mirror of
git://sourceware.org/git/glibc.git
synced 2024-11-27 03:41:23 +08:00
c66452515d
Thu Nov 28 03:11:11 1996 Ulrich Drepper <drepper@cygnus.com> * libio/fileops.c: Update from latest libg++. * sysdeps/unix/sysv/linux/init-first.c: Reformat copyright. * sysdeps/stub/libc-lock.h: Add __libc_lock_init_recursive. * libio/genops.c (_IO_init): Use __libc_lock_init_recursive instead of __libc_lock_init for streams. Reported by a sun <asun@zoology.washington.edu>. * sysdepsunix/sysv/linux/i386/brk.c: Reformat copyright. * sysdeps/generic/errno-loc.c: New file. Generic definition of __errno_location function. * sysdeps/unix/sysv/linux/i386/sysdep.S: Remove definition of __errno_location. * sysdeps/unix/sysv/linux/m68k/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/Makefile [$(subdir)=csu]: Add errno-loc to sysdep-routines. * sysdeps/unix/sysv/linux/configure: Add test for linuxthreads and crypt add-on and warn if not available. Wed Nov 27 23:09:37 1996 Ulrich Drepper <drepper@cygnus.com> * po/ko.po: Update from Bang Jun-Young <bangjy@nownuri.nowcom.co.kr>. * sysdeps/unix/sysv/linux/syscalls.list: Remove _llseek. * sysdeps/unix/sysv/linux/Makefile [$(subdir)=misc] (routines): Add llseek. * sysdeps/unix/sysv/linux/llseek.c: New file. Uses syscall. * sysdeps/unix/sysv/linux/i386/syscalls.list: Add __sys_llseek. * sysdeps/unix/sysv/linux/m68k/syscalls.list: Add __sys_llseek. Reported by HJ Lu <hjl@gnu.ai.mit.edu>. * sysdeps/unix/sysv/linux/alpha/syscalls.list: Add llseek. * sysdeps/unix/sysv/linux/alpha/llseek.S: Remove. Generic syscall is enough. Patch by Richard Henderson <rth@tamu.edu>. * sysdeps/unix/sysv/linux/alpha/sys/io.h: Add prototypes for pciconfig_read and pciconfig_write. * sysdeps/unix/sysv/linux/alpha/syscalls.list: Add new syscalls pciconfig_read and pciconfig_write. * login/getutent_r.c: Fix several bugs in last change.
2677 lines
77 KiB
Plaintext
2677 lines
77 KiB
Plaintext
# GNU libc의 한국어 메시지
|
|
# Copyright (C) 1996 Free Software Foundation, Inc.
|
|
# Bang Jun-Young <bangjy@nownuri.nowcom.co.kr>, 1996.
|
|
#
|
|
msgid ""
|
|
msgstr ""
|
|
"Project-Id-Version: GNU libc 1.96\n"
|
|
"POT-Creation-Date: 1996-10-17 03:22+0200\n"
|
|
"PO-Revision-Date: 1996-11-23 19:25+0900\n"
|
|
"Last-Translator: Bang Jun-Young <bangjy@nownuri.nowcom.co.kr>\n"
|
|
"Language-Team: Korean <ko@li.org>\n"
|
|
"MIME-Version: 1.0\n"
|
|
"Content-Type: text/plain; charset=EUC-KR\n"
|
|
"Content-Transfer-Encoding: 8-bit\n"
|
|
|
|
#: sunrpc/rpcinfo.c:612
|
|
msgid " rpcinfo -b prognum versnum\n"
|
|
msgstr " rpcinfo -b 프로그램번호 버전번호\n"
|
|
|
|
#: sunrpc/rpcinfo.c:613
|
|
msgid " rpcinfo -d prognum versnum\n"
|
|
msgstr " rpcinfo -d 프로그램번호 버전번호\n"
|
|
|
|
#: sunrpc/rpcinfo.c:611
|
|
msgid " rpcinfo -p [ host ]\n"
|
|
msgstr " rpcinfo -p [ 호스트 ]\n"
|
|
|
|
#: sunrpc/rpcinfo.c:610
|
|
msgid " rpcinfo [ -n portnum ] -t host prognum [ versnum ]\n"
|
|
msgstr " rpcinfo [ -n 포트번호 ] -t 호스트 프로그램번호 [ 버전번호 ]\n"
|
|
|
|
#: sunrpc/rpcinfo.c:517
|
|
msgid " program vers proto port\n"
|
|
msgstr " 프로그램 버전 원형 포트\n"
|
|
|
|
#: time/zic.c:424
|
|
#, c-format
|
|
msgid " (rule from \"%s\", line %d)"
|
|
msgstr " (\"%s\"에 있는 규칙, %d 행)"
|
|
|
|
#: locale/programs/ld-collate.c:360 locale/programs/ld-ctype.c:1234
|
|
msgid " done\n"
|
|
msgstr " 완료\n"
|
|
|
|
#: time/zic.c:421
|
|
#, c-format
|
|
msgid "\"%s\", line %d: %s"
|
|
msgstr "\"%s\", 행 %d: %s"
|
|
|
|
#: time/zic.c:945
|
|
#, c-format
|
|
msgid "\"Zone %s\" line and -l option are mutually exclusive"
|
|
msgstr "\"지역 %s\" 행과 -l 옵션은 서로 배타적입니다"
|
|
|
|
#: time/zic.c:953
|
|
#, c-format
|
|
msgid "\"Zone %s\" line and -p option are mutually exclusive"
|
|
msgstr "\"지역 %s\" 행과 -p 옵션은 서로 배타적입니다"
|
|
|
|
#: time/zic.c:758
|
|
#, c-format
|
|
msgid "%s in ruleless zone"
|
|
msgstr "규칙없는 지역에 %s가 있음"
|
|
|
|
#: assert/assert.c:48
|
|
#, c-format
|
|
msgid "%s%s%s:%u: %s%sAssertion `%s' failed.\n"
|
|
msgstr ""
|
|
|
|
#: assert/assert-perr.c:46
|
|
#, c-format
|
|
msgid "%s%s%s:%u: %s%sUnexpected error: %s.\n"
|
|
msgstr "%s%s%s:%u: %s%s예기치 못한 오류: %s.\n"
|
|
|
|
#: stdio-common/psignal.c:48
|
|
#, c-format
|
|
msgid "%s%sUnknown signal %d\n"
|
|
msgstr "%s%s알 수 없는 신호 %d\n"
|
|
|
|
#: time/zic.c:2139
|
|
#, c-format
|
|
msgid "%s: %d did not sign extend correctly\n"
|
|
msgstr "%s: %d는 부호 확장이 제대로 되지 않았습니다\n"
|
|
|
|
#: locale/programs/charmap.c:176
|
|
#, c-format
|
|
msgid "%s: <mb_cur_max> must be greater than <mb_cur_min>\n"
|
|
msgstr "%s: <mb_cur_max>는 <mb_cur_min>보다 커야 합니다\n"
|
|
|
|
#: time/zic.c:1430
|
|
#, c-format
|
|
msgid "%s: Can't create %s: %s\n"
|
|
msgstr "%s: %s를 만들 수 없습니다: %s\n"
|
|
|
|
#: time/zic.c:2118
|
|
#, c-format
|
|
msgid "%s: Can't create directory %s: %s\n"
|
|
msgstr "%s: %s 디렉토리를 만들 수 없습니다: %s\n"
|
|
|
|
#: time/zic.c:612
|
|
#, c-format
|
|
msgid "%s: Can't link from %s to %s: %s\n"
|
|
msgstr "%s: %s를 %s로 연결할 수 없습니다: %s\n"
|
|
|
|
#: time/zic.c:783
|
|
#, c-format
|
|
msgid "%s: Can't open %s: %s\n"
|
|
msgstr "%s: %s를 열 수 없습니다: %s\n"
|
|
|
|
#: time/zic.c:851
|
|
#, c-format
|
|
msgid "%s: Error closing %s: %s\n"
|
|
msgstr "%s: %s를 닫는 도중 오류 발생: %s\n"
|
|
|
|
#: time/zic.c:845
|
|
#, c-format
|
|
msgid "%s: Error reading %s\n"
|
|
msgstr "%s: %s를 읽는 도중 오류 발생\n"
|
|
|
|
#: time/zic.c:1494
|
|
#, c-format
|
|
msgid "%s: Error writing %s\n"
|
|
msgstr "%s: %s를 쓰는 도중 오류 발생\n"
|
|
|
|
#: time/zdump.c:258
|
|
#, c-format
|
|
msgid "%s: Error writing standard output "
|
|
msgstr "%s: 표준 출력에 쓰는 도중 오류 발생 "
|
|
|
|
#: time/zic.c:830
|
|
#, c-format
|
|
msgid "%s: Leap line in non leap seconds file %s\n"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:362
|
|
#, c-format
|
|
msgid "%s: Memory exhausted: %s\n"
|
|
msgstr "%s: 메모리가 바닥남: %s\n"
|
|
|
|
#: time/zic.c:527
|
|
#, c-format
|
|
msgid "%s: More than one -L option specified\n"
|
|
msgstr "%s: 하나 이상의 -L 옵션이 지정되었음\n"
|
|
|
|
#: time/zic.c:487
|
|
#, c-format
|
|
msgid "%s: More than one -d option specified\n"
|
|
msgstr "%s: 하나 이상의 -d 옵션이 지정되었음\n"
|
|
|
|
#: time/zic.c:497
|
|
#, c-format
|
|
msgid "%s: More than one -l option specified\n"
|
|
msgstr "%s: 하나 이상의 -l 옵션이 지정되었음\n"
|
|
|
|
#: time/zic.c:507
|
|
#, c-format
|
|
msgid "%s: More than one -p option specified\n"
|
|
msgstr "%s: 하나 이상의 -p 옵션이 지정되었음\n"
|
|
|
|
#: time/zic.c:517
|
|
#, c-format
|
|
msgid "%s: More than one -y option specified\n"
|
|
msgstr "%s: 하나 이상의 -y 옵션이 지정되었음\n"
|
|
|
|
#: time/zic.c:1845
|
|
#, c-format
|
|
msgid "%s: command was '%s', result was %d\n"
|
|
msgstr "%s: 명령은 '%s'였고, 결과는 %d였습니다\n"
|
|
|
|
#: locale/programs/charmap.c:593 locale/programs/locfile.c:878
|
|
#, c-format
|
|
msgid "%s: error in state machine"
|
|
msgstr ""
|
|
|
|
#: posix/getopt.c:687
|
|
#, c-format
|
|
msgid "%s: illegal option -- %c\n"
|
|
msgstr "%s: 잘못된 옵션 -- %c\n"
|
|
|
|
#: posix/getopt.c:690
|
|
#, c-format
|
|
msgid "%s: invalid option -- %c\n"
|
|
msgstr "%s: 부적절한 옵션 -- %c\n"
|
|
|
|
#: posix/getopt.c:611
|
|
#, c-format
|
|
msgid "%s: option `%c%s' doesn't allow an argument\n"
|
|
msgstr "%s: `%c%s' 옵션은 인수를 허용하지 않습니다\n"
|
|
|
|
#: posix/getopt.c:582
|
|
#, c-format
|
|
msgid "%s: option `%s' is ambiguous\n"
|
|
msgstr "%s: `%s'는 모호한 옵션입니다\n"
|
|
|
|
#: posix/getopt.c:628 posix/getopt.c:801
|
|
#, c-format
|
|
msgid "%s: option `%s' requires an argument\n"
|
|
msgstr "%s: `%s' 옵션은 인수가 필요합니다\n"
|
|
|
|
#: posix/getopt.c:606
|
|
#, c-format
|
|
msgid "%s: option `--%s' doesn't allow an argument\n"
|
|
msgstr "%s: `--%s' 옵션은 인수를 허용하지 않습니다\n"
|
|
|
|
#: posix/getopt.c:786
|
|
#, c-format
|
|
msgid "%s: option `-W %s' doesn't allow an argument\n"
|
|
msgstr "%s: `-W %s' 옵션은 인수를 허용하지 않습니다\n"
|
|
|
|
#: posix/getopt.c:767
|
|
#, c-format
|
|
msgid "%s: option `-W %s' is ambiguous\n"
|
|
msgstr "%s: `-W %s'는 모호한 옵션입니다\n"
|
|
|
|
#: posix/getopt.c:721 posix/getopt.c:850
|
|
#, c-format
|
|
msgid "%s: option requires an argument -- %c\n"
|
|
msgstr "%s: 이 옵션은 인수가 필요합니다 -- %c\n"
|
|
|
|
#: time/zic.c:837 time/zic.c:1248 time/zic.c:1268
|
|
#, c-format
|
|
msgid "%s: panic: Invalid l_value %d\n"
|
|
msgstr "%s: panic: 부적절한 좌항값 %d\n"
|
|
|
|
#: locale/programs/charmap.c:600
|
|
#, c-format, fuzzy
|
|
msgid "%s: premature end of file"
|
|
msgstr "파일이 완결되지 않은 채 끝남"
|
|
|
|
#: posix/getopt.c:661
|
|
#, c-format
|
|
msgid "%s: unrecognized option `%c%s'\n"
|
|
msgstr "%s: 인식할 수 없는 옵션 `%c%s'\n"
|
|
|
|
#: posix/getopt.c:657
|
|
#, c-format
|
|
msgid "%s: unrecognized option `--%s'\n"
|
|
msgstr "%s: 인식할 수 없는 옵션 `--%s'\n"
|
|
|
|
#: time/zic.c:446
|
|
#, c-format
|
|
msgid ""
|
|
"%s: usage is %s [ -s ] [ -v ] [ -l localtime ] [ -p posixrules ] [ -d "
|
|
"directory ]\n"
|
|
"\t[ -L leapseconds ] [ -y yearistype ] [ filename ... ]\n"
|
|
msgstr ""
|
|
"%s: 사용법은 %s [ -s ] [ -v ] [ -l 지역시각 ] [ -p 포식스규칙 ] [ -d "
|
|
"디렉토리 ]\n"
|
|
"\t[ -L 윤초 ] [ -y yearistype ] [ 파일이름 ... ]\n"
|
|
|
|
#: time/zdump.c:165
|
|
#, c-format
|
|
msgid "%s: usage is %s [ -v ] [ -c cutoff ] zonename ...\n"
|
|
msgstr "%s: 사용법은 %s [ -v ] [ -c cutoff ] 지역명 ... 입니다\n"
|
|
|
|
#: sunrpc/clnt_perr.c:125
|
|
#, c-format
|
|
msgid "(unknown authentication error - %d)"
|
|
msgstr "(알 수 없는 인증 오류 - %d)"
|
|
|
|
#: sunrpc/rpcinfo.c:555
|
|
msgid "(unknown)"
|
|
msgstr "(알 수 없음)"
|
|
|
|
#: catgets/gencat.c:253
|
|
msgid "*standard input*"
|
|
msgstr "*표준 입력*"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:766
|
|
msgid ".lib section in a.out corrupted"
|
|
msgstr "a.out의 .lib 절이 손상되었음"
|
|
|
|
#: inet/rcmd.c:328
|
|
msgid ".rhosts fstat failed"
|
|
msgstr ".rhosts fstat 실패"
|
|
|
|
#: inet/rcmd.c:324
|
|
msgid ".rhosts lstat failed"
|
|
msgstr ".rhosts lstat 실패"
|
|
|
|
#: inet/rcmd.c:326
|
|
msgid ".rhosts not regular file"
|
|
msgstr ".rhosts는 일반 파일이 아님"
|
|
|
|
#: inet/rcmd.c:332
|
|
msgid ".rhosts writeable by other than owner"
|
|
msgstr ".rhosts는 소유자가 아닌 사람이 변경할 수 있음"
|
|
|
|
#: sunrpc/clnt_perr.c:112 sunrpc/clnt_perr.c:133
|
|
#, c-format
|
|
msgid "; low version = %lu, high version = %lu"
|
|
msgstr "; 낮은 버전 = %lu, 높은 버전 = %lu"
|
|
|
|
#: sunrpc/clnt_perr.c:119
|
|
msgid "; why = "
|
|
msgstr "; 이유 = "
|
|
|
|
#: locale/programs/ld-ctype.c:326
|
|
#, c-format
|
|
msgid "<SP> character must not be in class `%s'"
|
|
msgstr "<SP> 문자는 `%s' 클래스에 있으면 안됩니다"
|
|
|
|
#: locale/programs/ld-ctype.c:317
|
|
#, c-format
|
|
msgid "<SP> character not in class `%s'"
|
|
msgstr "<SP> 문자는 `%s' 클래스에 없음"
|
|
|
|
#. TRANS The experienced user will know what is wrong.
