C99 specifies that the EOF condition on a file is "sticky": once EOF
has been encountered, all subsequent reads should continue to return
EOF until the file is closed or something clears the "end-of-file
indicator" (e.g. fseek, clearerr). This is arguably a change from
C89, where the wording was ambiguous; the BSDs always had sticky EOF,
but the System V lineage would attempt to read from the underlying fd
again. GNU libc has followed System V for as long as we've been
using libio, but nowadays C99 conformance and BSD compatibility are
more important than System V compatibility.
You might wonder if changing the _underflow impls is sufficient to
apply the C99 semantics to all of the many stdio functions that
perform input. It should be enough to cover all paths to _IO_SYSREAD,
and the only other functions that call _IO_SYSREAD are the _seekoff
impls, which is OK because seeking clears EOF, and the _xsgetn impls,
which, as far as I can tell, are unused within glibc.
The test programs in this patch use a pseudoterminal to set up the
necessary conditions. To facilitate this I added a new test-support
function that sets up a pair of pty file descriptors for you; it's
almost the same as BSD openpty, the only differences are that it
allocates the optionally-returned tty pathname with malloc, and that
it crashes if anything goes wrong.
[BZ #1190]
[BZ #19476]
* libio/fileops.c (_IO_new_file_underflow): Return EOF immediately
if the _IO_EOF_SEEN bit is already set; update commentary.
* libio/oldfileops.c (_IO_old_file_underflow): Likewise.
* libio/wfileops.c (_IO_wfile_underflow): Likewise.
* support/support_openpty.c, support/tty.h: New files.
* support/Makefile (libsupport-routines): Add support_openpty.
* libio/tst-fgetc-after-eof.c, wcsmbs/test-fgetwc-after-eof.c:
New test cases.
* libio/Makefile (tests): Add tst-fgetc-after-eof.
* wcsmbs/Makefile (tests): Add tst-fgetwc-after-eof.
This completes the deprecation and removal of this inclusion, which
was begun in the 2.25 release.
* posix/sys/types.h: Don't include sys/sysmacros.h.
* misc/sys/sysmacros.h: Remove the conditional deprecation
warnings for the macros defined by this header.
This patch adds the narrowing add functions from TS 18661-1 to glibc's
libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all
configurations; f32addf64x, f32addf128, f64addf64x, f64addf128,
f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with
_Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for
the build infrastructure patch, tgmath.h support is deliberately
deferred, and FP_FAST_* macros are not applicable without optimized
function implementations.
Function implementations are added for all relevant pairs of formats
(including certain cases of a format and itself where more than one
type has that format). The main implementations use round-to-odd, or
a trivial computation in the case where both formats are the same or
where the wider format is IBM long double (in which case we don't
attempt to be correctly rounding). The sysdeps/ieee754/soft-fp
implementations use soft-fp, and are used automatically for
configurations without exceptions and rounding modes by virtue of
existing Implies files. As previously discussed, optimized versions
for particular architectures are possible, but not included.
i386 gets a special version of f32xaddf64 to avoid problems with
double rounding (similar to the existing fdim version), since this
function must round just once without an intermediate rounding to long
double. (No such special version is needed for any other function,
because the nontrivial functions use round-to-odd, which does the
intermediate computation with the rounding mode set to round-to-zero,
and double rounding is OK except in round-to-nearest mode, so is OK
for that intermediate round-to-zero computation.) mul and div will
need slightly different special versions for i386 (using round-to-odd
on long double instead of precision control) because of the
possibility of inexact intermediate results in the subnormal range for
double.
To reduce duplication among the different function implementations,
math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD
and NARROW_ADD_TRIVIAL.
In the trivial cases and for any architecture-specific optimized
implementations, the overhead of the errno setting might be
significant, but I think that's best handled through compiler built-in
functions rather than providing separate no-errno versions in glibc
(and likewise there are no __*_finite entry points for these function
provided, __*_finite effectively being no-errno versions at present in
most cases).
Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for
mips64 (all three ABIs, both hard and soft float) and powerpc with GCC
7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7.
* math/Makefile (libm-narrow-fns): Add add.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing add functions.
* math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW .
* math/gen-auto-libm-tests.c (test_functions): Add add.
* math/math-narrow.h (CHECK_NARROW_ADD): New macro.
(NARROW_ADD_ROUND_TO_ODD): Likewise.
(NARROW_ADD_TRIVIAL): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__faddl): New
macro.
(__daddl): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and
dadd.
(CFLAGS-nldbl-dadd.c): New variable.
(CFLAGS-nldbl-fadd.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_daddl.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl,
daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx.
* math/auto-libm-test-in: Add tests of add.
* math/auto-libm-test-out-narrow-add: New generated file.
* math/libm-test-narrow-add.inc: New file.
* sysdeps/i386/fpu/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fadd.c: Likewise.
* sysdeps/ieee754/float128/s_f32addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_daddl.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_faddl.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
We shipped 2.27 with libio.h and _G_config.h still installed but
issuing warnings when used. Let's stop installing them early in 2.28
so that we have plenty of time to think of another plan if there are
problems.
The public stdio.h had a genuine dependency on libio.h for the
complete definitions of FILE and cookie_io_functions_t, and a genuine
dependency on _G_config.h for the complete definitions of fpos_t and
fpos64_t; these are moved to single-type headers.
bits/types/struct_FILE.h also provides a handful of accessor and
bitflags macros so that code is not duplicated between bits/stdio.h
and libio.h. All the other _IO_ and _G_ names used by the public
stdio.h can be replaced with either public names or __-names.
In order to minimize the risk of breaking our own compatibility code,
bits/types/struct_FILE.h preserves the _IO_USE_OLD_IO_FILE mechanism
exactly as it was in libio.h, but you have to define _LIBC to use it,
or it'll error out. Similarly, _IO_lock_t_defined is preserved
exactly, but will error out if used without defining _LIBC.
Internally, include/stdio.h continues to include libio.h, and libio.h
scrupulously provides every _IO_* and _G_* name that it always did,
perhaps now defined in terms of the public names. This is how this
patch avoids touching dozens of files throughout glibc and becoming
entangled with the _IO_MTSAFE_IO mess. The remaining patches in this
series eliminate most of the _G_ names.
Tested on x86_64-linux; in addition to the test suite, I installed the
library in a sysroot and verified that a simple program that uses
stdio.h could be compiled against the installed library, and I also
verified that installed stripped libraries are unchanged.
* libio/bits/types/__fpos_t.h, libio/bits/types/__fpos64_t.h:
New single-type headers split from _G_config.h.
* libio/bits/types/cookie_io_functions_t.h
* libio/bits/types/struct_FILE.h
New single-type headers split from libio.h.
* libio/Makefile: Install the above new headers. Don't install
libio.h, _G_config.h, bits/libio.h, bits/_G_config.h, or
bits/libio-ldbl.h.
* libio/_G_config.h, libio/libio.h: Delete file.
* libio/bits/libio.h: Remove improper-inclusion guard.
Include stdio.h and don't repeat anything that it does.
Define _IO_fpos_t as __fpos_t, _IO_fpos64_t as __fpos64_t,
_IO_BUFSIZ as BUFSIZ, _IO_va_list as __gnuc_va_list,
__io_read_fn as cookie_read_function_t,
__io_write_fn as cookie_write_function_t,
__io_seek_fn as cookie_seek_function_t,
__io_close_fn as cookie_close_function_t,
and _IO_cookie_io_functions_t as cookie_io_functions_t.
Define _STDIO_USES_IOSTREAM, __HAVE_COLUMN, and _IO_file_flags
here, in the "compatibility defines" section. Remove an #if 0
block. Use the "body" macros from bits/types/struct_FILE.h to
define _IO_getc_unlocked, _IO_putc_unlocked, _IO_feof_unlocked,
and _IO_ferror_unlocked.
Move prototypes of __uflow and __overflow...
* libio/stdio.h: ...here. Don't include bits/libio.h.
Don't define _STDIO_USES_IOSTREAM. Get __gnuc_va_list
directly from stdarg.h. Include bits/types/__fpos_t.h,
bits/types/__fpos64_t.h, bits/types/struct_FILE.h,
and, when __USE_GNU, bits/types/cookie_io_functions_t.h.
Use __gnuc_va_list, not _G_va_list; __fpos_t, not _G_fpos_t;
__fpos64_t, not _G_fpos64_t; FILE, not struct _IO_FILE;
cookie_io_functions_t, not _IO_cookie_io_functions_t;
__ssize_t, not _IO_ssize_t. Unconditionally define
BUFSIZ as 8192 and EOF as (-1).
* libio/bits/stdio.h: Add multiple-include guard. Use the "body"
macros from bits/types/struct_FILE.h instead of _IO_* macros
from libio.h; use __gnuc_va_list instead of va_list and __ssize_t
instead of _IO_ssize_t.
* libio/bits/stdio2.h: Similarly.
* libio/iolibio.h: Add multiple-include guard.
Include bits/libio.h after stdio.h.
* libio/libioP.h: Add multiple-include guard.
Include stdio.h and bits/libio.h before iolibio.h.
* include/bits/types/__fpos_t.h, include/bits/types/__fpos64_t.h
* include/bits/types/cookie_io_functions_t.h
* include/bits/types/struct_FILE.h: New wrappers.
* bits/_G_config.h, sysdeps/unix/sysv/linux/_G_config.h:
Get definitions of _G_fpos_t and _G_fpos64_t from
bits/types/__fpos_t.h and bits/types/__fpos64_t.h
respectively. Remove improper-inclusion guards.
* conform/data/stdio.h-data: Update expectations of va_list.
* scripts/check-installed-headers.sh: Remove special case for
libio.h and _G_config.h.
The getc and putc macros in the public stdio.h expand to call _IO_getc
and _IO_putc respectively. As _IO_getc, fgetc, and getc are all aliases
for the same function, and _IO_putc, fputc, and putc are also all aliases
for the same function, the macros are pointless. The C standard does
not require getc and putc to be macros, so let's just not have macros.
All four symbols are exported from libc.so at the same, ancient symbol
version, so there should be no risks for binary compatibility. Similarly,
the getchar and putchar inlines in bits/stdio.h forward to getc and putc
instead of their _IO_ aliases.
As a change from longstanding historical practice, this does seem
like it might break _something_, so there is a note in NEWS, which
is also a convenient place to advise people that if they thought getc
and putc had reduced per-character overhead they should consider using
getc_unlocked and putc_unlocked instead. (These are also not macros,
but when optimizing, they are inlines.)
* libio/stdio.h: Don't define getc or putc as macros.
* libio/bits/stdio.h (getchar, putchar): Use getc and putc,
not _IO_getc and _IO_putc.
[BZ #10871]
* NEWS: List the languages which actually use the alternative
months feature in this release. Also explain that "alt_mon" and
"ab_alt_mon" are optional.
During the upstreaming process it was suggested that I add a handful of
small documentation entries about the RISC-V port, which I've collected
here.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* manual/math.texi: RISC-V supports _Float128 and _Float64x.
[BZ #10871]
* manual/locale.texi: Document ALTMON_1..12 constants for
nl_langinfo. Specify when to use ALTMON instead of MON.
* manual/time.texi (strftime, strptime): Document GNU extension
permitting O modifier with %B and %b. Specify when to use
%OB instead of %B.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Currently getcwd(3) can succeed without returning an absolute path
because the underlying getcwd syscall, starting with linux commit
v2.6.36-rc1~96^2~2, may succeed without returning an absolute path.
This is a conformance issue because "The getcwd() function shall
place an absolute pathname of the current working directory
in the array pointed to by buf, and return buf".
This is also a security issue because a non-absolute path returned
by getcwd(3) causes a buffer underflow in realpath(3).
Fix this by checking the path returned by getcwd syscall and falling
back to generic_getcwd if the path is not absolute, effectively making
getcwd(3) fail with ENOENT. The error code is chosen for consistency
with the case when the current directory is unlinked.
[BZ #22679]
CVE-2018-1000001
* sysdeps/unix/sysv/linux/getcwd.c (__getcwd): Fall back to
generic_getcwd if the path returned by getcwd syscall is not absolute.
* io/tst-getcwd-abspath.c: New test.
* io/Makefile (tests): Add tst-getcwd-abspath.
Since the x86-64 assembly version of sincosf is higly optimized with
vector instructions, there isn't much room for improvement. However
s_sincosf.c written in C with vector math and intrinsics can be
optimized by GCC with FMA.
On Skylake, bench-sincosf reports performance improvement:
Assembly FMA improvement
max 104.042 101.008 3%
min 9.426 8.586 10%
mean 20.6209 18.2238 13%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sincosf-sse2 and s_sincosf-fma.
(CFLAGS-s_sincosf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-sse2.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sincosf.c: Likewise.
* sysdeps/x86_64/fpu/s_sincosf.S: Don't add alias if
__sincosf is defined.
The fillin_rpath function in elf/dl-load.c loops over each RPATH or
RUNPATH tokens and interprets empty tokens as the current directory
("./"). In practice the check for empty token is done *after* the
dynamic string token expansion. The expansion process can return an
empty string for the $ORIGIN token if __libc_enable_secure is set
or if the path of the binary can not be determined (/proc not mounted).
Fix that by moving the check for empty tokens before the dynamic string
token expansion. In addition, check for NULL pointer or empty strings
return by expand_dynamic_string_token.
The above changes highlighted a bug in decompose_rpath, an empty array
is represented by the first element being NULL at the fillin_rpath
level, but by using a -1 pointer in decompose_rpath and other functions.
Changelog:
[BZ #22625]
* elf/dl-load.c (fillin_rpath): Check for empty tokens before dynamic
string token expansion. Check for NULL pointer or empty string possibly
returned by expand_dynamic_string_token.
