT)
@p='fheap$(EXEEXT)'; \
b='fheap'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
file_image.log: file_image$(EXEEXT)
@p='file_image$(EXEEXT)'; \
b='file_image'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
unregister.log: unregister$(EXEEXT)
@p='unregister$(EXEEXT)'; \
b='unregister'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
.sh.log:
@p='$<'; \
$(am__set_b); \
$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
@am__EXEEXT_TRUE@ @p='$<'; \
@am__EXEEXT_TRUE@ $(am__set_b); \
@am__EXEEXT_TRUE@ $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT)
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local
installdirs:
for dir in "$(DESTDIR)$(libdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
[svn-r303] Changes since 19980228 ---------------------- ./html/Dataspaces.html ./html/Errors.html ./html/Files.html ./html/H5.api.html ./html/review1.html ./src/H5private.h ./src/H5public.h ./test/dsets.c ./test/dtypes.c Removed all the types like `int32' and `intn' into private headers since they violate the naming scheme and pollute application name space. Besides, our test files only use them in a handful of places and it's probably useless to export them to the app. The app is always written in terms of standard numeric types or its own numeric types and probably never in terms of HDF5 numeric types. If it were, then the user would have to copy from their type to hdf5 type for almost every hdf5 API function call! Same goes for return values. I also removed SUCCEED/FAIL from the API since apps should be checking against zero anyway. if (FAIL==(space=H5Screate_simple(...))) /*wrong*/ if ((space=H5Fcreate_simple(...)<0)) /*right*/ ./src/H5.c Changed arguments of H5version() from `uintn' to `unsigned'. ./src/H5Tpublic.h ./src/H5T.c Changed return type of H5Tget_nmembers() from `intn' to `int' ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h Changed `H5Asearch_func_t' to `H5A_search_func_t' and moved its definition from the public to the private header file. ./html/H5.format.html Documented changes made to the external file list (H5O_EFL) message. ./src/H5D.c ./src/H5Dprivate.h ./src/H5E.c ./src/H5Epublic.h ./src/H5O.c ./src/H5Oefl.c ./src/H5Oprivate.h ./src/H5P.c ./src/H5Ppublic.h Added partial support for external raw data files. HDF5 can now describe external raw data files by listing the file names, offsets, and size for a dataset. However, we will restrict a dataset to be stored "contiguously" when the external file list is viewed as a single address space. The current implementation is unable to read/write to external files--that will come later this week as will documentation. For now, take a look at ./test/external.c, particularly the calls to H5Pset_external(). ./test/Makefile.in ./test/external.c [NEW] ./MANIFEST Added tests for external storage. Note: the read test is supposed to fail at this point since reading external datasets is not implemented yet. There is no write test. ./src/H5S.c ./src/H5Sprivate.h ./src/H5Ssimp.c Added H5S_get_npoints_max() to return the maximum possible number of data points in a data space. Added an extra argument to H5S_get_dims() which returns the maximum dims. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5M.c [DEPRICATED] ./src/H5Mpublic.h [DEPRICATED] Changed `template' to `property list' in lots of places. ./src/H5Osdspace.c Removed an extra `\n' from a print statement. ./src/H5S_public.h Changed H5S_UNLIMITED to the maximum size_t value. ./test/extend.c "Extendable" is spelled "extendible". ./src/H5Farray.c ./src/H5V.c ./src/H5Vprivate.h ./test/hyperslab.c Strides are now type ssize_t instead of int. These have nothing to do with the sample granularity arguments for hyperslabs, which are also called "strides" in the code. ./test/tstab.c Changed assumptions about default address and length sizes.
