This matches the data size initial-exec relocations use on most
targets.
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The posix_spawnattr_tcsetpgrp_np works on a file descriptor (the
controlling terminal), so it would make more sense to actually fit
it on the file actions API.
Also, POSIX_SPAWN_TCSETPGROUP is not really required since it is
implicit by the presence of tcsetpgrp file action.
The posix/tst-spawn6.c is also fixed when TTY can is not present.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
PI_STATIC_AND_HIDDEN means that references to static functions, data
and symbols with hidden visibility do not need any run-time relocations
after the final link, with the build flags used by glibc.
OpenRISC follows this so enabled PI_STATIC_AND_HIDDEN by adding
configure.ac and generating configure.
Suggested-by: Florian Weimer <fweimer@redhat.com>
It is not Hurd-specific, but H.J. Lu wants it there.
Also, dc.a can be used to avoid hardcoding .long vs .quad and thus use
the same implementation for i386 and x86_64.
The rtld audit support show two problems on aarch64:
1. _dl_runtime_resolve does not preserve x8, the indirect result
location register, which might generate wrong result calls
depending of the function signature.
2. The NEON Q registers pushed onto the stack by _dl_runtime_resolve
were twice the size of D registers extracted from the stack frame by
_dl_runtime_profile.
While 2. might result in wrong information passed on the PLT tracing,
1. generates wrong runtime behaviour.
The aarch64 rtld audit support is changed to:
* Both La_aarch64_regs and La_aarch64_retval are expanded to include
both x8 and the full sized NEON V registers, as defined by the
ABI.
* dl_runtime_profile needed to extract registers saved by
_dl_runtime_resolve and put them into the new correctly sized
La_aarch64_regs structure.
* The LAV_CURRENT check is change to only accept new audit modules
to avoid the undefined behavior of not save/restore x8.
* Different than other architectures, audit modules older than
LAV_CURRENT are rejected (both La_aarch64_regs and La_aarch64_retval
changed their layout and there are no requirements to support multiple
audit interface with the inherent aarch64 issues).
* A new field is also reserved on both La_aarch64_regs and
La_aarch64_retval to support variant pcs symbols.
Similar to x86, a new La_aarch64_vector type to represent the NEON
register is added on the La_aarch64_regs (so each type can be accessed
directly).
Since LAV_CURRENT was already bumped to support bind-now, there is
no need to increase it again.
Checked on aarch64-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The audit symbind callback is not called for binaries built with
-Wl,-z,now or when LD_BIND_NOW=1 is used, nor the PLT tracking callbacks
(plt_enter and plt_exit) since this would change the expected
program semantics (where no PLT is expected) and would have performance
implications (such as for BZ#15533).
LAV_CURRENT is also bumped to indicate the audit ABI change (where
la_symbind flags are set by the loader to indicate no possible PLT
trace).
To handle powerpc64 ELFv1 function descriptor, _dl_audit_symbind
requires to know whether bind-now is used so the symbol value is
updated to function text segment instead of the OPD (for lazy binding
this is done by PPC64_LOAD_FUNCPTR on _dl_runtime_resolve).
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
powerpc64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
For audit modules and dependencies with initial-exec TLS, we can not
set the initial TLS image on default loader initialization because it
would already be set by the audit setup. However, subsequent thread
creation would need to follow the default behaviour.
This patch fixes it by setting l_auditing link_map field not only
for the audit modules, but also for all its dependencies. This is
used on _dl_allocate_tls_init to avoid the static TLS initialization
at load time.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Add <dl-r_debug.h> to get the adddress of the r_debug structure after
relocation and its offset before relocation from the PT_DYNAMIC segment
to support DT_DEBUG, DT_MIPS_RLD_MAP_REL and DT_MIPS_RLD_MAP.
Co-developed-by: Xi Ruoyao <xry111@mengyan1223.wang>
The timestamps created by __convert_scm_timestamps only make sense for
64 bit time_t programs, 32 bit time_t programs will ignore 64 bit time_t
timestamps since SO_TIMESTAMP will be defined to old values (either by
glibc or kernel headers).
