/* Copyright (C) 1992,1993,1995-2000,2002,2003 Free Software Foundation, Inc. This file is part of the GNU C Library. Contributed by Ulrich Drepper, , August 1995. The GNU C Library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. The GNU C Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with the GNU C Library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ #ifndef _LINUX_I386_SYSDEP_H #define _LINUX_I386_SYSDEP_H 1 /* There is some commonality. */ #include #include #include /* Defines RTLD_PRIVATE_ERRNO and USE_DL_SYSINFO. */ #include #include /* For Linux we can use the system call table in the header file /usr/include/asm/unistd.h of the kernel. But these symbols do not follow the SYS_* syntax so we have to redefine the `SYS_ify' macro here. */ #undef SYS_ify #define SYS_ify(syscall_name) __NR_##syscall_name #if defined USE_DL_SYSINFO \ && (!defined NOT_IN_libc || defined IS_IN_libpthread) # define I386_USE_SYSENTER 1 #else # undef I386_USE_SYSENTER #endif #ifdef __ASSEMBLER__ /* Linux uses a negative return value to indicate syscall errors, unlike most Unices, which use the condition codes' carry flag. Since version 2.1 the return value of a system call might be negative even if the call succeeded. E.g., the `lseek' system call might return a large offset. Therefore we must not anymore test for < 0, but test for a real error by making sure the value in %eax is a real error number. Linus said he will make sure the no syscall returns a value in -1 .. -4095 as a valid result so we can savely test with -4095. */ /* We don't want the label for the error handle to be global when we define it here. */ #ifdef PIC # define SYSCALL_ERROR_LABEL 0f #else # define SYSCALL_ERROR_LABEL syscall_error #endif #undef PSEUDO #define PSEUDO(name, syscall_name, args) \ .text; \ ENTRY (name) \ DO_CALL (syscall_name, args); \ cmpl $-4095, %eax; \ jae SYSCALL_ERROR_LABEL; \ L(pseudo_end): #undef PSEUDO_END #define PSEUDO_END(name) \ SYSCALL_ERROR_HANDLER \ END (name) #undef PSEUDO_NOERRNO #define PSEUDO_NOERRNO(name, syscall_name, args) \ .text; \ ENTRY (name) \ DO_CALL (syscall_name, args) #undef PSEUDO_END_NOERRNO #define PSEUDO_END_NOERRNO(name) \ END (name) #define ret_NOERRNO ret #ifndef PIC # define SYSCALL_ERROR_HANDLER /* Nothing here; code in sysdep.S is used. */ #else # ifndef HAVE_HIDDEN # define SETUP_PIC_REG(reg) \ call 1f; \ .subsection 1; \ 1:movl (%esp), %e##reg; \ ret; \ .previous # else # define SETUP_PIC_REG(reg) \ .section .gnu.linkonce.t.__i686.get_pc_thunk.reg,"ax",@progbits; \ .globl __i686.get_pc_thunk.reg; \ .hidden __i686.get_pc_thunk.reg; \ .type __i686.get_pc_thunk.reg,@function; \ __i686.get_pc_thunk.reg: \ movl (%esp), %e##reg; \ ret; \ .size __i686.get_pc_thunk.reg, . - __i686.get_pc_thunk.reg; \ .previous; \ call __i686.get_pc_thunk.reg # endif # if RTLD_PRIVATE_ERRNO # define SYSCALL_ERROR_HANDLER \ 0:SETUP_PIC_REG(cx); \ addl $_GLOBAL_OFFSET_TABLE_, %ecx; \ xorl %edx, %edx; \ subl %eax, %edx; \ movl %edx, errno@GOTOFF(%ecx); \ orl $-1, %eax; \ jmp L(pseudo_end); # elif defined _LIBC_REENTRANT # if USE___THREAD # ifndef NOT_IN_libc # define SYSCALL_ERROR_ERRNO __libc_errno # else # define SYSCALL_ERROR_ERRNO errno # endif # define SYSCALL_ERROR_HANDLER \ 0:SETUP_PIC_REG (cx); \ addl $_GLOBAL_OFFSET_TABLE_, %ecx; \ movl SYSCALL_ERROR_ERRNO@GOTNTPOFF(%ecx), %ecx; \ xorl %edx, %edx; \ subl %eax, %edx; \ movl %edx, %gs:0(%ecx); \ orl $-1, %eax; \ jmp L(pseudo_end); # else # define SYSCALL_ERROR_HANDLER \ 0:pushl %ebx; \ SETUP_PIC_REG (bx); \ addl $_GLOBAL_OFFSET_TABLE_, %ebx; \ xorl %edx, %edx; \ subl %eax, %edx; \ pushl %edx; \ PUSH_ERRNO_LOCATION_RETURN; \ call BP_SYM (__errno_location)@PLT; \ POP_ERRNO_LOCATION_RETURN; \ popl %ecx; \ popl %ebx; \ movl %ecx, (%eax); \ orl $-1, %eax; \ jmp L(pseudo_end); /* A quick note: it is assumed that the call to `__errno_location' does not modify the stack! */ # endif # else /* Store (- %eax) into errno through the GOT. */ # define SYSCALL_ERROR_HANDLER \ 0:SETUP_PIC_REG(cx); \ addl $_GLOBAL_OFFSET_TABLE_, %ecx; \ xorl %edx, %edx; \ subl %eax, %edx; \ movl errno@GOT(%ecx), %ecx; \ movl %edx, (%ecx); \ orl $-1, %eax; \ jmp L(pseudo_end); # endif /* _LIBC_REENTRANT */ #endif /* PIC */ /* The original calling convention for system calls on Linux/i386 is to use int $0x80. */ #ifdef I386_USE_SYSENTER # ifdef SHARED # define ENTER_KERNEL call *%gs:SYSINFO_OFFSET # else # define ENTER_KERNEL call *_dl_sysinfo # endif #else # define ENTER_KERNEL int $0x80 #endif /* Linux takes system call arguments in registers: syscall number %eax call-clobbered arg 1 %ebx call-saved arg 2 %ecx call-clobbered arg 3 %edx call-clobbered arg 4 %esi call-saved arg 5 %edi call-saved The stack layout upon entering the function is: 20(%esp) Arg# 5 16(%esp) Arg# 4 12(%esp) Arg# 3 8(%esp) Arg# 2 4(%esp) Arg# 1 (%esp) Return address (Of course a function with say 3 arguments does not have entries for arguments 4 and 5.) The following code tries hard to be optimal. A general assumption (which is true according to the data books I have) is that 2 * xchg is more expensive than pushl + movl + popl Beside this a neat trick is used. The calling conventions for Linux tell that among the registers used for parameters %ecx and %edx need not be saved. Beside this we may clobber this registers even when they are not used for parameter passing. As a result one can see below that we save the content of the %ebx register in the %edx register when we have less than 3 arguments (2 * movl is less expensive than pushl + popl). Second unlike for the other registers we don't save the content of %ecx and %edx when we have more than 1 and 2 registers resp. The code below might look a bit long but we have to take care for the pipelined processors (i586). Here the `pushl' and `popl' instructions are marked as NP (not pairable) but the exception is two consecutive of these instruction. This gives no penalty on other processors though. */ #undef DO_CALL #define DO_CALL(syscall_name, args) \ PUSHARGS_##args \ DOARGS_##args \ movl $SYS_ify (syscall_name), %eax; \ ENTER_KERNEL \ POPARGS_##args #define PUSHARGS_0 /* No arguments to push. */ #define DOARGS_0 /* No arguments to frob. */ #define POPARGS_0 /* No arguments to pop. */ #define _PUSHARGS_0 /* No arguments to push. */ #define _DOARGS_0(n) /* No arguments to frob. */ #define _POPARGS_0 /* No arguments to pop. */ #define PUSHARGS_1 movl %ebx, %edx; PUSHARGS_0 #define DOARGS_1 _DOARGS_1 (4) #define POPARGS_1 POPARGS_0; movl %edx, %ebx #define _PUSHARGS_1 pushl %ebx; _PUSHARGS_0 #define _DOARGS_1(n) movl n(%esp), %ebx; _DOARGS_0(n-4) #define _POPARGS_1 _POPARGS_0; popl %ebx #define PUSHARGS_2 PUSHARGS_1 #define DOARGS_2 _DOARGS_2 (8) #define POPARGS_2 POPARGS_1 #define _PUSHARGS_2 _PUSHARGS_1 #define _DOARGS_2(n) movl n(%esp), %ecx; _DOARGS_1 (n-4) #define _POPARGS_2 _POPARGS_1 #define PUSHARGS_3 _PUSHARGS_2 #define DOARGS_3 _DOARGS_3 (16) #define POPARGS_3 _POPARGS_3 #define _PUSHARGS_3 _PUSHARGS_2 #define _DOARGS_3(n) movl n(%esp), %edx; _DOARGS_2 (n-4) #define _POPARGS_3 _POPARGS_2 #define PUSHARGS_4 _PUSHARGS_4 #define DOARGS_4 _DOARGS_4 (24) #define POPARGS_4 _POPARGS_4 #define _PUSHARGS_4 pushl %esi; _PUSHARGS_3 #define _DOARGS_4(n) movl n(%esp), %esi; _DOARGS_3 (n-4) #define _POPARGS_4 _POPARGS_3; popl %esi #define PUSHARGS_5 _PUSHARGS_5 #define DOARGS_5 _DOARGS_5 (32) #define POPARGS_5 _POPARGS_5 #define _PUSHARGS_5 pushl %edi; _PUSHARGS_4 #define _DOARGS_5(n) movl n(%esp), %edi; _DOARGS_4 (n-4) #define _POPARGS_5 _POPARGS_4; popl %edi #else /* !__ASSEMBLER__ */ /* We need some help from the assembler to generate optimal code. We define some macros here which later will be used. */ asm (".L__X'%ebx = 1\n\t" ".L__X'%ecx = 2\n\t" ".L__X'%edx = 2\n\t" ".L__X'%eax = 3\n\t" ".L__X'%esi = 3\n\t" ".L__X'%edi = 3\n\t" ".L__X'%ebp = 3\n\t" ".L__X'%esp = 3\n\t" ".macro bpushl name reg\n\t" ".if 1 - \\name\n\t" ".if 2 - \\name\n\t" "pushl %ebx\n\t" ".else\n\t" "xchgl \\reg, %ebx\n\t" ".endif\n\t" ".endif\n\t" ".endm\n\t" ".macro bpopl name reg\n\t" ".if 1 - \\name\n\t" ".if 2 - \\name\n\t" "popl %ebx\n\t" ".else\n\t" "xchgl \\reg, %ebx\n\t" ".endif\n\t" ".endif\n\t" ".endm\n\t" ".macro bmovl name reg\n\t" ".if 1 - \\name\n\t" ".if 2 - \\name\n\t" "movl \\reg, %ebx\n\t" ".endif\n\t" ".endif\n\t" ".endm\n\t"); /* Define a macro which expands inline into the wrapper code for a system call. */ #undef INLINE_SYSCALL #define INLINE_SYSCALL(name, nr, args...) \ ({ \ unsigned int resultvar = INTERNAL_SYSCALL (name, , nr, args); \ if (__builtin_expect (INTERNAL_SYSCALL_ERROR_P (resultvar, ), 0)) \ { \ __set_errno (INTERNAL_SYSCALL_ERRNO (resultvar, )); \ resultvar = 0xffffffff; \ } \ (int) resultvar; }) /* Define a macro which expands inline into the wrapper code for a system call. This use is for internal calls that do not need to handle errors normally. It will never touch errno. This returns just what the kernel gave back. */ #undef INTERNAL_SYSCALL #ifdef I386_USE_SYSENTER # ifdef SHARED # define INTERNAL_SYSCALL(name, err, nr, args...) \ ({ \ unsigned int resultvar; \ asm volatile ( \ LOADARGS_##nr \ "movl %1, %%eax\n\t" \ "call *%%gs:%P2\n\t" \ RESTOREARGS_##nr \ : "=a" (resultvar) \ : "i" (__NR_##name), "i" (offsetof (tcbhead_t, sysinfo)) \ ASMFMT_##nr(args) : "memory", "cc"); \ (int) resultvar; }) # else # define INTERNAL_SYSCALL(name, err, nr, args...) \ ({ \ unsigned int resultvar; \ asm volatile ( \ LOADARGS_##nr \ "movl %1, %%eax\n\t" \ "call *_dl_sysinfo\n\t" \ RESTOREARGS_##nr \ : "=a" (resultvar) \ : "i" (__NR_##name) ASMFMT_##nr(args) : "memory", "cc"); \ (int) resultvar; }) # endif #else # define INTERNAL_SYSCALL(name, err, nr, args...) \ ({ \ unsigned int resultvar; \ asm volatile ( \ LOADARGS_##nr \ "movl %1, %%eax\n\t" \ "int $0x80\n\t" \ RESTOREARGS_##nr \ : "=a" (resultvar) \ : "i" (__NR_##name) ASMFMT_##nr(args) : "memory", "cc"); \ (int) resultvar; }) #endif #undef INTERNAL_SYSCALL_DECL #define INTERNAL_SYSCALL_DECL(err) do { } while (0) #undef INTERNAL_SYSCALL_ERROR_P #define INTERNAL_SYSCALL_ERROR_P(val, err) \ ((unsigned int) (val) >= 0xfffff001u) #undef INTERNAL_SYSCALL_ERRNO #define INTERNAL_SYSCALL_ERRNO(val, err) (-(val)) #define LOADARGS_0 #if defined I386_USE_SYSENTER && defined SHARED # define LOADARGS_1 \ "bpushl .L__X'%k3, %k3\n\t" \ "bmovl .L__X'%k3, %k3\n\t" #else # define LOADARGS_1 \ "bpushl .L__X'%k2, %k2\n\t" \ "bmovl .L__X'%k2, %k2\n\t" #endif #define LOADARGS_2 LOADARGS_1 #define LOADARGS_3 LOADARGS_1 #define LOADARGS_4 LOADARGS_1 #define LOADARGS_5 LOADARGS_1 #define RESTOREARGS_0 #if defined I386_USE_SYSENTER && defined SHARED # define RESTOREARGS_1 \ "bpopl .L__X'%k3, %k3\n\t" #else # define RESTOREARGS_1 \ "bpopl .L__X'%k2, %k2\n\t" #endif #define RESTOREARGS_2 RESTOREARGS_1 #define RESTOREARGS_3 RESTOREARGS_1 #define RESTOREARGS_4 RESTOREARGS_1 #define RESTOREARGS_5 RESTOREARGS_1 #define ASMFMT_0() #define ASMFMT_1(arg1) \ , "acdSD" (arg1) #define ASMFMT_2(arg1, arg2) \ , "adSD" (arg1), "c" (arg2) #define ASMFMT_3(arg1, arg2, arg3) \ , "aSD" (arg1), "c" (arg2), "d" (arg3) #define ASMFMT_4(arg1, arg2, arg3, arg4) \ , "aD" (arg1), "c" (arg2), "d" (arg3), "S" (arg4) #define ASMFMT_5(arg1, arg2, arg3, arg4, arg5) \ , "a" (arg1), "c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5) #endif /* __ASSEMBLER__ */ #endif /* linux/i386/sysdep.h */