|
|
#. TRANS @c This error code is a joke. Its perror text is part of the joke.
|
|
#. TRANS @c Don't change it.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:591
|
|
msgid "?"
|
|
msgstr "?"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:762
|
|
msgid "Accessing a corrupted shared library"
|
|
msgstr "손상된 공유 라이브러리에 접근함"
|
|
|
|
#. TRANS The requested socket address is already in use. @xref{Socket Addresses}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:354
|
|
msgid "Address already in use"
|
|
msgstr "주소가 이미 사용 중입니다"
|
|
|
|
#. TRANS The address family specified for a socket is not supported; it is
|
|
#. TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:349
|
|
msgid "Address family not supported by protocol"
|
|
msgstr "주소군이 규약에서 지원되지 않음"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:714
|
|
msgid "Advertise error"
|
|
msgstr ""
|
|
|
|
msgid "Alarm clock"
|
|
msgstr "자명종 시계"
|
|
|
|
#. TRANS Argument list too long; used when the arguments passed to a new program
|
|
#. TRANS being executed with one of the @code{exec} functions (@pxref{Executing a
|
|
#. TRANS File}) occupy too much memory space. This condition never arises in the
|
|
#. TRANS GNU system.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:57
|
|
msgid "Argument list too long"
|
|
msgstr "인수 명단이 너무 깁니다"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:770
|
|
msgid "Attempting to link in too many shared libraries"
|
|
msgstr ""
|
|
|
|
#: sunrpc/clnt_perr.c:276
|
|
msgid "Authentication OK"
|
|
msgstr "인증 승인됨"
|
|
|
|
#. TRANS ???
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:549
|
|
msgid "Authentication error"
|
|
msgstr "인증 오류"
|
|
|
|
#. TRANS Bad address; an invalid pointer was detected.
|
|
#. TRANS In the GNU system, this error never happens; you get a signal instead.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:102
|
|
msgid "Bad address"
|
|
msgstr "잘못된 주소"
|
|
|
|
#. TRANS Bad file descriptor; for example, I/O on a descriptor that has been
|
|
#. TRANS closed or reading from a descriptor open only for writing (or vice
|
|
#. TRANS versa).
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:70
|
|
msgid "Bad file descriptor"
|
|
msgstr "잘못된 파일 기술자"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:682
|
|
msgid "Bad font file format"
|
|
msgstr "잘못된 폰트 파일 형식"
|
|
|
|
#. TRANS A file that isn't a block special file was given in a situation that
|
|
#. TRANS requires one. For example, trying to mount an ordinary file as a file
|
|
#. TRANS system in Unix gives this error.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:109
|
|
msgid "Block device required"
|
|
msgstr "블록 장치가 필요함"
|
|
|
|
#: sunrpc/pmap_rmt.c:337
|
|
msgid "Broadcast select problem"
|
|
msgstr "브로드캐스트 선택 문제"
|
|
|
|
#. TRANS Broken pipe; there is no process reading from the other end of a pipe.
|
|
#. TRANS Every library function that returns this error code also generates a
|
|
#. TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled
|
|
#. TRANS or blocked. Thus, your program will never actually see @code{EPIPE}
|
|
#. TRANS unless it has handled or blocked @code{SIGPIPE}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:222
|
|
msgid "Broken pipe"
|
|
msgstr "깨어진 파이프"
|
|
|
|
msgid "Bus error"
|
|
msgstr "버스 오류"
|
|
|
|
msgid "CPU time limit exceeded"
|
|
msgstr "CPU 시간 제한 초과함"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:758
|
|
msgid "Can not access a needed shared library"
|
|
msgstr "필요한 공유 라이브러리에 접근할 수 없습니다"
|
|
|
|
#. TRANS No memory available. The system cannot allocate more virtual memory
|
|
#. TRANS because its capacity is full.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:91
|
|
msgid "Cannot allocate memory"
|
|
msgstr "메모리를 할당할 수 없습니다"
|
|
|
|
#. TRANS The requested socket address is not available; for example, you tried
|
|
#. TRANS to give a socket a name that doesn't match the local host name.
|
|
#. TRANS @xref{Socket Addresses}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:361
|
|
msgid "Cannot assign requested address"
|
|
msgstr "요청된 주소를 배정할 수 없습니다"
|
|
|
|
#: sunrpc/pmap_rmt.c:255
|
|
msgid "Cannot create socket for broadcast rpc"
|
|
msgstr "브로드캐스트 rpc를 위한 소켓을 만들 수 없습니다"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:774
|
|
msgid "Cannot exec a shared library directly"
|
|
msgstr "공유 라이브러리를 직접 실행할 수 없습니다"
|
|
|
|
#: sunrpc/pmap_rmt.c:349
|
|
msgid "Cannot receive reply to broadcast"
|
|
msgstr "브로드캐스트에 대한 응답을 받을 수 없습니다"
|
|
|
|
#: sunrpc/pmap_clnt.c:79
|
|
msgid "Cannot register service"
|
|
msgstr "서비스를 등록할 수 없습니다"
|
|
|
|
#. TRANS The socket has already been shut down.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:422
|
|
msgid "Cannot send after transport endpoint shutdown"
|
|
msgstr "전송 종료지점이 지난 후에 보낼 수 없습니다"
|
|
|
|
#: sunrpc/pmap_rmt.c:313
|
|
msgid "Cannot send broadcast packet"
|
|
msgstr "브로드캐스트 패킷을 보낼 수 없습니다"
|
|
|
|
#: sunrpc/pmap_rmt.c:261
|
|
msgid "Cannot set socket option SO_BROADCAST"
|
|
msgstr "소켓 옵션 SO_BROADCAST를 설정할 수 없습니다"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:622
|
|
msgid "Channel number out of range"
|
|
msgstr "범위를 벗어난 채널 번호"
|
|
|
|
msgid "Child exited"
|
|
msgstr "자식이 종료됨"
|
|
|
|
#: sunrpc/clnt_perr.c:286
|
|
msgid "Client credential too weak"
|
|
msgstr "클라이언트 자격 부여가 너무 약함"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:722
|
|
msgid "Communication error on send"
|
|
msgstr "전송 중 통신 오류"
|
|
|
|
#. TRANS Go home and have a glass of warm, dairy-fresh milk.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:601
|
|
msgid "Computer bought the farm"
|
|
msgstr "컴퓨터가 농장을 샀습니다"
|
|
|
|
#: locale/programs/ld-ctype.c:1197
|
|
msgid "Computing table size for character classes might take a while..."
|
|
msgstr "문자 클래스의 표 크기 계산은 시간이 약간 걸릴 수 있습니다..."
|
|
|
|
#: locale/programs/ld-collate.c:327
|
|
msgid "Computing table size for collation information might take a while..."
|
|
msgstr "조사 정보의 표 크기 계산은 시간이 약간 걸릴 수 있습니다... "
|
|
|
|
#. TRANS A remote host refused to allow the network connection (typically because
|
|
#. TRANS it is not running the requested service).
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:439
|
|
msgid "Connection refused"
|
|
msgstr "연결이 거부됨"
|
|
|
|
#. TRANS A network connection was closed for reasons outside the control of the
|
|
#. TRANS local host, such as by the remote machine rebooting or an unrecoverable
|
|
#. TRANS protocol violation.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:389
|
|
msgid "Connection reset by peer"
|
|
msgstr ""
|
|
|
|
#. TRANS A socket operation with a specified timeout received no response during
|
|
#. TRANS the timeout period.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:433
|
|
msgid "Connection timed out"
|
|
msgstr "연결 시간 초과"
|
|
|
|
msgid "Continued"
|
|
msgstr "계속됨"
|
|
|
|
#: catgets/gencat.c:169 db/makedb.c:120 locale/programs/locale.c:187
|
|
#: locale/programs/localedef.c:177
|
|
#, c-format
|
|
msgid ""
|
|
"Copyright (C) %s Free Software Foundation, Inc.\n"
|
|
"This is free software; see the source for copying conditions. There is NO\n"
|
|
"warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
|
|
msgstr ""
|
|
"저작권 (C) %s Free Software Foundation, Inc.\n"
|
|
"이 프로그램은 공개 소프트웨어입니다; 복사 조건은 소스를 참조하십시오.\n"
|
|
|
|
#. TRANS No default destination address was set for the socket. You get this
|
|
#. TRANS error when you try to transmit data over a connectionless socket,
|
|
#. TRANS without first specifying a destination for the data with @code{connect}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:417
|
|
msgid "Destination address required"
|
|
msgstr "목적지 주소가 필요함"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:686
|
|
msgid "Device not a stream"
|
|
msgstr "장치가 스트림이 아님"
|
|
|
|
#. TRANS No such device or address. The system tried to use the device
|
|
#. TRANS represented by a file you specified, and it couldn't find the device.
|
|
#. TRANS This can mean that the device file was installed incorrectly, or that
|
|
#. TRANS the physical device is missing or not correctly attached to the
|
|
#. TRANS computer.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:49
|
|
msgid "Device not configured"
|
|
msgstr "장치가 설정되지 않았음"
|
|
|
|
#. TRANS Resource busy; a system resource that can't be shared is already in use.
|
|
#. TRANS For example, if you try to delete a file that is the root of a currently
|
|
#. TRANS mounted filesystem, you get this error.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:116
|
|
msgid "Device or resource busy"
|
|
msgstr "장치나 자원이 동작 중"
|
|
|
|
#. TRANS Directory not empty, where an empty directory was expected. Typically,
|
|
#. TRANS this error occurs when you are trying to delete a directory.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:468
|
|
msgid "Directory not empty"
|
|
msgstr "디렉토리가 비어있지 않음"
|
|
|
|
#. TRANS The user's disk quota was exceeded.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:486
|
|
msgid "Disc quota exceeded"
|
|
msgstr "디스크 할당량이 초과됨"
|
|
|
|
#: sunrpc/clnt_perr.c:254
|
|
#, c-format
|
|
msgid "Error %d"
|
|
msgstr "오류 %d"
|
|
|
|
#: string/../sysdeps/mach/_strerror.c:43
|
|
msgid "Error in unknown error system: "
|
|
msgstr "알 수 없는 오류 시스템에 오류: "
|
|
|
|
#: inet/ruserpass.c:161
|
|
msgid "Error: .netrc file is readable by others."
|
|
msgstr "오류: .netrc 파일을 다른 사람이 읽을 수 있습니다."
