mirror of
git://sourceware.org/git/glibc.git
synced 2025-01-30 12:31:53 +08:00
f214606a0e
This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
341 lines
13 KiB
Makefile
341 lines
13 KiB
Makefile
# Copyright (C) 1991-2014 Free Software Foundation, Inc.
|
|
# This file is part of the GNU C Library.
|
|
|
|
# The GNU C Library is free software; you can redistribute it and/or
|
|
# modify it under the terms of the GNU Lesser General Public
|
|
# License as published by the Free Software Foundation; either
|
|
# version 2.1 of the License, or (at your option) any later version.
|
|
|
|
# The GNU C Library is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
# Lesser General Public License for more details.
|
|
|
|
# You should have received a copy of the GNU Lesser General Public
|
|
# License along with the GNU C Library; if not, see
|
|
# <http://www.gnu.org/licenses/>.
|
|
|
|
#
|
|
# Sub-makefile for POSIX portion of the library.
|
|
#
|
|
subdir := posix
|
|
|
|
include ../Makeconfig
|
|
|
|
headers := sys/utsname.h sys/times.h sys/wait.h sys/types.h unistd.h \
|
|
glob.h regex.h wordexp.h fnmatch.h getopt.h \
|
|
bits/types.h bits/typesizes.h bits/pthreadtypes.h \
|
|
bits/posix1_lim.h bits/posix2_lim.h bits/posix_opt.h \
|
|
bits/local_lim.h tar.h bits/utsname.h bits/confname.h \
|
|
bits/waitflags.h bits/waitstatus.h sys/unistd.h sched.h \
|
|
bits/sched.h re_comp.h wait.h bits/environments.h cpio.h \
|
|
sys/sysmacros.h spawn.h bits/unistd.h
|
|
|
|
routines := \
|
|
uname \
|
|
times \
|
|
wait waitpid wait3 wait4 waitid \
|
|
alarm sleep pause nanosleep \
|
|
fork vfork _exit \
|
|
execve fexecve execv execle execl execvp execlp execvpe \
|
|
getpid getppid \
|
|
getuid geteuid getgid getegid getgroups setuid setgid group_member \
|
|
getpgid setpgid getpgrp bsd-getpgrp setpgrp getsid setsid \
|
|
getresuid getresgid setresuid setresgid \
|
|
pathconf sysconf fpathconf \
|
|
glob glob64 fnmatch regex \
|
|
confstr \
|
|
getopt getopt1 getopt_init \
|
|
sched_setp sched_getp sched_sets sched_gets sched_yield sched_primax \
|
|
sched_primin sched_rr_gi sched_getaffinity sched_setaffinity \
|
|
getaddrinfo gai_strerror wordexp \
|
|
pread pwrite pread64 pwrite64 \
|
|
spawn_faction_init spawn_faction_destroy spawn_faction_addclose \
|
|
spawn_faction_addopen spawn_faction_adddup2 \
|
|
spawnattr_init spawnattr_destroy \
|
|
spawnattr_getdefault spawnattr_setdefault \
|
|
spawnattr_getflags spawnattr_setflags \
|
|
spawnattr_getpgroup spawnattr_setpgroup spawn spawnp spawni \
|
|
spawnattr_getsigmask spawnattr_getschedpolicy spawnattr_getschedparam \
|
|