(decompose_rpath): Check for empty path after dynamic string
token expansion.
libio.h was originally the header for a set of supported GNU
extensions, but they have not been maintained as such in many years,
they are now standing in the way of improvements to stdio, and we
don't think there are any remaining external users. _G_config.h was
never intended for public use, but predates the bits convention.
Move both of these headers into the bits directory and provide stubs
at top level which issue deprecation warnings.
The contents of (bits/)libio.h and (bits/)_G_config.h are still
exposed to external software via stdio.h; changing that requires more
complex surgery than I have time to attempt right now.
* libio/libio.h, libio/_G_config.h: New stub headers which issue a
deprecation warning and then include <bits/libio.h>, <bits/_G_config.h>
respectively.
* libio/libio.h: Rename the original version of this file to
libio/bits/libio.h. Error out if not included by stdio.h or the
stub libio.h.
* include/libio.h: Move to include/bits. Forward to libio/bits/libio.h.
* sysdeps/generic/_G_config.h: Move to top-level bits/. Error out
if not included by bits/libio.h or the stub _G_config.h.
* sysdeps/unix/sysv/linux/_G_config.h: Move to
sysdeps/unix/sysv/linux/bits. Error out if not included by
bits/libio.h or the stub _G_config.h.
* libio/stdio.h: Include bits/libio.h, not libio.h.
* libio/Makefile: Install bits/libio.h and bits/_G_config.h as
well as libio.h and _G_config.h.
* csu/init.c, libio/fmemopen.c, libio/iolibio.h, libio/oldfmemopen.c
* libio/strfile.h, stdio-common/vfscanf.c
* sysdeps/pthread/flockfile.c, sysdeps/pthread/funlockfile.c
Include stdio.h, not _G_config.h nor libio.h.
* libio/iofgetpos.c: Also rename fgetpos64 out of the way.
* libio/iofsetpos.c: Also rename fsetpos64 out of the way.
* scripts/check-installed-headers.sh: Skip libio.h and _G_config.h.
ldconfig supports `include' directives and use the glob function to
process them. The glob function sort entries according to the LC_COLLATE
category. When using a standard "include /etc/ld.so.conf.d/*.conf" entry
in /etc/ld.so.conf, the order therefore depends on the locale used to
run ldconfig. A few examples of locale specific order that might be
disturbing in that context compared to the C locale:
- The cs_CZ and sk_SK locales sort the digits after the letters.
- The et_EE locale sorts the 'z' between 's' and 't'.
This patch fixes that by setting LC_COLLATE to C in order to process
files in deterministic order, independently of the locale used to launch
ldconfig.
NOTE: This should NOT be backported to older release branches.
Changelog:
[BZ #22505]
* elf/ldconfig.c (main): Call setlocale to force LC_COLLATE to C.
Static PIE extends address space layout randomization to static
executables. It provides additional security hardening benefits at
the cost of some memory and performance.
Dynamic linker, ld.so, is a standalone program which can be loaded at
any address. This patch adds a configure option, --enable-static-pie,
to embed the part of ld.so in static executable to create static position
independent executable (static PIE). A static PIE is similar to static
executable, but can be loaded at any address without help from a dynamic
linker. When --enable-static-pie is used to configure glibc, libc.a is
built as PIE and all static executables, including tests, are built as
static PIE. The resulting libc.a can be used together with GCC 8 or
above to build static PIE with the compiler option, -static-pie. But
GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC
with PIE support is needed. When an older GCC is used to build glibc
with --enable-static-pie, proper input files are passed to linker to
create static executables as static PIE, together with "-z text" to
prevent dynamic relocations in read-only segments, which are not allowed
in static PIE.
The following changes are made for static PIE:
1. Add a new function, _dl_relocate_static_pie, to:
a. Get the run-time load address.
b. Read the dynamic section.
c. Perform dynamic relocations.
Dynamic linker also performs these steps. But static PIE doesn't load
any shared objects.
2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in
libc.a. crt1.o, which is used to create dynamic and non-PIE static
executables, is updated to include a dummy _dl_relocate_static_pie.
rcrt1.o is added to create static PIE, which will link in the real
_dl_relocate_static_pie. grcrt1.o is also added to create static PIE
with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for
static PIE.
Static PIE can work on all architectures which support PIE, provided:
1. Target must support accessing of local functions without dynamic
relocations, which is needed in start.S to call __libc_start_main with
function addresses of __libc_csu_init, __libc_csu_fini and main. All
functions in static PIE are local functions. If PIE start.S can't reach
main () defined in a shared object, the code sequence:
pass address of local_main to __libc_start_main
...
local_main:
tail call to main via PLT
can be used.
2. start.S is updated to check PIC instead SHARED for PIC code path and
avoid dynamic relocation, when PIC is defined and SHARED isn't defined,
to support static PIE.
3. All assembly codes are updated check PIC instead SHARED for PIC code
path to avoid dynamic relocations in read-only sections.
4. All assembly codes are updated check SHARED instead PIC for static
symbol name.
5. elf_machine_load_address in dl-machine.h are updated to support static
PIE.
6. __brk works without TLS nor dynamic relocations in read-only section
so that it can be used by __libc_setup_tls to initializes TLS in static
PIE.
NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled
with -fPIE, regardless if --enable-static-pie is used to configure glibc.
When glibc is configured with --enable-static-pie, libc.a is compiled
with -fPIE, regardless whether GCC defaults to PIE or not. The same
libc.a can be used to build both static executable and static PIE.
There is no need for separate PIE copy of libc.a.
On x86-64, the normal static sln:
text data bss dec hex filename
625425 8284 5456 639165 9c0bd elf/sln
the static PIE sln:
text data bss dec hex filename
657626 20636 5392 683654 a6e86 elf/sln
The code size is increased by 5% and the binary size is increased by 7%.
Linker requirements to build glibc with --enable-static-pie:
1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from
static PIE.
2. Linker can create working static PIE. The x86-64 linker needs the
fix for
https://sourceware.org/bugzilla/show_bug.cgi?id=21782
The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax"
to "leal main@GOTOFF(%ebx), %eax" if main is defined locally.
Binutils 2.29 or above are OK for i686 and x86-64. But linker status for
other targets need to be verified.
3. Linker should resolve undefined weak symbols to 0 in static PIE:
https://sourceware.org/bugzilla/show_bug.cgi?id=22269
4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS
relocations, which should check bfd_link_executable instead:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Tested on aarch64, i686 and x86-64.
Using GCC 7 and binutils master branch, build-many-glibcs.py with
--enable-static-pie with all patches for static PIE applied have the
following build successes:
PASS: glibcs-aarch64_be-linux-gnu build
PASS: glibcs-aarch64-linux-gnu build
PASS: glibcs-armeb-linux-gnueabi-be8 build
PASS: glibcs-armeb-linux-gnueabi build
PASS: glibcs-armeb-linux-gnueabihf-be8 build
PASS: glibcs-armeb-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabi build
PASS: glibcs-arm-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabihf-v7a build
PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build
PASS: glibcs-m68k-linux-gnu build
PASS: glibcs-microblazeel-linux-gnu build
PASS: glibcs-microblaze-linux-gnu build
PASS: glibcs-mips64el-linux-gnu-n32 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n32-soft build
PASS: glibcs-mips64el-linux-gnu-n64 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n64-soft build
PASS: glibcs-mips64-linux-gnu-n32 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n32-soft build
PASS: glibcs-mips64-linux-gnu-n64 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n64-soft build
PASS: glibcs-mipsel-linux-gnu build
PASS: glibcs-mipsel-linux-gnu-nan2008 build
PASS: glibcs-mipsel-linux-gnu-nan2008-soft build
PASS: glibcs-mipsel-linux-gnu-soft build
PASS: glibcs-mips-linux-gnu build
PASS: glibcs-mips-linux-gnu-nan2008 build
PASS: glibcs-mips-linux-gnu-nan2008-soft build
PASS: glibcs-mips-linux-gnu-soft build
PASS: glibcs-nios2-linux-gnu build
PASS: glibcs-powerpc64le-linux-gnu build
PASS: glibcs-powerpc64-linux-gnu build
PASS: glibcs-tilegxbe-linux-gnu-32 build
PASS: glibcs-tilegxbe-linux-gnu build
PASS: glibcs-tilegx-linux-gnu-32 build
PASS: glibcs-tilegx-linux-gnu build
PASS: glibcs-tilepro-linux-gnu build
and the following build failures:
FAIL: glibcs-alpha-linux-gnu build
elf/sln is failed to link due to:
assertion fail bfd/elf64-alpha.c:4125
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-hppa-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
https://sourceware.org/bugzilla/show_bug.cgi?id=22537
FAIL: glibcs-ia64-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
FAIL: glibcs-powerpc-linux-gnu build
FAIL: glibcs-powerpc-linux-gnu-soft build
FAIL: glibcs-powerpc-linux-gnuspe build
FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22264
FAIL: glibcs-powerpc-linux-gnu-power4 build
elf/sln is failed to link due to:
findlocale.c:96:(.text+0x22c): @local call to ifunc memchr
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-s390-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped
assertion fail bfd/elflink.c:14299
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-sh3eb-linux-gnu build
FAIL: glibcs-sh3-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu-soft build
FAIL: glibcs-sh4-linux-gnu build
FAIL: glibcs-sh4-linux-gnu-soft build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS
code sequence expected by ld:
https://sourceware.org/bugzilla/show_bug.cgi?id=22270
FAIL: glibcs-sparc64-linux-gnu build
FAIL: glibcs-sparcv9-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu-32 build
FAIL: glibcs-tilegx-linux-gnu build
FAIL: glibcs-tilegx-linux-gnu-32 build
FAIL: glibcs-tilepro-linux-gnu build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
[BZ #19574]
* INSTALL: Regenerated.
* Makeconfig (real-static-start-installed-name): New.
(pic-default): Updated for --enable-static-pie.
(pie-default): New for --enable-static-pie.
(default-pie-ldflag): Likewise.
(+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F))
with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)).
Replace $(static-start-installed-name) with
$(real-static-start-installed-name).
(+prectorT): Updated for --enable-static-pie.
(+postctorT): Likewise.
(CFLAGS-.o): Add $(pie-default).
(CFLAGS-.op): Likewise.
* NEWS: Mention --enable-static-pie.
* config.h.in (ENABLE_STATIC_PIE): New.
* configure.ac (--enable-static-pie): New configure option.
(have-no-dynamic-linker): New LIBC_CONFIG_VAR.
(have-static-pie): Likewise.
Enable static PIE if linker supports --no-dynamic-linker.
(ENABLE_STATIC_PIE): New AC_DEFINE.
(enable-static-pie): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* csu/Makefile (omit-deps): Add r$(start-installed-name) and
gr$(start-installed-name) for --enable-static-pie.
(extra-objs): Likewise.
(install-lib): Likewise.
(extra-objs): Add static-reloc.o and static-reloc.os
($(objpfx)$(start-installed-name)): Also depend on
$(objpfx)static-reloc.o.
($(objpfx)r$(start-installed-name)): New.
($(objpfx)g$(start-installed-name)): Also depend on
$(objpfx)static-reloc.os.
($(objpfx)gr$(start-installed-name)): New.
* csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie
in libc.a.
* csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to
initimage.
* csu/static-reloc.c: New file.
* elf/Makefile (routines): Add dl-reloc-static-pie.
(elide-routines.os): Likewise.
(DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed.
(tst-tls1-static-non-pie-no-pie): New.
* elf/dl-reloc-static-pie.c: New file.
* elf/dl-support.c (_dl_get_dl_main_map): New function.
* elf/dynamic-link.h (ELF_DURING_STARTUP): Also check
STATIC_PIE_BOOTSTRAP.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* gmon/Makefile (tests): Add tst-gmon-static-pie.
(tests-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Removed.
(tst-gmon-static-no-pie): New.
(CFLAGS-tst-gmon-static-pie.c): Likewise.
(CRT-tst-gmon-static-pie): Likewise.
(tst-gmon-static-pie-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static-pie.out): Likewise.
(clean-tst-gmon-static-pie-data): Likewise.
($(objpfx)tst-gmon-static-pie-gprof.out): Likewise.
* gmon/tst-gmon-static-pie.c: New file.
* manual/install.texi: Document --enable-static-pie.
* sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New.
(_dl_get_dl_main_map): Likewise.
* sysdeps/i386/configure.ac: Check if linker supports static PIE.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default).
(ASFLAGS-.op): Likewise.
Support added to identify Sparc M7/T7/S7/M8/T8 processor capability.
Performance tests run on Sparc S7 using new code and old niagara4 code.
Optimizations for memset also apply to bzero as they share code.
For memset/bzero, performance comparison with niagara4 code:
For memset nonzero data,
256-1023 bytes - 60-90% gain (in cache); 5% gain (out of cache)
1K+ bytes - 80-260% gain (in cache); 40-80% gain (out of cache)
For memset zero data (and bzero),
256-1023 bytes - 80-120% gain (in cache), 0% gain (out of cache)
1024+ bytes - 2-4x gain (in cache), 10-35% gain (out of cache)
Tested in sparcv9-*-* and sparc64-*-* targets in both multi and
non-multi arch configurations.
Patrick McGehearty <patrick.mcgehearty@oracle.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
(sysdeps_routines): Add memset-niagara7.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdes_rotuines):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memset-niagara7.S: New
file.
* sysdeps/sparc/sparc64/multiarch/memset-niagara7.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add __bzero_niagara7 and __memset_niagara7.
* sysdeps/sparc/sparc64/multiarch/ifunc-memset.h (IFUNC_SELECTOR):
Add niagara7 option.
* NEWS: Mention sparc m7 optimized memcpy, mempcpy, memmove, and
memset.
There is a configure option --without-fp that specifies that nofpu
sysdeps directories should be used instead of fpu directories.
