Its only purpose was to prevent importing CSV files as translations, but it
would still import them as *nothing*, leading to workflow issues.
This is now properly fixed with #47268 which allows disabling the import for
specific files.
* Added option for importers to show an Advanced settings dialog
* Created advanced settings dialog for Scene Importer
* Cleaned up importers (remove many old/unused options)
* Added the ability to customize every node, material, mesh and animation individually
* Saving to animations and meshes to files is now a manual process, making it more predictable
* Added the ability for materials to be replaced by external files (or to be made external, up to you).
* When doubleclicking an impoted scene in the filesystem dock, it automatically shows the import settings instead of asking to open it.
WARNING: Lightmap UV unwrap is not working, it needs to be re-made.
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
-Added a new method in Resource: reset_state , used for reloading the same resource from disk
-Added a new cache mode "replace" in ResourceLoader, which reuses existing loaded sub-resources but resets their data from disk (or replaces them if they chaged type)
-Because the correct sub-resource paths are always loaded now, this fixes bugs with subresource folding or subresource ordering when saving.
-When importing, a vertex-only version of the mesh is created.
-This version is used when rendering shadows, and improves performance by reducing bandwidth
-It's automatic, but can optionally be used by users, in case they want to make special versions of geometry for shadow casting.
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
Blendshapes without a skeleton already worked.
However, due to a faulty ERR_FAIL_COND, it was impossible to create a mesh with both bones and blendshapes.
This also fixes an assumption that all surfaces reference the same number of bones as surface 0.
* Support KHR_texture_transform.
* Support exporting glTF2
* Support exporting instanced scenes
* Extract into a gltf state and gltf document
* Add a tools menu for exporting gltf2
This makes it possible to view far away objects without
having to tweak any settings. This results in a more usable
editor when working on large-scale levels.
This change should have no impact on performance, but note that
Z-fighting will be visible at a distance. This can be made less
visible by increasing the Znear value (however, doing so will cause
nearby surfaces to disappear).
This change was also applied to the editor, but it will only
apply to newly created scenes.
This also changes the default camera settings in the glTF importer
to match the Camera node's defaults.
-Happens on import by default for all models
-Just works (tm)
-Biasing can be later adjusted per node or per viewport (as well as globally)
-Disabled AABB.get_support test because its broken
-Reworked how meshes are treated by importer by using EditorSceneImporterMesh and EditorSceneImporterMeshNode. Instead of Mesh and MeshInstance, this allows more efficient processing of meshes before they are actually registered in the RenderingServer.
-Integrated MeshOptimizer
-Reworked internals of SurfaceTool to use arrays, making it more performant and easy to run optimizatons on.
We haven't had a proper implementation for COMPRESS_PVRTC2 (which is PVRTC1 2-bpp) in years,
so let's drop it instead of keeping a compress type which doesn't work.
The other enum values were renamed to clarify that our PVRTC2 and PVRTC4 are respectively
PVRTC1 2-bpp and PVRTC1 4-bpp. PVRTC2 2-bpp and 4-bpp are not implemented yet.
-Changed how mesh data is organized, hoping to make it more efficient on Vulkan and GLES.
-Removed compression, it now always uses the most efficient format.
-Added support for custom arrays (up to 8 custom formats)
-Added support for 8 weights in skeleton data.
-Added a simple optional versioning system for imported assets, to reimport if binary is newer
-Fixes #43979 (I needed to test)
WARNING:
-NOT backwards compatible with previous 4.x-devel, will most likely never be, but it will force reimport scenes due to version change.
-NOT backwards compatible with 3.x scenes, this will be eventually re-added.
-Skeletons not working any longer, will fix in next PR.
1. _gen_unique_bone_name(Ref<GLTFState> state, const GLTFSkeletonIndex skel_i, const String &p_name) won't return an empty string.
2. String GLTFDocument::_sanitize_bone_name(const String &name) will keep Japanese characters. Like: "全ての親".
3. The sanitize function allows the bone name to be not just alphanumeric. The only required conditions are the ones in add_bone.
> ERR_FAIL_COND(p_name == "" || p_name.find(":") != -1 || p_name.find("/") != -1);
The glTF 2.0 spec only makes `mimeType` mandatory for `bufferView` image data,
so the previous logic to handle URIs with base64-encoded images could fail if
`mimeType` is undefined.
The logic was documented and refactored to better handle the spec, notably:
- `uri` and `bufferView` are now mutually exclusive, and only the latter fails
if `mimeType` is undefined.
- `uri` with a file path will now respect the `mimeType` if defined, and thus
attempt loading the file with the specified format (even if its extension is
not the one expected for this format). So we can support bad extensions (PNG
data with `.jpg` extension) or custom ones (PNG data in `.img` file for
example).
- `uri` with base64 encoded data will infer MIME type from `data:image/png` or
`data:image/jpeg` if it was not documented in `mimeType` initially.
- `uri` with base64 encoded data, no `mimeType` and `application/octet-stream`
or `application/gltf-buffer` will fall back to trying both PNG and JPEG
loaders.
Fully fixes#33796 (and fixes up #42501).
See https://github.com/KhronosGroup/glTF/issues/944 for context on the
application/gltf-buffer MIME type.
The glTF 2.0 spec supports `image/jpeg` and `image/png` which can also be
base64-encoded in buffer URIs.
Fixes#33796.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
-Added LocalVector (needed it)
-Added stb_rect_pack (It's pretty cool, we could probably use it for other stuff too)
-Fixes and changes all around the place
-Added library for 128 bits fixed point (required for Delaunay3D)
This reverts commit ec7b481170.
This was wrong, `d` is not a distance but the `d` constant in the
parametric equation `ax + by + cz = d` describing the plane.
This commit adds caching to the lightmap mesh unwraps generated on
import. This speeds up re-imports of meshes that haven't changed and
also makes sure that the unwraps are consistent across imports.
The unwrapping process is not deterministic, so one could end up with
a different mapping every time the scene was imported, breaking any
previously baked lightmaps. The changes in this commit prevent that
from happening.
Also added an easier way to load native GLSL shaders.
Extras:
Had to fix no-cache for subresources in resource loader, it was not properly working, making shaders not properly reload.
Note:
The precommit hooks are broken because they don't seem to support enums from one class being used in another.
Feel free to fix this after merging this PR.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
PR #30877 was bogus as it made a blend shape-specific code block apply
to everything but blend shapes (as it seemed not to work properly *for*
blend shapes).
The proper fix should thus be to simply remove the problematic
block (and thus cleanup unnecessary logic).
Fixes#32712.
Now that the unused DocDump was removed, the `editor/doc` subfolder is
redundant.
Similarly, there's no reason for Collada to have a subfolder for itself
when glTF or OBJ don't.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