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:662
|
|
msgid "Exchange full"
|
|
msgstr "교환이 가득참"
|
|
|
|
#. TRANS Invalid executable file format. This condition is detected by the
|
|
#. TRANS @code{exec} functions; see @ref{Executing a File}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:63
|
|
msgid "Exec format error"
|
|
msgstr "Exec 형식 오류"
|
|
|
|
#: locale/programs/localedef.c:213
|
|
msgid "FATAL: system does not define `_POSIX2_LOCALEDEF'"
|
|
msgstr "중요: 시스템에 `_POSIX2_LOCALEDEF'가 정의되어 있지 않습니다"
|
|
|
|
#: sunrpc/clnt_perr.c:290
|
|
msgid "Failed (unspecified error)"
|
|
msgstr "실패 (지정되지 않은 오류)"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:750
|
|
msgid "File descriptor in bad state"
|
|
msgstr "파일 기술자가 잘못된 상태에 있음"
|
|
|
|
#. TRANS File exists; an existing file was specified in a context where it only
|
|
#. TRANS makes sense to specify a new file.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:122
|
|
msgid "File exists"
|
|
msgstr "파일이 존재합니다"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:678
|
|
msgid "File locking deadlock error"
|
|
msgstr ""
|
|
|
|
#. TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for
|
|
#. TRANS Files}) or host name too long (in @code{gethostname} or
|
|
#. TRANS @code{sethostname}; @pxref{Host Identification}).
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:452
|
|
msgid "File name too long"
|
|
msgstr "파일 이름이 너무 깁니다"
|
|
|
|
msgid "File size limit exceeded"
|
|
msgstr "파일 크기 제한을 초과함"
|
|
|
|
#. TRANS File too big; the size of a file would be larger than allowed by the system.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:190
|
|
msgid "File too large"
|
|
msgstr "파일이 너무 큽니다"
|
|
|
|
msgid "Floating point exception"
|
|
msgstr "부동 소수점 예외"
|
|
|
|
#. TRANS Function not implemented. Some functions have commands or options defined
|
|
#. TRANS that might not be supported in all implementations, and this is the kind
|
|
#. TRANS of error you get if you request them and they are not supported.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:561
|
|
msgid "Function not implemented"
|
|
msgstr "함수가 구현되지 않았음"
|
|
|
|
#. TRANS This error code has no purpose.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:606
|
|
msgid "Gratuitous error"
|
|
msgstr "이유없는 오류"
|
|
|
|
msgid "Hangup"
|
|
msgstr "끊어짐"
|
|
|
|
#. TRANS The remote host for a requested network connection is down.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:457
|
|
msgid "Host is down"
|
|
msgstr "호스트가 죽었습니다"
|
|
|
|
#: resolv/herror.c:75
|
|
msgid "Host name lookup failure"
|
|
msgstr "호스트 이름 탐색 실패"
|
|
|
|
msgid "I/O possible"
|
|
msgstr "입출력 가능"
|
|
|
|
msgid "IOT trap"
|
|
msgstr "IOT 트랩"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:618
|
|
msgid "Identifier removed"
|
|
msgstr "식별자 제거됨"
|
|
|
|
msgid "Illegal Instruction"
|
|
msgstr "잘못된 명령어"
|
|
|
|
#. TRANS Invalid seek operation (such as on a pipe).
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:201
|
|
msgid "Illegal seek"
|
|
msgstr "잘못된 탐색"
|
|
|
|
#. TRANS Inappropriate file type or format. The file was the wrong type for the
|
|
#. TRANS operation, or a data file had the wrong format.
|
|
#. TRANS
|
|
#. TRANS On some systems @code{chmod} returns this error if you try to set the
|
|
#. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:544
|
|
msgid "Inappropriate file type or format"
|
|
msgstr "부적절한 파일 타입 또는 형식"
|
|
|
|
#. TRANS Inappropriate I/O control operation, such as trying to set terminal
|
|
#. TRANS modes on an ordinary file.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:176
|
|
msgid "Inappropriate ioctl for device"
|
|
msgstr "장치에 대해 부적절한 ioctl"
|
|
|
|
#. TRANS In the GNU system, servers supporting the @code{term} protocol return
|
|
#. TRANS this error for certain operations when the caller is not in the
|
|
#. TRANS foreground process group of the terminal. Users do not usually see this
|
|
#. TRANS error because functions such as @code{read} and @code{write} translate
|
|
#. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control},
|
|
#. TRANS for information on process groups and these signals.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:577
|
|
msgid "Inappropriate operation for background process"
|
|
msgstr "배경 프로세스로 부적합한 동작"
|
|
|
|
#. TRANS Input/output error; usually used for physical read or write errors.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:40
|
|
msgid "Input/output error"
|
|
msgstr "입력/출력 오류"
|
|
|
|
msgid "Interrupt"
|
|
msgstr "인터럽트"
|
|
|
|
#. TRANS Interrupted function call; an asynchronous signal occured and prevented
|
|
#. TRANS completion of the call. When this happens, you should try the call
|
|
#. TRANS again.
|
|
#. TRANS
|
|
#. TRANS You can choose to have functions resume after a signal that is handled,
|
|
#. TRANS rather than failing with @code{EINTR}; see @ref{Interrupted
|
|
#. TRANS Primitives}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:35
|
|
msgid "Interrupted system call"
|
|
msgstr "중단된 시스템 호출"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:610
|
|
msgid "Interrupted system call should be restarted"
|
|
msgstr "중단된 시스템 호출은 재시작되어야 합니다"
|
|
|
|
#. TRANS Invalid argument. This is used to indicate various kinds of problems
|
|
#. TRANS with passing the wrong argument to a library function.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:152
|
|
msgid "Invalid argument"
|
|
msgstr "부적절한 인수"
|
|
|
|
#: posix/regex.c:946
|
|
msgid "Invalid back reference"
|
|
msgstr "부적절한 후방 참조"
|
|
|
|
#: posix/regex.c:944
|
|
msgid "Invalid character class name"
|
|
msgstr "부적절한 문자 클래스 이름"
|
|
|
|
#: sunrpc/clnt_perr.c:278
|
|
msgid "Invalid client credential"
|
|
msgstr "부적절한 클라이언트 자격 부여"
|
|
|
|
#: sunrpc/clnt_perr.c:282
|
|
msgid "Invalid client verifier"
|
|
msgstr "부적절한 클라이언트 검증기"
|
|
|
|
#: posix/regex.c:943
|
|
msgid "Invalid collation character"
|
|
msgstr "부적절한 대조 문자"
|
|
|
|
#: posix/regex.c:950
|
|
msgid "Invalid content of \\{\\}"
|
|
msgstr "\\{\\}에 부적절한 내용물이 있음"
|
|
|
|
#. TRANS An attempt to make an improper link across file systems was detected.
|
|
#. TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but
|
|
#. TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}).
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:129
|
|
msgid "Invalid cross-device link"
|
|
msgstr "장치간 연결이 부적절함"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:654
|
|
msgid "Invalid exchange"
|
|
msgstr "부적절한 교환"
|
|
|
|
#. TRANS While decoding a multibyte character the function came along an invalid
|
|
#. TRANS or an incomplete sequence of bytes or the given wide character is invalid.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:567
|
|
msgid "Invalid or incomplete multibyte or wide character"
|
|
msgstr "부적절하거나 불완전한 다중바이트 또는 광역 문자"
|
|
|
|
#: posix/regex.c:953
|
|
msgid "Invalid preceding regular expression"
|
|
msgstr "앞선 정규식이 부적절함"
|
|
|
|
#: posix/regex.c:951
|
|
msgid "Invalid range end"
|
|
msgstr "부적절한 범위 끝"
|
|
|
|
#: posix/regex.c:942
|
|
msgid "Invalid regular expression"
|
|
msgstr "부적절한 정규식"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:670
|
|
msgid "Invalid request code"
|
|
msgstr "부적절한 요청 코드"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:658
|
|
msgid "Invalid request descriptor"
|
|
msgstr "잘못된 요청 기술자"
|
|
|
|
#: sunrpc/clnt_perr.c:288
|
|
msgid "Invalid server verifier"
|
|
msgstr "부적절한 서버 검증기"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:674
|
|
msgid "Invalid slot"
|
|
msgstr "부적절한 슬롯"
|
|
|
|
#. TRANS File is a directory; you cannot open a directory for writing,
|
|
#. TRANS or create or remove hard links to it.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:146
|
|
msgid "Is a directory"
|
|
msgstr "디렉토리입니다"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:794
|
|
msgid "Is a named type file"
|
|
msgstr ""
|
|
|
|
msgid "Killed"
|
|
msgstr "죽었음"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:650
|
|
msgid "Level 2 halted"
|
|
msgstr "등급 2 멎었음"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:626
|
|
msgid "Level 2 not synchronized"
|
|
msgstr "등급 2가 동기화되지 않음"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:630
|
|
msgid "Level 3 halted"
|
|
msgstr "등급 3 멎었음"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:634
|
|
msgid "Level 3 reset"
|
|
msgstr "등급 3 리셋"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:710
|
|
msgid "Link has been severed"
|
|
msgstr ""
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:638
|
|
msgid "Link number out of range"
|
|
msgstr "범위를 벗어난 링크 번호"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:702
|
|
msgid "Machine is not on the network"
|
|
msgstr "기기가 네트워크 상에 있지 않습니다"
|
|
|
|
#: posix/regex.c:952
|
|
msgid "Memory exhausted"
|
|
msgstr "메모리가 바닥남"
|
|
|
|
#. TRANS The size of a message sent on a socket was larger than the supported
|
|
#. TRANS maximum size.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:305
|
|
msgid "Message too long"
|
|
msgstr "메시지가 너무 깁니다"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:730
|
|
msgid "Multihop attempted"
|
|
msgstr ""
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:746
|
|
msgid "Name not unique on network"
|
|
msgstr "이름이 네트워크 상에서 단일하지 않음"
|
|
|
|
#. TRANS ???
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:554
|
|
msgid "Need authenticator"
|
|
msgstr "인증기가 필요함"
|
|
|
|
#. TRANS A network connection was reset because the remote host crashed.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:377
|
|
msgid "Network dropped connection on reset"
|
|
msgstr ""
|
|
|
|
#. TRANS A socket operation failed because the network was down.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:366
|
|
msgid "Network is down"
|
|
msgstr "네트워크가 죽었습니다"
|
|
|
|
#. TRANS A socket operation failed because the subnet containing the remote host
|
|
#. TRANS was unreachable.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:372
|
|
msgid "Network is unreachable"
|
|
msgstr "네트워크가 접근 불가능합니다"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:646
|
|
msgid "No CSI structure available"
|
|
msgstr "사용 가능한 CSI 구조가 없음"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:790
|
|
msgid "No XENIX semaphores available"
|
|
msgstr "사용 가능한 XENIX 세마포어가 없음"
|
|
|
|
#: resolv/herror.c:77
|
|
msgid "No address associated with name"
|
|
msgstr "이름과 대응되는 주소가 없음"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:666
|
|
msgid "No anode"
|
|
msgstr ""
|
|
|
|
#. TRANS The kernel's buffers for I/O operations are all in use. In GNU, this
|
|
#. TRANS error is always synonymous with @code{ENOMEM}; you may get one or the
|
|
#. TRANS other from network operations.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:396
|
|
msgid "No buffer space available"
|
|
msgstr "사용 가능한 버퍼 공간이 없음"
|
|
|
|
#. TRANS There are no child processes. This error happens on operations that are
|
|
#. TRANS supposed to manipulate child processes, when there aren't any processes
|
|
#. TRANS to manipulate.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:77
|
|
msgid "No child processes"
|
|
msgstr "자식 프로세스가 없음"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:690
|
|
msgid "No data available"
|
|
msgstr "사용 가능한 자료가 없음"
|
|
|
|
#. TRANS No locks available. This is used by the file locking facilities; see
|
|
#. TRANS @ref{File Locks}. This error is never generated by the GNU system, but
|
|
#. TRANS it can result from an operation to an NFS server running another
|
|
#. TRANS operating system.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:535
|
|
msgid "No locks available"
|
|
msgstr "사용가능한 잠금장치가 없음"
|
|
|
|
#: posix/regex.c:941
|
|
msgid "No match"
|
|
msgstr "맞는 짝 없음"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:614
|
|
msgid "No message of desired type"
|
|
msgstr "적당한 형을 가진 메시지가 없음"
|
|
|
|
#: posix/regex.c:5204
|
|
msgid "No previous regular expression"
|
|
msgstr "전의 정규식이 없음"
|
|
|
|
#: sunrpc/rpcinfo.c:515
|
|
msgid "No remote programs registered.\n"
|
|
msgstr "원격 프로그램이 등록되지 않았음.\n"
|
|
|
|
#. TRANS The remote host for a requested network connection is not reachable.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:462
|
|
msgid "No route to host"
|
|
msgstr ""
|
|
|
|
#. TRANS No space left on device; write operation on a file failed because the
|
|
#. TRANS disk is full.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:196
|
|
msgid "No space left on device"
|
|
msgstr "디바이스에 남은 공간이 없음"
|
|
|
|
#. TRANS No such file or directory. This is a ``file doesn't exist'' error
|
|
#. TRANS for ordinary files that are referenced in contexts where they are
|
|
#. TRANS expected to already exist.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:19
|
|
msgid "No such file or directory"
|
|
msgstr "그런 파일이나 디렉토리가 없음"
|
|
|
|
#. TRANS No process matches the specified process ID.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:24
|
|
msgid "No such process"
|
|
msgstr "그런 프로세스가 없음"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:786
|
|
msgid "Not a XENIX named type file"
|
|
msgstr ""
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:738
|
|
msgid "Not a data message"
|
|
msgstr "자료 메시지가 아님"
|
|
|
|
#. TRANS A file that isn't a directory was specified when a directory is required.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:140
|
|
msgid "Not a directory"
|
|
msgstr "디렉토리가 아닙니다"
|
|
|
|
#. TRANS Domain error; used by mathematical functions when an argument value does
|
|
#. TRANS not fall into the domain over which the function is defined.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:228
|
|
msgid "Numerical argument out of domain"
|
|
msgstr "영역을 벗어난 수치 인수"
|
|
|
|
#. TRANS Range error; used by mathematical functions when the result value is
|
|
#. TRANS not representable because of overflow or underflow.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:234
|
|
msgid "Numerical result out of range"
|
|
msgstr "범위를 벗어난 수치 결과"
|
|
|
|
#. TRANS An attempt was made to NFS-mount a remote file system with a file name that
|
|
#. TRANS already specifies an NFS-mounted file.
|
|
#. TRANS (This is an error on some operating systems, but we expect it to work
|
|
#. TRANS properly on the GNU system, making this error code impossible.)