Worse, if the buffer is not suffice MSG_CTRUNC is set to indicate it
(which breaks some programs [1]).
This patch makes only 64 bit time_t recvmsg and recvmmsg to call
__convert_scm_timestamps. Also, the assumption to called it is changed
from __ASSUME_TIME64_SYSCALLS to __TIMESIZE != 64 since the setsockopt
might be called by libraries built without __TIME_BITS=64. The
MSG_CTRUNC is only set for the 64 bit symbols, it should happen only
if 64 bit time_t programs run older kernels.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://github.com/systemd/systemd/pull/20567
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The __convert_scm_timestamps only updates the control message last
pointer for SOL_SOCKET type, so if the message control buffer contains
multiple ancillary message types the converted timestamp one might
overwrite a valid message.
The test checks if the extra ancillary space is correctly handled
by recvmsg/recvmmsg, where if there is no extra space for the 64-bit
time_t converted message the control buffer should be marked with
MSG_TRUNC. It also check if recvmsg/recvmmsg handle correctly multiple
ancillary data.
Checked on x86_64-linux and on i686-linux-gnu on both 5.11 and
4.15 kernel.
Co-authored-by: Fabian Vogt <fvogt@suse.de>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The glibc 2.34 release really should have added a GLIBC_2.34
symbol to the dynamic loader. With it, we could move functions such
as dlopen or pthread_key_create that work on process-global state
into the dynamic loader (once we have fixed a longstanding issue
with static linking). Without the GLIBC_2.34 symbol, yet another
new symbol version would be needed because old glibc will fail to
load binaries due to the missing symbol version in ld.so that newly
linked programs will require.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Currently there is no proper way to set the controlling terminal through
posix_spawn in race free manner [1]. This forces shell implementations
to keep using fork+exec when launching background process groups,
even when using posix_spawn yields better performance.
This patch adds a new GNU extension so the creating process can
configure the created process terminal group. This is done with a new
flag, POSIX_SPAWN_TCSETPGROUP, along with two new attribute functions:
posix_spawnattr_tcsetpgrp_np, and posix_spawnattr_tcgetpgrp_np.
The function sets a new attribute, spawn-tcgroupfd, that references to
the controlling terminal.
The controlling terminal is set after the spawn-pgroup attribute, and
uses the spawn-tcgroupfd along with current creating process group
(so it is composable with POSIX_SPAWN_SETPGROUP).
To create a process and set the controlling terminal, one can use the
following sequence:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
If the idea is also to create a new process groups:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP
| POSIX_SPAWN_SETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
posix_spawnattr_setpgroup (&attr, 0);
The controlling terminal file descriptor is ignored if the new flag is
not set.
This interface is slight different than the one provided by QNX [2],
which only provides the POSIX_SPAWN_TCSETPGROUP flag. The QNX
documentation does not specify how the controlling terminal is obtained
nor how it iteracts with POSIX_SPAWN_SETPGROUP. Since a glibc
implementation is library based, it is more straightforward and avoid
requires additional file descriptor operations to request the caller
to setup the controlling terminal file descriptor (and it also allows
a bit less error handling by posix_spawn).
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://github.com/ksh93/ksh/issues/79
[2] https://www.qnx.com/developers/docs/7.0.0/index.html#com.qnx.doc.neutrino.lib_ref/topic/p/posix_spawn.html
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
No valid path returned by getcwd would fit into 1 byte, so reject the
size early and return NULL with errno set to ERANGE. This change is
prompted by CVE-2021-3999, which describes a single byte buffer
underflow and overflow when all of the following conditions are met:
- The buffer size (i.e. the second argument of getcwd) is 1 byte
- The current working directory is too long
- '/' is also mounted on the current working directory
Sequence of events:
- In sysdeps/unix/sysv/linux/getcwd.c, the syscall returns ENAMETOOLONG
because the linux kernel checks for name length before it checks
buffer size
- The code falls back to the generic getcwd in sysdeps/posix
- In the generic func, the buf[0] is set to '\0' on line 250
- this while loop on line 262 is bypassed:
while (!(thisdev == rootdev && thisino == rootino))
since the rootfs (/) is bind mounted onto the directory and the flow
goes on to line 449, where it puts a '/' in the byte before the
buffer.
- Finally on line 458, it moves 2 bytes (the underflowed byte and the
'\0') to the buf[0] and buf[1], resulting in a 1 byte buffer overflow.
- buf is returned on line 469 and errno is not set.
This resolves BZ #28769.
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
If any RPC fails, the reply port will already be deallocated.
__pthread_thread_terminate thus has to defer taking its name until the very last
__thread_terminate_release which doesn't reply a message. But then we
have to read from the pthread structure.
This introduces __pthread_dealloc_finish() which does the recording of
the thread termination, so the slot can be reused really only just before
the __thread_terminate_release call. Only the real thread can set it, so
let's decouple this from the pthread_state by just removing the
PTHREAD_TERMINATED state and add a terminated field.
We were getting
../scripts/evaluate-test.sh posix/annexc $? true false > /usr/src/glibc-upstream/build/posix/annexc.test-result
In file included from ../include/pthread.h:1,
from <stdin>:1:
../sysdeps/htl/include/pthread.h:7:62: error: missing binary operator before token "("
7 | # if defined __USE_EXTERN_INLINES && defined _LIBC && !IS_IN (libsupport)
| ^
In some cases (e.g QEMU, non-Intel/AMD CPU) the cache information can
not be retrieved and the corresponding values are set to 0.
Commit 2d651eb9265d ("x86: Move x86 processor cache info to
cpu_features") changed the behaviour in such case by defining the
__x86_shared_cache_size and __x86_data_cache_size variables to 0 instead
of using the default values. This cause an issue with the i686 SSE2
optimized bzero/routine which assumes that the cache size is at least
128 bytes, and otherwise tries to zero/set the whole address space minus
128 bytes.
Fix that by restoring the original code to only update
__x86_shared_cache_size and __x86_data_cache_size variables if the
corresponding cache sizes are not zero.
Fixes bug 28784
Fixes commit 2d651eb9265d
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
It is similar to epoll_wait, with the difference the timeout has
nanosecond resoluting by using struct timespec instead of int.
Although Linux interface only provides 64 bit time_t support, old
32 bit interface is also provided (so keep in sync with current
practice and to no force opt-in on 64 bit time_t).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The usage of internal static symbol for statically linked binaries
does not work correctly for objects built with -D_TIME_BITS=64,
since the internal definition does not provide the expected aliases.
This patch makes it to use the default stat functions instead (which
uses the default 64 time_t alias and types).
Checked on i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The content of the structure is only used internally, so we can make
__pthread_attr_getschedparam and __pthread_attr_setschedparam convert
between the public sched_param type and an internal __sched_param.
This allows to avoid to spuriously expose the sched_param type.
This fixes BZ #23088.
We have to drop the kernel_thread port from the thread structure, to
avoid pthread_kill's call to _hurd_thread_sigstate trying to reference
it and fail.
This is required so that the checks still work if $(early-cflags)
selects a different ISA level.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This ISA level covers the glibc build itself. <dl-hwcap-check.h>
cannot be used because this check (by design) happens before
DL_PLATFORM_INIT and the x86 CPU flags initialization.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This is required so that the checks still work if $(early-cflags)
selects a different ISA level.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
HAVE_X86_LAHF_SAHF is implied by x86-64-v2, and HAVE_X86_MOVBE by
x86-64-v3.
The individual flag does not appear in -fverbose-asm flag output
even if the ISA level implies it.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This patch adds following inputs:
0x1.bcab29da0e947p-54 0x1.bc41f4d2294b8p-54
0x1.a11891ec004d4p-348 0x1.814830510be26p-348
0x1.b836ed678be29p-588 0x1.b7be6f5a03a8cp-588
0x1.a83f842ef3f73p-633 0x1.a799d8a6677ep-633
to atan2 tests and updates x86_64 double atan2 ulps.