1998-03-05 00:20:23 +08:00
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
[svn-r339] Changes since 19980408 ---------------------- ./src/H5Osdspace.c ./html/H5.format.html In the past we were allowed to have >2GB files on a 32-bit machine as long as no dataset within the file was larger than 4GB (or whatever sizeof(size_t) is). That's been fixed now. All dataset size calculations are done with `hsize_t' which is normally defined as `unsigned long long'. ./src/H5F.c ./src/H5Ffamily.c ./src/H5Fprivate.h ./src/H5P.c ./src/H5Ppublic.h The file family member size can now be set/queried. The default is still 64MB, but it can be set to 1GB by saying: H5Pset_family (plist, 30, H5P_DEFAULT); When opening an existing file family the specified bits-per-member is ignored and the first member of the family determines the bits-per-member, which can be retrieved with H5Pget_family(). ./acconfig.h ./configure.in ./src/H5config.h ./src/H5public.h Added `--disable-hsizet' so that those with old GCC compilers (<2.8.1) can still compile the code. ./src/H5.c ./src/H5private.h Added HDfprintf() which works just like fprintf() except you can give `H' as a size modifier for the integer conversions and supply an `hsize_t' or `hssize_t' argument without casting it. For instance: hsize_t npoints = H5Sget_npoints(space); HDfprintf(stdout,"Dataset has %Hd (%#018Hx) points\n", npoints, npoints); You can now give `%a' as a format to print an address, but all formating flags are ignored and it causes the return value of HDfprintf() to not include the characters in the address (but who uses the return value anyway :-). Example: H5G_t *grp; HDfprintf(stdout, "Group object header at %a\n", &(grp->ent.header)); Added HDstrtoll() which works exactly like [HD]strtol() except the result is an int64. ./src/debug.c Large addresses can now be entered from the command-line. Use either decimal, octal (leading `0') or hexadecimal (leading `0x') when giving the address. ./src/h5ls.c The printf format for dataset dimensions was changed to `%Hu' to support large datasets. ./test/big.c [NEW] A test for big datasets on 32-bit machines. This test is not run by default. Don't try to run it on an nfs-mounted file system or other file system that doesn't support holes because it creates two 32GB datasets of all zero.
1998-04-10 04:22:11 +08:00
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
@HAVE_SHARED_CONDITIONAL_FALSE@install-exec-hook:
clean: clean-am
[svn-r735] Changes since 19981002 ---------------------- ./src/H5D.c Fill values are working for contiguous datasets now except there are two things that need more support from the data space layer, specifically the ability to form a selection from the difference of two selections. They are (1) extending an external contiguous dataset, (2) optimization by delaying the fill until after the first H5Dwrite(). Renamed H5D_allocate() to H5D_init_storage() since allocation is only part of the story. Added a data space argument so it doesn't have to query the space from the object header -- the space is always available in the caller anyway. Removed `#ifdef HAVE_PARALLEL' from a few places where it wasn't necessary. We don't need it around code that doesn't compile anything from mpi.h or mpio.h. ./src/H5Fistore.c Uncommented H5F_istore_alloc() for non-parallel and moved the `#ifdef HAVE_PARALLEL' just around Kim's barrier. ./src/H5Fmpio.c Wrapped a couple long lines. Got rid of two signed vs. unsigned comparison warnings. ./MANIFEST ./test/Makefile.in ./test/fillval.c [NEW] Added tests for fill values. The contiguous dataset extend test is disabled until H5S_SELECT_DIFF is implemented. ./tools/Makefile.in Fixed a bug where `make test' didn't build the executables first. This should cause the snapshots to start up again. ./Makefile.in Changed to build in `test' directory before `tools' directory. We want the library tests to pass before we even start considering the tools. You can still build and/or test the tools independent of the library tests passing.