spawnattr_setsigmask spawnattr_setschedpolicy spawnattr_setschedparam \
|
|
posix_madvise \
|
|
get_child_max sched_cpucount sched_cpualloc sched_cpufree
|
|
|
|
aux := init-posix environ
|
|
tests := tstgetopt testfnm runtests runptests \
|
|
tst-preadwrite tst-preadwrite64 test-vfork regexbug1 \
|
|
tst-getlogin tst-mmap tst-getaddrinfo tst-truncate \
|
|
tst-truncate64 tst-fork tst-fnmatch tst-regexloc tst-dir \
|
|
tst-chmod bug-regex1 bug-regex2 bug-regex3 bug-regex4 \
|
|
tst-gnuglob tst-regex bug-regex5 bug-regex6 bug-regex7 \
|
|
bug-regex8 bug-regex9 bug-regex10 bug-regex11 bug-regex12 \
|
|
bug-regex13 bug-regex14 bug-regex15 bug-regex16 \
|
|
bug-regex17 bug-regex18 bug-regex19 bug-regex20 \
|
|
bug-regex21 bug-regex22 bug-regex23 bug-regex24 \
|
|
bug-regex25 bug-regex26 bug-regex27 bug-regex28 \
|
|
bug-regex29 bug-regex30 bug-regex31 bug-regex32 \
|
|
bug-regex33 tst-nice tst-nanosleep tst-regex2 \
|
|
transbug tst-rxspencer tst-pcre tst-boost \
|
|
bug-ga1 tst-vfork1 tst-vfork2 tst-vfork3 tst-waitid \
|
|
tst-getaddrinfo2 bug-glob1 bug-glob2 bug-glob3 tst-sysconf \
|
|
tst-execvp1 tst-execvp2 tst-execlp1 tst-execlp2 \
|
|
tst-execv1 tst-execv2 tst-execl1 tst-execl2 \
|
|
tst-execve1 tst-execve2 tst-execle1 tst-execle2 \
|
|
tst-execvp3 tst-execvp4 tst-rfc3484 tst-rfc3484-2 \
|
|
tst-rfc3484-3 \
|
|
tst-getaddrinfo3 tst-fnmatch2 tst-cpucount tst-cpuset \
|
|
bug-getopt1 bug-getopt2 bug-getopt3 bug-getopt4 \
|
|
bug-getopt5 tst-getopt_long1 bug-regex34 bug-regex35 \
|
|
tst-pathconf tst-getaddrinfo4 tst-rxspencer-no-utf8
|
|
xtests := bug-ga2
|
|
ifeq (yes,$(build-shared))
|
|
test-srcs := globtest
|
|
tests += wordexp-test tst-exec tst-spawn
|
|
endif
|
|
tests-static = tst-exec-static tst-spawn-static
|
|
tests += $(tests-static)
|
|
others := getconf
|
|
install-bin := getconf
|
|
install-others-programs := $(inst_libexecdir)/getconf
|
|
|
|
before-compile := testcases.h ptestcases.h
|
|
|
|
# So they get cleaned up.
|
|
generated += $(addprefix wordexp-test-result, 1 2 3 4 5 6 7 8 9 10) \
|
|
annexc annexc.out wordexp-tst.out bug-regex2-mem \
|
|
bug-regex2.mtrace bug-regex14-mem bug-regex14.mtrace \
|
|
bug-regex21-mem bug-regex21.mtrace \
|
|
bug-regex31-mem bug-regex31.mtrace \
|
|
tst-rxspencer-no-utf8-mem tst-rxspencer-no-utf8.mtrace \
|
|
tst-getconf.out \
|
|
tst-pcre-mem tst-pcre.mtrace tst-boost-mem tst-boost.mtrace \
|
|
bug-ga2.mtrace bug-ga2-mem bug-glob2.mtrace bug-glob2-mem \
|
|
tst-vfork3-mem tst-vfork3.mtrace getconf.speclist \
|
|
tst-fnmatch-mem tst-fnmatch.mtrace
|
|
|
|
ifeq ($(run-built-tests),yes)
|
|
ifeq (yes,$(build-shared))