For most glibc configurations, this option is of no use: either there
is no valid nofpu variant of that configuration, or there are no fpu
or nofpu sysdeps directories for that processor and so the option does
nothing. For a few configurations, if you are using a soft-float
compiler this option is required, and failing to use it generally
results in compilation errors from inline asm using unavailable
floating-point instructions.
We're moving away from --with-cpu to configuring glibc based on how
the compiler generates code, and it is natural to do so for
--without-fp as well; in most cases the soft-float and hard-float ABIs
are incompatible so you have no hope of building a working glibc with
an inappropriately configured compiler or libgcc.
This patch eliminates --without-fp, replacing it entirely by automatic
configuration based on the compiler. Configurations for which this is
relevant (coldfire / mips / powerpc32 / sh) define a variable
with_fp_cond in their preconfigure fragments (under the same
conditions under which those fragments do anything); this is a
preprocessor conditional which the toplevel configure script then uses
in a test to determine which sysdeps directories to use.
The config.make with-fp variable remains. It's used only by powerpc
(sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various
flags variables. For powerpc, -mcpu= options can imply use of
soft-float. That could be an issue if you want to build for
e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp
sysdeps directory. If in future we eliminate --with-cpu and replace
it entirely by testing the compiler, it would be natural at that point
to eliminate that code as well (as the user should then just use a
compiler defaulting to 476fp and the 476 sysdeps directory would be
used automatically).
Tested for x86_64, and tested with build-many-glibcs.py that installed
shared libraries are unchanged by this patch.
* configure.ac (--with-fp): Remove configure option.
(with_fp_cond): New variable.
(libc_cv_with_fp): New configure test. Use this variable instead
of with_fp.
* configure: Regenerated.
* config.make.in (with-fp): Use @libc_cv_with_fp@.
* manual/install.texi (Configuring and compiling): Remove
--without-fp.
* INSTALL: Regenerated.
* sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire.
* sysdeps/mips/preconfigure (with_fp_cond): Define.
* sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit.
* sysdeps/sh/preconfigure (with_fp_cond): Define.
* scripts/build-many-glibcs.py (Context.add_all_configs): Do not
use --without-fp to configure glibc.
On Skylake, bench-sinf reports performance improvement:
Before After Improvement
max 153.996 100.094 54%
min 8.546 6.852 25%
mean 18.1223 11.802 54%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sinf-sse2 and s_sinf-fma.
(CFLAGS-s_sinf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sinf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sinf-sse2.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sinf.c: Likewise.
This patch continues filling out TS 18661-3 support by adding *f64 and
*f32x function aliases, supporting _Float64 and _Float32x, as aliases
for double functions. These types are supported for all glibc
configurations. The API corresponds exactly to that for _Float128 and
_Float64x. _Float32 aliases to float functions remain to be added in
subsequent patches to complete this process (then there are a few
miscellaneous functions in TS 18661-3 to implement that aren't simply
versions of existing functions for new types).
The patch enables the feature in bits/floatn-common.h, adds symbol
versions and documentation with updates to ABI baselines, and arranges
for the libm functions for the new types to be tested. As with the
_Float64x changes there are some x86 ulps updates because of header
inlines not used for the new types (and one other change to the
non-multiarch libm-test-ulps, which I suppose comes from using a
different compiler version / configuration from when it was last
regenerated).
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT64): Define to 1.
(__HAVE_FLOAT32X): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64
and _Float32x.
* math/Makefile (test-types): Add float64 and float32x.
* math/Versions (GLIBC_2.27): Add _Float64 and _Float32x
functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
This adds system call wrappers for pkey_alloc, pkey_free, pkey_mprotect,
and x86-64 implementations of pkey_get and pkey_set, which abstract over
the PKRU CPU register and hide the actual number of memory protection
keys supported by the CPU. pkey_mprotect with a -1 key is implemented
using mprotect, so it will work even if the kernel does not support the
pkey_mprotect system call.
The system call wrapers use unsigned int instead of unsigned long for
parameters, so that no special treatment for x32 is needed. The flags
argument is currently unused, and the access rights bit mask is limited
to two bits by the current PKRU register layout anyway.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
There is a subtle non-determinism when building glibc.
This depends on whether the glibc is built using the distibuted
file intl/plural.c or built using the generated file intl/plural.c.
These two files (intl/plural.c generated vs. distributed) are slightly
different, hence we may end up with slightly different libraries.
Originally, having "bison" installed was optional. So if "bison" was
not present, we always built libraries with the distributed plural.c.
If bison was installed, we *** may have *** replaced the distributed
file plural.c with a new plural.c generated from plural.y. if the
timestamps triggered this rule:
plural.c plural.y
$(BISON) $(BISONFLAGS) $@ $^
Given that timestamps are not preserved in GIT repositories, the above
rule is not reliable without explicitly touching plural.c or plural.y.
In other words, the rule may or may not have fired.
In summary: there are two distinct sources of non-determinism:
1. Having "bison" installed or not
2. Having "bison" installed but timestamps poorly defined.
This patch fixes this by requiring "bison" being installed
and by always generating intl/plural.c from intl/plural.y.
(This is achieved by simply removing checked-in intl/plural.c)
[BZ #22432]
* configure.ac (BISON): Require to be present.
* configure: Regenerated.
* intl/Makefile (generated): Add plural.c.
[$(BISON) != no]: Make code unconditional.
(plural.c): Change rule to $(objpfx)plural.c.
($(objpfx)plural.o): Depend on $(objpfx)plural.c.
* intl/plural.c: Remove.
* manual/install.texi (Tools for Compilation): Document bison as
required.
* INSTALL: Regenerated.
This patch continues filling out TS 18661-3 support by adding *f64x
function aliases on platforms with _Float64x support. (It so happens
the set of such platforms is exactly the same as the set of platforms
with _Float128 support, although on x86_64, x86 and ia32 the _Float64x
format is Intel extended rather than binary128.) The API provided
corresponds exactly to that provided for _Float128, mostly coming from
TS 18661-3. As these functions always alias those for another type
(long double, _Float128 or both), __* function names are not provided,
as in other cases of alias types.
Given the preparation done in previous patches, this one just enables
the feature via Makeconfig and bits/floatn.h, adds symbol versions,
and updates documentation and ABI baselines. The symbol versions are
present unconditionally as GLIBC_2.27 in the relevant Versions files,
as it's OK for those to specify versions for functions that may not be
present in some configurations; no additional complexity is needed
unless in future some configuration gains support for this type that
didn't have such support in 2.27. The Makeconfig additions for ia64
and x86 aren't strictly needed, as those configurations also get
float64x-alias-fcts definitions from
sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given
that _Float64x is not _Float128 for those configurations.
A libm-test-ulps update for x86 is included. This is because
bits/mathinline.h does not have _Float64x support added and for two
functions the use of out-of-line functions results in increased ulps
(ifloat64x shares ulps with ildouble / ifloat128 as appropriate).
Given that we'd like generally to eliminate bits/mathinline.h
optimizations, preferring to have such optimizations in GCC instead,
it seems reasonable not to add such support there for new types. GCC
support for _FloatN / _FloatNx built-in functions is limited, but has
been improved in GCC 8, and at some point I hope the full set of libm
built-in functions in GCC, and other optimizations with
per-floating-type aspects, will be enabled for all _FloatN / _FloatNx
types.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable.
* sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/x86/Makeconfig: New file.
* bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* bits/floatn.h (__HAVE_FLOAT64X): New macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X):
Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64x.
* math/Versions (GLIBC_2.27): Add _Float64x functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
The system call is somewhat obscure because it is closely related
to file descriptor sealing. However, it is also the recommended
way to create alias mappings, which is why it has more general use.
No emulation is provided. Except for the name of the
/proc/self/fd links, it would be possible to implement an
approximation using O_TMPFILE and tmpfs, but this does not appear
to be worth the added complexity.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
This patch, relative to a tree with
<https://sourceware.org/ml/libc-alpha/2017-11/msg00797.html> (pending
review) applied, obsoletes p_secstodate, making the underlying
function __p_secstodate into a compat symbol not available for new
binaries or ports. The calls in ns_print.c (part of incomplete
handling of TKEY) are changed to use %lu to print times instead of
trying to pretty-print the times any more.
Tested for x86_64.
* resolv/res_debug.c (p_secstodate): Condition definition on
[SHLIB_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)]. Define
directly as __p_secstodate, and as a compat symbol. Do not use
libresolv_hidden_def.
* resolv/resolv.h (p_secstodate): Remove macro and function
declaration.
* resolv/ns_print.c (ns_sprintrrf): Print times with %lu, not
using p_secstodate.
* include/resolv.h (__p_secstodate): Do not use
libresolv_hidden_proto.
* resolv/Makefile (tests): Move tst-p_secstodate to ....
(tests-internal): ... here.
* resolv/tst-p_secstodate.c: Include <shlib-compat.h>. Condition
all contents on [TEST_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)]
and declare and use __p_secstodate and use compat_symbol_reference
in that case.
[!TEST_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)] (do_test): Add
implementation returning 77.
Update all sourceware links to https. The website redirects
everything to https anyway so let the web server do a bit less work.
The only reference that remains unchanged is the one in the old
ChangeLog, since it didn't seem worth changing it.
* NEWS: Update sourceware link to https.
* configure.ac: Likewise.
* crypt/md5test-giant.c: Likewise.
* dlfcn/bug-atexit1.c: Likewise.
* dlfcn/bug-atexit2.c: Likewise.
* localedata/README: Likewise.
* malloc/tst-mallocfork.c: Likewise.
* manual/install.texi: Likewise.
* nptl/tst-pthread-getattr.c: Likewise.
* stdio-common/tst-fgets.c: Likewise.
* stdio-common/tst-fwrite.c: Likewise.
* sunrpc/Makefile: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy_impl.S: Likewise.
* wcsmbs/tst-mbrtowc2.c: Likewise.
* configure: Regenerate.
* INSTALL: Regenerate.
This commit adds a "subheaps" field to the malloc_info output that
shows the number of heaps that were allocated to extend a non-main
arena.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
res_hnok rejected some host names used on the Internet, such as
www-.example.com. res_hnok and res_dnok failed to perform basic syntax
checking on DNS domain names.
Also fix res_mailok, res_ownok.
This patch adds support for *f128 function aliases on platforms where
long double has the binary128 format (and thus GCC 7 provides the
_Float128 type with the same ABI as long double but as a distinct type
in terms of C type compatibility). This is the same API as provided
in glibc 2.26 for powerpc64le / x86_64 / x86 / ia64 where _Float128
has a different format from long double, with the bulk of the API
coming from TS 18661-3. All the functions alias the corresponding
long double functions, and __* function names are not provided since
those are only needed once for each floating-point format, not more
than once for different types with the same format (so for example,
-ffinite-math-only maps foof128 to __fool_finite, while type-generic
macros end up calling e.g. __issignalingl for _Float128 arguments on
such platforms).
The preparation for this feature was done in previous patches, so this
one just needs to add the relevant makefile and header definitions,
and update macro definitions of libm_alias_ldouble_other_r, to turn on
the feature, and update documentation and ABI baselines.
Tested (a) for x86_64, (b) for aarch64, (c) with build-many-glibcs.py
with both GCC 6 and GCC 7.
* sysdeps/ieee754/ldbl-128/Makeconfig: New file.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/float128-abi.h: Likewise.
* sysdeps/generic/libm-alias-ldouble.h: Include <bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Include
<bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* manual/math.texi (Mathematics): Document additional architecture
support for _Float128.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
glibc has an add-ons mechanism to allow additional software to be
integrated into the glibc build. Such add-ons may be within the glibc
source tree, or outside it at a path passed to the --enable-add-ons
configure option.
localedata and crypt were once add-ons, distributed in separate
release tarballs, but long since stopped using that mechanism.
Linuxthreads was always an add-on. Ports spent some time as an add-on
with separate release tarballs, then was first moved into the glibc
source tree, then had its sysdeps files moved into the main sysdeps
hierarchy so the add-ons mechanism was no longer used. NPTL spent
some time as an add-on in the main glibc tree before stopping using
the add-on mechanism. libidn used to have separate release tarballs
but no longer does so, but still uses the add-ons mechanism within the
glibc source tree. Various other software has supported building with
the add-ons mechanism at times in the past, but I don't think any is
still widely used.
Add-ons involve significant, little-used complexity in the glibc build
system, and make it hard to understand what the space of possible
glibc configurations is. This patch removes the add-ons mechanism.
libidn is now built via the Subdirs mechanism to cause any
configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN
(which effectively means shared libraries are available) is now
defined via sysdeps/unix/inet/configure. Various references to
add-ons around the source tree are removed (in the case of maint.texi,
the example list of sysdeps directories is still very out of date).
Externally maintained ports should now put their files in the normal
sysdeps directory structure rather than being arranged as add-ons;
they probably need to change e.g. elf.h anyway, rather than actually
being able to work just as a drop-in subtree. Hurd libpthread should
be arranged similarly to NPTL, so some files might go in a
hurd-pthreads (or similar) top-level directory in glibc, while sysdeps
files should go in the normal sysdeps directory structure (possibly in
hurd or hurd-pthreads subdirectories, just as there are nptl
subdirectories in the sysdeps tree).
Tested for x86_64, and with build-many-glibcs.py.
* configure.ac (--enable-add-ons): Remove option.
(machine): Do not mention add-ons in comment.
(LIBC_PRECONFIGURE): Likewise.
(add_ons): Remove variable and sanity checks and logic to locate
add-ons.
(add_ons_automatic): Remove variable.
(configured_add_ons): Likewise.
(add_ons_sfx): Likewise.
(add_ons_pfx): Likewise.
(add_on_subdirs): Likewise.
(sysnames_add_ons): Likewise. Remove loop over add-ons and
consideration of add-ons in Implies handling.
(sysdeps_add_ons): Likewise.
* configure: Regenerated.
* libidn/configure.ac: Remove.
* libidn/configure: Likewise.