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:502
|
|
msgid "Object is remote"
|
|
msgstr "원격 개체입니다"
|
|
|
|
#: time/zic.c:1939
|
|
msgid "Odd number of quotation marks"
|
|
msgstr "따옴표가 홀수 개입니다"
|
|
|
|
#. TRANS An operation is already in progress on an object that has non-blocking
|
|
#. TRANS mode selected.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:294
|
|
msgid "Operation already in progress"
|
|
msgstr "이미 진행 중인 명령"
|
|
|
|
#. TRANS Operation not permitted; only the owner of the file (or other resource)
|
|
#. TRANS or processes with special privileges can perform the operation.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:12
|
|
msgid "Operation not permitted"
|
|
msgstr "명령이 허용되지 않음"
|
|
|
|
#. TRANS The operation you requested is not supported. Some socket functions
|
|
#. TRANS don't make sense for all types of sockets, and others may not be
|
|
#. TRANS implemented for all communications protocols. In the GNU system, this
|
|
#. TRANS error can happen for many calls when the object does not support the
|
|
#. TRANS particular operation; it is a generic indication that the server knows
|
|
#. TRANS nothing to do for that call.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:338
|
|
msgid "Operation not supported"
|
|
msgstr "명령이 지원되지 않음"
|
|
|
|
#. TRANS The wrong type of device was given to a function that expects a
|
|
#. TRANS particular sort of device.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:135
|
|
msgid "Operation not supported by device"
|
|
msgstr "장치에서 지원되지 않는 명령"
|
|
|
|
#. TRANS An operation that cannot complete immediately was initiated on an object
|
|
#. TRANS that has non-blocking mode selected. Some functions that must always
|
|
#. TRANS block (such as @code{connect}; @pxref{Connecting}) never return
|
|
#. TRANS @code{EAGAIN}. Instead, they return @code{EINPROGRESS} to indicate that
|
|
#. TRANS the operation has begun and will take some time. Attempts to manipulate
|
|
#. TRANS the object before the call completes return @code{EALREADY}. You can
|
|
#. TRANS use the @code{select} function to find out when the pending operation
|
|
#. TRANS has completed; @pxref{Waiting for I/O}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:288
|
|
msgid "Operation now in progress"
|
|
msgstr "지금 진행중인 명령"
|
|
|
|
#. TRANS In the GNU C library, this is another name for @code{EAGAIN} (above).
|
|
#. TRANS The values are always the same, on every operating system.
|
|
#. TRANS
|
|
#. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a
|
|
#. TRANS separate error code.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:276
|
|
msgid "Operation would block"
|
|
msgstr ""
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:698
|
|
msgid "Out of streams resources"
|
|
msgstr "스트림 자원 부족"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:706
|
|
msgid "Package not installed"
|
|
msgstr "패키지가 설치되지 않음"
|
|
|
|
#. TRANS Permission denied; the file permissions do not allow the attempted operation.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:96
|
|
msgid "Permission denied"
|
|
msgstr "허가 거부됨"
|
|
|
|
msgid "Power failure"
|
|
msgstr "전력이 끊어짐"
|
|
|
|
#: posix/regex.c:954
|
|
msgid "Premature end of regular expression"
|
|
msgstr "정규식이 완결되지 않은 채 끝남"
|
|
|
|
msgid "Profiling timer expired"
|
|
msgstr "프로파일링 타이머의 시간이 초과됨"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:642
|
|
msgid "Protocol driver not attached"
|
|
msgstr "규약 구동기에 연결되지 않음"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:726
|
|
msgid "Protocol error"
|
|
msgstr "규약 오류"
|
|
|
|
#. TRANS The socket communications protocol family you requested is not supported.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:343
|
|
msgid "Protocol family not supported"
|
|
msgstr "규약군이 지원되지 않음"
|
|
|
|
#. TRANS You specified a socket option that doesn't make sense for the
|
|
#. TRANS particular protocol being used by the socket. @xref{Socket Options}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:316
|
|
msgid "Protocol not available"
|
|
msgstr "규약 사용 불가능"
|
|
|
|
#. TRANS The socket domain does not support the requested communications protocol
|
|
#. TRANS (perhaps because the requested protocol is completely invalid.)
|
|
#. TRANS @xref{Creating a Socket}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:323
|
|
msgid "Protocol not supported"
|
|
msgstr "규약이 지원되지 않음"
|
|
|
|
#. TRANS The socket type does not support the requested communications protocol.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:310
|
|
msgid "Protocol wrong type for socket"
|
|
msgstr "소켓에 대한 규약이 잘못됨"
|
|
|
|
msgid "Quit"
|
|
msgstr "종료"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:734
|
|
msgid "RFS specific error"
|
|
msgstr "RFS에 국한된 오류"
|
|
|
|
#. TRANS ???
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:527
|
|
msgid "RPC bad procedure for program"
|
|
msgstr "RPC 프로그램의 프로시져가 잘못됨"
|
|
|
|
#. TRANS ???
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:517
|
|
msgid "RPC program not available"
|
|
msgstr "RPC 프로그램 사용 불가능"
|
|
|
|
#. TRANS ???
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:522
|
|
msgid "RPC program version wrong"
|
|
msgstr "RPC 프로그램 버전이 잘못됨"
|
|
|
|
#. TRANS ???
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:507
|
|
msgid "RPC struct is bad"
|
|
msgstr "RPC 구조가 잘못되었습니다"
|
|
|
|
#. TRANS ???
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:512
|
|
msgid "RPC version wrong"
|
|
msgstr "RPC 버전이 잘못됨"
|
|
|
|
#: sunrpc/clnt_perr.c:217
|
|
msgid "RPC: (unknown error code)"
|
|
msgstr "RPC: (알 수 없는 오류 코드)"
|
|
|
|
#: sunrpc/clnt_perr.c:179
|
|
msgid "RPC: Authentication error"
|
|
msgstr "RPC: 인증 오류"
|
|
|
|
#: sunrpc/clnt_perr.c:169
|
|
msgid "RPC: Can't decode result"
|
|
msgstr "RPC: 결과를 복호화할 수 없습니다"
|
|
|
|
#: sunrpc/clnt_perr.c:167
|
|
msgid "RPC: Can't encode arguments"
|
|
msgstr "RPC: 인수를 부호화할 수 없습니다"
|
|
|
|
#: sunrpc/clnt_perr.c:199
|
|
msgid "RPC: Failed (unspecified error)"
|
|
msgstr "RPC: 실패 (지정되지 않은 오류)"
|
|
|
|
#: sunrpc/clnt_perr.c:177
|
|
msgid "RPC: Incompatible versions of RPC"
|
|
msgstr "RPC: 호환되지 않는 RPC 버전"
|
|
|
|
#: sunrpc/clnt_perr.c:195
|
|
msgid "RPC: Port mapper failure"
|
|
msgstr "RPC: 포트 맵퍼 실패"
|
|
|
|
#: sunrpc/clnt_perr.c:185
|
|
msgid "RPC: Procedure unavailable"
|
|
msgstr "RPC: 프로시져 사용 불가능"
|
|
|
|
#: sunrpc/clnt_perr.c:197
|
|
msgid "RPC: Program not registered"
|
|
msgstr "RPC: 프로그램이 등록되지 않음"
|
|
|
|
#: sunrpc/clnt_perr.c:181
|
|
msgid "RPC: Program unavailable"
|
|
msgstr "RPC: 프로그램 사용 불가능"
|
|
|
|
#: sunrpc/clnt_perr.c:183
|
|
msgid "RPC: Program/version mismatch"
|
|
msgstr "RPC: 프로그램/버전 불일치"
|
|
|
|
#: sunrpc/clnt_perr.c:189
|
|
msgid "RPC: Remote system error"
|
|
msgstr "RPC: 원격 시스템 오류"
|
|
|
|
#: sunrpc/clnt_perr.c:187
|
|
msgid "RPC: Server can't decode arguments"
|
|
msgstr "RPC: 서버가 인수를 복호화할 수 없습니다"
|
|
|
|
#: sunrpc/clnt_perr.c:165
|
|
msgid "RPC: Success"
|
|
msgstr "RPC: 성공"
|
|
|
|
#: sunrpc/clnt_perr.c:175
|
|
msgid "RPC: Timed out"
|
|
msgstr "RPC: 시간 초과"
|
|
|
|
#: sunrpc/clnt_perr.c:173
|
|
msgid "RPC: Unable to receive"
|
|
msgstr "RPC: 받을 수 없음"
|
|
|
|
#: sunrpc/clnt_perr.c:171
|
|
msgid "RPC: Unable to send"
|
|
msgstr "RPC: 보낼 수 없음"
|
|
|
|
#: sunrpc/clnt_perr.c:191
|
|
msgid "RPC: Unknown host"
|
|
msgstr "RPC: 알 수 없는 호스트"
|
|
|
|
#: sunrpc/clnt_perr.c:193
|
|
msgid "RPC: Unknown protocol"
|
|
msgstr "RPC: 알 수 없는 규약"
|
|
|
|
#. TRANS An attempt was made to modify something on a read-only file system.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:206
|
|
msgid "Read-only file system"
|
|
msgstr "읽기전용 파일 시스템"
|
|
|
|
#: posix/regex.c:955
|
|
msgid "Regular expression too big"
|
|
msgstr "정규식이 너무 큽니다"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:798
|
|
msgid "Remote I/O error"
|
|
msgstr "원격 입출력 오류"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:754
|
|
msgid "Remote address changed"
|
|
msgstr "원격 주소가 바뀌었음"
|
|
|
|
#: inet/ruserpass.c:162
|
|
msgid "Remove password or make file unreadable by others."
|
|
msgstr ""
|
|
|
|
#: catgets/gencat.c:224 db/makedb.c:227 locale/programs/locale.c:257
|
|
#: locale/programs/localedef.c:408
|
|
msgid "Report bugs to <bug-glibc@prep.ai.mit.edu>.\n"
|
|
msgstr "버그는 <bug-glibc@prep.ai.mit.edu>에 보고하십시오.\n"
|
|
|
|
#: resolv/herror.c:73
|
|
msgid "Resolver Error 0 (no error)"
|
|
msgstr "리솔버 오류 0 (오류아님)"
|
|
|
|
#: resolv/herror.c:115
|
|
msgid "Resolver internal error"
|
|
msgstr "리솔버 내부 오류"
|
|
|
|
#. TRANS Deadlock avoided; allocating a system resource would have resulted in a
|
|
#. TRANS deadlock situation. The system does not guarantee that it will notice
|
|
#. TRANS all such situations. This error means you got lucky and the system
|
|
#. TRANS noticed; it might just hang. @xref{File Locks}, for an example.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:85
|
|
msgid "Resource deadlock avoided"
|
|
msgstr ""
|
|
|
|
#. TRANS Resource temporarily unavailable; the call might work if you try again
|
|
#. TRANS later. The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN};
|
|
#. TRANS they are always the same in the GNU C library.
|
|
#. TRANS
|
|
#. TRANS This error can happen in a few different situations:
|
|
#. TRANS
|
|
#. TRANS @itemize @bullet
|
|
#. TRANS @item
|
|
#. TRANS An operation that would block was attempted on an object that has
|
|
#. TRANS non-blocking mode selected. Trying the same operation again will block
|
|
#. TRANS until some external condition makes it possible to read, write, or
|
|
#. TRANS connect (whatever the operation). You can use @code{select} to find out
|
|
#. TRANS when the operation will be possible; @pxref{Waiting for I/O}.
|
|
#. TRANS
|
|
#. TRANS @strong{Portability Note:} In older Unix many systems, this condition
|
|
#. TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code
|
|
#. TRANS different from @code{EAGAIN}. To make your program portable, you should
|
|
#. TRANS check for both codes and treat them the same.