1998-10-06 05:01:10 +08:00
clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
clean-libtool clean-noinstLTLIBRARIES clean-noinstPROGRAMS \
mostlyclean-am
distclean: distclean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
[svn-r1621] Added GASS driver. Coded by Saurabh Bagchi, bagchi@uiuc.edu. Minor changes done to test/gass_xxx.c so that they print the test skip message when GASS driver is not available. This change is the implementation of GASS within HDF5-1.3 (HDF5 with Virtual File Layer). The GASS driver gives the facility of accessing HDF files on remote ftp servers. To use the GASS driver, the option --with-gass=<GASS path> shoud be specified with configure. An example of the command line used to test the distribution was: ./configure --disable-shared --without-hdf4 --with-gass=/afs/ncsa/projects/hdf/v5/bagchi/globus/GLB/development/sparc-sun-solaris2.6_nothreads_standard_debug/include,/afs/ncsa/projects/hdf/v5/bagchi/globus/GLB/development/sparc-sun-solaris2.6_nothreads_standard_debug/lib --disable-parallel The user should change the path to point to his local GASS installation. Documentation about the features of GASS and the HDF-GASS design is available separately and till it is put up on the official web site, anyone interested may contact me. Test programs to read, write or append remote files have been provided in the test directory as "gass_read.c", "gass_write.c", "gass_append.c". The test programs have the ftp site to access #define-d at the top of the file which the user can change accordingly. ./src/H5Epublic. Added new error type for file close. ./src/H5F.c Added hooks for the GASS driver. ./src/H5public.h Added header files for GASS & Globus. ./src/Makefile.in Added dependancy on GASS driver in LIB_SRC. ./src/hdf5.h Included header file for GASS driver. ./src/H5FDgass.c [NEW] Routines for the GASS driver. ./src/H5FDgass.h [NEW] Header file for the GASS driver. ./test/Makefile.in Added dependancy on the gass test routines. ./test/gass_read.c File to test remote file reading using GASS. ./test/gass_write.c File to test remote file writing using GASS. ./test/gass_append.c File to test remote file appending using GASS.
1999-08-31 12:55:00 +08:00
info-am:
[svn-r1621] Added GASS driver. Coded by Saurabh Bagchi, bagchi@uiuc.edu. Minor changes done to test/gass_xxx.c so that they print the test skip message when GASS driver is not available. This change is the implementation of GASS within HDF5-1.3 (HDF5 with Virtual File Layer). The GASS driver gives the facility of accessing HDF files on remote ftp servers. To use the GASS driver, the option --with-gass=<GASS path> shoud be specified with configure. An example of the command line used to test the distribution was: ./configure --disable-shared --without-hdf4 --with-gass=/afs/ncsa/projects/hdf/v5/bagchi/globus/GLB/development/sparc-sun-solaris2.6_nothreads_standard_debug/include,/afs/ncsa/projects/hdf/v5/bagchi/globus/GLB/development/sparc-sun-solaris2.6_nothreads_standard_debug/lib --disable-parallel The user should change the path to point to his local GASS installation. Documentation about the features of GASS and the HDF-GASS design is available separately and till it is put up on the official web site, anyone interested may contact me. Test programs to read, write or append remote files have been provided in the test directory as "gass_read.c", "gass_write.c", "gass_append.c". The test programs have the ftp site to access #define-d at the top of the file which the user can change accordingly. ./src/H5Epublic. Added new error type for file close. ./src/H5F.c Added hooks for the GASS driver. ./src/H5public.h Added header files for GASS & Globus. ./src/Makefile.in Added dependancy on GASS driver in LIB_SRC. ./src/hdf5.h Included header file for GASS driver. ./src/H5FDgass.c [NEW] Routines for the GASS driver. ./src/H5FDgass.h [NEW] Header file for the GASS driver. ./test/Makefile.in Added dependancy on the gass test routines. ./test/gass_read.c File to test remote file reading using GASS. ./test/gass_write.c File to test remote file writing using GASS. ./test/gass_append.c File to test remote file appending using GASS.