* sysdeps/unix/inet/configure.ac: New file.
* sysdeps/unix/inet/configure: New generated file.
* sysdeps/unix/inet/Subdirs: Add libidn.
* Makeconfig (sysdeps-srcdirs): Remove variable.
(+sysdep_dirs): Do not include $(sysdeps-srcdirs).
($(common-objpfx)config.status): Do not depend on add-on files.
($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in
comment.
(all-subdirs): Do not include $(add-on-subdirs).
* Makefile (dist-prepare): Do not use $(sysdeps-add-ons).
* config.make.in (add-ons): Remove variable.
(add-on-subdirs): Likewise.
(sysdeps-add-ons): Likewise.
* manual/Makefile (add-chapters): Remove.
($(objpfx)texis): Do not depend on $(add-chapters).
(nonexamples): Do not handle $(add-chapters).
(examples): Do not handle $(add-ons).
(chapters.% top-menu.%): Do not pass '$(add-chapters)' to
libc-texinfo.sh.
* manual/install.texi (Installation): Do not mention add-ons.
(--enable-add-ons): Do not document configure option.
* INSTALL: Regenerated.
* manual/libc-texinfo.sh: Do not handle $2 add-ons argument.
* manual/maint.texi (Hierarchy Conventions): Do not mention
add-ons.
* scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use
--enable-add-ons.
* scripts/gen-sorted.awk: Do not handle Subdirs files from
add-ons.
* scripts/test-installation.pl: Do not handle glibc-compat add-on.
* sysdeps/nptl/Makeconfig: Do not mention add-ons in comment.
without wrapper on aarch64:
powf reciprocal-throughput: 4.2x faster
powf latency: 2.6x faster
old worst-case error: 1.11 ulp
new worst-case error: 0.82 ulp
aarch64 .text size: -780 bytes
aarch64 .rodata size: +144 bytes
powf(x,y) is implemented as exp2(y*log2(x)) with the same algorithms
that are used in exp2f and log2f, except that the log2f polynomial is
larger for extra precision and its output (and exp2f input) may be
scaled by a power of 2 (POWF_SCALE) to simplify the argument reduction
step of exp2 (possible when efficient round and convert toint operation
is available).
The special case handling tries to minimize the checks in the hot path.
When the input of exp2_inline is checked, int arithmetics is used as
that was faster on the tested aarch64 cores.
* math/Makefile (type-float-routines): Add e_powf_log2_data.
* sysdeps/ieee754/flt-32/e_powf.c: New implementation.
* sysdeps/ieee754/flt-32/e_powf_log2_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h (__powf_log2_data): Define.
(issignalingf_inline): Likewise.
(POWF_LOG2_TABLE_BITS): Likewise.
(POWF_LOG2_POLY_ORDER): Likewise.
(POWF_SCALE_BITS): Likewise.
(POWF_SCALE): Likewise.
* sysdeps/i386/fpu/e_powf_log2_data.c: New file.
* sysdeps/ia64/fpu/e_powf_log2_data.c: New file.
* sysdeps/m68k/m680x0/fpu/e_powf_log2_data.c: New file.
Similar to the new logf: double precision arithmetics and a small
lookup table is used. The argument reduction step is the same as in
the new logf.
without wrapper on aarch64:
log2f reciprocal-throughput: 2.3x faster
log2f latency: 2.1x faster
old worst case error: 1.72 ulp
new worst case error: 0.75 ulp
aarch64 .text size: -252 bytes
aarch64 .rodata size: +244 bytes
* math/Makefile (type-float-routines): Add e_log2f_data.
* sysdeps/ieee754/flt-32/e_log2f.c: New implementation.
* sysdeps/ieee754/flt-32/e_log2f_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h (__log2f_data): Define.
(LOG2F_TABLE_BITS, LOG2F_POLY_ORDER): Define.
* sysdeps/i386/fpu/e_log2f_data.c: New file.
* sysdeps/ia64/fpu/e_log2f_data.c: New file.
* sysdeps/m68k/m680x0/fpu/e_log2f_data.c: New file.
without wrapper on aarch64:
logf reciprocal-throughput: 2.2x faster
logf latency: 1.9x faster
old worst case error: 0.89 ulp
new worst case error: 0.82 ulp
aarch64 .text size: -356 bytes
aarch64 .rodata size: +240 bytes
Uses double precision arithmetics and a lookup table to allow smaller
polynomial and avoid the use of division.
Data is in a separate translation unit with fixed layout to prevent the
compiler generating suboptimal literal access.
Errors are handled inline according to POSIX rules, but this patch
keeps the wrapper with SVID compatible error handling.
Needs libm-test-ulps adjustment for clogf in non-nearest rounding mode.
* math/Makefile (type-float-routines): Add e_logf_data.
* sysdeps/ieee754/flt-32/e_logf.c: New implementation.
* sysdeps/ieee754/flt-32/e_logf_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h (__logf_data): Define.
(LOGF_TABLE_BITS, LOGF_POLY_ORDER): Define.
* sysdeps/i386/fpu/e_logf_data.c: New file.
* sysdeps/ia64/fpu/e_logf_data.c: New file.
* sysdeps/m68k/m680x0/fpu/e_logf_data.c: New file.
Based on new expf and exp2f code from
https://github.com/ARM-software/optimized-routines/
with wrapper on aarch64:
expf reciprocal-throughput: 2.3x faster
expf latency: 1.7x faster
without wrapper on aarch64:
expf reciprocal-throughput: 3.3x faster
expf latency: 1.7x faster
without wrapper on aarch64:
exp2f reciprocal-throughput: 2.8x faster
exp2f latency: 1.3x faster
libm.so size on aarch64:
.text size: -152 bytes
.rodata size: -1740 bytes
expf/exp2f worst case nearest rounding error: 0.502 ulp
worst case non-nearest rounding error: 1 ulp
Error checks are inline and errno setting is in separate tail called
functions, but the wrappers are kept in this patch to handle the
_LIB_VERSION==_SVID_ case. (So e.g. errno is set twice for expf calls
and once for __expf_finite calls on targets where the new code is used.)
Double precision arithmetics is used which is expected to be faster on
most targets (including soft-float) than using single precision and it
is easier to get good precision result with it.
Const data is kept in a separate translation unit which complicates
maintenance a bit, but is expected to give good code for literal loads
on most targets and allows sharing data across expf, exp2f and powf.
(This data is disabled on i386, m68k and ia64 which have their own
expf, exp2f and powf code.)
Some details may need target specific tweaks:
- best convert and round to int operation in the arg reduction may be
different across targets.
- code was optimized on fma target, optimal polynomial eval may be
different without fma.
- gcc does not always generate good code for fp bit representation
access via unions or it may be inherently slow on some targets.
The libm-test-ulps will need adjustment because..
- The argument reduction ideally uses nearest rounded rint, but that is
not efficient on most targets, so the polynomial can get evaluated on a
wider interval in non-nearest rounding mode making 1 ulp errors common
in that case.
- The polynomial is evaluated such that it may have 1 ulp error on
negative tiny inputs with upward rounding.
* math/Makefile (type-float-routines): Add math_errf and e_exp2f_data.
* sysdeps/aarch64/fpu/math_private.h (TOINT_INTRINSICS): Define.
(roundtoint, converttoint): Likewise.
* sysdeps/ieee754/flt-32/e_expf.c: New implementation.
* sysdeps/ieee754/flt-32/e_exp2f.c: New implementation.
* sysdeps/ieee754/flt-32/e_exp2f_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h: New file.
* sysdeps/ieee754/flt-32/math_errf.c: New file.
* sysdeps/ieee754/flt-32/t_exp2f.h: Remove.
* sysdeps/i386/fpu/e_exp2f_data.c: New file.
* sysdeps/i386/fpu/math_errf.c: New file.
* sysdeps/ia64/fpu/e_exp2f_data.c: New file.
* sysdeps/ia64/fpu/math_errf.c: New file.
* sysdeps/m68k/m680x0/fpu/e_exp2f_data.c: New file.
* sysdeps/m68k/m680x0/fpu/math_errf.c: New file.
This patch adds SSE4.1 versions of trunc and truncf, using the roundsd
/ roundss instructions, similar to the versions of ceil, floor, rint
and nearbyint functions we already have. In my testing with the glibc
benchtests these are about 30% faster than the C versions for double,
20% faster for float.
Tested for x86_64.
[BZ #20142]
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_trunc-c, s_truncf-c, s_trunc-sse4_1 and s_truncf-sse4_1.
* sysdeps/x86_64/fpu/multiarch/s_trunc-c.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_trunc-sse4_1.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_trunc.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_truncf-c.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_truncf-sse4_1.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_truncf.c: Likewise.
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking). The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.
Tested for x86_64, and with build-many-glibcs.py.
* manual/math.texi (pow10): Do not document.
(pow10f): Likewise.
(pow10l): Likewise.
* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
* math/libm-test-exp10.inc (pow10_test): Remove.
(do_test): Do not call pow10.
* math/w_exp10_compat.c (pow10): Make into compat symbol.
[NO_LONG_DOUBLE] (pow10l): Likewise.
* math/w_exp10f_compat.c (pow10f): Likewise.
* math/w_exp10l_compat.c (pow10l): Likewise.
* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
(pow10): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
(pow10f): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
(pow10l): Make into compat symbol.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
pow10.
(CFLAGS-nldbl-pow10.c): Remove variable..
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
Undefine and redefine.
(pow10l): Make into compat symbol.
* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/nios2/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch completes the ucontext.h namespace fixes by fixing issues
related to the use of struct sigcontext as mcontext_t, and inclusion
of <bits/sigcontext.h> even when struct sigcontext is not so used.
Inclusion of <bits/sigcontext.h> by <sys/ucontext.h> is removed; the
way to get the sigcontext structure is by including <signal.h> (in a
context where __USE_MISC is defined); the sysdeps/generic version of
sys/ucontext.h keeps the inclusion by necessity, with a comment about
how this is not namespace-clean, but the only configuration that used
it, MicroBlaze, gets its own version of the header in this patch.
Where mcontext_t was typedefed to struct sigcontext, the contents of
struct sigcontext are inserted (with appropriate namespace handling to
prefix fields with __ when __USE_MISC is not defined); review should
check that this has been done correctly in each case, whether the
definition of struct sigcontext comes from glibc headers or from the
Linux kernel. This changes C++ name mangling on affected
architectures (which do not include x86_64/x86).
Tested for x86_64, and with build-many-glibcs.py.
2017-08-14 Joseph Myers <joseph@codesourcery.com>
[BZ #21457]
* sysdeps/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>.
* sysdeps/generic/sys/ucontext.h: Add comment about use of struct
sigcontext and namespace requirements.
* sysdeps/i386/sys/ucontext.h: Do not include <bits/sigcontext.h>.
* sysdeps/m68k/sys/ucontext.h: Likewise.
* sysdeps/mips/sys/ucontext.h: Likewise. Include <bits/types.h>.
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/aarch64/ucontext_i.sym (oEXTENSION): Use
__glibc_reserved1 instead of __reserved.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/alpha/ucontext-offsets.sym: Use
mcontext_t instead of struct sigcontext.
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/ia64/makecontext.c (__makecontext): Use
mcontext_t instead of struct sigcontext.
* sysdeps/unix/sysv/linux/ia64/sigcontext-offsets.sym: Use
mcontext_t instead of struct sigcontext.
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): New macro.
(struct __ia64_fpreg_mcontext): New type.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
(_SC_GR0_OFFSET): Use mcontext_t instead of struct sigcontext.
(uc_sigmask): Define using __ctx.
(uc_stack): Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/microblaze/sys/ucontext.h: New file.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include
<bits/sigcontext.h>. Include <bits/types.h>.
* conform/Makefile (test-xfail-XPG42/signal.h/conform): Remove.
(test-xfail-XPG42/sys/wait.h/conform): Likewise.
(test-xfail-XPG42/ucontext.h/conform): Likewise.
(test-xfail-UNIX98/signal.h/conform): Likewise.
(test-xfail-UNIX98/sys/wait.h/conform): Likewise.
(test-xfail-UNIX98/ucontext.h/conform): Likewise.
(test-xfail-XOPEN2K/signal.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K/ucontext.h/conform): Likewise.
(test-xfail-POSIX2008/signal.h/conform): Likewise.
(test-xfail-POSIX2008/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K8/signal.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise.
This patch obsoletes support for SVID libm error handling (the system
where a user-defined function matherr is called on a libm function
error; only enabled if you also set _LIB_VERSION = _SVID_ or
_LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global
variable to control libm error handling. matherr and _LIB_VERSION are
made into compat symbols, not supported for new ports or for static
linking. The libieee.a object file (which sets _LIB_VERSION = _IEEE_,
so disabling errno setting for some functions) is also removed, and
all the related definitions are removed from math.h.
The manual already recommends against using matherr, and it's already
not supported for _Float128 functions (those use new wrappers that
don't support matherr, only errno) - this patch means that it becomes
possible to e.g. add sinf32 as an alias to sinf without that resulting
in undesired matherr support in sinf32 for existing glibc ports.
matherr support is not part of any standard supported by glibc (it was
removed in XPG4).
Because matherr is a function to be defined by the user, of course
user programs defining such a function will still continue to link; it
just quietly won't be used. If they try to write to the library's
copy of _LIB_VERSION to enable SVID error handling, however, they will
get a link error (but if they define their own _LIB_VERSION variable,
they won't).
I expect the most likely case of build failures from this patch to be
programs with unconditional cargo-culted uses of -lieee (based on a
notion of "I want IEEE floating point", not any actual requirement for
that library).
Ideally, the new-port-or-static-linking case would use the new
wrappers used for _Float128. This is not implemented in this patch,
because of the complication of architecture-specific (powerpc32 and
sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard
directly. Thus, the old wrappers and __kernel_standard are still
built unconditionally, and _LIB_VERSION still exists in static libm.
