mirror of
git://sourceware.org/git/glibc.git
synced 2024-12-15 04:20:28 +08:00
d6fe5e582d
This patch is an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and <https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>. Normal practice for software testsuites is that rather than terminating immediately when a test fails, they continue running and report at the end on how many tests passed or failed. The principle behind the glibc testsuite stopping on failure was probably that the expected state is no failures and so any failure indicates a problem such as miscompilation. In practice, while this is fairly close to true for native testing on x86_64 and x86 (kernel bugs and race conditions can still cause intermittent failures), it's less likely to be the case on other platforms, and so people testing glibc run the testsuite with "make -k" and then examine the logs to determine whether the failures are what they expect to fail on that platform, possibly with some automation for the comparison. This patch switches the glibc testsuite to the normal convention of not stopping on failure - unless you use stop-on-test-failure=y, in which case it behaves essentially as it did before (and does not generate overall test summaries on failure). Instead, the summary tests.sum may contain tests that FAILed. At the end of the test run, any FAIL or ERROR lines from tests.sum are printed, and then it exits with error status if there were any such lines. In addition, build failures will also cause the test run to stop - this has the justification that those *do* indicate serious problems that should be promptly fixed and aren't generally hard to fix (but apart from that, avoiding the build stopping on those failures seems harder). Note that unlike the previous patches in this series, this *does* require people with automation around testing glibc to change their processes - either to start using tests.sum / xtests.sum to track failures and compare them with expectations (with or without also using "make -k" and examining "make" logs to identify build failures), or else to use stop-on-test-failure=y and ignore the new tests.sum / xtests.sum mechanism. (If all you check is the exit status from "make check", no changes are needed unless you want to avoid test runs continuing after the first failure.) Tested x86_64. * scripts/evaluate-test.sh: Handle fourth argument to determine whether test run should stop on failure. * Makeconfig (stop-on-test-failure): New variable. (evaluate-test): Pass fourth argument to evaluate-test.sh based on $(stop-on-test-failure). * Makefile (tests): Give a summary of results from testing and exit with failure status if they include an ERROR or FAIL. (xtests): Likewise. * manual/install.texi (Configuring and compiling): Mention stop-on-test-failure=y. * INSTALL: Regenerated.
451 lines
15 KiB
Makefile
451 lines
15 KiB
Makefile
# Copyright (C) 1991-2014 Free Software Foundation, Inc.
|
||
# This file is part of the GNU C Library.
|
||
|
||
# The GNU C Library is free software; you can redistribute it and/or
|
||
# modify it under the terms of the GNU Lesser General Public
|
||
# License as published by the Free Software Foundation; either
|
||
# version 2.1 of the License, or (at your option) any later version.
|
||
|
||
# The GNU C Library is distributed in the hope that it will be useful,
|
||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||
# Lesser General Public License for more details.
|
||
|
||
# You should have received a copy of the GNU Lesser General Public
|
||
# License along with the GNU C Library; if not, see
|
||
# <http://www.gnu.org/licenses/>.
|
||
|
||
#
|
||
# Master Makefile for the GNU C library
|
||
#
|
||
ifneq (,)
|
||
This makefile requires GNU Make.
|
||
endif
|
||
|
||
include Makeconfig
|
||
|
||
|
||
# This is the default target; it makes everything except the tests.
|
||
.PHONY: all
|
||
all: lib others
|
||
|
||
ifneq ($(AUTOCONF),no)
|
||
|
||
define autoconf-it
|
||
@-rm -f $@.new
|
||
$(AUTOCONF) $(ACFLAGS) $< > $@.new
|
||
chmod a-w$(patsubst %,$(comma)a+x,$(filter .,$(@D))) $@.new
|
||
mv -f $@.new $@
|
||
endef
|
||
|
||
configure: configure.ac aclocal.m4; $(autoconf-it)
|
||
%/configure: %/configure.ac aclocal.m4; $(autoconf-it)
|
||
%/preconfigure: %/preconfigure.ac aclocal.m4; $(autoconf-it)
|
||
|
||
endif # $(AUTOCONF) = no
|
||
|
||
|
||
# We don't want to run anything here in parallel.
|
||
.NOTPARALLEL:
