glibc/manual/tunables.texi

@node Tunables
@c @node Tunables, , Internal Probes, Top
@c %MENU% Tunable switches to alter libc internal behavior
@chapter Tunables
@cindex tunables

@dfn{Tunables} are a feature in @theglibc{} that allows application authors and
distribution maintainers to alter the runtime library behavior to match
their workload. These are implemented as a set of switches that may be
modified in different ways. The current default method to do this is via
the @env{GLIBC_TUNABLES} environment variable by setting it to a string
of colon-separated @var{name}=@var{value} pairs.  For example, the following
example enables malloc checking and sets the malloc trim threshold to 128
bytes:

@example
GLIBC_TUNABLES=glibc.malloc.trim_threshold=128:glibc.malloc.check=3
export GLIBC_TUNABLES
@end example

Tunables are not part of the @glibcadj{} stable ABI, and they are
subject to change or removal across releases.  Additionally, the method to
modify tunable values may change between releases and across distributions.
It is possible to implement multiple `frontends' for the tunables allowing
distributions to choose their preferred method at build time.

Finally, the set of tunables available may vary between distributions as
the tunables feature allows distributions to add their own tunables under
their own namespace.

@menu
* Tunable names::  The structure of a tunable name
* Memory Allocation Tunables::  Tunables in the memory allocation subsystem
* Hardware Capability Tunables::  Tunables that modify the hardware
				  capabilities seen by @theglibc{}
@end menu

@node Tunable names
@section Tunable names
@cindex Tunable names
@cindex Tunable namespaces

A tunable name is split into three components, a top namespace, a tunable
namespace and the tunable name. The top namespace for tunables implemented in
@theglibc{} is @code{glibc}. Distributions that choose to add custom tunables
in their maintained versions of @theglibc{} may choose to do so under their own
top namespace.

The tunable namespace is a logical grouping of tunables in a single
module. This currently holds no special significance, although that may
change in the future.

The tunable name is the actual name of the tunable. It is possible that
different tunable namespaces may have tunables within them that have the
same name, likewise for top namespaces. Hence, we only support
identification of tunables by their full name, i.e. with the top
namespace, tunable namespace and tunable name, separated by periods.

@node Memory Allocation Tunables
@section Memory Allocation Tunables
@cindex memory allocation tunables
@cindex malloc tunables
@cindex tunables, malloc

@deftp {Tunable namespace} glibc.malloc
Memory allocation behavior can be modified by setting any of the
following tunables in the @code{malloc} namespace:
@end deftp

@deftp Tunable glibc.malloc.check
This tunable supersedes the @env{MALLOC_CHECK_} environment variable and is
identical in features.

Setting this tunable enables a special (less efficient) memory allocator for
the malloc family of functions that is designed to be tolerant against simple
errors such as double calls of free with the same argument, or overruns of a
single byte (off-by-one bugs). Not all such errors can be protected against,
however, and memory leaks can result.  The following list describes the values
that this tunable can take and the effect they have on malloc functionality:

@itemize @bullet
@item @code{0} Ignore all errors.  The default allocator continues to be in
use, but all errors are silently ignored.
@item @code{1} Report errors.  The alternate allocator is selected and heap
corruption, if detected, is reported as diagnostic messages to @code{stderr}
and the program continues execution.
@item @code{2} Abort on errors.  The alternate allocator is selected and if
heap corruption is detected, the program is ended immediately by calling
@code{abort}.
@item @code{3} Fully enabled.  The alternate allocator is selected and is fully
functional.  That is, if heap corruption is detected, a verbose diagnostic
message is printed to @code{stderr} and the program is ended by calling
@code{abort}.
@end itemize

Like @env{MALLOC_CHECK_}, @code{glibc.malloc.check} has a problem in that it
diverges from normal program behavior by writing to @code{stderr}, which could
by exploited in SUID and SGID binaries.  Therefore, @code{glibc.malloc.check}
is disabled by default for SUID and SGID binaries.  This can be enabled again
by the system administrator by adding a file @file{/etc/suid-debug}; the
content of the file could be anything or even empty.
@end deftp

@deftp Tunable glibc.malloc.top_pad
This tunable supersedes the @env{MALLOC_TOP_PAD_} environment variable and is
identical in features.

This tunable determines the amount of extra memory in bytes to obtain from the
system when any of the arenas need to be extended.  It also specifies the
number of bytes to retain when shrinking any of the arenas.  This provides the
necessary hysteresis in heap size such that excessive amounts of system calls
can be avoided.

The default value of this tunable is @samp{0}.
@end deftp

@deftp Tunable glibc.malloc.perturb
This tunable supersedes the @env{MALLOC_PERTURB_} environment variable and is
identical in features.

If set to a non-zero value, memory blocks are initialized with values depending
on some low order bits of this tunable when they are allocated (except when
allocated by calloc) and freed.  This can be used to debug the use of
uninitialized or freed heap memory. Note that this option does not guarantee
that the freed block will have any specific values. It only guarantees that the
content the block had before it was freed will be overwritten.