|
|
#. TRANS
|
|
#. TRANS @item
|
|
#. TRANS A temporary resource shortage made an operation impossible. @code{fork}
|
|
#. TRANS can return this error. It indicates that the shortage is expected to
|
|
#. TRANS pass, so your program can try the call again later and it may succeed.
|
|
#. TRANS It is probably a good idea to delay for a few seconds before trying it
|
|
#. TRANS again, to allow time for other processes to release scarce resources.
|
|
#. TRANS Such shortages are usually fairly serious and affect the whole system,
|
|
#. TRANS so usually an interactive program should report the error to the user
|
|
#. TRANS and return to its command loop.
|
|
#. TRANS @end itemize
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:267
|
|
msgid "Resource temporarily unavailable"
|
|
msgstr "자원이 일시적으로 사용 불가능함"
|
|
|
|
msgid "Segmentation fault"
|
|
msgstr ""
|
|
|
|
#: sunrpc/clnt_perr.c:280
|
|
msgid "Server rejected credential"
|
|
msgstr "서버가 자격 부여를 거부했습니다"
|
|
|
|
#: sunrpc/clnt_perr.c:284
|
|
msgid "Server rejected verifier"
|
|
msgstr "서버가 검증기를 거부했습니다"
|
|
|
|
#. TRANS A file that isn't a socket was specified when a socket is required.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:299
|
|
msgid "Socket operation on non-socket"
|
|
msgstr "비소켓상의 소켓 동작"
|
|
|
|
#. TRANS The socket type is not supported.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:328
|
|
msgid "Socket type not supported"
|
|
msgstr "소켓 타입이 지원되지 않습니다"
|
|
|
|
#. TRANS A network connection was aborted locally.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:382
|
|
msgid "Software caused connection abort"
|
|
msgstr "소프트웨어가 연결 중단을 초래했습니다"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:718
|
|
msgid "Srmount error"
|
|
msgstr ""
|
|
|
|
#. TRANS Stale NFS file handle. This indicates an internal confusion in the NFS
|
|
#. TRANS system which is due to file system rearrangements on the server host.
|
|
#. TRANS Repairing this condition usually requires unmounting and remounting
|
|
#. TRANS the NFS file system on the local host.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:494
|
|
msgid "Stale NFS file handle"
|
|
msgstr "끊어진 NFS 파일 핸들"
|
|
|
|
msgid "Stopped"
|
|
msgstr "정지됨"
|
|
|
|
msgid "Stopped (signal)"
|
|
msgstr "정지됨 (신호)"
|
|
|
|
msgid "Stopped (tty input)"
|
|
msgstr "정지됨 (tty 입력)"
|
|
|
|
msgid "Stopped (tty output)"
|
|
msgstr "정지됨 (tty 출력)"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:778
|
|
msgid "Streams pipe error"
|
|
msgstr "스트림 파이프 오류"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:782
|
|
msgid "Structure needs cleaning"
|
|
msgstr ""
|
|
|
|
#: posix/regex.c:940 stdio-common/../sysdeps/gnu/errlist.c:7
|
|
msgid "Success"
|
|
msgstr "성공"
|
|
|
|
msgid "Terminated"
|
|
msgstr "종료됨"
|
|
|
|
#. TRANS An attempt to execute a file that is currently open for writing, or
|
|
#. TRANS write to a file that is currently being executed. Often using a
|
|
#. TRANS debugger to run a program is considered having it open for writing and
|
|
#. TRANS will cause this error. (The name stands for ``text file busy''.) This
|
|
#. TRANS is not an error in the GNU system; the text is copied as necessary.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:185
|
|
msgid "Text file busy"
|
|
msgstr "문서 파일 사용중"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:694
|
|
msgid "Timer expired"
|
|
msgstr "타이머의 시간이 초과됨"
|
|
|
|
#. TRANS Too many levels of symbolic links were encountered in looking up a file name.
|
|
#. TRANS This often indicates a cycle of symbolic links.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:445
|
|
msgid "Too many levels of symbolic links"
|
|
msgstr "기호 연결의 단계가 너무 많음"
|
|
|
|
#. TRANS Too many links; the link count of a single file would become too large.
|
|
#. TRANS @code{rename} can cause this error if the file being renamed already has
|
|
#. TRANS as many links as it can take (@pxref{Renaming Files}).
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:213
|
|
msgid "Too many links"
|
|
msgstr "연결이 너무 많음"
|
|
|
|
#. TRANS The current process has too many files open and can't open any more.
|
|
#. TRANS Duplicate descriptors do count toward this limit.
|
|
#. TRANS
|
|
#. TRANS In BSD and GNU, the number of open files is controlled by a resource
|
|
#. TRANS limit that can usually be increased. If you get this error, you might
|
|
#. TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited;
|
|
#. TRANS @pxref{Limits on Resources}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:163
|
|
msgid "Too many open files"
|
|
msgstr "열린 파일이 너무 많음"
|
|
|
|
#. TRANS There are too many distinct file openings in the entire system. Note
|
|
#. TRANS that any number of linked channels count as just one file opening; see
|
|
#. TRANS @ref{Linked Channels}. This error never occurs in the GNU system.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:170
|
|
msgid "Too many open files in system"
|
|
msgstr "시스템에 열린 파일이 너무 많음"
|
|
|
|
#. TRANS This means that the per-user limit on new process would be exceeded by
|
|
#. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on
|
|
#. TRANS the @code{RLIMIT_NPROC} limit.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:475
|
|
msgid "Too many processes"
|
|
msgstr "프로세스가 너무 많음"
|
|
|
|
#. TRANS ???
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:427
|
|
msgid "Too many references: cannot splice"
|
|
msgstr "참조가 너무 많음: 연결할 수 없습니다"
|
|
|
|
#. TRANS The file quota system is confused because there are too many users.
|
|
#. TRANS @c This can probably happen in a GNU system when using NFS.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:481
|
|
msgid "Too many users"
|
|
msgstr "사용자가 너무 많음"
|
|
|
|
msgid "Trace/breakpoint trap"
|
|
msgstr "추적/중단점 함정"
|
|
|
|
#: posix/regex.c:945
|
|
msgid "Trailing backslash"
|
|
msgstr "따라붙는 역슬래쉬"
|
|
|
|
#. TRANS In the GNU system, opening a file returns this error when the file is
|
|
#. TRANS translated by a program and the translator program dies while starting
|
|
#. TRANS up, before it has connected to the file.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:584
|
|
msgid "Translator died"
|
|
msgstr "번역기가 죽었음"
|
|
|
|
#. TRANS You tried to connect a socket that is already connected.
|
|
#. TRANS @xref{Connecting}.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:402
|
|
msgid "Transport endpoint is already connected"
|
|
msgstr "전송 종료지점이 이미 연결되어 있습니다"
|
|
|
|
#. TRANS The socket is not connected to anything. You get this error when you
|
|
#. TRANS try to transmit data over a socket, without first specifying a
|
|
#. TRANS destination for the data. For a connectionless socket (for datagram
|
|
#. TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead.
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:410
|
|
msgid "Transport endpoint is not connected"
|
|
msgstr "전송 종료지점이 연결되어 있지 않습니다"
|
|
|
|
#: catgets/gencat.c:208 db/makedb.c:209 locale/programs/locale.c:241
|
|
#: locale/programs/localedef.c:389
|
|
#, c-format
|
|
msgid "Try `%s --help' for more information.\n"
|
|
msgstr "더 많은 정보를 보려면 `%s --help' 하십시오.\n"
|
|
|
|
#: inet/rcmd.c:121
|
|
#, c-format
|
|
msgid "Trying %s...\n"
|
|
msgstr "%s 시도중...\n"
|
|
|
|
#: inet/ruserpass.c:246
|
|
#, c-format
|
|
msgid "Unknown .netrc keyword %s"
|
|
msgstr "알 수 없는 .netrc 키워드 %s"
|
|
|
|
#: string/../sysdeps/generic/_strerror.c:36
|
|
#: string/../sysdeps/mach/_strerror.c:58
|
|
msgid "Unknown error "
|
|
msgstr "알 수 없는 오류"
|
|
|
|
#: resolv/herror.c:74
|
|
msgid "Unknown host"
|
|
msgstr "알 수 없는 호스트"
|
|
|
|
#: resolv/herror.c:118
|
|
msgid "Unknown resolver error"
|
|
msgstr "알 수 없는 리솔버 오류"
|
|
|
|
#: resolv/herror.c:76
|
|
msgid "Unknown server error"
|
|
msgstr "알 수 없는 서버 오류"
|
|
|
|
#: string/strsignal.c:40
|
|
#, c-format
|
|
msgid "Unknown signal %d"
|
|
msgstr "알 수 없는 신호 %d"
|
|
|
|
#: misc/error.c:94
|
|
msgid "Unknown system error"
|
|
msgstr "알 수 없는 시스템 오류"
|
|
|
|
#: posix/regex.c:948
|
|
msgid "Unmatched ( or \\("
|
|
msgstr "짝이 맞지 않는 ( 또는 \\("
|
|
|
|
#: posix/regex.c:956
|
|
msgid "Unmatched ) or \\)"
|
|
msgstr "짝이 맞지 않는 ) 또는 \\)"
|
|
|
|
#: posix/regex.c:947
|
|
msgid "Unmatched [ or [^"
|
|
msgstr "짝이 맞지 않는 [ 또는 [^"
|
|
|
|
#: posix/regex.c:949
|
|
msgid "Unmatched \\{"
|
|
msgstr "짝이 맞지 않는 \\{"
|
|
|
|
#: posix/getconf.c:191
|
|
#, c-format
|
|
msgid "Unrecognized variable `%s'"
|
|
msgstr "인식할 수 없는 변수 `%s'"
|
|
|
|
msgid "Urgent I/O condition"
|
|
msgstr "시급한 입출력 상황"
|
|
|
|
#: catgets/gencat.c:212
|
|
#, c-format
|
|
msgid ""
|
|
"Usage: %s [OPTION]... -o OUTPUT-FILE [INPUT-FILE]...\n"
|
|
" %s [OPTION]... [OUTPUT-FILE [INPUT-FILE]...]\n"
|
|
"Mandatory arguments to long options are mandatory for short options too.\n"
|
|
" -H, --header create C header file containing symbol definitions\n"
|
|
" -h, --help display this help and exit\n"
|
|
" --new do not use existing catalog, force new output file\n"
|
|
" -o, --output=NAME write output to file NAME\n"
|
|
" -V, --version output version information and exit\n"
|
|
"If INPUT-FILE is -, input is read from standard input. If OUTPUT-FILE\n"
|
|
"is -, output is written to standard output.\n"
|
|
msgstr ""
|
|
"사용법: %s [옵션]... -o 출력-파일 [입력-파일]...\n"
|
|
" %s [옵션]... [출력-파일 [입력-파일]...]\n"
|
|
"긴 옵션에 부가되는 인수는 짧은 옵션에도 적용됩니다.\n"
|
|
" -H, --header 기호 정의를 포함하는 C 헤더 파일을 만듭니다\n"
|
|
" -h, --help 이 도움말을 표시하고 마칩니다\n"
|
|
" --new 존재하는 목록을 사용하지 않고 새 출력 파일을 쓰게 "
|
|
"합니다\n"
|
|
" -o, --output=NAME NAME이라는 파일에 출력을 기록합니다\n"
|
|
" -V, --version 버전 정보를 출력하고 마칩니다\n"
|
|
"입력-파일이 - 이면 표준 입력으로부터 입력을 읽게 됩니다. 출력-파일이\n"
|
|
"- 이면 표준 출력에 출력이 기록됩니다.\n"
|
|
|
|
#: db/makedb.c:213
|
|
#, c-format
|
|
msgid ""
|
|
"Usage: %s [OPTION]... INPUT-FILE OUTPUT-FILE\n"
|
|
" %s [OPTION]... -o OUTPUT-FILE INPUT-FILE\n"
|
|
" %s [OPTION]... -u INPUT-FILE\n"
|
|
"Mandatory arguments to long options are mandatory for short options too.\n"
|
|
" -f, --fold-case convert key to lower case\n"
|
|
" -h, --help display this help and exit\n"
|
|
" -o, --output=NAME write output to file NAME\n"
|
|
" --quiet don't print messages while building database\n"
|
|
" -u, --undo print content of database file, one entry a line\n"
|
|
" -V, --version output version information and exit\n"
|
|
"If INPUT-FILE is -, input is read from standard input.\n"
|
|
msgstr ""
|
|
"사용법: %s [옵션]... 입력-파일 출력-파일\n"
|
|
" %s [옵션]... -o 출력-파일 입력-파일\n"
|
|
" %s [옵션]... -u 입력-파일\n"
|
|
"긴 옵션에 부가되는 인수는 짧은 옵션에도 적용됩니다.\n"
|
|
" -f, --fold-case 키를 소문자로 변환합니다\n"
|
|
" -h, --help 이 도움말을 표시하고 마칩니다\n"
|
|
" -o, --output=NAME NAME이라는 파일에 출력을 기록합니다\n"
|
|
" --quiet 데이터베이스를 만드는 동안 메시지를 인쇄하지 않습니다\n"
|
|
" -u, --undo 데이터베이스 파일의 내용을 한 줄에 하나씩 출력합니다\n"
|
|
" -V, --version 버전 정보를 출력하고 마칩니다\n"
|
|
"입력-파일이 - 이면 표준 입력으로부터 입력을 읽게 됩니다.\n"
|
|
|
|
#: locale/programs/localedef.c:393
|
|
#, c-format
|
|
msgid ""
|
|
"Usage: %s [OPTION]... name\n"
|
|
"Mandatory arguments to long options are mandatory for short options too.\n"
|
|
" -c, --force create output even if warning messages were "
|
|
"issued\n"
|
|
" -h, --help display this help and exit\n"
|
|
" -f, --charmap=FILE symbolic character names defined in FILE\n"
|
|
" -i, --inputfile=FILE source definitions are found in FILE\n"
|
|
" -u, --code-set-name=NAME specify code set for mapping ISO 10646 elements\n"
|
|
" -v, --verbose print more messages\n"
|
|
" -V, --version output version information and exit\n"
|
|
" --posix be strictly POSIX conform\n"
|
|
"\n"
|
|
"System's directory for character maps: %s\n"
|
|
" locale files : %s\n"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locale.c:245
|
|
#, c-format
|
|
msgid ""
|
|
"Usage: %s [OPTION]... name\n"
|
|
"Mandatory arguments to long options are mandatory for short options too.\n"
|
|
" -h, --help display this help and exit\n"
|
|
" -V, --version output version information and exit\n"
|
|
"\n"
|
|
" -a, --all-locales write names of available locales\n"
|
|
" -m, --charmaps write names of available charmaps\n"
|
|
"\n"
|
|
" -c, --category-name write names of selected categories\n"
|
|
" -k, --keyword-name write names of selected keywords\n"
|
|
msgstr ""
|
|
|
|
#: posix/getconf.c:138
|
|
#, c-format
|
|
msgid "Usage: %s variable_name [pathname]\n"
|
|
msgstr "사용법: %s 변수명 [경로명]\n"
|
|
|
|
#: sunrpc/rpcinfo.c:609
|
|
msgid "Usage: rpcinfo [ -n portnum ] -u host prognum [ versnum ]\n"
|
|
msgstr "사용법: rpcinfo [ -n 포트번호 ] -u 호스트 프로그램번호 [ 버전번호 ]\n"
|
|
|
|
msgid "User defined signal 1"
|
|
msgstr "사용자 정의 신호 1"
|
|
|
|
msgid "User defined signal 2"
|
|
msgstr "사용자 신호 신호 2"
|
|
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:742
|
|
msgid "Value too large for defined data type"
|
|
msgstr ""
|
|
|
|
msgid "Virtual timer expired"
|
|
msgstr "가상 타이머의 시간이 초과됨"
|
|
|
|
#: time/zic.c:1844
|
|
msgid "Wild result from command execution"
|
|
msgstr ""
|
|
|
|
msgid "Window changed"
|
|
msgstr "윈도우 변경됨"
|
|
|
|
#: catgets/gencat.c:174 db/makedb.c:125 locale/programs/locale.c:192
|
|
#: locale/programs/localedef.c:182
|
|
#, c-format
|
|
msgid "Written by %s.\n"
|
|
msgstr ""
|
|
|
|
#. TRANS You did @strong{what}?