|
||
|
||
# These are the targets that are made by making them in each subdirectory.
|
||
+subdir_targets := subdir_lib objects objs others subdir_mostlyclean \
|
||
subdir_clean subdir_distclean subdir_realclean \
|
||
tests xtests \
|
||
subdir_update-abi subdir_check-abi \
|
||
subdir_echo-headers \
|
||
subdir_install \
|
||
subdir_objs subdir_stubs subdir_testclean \
|
||
$(addprefix install-, no-libc.a bin lib data headers others)
|
||
|
||
headers := limits.h values.h features.h gnu-versions.h bits/libc-lock.h \
|
||
bits/xopen_lim.h gnu/libc-version.h stdc-predef.h
|
||
|
||
echo-headers: subdir_echo-headers
|
||
|
||
# The headers are in the include directory.
|
||
subdir-dirs = include
|
||
vpath %.h $(subdir-dirs)
|
||
|
||
# What to install.
|
||
install-others = $(inst_includedir)/gnu/stubs.h
|
||
install-bin-script =
|
||
|
||
ifeq (yes,$(build-shared))
|
||
headers += gnu/lib-names.h
|
||
endif
|
||
|
||
include Makerules
|
||
|
||
ifeq ($(build-programs),yes)
|
||
others: $(addprefix $(objpfx),$(install-bin-script))
|
||
endif
|
||
|
||
# Install from subdirectories too.
|
||
install: subdir_install
|
||
|
||
# Explicit dependency so that `make install-headers' works
|
||
install-headers: install-headers-nosubdir
|
||
|
||
# Make sure that the dynamic linker is installed before libc.
|
||
$(inst_slibdir)/libc-$(version).so: elf/ldso_install
|
||
|
||
.PHONY: elf/ldso_install
|
||
elf/ldso_install:
|
||
$(MAKE) -C $(@D) $(@F)
|
||
|
||
# Create links for shared libraries using the `ldconfig' program if possible.
|
||
# Ignore the error if we cannot update /etc/ld.so.cache.
|
||
ifeq (no,$(cross-compiling))
|
||
ifeq (yes,$(build-shared))
|
||
install: install-symbolic-link
|
||
.PHONY: install-symbolic-link
|
||
install-symbolic-link: subdir_install
|
||
$(symbolic-link-prog) $(symbolic-link-list)
|
||
rm -f $(symbolic-link-list)
|
||
|
||
install:
|
||
-test ! -x $(common-objpfx)elf/ldconfig || LC_ALL=C LANGUAGE=C \
|
||
$(common-objpfx)elf/ldconfig $(addprefix -r ,$(install_root)) \
|
||
$(slibdir) $(libdir)
|
||
ifneq (no,$(PERL))
|
||
ifeq (/usr,$(prefix))
|
||
ifeq (,$(install_root))
|
||
LD_SO=$(ld.so-version) CC="$(CC)" $(PERL) scripts/test-installation.pl $(common-objpfx)
|
||
endif
|
||
endif
|
||
endif
|
||
endif
|
||
endif
|
||
|
||
# Build subdirectory lib objects.
|
||
lib-noranlib: subdir_lib
|
||
|
||
ifeq (yes,$(build-shared))
|
||
# Build the shared object from the PIC object library.
|
||
lib: $(common-objpfx)libc.so $(common-objpfx)linkobj/libc.so
|
||
endif # $(build-shared)
