mirror of
git://sourceware.org/git/glibc.git
synced 2024-12-09 04:11:27 +08:00
739d440d2a
2002-07-19 Ulrich Drepper <drepper@redhat.com> * configure.in: Add test for __thread support in compiler. * config.h.in: Add HAVE___THREAD. * Makefile (headers): Remove errno.h, sys/errno.h, and bits/errno.h. * include/sys/errno.h: Moved to... * stdlib/sys/errno.h: ...here. New file. * stdlib/errno.h: New file. Moved from... * include/errno.h: ...here. Changed into an internal header defining libc-local things like __set_errno. * stdlib/Makefile (headers): Add errno.h, sys/errno.h, and bits/errno.h. * elf/dl-minimal.c: Include <tls.h>. Define errno as thread-local variable if USE_TLS && HAVE___THREAD. Don't define __errno_location either. * elf/rtld.c (_dl_start): Add code to initialize TLS for ld.so from... (_dl_start_final): ...here. Add code to initialize tls elements from bootstrap_map. * sysdeps/generic/errno-loc.c: Define errno as thread-local variable if USE_TLS && HAVE___THREAD. * sysdeps/generic/bits/errno.h: Remove __set_errno definition. * sysdeps/mach/hurd/bits/errno.h: Likewise. * sysdeps/standalone/arm/bits/errno.h: Likewise. * sysdeps/standalone/bits/errno.h: Likewise. * sysdeps/unix/bsd/bsd4.4/bits/errno.h: Likewise. * sysdeps/unix/sysv/aix/bits/errno.h: Likewise. * sysdeps/unix/sysv/hpux/bits/errno.h: Likewise. * sysdeps/unix/sysv/linux/bits/errno.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/errno.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/errno.h: Likewise. * sysdeps/unix/sysv/sysv4/solaris2/bits/errno.h: Likewise. * sysdeps/i386/dl-machine.c (elf_machine_rel) [RTLD_BOOTSTRAP]: Don't use GL(dl_rtld_map), use map parameter. * sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/unix/sysv/linux/i386/sysdep.S: Define errno in .tbss if USE_TLS && HAVE___THREAD. * sysdeps/unix/sysv/linux/i386/sysdep.h: Unify SETUP_PIC_REG definitions. If USE_TLS && HAVE___THREAD store errooor value using TLS code sequence. * sysdeps/unix/sysv/linux/i386/i686/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/getcwd.c: No real need to restore errno. * sysdeps/unix/sysv/linux/grantpt.c: Likewise. * sysdeps/unix/sysv/linux/internal_statvfs.c: Likewise. * sysdeps/unix/sysv/linux/msgctl.c: Likewise. * sysdeps/unix/sysv/linux/readv.c: Likewise. * sysdeps/unix/sysv/linux/writev.c: Likewise.
320 lines
15 KiB
C
320 lines
15 KiB
C
/* This file generated by errnos.awk. */
|
|
|
|
/* The Hurd uses Mach error system 0x10, currently only subsystem 0. */
|
|
#ifndef _HURD_ERRNO
|
|
#define _HURD_ERRNO(n) ((0x10 << 26) | ((n) & 0x3fff))
|
|
#endif
|
|
|
|
#ifdef _ERRNO_H
|
|
|
|
enum __error_t_codes
|
|
{
|
|
#undef EDOM
|
|
#undef ERANGE
|
|
EPERM = _HURD_ERRNO (1),
|
|
#define EPERM _HURD_ERRNO (1) /* Operation not permitted */
|
|