|
|
#: stdio-common/../sysdeps/gnu/errlist.c:596
|
|
msgid "You really blew it this time"
|
|
msgstr "이번엔 정말로 날려버렸습니다"
|
|
|
|
#: time/zic.c:1050
|
|
msgid "Zone continuation line end time is not after end time of previous line"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charmap.c:397 locale/programs/locfile.c:341
|
|
#, c-format
|
|
msgid "`%1$s' definition does not end with `END %1$s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-monetary.c:358 locale/programs/ld-numeric.c:190
|
|
#, c-format
|
|
msgid "`-1' must be last entry in `%s' field in `%s' category"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1651
|
|
msgid "`...' must only be used in `...' and `UNDEFINED' entries"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:538
|
|
msgid "`from' expected after first argument to `collating-element'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1108
|
|
msgid ""
|
|
"`from' string in collation element declaration contains unknown character"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charmap.c:267
|
|
#, c-format
|
|
msgid "argument to <%s> must be a single character"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:215
|
|
#, c-format
|
|
msgid "argument to `%s' must be a single character"
|
|
msgstr ""
|
|
|
|
#: sunrpc/auth_unix.c:322
|
|
msgid "auth_none.c - Fatal marshalling problem"
|
|
msgstr ""
|
|
|
|
#: inet/rcmd.c:330
|
|
msgid "bad .rhosts owner"
|
|
msgstr "잘못된 .rhosts 소유자"
|
|
|
|
#: locale/programs/charmap.c:212 locale/programs/locfile.c:209
|
|
msgid "bad argument"
|
|
msgstr "인수"
|
|
|
|
#: time/zic.c:1172
|
|
msgid "blank FROM field on Link line"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:1176
|
|
msgid "blank TO field on Link line"
|
|
msgstr ""
|
|
|
|
#: malloc/mcheck.c:189
|
|
msgid "block freed twice"
|
|
msgstr "블록이 두번 비워졌음"
|
|
|
|
#: malloc/mcheck.c:192
|
|
msgid "bogus mcheck_status, library is buggy"
|
|
msgstr "엉터리 mcheck_status, 라이브러리는 버그가 버글버글합니다"
|
|
|
|
#: sunrpc/pmap_rmt.c:179
|
|
msgid "broadcast: ioctl (get interface configuration)"
|
|
msgstr ""
|
|
|
|
#: sunrpc/pmap_rmt.c:186
|
|
msgid "broadcast: ioctl (get interface flags)"
|
|
msgstr ""
|
|
|
|
#: sunrpc/svc_udp.c:402
|
|
msgid "cache_set: victim not found"
|
|
msgstr "cache_set: 버릴것을 찾지 못했음"
|
|
|
|
#: time/zic.c:1685
|
|
msgid "can't determine time zone abbrevation to use just after until time"
|
|
msgstr ""
|
|
|
|
#: sunrpc/svc_simple.c:64
|
|
#, c-format
|
|
msgid "can't reassign procedure number %d\n"
|
|
msgstr "프로시져 번호 %d를 재지정할 수 없습니다\n"
|
|
|
|
#: locale/programs/localedef.c:287
|
|
#, c-format
|
|
msgid "cannot `stat' locale file `%s'"
|
|
msgstr "로케일 파일 `%s'를 `stat'할 수 없습니다"
|
|
|
|
#: locale/programs/ld-collate.c:1313
|
|
#, c-format
|
|
msgid "cannot insert collation element `%.*s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1492 locale/programs/ld-collate.c:1497
|
|
msgid "cannot insert into result table"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1165 locale/programs/ld-collate.c:1207
|
|
#, c-format
|
|
msgid "cannot insert new collating symbol definition: %s"
|
|
msgstr ""
|
|
|
|
#: db/makedb.c:161
|
|
#, c-format
|
|
msgid "cannot open database file `%s': %s"
|
|
msgstr "데이터베이스 파일 `%s'를 열 수 없습니다: %s"
|
|
|
|
#: catgets/gencat.c:259 db/makedb.c:180
|
|
#, c-format
|
|
msgid "cannot open input file `%s'"
|
|
msgstr "입력 파일 `%s'를 열 수 없습니다"
|
|
|
|
#: locale/programs/localedef.c:221
|
|
#, c-format
|
|
msgid "cannot open locale definition file `%s'"
|
|
msgstr "로케일 정의 파일 `%s'를 열 수 없습니다"
|
|
|
|
#: catgets/gencat.c:764 catgets/gencat.c:805 db/makedb.c:189
|
|
#, c-format
|
|
msgid "cannot open output file `%s'"
|
|
msgstr "출력 파일 `%s'를 열 수 없습니다"
|
|
|
|
#: locale/programs/locfile.c:986
|
|
#, c-format
|
|
msgid "cannot open output file `%s' for category `%s'"
|
|
msgstr "출력 파일 `%s'를 범주 `%s'에 대해 열 수 없습니다"
|
|
|
|
#: locale/programs/ld-collate.c:1359
|
|
msgid "cannot process order specification"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locale.c:303
|
|
#, c-format
|
|
msgid "cannot read character map directory `%s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locale.c:278
|
|
#, c-format
|
|
msgid "cannot read locale directory `%s'"
|
|
msgstr "로케일 디렉토리 `%s'를 읽을 수 없습니다"
|
|
|
|
#: locale/programs/localedef.c:309
|
|
#, c-format
|
|
msgid "cannot read locale file `%s'"
|
|
msgstr "로케일 파일 `%s'를 열 수 없습니다"
|
|
|
|
#: locale/programs/localedef.c:334
|
|
#, c-format
|
|
msgid "cannot write output files to `%s'"
|
|
msgstr "출력 파일을 `%s'에 기록할 수 없습니다"
|
|
|
|
#: locale/programs/localedef.c:377
|
|
msgid "category data requested more than once: should not happen"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-ctype.c:265
|
|
#, c-format
|
|
msgid "character %s'%s' in class `%s' must be in class `%s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-ctype.c:289
|
|
#, c-format
|
|
msgid "character %s'%s' in class `%s' must not be in class `%s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-ctype.c:310
|
|
msgid "character <SP> not defined in character map"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-ctype.c:1141
|
|
#, c-format
|
|
msgid "character `%c' not defined while needed as default value"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-ctype.c:939 locale/programs/ld-ctype.c:1002
|
|
#: locale/programs/ld-ctype.c:1010 locale/programs/ld-ctype.c:1018
|
|
#: locale/programs/ld-ctype.c:1026 locale/programs/ld-ctype.c:1034
|
|
#: locale/programs/ld-ctype.c:1042 locale/programs/ld-ctype.c:1068
|
|
#: locale/programs/ld-ctype.c:1076 locale/programs/ld-ctype.c:1114
|
|
#: locale/programs/ld-ctype.c:1152
|
|
#, c-format
|
|
msgid "character `%s' not defined while needed as default value"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-ctype.c:801
|
|
#, c-format
|
|
msgid "character class `%s' already defined"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-ctype.c:833
|
|
#, c-format
|
|
msgid "character map `%s' already defined"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charmap.c:76
|
|
#, c-format
|
|
msgid "character map file `%s' not found"
|
|
msgstr ""
|
|
|
|
#: sunrpc/clnt_raw.c:106
|
|
msgid "clnt_raw.c - Fatal header serialization error."