|
||
|
||
|
||
# This is a handy script for running any dynamically linked program against
|
||
# the current libc build for testing.
|
||
$(common-objpfx)testrun.sh: $(common-objpfx)config.make \
|
||
$(..)Makeconfig $(..)Makefile
|
||
(echo '#!/bin/sh'; \
|
||
echo 'builddir=`dirname "$$0"`'; \
|
||
echo 'GCONV_PATH="$${builddir}/iconvdata" \'; \
|
||
echo 'exec $(subst $(common-objdir),"$${builddir}",\
|
||
$(test-program-prefix)) $${1+"$$@"}'; \
|
||
) > $@T
|
||
chmod a+x $@T
|
||
mv -f $@T $@
|
||
postclean-generated += testrun.sh
|
||
|
||
others: $(common-objpfx)testrun.sh
|
||
|
||
# Makerules creates a file `stubs' in each subdirectory, which
|
||
# contains `#define __stub_FUNCTION' for each function defined in that
|
||
# directory which is a stub.
|
||
# Here we paste all of these together into <gnu/stubs.h>.
|
||
|
||
subdir-stubs := $(foreach dir,$(subdirs),$(common-objpfx)$(dir)/stubs)
|
||
|
||
ifndef abi-variants
|
||
installed-stubs = $(inst_includedir)/gnu/stubs.h
|
||
else
|
||
installed-stubs = $(inst_includedir)/gnu/stubs-$(default-abi).h
|
||
|
||
$(inst_includedir)/gnu/stubs.h: $(+force)
|
||
$(make-target-directory)
|
||
{ \
|
||
echo '/* This file is automatically generated.';\
|
||
echo " This file selects the right generated file of \`__stub_FUNCTION' macros";\
|
||
echo ' based on the architecture being compiled for. */'; \
|
||
echo ''; \
|
||
$(foreach h,$(abi-includes), echo '#include <$(h)>';) \
|
||
echo ''; \
|
||
$(foreach v,$(abi-variants),\
|
||
$(if $(abi-$(v)-condition),\
|
||
echo '#if $(abi-$(v)-condition)'; \
|
||
echo '# include <gnu/stubs-$(v).h>'); \
|
||
$(if $(abi-$(v)-condition),echo '#endif';) \
|
||
rm -f $(@:.d=.h).new$(v); \
|
||
) \
|
||
} > $(@:.d=.h).new
|
||
mv -f $(@:.d=.h).new $(@:.d=.h)
|
||
|
||
install-others-nosubdir: $(installed-stubs)
|
||
endif
|
||
|
||
|
||
# Since stubs.h is never needed when building the library, we simplify the
|
||
# hairy installation process by producing it in place only as the last part
|
||
# of the top-level `make install'. It depends on subdir_install, which
|
||
# iterates over all the subdirs; subdir_install in each subdir depends on
|
||
# the subdir's stubs file. Having more direct dependencies would result in
|
||
# extra iterations over the list for subdirs and many recursive makes.
|
||
$(installed-stubs): include/stubs-prologue.h subdir_install
|
||
$(make-target-directory)
|
||
@rm -f $(objpfx)stubs.h
|
||
(sed '/^@/d' $<; LC_ALL=C sort $(subdir-stubs)) > $(objpfx)stubs.h
|
||
if test -r $@ && cmp -s $(objpfx)stubs.h $@; \
|
||
then echo 'stubs.h unchanged'; \
|
||
else $(INSTALL_DATA) $(objpfx)stubs.h $@; fi
|
||
rm -f $(objpfx)stubs.h
|
||
|
||
# This makes the Info or DVI file of the documentation from the Texinfo source.
|
||
.PHONY: info dvi pdf html
|
||
info dvi pdf html:
|
||
$(MAKE) $(PARALLELMFLAGS) -C manual $@
|
||
|
||
# This makes all the subdirectory targets.
|
||
|
||
# For each target, make it depend on DIR/target for each subdirectory DIR.
|
||
$(+subdir_targets): %: $(addsuffix /%,$(subdirs))
|
||
|
||
# Compute a list of all those targets.
|
||
all-subdirs-targets := $(foreach dir,$(subdirs),\
|
||
$(addprefix $(dir)/,$(+subdir_targets)))
|
||
|
||
# The action for each of those is to cd into the directory and make the
|
||
# target there.
|
||
$(all-subdirs-targets):
|
||
$(MAKE) $(PARALLELMFLAGS) $(subdir-target-args) $(@F)
|
||
|
||
define subdir-target-args
|
||
subdir=$(@D)$(if $($(@D)-srcdir),\
|
||
-C $($(@D)-srcdir) ..=`pwd`/,\
|
||
-C $(@D) ..=../)
|
||
endef
|
||
|
||
.PHONY: $(+subdir_targets) $(all-subdirs-targets)
|
||
|
||
# Targets to clean things up to various degrees.
|
||
|
||
.PHONY: clean realclean distclean distclean-1 parent-clean parent-mostlyclean \
|
||
tests-clean
|
||
|
||
# Subroutines of all cleaning targets.
|
||
parent-mostlyclean: common-mostlyclean # common-mostlyclean is in Makerules.