But when the old wrappers and __kernel_standard are built in the
non-compat case, _LIB_VERSION and matherr are defined as macros so
code to support those features isn't actually built into static libm
or new ports' shared libm after this patch.
I intend to move to the new wrappers for static libm and new ports in
followup patches. I believe the sqrt wrappers for powerpc32 and sparc
can reasonably be removed. GCC already optimizes the normal case of
sqrt by generating code that uses a hardware instruction and only
calls the sqrt function if the argument was negative (if
-fno-math-errno, of course, it just uses the hardware instruction
without any check for negative argument being needed). Thus those
wrappers will only actually get called in the case of negative
arguments, which is not a case it makes sense to optimize for. But
even without removing the powerpc32 and sparc wrappers it should still
be possible to move to the new wrappers for static libm and new ports,
just without having those dubious architecture-specific optimizations
in static libm.
Everything said about matherr equally applies to matherrf and matherrl
(IA64-specific, undocumented), except that the structure of IA64 libm
means it won't be converted to using the new wrappers (it doesn't use
the old ones either, but its own error-handling code instead).
As with other tests of compat symbols, I expect test-matherr and
test-matherr-2 to need to become appropriately conditional once we
have a system for disabling such tests for ports too new to have the
relevant symbols.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove.
[__USE_MISC] (_LIB_VERSION): Likewise.
[__USE_MISC] (struct exception): Likewise.
[__USE_MISC] (matherr): Likewise.
[__USE_MISC] (DOMAIN): Likewise.
[__USE_MISC] (SING): Likewise.
[__USE_MISC] (OVERFLOW): Likewise.
[__USE_MISC] (UNDERFLOW): Likewise.
[__USE_MISC] (TLOSS): Likewise.
[__USE_MISC] (PLOSS): Likewise.
[__USE_MISC] (HUGE): Likewise.
[__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC].
* math/math-svid-compat.h: New file.
* conform/linknamespace.pl (@whitelist): Remove matherr, matherrf
and matherrl.
* include/math.h [!_ISOMAC] (__matherr): Remove.
* manual/arith.texi (FP Exceptions): Do not document matherr.
* math/Makefile (tests): Change test-matherr to test-matherr-3.
(tests-internal): New variable.
(install-lib): Do not add libieee.a.
(non-lib.a): Likewise.
(extra-objs): Do not add libieee.a and ieee-math.o.
(CPPFLAGS-s_lib_version.c): Remove variable.
($(objpfx)libieee.a): Remove rule.
($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm).
* math/ieee-math.c: Remove.
* math/libm-test-support.c (matherr): Remove.
* math/test-matherr.c: Use <support/test-driver.c>. Add copyright
and license notices. Include <math-svid-compat.h> and
<shlib-compat.h>.
(matherr): Undefine as macro. Use compat_symbol_reference.
(_LIB_VERSION): Likewise.
* math/test-matherr-2.c: New file.
* math/test-matherr-3.c: Likewise.
* sysdeps/generic/math_private.h (__kernel_standard): Remove
declaration.
(__kernel_standard_f): Likewise.
(__kernel_standard_l): Likewise.
* sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or
<math_private.h>. Include <math-svid-compat.h>.
(_LIB_VERSION): Undefine as macro.
(_LIB_VERSION_INTERNAL): Always initialize to _POSIX_. Define
only if [LIBM_SVID_COMPAT || !defined SHARED]. If
[LIBM_SVID_COMPAT], use compat_symbol.
* sysdeps/ieee754/s_matherr.c: Do not include <math.h> or
<math_private.h>. Include <math-svid-compat.h>.
(matherr): Undefine as macro.
(__matherr): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>.
[_LIBC && LIBM_SVID_COMPAT] (matherrf): Use
compat_symbol_reference.
[_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise.
[_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro.
[_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise.
* sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>.
(MATHERR_D): Remove declaration.
[!_LIBC] (_LIB_VERSION_TYPE): Likewise
[!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise.
[LIBM_BUILD] (pmatherrf): Likewise.
[LIBM_BUILD] (pmatherr): Likewise.
[LIBM_BUILD] (pmatherrl): Likewise.
(DOMAIN): Likewise.
(SING): Likewise.
(OVERFLOW): Likewise.
(UNDERFLOW): Likewise.
(TLOSS): Likewise.
(PLOSS): Likewise.
* sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>.
(__matherrf): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>.
(__matherrl): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* math/lgamma-compat.h: Include <math-svid-compat.h>.
* math/w_acos_compat.c: Likewise.
* math/w_acosf_compat.c: Likewise.
* math/w_acosh_compat.c: Likewise.
* math/w_acoshf_compat.c: Likewise.
* math/w_acoshl_compat.c: Likewise.
* math/w_acosl_compat.c: Likewise.
* math/w_asin_compat.c: Likewise.
* math/w_asinf_compat.c: Likewise.
* math/w_asinl_compat.c: Likewise.
* math/w_atan2_compat.c: Likewise.
* math/w_atan2f_compat.c: Likewise.
* math/w_atan2l_compat.c: Likewise.
* math/w_atanh_compat.c: Likewise.
* math/w_atanhf_compat.c: Likewise.
* math/w_atanhl_compat.c: Likewise.
* math/w_cosh_compat.c: Likewise.
* math/w_coshf_compat.c: Likewise.
* math/w_coshl_compat.c: Likewise.
* math/w_exp10_compat.c: Likewise.
* math/w_exp10f_compat.c: Likewise.
* math/w_exp10l_compat.c: Likewise.
* math/w_exp2_compat.c: Likewise.
* math/w_exp2f_compat.c: Likewise.
* math/w_exp2l_compat.c: Likewise.
* math/w_fmod_compat.c: Likewise.
* math/w_fmodf_compat.c: Likewise.
* math/w_fmodl_compat.c: Likewise.
* math/w_hypot_compat.c: Likewise.
* math/w_hypotf_compat.c: Likewise.
* math/w_hypotl_compat.c: Likewise.
* math/w_j0_compat.c: Likewise.
* math/w_j0f_compat.c: Likewise.
* math/w_j0l_compat.c: Likewise.
* math/w_j1_compat.c: Likewise.
* math/w_j1f_compat.c: Likewise.
* math/w_j1l_compat.c: Likewise.
* math/w_jn_compat.c: Likewise.
* math/w_jnf_compat.c: Likewise.
* math/w_jnl_compat.c: Likewise.
* math/w_lgamma_main.c: Likewise.
* math/w_lgamma_r_compat.c: Likewise.
* math/w_lgammaf_main.c: Likewise.
* math/w_lgammaf_r_compat.c: Likewise.
* math/w_lgammal_main.c: Likewise.
* math/w_lgammal_r_compat.c: Likewise.
* math/w_log10_compat.c: Likewise.
* math/w_log10f_compat.c: Likewise.
* math/w_log10l_compat.c: Likewise.
* math/w_log2_compat.c: Likewise.
* math/w_log2f_compat.c: Likewise.
* math/w_log2l_compat.c: Likewise.
* math/w_log_compat.c: Likewise.
* math/w_logf_compat.c: Likewise.
* math/w_logl_compat.c: Likewise.
* math/w_pow_compat.c: Likewise.
* math/w_powf_compat.c: Likewise.
* math/w_powl_compat.c: Likewise.
* math/w_remainder_compat.c: Likewise.
* math/w_remainderf_compat.c: Likewise.
* math/w_remainderl_compat.c: Likewise.
* math/w_scalb_compat.c: Likewise.
* math/w_scalbf_compat.c: Likewise.
* math/w_scalbl_compat.c: Likewise.
* math/w_sinh_compat.c: Likewise.
* math/w_sinhf_compat.c: Likewise.
* math/w_sinhl_compat.c: Likewise.
* math/w_sqrt_compat.c: Likewise.
* math/w_sqrtf_compat.c: Likewise.
* math/w_sqrtl_compat.c: Likewise.
* math/w_tgamma_compat.c: Likewise.
* math/w_tgammaf_compat.c: Likewise.
* math/w_tgammal_compat.c: Likewise.
* sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise.
* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
* sysdeps/ieee754/k_standard.c: Likewise.
* sysdeps/ieee754/k_standardf.c: Likewise.
* sysdeps/ieee754/k_standardl.c: Likewise.
* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
Remove enum __ptrace_flags along with the only constant it contains,
PTRACE_SEIZE_DEVEL, from Linux's sys/ptrace.h files.
This temporary development constant shouldn't have been added to
sys/ptrace.h in the first place. It was introduced in Linux by commit
v3.1-rc1~308^2~28 as a temporary part of new experimental PTRACE_SEIZE
interface. Later, as PTRACE_SEIZE stabilized and lost its experimental
status, this flag was removed from Linux by commit v3.4-rc1~109^2~20.
* sysdeps/unix/sysv/linux/sys/ptrace.h (enum __ptrace_flags,
PTRACE_SEIZE_DEVEL): Remove.
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h: Likewise.
This commit enhances the stub resolver to reload the configuration
in the per-thread _res object if the /etc/resolv.conf file has
changed. The resolver checks whether the application has modified
_res and will not overwrite the _res object in that case.
The struct resolv_context mechanism is used to check the
configuration file only once per name lookup.
This change uses the extended resolver state in struct resolv_conf to
store the search list. If applications have not patched the _res
object directly, this extended search list will be used by the stub
resolver during name resolution.
This patch adds tgmath.h support for _Float128, so eliminating the
awkward caveat in NEWS about the type not being supported there. This
does inevitably increase the size of macro expansions (which grows
particularly fast when you have nested calls to tgmath.h macros), but
only when _Float128 is supported and the declarations of _Float128
interfaces are visible; otherwise the expansions are unchanged.
Tested for x86_64 and arm.
* math/tgmath.h: Include <bits/libc-header-start.h> and
<bits/floatn.h>.
(__TGMATH_F128): New macro.
(__TGMATH_CF128): Likewise.
(__TGMATH_UNARY_REAL_ONLY): Use __TGMATH_F128.
(__TGMATH_UNARY_REAL_RET_ONLY): Likewise.
(__TGMATH_BINARY_FIRST_REAL_ONLY): Likewise.
(__TGMATH_BINARY_FIRST_REAL_STD_ONLY): New macro.
(__TGMATH_BINARY_REAL_ONLY): Use __TGMATH_F128.
(__TGMATH_BINARY_REAL_STD_ONLY): New macro.
(__TGMATH_BINARY_REAL_RET_ONLY): Use __TGMATH_F128.
(__TGMATH_TERNARY_FIRST_SECOND_REAL_ONLY): Likewise.
(__TGMATH_TERNARY_REAL_ONLY): Likewise.
(__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): Likewise.
(__TGMATH_UNARY_REAL_IMAG): Use __TGMATH_CF128.
(__TGMATH_UNARY_IMAG): Use __TGMATH_F128.
(__TGMATH_UNARY_REAL_IMAG_RET_REAL): Use __TGMATH_CF128.
(__TGMATH_BINARY_REAL_IMAG): Likewise.
(nexttoward): Use __TGMATH_BINARY_FIRST_REAL_STD_ONLY.
[__USE_MISC] (scalb): Use __TGMATH_BINARY_REAL_STD_ONLY.
* math/gen-tgmath-tests.py (Type.init_types): Enable _FloatN and
_FloatNx types if the corresponding HUGE_VAL macros are defined.
This patch implements a requirement of binutils >= 2.25 (up from 2.22)
to build glibc. Tests for 2.24 or later on x86_64 and s390 are
removed. It was already the case, as indicated by buildbot results,
that 2.24 was too old for building tests for 32-bit x86 (produced
internal linker errors linking elf/tst-gnu2-tls1mod.so). I don't know
if any configure tests for binutils features are obsolete given the
increased version requirement.
Tested for x86_64.
* configure.ac (AS): Require binutils 2.25 or later.
(LD): Likewise.
* configure: Regenerated.
* sysdeps/s390/configure.ac (AS): Remove version check.
* sysdeps/s390/configure: Regenerated.
* sysdeps/x86_64/configure.ac (AS): Remove version check.
* sysdeps/x86_64/configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for binutils 2.25 or later.
* INSTALL: Regenerated.
This patch fixes various miscellaneous namespace issues in
sys/ucontext.h headers.
Some struct tags are removed where the structs also have *_t typedef
names, while other struct tags without such names are renamed to start
__; the changes are noted in NEWS as they can affect C++ name mangling
(although there seems to be little if any external use of these types,
at least based on checking codesearch.debian.net). For powerpc,
pointers to struct pt_regs (not defined in this header) are changed to
point to struct __ctx(pt_regs), so in the __USE_MISC case those struct
fields continue to point to the existing struct pt_regs type for
maximum compatibility, while when that's a namespace issue they point
to a struct __pt_regs type which is always an incomplete struct.
Tested for affected architectures with build-many-glibcs.py.
[BZ #21457]
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (fpregset_t): Remove
struct tag.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h (fpregset_t):
Likewise.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (mcontext_t):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (pt_regs):
Declare struct type with __ctx.
[__WORDSIZE != 32] (mcontext_t): Use __ctx with pt_regs struct
tag.
(ucontext_t) [__WORDSIZE == 32]: Use __ctx with pt_regs struct tag
and regs field name.
This patch enables float128 support for ia64, so that all the
configurations where GCC supports _Float128 / __float128 as an
ABI-distinct type now have glibc support as well. bits/floatn.h
declares the support to be available for GCC 4.4 and later, which is
when the libgcc support was added. The removal of
sysdeps/ia64/fpu/k_rem_pio2.c is because the generic k_rem_pio2.c
defines a function required by the float128 code.
Tested (compilation only) with build-many-glibcs.py for ia64 (GCC 6
and GCC 7).