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1328
|
|
#, c-format
|
|
msgid "collation element `%.*s' appears more than once: ignore line"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1346
|
|
msgid "collation symbol `.*s' appears more than once: ignore line"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:522
|
|
#, c-format
|
|
msgid "collation symbol expected after `%s'"
|
|
msgstr ""
|
|
|
|
#: inet/rcmd.c:114
|
|
#, c-format
|
|
msgid "connect to address %s: "
|
|
msgstr "주소 %s에 연결: "
|
|
|
|
#: sunrpc/svc_simple.c:70
|
|
msgid "couldn't create an rpc server\n"
|
|
msgstr "rpc 서버를 만들 수 없습니다\n"
|
|
|
|
#: sunrpc/portmap.c:121
|
|
msgid "couldn't do tcp_create\n"
|
|
msgstr "tcp_create를 할 수 없습니다\n"
|
|
|
|
#: sunrpc/portmap.c:99
|
|
msgid "couldn't do udp_create\n"
|
|
msgstr "udp_create를 할 수 없습니다\n"
|
|
|
|
#: sunrpc/svc_simple.c:77
|
|
#, c-format
|
|
msgid "couldn't register prog %d vers %d\n"
|
|
msgstr "프로그램 %d 버전 %d를 등록할 수 없습니다\n"
|
|
|
|
#: locale/programs/charmap.c:86
|
|
#, c-format
|
|
msgid "default character map file `%s' not found"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-time.c:154
|
|
#, c-format
|
|
msgid ""
|
|
"direction flag in string %d in `era' field in category `%s' is not '+' nor "
|
|
"'-'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-time.c:164
|
|
#, c-format
|
|
msgid ""
|
|
"direction flag in string %d in `era' field in category `%s' is not a single "
|
|
"character"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charset.c:87 locale/programs/charset.c:132
|
|
#, c-format
|
|
msgid "duplicate character name `%s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1140
|
|
msgid "duplicate collating element definition"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1286
|
|
#, c-format
|
|
msgid "duplicate definition for character `%.*s'"
|
|
msgstr ""
|
|
|
|
#: db/makedb.c:310
|
|
msgid "duplicate key"
|
|
msgstr ""
|
|
|
|
#: catgets/gencat.c:378
|
|
msgid "duplicate set definition"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:965
|
|
#, c-format
|
|
msgid "duplicate zone name %s (file \"%s\", line %d)"
|
|
msgstr ""
|
|
|
|
#: catgets/gencat.c:541
|
|
msgid "duplicated message identifier"
|
|
msgstr "중복된 메시지 식별자"
|
|
|
|
#: catgets/gencat.c:514
|
|
msgid "duplicated message number"
|
|
msgstr "중복된 메시지 번호"
|
|
|
|
#: locale/programs/ld-collate.c:1695
|
|
msgid "empty weight name: line ignored"
|
|
msgstr ""
|
|
|
|
#: sunrpc/svc_udp.c:348
|
|
msgid "enablecache: cache already enabled"
|
|
msgstr "enablecache: 캐쉬가 이미 활성화되어 있음"
|
|
|
|
#: sunrpc/svc_udp.c:353
|
|
msgid "enablecache: could not allocate cache"
|
|
msgstr "enablecache: 캐쉬를 할당할 수 없습니다"
|
|
|
|
#: sunrpc/svc_udp.c:360
|
|
msgid "enablecache: could not allocate cache data"
|
|
msgstr "enablecache: 캐쉬 자료를 할당할 수 없습니다"
|
|
|
|
#: sunrpc/svc_udp.c:366
|
|
msgid "enablecache: could not allocate cache fifo"
|
|
msgstr "enablecache: 캐쉬 fifo를 할당할 수 없습니다"
|
|
|
|
#: locale/programs/ld-collate.c:1418
|
|
msgid "end point of ellipsis range is bigger then start"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1148
|
|
msgid "error while inserting collation element into hash table"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1160
|
|
msgid "error while inserting to hash table"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:465
|
|
msgid "expect string argument for `copy'"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:856
|
|
msgid "expected continuation line not found"
|
|
msgstr "예상했던 연속 행을 찾지 못했음"
|
|
|
|
#: locale/programs/locfile.c:1010
|
|
#, c-format
|
|
msgid "failure while writing data for category `%s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-monetary.c:154 locale/programs/ld-numeric.c:95
|
|
#, c-format
|
|
msgid "field `%s' in category `%s' not defined"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-messages.c:81 locale/programs/ld-messages.c:102
|
|
#, c-format
|
|
msgid "field `%s' in category `%s' undefined"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:547
|
|
msgid "from-value of `collating-element' must be a string"
|
|
msgstr ""
|
|
|
|
#: locale/programs/linereader.c:328
|
|
msgid "garbage at end of character code specification"
|
|
msgstr ""
|
|
|
|
#: locale/programs/linereader.c:214
|
|
msgid "garbage at end of digit"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-time.c:183
|
|
#, c-format
|
|
msgid ""
|
|
"garbage at end of offset value in string %d in `era' field in category `%s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-time.c:238
|
|
#, c-format
|
|
msgid ""
|
|
"garbage at end of starting date in string %d in `era' field in category `%s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-time.c:310
|
|
#, c-format
|
|
msgid ""
|
|
"garbage at end of stopping date in string %d in `era' field in category `%s'"
|
|
msgstr ""
|
|
|
|
#: sunrpc/get_myaddr.c:73
|
|
msgid "get_myaddress: ioctl (get interface configuration)"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:1149
|
|
msgid "illegal CORRECTION field on Leap line"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:1153
|
|
msgid "illegal Rolling/Stationary field on Leap line"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1766
|
|
msgid "illegal character constant in string"
|
|
msgstr "문자열에 잘못된 문자 상수가 있음"
|
|
|
|
#: locale/programs/ld-collate.c:1115
|
|
msgid "illegal collation element"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charmap.c:196
|
|
msgid "illegal definition"
|
|
msgstr "정의가 잘못되었음"
|
|
|
|
#: locale/programs/charmap.c:349
|
|
msgid "illegal encoding given"
|
|
msgstr "잘못된 부호화가 주어짐"
|
|
|
|
#: locale/programs/linereader.c:546
|
|
msgid "illegal escape sequence at end of string"
|
|
msgstr "문자열 끝에 잘못된 이스케이프 열이 있음"
|
|
|
|
#: locale/programs/charset.c:101
|
|
msgid "illegal names for character range"
|
|
msgstr "문자의 범위로 잘못된 이름"
|
|
|
|
#: locale/programs/ld-time.c:176
|
|
#, c-format
|
|
msgid "illegal number for offset in string %d in `era' field in category `%s'"
|
|
msgstr ""
|
|
|
|
#: catgets/gencat.c:351 catgets/gencat.c:428
|
|
msgid "illegal set number"
|
|
msgstr "집합 번호가 잘못되었음"
|
|
|
|
#: locale/programs/ld-time.c:230
|
|
#, c-format
|
|
msgid "illegal starting date in string %d in `era' field in category `%s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-time.c:302
|
|
#, c-format
|
|
msgid "illegal stopping date in string %d in `era' field in category `%s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-ctype.c:807
|
|
#, c-format
|
|
msgid "implementation limit: no more than %d character classes allowed"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-ctype.c:839
|
|
#, c-format
|
|
msgid "implementation limit: no more than %d character maps allowed"
|
|
msgstr ""
|
|
|
|
#: db/makedb.c:163
|
|
msgid "incorrectly formatted file"
|
|
msgstr "잘못된 형식을 갖춘 파일"
|
|
|
|
#: time/zic.c:814
|
|
msgid "input line of unknown type"
|
|
msgstr "알 수 없는 형태의 입력행"
|
|
|
|
#: time/zic.c:1733
|
|
msgid "internal error - addtype called with bad isdst"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:1741
|
|
msgid "internal error - addtype called with bad ttisgmt"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:1737
|
|
msgid "internal error - addtype called with bad ttisstd"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-ctype.c:301
|
|
#, c-format
|
|
msgid "internal error in %s, line %u"
|
|
msgstr "%s, 행 %u에 내부 오류 발생"
|
|
|
|
#: time/zic.c:1021
|
|
msgid "invalid GMT offset"
|
|
msgstr "GMT 옵셋이 부적절함"
|
|
|
|
#: time/zic.c:1024
|
|
msgid "invalid abbreviation format"
|
|
msgstr "약어 형식이 부적절함"
|
|
|
|
#: time/zic.c:1114 time/zic.c:1313 time/zic.c:1327
|
|
msgid "invalid day of month"
|
|
msgstr "달의 날짜 수가 부적절함"
|
|
|
|
#: time/zic.c:1272
|
|
msgid "invalid ending year"
|
|
msgstr "끝나는 해가 부적절함"
|
|
|
|
#: time/zic.c:1086
|
|
msgid "invalid leaping year"
|
|
msgstr "부적절한 윤년"
|
|
|
|
#: time/zic.c:1101 time/zic.c:1204
|
|
msgid "invalid month name"
|
|
msgstr "달 이름이 부적절함"
|
|
|
|
#: time/zic.c:920
|
|
msgid "invalid saved time"
|
|
msgstr "절약 시간이 부적절함"
|
|
|
|
#: time/zic.c:1252
|
|
msgid "invalid starting year"
|
|
msgstr "시작하는 해가 부적절함"
|
|
|
|
#: time/zic.c:1130 time/zic.c:1232
|
|
msgid "invalid time of day"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:1318
|
|
msgid "invalid weekday name"
|
|
msgstr "부적절한 요일 이름"
|
|
|
|
#: locale/programs/ld-collate.c:1411
|
|
msgid "line after ellipsis must contain character definition"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1390
|
|
msgid "line before ellipsis does not contain definition for character constant"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:794
|
|
msgid "line too long"
|
|
msgstr "행이 너무 깁니다"
|
|
|
|
#: locale/programs/localedef.c:281
|
|
#, c-format
|
|
msgid "locale file `%s', used in `copy' statement, not found"
|
|
msgstr ""
|
|
|
|
#: catgets/gencat.c:609
|
|
msgid "malformed line ignored"
|
|
msgstr "잘못된 형태를 가진 행은 무시됨"
|
|
|
|
#: malloc/mcheck.c:183
|
|
msgid "memory clobbered before allocated block"
|
|
msgstr ""
|
|
|
|
#: malloc/mcheck.c:186
|
|
msgid "memory clobbered past end of allocated block"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:167 locale/programs/ld-collate.c:173
|
|
#: locale/programs/ld-collate.c:177 locale/programs/ld-collate.c:1438
|
|
#: locale/programs/ld-collate.c:1467 locale/programs/locfile.c:940
|
|
#: locale/programs/xmalloc.c:68 posix/getconf.c:181
|
|
msgid "memory exhausted"
|
|
msgstr "메모리가 바닥남"
|
|
|
|
#: malloc/mcheck.c:180
|
|
msgid "memory is consistent, library is buggy"
|
|
msgstr "메모리는 견고하지만, 라이브러리는 버그가 많습니다"
|
|
|
|
#: locale/programs/ld-time.c:348
|
|
#, c-format
|
|
msgid "missing era format in string %d in `era' field in category `%s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-time.c:337
|
|
#, c-format
|
|
msgid "missing era name in string %d in `era' fieldin category `%s'"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:915
|
|
msgid "nameless rule"
|
|
msgstr "이름없는 규칙"
|
|
|
|
#: sunrpc/svc_simple.c:140
|
|
#, c-format
|
|
msgid "never registered prog %d\n"
|
|
msgstr "결코 등록되지 않은 프로그램 %d\n"
|
|
|
|
#: locale/programs/ld-messages.c:95 locale/programs/ld-messages.c:116
|
|
#, c-format
|
|
msgid "no correct regular expression for field `%s' in category `%s': %s"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:2059
|
|
msgid "no day in month matches rule"
|
|
msgstr "규칙에 부합되는 날이 달 안에 없음"
|
|
|
|
#: locale/programs/ld-collate.c:259
|
|
msgid "no definition of `UNDEFINED'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:479
|
|
msgid "no other keyword shall be specified when `copy' is used"
|
|
msgstr ""
|
|
|
|
#: locale/programs/localedef.c:340
|
|
msgid "no output file produced because warning were issued"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charmap.c:315 locale/programs/charmap.c:466
|
|
#: locale/programs/charmap.c:545
|
|
msgid "no symbolic name given"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charmap.c:380 locale/programs/charmap.c:512
|
|
#: locale/programs/charmap.c:578
|
|
msgid "no symbolic name given for end of range"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:244
|
|
#, c-format
|
|
msgid "no weight defined for symbol `%s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charmap.c:430
|
|
msgid "only WIDTH definitions are allowed to follow the CHARMAP definition"
|
|
msgstr ""
|
|
|
|
#: sunrpc/portmap.c:451
|
|
msgid "portmap CALLIT: cannot fork.\n"
|
|
msgstr ""
|
|
|
|
#: sunrpc/portmap.c:94 sunrpc/portmap.c:116
|
|
msgid "portmap cannot bind"
|
|
msgstr ""
|
|
|
|
#: sunrpc/portmap.c:86 sunrpc/portmap.c:112
|
|
msgid "portmap cannot create socket"
|
|
msgstr "포트맵이 소켓을 만들 수 없습니다"
|
|
|
|
#: db/makedb.c:326
|
|
#, c-format
|
|
msgid "problems while reading `%s'"
|
|
msgstr ""
|
|
|
|
#: sunrpc/rpcinfo.c:222 sunrpc/rpcinfo.c:350
|
|
#, c-format
|
|
msgid "program %lu is not available\n"
|
|
msgstr "프로그램 %lu는 사용 불가능합니다\n"
|
|
|
|
#: sunrpc/rpcinfo.c:245 sunrpc/rpcinfo.c:282 sunrpc/rpcinfo.c:371
|
|
#: sunrpc/rpcinfo.c:408 sunrpc/rpcinfo.c:429 sunrpc/rpcinfo.c:462
|
|
#, c-format
|
|
msgid "program %lu version %lu is not available\n"
|
|
msgstr "프로그램 %lu 버전 %lu는 사용 불가능합니다\n"
|
|
|
|
#: sunrpc/rpcinfo.c:466
|
|
#, c-format
|
|
msgid "program %lu version %lu ready and waiting\n"
|
|
msgstr "프로그램 %lu 버전 %lu는 준비되어 기다리고 있습니다\n"
|
|
|
|
#: inet/rcmd.c:157