|
||
-rm -f $(foreach o,$(object-suffixes-for-libc),\
|
||
$(common-objpfx)$(patsubst %,$(libtype$o),c)) \
|
||
$(addprefix $(objpfx),$(install-lib))
|
||
parent-clean: parent-mostlyclean common-clean
|
||
|
||
postclean = $(addprefix $(common-objpfx),$(postclean-generated)) \
|
||
$(addprefix $(objpfx),sysd-dirs sysd-rules) \
|
||
$(addprefix $(objpfx),sysd-sorted soversions.mk soversions.i)
|
||
|
||
clean: parent-clean
|
||
# This is done this way rather than having `subdir_clean' be a
|
||
# dependency of this target so that libc.a will be removed before the
|
||
# subdirectories are dealt with and so they won't try to remove object
|
||
# files from it when it's going to be removed anyway.
|
||
@$(MAKE) subdir_clean no_deps=t
|
||
-rm -f $(postclean)
|
||
mostlyclean: parent-mostlyclean
|
||
@$(MAKE) subdir_mostlyclean no_deps=t
|
||
-rm -f $(postclean)
|
||
|
||
tests-clean:
|
||
@$(MAKE) subdir_testclean no_deps=t
|
||
|
||
tests-special += $(objpfx)c++-types-check.out $(objpfx)check-local-headers.out
|
||
ifneq ($(CXX),no)
|
||
|
||
vpath c++-types.data $(+sysdep_dirs)
|
||
|
||
$(objpfx)c++-types-check.out: c++-types.data scripts/check-c++-types.sh
|
||
scripts/check-c++-types.sh $< $(CXX) $(filter-out -std=gnu99 -Wstrict-prototypes,$(CFLAGS)) $(CPPFLAGS) > $@; \
|
||
$(evaluate-test)
|
||
endif
|
||
|
||
$(objpfx)check-local-headers.out: scripts/check-local-headers.sh
|
||
AWK='$(AWK)' scripts/check-local-headers.sh \
|
||
"$(includedir)" "$(objpfx)" > $@; \
|
||
$(evaluate-test)
|
||
|
||
ifneq ($(PERL),no)
|
||
installed-headers = argp/argp.h assert/assert.h catgets/nl_types.h \
|
||
crypt/crypt.h ctype/ctype.h debug/execinfo.h \
|
||
dirent/dirent.h dlfcn/dlfcn.h elf/elf.h elf/link.h \
|
||
gmon/sys/gmon.h gmon/sys/gmon_out.h gmon/sys/profil.h \
|
||
grp/grp.h gshadow/gshadow.h iconv/iconv.h iconv/gconv.h \
|
||
$(wildcard inet/netinet/*.h) \
|
||
$(wildcard inet/arpa/*.h inet/protocols/*.h) \
|
||
inet/aliases.h inet/ifaddrs.h inet/netinet/ip6.h \
|
||
inet/netinet/icmp6.h intl/libintl.h io/sys/stat.h \
|
||
io/sys/statfs.h io/sys/vfs.h io/sys/statvfs.h \
|
||
io/fcntl.h io/sys/fcntl.h io/poll.h io/sys/poll.h \
|
||
io/utime.h io/ftw.h io/fts.h io/sys/sendfile.h \
|
||
libio/stdio.h libio/libio.h locale/locale.h \
|
||
locale/langinfo.h locale/xlocale.h login/utmp.h \
|
||
login/lastlog.h login/pty.h malloc/malloc.h \
|
||
malloc/obstack.h malloc/mcheck.h math/math.h \
|
||
math/complex.h math/fenv.h math/tgmath.h misc/sys/uio.h \
|
||
$(wildcard nis/rpcsvc/*.h) nptl_db/thread_db.h \
|
||
nptl/sysdeps/pthread/pthread.h nptl/semaphore.h \
|
||
nss/nss.h posix/sys/utsname.h posix/sys/times.h \
|
||
posix/sys/wait.h posix/sys/types.h posix/unistd.h \
|
||
posix/glob.h posix/regex.h posix/wordexp.h posix/fnmatch.h\
|
||
posix/getopt.h posix/tar.h posix/sys/unistd.h \
|
||
posix/sched.h posix/re_comp.h posix/wait.h \
|
||
posix/cpio.h posix/spawn.h pwd/pwd.h resolv/resolv.h \
|
||
resolv/netdb.h $(wildcard resolv/arpa/*.h) \
|
||
resource/sys/resource.h resource/sys/vlimit.h \
|
||
resource/sys/vtimes.h resource/ulimit.h rt/aio.h \
|
||