|
|
tests-special += $(objpfx)globtest.out $(objpfx)wordexp-tst.out
|
|
endif
|
|
endif
|
|
|
|
# Run a test on the header files we use.
|
|
# XXX Please note that for now we ignore the result of this test.
|
|
tests-special += $(objpfx)annexc.out
|
|
ifeq ($(run-built-tests),yes)
|
|
tests-special += $(objpfx)bug-regex2-mem $(objpfx)bug-regex14-mem \
|
|
$(objpfx)bug-regex21-mem $(objpfx)bug-regex31-mem \
|
|
$(objpfx)tst-rxspencer-no-utf8-mem $(objpfx)tst-pcre-mem \
|
|
$(objpfx)tst-boost-mem $(objpfx)tst-getconf.out \
|
|
$(objpfx)bug-glob2-mem $(objpfx)tst-vfork3-mem \
|
|
$(objpfx)tst-fnmatch-mem
|
|
xtests-special += $(objpfx)bug-ga2-mem
|
|
endif
|
|
|
|
include ../Rules
|
|
|
|
ifeq ($(run-built-tests),yes)
|
|
# globtest and wordexp-test currently only works with shared libraries
|
|
ifeq (yes,$(build-shared))
|
|
$(objpfx)globtest.out: globtest.sh $(objpfx)globtest
|
|
$(SHELL) $< $(common-objpfx) '$(test-via-rtld-prefix)' \
|
|
'$(test-program-prefix)' '$(test-wrapper-env)'; \
|
|
$(evaluate-test)
|
|
$(objpfx)wordexp-tst.out: wordexp-tst.sh $(objpfx)wordexp-test
|
|
$(SHELL) $< $(common-objpfx) '$(test-program-prefix)'; \
|
|
$(evaluate-test)
|
|
endif
|
|
endif
|
|
|
|
# If we will use the generic uname implementation, we must figure out what
|
|
# it will say by examining the system, and write the results in config-name.h.
|
|
uname.c: $(objpfx)config-name.h
|
|
$(objpfx)config-name.h: $(..)scripts/config-uname.sh $(common-objpfx)config.make
|
|
$(make-target-directory)
|
|
$< '$(config-os)' '$(config-release)' \
|
|
'$(config-machine)-$(config-vendor)' > $@.new
|
|
mv -f $@.new $@
|
|
|
|
CFLAGS-regex.c = -Wno-strict-prototypes
|
|
CFLAGS-getaddrinfo.c = -DRESOLVER -fexceptions
|
|
CFLAGS-pause.c = -fexceptions -fasynchronous-unwind-tables
|
|
CFLAGS-pread.c = -fexceptions -fasynchronous-unwind-tables
|
|
CFLAGS-pread64.c = -fexceptions -fasynchronous-unwind-tables
|
|
CFLAGS-pwrite.c = -fexceptions -fasynchronous-unwind-tables
|
|
CFLAGS-pwrite64.c = -fexceptions -fasynchronous-unwind-tables
|
|
CFLAGS-sleep.c = -fexceptions
|
|
CFLAGS-wait.c = -fexceptions -fasynchronous-unwind-tables
|
|
CFLAGS-waitid.c = -fexceptions -fasynchronous-unwind-tables
|
|
CFLAGS-waitpid.c = -fexceptions -fasynchronous-unwind-tables
|
|
CFLAGS-getopt.c = -fexceptions
|
|
CFLAGS-wordexp.c = -fexceptions
|
|
CFLAGS-wordexp.os = -fomit-frame-pointer
|
|
CFLAGS-sysconf.c = -fexceptions -DGETCONF_DIR='"$(libexecdir)/getconf"'
|
|
CFLAGS-pathconf.c = -fexceptions
|
|
CFLAGS-fpathconf.c = -fexceptions
|
|
CFLAGS-spawn.c = -fexceptions
|
|
CFLAGS-spawn.os = -fomit-frame-pointer
|
|
CFLAGS-spawnp.c = -fexceptions
|
|
CFLAGS-spawnp.os = -fomit-frame-pointer
|
|
CFLAGS-spawni.c = -fexceptions
|
|
CFLAGS-spawni.os = -fomit-frame-pointer
|
|
CFLAGS-pause.c = -fexceptions
|
|
CFLAGS-glob.c = $(uses-callbacks) -fexceptions
|
|
CFLAGS-glob64.c = $(uses-callbacks) -fexceptions
|
|
CFLAGS-getconf.c = -DGETCONF_DIR='"$(libexecdir)/getconf"'
|
|
CFLAGS-execve.os = -fomit-frame-pointer
|
|
CFLAGS-fexecve.os = -fomit-frame-pointer
|
|
CFLAGS-execv.os = -fomit-frame-pointer
|
|
CFLAGS-execle.os = -fomit-frame-pointer
|
|
CFLAGS-execl.os = -fomit-frame-pointer
|
|
CFLAGS-execvp.os = -fomit-frame-pointer
|
|
CFLAGS-execlp.os = -fomit-frame-pointer
|
|
|
|
tstgetopt-ARGS = -a -b -cfoobar --required foobar --optional=bazbug \
|
|
--none random --col --color --colour
|
|
|
|
tst-exec-ARGS = -- $(host-test-program-cmd)
|
|
tst-exec-static-ARGS = $(tst-exec-ARGS)
|
|
tst-spawn-ARGS = -- $(host-test-program-cmd)
|
|