|
|
#, c-format
|
|
msgid "rcmd: select (setting up stderr): %s\n"
|
|
msgstr "rcmd: 선택 (표준오류 설정): %s\n"
|
|
|
|
#: inet/rcmd.c:87
|
|
msgid "rcmd: socket: All ports in use\n"
|
|
msgstr "rcmd: socket: 모든 포트가 사용중\n"
|
|
|
|
#: inet/rcmd.c:144
|
|
#, c-format
|
|
msgid "rcmd: write (setting up stderr): %s\n"
|
|
msgstr "rcmd: 쓰기 (표준오류 설정): %s\n"
|
|
|
|
#: sunrpc/svc_simple.c:83
|
|
msgid "registerrpc: out of memory\n"
|
|
msgstr "registerrpc: 메모리 부족\n"
|
|
|
|
#: time/zic.c:1794
|
|
msgid "repeated leap second moment"
|
|
msgstr ""
|
|
|
|
#: sunrpc/rpcinfo.c:659
|
|
#, c-format
|
|
msgid "rpcinfo: %s is unknown host\n"
|
|
msgstr "rpcinfo: %s는 알 수 없는 호스트입니다\n"
|
|
|
|
#: sunrpc/rpcinfo.c:626
|
|
#, c-format
|
|
msgid "rpcinfo: %s is unknown service\n"
|
|
msgstr "rpcinfo: %s는 알 수 없는 서비스입니다\n"
|
|
|
|
#: sunrpc/rpcinfo.c:600
|
|
#, c-format
|
|
msgid "rpcinfo: Could not delete registration for prog %s version %s\n"
|
|
msgstr "rpcinfo: 프로그램 %s 버전 %s의 등록을 지울 수 없습니다\n"
|
|
|
|
#: sunrpc/rpcinfo.c:576
|
|
#, c-format
|
|
msgid "rpcinfo: broadcast failed: %s\n"
|
|
msgstr "rpcinfo: 브로드캐스트 실패함: %s\n"
|
|
|
|
#: sunrpc/rpcinfo.c:505
|
|
msgid "rpcinfo: can't contact portmapper"
|
|
msgstr "rpcinfo: 포트매퍼에 연결할 수 없습니다"
|
|
|
|
#: sunrpc/rpcinfo.c:510
|
|
msgid "rpcinfo: can't contact portmapper: "
|
|
msgstr "rpcinfo: 포트매퍼에 연결할 수 없습니다: "
|
|
|
|
#: sunrpc/portmap.c:137
|
|
msgid "run_svc returned unexpectedly\n"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:708 time/zic.c:710
|
|
msgid "same rule name in multiple files"
|
|
msgstr ""
|
|
|
|
#: inet/rcmd.c:161
|
|
msgid "select: protocol failure in circuit setup\n"
|
|
msgstr "select: 회로 설정중 규약이 불이행됨\n"
|
|
|
|
#: inet/rcmd.c:179
|
|
msgid "socket: protocol failure in circuit setup\n"
|
|
msgstr "socket: 회로 설정중 규약이 불이행됨\n"
|
|
|
|
#: locale/programs/locfile.c:600
|
|
msgid "sorting order `forward' and `backward' are mutually exclusive"
|
|
msgstr "정렬 순서 `forward'와 `backward'는 서로 배타적입니다"
|
|
|
|
#: locale/programs/ld-collate.c:1567 locale/programs/ld-collate.c:1613
|
|
msgid ""
|
|
"specification of sorting weight for collation symbol does not make sense"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:779
|
|
msgid "standard input"
|
|
msgstr "표준 입력"
|
|
|
|
#: time/zdump.c:260
|
|
msgid "standard output"
|
|
msgstr "표준 출력"
|
|
|
|
#: locale/programs/ld-time.c:256
|
|
#, c-format
|
|
msgid "starting date is illegal in string %d in `era' field in category `%s'"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:1276
|
|
msgid "starting year greater than ending year"
|
|
msgstr "시작하는 해가 끝나는 해보다 큽니다"
|
|
|
|
#: locale/programs/ld-time.c:328
|
|
#, c-format
|
|
msgid "stopping date is illegal in string %d in `era' field in category `%s'"
|
|
msgstr ""
|
|
|
|
#: sunrpc/svc_tcp.c:201 sunrpc/svc_tcp.c:206
|
|
msgid "svc_tcp: makefd_xprt: out of memory\n"
|
|
msgstr "svc_tcp: makefc_xprt: 메모리 부족\n"
|
|
|
|
#: sunrpc/svc_tcp.c:149
|
|
msgid "svctcp_.c - cannot getsockname or listen"
|
|
msgstr ""
|
|
|
|
#: sunrpc/svc_tcp.c:136
|
|
msgid "svctcp_.c - udp socket creation problem"
|
|
msgstr "svctcp_.c - udp 소켓 생성 문제"
|
|
|
|
#: sunrpc/svc_tcp.c:156 sunrpc/svc_tcp.c:163
|
|
msgid "svctcp_create: out of memory\n"
|
|
msgstr "svctcp_create: 메모리 부족\n"
|
|
|
|
#: sunrpc/svc_udp.c:123
|
|
msgid "svcudp_create - cannot getsockname"
|
|
msgstr "svcudp_create - getsockname 불가능"
|
|
|
|
#: sunrpc/svc_udp.c:111
|
|
msgid "svcudp_create: socket creation problem"
|
|
msgstr "svcudp_create: 소켓 생성 문제"
|
|
|
|
#: locale/programs/ld-collate.c:1190
|
|
#, c-format
|
|
msgid ""
|
|
"symbol for multicharacter collating element `%.*s' duplicates element "
|
|
"definition"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1063
|
|
#, c-format
|
|
msgid ""
|
|
"symbol for multicharacter collating element `%.*s' duplicates other element "
|
|
"definition"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1199
|
|
#, c-format
|
|
msgid ""
|
|
"symbol for multicharacter collating element `%.*s' duplicates other symbol "
|
|
"definition"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1072
|
|
#, c-format
|
|
msgid ""
|
|
"symbol for multicharacter collating element `%.*s' duplicates symbol "
|
|
"definition"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1054 locale/programs/ld-collate.c:1181
|
|
#, c-format
|
|
msgid ""
|
|
"symbol for multicharacter collating element `%.*s' duplicates symbolic name "
|
|
"in charset"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charmap.c:314 locale/programs/charmap.c:348
|
|
#: locale/programs/charmap.c:378 locale/programs/charmap.c:465
|
|
#: locale/programs/charmap.c:511 locale/programs/charmap.c:544
|
|
#: locale/programs/charmap.c:576
|
|
#, c-format
|
|
msgid "syntax error in %s definition: %s"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:620
|
|
msgid "syntax error in `order_start' directive"
|
|
msgstr "`order_start' 지시자에 문법 오류 있음"
|
|
|
|
#: locale/programs/locfile.c:362
|
|
msgid "syntax error in character class definition"
|
|
msgstr "문자 클래스 정의에 문법 오류 있음"
|
|
|
|
#: locale/programs/locfile.c:420
|
|
msgid "syntax error in character conversion definition"
|
|
msgstr "문자 변환 정의에 문법 오류 있음"
|
|
|
|
#: locale/programs/locfile.c:662
|
|
msgid "syntax error in collating order definition"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:512
|
|
msgid "syntax error in collation definition"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:335
|
|
msgid "syntax error in definition of LC_CTYPE category"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:278
|
|
msgid "syntax error in definition of new character class"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:288
|
|
msgid "syntax error in definition of new character map"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:873
|
|
msgid "syntax error in message locale definition"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:784
|
|
msgid "syntax error in monetary locale definition"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:811
|
|
msgid "syntax error in numeric locale definition"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:722
|
|
msgid "syntax error in order specification"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charmap.c:195 locale/programs/charmap.c:211
|
|
#, c-format
|
|
msgid "syntax error in prolog: %s"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:849
|
|
msgid "syntax error in time locale definition"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:255
|
|
msgid "syntax error: not inside a locale definition section"
|
|
msgstr ""
|
|
|
|
#: catgets/gencat.c:380 catgets/gencat.c:516 catgets/gencat.c:543
|
|
msgid "this is the first definition"
|
|
msgstr "이것은 첫번째 정의입니다"
|
|
|
|
#: time/zic.c:1119
|
|
msgid "time before zero"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:1127 time/zic.c:1959 time/zic.c:1978
|
|
msgid "time overflow"
|
|
msgstr "시간 흘러넘침"
|
|
|
|
#: locale/programs/charset.c:44
|
|
msgid "too few bytes in character encoding"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charset.c:46
|
|
msgid "too many bytes in character encoding"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locales.h:72
|
|
msgid "too many character classes defined"
|
|
msgstr "문자 클래스가 너무 많이 정의되었음"
|
|
|
|
#: time/zic.c:1788
|
|
msgid "too many leap seconds"
|
|
msgstr "윤초가 너무 많음"
|
|
|
|
#: time/zic.c:1760
|
|
msgid "too many local time types"
|
|
msgstr "지역시의 종류가 너무 많음"
|
|
|
|
#: time/zic.c:1714
|
|
msgid "too many transitions?!"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-collate.c:1622
|
|
msgid "too many weights"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:2082
|
|
msgid "too many, or too long, time zone abbreviations"
|
|
msgstr ""
|
|
|
|
#: locale/programs/linereader.h:146
|
|
msgid "trailing garbage at end of line"
|
|
msgstr ""
|
|
|
|
#: sunrpc/svc_simple.c:132
|
|
#, c-format
|
|
msgid "trouble replying to prog %d\n"
|
|
msgstr "프로그램 %d에 응답하는 데 문제가 있음\n"
|
|
|
|
#: locale/programs/ld-collate.c:1382
|
|
msgid "two lines in a row containing `...' are not allowed"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:1283
|
|
msgid "typed single year"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charmap.c:617 locale/programs/charmap.c:628
|
|
#, c-format
|
|
msgid "unknown character `%s'"
|
|
msgstr "알 수 없는 문자 `%s'"
|
|
|
|
#: locale/programs/ld-messages.c:193 locale/programs/ld-messages.c:204
|
|
#: locale/programs/ld-messages.c:215 locale/programs/ld-messages.c:226
|
|
#: locale/programs/ld-time.c:696
|
|
#, c-format
|
|
msgid "unknown character in field `%s' of category `%s'"
|
|
msgstr ""
|
|
|
|
#: locale/programs/locfile.c:585
|
|
msgid "unknown collation directive"
|
|
msgstr ""
|
|
|
|
#: catgets/gencat.c:477
|
|
#, c-format
|
|
msgid "unknown directive `%s': line ignored"
|
|
msgstr "알 수 없는 지시자 `%s': 행 무시됨"
|
|
|
|
#: catgets/gencat.c:456
|
|
#, c-format
|
|
msgid "unknown set `%s'"
|
|
msgstr "알 수 없는 설정 `%s'"
|
|
|
|
msgid "unknown signal"
|
|
msgstr "알 수 없는 신호"
|
|
|
|
#: locale/programs/ld-collate.c:1366 locale/programs/ld-collate.c:1557
|
|
#: locale/programs/ld-collate.c:1731
|
|
#, c-format
|
|
msgid "unknown symbol `%.*s': line ignored"
|
|
msgstr "알 수 없는 기호 `%.*s': 행 무시됨"
|
|
|
|
#: time/zic.c:751
|
|
msgid "unruly zone"
|
|
msgstr ""
|
|
|
|
#: catgets/gencat.c:961
|
|
msgid "unterminated message"
|
|
msgstr "종료되지 않은 메시지"
|
|
|
|
#: locale/programs/linereader.c:515 locale/programs/linereader.c:550
|
|
msgid "unterminated string"
|
|
msgstr "종료되지 않은 문자열"
|
|
|
|
#: locale/programs/linereader.c:385
|
|
msgid "unterminated symbolic name"
|
|
msgstr "종료되지 않은 기호 이름"
|
|
|
|
#: locale/programs/ld-collate.c:1684
|
|
msgid "unterminated weight name"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charset.c:119
|
|
msgid "upper limit in range is not smaller then lower limit"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:2025
|
|
msgid "use of 2/29 in non leap-year"
|
|
msgstr "평년에 2월 29일을 사용함"
|
|
|
|
#: locale/programs/charmap.c:438 locale/programs/charmap.c:492
|
|
#, c-format
|
|
msgid "value for %s must be an integer"
|
|
msgstr "%s에 대한 값은 정수여야 합니다"
|
|
|
|
#: locale/programs/charmap.c:233
|
|
#, c-format
|
|
msgid "value for <%s> must lie between 1 and 4"
|
|
msgstr "<%s>에 대한 값은 1과 4 사이에 있어야 합니다"
|
|
|
|
#: locale/programs/ld-monetary.c:148 locale/programs/ld-numeric.c:89
|
|
#, c-format
|
|
msgid "value for field `%s' in category `%s' must not be the empty string"
|
|
msgstr ""
|
|
|
|
#: locale/programs/charmap.c:245
|
|
msgid "value of <mb_cur_max> must be greater than the value of <mb_cur_min>"
|
|
msgstr "<mb_cur_max>의 값은 <mb_cur_min>의 값보다 커야 합니다"
|
|
|
|
#: locale/programs/ld-monetary.c:138
|
|
msgid ""
|
|
"value of field `int_curr_symbol' in category `LC_MONETARY' does not "
|
|
"correspond to a valid name in ISO 4217"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-monetary.c:133
|
|
msgid ""
|
|
"value of field `int_curr_symbol' in category `LC_MONETARY' has wrong length"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-monetary.c:370 locale/programs/ld-numeric.c:199
|
|
#, c-format
|
|
msgid "values for field `%s' in category `%s' must be smaller than 127"
|
|
msgstr ""
|
|
|
|
#: locale/programs/ld-monetary.c:366
|
|
#, c-format
|
|
msgid "values for field `%s' in category `%s' must not be zero"
|
|
msgstr ""
|
|
|
|
#: login/setutent_r.c:47
|
|
msgid "while opening UTMP file"
|
|
msgstr "UTMP 파일을 여는 동안"
|
|
|
|
#: catgets/gencat.c:988
|
|
msgid "while opening old catalog file"
|
|
msgstr "오래된 목록 파일을 여는 동안"
|
|
|
|
#: db/makedb.c:353
|
|
msgid "while reading database"
|
|
msgstr "데이터베이스를 읽는 동안"
|
|
|
|
#: db/makedb.c:315
|
|
msgid "while writing data base file"
|
|
msgstr "데이터 베이스 파일을 쓰는 동안"
|
|
|
|
#: db/makedb.c:142
|
|
msgid "wrong number of arguments"
|
|
msgstr "인수의 개수가 잘못되었음"
|
|
|
|
#: time/zic.c:1077
|
|
msgid "wrong number of fields on Leap line"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:1168
|
|
msgid "wrong number of fields on Link line"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:911
|
|
msgid "wrong number of fields on Rule line"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:981
|
|
msgid "wrong number of fields on Zone continuation line"
|
|
msgstr ""
|
|
|
|
#: time/zic.c:939
|
|
msgid "wrong number of fields on Zone line"
|
|
msgstr ""
|