Some of the methods of this class require a property name. You can get the property name by hovering over the property in the inspector of the editor.
Many of the methods accept [code]trans_type[/code] and [code]ease_type[/code]. The first accepts an TRANS_* constant, and refers to the way the timing of the animation is handled (you might want to see [code]http://easings.net/[/code] for some examples). The second accepts an EASE_* constant, and controls the where [code]trans_type[/code] is applied to the interpolation (in the beginning, the end, or both). If you don't know which transision and easing to pick, you can try different TRANS_* constants with EASE_IN_OUT, and use the one that looks best.
Follow [code]method[/code] of [code]object[/code] and apply the returned value on [code]target_method[/code] of [code]target[/code], beginning from [code]initial_val[/code] for [code]duration[/code] seconds, [code]delay[/code] later. Methods are animated by calling them with consequitive values.
[code]trans_type[/code] accepts TRANS_* constants, and is the way the animation is interpolated, while [code]ease_type[/code] accepts EASE_* constants, and controls the place of the interpolation (the beginning, the end, or both). You can read more about them in the class description.
Follow [code]property[/code] of [code]object[/code] and apply it on [code]target_property[/code] of [code]target[/code], beginning from [code]initial_val[/code] for [code]duration[/code] seconds, [code]delay[/code] seconds later. Note that [code]target:target_property[/code] would equal [code]object:property[/code] at the end of the tween.
[code]trans_type[/code] accepts TRANS_* constants, and is the way the animation is interpolated, while [code]ease_type[/code] accepts EASE_* constants, and controls the place of the interpolation (the beginning, the end, or both). You can read more about them in the class description.
</description>
</method>
<methodname="get_runtime"qualifiers="const">
<returntype="float">
</return>
<description>
Returns the time needed for all tweens to end in seconds, measured from the start. Thus, if you have two tweens, one ending 10 seconds after the start and the other - 20 seconds, it would return 20 seconds, as by that time all tweens would have finished.
</description>
</method>
<methodname="get_speed_scale"qualifiers="const">
<returntype="float">
</return>
<description>
Returns the speed that has been set from editor GUI or [method set_repeat].
Call [code]callback[/code] of [code]object[/code] after [code]duration[/code]. [code]arg1[/code]-[code]arg5[/code] are arguments to be passed to the callback.
Call [code]callback[/code] of [code]object[/code] after [code]duration[/code] on the main thread (similar to [methog Object.call_deferred). [code]arg1[/code]-[code]arg5[/code] are arguments to be passed to the callback.
Animate [code]method[/code] of [code]object[/code] from [code]initial_val[/code] to [code]final_val[/code] for [code]duration[/code] seconds, [code]delay[/code] seconds later. Methods are animated by calling them with consecuitive values.
[code]trans_type[/code] accepts TRANS_* constants, and is the way the animation is interpolated, while [code]ease_type[/code] accepts EASE_* constants, and controls the place of the interpolation (the beginning, the end, or both). You can read more about them in the class description.
Animate [code]property[/code] of [code]object[/code] from [code]initial_val[/code] to [code]final_val[/code] for [code]duration[/code] seconds, [code]delay[/code] seconds later.
[code]trans_type[/code] accepts TRANS_* constants, and is the way the animation is interpolated, while [code]ease_type[/code] accepts EASE_* constants, and controls the place of the interpolation (the beginning, the end, or both). You can read more about them in the class description.
</description>
</method>
<methodname="is_active"qualifiers="const">
<returntype="bool">
</return>
<description>
Returns true if any tweens are currently running, and false otherwise. Note that this method doesn't consider tweens that have ended.
</description>
</method>
<methodname="is_repeat"qualifiers="const">
<returntype="bool">
</return>
<description>
Returns true if repeat has been set from editor GUI or [method set_repeat].
Stop animating and completely remove a tween, given its object and property/method pair. Passing empty String as key will remove all tweens for given object.
Resets a tween to the initial value (the one given, not the one before the tween), given its object and property/method pair. Passing empty String as key will reset all tweens for given object.
</description>
</method>
<methodname="reset_all">
<returntype="bool">
</return>
<description>
Resets all tweens to their initial values (the ones given, not those before the tween).
Continue animating a stopped tween, given its object and property/method pair. Passing empty String as key will resume all tweens for given object.
</description>
</method>
<methodname="resume_all">
<returntype="bool">
</return>
<description>
Continue animating all stopped tweens.
</description>
</method>
<methodname="seek">
<returntype="bool">
</return>
<argumentindex="0"name="time"type="float">
</argument>
<description>
Seek the animation to the given [code]time[/code] in seconds.
</description>
</method>
<methodname="set_active">
<returntype="void">
</return>
<argumentindex="0"name="active"type="bool">
</argument>
<description>
Activate/deactivate the tween. You can use this for pausing animations, though [method stop_all] and [method resume_all] might be more fit for this.
</description>
</method>
<methodname="set_repeat">
<returntype="void">
</return>
<argumentindex="0"name="repeat"type="bool">
</argument>
<description>
Make the tween repeat after all tweens have finished.
</description>
</method>
<methodname="set_speed_scale">
<returntype="void">
</return>
<argumentindex="0"name="speed"type="float">
</argument>
<description>
Set the speed multiplier of the tween. Set it to 1 for normal speed, 2 for two times nromal speed, and 0.5 for half of the normal speed. Setting it to 0 would pause the animation, but you might consider using [method set_active] or [method stop_all] and [method resume_all] for this.
Set whether the Tween uses [code]_process[/code] or [code]_physics_process[/code] (accepts TWEEN_PROCESS_IDLE and TWEEN_PROCESS_PHYSICS constants, respectively).
Animate [code]method[/code] of [code]object[/code] from the value returned by [code]initial.initial_method[/code] to [code]final_val[/code] for [code]duration[/code] seconds, [code]delay[/code] seconds later. Methods are animated by calling them with consecuitive values.
[code]trans_type[/code] accepts TRANS_* constants, and is the way the animation is interpolated, while [code]ease_type[/code] accepts EASE_* constants, and controls the place of the interpolation (the beginning, the end, or both). You can read more about them in the class description.
Animate [code]property[/code] of [code]object[/code] from the current value of the [code]initial_val[/code] property of [code]initial[/code] to [code]final_val[/code] for [code]duration[/code] seconds, [code]delay[/code] seconds later.
[code]trans_type[/code] accepts TRANS_* constants, and is the way the animation is interpolated, while [code]ease_type[/code] accepts EASE_* constants, and controls the place of the interpolation (the beginning, the end, or both). You can read more about them in the class description.