rt/mqueue.h setjmp/setjmp.h shadow/shadow.h \
|
||
signal/signal.h signal/sys/signal.h socket/sys/socket.h \
|
||
socket/sys/un.h stdio-common/printf.h \
|
||
stdio-common/stdio_ext.h stdlib/stdlib.h stdlib/alloca.h \
|
||
stdlib/monetary.h stdlib/fmtmsg.h stdlib/ucontext.h \
|
||
sysdeps/generic/inttypes.h sysdeps/generic/stdint.h \
|
||
stdlib/errno.h stdlib/sys/errno.h string/string.h \
|
||
string/strings.h string/memory.h string/endian.h \
|
||
string/argz.h string/envz.h string/byteswap.h \
|
||
$(wildcard sunrpc/rpc/*.h sunrpc/rpcsvc/*.h) \
|
||
sysvipc/sys/ipc.h sysvipc/sys/msg.h sysvipc/sys/sem.h \
|
||
sysvipc/sys/shm.h termios/termios.h \
|
||
termios/sys/termios.h termios/sys/ttychars.h time/time.h \
|
||
time/sys/time.h time/sys/timeb.h wcsmbs/wchar.h \
|
||
wctype/wctype.h
|
||
|
||
tests-special += $(objpfx)begin-end-check.out
|
||
$(objpfx)begin-end-check.out: scripts/begin-end-check.pl
|
||
$(PERL) scripts/begin-end-check.pl $(installed-headers) > $@; \
|
||
$(evaluate-test)
|
||
endif
|
||
|
||
tests-special-notdir = $(patsubst $(objpfx)%, %, $(tests-special))
|
||
tests: $(tests-special)
|
||
$(..)scripts/merge-test-results.sh -s $(objpfx) "" \
|
||
$(sort $(tests-special-notdir:.out=)) \
|
||
> $(objpfx)subdir-tests.sum
|
||
$(..)scripts/merge-test-results.sh -t $(objpfx) subdir-tests.sum \
|
||
$(sort $(subdirs) .) \
|
||
> $(objpfx)tests.sum
|
||
@grep '^ERROR:' $(objpfx)tests.sum || true
|
||
@grep '^FAIL:' $(objpfx)tests.sum || true
|
||
@echo "Summary of test results:"
|
||
@sed 's/:.*//' < $(objpfx)tests.sum | sort | uniq -c
|
||
@if grep -q '^ERROR:' $(objpfx)tests.sum; then exit 1; fi
|
||
@if grep -q '^FAIL:' $(objpfx)tests.sum; then exit 1; fi
|
||
xtests:
|
||
$(..)scripts/merge-test-results.sh -t $(objpfx) subdir-xtests.sum \
|
||
$(sort $(subdirs)) \
|
||
> $(objpfx)xtests.sum
|
||
@grep '^ERROR:' $(objpfx)xtests.sum || true
|
||
@grep '^FAIL:' $(objpfx)xtests.sum || true
|
||
@echo "Summary of test results for extra tests:"
|
||
@sed 's/:.*//' < $(objpfx)xtests.sum | sort | uniq -c
|
||
@if grep -q '^ERROR:' $(objpfx)xtests.sum; then exit 1; fi
|
||
@if grep -q '^FAIL:' $(objpfx)xtests.sum; then exit 1; fi
|
||
|
||
# The realclean target is just like distclean for the parent, but we want
|
||
# the subdirs to know the difference in case they care.
|
||
realclean distclean: parent-clean
|
||
# This is done this way rather than having `subdir_distclean' be a
|
||
# dependency of this target so that libc.a will be removed before the
|
||
# subdirectories are dealt with and so they won't try to remove object
|
||
# files from it when it's going to be removed anyway.
|
||
@$(MAKE) distclean-1 no_deps=t distclean-1=$@ avoid-generated=yes \
|
||
sysdep-subdirs="$(sysdep-subdirs)"
|
||
-rm -f $(postclean)
|
||
|
||
# Subroutine of distclean and realclean.
|
||
distclean-1: subdir_$(distclean-1)
|
||
-rm -f $(config-generated)
|
||
-rm -f $(addprefix $(objpfx),config.status config.cache config.log)
|
||
-rm -f $(addprefix $(objpfx),config.make config-name.h config.h)
|
||
ifdef objdir
|
||
-rm -f $(objpfx)Makefile
|
||
endif
|
||
-rm -f $(sysdep-$(distclean-1))