Given how long it is since libm-test-ulps has been updated for ia64, I
think truncating the file and regenerating it from scratch would be a
good idea when doing a regeneration to add float128 ulps. I expect
various ia64 libm issues (at least some already filed in Bugzilla) to
result in test failures even after ulps regeneration, but hopefully
the float128 code will pass tests as it's the same as used on other
architectures.
* sysdeps/ia64/Implies: Add ieee754/float128.
* sysdeps/ia64/bits/floatn.h: New file.
* sysdeps/ia64/float128-abi.h: Likewise.
* manual/math.texi (Mathematics): Document support for _Float128
on ia64.
* sysdeps/ia64/Makefile [$(subdir) = math] (CPPFLAGS): Append to
Makefile variable.
* sysdeps/ia64/fpu/e_sqrtf128.c: New file.
* sysdeps/ia64/fpu/k_rem_pio2.c: Remove file.
* sysdeps/ia64/fpu/sfp-machine.h: New file. Based on libgcc.
* sysdeps/ia64/math-tests.h: New file.
* math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): Also define
based on TEST_COND_binary128 for [__ia64__].
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise,
The ucontext_t type has a tag struct ucontext. As with previous such
issues for siginfo_t and stack_t, this tag is not permitted by POSIX
(is not in a reserved namespace), and so namespace conformance means
breaking C++ name mangling for this type.
In this case, the type does need to have some tag rather than just a
typedef name, because it includes a pointer to itself. This patch
uses struct ucontext_t as the new tag, so the type is mangled as
ucontext_t (the POSIX *_t reservation applies in all namespaces, not
just the namespace of ordinary identifiers). Another reserved name
such as struct __ucontext could of course be used.
Because of other namespace issues, this patch does not by itself fix
bug 21457 or allow any XFAILs to be removed.
Tested for x86_64, and with build-many-glibcs.py.
[BZ #21457]
* sysdeps/arm/sys/ucontext.h (struct ucontext): Rename to struct
ucontext_t.
* sysdeps/generic/sys/ucontext.h (struct ucontext): Likewise.
* sysdeps/i386/sys/ucontext.h (struct ucontext): Likewise.
* sysdeps/m68k/sys/ucontext.h (struct ucontext): Likewise.
* sysdeps/mips/sys/ucontext.h (struct ucontext): Likewise.
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (struct
ucontext): Likewise.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (struct
ucontext): Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/powerpc/powerpc32/backtrace.c (struct
rt_signal_frame_32): Likewise.
* sysdeps/powerpc/powerpc64/backtrace.c (struct signal_frame_64):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/kernel_rt_sigframe.h (struct
kernel_rt_sigframe): Likewise.
* sysdeps/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT):
Likewise.
* sysdeps/unix/sysv/linux/arm/register-dump.h (register_dump):
Likewise.
* sysdeps/unix/sysv/linux/arm/sigcontextinfo.h (SIGCONTEXT):
Likewise.
* sysdeps/unix/sysv/linux/hppa/profil-counter.h
(__profil_counter): Likewise.
* sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h
(SIGCONTEXT): Likewise.
* sysdeps/unix/sysv/linux/mips/kernel_rt_sigframe.h (struct
kernel_rt_sigframe): Likewise.
* sysdeps/unix/sysv/linux/nios2/kernel_rt_sigframe.h (struct
kernel_rt_sigframe): Likewise.
* sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h (SIGCONTEXT):
Likewise.
* sysdeps/unix/sysv/linux/sh/makecontext.S (__makecontext):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/makecontext.c
(__start_context): Likewise.
* sysdeps/unix/sysv/linux/tile/sigcontextinfo.h (SIGCONTEXT):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/register-dump.h (register_dump):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h (SIGCONTEXT):
Likewise.
This patch enables float128 support for x86_64 and x86. All GCC
versions that can build glibc provide the required support, but since
GCC 6 and before don't provide __builtin_nanq / __builtin_nansq, sNaN
tests and some tests of NaN payloads need to be disabled with such
compilers (this does not affect the generated glibc binaries at all,
just the tests). bits/floatn.h declares float128 support to be
available for GCC versions that provide the required libgcc support
(4.3 for x86_64, 4.4 for i386 GNU/Linux, 4.5 for i386 GNU/Hurd);
compilation-only support was present some time before then, but not
really useful without the libgcc functions.
fenv_private.h needed updating to avoid trying to put _Float128 values
in registers. I make no assertion of optimality of the
math_opt_barrier / math_force_eval definitions for this case; they are
simply intended to be sufficient to work correctly.
Tested for x86_64 and x86, with GCC 7 and GCC 6. (Testing for x32 was
compilation tests only with build-many-glibcs.py to verify the ABI
baseline updates. I have not done any testing for Hurd, although the
float128 support is enabled there as for GNU/Linux.)
* sysdeps/i386/Implies: Add ieee754/float128.
* sysdeps/x86_64/Implies: Likewise.
* sysdeps/x86/bits/floatn.h: New file.
* sysdeps/x86/float128-abi.h: Likewise.
* manual/math.texi (Mathematics): Document support for _Float128
on x86_64 and x86.
* sysdeps/i386/fpu/fenv_private.h: Include <bits/floatn.h>.
(math_opt_barrier): Do not put _Float128 values in floating-point
registers.
(math_force_eval): Likewise.
[__x86_64__] (SET_RESTORE_ROUNDF128): New macro.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (CPPFLAGS): Append
to Makefile variable.
* sysdeps/x86/fpu/e_sqrtf128.c: New file.
* sysdeps/x86/fpu/sfp-machine.h: Likewise. Based on libgcc.
* sysdeps/x86/math-tests.h: New file.
* math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): New macro.
* math/libm-test-getpayload.inc (getpayload_test_data): Use
XFAIL_FLOAT128_PAYLOAD.
* math/libm-test-setpayload.inc (setpayload_test_data): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data):
Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch adds ULPs for the float128 type, updates the abilist for libc
and libm, and adds the files bits/floatn.h and float128-abi.h, in order to
enable the new type for powerpc64le.
This patch also adds the implementation of sqrtf128 for powerpc64le, since
it is not implemented in libgcc. The sfp-machine.h header is taken from
libgcc.
Tested for powerpc64le (GCC 6.2 and GCC 7.1), powerpc64 and s390x.
* manual/math.texi (Mathematics): Mention the enabling of float128
for powerpc64le.
* sysdeps/powerpc/bits/floatn.h: New file.
* sysdeps/powerpc/fpu/libm-test-ulps: Regenerated.
* sysdeps/powerpc/fpu/math_private.h:
(__ieee754_sqrtf128): New inline override.
* sysdeps/powerpc/powerpc64le/Implies-before: New file.
* sysdeps/powerpc/powerpc64le/Makefile: New file.
* sysdeps/powerpc/powerpc64le/fpu/e_sqrtf128.c: New file.
* sysdeps/powerpc/powerpc64le/fpu/sfp-machine.h: New file.
* sysdeps/powerpc/powerpc64le/power9/fpu/e_sqrtf128.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Updated.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64le/float128-abi.h:
New file.
* Unicode 10.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 10.0.0, using
generator scripts contributed by Mike FABIAN (Red Hat).
Many of the things defined by bits/signum.h are invariant across all
supported operating systems. This patch factors out all of them to a
new header bits/signum-generic.h, which each bits/signum.h will include
and then override whichever things need adjustment. Normally that will
mean, at most, adding or changing a few signal numbers.
A user-visible side effect is that the obsolete signal constant SIGUNUSED
(which is an alias for SIGSYS on all platforms that define it) is no
longer exposed by any version of bits/signum.h.
A side effect only relevant to glibc hackers is that _NSIG is now defined
in terms of __SIGRTMAX, instead of the other way around. This is because
__SIGRTMAX varies from platform to platform, but _NSIG==__SIGRTMAX+1 is
true universally. If your platform doesn't support realtime signals,
leave __SIGRTMAX equal to __SIGRTMIN.
I also added a Linux-specific test to make sure that our signal constants
match the ones in <asm/signal.h>, since we can't use that header (it's
not even vaguely namespace-clean).
* bits/signum-generic.h: Renamed from bits/signum.h.
Add proper multiple include guard and misuse check.
Define __SIGRTMIN = __SIGRTMAX = 32, and define _NSIG = __SIGRTMAX+1.
Move definition of SIGIO to "archaic names for compatibility" section.
* bits/signum.h: New file which just includes bits/signum-generic.h.
* sysdeps/unix/bsd/bits/signum.h
* sysdeps/unix/sysv/linux/bits/signum.h
* sysdeps/unix/sysv/linux/alpha/bits/signum.h
* sysdeps/unix/sysv/linux/hppa/bits/signum.h
* sysdeps/unix/sysv/linux/mips/bits/signum.h
* sysdeps/unix/sysv/linux/sparc/bits/signum.h
Just include <bits/signum-generic.h> and then add or adjust
signal constants. Do not define SIGUNUSED, SIGRTMIN, or SIGRTMAX.
* signal/Makefile: Install bits/signum-generic.h.
* signal/signal.h: Define SIGRTMIN and SIGRTMAX here.
* sysdeps/generic/siglist.h: SIGSYS and SIGWINCH are
universal. Prefer SIGPOLL to SIGIO. Simplify #ifdeffage.
* sysdeps/unix/sysv/linux/tst-signal-numbers.sh: New test.
* sysdeps/unix/sysv/linux/Makefile: Run it.
xlocale.h is already a single-type micro-header, defining struct
__locale_struct and the typedefs __locale_t and locale_t. This patch
brings it into the bits/types/ scheme: there are now
bits/types/__locale_t.h which defines only __locale_struct and
__locale_t, and bits/types/locale_t.h which defines locale_t as well
as the other two. None of *our* headers need __locale_t.h, but it
appears to me that libstdc++ could make use of it.
There are a lot of external uses of xlocale.h, but all the uses I
checked had an autoconf test or equivalent for its existence. It has
never been available from other C libraries, and it has always
contained a comment reading "This file is not standardized, don't rely
on it, it can go away without warning" so I think dropping it is
pretty safe.
I also took the opportunity to clean up comments in various public
header files that still talk about the *_l interfaces as though they
were completely nonstandard. There are a few of them, notably the
strtoX_l and wcstoX_l families, that haven't been standardized, but
the bulk are in POSIX.1-2008.
* locale/xlocale.h: Rename to...
* locale/bits/types/__locale_t.h: ...here. Adjust commentary.
Only define struct __locale_struct and __locale_t, not locale_t.
* locale/bits/types/locale_t.h: New file; define locale_t here.
* locale/Makefile (headers): Update to match.
* include/xlocale.h: Delete wrapper.
* include/bits/types/__locale_t.h: New wrapper.
* include/bits/types/locale_t.h: New wrapper.
* ctype/ctype.h, include/printf.h, include/time.h
* locale/langinfo.h, locale/locale.h, stdlib/monetary.h
* stdlib/stdlib.h, string/string.h, string/strings.h, time/time.h
* wcsmbs/wchar.h, wctype/wctype.h: Use bits/types/locale_t.h.
Correct outdated comments regarding the standardization status of
the functions that take locale_t arguments.
* stdlib/strtod_l.c, stdlib/strtof_l.c, stdlib/strtol_l.c
* stdlib/strtold_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
* wcsmbs/wcstof_l.c, wcsmbs/wcstold.c, wcsmbs/wcstold_l.c:
Don't include xlocale.h. If necessary, include locale.h instead.
* stdlib/strtold_l.c: Unconditionally include wchar.h.
This patch makes configure require GCC 4.9 or later for building
glibc, and documents that requirement. Requiring GCC 4.9 or later
allows use of _Generic (as in tzcode). It would allow <stdatomic.h>
and _Atomic to be used as well if desired, although we need to avoid
any libatomic dependencies on any platforms. This patch is explicitly
the minimum to implement a new version requirement, with any
consequent cleanups of conditional code (not in installed headers or
files shared with gnulib etc.) to be done separately.
Tested for x86_64.
* configure.ac (libc_cv_compiler_ok): Require GCC 4.9 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for GCC 4.9 or later.
* INSTALL: Regenerated.
This patch removes PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS
and PTRACE_SETFPREGS as these requests does not exist on s390 kernel.
But the kernel has support for PTRACE_SINGLEBLOCK,
PTRACE_SECCOMP_GET_FILTER, PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA,
PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE and
PTRACE_TE_ABORT_RAND. Thus those are defined now.
The current kernel s390 specific ptrace.h file also defines
PTRACE_PEEKTEXT_AREA, PTRACE_PEEKDATA_AREA, PTRACE_POKETEXT_AREA,
PTRACE_POKEDATA_AREA, PTRACE_PEEK_SYSTEM_CALL, PTRACE_POKE_SYSTEM_CALL
and PTRACE_PROT, but those requests are not supported.
Thus those defines are skipped in glibc ptrace.h.
There were old includes of ptrace.h in sysdeps/s390/fpu/fesetenv.c.
The ptrace feature isn't used there anymore, thus I removed the includes.
Before this patch, <glibc>/sysdeps/unix/sysv/linux/s390/sys/ptrace.h
uses ptrace-request 12 for PTRACE_GETREGS,
but <kernel>/include/uapi/linux/ptrace.h uses 12 for PTRACE_SINGLEBLOCK.
The s390 kernel has never had support for PTRACE_GETREGS!
Thus glibc ptrace.h is adjusted to match kernel ptrace.h.
The new s390 specific test ensures, that PTRACE_SINGLEBLOCK defined
in glibc works as expected. If the kernel would interpret it as
PTRACE_GETREGS, then the testcase will not make any progress
and will time out.
ChangeLog:
[BZ #21539]
* NEWS: Mention s390 ptrace request changes.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h
(PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS,
PTRACE_SETFPREGS): Remove enum constant.
(PT_GETREGS, PT_SETREGS, PT_GETFPREGS, T_SETFPREGS):
Remove defines.