This fixes BZ #28765.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
Linux 5.16 has one new syscall, futex_waitv. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
The configure check for CAN_USE_REGISTER_ASM_EBP tried to compile a
simple function that uses %ebp as an inline assembly operand. If
compilation failed, CAN_USE_REGISTER_ASM_EBP was set 0, which
eventually had these consequences:
(1) %ebx was avoided as an inline assembly operand, with an
assembler macro hack to avoid unnecessary register moves.
(2) %ebp was avoided as an inline assembly operand, using an
out-of-line syscall function for 6-argument system calls.
(1) is no longer needed for any GCC version that is supported for
building glibc. %ebx can be used directly as a register operand.
Therefore, this commit removes the %ebx avoidance completely. This
avoids the assembler macro hack, which turns out to be incompatible
with the current Systemtap probe macros (which switch to .altmacro
unconditionally).
(2) is still needed in many build configurations. The existing
configure check cannot really capture that because the simple function
succeeds to compile, while the full glibc build still fails.
Therefore, this commit removes the check, the CAN_USE_REGISTER_ASM_EBP
macro, and uses the out-of-line syscall function for 6-argument system
calls unconditionally.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This patch fixes SSE4.2 libmvec atan2 function accuracy for following
inputs to less than 4 ulps.
{0x1.bcab29da0e947p-54,0x1.bc41f4d2294b8p-54} 4.19888 ulps
{0x1.b836ed678be29p-588,0x1.b7be6f5a03a8cp-588} 4.09889 ulps
This fixes BZ #28765.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The __convert_scm_timestamps() only updates the control message last
pointer for SOL_SOCKET type, so if the message control buffer contains
multiple ancillary message types the converted timestamp one might
overwrite a valid message.
The test check if the extra ancillary space is correctly handled
by recvmsg/recvmmsg, where if there is no extra space for the 64-bit
time_t converted message the control buffer should be marked with
MSG_TRUNC. It also check if recvmsg/recvmmsg handle correctly multiple
ancillary data.
Checked on x86_64-linux and on i686-linux-gnu on both 5.11 and
4.15 kernel.
Co-authored-by: Fabian Vogt <fvogt@suse.de>
The usage of internal static symbol for statically linked binaries
does not work correctly for objects built with -D_TIME_BITS=64,
since the internal definition does not provide the expected aliases.
This patch makes it to use the default stat functions instead (which
uses the default 64 time_t alias and types).
Checked on i686-linux-gnu.
Indicates the availability of enhanced counter virtualization extension
of armv8.6-a with self-synchronized virtual counter CNTVCTSS_EL0 usable
in userspace.
Fixes [BZ# 28755] for wcsncmp by redirecting length >= 2^56 to
__wcscmp_evex. For x86_64 this covers the entire address range so any
length larger could not possibly be used to bound `s1` or `s2`.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Fixes [BZ# 28755] for wcsncmp by redirecting length >= 2^56 to
__wcscmp_avx2. For x86_64 this covers the entire address range so any
length larger could not possibly be used to bound `s1` or `s2`.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Converting double precision constants to float is now affected by the
runtime dynamic rounding mode instead of being evaluated at compile
time with default rounding mode (except static object initializers).
This can change the computed result and cause performance regression.
The known correctness issues (increased ulp errors) are already fixed,
this patch fixes remaining cases of unnecessary runtime conversions.
Add float M_* macros to math.h as new GNU extension API. To avoid
conversions the new M_* macros are used and instead of casting double
literals to float, use float literals (only required if the conversion
is inexact).
The patch was tested on aarch64 where the following symbols had new
spurious conversion instructions that got fixed:
__clog10f
__gammaf_r_finite@GLIBC_2.17
__j0f_finite@GLIBC_2.17
__j1f_finite@GLIBC_2.17
__jnf_finite@GLIBC_2.17
__kernel_casinhf
__lgamma_negf
__log1pf
__y0f_finite@GLIBC_2.17
__y1f_finite@GLIBC_2.17
cacosf
cacoshf
casinhf
catanf
catanhf
clogf
gammaf_positive
Fixes bug 28713.
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
