godot/doc/classes/AudioEffectDelay.xml

<?xml version="1.0" encoding="UTF-8" ?>
<class name="AudioEffectDelay" inherits="AudioEffect" version="4.0">
	<brief_description>
		Adds a delay audio effect to an audio bus. Plays input signal back after a period of time.
		Two tap delay and feedback options.
	</brief_description>
	<description>
		Plays input signal back after a period of time. The delayed signal may be played back multiple times to create the sound of a repeating, decaying echo. Delay effects range from a subtle echo effect to a pronounced blending of previous sounds with new sounds.
	</description>
	<tutorials>
	</tutorials>
	<members>
		<member name="dry" type="float" setter="set_dry" getter="get_dry" default="1.0">
			Output percent of original sound. At 0, only delayed sounds are output. Value can range from 0 to 1.
		</member>
		<member name="feedback/active" type="bool" setter="set_feedback_active" getter="is_feedback_active" default="false">
			If [code]true[/code], feedback is enabled.
		</member>
		<member name="feedback/delay_ms" type="float" setter="set_feedback_delay_ms" getter="get_feedback_delay_ms" default="340.0">
			Feedback delay time in milliseconds.
		</member>
		<member name="feedback/level_db" type="float" setter="set_feedback_level_db" getter="get_feedback_level_db" default="-6.0">
			Sound level for [code]tap1[/code].
		</member>
		<member name="feedback/lowpass" type="float" setter="set_feedback_lowpass" getter="get_feedback_lowpass" default="16000.0">
			Low-pass filter for feedback, in Hz. Frequencies below this value are filtered out of the source signal.
		</member>
		<member name="tap1/active" type="bool" setter="set_tap1_active" getter="is_tap1_active" default="true">
			If [code]true[/code], [code]tap1[/code] will be enabled.
		</member>
		<member name="tap1/delay_ms" type="float" setter="set_tap1_delay_ms" getter="get_tap1_delay_ms" default="250.0">
			[code]tap1[/code] delay time in milliseconds.
		</member>
		<member name="tap1/level_db" type="float" setter="set_tap1_level_db" getter="get_tap1_level_db" default="-6.0">
			Sound level for [code]tap1[/code].
		</member>
		<member name="tap1/pan" type="float" setter="set_tap1_pan" getter="get_tap1_pan" default="0.2">
			Pan position for [code]tap1[/code]. Value can range from -1 (fully left) to 1 (fully right).
		</member>
		<member name="tap2/active" type="bool" setter="set_tap2_active" getter="is_tap2_active" default="true">
			If [code]true[/code], [code]tap2[/code] will be enabled.
		</member>
		<member name="tap2/delay_ms" type="float" setter="set_tap2_delay_ms" getter="get_tap2_delay_ms" default="500.0">
			[b]Tap2[/b] delay time in milliseconds.
		</member>
		<member name="tap2/level_db" type="float" setter="set_tap2_level_db" getter="get_tap2_level_db" default="-12.0">
			Sound level for [code]tap2[/code].
		</member>
		<member name="tap2/pan" type="float" setter="set_tap2_pan" getter="get_tap2_pan" default="-0.4">
			Pan position for [code]tap2[/code]. Value can range from -1 (fully left) to 1 (fully right).
		</member>
	</members>
</class>
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`<?xml version="1.0" encoding="UTF-8" ?>`
Update docs to version 4.0 2020-02-01 09:03:48 +08:00			`<class name="AudioEffectDelay" inherits="AudioEffect" version="4.0">`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`<brief_description>`
Proofread and improve the whole class reference - Document a few more properties and methods - Add more information to many classes - Fix lots of typos and gramar mistakes - Use [code] tags for parameters consistently - Use [b] and [i] tags consistently - Put "Warning:" and "Note:" on their own line to be more visible, and make them always bold - Tweak formatting in code examples to be more readable - Use double quotes consistently - Add more links to third-party technologies 2019-06-22 07:04:47 +08:00			`Adds a delay audio effect to an audio bus. Plays input signal back after a period of time.`
[DOCS] Adds AudioEffects doc 2017-09-17 00:47:19 +08:00			`Two tap delay and feedback options.`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</brief_description>`
			`<description>`
[DOCS] Adds AudioEffects doc 2017-09-17 00:47:19 +08:00			`Plays input signal back after a period of time. The delayed signal may be played back multiple times to create the sound of a repeating, decaying echo. Delay effects range from a subtle echo effect to a pronounced blending of previous sounds with new sounds.`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</description>`
			`<tutorials>`
			`</tutorials>`
			`<members>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="dry" type="float" setter="set_dry" getter="get_dry" default="1.0">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`Output percent of original sound. At 0, only delayed sounds are output. Value can range from 0 to 1.`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="feedback/active" type="bool" setter="set_feedback_active" getter="is_feedback_active" default="false">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`If [code]true[/code], feedback is enabled.`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="feedback/delay_ms" type="float" setter="set_feedback_delay_ms" getter="get_feedback_delay_ms" default="340.0">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`Feedback delay time in milliseconds.`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="feedback/level_db" type="float" setter="set_feedback_level_db" getter="get_feedback_level_db" default="-6.0">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`Sound level for [code]tap1[/code].`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="feedback/lowpass" type="float" setter="set_feedback_lowpass" getter="get_feedback_lowpass" default="16000.0">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`Low-pass filter for feedback, in Hz. Frequencies below this value are filtered out of the source signal.`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="tap1/active" type="bool" setter="set_tap1_active" getter="is_tap1_active" default="true">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`If [code]true[/code], [code]tap1[/code] will be enabled.`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="tap1/delay_ms" type="float" setter="set_tap1_delay_ms" getter="get_tap1_delay_ms" default="250.0">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`[code]tap1[/code] delay time in milliseconds.`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="tap1/level_db" type="float" setter="set_tap1_level_db" getter="get_tap1_level_db" default="-6.0">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`Sound level for [code]tap1[/code].`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="tap1/pan" type="float" setter="set_tap1_pan" getter="get_tap1_pan" default="0.2">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`Pan position for [code]tap1[/code]. Value can range from -1 (fully left) to 1 (fully right).`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="tap2/active" type="bool" setter="set_tap2_active" getter="is_tap2_active" default="true">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`If [code]true[/code], [code]tap2[/code] will be enabled.`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="tap2/delay_ms" type="float" setter="set_tap2_delay_ms" getter="get_tap2_delay_ms" default="500.0">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`[b]Tap2[/b] delay time in milliseconds.`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="tap2/level_db" type="float" setter="set_tap2_level_db" getter="get_tap2_level_db" default="-12.0">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`Sound level for [code]tap2[/code].`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
doc: Add default values to all properties Thanks to @bojidar-bg's impressive work in #29380. 2019-06-29 18:38:01 +08:00			`<member name="tap2/pan" type="float" setter="set_tap2_pan" getter="get_tap2_pan" default="-0.4">`
doc: Remove hardcoded default values from descriptions They are now generated automatically by doctool. 2019-06-29 21:24:23 +08:00			`Pan position for [code]tap2[/code]. Value can range from -1 (fully left) to 1 (fully right).`
Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will recognize them. 2017-09-13 04:42:36 +08:00			`</member>`
			`</members>`
			`</class>`