The default value of this tunable is @samp{0}.
@end deftp

@deftp Tunable glibc.malloc.mmap_threshold
This tunable supersedes the @env{MALLOC_MMAP_THRESHOLD_} environment variable
and is identical in features.

When this tunable is set, all chunks larger than this value in bytes are
allocated outside the normal heap, using the @code{mmap} system call. This way
it is guaranteed that the memory for these chunks can be returned to the system
on @code{free}. Note that requests smaller than this threshold might still be
allocated via @code{mmap}.

If this tunable is not set, the default value is set to @samp{131072} bytes and
the threshold is adjusted dynamically to suit the allocation patterns of the
program.  If the tunable is set, the dynamic adjustment is disabled and the
value is set as static.
@end deftp

@deftp Tunable glibc.malloc.trim_threshold
This tunable supersedes the @env{MALLOC_TRIM_THRESHOLD_} environment variable
and is identical in features.

The value of this tunable is the minimum size (in bytes) of the top-most,
releasable chunk in an arena that will trigger a system call in order to return
memory to the system from that arena.

If this tunable is not set, the default value is set as 128 KB and the
threshold is adjusted dynamically to suit the allocation patterns of the
program.  If the tunable is set, the dynamic adjustment is disabled and the
value is set as static.
@end deftp

@deftp Tunable glibc.malloc.mmap_max
This tunable supersedes the @env{MALLOC_MMAP_MAX_} environment variable and is
identical in features.

The value of this tunable is maximum number of chunks to allocate with
@code{mmap}.  Setting this to zero disables all use of @code{mmap}.

The default value of this tunable is @samp{65536}.
@end deftp

@deftp Tunable glibc.malloc.arena_test
This tunable supersedes the @env{MALLOC_ARENA_TEST} environment variable and is
identical in features.

The @code{glibc.malloc.arena_test} tunable specifies the number of arenas that
can be created before the test on the limit to the number of arenas is
conducted.  The value is ignored if @code{glibc.malloc.arena_max} is set.

The default value of this tunable is 2 for 32-bit systems and 8 for 64-bit
systems.
@end deftp

@deftp Tunable glibc.malloc.arena_max
This tunable supersedes the @env{MALLOC_ARENA_MAX} environment variable and is
identical in features.

This tunable sets the number of arenas to use in a process regardless of the
number of cores in the system.

The default value of this tunable is @code{0}, meaning that the limit on the
number of arenas is determined by the number of CPU cores online.  For 32-bit
systems the limit is twice the number of cores online and on 64-bit systems, it
is 8 times the number of cores online.
@end deftp

@node Hardware Capability Tunables
@section Hardware Capability Tunables
@cindex hardware capability tunables
@cindex hwcap tunables
@cindex tunables, hwcap
@cindex hwcaps tunables
@cindex tunables, hwcaps
@cindex data_cache_size tunables
@cindex tunables, data_cache_size
@cindex shared_cache_size tunables
@cindex tunables, shared_cache_size
@cindex non_temporal_threshold tunables
@cindex tunables, non_temporal_threshold

@deftp {Tunable namespace} glibc.tune
Behavior of @theglibc{} can be tuned to assume specific hardware capabilities
by setting the following tunables in the @code{tune} namespace:
@end deftp

@deftp Tunable glibc.tune.hwcap_mask
This tunable supersedes the @env{LD_HWCAP_MASK} environment variable and is
identical in features.

The @code{AT_HWCAP} key in the Auxilliary Vector specifies instruction set
extensions available in the processor at runtime for some architectures.  The
@code{glibc.tune.hwcap_mask} tunable allows the user to mask out those
capabilities at runtime, thus disabling use of those extensions.
@end deftp

@deftp Tunable glibc.tune.hwcaps
The @code{glibc.tune.hwcaps=-xxx,yyy,-zzz...} tunable allows the user to
enable CPU/ARCH feature @code{yyy}, disable CPU/ARCH feature @code{xxx}
and @code{zzz} where the feature name is case-sensitive and has to match
the ones in @code{sysdeps/x86/cpu-features.h}.

This tunable is specific to i386 and x86-64.
@end deftp

@deftp Tunable glibc.tune.x86_data_cache_size
The @code{glibc.tune.x86_data_cache_size} tunable allows the user to set
data cache size in bytes for use in memory and string routines.

This tunable is specific to i386 and x86-64.
@end deftp

@deftp Tunable glibc.tune.x86_shared_cache_size
The @code{glibc.tune.x86_shared_cache_size} tunable allows the user to
set shared cache size in bytes for use in memory and string routines.
@end deftp

@deftp Tunable glibc.tune.x86_non_temporal_threshold
The @code{glibc.tune.x86_non_temporal_threshold} tunable allows the user
to set threshold in bytes for non temporal store.

This tunable is specific to i386 and x86-64.
@end deftp