tst-spawn-static-ARGS = $(tst-spawn-ARGS)
|
|
tst-dir-ARGS = `pwd` `cd $(common-objdir)/$(subdir); pwd` `cd $(common-objdir); pwd` $(objpfx)tst-dir
|
|
tst-chmod-ARGS = $(objdir)
|
|
tst-vfork3-ARGS = --test-dir=$(objpfx)
|
|
|
|
tst-fnmatch-ENV = LOCPATH=$(common-objpfx)localedata
|
|
tst-regexloc-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex1-ENV = LOCPATH=$(common-objpfx)localedata
|
|
tst-regex-ENV = LOCPATH=$(common-objpfx)localedata
|
|
tst-regex2-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex5-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex6-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex17-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex18-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex19-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex20-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex22-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex23-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex25-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex26-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex30-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex32-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex33-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex34-ENV = LOCPATH=$(common-objpfx)localedata
|
|
bug-regex35-ENV = LOCPATH=$(common-objpfx)localedata
|
|
tst-rxspencer-ARGS = --utf8 rxspencer/tests
|
|
tst-rxspencer-no-utf8-ARGS = rxspencer/tests
|
|
tst-rxspencer-ENV = LOCPATH=$(common-objpfx)localedata
|
|
tst-rxspencer-no-utf8-ENV = LOCPATH=$(common-objpfx)localedata
|
|
tst-pcre-ARGS = PCRE.tests
|
|
tst-boost-ARGS = BOOST.tests
|
|
bug-glob1-ARGS = "$(objpfx)"
|
|
tst-execvp3-ARGS = --test-dir=$(objpfx)
|
|
|
|
testcases.h: TESTS TESTS2C.sed
|
|
LC_ALL=C sed -f TESTS2C.sed < $< > $@T
|
|
mv -f $@T $@
|
|
|
|
ptestcases.h: PTESTS PTESTS2C.sed
|
|
LC_ALL=C sed -f PTESTS2C.sed < $< > $@T
|
|
mv -f $@T $@
|
|
|
|
test-xfail-annexc = yes
|
|
$(objpfx)annexc.out: $(objpfx)annexc
|
|
$(dir $<)$(notdir $<) '$(CC)' \
|
|
'$(patsubst %,-I../%,$(sorted-subdirs)) -I../include $(+sysdep-includes) $(sysincludes) -I..' > $@; \
|
|
$(evaluate-test)
|
|
|
|
annexc-CFLAGS = -O
|
|
$(objpfx)annexc: annexc.c
|
|
$(native-compile)
|
|
|
|
tst-fnmatch-ENV += MALLOC_TRACE=$(objpfx)tst-fnmatch.mtrace
|
|
|
|
$(objpfx)tst-fnmatch-mem: $(objpfx)tst-fnmatch.out
|
|
$(common-objpfx)malloc/mtrace $(objpfx)tst-fnmatch.mtrace > $@; \
|
|
$(evaluate-test)
|
|
|
|
bug-regex2-ENV = MALLOC_TRACE=$(objpfx)bug-regex2.mtrace
|
|
|
|
$(objpfx)bug-regex2-mem: $(objpfx)bug-regex2.out
|
|
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex2.mtrace > $@; \
|
|
$(evaluate-test)
|
|
|
|
bug-regex14-ENV = MALLOC_TRACE=$(objpfx)bug-regex14.mtrace
|
|
|
|
$(objpfx)bug-regex14-mem: $(objpfx)bug-regex14.out
|
|
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex14.mtrace > $@; \
|
|
$(evaluate-test)
|
|
|
|
bug-regex21-ENV = MALLOC_TRACE=$(objpfx)bug-regex21.mtrace
|
|
|
|
$(objpfx)bug-regex21-mem: $(objpfx)bug-regex21.out
|
|
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex21.mtrace > $@; \
|
|
$(evaluate-test)
|
|
|
|
bug-regex31-ENV = MALLOC_TRACE=$(objpfx)bug-regex31.mtrace
|
|
|
|
$(objpfx)bug-regex31-mem: $(objpfx)bug-regex31.out
|
|
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex31.mtrace > $@; \
|
|
$(evaluate-test)
|
|
|
|
tst-vfork3-ENV = MALLOC_TRACE=$(objpfx)tst-vfork3.mtrace
|
|
|
|
$(objpfx)tst-vfork3-mem: $(objpfx)tst-vfork3.out
|
|
$(common-objpfx)malloc/mtrace $(objpfx)tst-vfork3.mtrace > $@; \
|
|
$(evaluate-test)