1999-08-31 12:55:00 +08:00
install-data-am:
[svn-r1621] Added GASS driver. Coded by Saurabh Bagchi, bagchi@uiuc.edu. Minor changes done to test/gass_xxx.c so that they print the test skip message when GASS driver is not available. This change is the implementation of GASS within HDF5-1.3 (HDF5 with Virtual File Layer). The GASS driver gives the facility of accessing HDF files on remote ftp servers. To use the GASS driver, the option --with-gass=<GASS path> shoud be specified with configure. An example of the command line used to test the distribution was: ./configure --disable-shared --without-hdf4 --with-gass=/afs/ncsa/projects/hdf/v5/bagchi/globus/GLB/development/sparc-sun-solaris2.6_nothreads_standard_debug/include,/afs/ncsa/projects/hdf/v5/bagchi/globus/GLB/development/sparc-sun-solaris2.6_nothreads_standard_debug/lib --disable-parallel The user should change the path to point to his local GASS installation. Documentation about the features of GASS and the HDF-GASS design is available separately and till it is put up on the official web site, anyone interested may contact me. Test programs to read, write or append remote files have been provided in the test directory as "gass_read.c", "gass_write.c", "gass_append.c". The test programs have the ftp site to access #define-d at the top of the file which the user can change accordingly. ./src/H5Epublic. Added new error type for file close. ./src/H5F.c Added hooks for the GASS driver. ./src/H5public.h Added header files for GASS & Globus. ./src/Makefile.in Added dependancy on GASS driver in LIB_SRC. ./src/hdf5.h Included header file for GASS driver. ./src/H5FDgass.c [NEW] Routines for the GASS driver. ./src/H5FDgass.h [NEW] Header file for the GASS driver. ./test/Makefile.in Added dependancy on the gass test routines. ./test/gass_read.c File to test remote file reading using GASS. ./test/gass_write.c File to test remote file writing using GASS. ./test/gass_append.c File to test remote file appending using GASS.
1999-08-31 12:55:00 +08:00
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am: install-libLTLIBRARIES
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool mostlyclean-local
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-libLTLIBRARIES
.MAKE: check-am install-am install-exec-am install-strip
.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
check-am clean clean-checkPROGRAMS clean-generic \
clean-libLTLIBRARIES clean-libtool clean-noinstLTLIBRARIES \
clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \
distclean-compile distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-exec-hook \
install-html install-html-am install-info install-info-am \
install-libLTLIBRARIES install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
uninstall-libLTLIBRARIES
# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
# This tells the Makefiles that these targets are not files to be built but
# commands that should be executed even if a file with the same name already
# exists.
.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
build-tests check-clean check-install check-p check-s check-vfd \
install-doc lib progs tests uninstall-doc _exec_check-s _test help
help:
@$(top_srcdir)/bin/makehelp
@HAVE_SHARED_CONDITIONAL_TRUE@ # The libh5test library provides common support code for the tests.
@HAVE_SHARED_CONDITIONAL_TRUE@ # The libdynlib1 and libdynlib2 library for testing plugin module plugin.c.
@HAVE_SHARED_CONDITIONAL_TRUE@ # Build it as shared library if configure is enabled for shared library.
@HAVE_SHARED_CONDITIONAL_TRUE@install-exec-hook:
@HAVE_SHARED_CONDITIONAL_TRUE@ $(RM) $(DESTDIR)$(libdir)/*dynlib*
@HAVE_SHARED_CONDITIONAL_FALSE@ # The libh5test library provides common support code for the tests.
# Additional target for running timing test
timings _timings: testmeta
@for timing in $(TIMINGS) dummy; do \
if test $$timing != dummy; then \
echo "Running $$timing $(TEST_FLAGS)"; \
$(RUNEXEC) ./$$timing $(TEST_FLAGS) || exit 1; \
fi; \
done;
# The flush1 test must run before the flush2 test
flush2.chkexe_: flush1.chkexe_
# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
build-lib: $(LIB)
build-progs: $(LIB) $(PROGS)
build-tests: $(LIB) $(PROGS) $(chk_TESTS)
# General rule for recursive building targets.
# BUILT_SOURCES contain targets that need to be built before anything else
# in the directory (e.g., for Fortran type detection)
lib progs tests check-s check-p :: $(BUILT_SOURCES)
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
# General rule for recursive cleaning targets. Like the rule above,
# but doesn't require building BUILT_SOURCES.
check-clean ::
@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
@for d in X $(SUBDIRS); do \
if test $$d != X && test $$d != .; then \
(set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \
fi; \
done
# Tell Automake to build tests when the user types `make all' (this is
# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since
# Automake won't build them automatically, either.
all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
# UPDATE: docs no longer reside in this build tree, so this target
# is depreciated.
install-doc uninstall-doc:
@echo "Nothing to be done."