ENOENT = _HURD_ERRNO (2),
|
|
#define ENOENT _HURD_ERRNO (2) /* No such file or directory */
|
|
ESRCH = _HURD_ERRNO (3),
|
|
#define ESRCH _HURD_ERRNO (3) /* No such process */
|
|
EINTR = _HURD_ERRNO (4),
|
|
#define EINTR _HURD_ERRNO (4) /* Interrupted system call */
|
|
EIO = _HURD_ERRNO (5),
|
|
#define EIO _HURD_ERRNO (5) /* Input/output error */
|
|
ENXIO = _HURD_ERRNO (6),
|
|
#define ENXIO _HURD_ERRNO (6) /* No such device or address */
|
|
E2BIG = _HURD_ERRNO (7),
|
|
#define E2BIG _HURD_ERRNO (7) /* Argument list too long */
|
|
ENOEXEC = _HURD_ERRNO (8),
|
|
#define ENOEXEC _HURD_ERRNO (8) /* Exec format error */
|
|
EBADF = _HURD_ERRNO (9),
|
|
#define EBADF _HURD_ERRNO (9) /* Bad file descriptor */
|
|
ECHILD = _HURD_ERRNO (10),
|
|
#define ECHILD _HURD_ERRNO (10)/* No child processes */
|
|
EDEADLK = _HURD_ERRNO (11),
|
|
#define EDEADLK _HURD_ERRNO (11)/* Resource deadlock avoided */
|
|
ENOMEM = _HURD_ERRNO (12),
|
|
#define ENOMEM _HURD_ERRNO (12)/* Cannot allocate memory */
|
|
EACCES = _HURD_ERRNO (13),
|
|
#define EACCES _HURD_ERRNO (13)/* Permission denied */
|
|
EFAULT = _HURD_ERRNO (14),
|
|
#define EFAULT _HURD_ERRNO (14)/* Bad address */
|
|
ENOTBLK = _HURD_ERRNO (15),
|
|
#define ENOTBLK _HURD_ERRNO (15)/* Block device required */
|
|
EBUSY = _HURD_ERRNO (16),
|
|
#define EBUSY _HURD_ERRNO (16)/* Device or resource busy */
|
|
EEXIST = _HURD_ERRNO (17),
|
|
#define EEXIST _HURD_ERRNO (17)/* File exists */
|
|
EXDEV = _HURD_ERRNO (18),
|
|
#define EXDEV _HURD_ERRNO (18)/* Invalid cross-device link */
|
|
ENODEV = _HURD_ERRNO (19),
|
|
#define ENODEV _HURD_ERRNO (19)/* No such device */
|
|
ENOTDIR = _HURD_ERRNO (20),
|
|
#define ENOTDIR _HURD_ERRNO (20)/* Not a directory */
|
|
EISDIR = _HURD_ERRNO (21),
|
|
#define EISDIR _HURD_ERRNO (21)/* Is a directory */
|
|
EINVAL = _HURD_ERRNO (22),
|
|
#define EINVAL _HURD_ERRNO (22)/* Invalid argument */
|
|
EMFILE = _HURD_ERRNO (24),
|
|
#define EMFILE _HURD_ERRNO (24)/* Too many open files */
|
|
ENFILE = _HURD_ERRNO (23),
|
|
#define ENFILE _HURD_ERRNO (23)/* Too many open files in system */
|
|
ENOTTY = _HURD_ERRNO (25),
|
|
#define ENOTTY _HURD_ERRNO (25)/* Inappropriate ioctl for device */
|
|
ETXTBSY = _HURD_ERRNO (26),
|
|
#define ETXTBSY _HURD_ERRNO (26)/* Text file busy */
|
|
EFBIG = _HURD_ERRNO (27),
|
|
#define EFBIG _HURD_ERRNO (27)/* File too large */
|
|
ENOSPC = _HURD_ERRNO (28),
|
|
#define ENOSPC _HURD_ERRNO (28)/* No space left on device */
|
|
ESPIPE = _HURD_ERRNO (29),
|
|
#define ESPIPE _HURD_ERRNO (29)/* Illegal seek */
|
|
EROFS = _HURD_ERRNO (30),
|
|
#define EROFS _HURD_ERRNO (30)/* Read-only file system */
|
|
EMLINK = _HURD_ERRNO (31),
|
|
#define EMLINK _HURD_ERRNO (31)/* Too many links */
|
|
EPIPE = _HURD_ERRNO (32),
|
|
#define EPIPE _HURD_ERRNO (32)/* Broken pipe */
|
|
EDOM = _HURD_ERRNO (33),
|
|
#define EDOM _HURD_ERRNO (33)/* Numerical argument out of domain */
|
|
ERANGE = _HURD_ERRNO (34),
|
|
#define ERANGE _HURD_ERRNO (34)/* Numerical result out of range */
|
|
EAGAIN = _HURD_ERRNO (35),
|
|
#define EAGAIN _HURD_ERRNO (35)/* Resource temporarily unavailable */
|
|
#define EWOULDBLOCK EAGAIN /* Operation would block */
|
|
EINPROGRESS = _HURD_ERRNO (36),
|
|
#define EINPROGRESS _HURD_ERRNO (36)/* Operation now in progress */
|
|
EALREADY = _HURD_ERRNO (37),
|
|
#define EALREADY _HURD_ERRNO (37)/* Operation already in progress */
|
|
ENOTSOCK = _HURD_ERRNO (38),
|
|
#define ENOTSOCK _HURD_ERRNO (38)/* Socket operation on non-socket */
|
|
EMSGSIZE = _HURD_ERRNO (40),
|
|
#define EMSGSIZE _HURD_ERRNO (40)/* Message too long */
|
|
EPROTOTYPE = _HURD_ERRNO (41),
|
|
#define EPROTOTYPE _HURD_ERRNO (41)/* Protocol wrong type for socket */
|
|
ENOPROTOOPT = _HURD_ERRNO (42),
|
|
#define ENOPROTOOPT _HURD_ERRNO (42)/* Protocol not available */
|
|
EPROTONOSUPPORT = _HURD_ERRNO (43),
|
|
#define EPROTONOSUPPORT _HURD_ERRNO (43)/* Protocol not supported */
|
|
ESOCKTNOSUPPORT = _HURD_ERRNO (44),
|
|
#define ESOCKTNOSUPPORT _HURD_ERRNO (44)/* Socket type not supported */
|
|
EOPNOTSUPP = _HURD_ERRNO (45),
|
|
#define EOPNOTSUPP _HURD_ERRNO (45)/* Operation not supported */
|
|
EPFNOSUPPORT = _HURD_ERRNO (46),
|
|
#define EPFNOSUPPORT _HURD_ERRNO (46)/* Protocol family not supported */
|
|
EAFNOSUPPORT = _HURD_ERRNO (47),
|
|
#define EAFNOSUPPORT _HURD_ERRNO (47)/* Address family not supported by protocol */
|
|
EADDRINUSE = _HURD_ERRNO (48),
|
|
#define EADDRINUSE _HURD_ERRNO (48)/* Address already in use */
|
|
EADDRNOTAVAIL = _HURD_ERRNO (49),
|
|
#define EADDRNOTAVAIL _HURD_ERRNO (49)/* Cannot assign requested address */
|
|
ENETDOWN = _HURD_ERRNO (50),
|
|
#define ENETDOWN _HURD_ERRNO (50)/* Network is down */
|
|
ENETUNREACH = _HURD_ERRNO (51),
|
|
#define ENETUNREACH _HURD_ERRNO (51)/* Network is unreachable */
|
|
ENETRESET = _HURD_ERRNO (52),
|
|
#define ENETRESET _HURD_ERRNO (52)/* Network dropped connection on reset */
|
|
ECONNABORTED = _HURD_ERRNO (53),
|
|
#define ECONNABORTED _HURD_ERRNO (53)/* Software caused connection abort */
|
|
ECONNRESET = _HURD_ERRNO (54),
|
|
#define ECONNRESET _HURD_ERRNO (54)/* Connection reset by peer */
|
|
ENOBUFS = _HURD_ERRNO (55),
|
|
#define ENOBUFS _HURD_ERRNO (55)/* No buffer space available */
|
|
EISCONN = _HURD_ERRNO (56),
|
|
#define EISCONN _HURD_ERRNO (56)/* Transport endpoint is already connected */
|
|
ENOTCONN = _HURD_ERRNO (57),
|
|
#define ENOTCONN _HURD_ERRNO (57)/* Transport endpoint is not connected */
|
|
EDESTADDRREQ = _HURD_ERRNO (39),
|
|
#define EDESTADDRREQ _HURD_ERRNO (39)/* Destination address required */
|
|
ESHUTDOWN = _HURD_ERRNO (58),
|
|
#define ESHUTDOWN _HURD_ERRNO (58)/* Cannot send after transport endpoint shutdown */
|
|
ETOOMANYREFS = _HURD_ERRNO (59),
|
|
#define ETOOMANYREFS _HURD_ERRNO (59)/* Too many references: cannot splice */
|
|
ETIMEDOUT = _HURD_ERRNO (60),
|
|
#define ETIMEDOUT _HURD_ERRNO (60)/* Connection timed out */
|
|
ECONNREFUSED = _HURD_ERRNO (61),
|
|
#define ECONNREFUSED _HURD_ERRNO (61)/* Connection refused */
|
|
ELOOP = _HURD_ERRNO (62),
|
|
#define ELOOP _HURD_ERRNO (62)/* Too many levels of symbolic links */
|
|
ENAMETOOLONG = _HURD_ERRNO (63),
|
|
#define ENAMETOOLONG _HURD_ERRNO (63)/* File name too long */
|
|
EHOSTDOWN = _HURD_ERRNO (64),
|
|
#define EHOSTDOWN _HURD_ERRNO (64)/* Host is down */
|
|
EHOSTUNREACH = _HURD_ERRNO (65),
|
|
#define EHOSTUNREACH _HURD_ERRNO (65)/* No route to host */
|
|
ENOTEMPTY = _HURD_ERRNO (66),
|
|
#define ENOTEMPTY _HURD_ERRNO (66)/* Directory not empty */
|
|
EPROCLIM = _HURD_ERRNO (67),
|
|
#define EPROCLIM _HURD_ERRNO (67)/* Too many processes */
|
|
EUSERS = _HURD_ERRNO (68),
|
|
#define EUSERS _HURD_ERRNO (68)/* Too many users */
|
|
EDQUOT = _HURD_ERRNO (69),
|
|
#define EDQUOT _HURD_ERRNO (69)/* Disk quota exceeded */
|
|
ESTALE = _HURD_ERRNO (70),
|
|
#define ESTALE _HURD_ERRNO (70)/* Stale NFS file handle */
|
|
EREMOTE = _HURD_ERRNO (71),
|
|
#define EREMOTE _HURD_ERRNO (71)/* Object is remote */
|
|
EBADRPC = _HURD_ERRNO (72),
|
|
#define EBADRPC _HURD_ERRNO (72)/* RPC struct is bad */
|
|
ERPCMISMATCH = _HURD_ERRNO (73),
|
|
#define ERPCMISMATCH _HURD_ERRNO (73)/* RPC version wrong */
|
|
EPROGUNAVAIL = _HURD_ERRNO (74),
|
|
#define EPROGUNAVAIL _HURD_ERRNO (74)/* RPC program not available */
|
|
EPROGMISMATCH = _HURD_ERRNO (75),
|
|
#define EPROGMISMATCH _HURD_ERRNO (75)/* RPC program version wrong */
|
|
EPROCUNAVAIL = _HURD_ERRNO (76),
|
|
#define EPROCUNAVAIL _HURD_ERRNO (76)/* RPC bad procedure for program */
|
|
ENOLCK = _HURD_ERRNO (77),
|
|
#define ENOLCK _HURD_ERRNO (77)/* No locks available */
|
|
EFTYPE = _HURD_ERRNO (79),
|
|
#define EFTYPE _HURD_ERRNO (79)/* Inappropriate file type or format */
|
|
EAUTH = _HURD_ERRNO (80),
|
|
#define EAUTH _HURD_ERRNO (80)/* Authentication error */
|
|
ENEEDAUTH = _HURD_ERRNO (81),
|
|
#define ENEEDAUTH _HURD_ERRNO (81)/* Need authenticator */
|
|
ENOSYS = _HURD_ERRNO (78),
|
|
#define ENOSYS _HURD_ERRNO (78)/* Function not implemented */
|
|
ENOTSUP = _HURD_ERRNO (118),
|
|
#define ENOTSUP _HURD_ERRNO (118)/* Not supported */
|
|
EILSEQ = _HURD_ERRNO (106),
|
|
#define EILSEQ _HURD_ERRNO (106)/* Invalid or incomplete multibyte or wide character */
|
|
EBACKGROUND = _HURD_ERRNO (100),
|
|
#define EBACKGROUND _HURD_ERRNO (100)/* Inappropriate operation for background process */
|
|
EDIED = _HURD_ERRNO (101),
|
|
#define EDIED _HURD_ERRNO (101)/* Translator died */
|
|
ED = _HURD_ERRNO (102),
|
|
#define ED _HURD_ERRNO (102)/* ? */
|
|
EGREGIOUS = _HURD_ERRNO (103),
|
|
#define EGREGIOUS _HURD_ERRNO (103)/* You really blew it this time */
|
|
EIEIO = _HURD_ERRNO (104),
|
|
#define EIEIO _HURD_ERRNO (104)/* Computer bought the farm */
|
|
EGRATUITOUS = _HURD_ERRNO (105),
|
|
#define EGRATUITOUS _HURD_ERRNO (105)/* Gratuitous error */
|
|
EBADMSG = _HURD_ERRNO (107),
|
|
#define EBADMSG _HURD_ERRNO (107)/* Bad message */
|
|
EIDRM = _HURD_ERRNO (108),
|
|
#define EIDRM _HURD_ERRNO (108)/* Identifier removed */
|
|
EMULTIHOP = _HURD_ERRNO (109),
|
|
#define EMULTIHOP _HURD_ERRNO (109)/* Multihop attempted */
|
|
ENODATA = _HURD_ERRNO (110),
|
|
#define ENODATA _HURD_ERRNO (110)/* No data available */
|
|
ENOLINK = _HURD_ERRNO (111),
|
|
#define ENOLINK _HURD_ERRNO (111)/* Link has been severed */
|
|
ENOMSG = _HURD_ERRNO (112),
|
|
#define ENOMSG _HURD_ERRNO (112)/* No message of desired type */
|
|
ENOSR = _HURD_ERRNO (113),
|
|
#define ENOSR _HURD_ERRNO (113)/* Out of streams resources */
|
|
ENOSTR = _HURD_ERRNO (114),
|
|
#define ENOSTR _HURD_ERRNO (114)/* Device not a stream */
|
|
EOVERFLOW = _HURD_ERRNO (115),
|
|
#define EOVERFLOW _HURD_ERRNO (115)/* Value too large for defined data type */
|
|
EPROTO = _HURD_ERRNO (116),
|
|
#define EPROTO _HURD_ERRNO (116)/* Protocol error */
|
|
ETIME = _HURD_ERRNO (117),
|
|
#define ETIME _HURD_ERRNO (117)/* Timer expired */
|
|
|
|
/* Errors from <mach/message.h>. */
|
|
EMACH_SEND_IN_PROGRESS = 0x10000001,
|
|
EMACH_SEND_INVALID_DATA = 0x10000002,
|
|
EMACH_SEND_INVALID_DEST = 0x10000003,
|
|
EMACH_SEND_TIMED_OUT = 0x10000004,
|
|
EMACH_SEND_WILL_NOTIFY = 0x10000005,
|
|
EMACH_SEND_NOTIFY_IN_PROGRESS = 0x10000006,
|
|
EMACH_SEND_INTERRUPTED = 0x10000007,
|
|
EMACH_SEND_MSG_TOO_SMALL = 0x10000008,
|
|
EMACH_SEND_INVALID_REPLY = 0x10000009,
|
|
EMACH_SEND_INVALID_RIGHT = 0x1000000a,
|
|
EMACH_SEND_INVALID_NOTIFY = 0x1000000b,
|
|
EMACH_SEND_INVALID_MEMORY = 0x1000000c,
|
|
EMACH_SEND_NO_BUFFER = 0x1000000d,
|
|
EMACH_SEND_NO_NOTIFY = 0x1000000e,
|
|
EMACH_SEND_INVALID_TYPE = 0x1000000f,
|
|
EMACH_SEND_INVALID_HEADER = 0x10000010,
|
|
EMACH_RCV_IN_PROGRESS = 0x10004001,
|
|
EMACH_RCV_INVALID_NAME = 0x10004002,
|
|
EMACH_RCV_TIMED_OUT = 0x10004003,
|
|
EMACH_RCV_TOO_LARGE = 0x10004004,
|
|
EMACH_RCV_INTERRUPTED = 0x10004005,
|
|
EMACH_RCV_PORT_CHANGED = 0x10004006,
|
|
EMACH_RCV_INVALID_NOTIFY = 0x10004007,
|
|
EMACH_RCV_INVALID_DATA = 0x10004008,
|
|
EMACH_RCV_PORT_DIED = 0x10004009,
|
|
EMACH_RCV_IN_SET = 0x1000400a,
|
|
EMACH_RCV_HEADER_ERROR = 0x1000400b,
|
|
EMACH_RCV_BODY_ERROR = 0x1000400c,
|
|
|
|
/* Errors from <mach/kern_return.h>. */
|
|
EKERN_INVALID_ADDRESS = 1,
|
|
EKERN_PROTECTION_FAILURE = 2,
|
|
EKERN_NO_SPACE = 3,
|
|
EKERN_INVALID_ARGUMENT = 4,
|
|
EKERN_FAILURE = 5,
|
|
EKERN_RESOURCE_SHORTAGE = 6,
|
|
EKERN_NOT_RECEIVER = 7,
|
|
EKERN_NO_ACCESS = 8,
|
|
EKERN_MEMORY_FAILURE = 9,
|
|
EKERN_MEMORY_ERROR = 10,
|
|
EKERN_NOT_IN_SET = 12,
|
|
EKERN_NAME_EXISTS = 13,
|
|
EKERN_ABORTED = 14,
|
|
EKERN_INVALID_NAME = 15,
|
|
EKERN_INVALID_TASK = 16,
|
|
EKERN_INVALID_RIGHT = 17,
|
|
EKERN_INVALID_VALUE = 18,
|
|
EKERN_UREFS_OVERFLOW = 19,
|
|
EKERN_INVALID_CAPABILITY = 20,
|
|
EKERN_RIGHT_EXISTS = 21,
|
|
EKERN_INVALID_HOST = 22,
|
|
EKERN_MEMORY_PRESENT = 23,
|
|
EKERN_WRITE_PROTECTION_FAILURE = 24,
|
|
EKERN_TERMINATED = 26,
|
|
|
|
/* Errors from <mach/mig_errors.h>. */
|
|
EMIG_TYPE_ERROR = -300 /* client type check failure */,
|
|
EMIG_REPLY_MISMATCH = -301 /* wrong reply message ID */,
|
|
EMIG_REMOTE_ERROR = -302 /* server detected error */,
|
|
EMIG_BAD_ID = -303 /* bad request message ID */,
|
|
EMIG_BAD_ARGUMENTS = -304 /* server type check failure */,
|
|
EMIG_NO_REPLY = -305 /* no reply should be sent */,
|
|
EMIG_EXCEPTION = -306 /* server raised exception */,
|
|
EMIG_ARRAY_TOO_LARGE = -307 /* array not large enough */,
|
|
EMIG_SERVER_DIED = -308 /* server died */,
|
|
EMIG_DESTROY_REQUEST = -309 /* destroy request with no reply */,
|
|
|
|
/* Errors from <device/device_types.h>. */
|
|
ED_IO_ERROR = 2500 /* hardware IO error */,
|
|
ED_WOULD_BLOCK = 2501 /* would block, but D_NOWAIT set */,
|
|
ED_NO_SUCH_DEVICE = 2502 /* no such device */,
|
|
ED_ALREADY_OPEN = 2503 /* exclusive-use device already open */,
|
|
ED_DEVICE_DOWN = 2504 /* device has been shut down */,
|
|
ED_INVALID_OPERATION = 2505 /* bad operation for device */,
|
|
ED_INVALID_RECNUM = 2506 /* invalid record (block) number */,
|
|
ED_INVALID_SIZE = 2507 /* invalid IO size */,
|
|
ED_NO_MEMORY = 2508 /* memory allocation failure */,
|
|
ED_READ_ONLY = 2509 /* device cannot be written to */
|
|
|
|
};
|
|
|
|
#define _HURD_ERRNOS 119
|
|
|
|
/* User-visible type of error codes. It is ok to use `int' or
|
|
`kern_return_t' for these, but with `error_t' the debugger prints
|
|
symbolic values. */
|
|
#ifdef __USE_GNU
|
|
typedef enum __error_t_codes error_t;
|
|
#define __error_t_defined 1
|
|
#endif
|
|
|
|
/* Return the current thread's location for `errno'.
|
|
The syntax of this function allows redeclarations like `int errno'. */
|
|
extern int *__errno_location (void) __THROW __attribute__ ((__const__));
|
|
|
|
#define errno (*__errno_location ())
|
|
|
|
#endif /* <errno.h> included. */
|
|
|
|
#if !defined (_ERRNO_H) && defined (__need_Emath)
|
|
#define EDOM _HURD_ERRNO (33)/* Numerical argument out of domain */
|
|
#define ERANGE _HURD_ERRNO (34)/* Numerical result out of range */
|
|
#endif /* <errno.h> not included and need math error codes. */
|