|
|
|
|
# tst-rxspencer.mtrace is not generated, only
|
|
# tst-rxspencer-no-utf8.mtrace, since otherwise the file has almost
|
|
# 100M and takes very long time to process.
|
|
tst-rxspencer-no-utf8-ENV += MALLOC_TRACE=$(objpfx)tst-rxspencer-no-utf8.mtrace
|
|
$(objpfx)tst-rxspencer-no-utf8-mem: $(objpfx)tst-rxspencer-no-utf8.out
|
|
$(common-objpfx)malloc/mtrace $(objpfx)tst-rxspencer-no-utf8.mtrace \
|
|
> $@; \
|
|
$(evaluate-test)
|
|
|
|
tst-pcre-ENV = MALLOC_TRACE=$(objpfx)tst-pcre.mtrace
|
|
$(objpfx)tst-pcre-mem: $(objpfx)tst-pcre.out
|
|
$(common-objpfx)malloc/mtrace $(objpfx)tst-pcre.mtrace > $@; \
|
|
$(evaluate-test)
|
|
|
|
tst-boost-ENV = MALLOC_TRACE=$(objpfx)tst-boost.mtrace
|
|
$(objpfx)tst-boost-mem: $(objpfx)tst-boost.out
|
|
$(common-objpfx)malloc/mtrace $(objpfx)tst-boost.mtrace > $@; \
|
|
$(evaluate-test)
|
|
|
|
$(objpfx)tst-getconf.out: tst-getconf.sh $(objpfx)getconf
|
|
$(SHELL) $< $(common-objpfx) '$(built-program-cmd)'; \
|
|
$(evaluate-test)
|
|
|
|
$(objpfx)bug-ga2-mem: $(objpfx)bug-ga2.out
|
|
$(common-objpfx)malloc/mtrace $(objpfx)bug-ga2.mtrace > $@; \
|
|
$(evaluate-test)
|
|
|
|
bug-ga2-ENV = MALLOC_TRACE=$(objpfx)bug-ga2.mtrace
|
|
|
|
bug-glob2-ENV = MALLOC_TRACE=$(objpfx)bug-glob2.mtrace
|
|
|
|
$(objpfx)bug-glob2-mem: $(objpfx)bug-glob2.out
|
|
$(common-objpfx)malloc/mtrace $(objpfx)bug-glob2.mtrace > $@; \
|
|
$(evaluate-test)
|
|
|
|
$(inst_libexecdir)/getconf: $(inst_bindir)/getconf \
|
|
$(objpfx)getconf.speclist FORCE
|
|
$(addprefix $(..)./scripts/mkinstalldirs ,\
|
|
$(filter-out $(wildcard $@),$@))
|
|
while read spec; do \
|
|
ln -f $< $@/$$spec.new || $(INSTALL_PROGRAM) $< $@/$$spec.new; \
|
|
mv -f $@/$$spec.new $@/$$spec; \
|
|
done < $(objpfx)getconf.speclist
|
|
|
|
$(objpfx)getconf.speclist: getconf-speclist.c posix-envs.def
|
|
$(compile.c) -E -o - \
|
|
| sed -n -e '/@@@PRESENT_/s/@@@PRESENT_//p' > $@.new
|
|
mv -f $@.new $@
|
|
|
|
# This file is only actually needed at install time. But forcing it to
|
|
# be built both makes it available for eyeball inspection and avoids the
|
|
# surprise of things that look like compilation being done by 'make install'.
|
|
others: $(objpfx)getconf.speclist
|