# clean up files generated by tests so they can be re-run.
build-check-clean:
$(RM) -rf $(CHECK_CLEANFILES)
# run check-clean whenever mostlyclean is run
mostlyclean-local: build-check-clean
# check-install is just a synonym for installcheck
check-install: installcheck
# Run each test in order, passing $(TEST_FLAGS) to the program.
# Since tests are done in a shell loop, "make -i" does apply inside it.
# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
# The timestamps give a rough idea how much time the tests use.
#
# Note that targets in chk_TESTS (defined above) will be built when the user
# types 'make tests' or 'make check', but only programs in TEST_PROG,
# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
check-TESTS: test
test _test:
@$(MAKE) build-check-s
@$(MAKE) build-check-p
# Actual execution of check-s.
build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
fi
@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \
echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
fi
_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
# $${log} is the log file.
# $${tname} is the name of test.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
tname=$(@:.chkexe_=)$(EXEEXT);\
log=$(@:.chkexe_=.chklog); \
echo "============================"; \
if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
echo "No need to test $${tname} again."; \
else \
echo "============================" > $${log}; \
if test "X$(FORTRAN_API)" = "Xyes"; then \
echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
elif test "X$(CXX_API)" = "Xyes"; then \
echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
else \
echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
fi; \
echo "============================" >> $${log}; \
srcdir="$(srcdir)" \
$(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
&& touch $(@:.chkexe_=.chkexe) || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
(cat $${log} && false) || exit 1; \
echo "" >> $${log}; \
echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
echo "============================" >> $${log}; \
echo "Finished testing $${tname} $(TEST_FLAGS)"; \
cat $${log}; \
fi; \
fi
# The dummysh.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
# $${log} is the log file.
# $${tname} is the name of test.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
cmd=$(@:.chkexe_=);\
tname=`basename $$cmd`;\
chkname=`basename $(@:.chkexe_=.chkexe)`;\
log=`basename $(@:.chkexe_=.chklog)`; \
echo "============================"; \
if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
echo "No need to test $${tname} again."; \
else \
echo "============================" > $${log}; \
if test "X$(FORTRAN_API)" = "Xyes"; then \
echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
elif test "X$(CXX_API)" = "Xyes"; then \
echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
else \
echo "Testing $${tname} $(TEST_FLAGS)"; \
echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
fi; \
echo "============================" >> $${log}; \
RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \
srcdir="$(srcdir)" \
$(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
&& touch $${chkname} || \
(test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
(cat $${log} && false) || exit 1; \
echo "" >> $${log}; \
echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
echo "============================" >> $${log}; \
echo "Finished testing $${tname} $(TEST_FLAGS)"; \
cat $${log}; \
fi; \
echo "============================"; \
fi
# Actual execution of check-p.
build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
fi
@if test -n "$(TEST_PROG_PARA)"; then \
echo "**** Hint ****"; \
echo "Parallel test files reside in the current directory" \
"by default."; \
echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \
echo " HDF5_PARAPREFIX=/PFS/user/me"; \
echo " export HDF5_PARAPREFIX"; \
echo " make check"; \
echo "**** end of Hint ****"; \
fi
@for test in $(TEST_PROG_PARA) dummy; do \
if test $$test != dummy; then \
$(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
RUNEXEC="$(RUNPARALLEL)" || exit 1; \
fi; \
done
@for test in $(TEST_SCRIPT_PARA) dummy; do \
if test $$test != dummy; then \
$(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
fi; \
done
@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \
echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
fi
# Run test with different Virtual File Driver
check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
@for vfd in $(VFD_LIST) dummy; do \
if test $$vfd != dummy; then \
echo "============================"; \
echo "Testing Virtual File Driver $$vfd"; \
echo "============================"; \
$(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \
HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \
fi; \
done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: