Go to file
Paul Pluzhnikov 277ae3f186 2014-03-27 Paul Pluzhnikov <ppluzhnikov@google.com>
* elf/dl-load.c: Finish conversion of __builtin_expect into
	__glibc_{un}likely.
2014-03-27 11:50:42 -07:00
argp Fix __STRICT_ANSI__ -Wundef warnings 2014-03-17 16:05:23 +00:00
assert Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
benchtests benchtests/bench-strtod.c: Increase timeout value 2014-03-26 09:43:28 +00:00
bits Fix -Wundef warnins for __FP_FAST_FMA* 2014-03-21 17:28:43 +05:30
catgets Count miscellaneous files built on host for testing as tests. 2014-03-07 03:31:41 +00:00
conf
conform Add stardard definition on conform processing 2014-03-18 13:55:48 -05:00
crypt Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
csu Remove "Compiled on ..." crapola from version text. 2014-03-14 16:05:31 -07:00
ctype Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
debug tst-longjmp_chk2: add comments/sanity check 2014-03-13 17:05:29 -04:00
dirent Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
dlfcn Fix fallout from Joseph's untested Makeconfig change. 2014-02-28 13:00:27 -08:00
elf 2014-03-27 Paul Pluzhnikov <ppluzhnikov@google.com> 2014-03-27 11:50:42 -07:00
gmon Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
gnulib Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
grp Enumerate tests with special rules in tests-special variable. 2014-03-06 22:35:33 +00:00
gshadow Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
hesiod Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
hurd Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
iconv Make tests consistently use *.out output files. 2014-03-07 03:29:23 +00:00
iconvdata Make tests consistently use *.out output files. 2014-03-07 03:29:23 +00:00
include Compile with -Wundef. 2014-03-14 11:32:51 -07:00
inet Return NULL for wildcard values in getnetgrent from nscd (BZ #16759) 2014-03-27 19:49:51 +05:30
intl Make tests consistently use *.out output files. 2014-03-07 03:29:23 +00:00
io Enumerate tests with special rules in tests-special variable. 2014-03-06 22:35:33 +00:00
libidn Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
libio Setup LOCPATH for tst-ftell-active-handler and tst-ftell-partial-wide in libio 2014-03-25 12:43:30 +01:00
locale Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
localedata Count miscellaneous files built on host for testing as tests. 2014-03-07 03:31:41 +00:00
login Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
mach Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
malloc Enumerate tests with special rules in tests-special variable. 2014-03-06 22:35:33 +00:00
manual Do not terminate default test runs on test failure. 2014-03-14 21:02:40 +00:00
math Fix x86/x86_64 expl/exp10l spurious underflows (bug 16348). 2014-03-27 18:41:14 +00:00
misc misc/sys/xattr.h: guard against linux uapi header inclusion 2014-03-18 14:27:56 +01:00
nis Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
nptl Fix dwarf2 unwinding through futex functions. 2014-03-26 23:18:15 -04:00
nptl_db Enumerate tests with special rules in tests-special variable. 2014-03-06 22:35:33 +00:00
nscd Avoid overlapping addresses to stpcpy calls in nscd (BZ #16760) 2014-03-27 19:48:15 +05:30
nss Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
po Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
ports Compile with -Wundef. 2014-03-14 11:32:51 -07:00
posix Use += before-compile instead of a :=. 2014-03-24 16:59:01 +01:00
pwd Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
resolv Make tests consistently use *.out output files. 2014-03-07 03:29:23 +00:00
resource Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
rt Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
scripts Kludge fix for Versions.def regression 2014-03-25 15:00:34 -07:00
setjmp Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
shadow Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
signal Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
socket Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
soft-fp Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
stdio-common Revert "Fix _IO_JUMPS_OFFSET -Wundef warnings" 2014-03-17 20:37:42 +00:00
stdlib Enumerate tests with special rules in tests-special variable. 2014-03-06 22:35:33 +00:00
streams Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
string PowerPC: optimized strpbrk for POWER7 2014-03-20 19:46:13 -05:00
sunrpc Fix fallout from Joseph's untested Makeconfig change. 2014-02-28 13:00:27 -08:00
sysdeps Fix x86/x86_64 expl/exp10l spurious underflows (bug 16348). 2014-03-27 18:41:14 +00:00
sysvipc Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
termios Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
time Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
timezone Count miscellaneous files built on host for testing as tests. 2014-03-07 03:31:41 +00:00
wcsmbs Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
wctype Consistently include Makeconfig after defining subdir. 2014-02-26 23:12:03 +00:00
.gitattributes
.gitignore ignore gdb related files 2013-12-27 16:30:50 -05:00
abi-tags
aclocal.m4 rename configure.in to configure.ac 2013-10-30 17:32:08 +10:00
BUGS
CANCEL-FCT-WAIVE
CANCEL-FILE-WAIVE
ChangeLog 2014-03-27 Paul Pluzhnikov <ppluzhnikov@google.com> 2014-03-27 11:50:42 -07:00
ChangeLog.1
ChangeLog.2
ChangeLog.3
ChangeLog.4
ChangeLog.5
ChangeLog.6
ChangeLog.7
ChangeLog.8
ChangeLog.9
ChangeLog.10
ChangeLog.11
ChangeLog.12
ChangeLog.13
ChangeLog.14
ChangeLog.15
ChangeLog.16
ChangeLog.17
config.h.in Save and restore AVX-512 zmm registers to x86-64 ld.so 2014-03-13 11:19:08 -07:00
config.make.in stop supporting bash-1.x 2014-03-13 20:20:12 -04:00
configure stop supporting bash-1.x 2014-03-13 20:20:12 -04:00
configure.ac stop supporting bash-1.x 2014-03-13 20:20:12 -04:00
CONFORMANCE
COPYING
COPYING.LIB
cppflags-iterator.mk
extra-lib.mk
extra-modules.mk
INSTALL Do not terminate default test runs on test failure. 2014-03-14 21:02:40 +00:00
libc-abis
LICENSES
Makeconfig Do not terminate default test runs on test failure. 2014-03-14 21:02:40 +00:00
Makefile Do not terminate default test runs on test failure. 2014-03-14 21:02:40 +00:00
Makefile.in
Makerules Exit with error status on check-abi failure. 2014-03-18 00:05:28 +00:00
NAMESPACE
NEWS Fix x86/x86_64 expl/exp10l spurious underflows (bug 16348). 2014-03-27 18:41:14 +00:00
o-iterator.mk
PROJECTS
README [MicroBlaze]: Move MicroBlaze from ports to sysdeps. 2014-02-17 11:08:21 +10:00
Rules Generate overall summary of test results. 2014-03-07 03:25:57 +00:00
shlib-versions PowerPC: Change powerpc64le start ABI to 2.17. 2014-02-04 09:49:08 -02:00
test-skeleton.c tests: unify fortification handler logic 2014-02-08 06:58:43 -05:00
version.h Open development for 2.20 2014-02-08 08:10:29 +10:00
WUR-REPORT

This directory contains the sources of the GNU C Library.
See the file "version.h" for what release version you have.

The GNU C Library is the standard system C library for all GNU systems,
and is an important part of what makes up a GNU system.  It provides the
system API for all programs written in C and C-compatible languages such
as C++ and Objective C; the runtime facilities of other programming
languages use the C library to access the underlying operating system.

In GNU/Linux systems, the C library works with the Linux kernel to
implement the operating system behavior seen by user applications.
In GNU/Hurd systems, it works with a microkernel and Hurd servers.

The GNU C Library implements much of the POSIX.1 functionality in the
GNU/Hurd system, using configurations i[4567]86-*-gnu.  The current
GNU/Hurd support requires out-of-tree patches that will eventually be
incorporated into an official GNU C Library release.

When working with Linux kernels, this version of the GNU C Library
requires Linux kernel version 2.6.16 or later.

Also note that the shared version of the libgcc_s library must be
installed for the pthread library to work correctly.

The GNU C Library supports these configurations for using Linux kernels:

	aarch64*-*-linux-gnu
	alpha*-*-linux-gnu
	arm-*-linux-gnueabi
	i[4567]86-*-linux-gnu
	x86_64-*-linux-gnu	Can build either x86_64 or x32
	ia64-*-linux-gnu
	m68k-*-linux-gnu
	microblaze*-*-linux-gnu
	mips-*-linux-gnu
	mips64-*-linux-gnu
	powerpc-*-linux-gnu	Hardware or software floating point, BE only.
	powerpc64*-*-linux-gnu	Big-endian and little-endian.
	s390-*-linux-gnu
	s390x-*-linux-gnu
	sh[34]-*-linux-gnu
	sparc*-*-linux-gnu
	sparc64*-*-linux-gnu
	tilegx-*-linux-gnu
	tilepro-*-linux-gnu

The code for other CPU configurations supported by volunteers outside of
the core glibc maintenance effort is contained in the `ports' add-on,
located in the `ports' subdirectory of the source tree.

	hppa-*-linux-gnu	Not currently functional without patches.

If you are interested in doing a port, please contact the glibc
maintainers; see http://www.gnu.org/software/libc/ for more
information.

See the file INSTALL to find out how to configure, build, and install
the GNU C Library.  You might also consider reading the WWW pages for
the C library at http://www.gnu.org/software/libc/.

The GNU C Library is (almost) completely documented by the Texinfo manual
found in the `manual/' subdirectory.  The manual is still being updated
and contains some known errors and omissions; we regret that we do not
have the resources to work on the manual as much as we would like.  For
corrections to the manual, please file a bug in the `manual' component,
following the bug-reporting instructions below.  Please be sure to check
the manual in the current development sources to see if your problem has
already been corrected.

Please see http://www.gnu.org/software/libc/bugs.html for bug reporting
information.  We are now using the Bugzilla system to track all bug reports.
This web page gives detailed information on how to report bugs properly.

The GNU C Library is free software.  See the file COPYING.LIB for copying
conditions, and LICENSES for notices about a few contributions that require
these additional notices to be distributed.  License copyright years may be
listed using range notation, e.g., 2000-2013, indicating that every year in
the range, inclusive, is a copyrightable year that would otherwise be listed
individually.