(PTRACE_SINGLEBLOCK): New enum constant.
(PT_STEPBLOCK): New define.
(PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA,
PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE,
PTRACE_TE_ABORT_RAND): New enum constant and define.
* sysdeps/s390/fpu/fesetenv.c: Remove ptrace.h includes.
* sysdeps/unix/sysv/linux/s390/tst-ptrace-singleblock.c:
New file.
* sysdeps/unix/sysv/linux/s390/Makefile: Add test.
All of the major architectures are adopting tunables as a way to add
tuning to the library, from hwcap_mask for aarch64 to HLE for s390 and
ifunc and cache geometry for x86. Given this adoption and the fact
that we don't want additional tuning knobs to be added outside of
tunables, it makes sense to enable tunables by default using this
trivial patch.
Smoke tested on x86 to ensure that tunables code was built without
specifying it as a configure flag. I have kept it as --enabled and
not changed it to --disable since we want to still keep the option of
different kinds of front-ends for tunables.
* configure.ac(--enable-tunables): Enable by default.
* configure: Regenerate.
* NEWS: Mention change.
* manual/install.texi (enable-tunables): Adjust documentation.
* INSTALL: Regenerate.
This is fairly complicated, not because the users of __need_Emath and
__need_error_t have complicated requirements, but because the core
changes had a lot of fallout.
__need_error_t exists for gnulib compatibility in argz.h and argp.h.
error_t itself is a Hurdism, an enum containing all the E-constants,
so you can do 'p (error_t) errno' in gdb and get a symbolic value.
argz.h and argp.h use it for function return values, and they want to
fall back to 'int' when that's not available. There is no reason why
these nonstandard headers cannot just go ahead and include all of
errno.h; so we do that.
__need_Emath is defined only by .S files; what they _really_ need is
for errno.h to avoid declaring anything other than the E-constants
(e.g. 'extern int __errno_location(void);' is a syntax error in
assembly language). This is replaced with a check for __ASSEMBLER__ in
errno.h, plus a carefully documented requirement for bits/errno.h not
to define anything other than macros. That in turn has the
consequence that bits/errno.h must not define errno - fortunately, all
live ports use the same definition of errno, so I've moved it to
errno.h. The Hurd bits/errno.h must also take care not to define
error_t when __ASSEMBLER__ is defined, which involves repeating all of
the definitions twice, but it's a generated file so that's okay.
* stdlib/errno.h: Remove __need_Emath and __need_error_t logic.
Reorganize file. Declare errno here. When __ASSEMBLER__ is
defined, don't declare anything other than the E-constants.
* include/errno.h: Change conditional for exposing internal
declarations to (not _ISOMAC and not __ASSEMBLER__).
* bits/errno.h: Remove logic for __need_Emath. Document
requirements for a port-specific bits/errno.h.
* sysdeps/unix/sysv/linux/bits/errno.h
* sysdeps/unix/sysv/linux/alpha/bits/errno.h
* sysdeps/unix/sysv/linux/hppa/bits/errno.h
* sysdeps/unix/sysv/linux/mips/bits/errno.h
* sysdeps/unix/sysv/linux/sparc/bits/errno.h:
Add multiple-include guard and check against improper inclusion.
Remove __need_Emath logic. Don't declare errno here. Ensure all
constants are defined as simple integer literals. Consistent
formatting.
* sysdeps/mach/hurd/errnos.awk: Likewise. Only define error_t and
enum __error_t_codes if __ASSEMBLER__ is not defined.
* sysdeps/mach/hurd/bits/errno.h: Regenerate.
* argp/argp.h, string/argz.h: Don't define __need_error_t before
including errno.h.
* sysdeps/i386/i686/fpu/multiarch/s_cosf-sse2.S
* sysdeps/i386/i686/fpu/multiarch/s_sincosf-sse2.S
* sysdeps/i386/i686/fpu/multiarch/s_sinf-sse2.S
* sysdeps/x86_64/fpu/s_cosf.S
* sysdeps/x86_64/fpu/s_sincosf.S
* sysdeps/x86_64/fpu/s_sinf.S:
Just include errno.h; don't define __need_Emath or include
bits/errno.h directly.
This patch optimizes the generic spinlock code.
The type pthread_spinlock_t is a typedef to volatile int on all archs.
Passing a volatile pointer to the atomic macros which are not mapped to the
C11 atomic builtins can lead to extra stores and loads to stack if such
a macro creates a temporary variable by using "__typeof (*(mem)) tmp;".
Thus, those macros which are used by spinlock code - atomic_exchange_acquire,
atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted.
According to the comment from Szabolcs Nagy, the type of a cast expression is
unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm):
__typeof ((__typeof (*(mem)) *(mem)) tmp;
Thus from spinlock perspective the variable tmp is of type int instead of
type volatile int. This patch adjusts those macros in include/atomic.h.
With this construct GCC >= 5 omits the extra stores and loads.
The atomic macros are replaced by the C11 like atomic macros and thus
the code is aligned to it. The pthread_spin_unlock implementation is now
using release memory order instead of sequentially consistent memory order.
The issue with passed volatile int pointers applies to the C11 like atomic
macros as well as the ones used before.
I've added a glibc_likely hint to the first atomic exchange in
pthread_spin_lock in order to return immediately to the caller if the lock is
free. Without the hint, there is an additional jump if the lock is free.
I've added the atomic_spin_nop macro within the loop of plain reads.
The plain reads are also realized by C11 like atomic_load_relaxed macro.
The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire
the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange
or a CAS. This is defined in atomic-machine.h for all architectures.
The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed.
There is no technical reason for throwing in a CAS every now and then,
and so far we have no evidence that it can improve performance.
If that would be the case, we have to adjust other spin-waiting loops
elsewhere, too! Using a CAS loop without plain reads is not a good idea
on many targets and wasn't used by one. Thus there is now no option to
do so.
Architectures are now using the generic spinlock automatically if they
do not provide an own implementation. Thus the pthread_spin_lock.c files
in sysdeps folder are deleted.
ChangeLog:
* NEWS: Mention new spinlock implementation.
* include/atomic.h:
(__atomic_val_bysize): Cast type to omit volatile qualifier.
(atomic_exchange_acq): Likewise.
(atomic_load_relaxed): Likewise.
(ATOMIC_EXCHANGE_USES_CAS): Check definition.
* nptl/pthread_spin_init.c (pthread_spin_init):
Use atomic_store_relaxed.
* nptl/pthread_spin_lock.c (pthread_spin_lock):
Use C11-like atomic macros.
* nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* nptl/pthread_spin_unlock.c (pthread_spin_unlock):
Use atomic_store_release.
* sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File.
* sysdeps/arm/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/mips/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define.
* sysdeps/alpha/atomic-machine.h: Likewise.
* sysdeps/arm/atomic-machine.h: Likewise.
* sysdeps/i386/atomic-machine.h: Likewise.
* sysdeps/ia64/atomic-machine.h: Likewise.
* sysdeps/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise.
* sysdeps/microblaze/atomic-machine.h: Likewise.
* sysdeps/mips/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise.
* sysdeps/s390/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc64/atomic-machine.h: Likewise.
* sysdeps/tile/tilegx/atomic-machine.h: Likewise.
* sysdeps/tile/tilepro/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise.
* sysdeps/x86_64/atomic-machine.h: Likewise.
glibc defines the stack_t type with the tag struct sigaltstack. This
is not permitted by POSIX; sigaltstack is only reserved with file
scope in the namespace of ordinary identifiers, not the tag namespace,
and in the case where stack_t is obtained from ucontext.h rather than
signal.h, it's not reserved with file scope at all.
This patch removes the tag accordingly and updates uses in glibc of
struct sigaltstack. This is similar to the removal of the "struct
siginfo" tag a few years ago: C++ name mangling changes are an
unavoidable consequence. A NEWS item is added to note the changed
mangling. There is inevitably some risk of breaking builds of
anything that relies on the struct sigaltstack name (though the first
few hits I looked at from codesearch.debian.net generally seemed to
involve code that could use the stack_t name conditionally, so
depending on how they determine the conditionals they may work with
glibc not defining the struct tag anyway).
Tested for x86_64 and x86, and with build-many-glibcs.py.
[BZ #21517]
* bits/types/stack_t.h (stack_t): Remove struct tag.
* sysdeps/unix/sysv/linux/bits/types/stack_t.h (stack_t):
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/types/stack_t.h (stack_t):
Likewise.
* debug/segfault.c (install_handler): Use stack_t instead of
struct sigaltstack.
* hurd/hurd/signal.h (struct hurd_sigstate): Likewise.
* hurd/trampoline.c (_hurd_setup_sighandler): Likewise.
* include/signal.h (__sigaltstack): Likwise.
* signal/sigaltstack.c (__sigaltstack): Likewise.
* signal/signal.h (sigaltstack): Likewise.
* sysdeps/mach/hurd/i386/signal-defines.sym
(SIGALTSTACK__SS_SP__OFFSET): Likewise.
(SIGALTSTACK__SS_SIZE__OFFSET): Likewise.
(SIGALTSTACK__SS_FLAGS__OFFSET): Likewise.
* sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise.
* sysdeps/mach/hurd/sigstack.c (sigstack): Likewise.
* sysdeps/unix/sysv/linux/alpha/sys/procfs.h (struct
elf_prstatus): Likewise.
* sysdeps/unix/sysv/linux/hppa/____longjmp_chk.c (CHECK_SP):
Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/procfs.h (struct elf_prstatus):
Likewise.
* sysdeps/unix/sysv/linux/m68k/____longjmp_chk.c (CHECK_SP):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/procfs.h (struct
elf_prstatus): Likewise.
* sysdeps/unix/sysv/linux/sh/sys/procfs.h (struct elf_prstatus):
Likewise.
* sysdeps/unix/sysv/linux/sys/procfs.h (struct elf_prstatus):
Likewise.
This patch adds support of preadv2 and pwritev2 which are similar to
preadv/pwritev but with an extra flag argument. As for preadv/pwritev
both interfaces are added a non-standard GNU API.
For default 'posix' implementation trying to emulate the Linux supported
flags is troublesome:
* We can not temporary change the file state of the O_DSYNC and O_SYNC
flags to emulate RWF_{D}SYNC (attempts to change the state of using
fcntl are silently ignored).
* IOCB_HIPRI requires the file opened in O_DIRECT and uses an internal
semantic not provided by any other flag (O_NONBLOCK for instance).
So default sysdeps/posix implementations fails with EOPNOTSUPP for any non
supported flag (which are none currently) calls generic preadv/pwritev.
Basically this implementation supports only preadv2 called as preadv (with
flags sets to 0).
The Linux one uses the preadv2/pwritev2 syscall if defined, otherwise it
call preadv/writev. Instead of using the previous __ASSUME_* to
unconditionally issue the syscall (and avoid building the fallback routine),
it call pread/write if the preadv2/pwritev2 syscalls fails. The idea
is just avoid adding another __ASSUME_* and checking each architecture
on every kernel bump and simplify code conditionals.
Checked on x86_64-linux-gnu and on i686-linux-gnu and a check with
run-built-tests=no on aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips{64,64n32}-linux-gnu,
nios2-linux-gnu, powerpc{64,64le}-linux-gnu, s390{x}-linux-gnu,
sparc{64,v9}-linux-gnu, tile{gx,pro}-linux-gnu, and sh4-linux-gnu (all using
gcc 6.3).
* NEWS: Add note about pwritev2 and preadv2 inclusion.
* misc/Makefile (routines): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
(tests): Add tst-preadvwritev2 and tst-preadvwritev64v2.
* misc/Versions (GLIBC_2.26): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
* misc/preadv2.c: New file.
* misc/preadv64v2.c: Likewise.
* misc/pwritev2.c: Likewise.
* misc/pwritev64v2.c: Likewise.
* misc/tst-preadvwritev2.c: Likewise.
* misc/tst-preadvwritev64v2.c: Likewise.
* manual/llio.texi: Add preadv2 and pwritev2 documentation.
* misc/sys/uio.h [__USE_GNU && !__USE_FILE_OFFSET64] (preadv2): New
prototype.
[__USE_GNU && !__USE_FILE_OFFSET64] (pwritev2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (preadv64v2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (pwritev64v2): Likewise.
* misc/tst-preadvwritev-common.c (PREADV): Define if not defined.
(PWRITEV): Likewise.
(do_test_with_offset): Use PREADV and PWRITEV macros and check for
ENOSYS.
* nptl/tst-cancel4.c (tf_pwritev2): New test.
(tf_preadv2): Likewise.
(tf_fsync): Add tf_pwritev2 and tf_preadv2.
* sysdeps/posix/preadv2.c: Likewise.
* sysdeps/posix/preadv64v2.c: Likewise.
* sysdeps/posix/pwritev2.c: Likewise.
* sysdeps/posix/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/kernel-features.h: Add comment for syscall
support in kernel.
* sysdeps/unix/sysv/linux/preadv2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv64v2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv.c (preadv): Add libc_hidden_def.
* sysdeps/unix/sysv/linux/preadv64.c (preadv64): Likewise.
* sysdeps/unix/sysv/linux/pwritev.c (pwritev): Likewise.
* sysdeps/unix/sysv/linux/pwritev64.c (pwritev64): Likewise.
* sysdeps/unix/sysv/linux/bits/uio.h: Add supported preadv2/pwritev2
support flags on Linux.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist (GLIBC_2.26): Add
preadv2, preadv64v2, pwritev2, pwritev64v2.
* sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist (GLIBC_2.26):
Likewise.
The NaCl port has not been actively maintained since before the 2.25
release. The complementary GCC back-end was never contributed to GCC,
and we are given to understand that the current NaCl SDK has switched
to Clang and therefore cannot be used to build glibc anymore, so we
doubt that the port remains useful.