|
||
|
||
# Make the TAGS file for Emacs users.
|
||
|
||
.PHONY: TAGS
|
||
TAGS:
|
||
scripts/list-sources.sh | sed -n -e '/Makefile/p' \
|
||
$(foreach S,[chsSyl] cxx sh bash pl,\
|
||
$(subst .,\.,-e '/.$S\(.in\)*$$/p')) \
|
||
| $(ETAGS) -o $@ -
|
||
|
||
# Make the distribution tarfile.
|
||
.PHONY: dist dist-prepare
|
||
|
||
generated := $(generated) stubs.h
|
||
|
||
files-for-dist := README INSTALL configure ChangeLog NEWS
|
||
|
||
# Regenerate stuff, then error if these things are not committed yet.
|
||
dist-prepare: $(files-for-dist)
|
||
conf=`find sysdeps $(addsuffix /sysdeps,$(sysdeps-add-ons)) \
|
||
-name configure`; \
|
||
$(MAKE) $$conf && \
|
||
git diff --stat HEAD -- $^ $$conf \
|
||
| $(AWK) '{ print; rc=1 } END { exit rc }'
|
||
|
||
%.tar: FORCE
|
||
git archive --prefix=$*/ $* > $@.new
|
||
mv -f $@.new $@
|
||
|
||
# Do `make dist dist-version=X.Y.Z' to make tar files of an older version.
|
||
|
||
ifneq (,$(strip $(dist-version)))
|
||
dist: $(foreach Z,.bz2 .gz .xz,$(dist-version).tar$Z)
|
||
md5sum $^
|
||
else
|
||
dist: dist-prepare
|
||
@if v=`git describe`; then \
|
||
echo Distribution version $$v; \
|
||
$(MAKE) dist dist-version=$$v; \
|
||
else \
|
||
false; \
|
||
fi
|
||
endif
|
||
|
||
INSTALL: manual/install-plain.texi manual/macros.texi \
|
||
$(common-objpfx)manual/pkgvers.texi manual/install.texi
|
||
makeinfo --no-validate --plaintext --no-number-sections \
|
||
-I$(common-objpfx)manual $< -o $@-tmp
|
||
$(AWK) 'NF == 0 { ++n; next } \
|
||
NF != 0 { while (n-- > 0) print ""; n = 0; print }' \
|
||
< $@-tmp > $@-tmp2
|
||
rm -f $@-tmp
|
||
-chmod a-w $@-tmp2
|
||
mv -f $@-tmp2 $@
|
||
$(common-objpfx)manual/%: FORCE
|
||
$(MAKE) $(PARALLELMFLAGS) -C manual $@
|
||
FORCE:
|
||
|
||
iconvdata/% localedata/% po/%: FORCE
|
||
$(MAKE) $(PARALLELMFLAGS) -C $(@D) $(@F)
|
||
|
||
# glibc 2.0 contains some header files which aren't used with glibc 2.1
|
||
# anymore.
|
||
# These rules should remove those headers
|
||
ifeq (,$(install_root))
|
||
ifeq ($(old-glibc-headers),yes)
|
||
install: remove-old-headers
|
||
endif
|
||
endif
|
||
|
||
headers2_0 := __math.h bytesex.h confname.h direntry.h elfclass.h \
|
||
errnos.h fcntlbits.h huge_val.h ioctl-types.h \
|
||
ioctls.h iovec.h jmp_buf.h libc-lock.h local_lim.h \
|
||
mathcalls.h mpool.h nan.h ndbm.h posix1_lim.h \
|
||
posix2_lim.h posix_opt.h resourcebits.h schedbits.h \
|
||
selectbits.h semaphorebits.h sigaction.h sigcontext.h \
|
||
signum.h sigset.h sockaddrcom.h socketbits.h stab.def \
|
||
statbuf.h statfsbuf.h stdio-lock.h stdio_lim.h \
|
||
syscall-list.h termbits.h timebits.h ustatbits.h \
|
||
utmpbits.h utsnamelen.h waitflags.h waitstatus.h \
|
||
xopen_lim.h gnu/types.h sys/ipc_buf.h \
|
||
sys/kernel_termios.h sys/msq_buf.h sys/sem_buf.h \
|
||
sys/shm_buf.h sys/socketcall.h sigstack.h
|
||
|
||
.PHONY: remove-old-headers
|
||
remove-old-headers:
|
||
rm -f $(addprefix $(inst_includedir)/, $(headers2_0))
|