This commit simply removes the sysdeps/arm/nacl and sysdeps/nacl
directories and the abi-tags entry.
Remove the NaCl port.
* abi-tags: Remove .*-.*-nacl.* entry.
* sysdeps/arm/nacl: Remove directory and contents.
* sysdeps/nacl: Likewise.
As per the recent discussion, this patch implements a requirement for
Linux 3.2 or later for x86 and x86_64. This is only the initial
change to increase the configured minimum; it's expected that followup
patches would deal with associated removal of conditionals that are no
longer needed. If we remove the start-up test on the kernel version,
of course the NEWS and README text should then be revised (to reflect
that this version is just one such that glibc does not intend to
include compatibility code for any older kernel version, rather than
older kernels necessarily failing to work or glibc necessarily having
compatibility code for newer interfaces).
The followups would be able to assume presence of getcpu (x86_64),
recvmmsg (not always through its own syscall, sometimes only through
socketcall), sendmmsg (likewise), /proc/$pid/task/$tid/comm, f_flags
from statfs, prlimit64.
Tested for x86_64 and x86.
* sysdeps/unix/sysv/linux/i386/configure.ac (arch_minimum_kernel):
Remove.
* sysdeps/unix/sysv/linux/i386/configure: Regenerated.
* sysdeps/unix/sysv/linux/x86_64/64/configure.ac
(arch_minimum_kernel): Remove.
* sysdeps/unix/sysv/linux/x86_64/64/configure: Regenerated.
* README: Update statement about Linux kernel requirements.
This patch adds support for the POSIX_SPAWN_SETSID flag.
It was recently accepted by the Austin Group:
http://austingroupbugs.net/view.php?id=1044
Checked on x86_64
Daurnimator <quae@daurnimator.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
[BZ #21340]
* posix/Makefile (tests): Add tst-posix_spawn-setsid to list of tests.
* posix/spawn.h: define POSIX_SPAWN_SETSID flag.
* posix/spawnattr_setflags.c (ALL_FLAGS): Add POSIX_SPAWN_SETSID to
valid flags.
* posix/tst-posix_spawn-setsid.c: Add test for POSIX_SPAWN_SETSID.
* sysdeps/mach/hurd/spawni.c (__spawni): Implementation of
POSIX_SPAWN_SETSID.
* sysdeps/posix/spawni.c (__spawni): Likewise.
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Likewise.
* NEWS: Add note about POSIX_SPAWN_SETSID support.
EDNS is disabled by default (so there is interoperability issue), and
the fallback code is problematic because it prevents an application
from obtaining DNSSEC data after a FORMERR response.
Fix the incorrect sorting order of a digraph and its geminated variant,
regression introduced by a faulty fix to bug 13547 in commit
b008d4c856.
Fix two inconsistencies in sorting unusual capitalization of digraphs
(bug #18587).
Enable DIACRIT_FORWARD to work around bug #17750.
Sort foreign accents after the Hungarian ones.
Add extensive unittests containing all the examples from The Rules of
Hungarian Orthography and many more, including explanatory comments.
librpcsvc.a should not be installed, too.
* sunrpc/Makefile: don't build and install rpcsvc header
files, rpcgen and librpcsvc.a by default.
Signed-off-by: Thorsten Kukuk <kukuk@suse.com>
* Unicode 9.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 9.0.0, using
generator scripts contributed by Mike FABIAN (Red Hat).
The ip6-bytestring resolver corresponds to the RES_USEBSTRING flag and
not RES_NOIP6DOTINT. Thank you Michael Kerrisk for noticing and
pointing it out.
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp,
ufromfpx, and float and long double variants) to convert from
floating-point to an integer type with any signedness and any given
width up to that of intmax_t, in any of the five IEEE rounding modes
(the usual four for binary floating point, plus rounding to nearest
with ties rounding away from zero), with control of whether in-range
non-integer values should result in the "inexact" exception being
raised. This patch implements these functions for glibc.
These implementations are (apart from raising exceptions) pure integer
implementations; it's entirely possible optimized versions could be
devised for some architectures. A common math/fromfp.h header
provides various common helper code that can readily be shared between
the implementations for different types. For each type, the bulk of
the implementation is also shared between the four functions, with
wrappers that define UNSIGNED and INEXACT macros appropriately before
including the main implementation.
As the functions return intmax_t and uintmax_t without math.h being
allowed to expose those typedef names, they are declared using
__intmax_t and __uintmax_t as obtained from <bits/types.h>.
The FP_INT_* rounding direction macros are defined as ascending
integers in the order the names are listed in the TS; I see no
significant value in allowing architectures to vary the values of
them.
The libm-test machinery is duly adapted to handle unsigned int
arguments, and intmax_t and uintmax_t results. Because each test
input is generally tested for four functions, five rounding modes and
several different widths, the libm-test.inc additions are very large.
Thus, the diffs in the body of this message exclude the libm-test.inc
changes, with the full patch being attached gzipped. The bulk of the
new tests were generated (expanded from a test input plus rounding
results and information about where it lies in the relevant interval
between integers, to libm-test tests for all relevant combinations of
function, rounding direction and width) by a script that's included in
the patch as math/gen-fromfp-tests.py (input data
math/gen-fromfp-tests-inputs); as an ad hoc script that's not really
expected to be rerun, it's not very polished, but it's at least
plausibly useful for adding any further tests for these functions in
future. I may split the libm-test tests up by function in future (so
both libm-test.inc and auto-libm-test-out are split into separate
files, and the tests for each function are also built and run
separately), but not for 2.25.
For no obvious reason, adding tgmath tests for the new functions
resulted in -Wuninitialized errors from test-tgmath.c about the
variable i being used uninitialized. Those errors were correct - the
variable is read by the frexp version in test-tgmath.c (where real
frexp would write through that pointer instead of reading it) - but I
don't know why this patch would result in the pre-existing issue being
newly detected. The patch initializes the variable to avoid those
errors.
With these changes, glibc 2.25 should have all the library features
from TS 18661-1 other than the functions that round result to narrower
type (and constant rounding directions, but I'm considering those
mainly a compiler feature not a library one).
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(fromfp): New declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
* math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
* math/math.h: Include <bits/types.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum
constant and macro.
(FP_INT_DOWNWARD): Likewise.
(FP_INT_TOWARDZERO): Likewise.
(FP_INT_TONEARESTFROMZERO): Likewise.
(FP_INT_TONEAREST): Likewise.
* math/Versions (fromfp): New libm symbol at version GLIBC_2.25.
(fromfpf): Likewise.
(fromfpl): Likewise.
(ufromfp): Likewise.
(ufromfpf): Likewise.
(ufromfpl): Likewise.
(fromfpx): Likewise.
(fromfpxf): Likewise.
(fromfpxl): Likewise.
(ufromfpx): Likewise.
(ufromfpxf): Likewise.
(ufromfpxl): Likewise.
* math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF,
s_fromfpxF and s_ufromfpxF.
* math/gen-fromfp-tests.py: New file.
* math/gen-fromfp-tests-inputs: Likewise.
* math/libm-test.inc: Include <stdint.h>
(check_intmax_t): New function.
(check_uintmax_t): Likewise.
(struct test_fiu_M_data): New type.
(struct test_fiu_U_data): Likewise.
(RUN_TEST_fiu_M): New macro.
(RUN_TEST_LOOP_fiu_M): Likewise.
(RUN_TEST_fiu_U): Likewise.
(RUN_TEST_LOOP_fiu_U): Likewise.
(fromfp_test_data): New array.
(fromfp_test): New function.
(fromfpx_test_data): New array.
(fromfpx_test): New function.
(ufromfp_test_data): New array.
(ufromfp_test): New function.
(ufromfpx_test_data): New array.
(ufromfpx_test): New function.
(main): Call fromfp_test, fromfpx_test, ufromfp_test and
ufromfpx_test.
* math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor
characters.
* math/test-tgmath-ret.c: Include <stdint.h>.
(rm): New variable.
(width): Likewise.
(CHECK_RET_CONST_TYPE): Take extra arguments and pass them to
called function.
(CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to
CHECK_RET_CONST_TYPE.
(CHECK_RET_CONST_DOUBLE): Likewise.
(CHECK_RET_CONST_LDOUBLE): Likewise.
(CHECK_RET_CONST): Take extra arguments and pass them to calls
macros.
(fromfp): New CHECK_RET_CONST call.
(ufromfp): Likewise.
(fromfpx): Likewise.
(ufromfpx): Likewise.
(do_test): Call check_return_fromfp, check_return_ufromfp,
check_return_fromfpx and check_return_ufromfpx.
* math/test-tgmath.c: Include <stdint.h>
(NCALLS): Increase to 138.
(F(compile_test)): Initialize i. Call fromfp functions.
(F(fromfp)): New function.
(F(fromfpx)): Likewise.
(F(ufromfp)): Likewise.
(F(ufromfpx)): Likewise.
* manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD,
FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO,
FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf,
ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and
ufromfpxl.
* manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx,
ufromfp and ufromfpx.
* math/fromfp.h: New file.
* sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise.
* sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise.
* sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise.
* sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise.
* sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp,
ufromfp, fromfpx and ufromfpx.
(CFLAGS-nldbl-fromfp.c): New variable.
(CFLAGS-nldbl-fromfpx.c): Likewise.
(CFLAGS-nldbl-ufromfp.c): Likewise.
(CFLAGS-nldbl-ufromfpx.c): Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>.
* sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
The NEWS entry for the feature test macro
__STDC_WANT_IEC_60559_BFP_EXT__ describes the state of support for
that TS as "most features from that TS are not supported by the GNU C
Library". This patch updates it to say "not all features from that TS
are supported by the GNU C Library".
(The functions not yet supported are the fromfp functions - I'm
working on them, but they may not be done before the freeze - and the
functions round result to narrower type - which definitely won't be
started for 2.25, since they require significant infrastructure work.
That's 30 functions, which is less than half the number of functions
in the TS, so saying "most" now seems inaccurate.)
TS 18661-1 defines roundeven functions that round a floating-point
number to the nearest integer, in that floating-point type, with ties
rounding to even (whereas the round functions round ties away from
zero). As with other such functions, they raise no exceptions apart
from "invalid" for signaling NaNs. There was a previous user request
for this functionality in glibc in
<https://sourceware.org/ml/libc-help/2015-02/msg00005.html>.
This patch implements these functions for glibc. The implementations
use integer bit-manipulation (or roundeven on the high and low parts,
in the IBM long double case). It's possible that there may be faster
approaches on some architectures (in particular, on AArch64 the frintn
instruction should do exactly what's required); I'll leave it to
architecture maintainers or others interested to implement such
architecture-specific versions if desired. (Where architectures have
instructions to round to nearest integer in the current rounding mode,
implementations saving and restoring the rounding mode - and dealing
with exceptions if those instructions generate "inexact" - are also
possible, though their performance depends on the cost of manipulating
exceptions / rounding mode state.)
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(roundeven): New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New
macro.
* math/Versions (roundeven): New libm symbol at version
GLIBC_2.25.
(roundevenf): Likewise.
(roundevenl): Likewise.
* math/Makefile (libm-calls): Add s_roundevenF.
* math/libm-test.inc (roundeven_test_data): New array.
(roundeven_test): New function.
(main): Call roundeven_test.
* math/test-tgmath.c (NCALLS): Increase to 134.
(F(compile_test)): Call roundeven.
(F(roundeven)): New function.
* manual/arith.texi (Rounding Functions): Document roundeven,
roundevenf and roundevenl.
* manual/libm-err-tab.pl (@all_functions): Add roundeven.
* include/math.h (roundeven): Use libm_hidden_proto.
* sysdeps/ieee754/dbl-64/s_roundeven.c: New file.
* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise.
* sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
roundeven.
(CFLAGS-nldbl-roundeven.c): New variable.
* sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
explicit_bzero(s, n) is the same as memset(s, 0, n), except that the
compiler is not allowed to delete a call to explicit_bzero even if the
memory pointed to by 's' is dead after the call. Right now, this effect
is achieved externally by having explicit_bzero be a function whose
semantics are unknown to the compiler, and internally, with a no-op
asm statement that clobbers memory. This does mean that small
explicit_bzero operations cannot be expanded inline as small memset
operations can, but on the other hand, small memset operations do get
deleted by the compiler. Hopefully full compiler support for
explicit_bzero will happen relatively soon.
There are two new tests: test-explicit_bzero.c verifies the
visible semantics in the same way as the existing test-bzero.c,
and tst-xbzero-opt.c verifies the not-being-optimized-out property.
The latter is conceptually based on a test written by Matthew Dempsky
for the OpenBSD regression suite.
The crypt() implementation has an immediate use for this new feature.
We avoid having to add a GLIBC_PRIVATE alias for explicit_bzero
by running all of libcrypt's calls through the fortified variant,
__explicit_bzero_chk, which is in the impl namespace anyway. Currently
I'm not aware of anything in libc proper that needs this, but the
glue is all in place if it does become necessary. The legacy DES
implementation wasn't bothering to clear its buffers, so I added that,
mostly for consistency's sake.
* string/explicit_bzero.c: New routine.
* string/test-explicit_bzero.c, string/tst-xbzero-opt.c: New tests.
* string/Makefile (routines, strop-tests, tests): Add them.
* string/test-memset.c: Add ifdeffage for testing explicit_bzero.
* string/string.h [__USE_MISC]: Declare explicit_bzero.
* debug/explicit_bzero_chk.c: New routine.
* debug/Makefile (routines): Add it.
* debug/tst-chk1.c: Test fortification of explicit_bzero.
* string/bits/string3.h: Fortify explicit_bzero.
* manual/string.texi: Document explicit_bzero.
* NEWS: Mention addition of explicit_bzero.
* crypt/crypt-entry.c (__crypt_r): Clear key-dependent intermediate
data before returning, using explicit_bzero.
* crypt/md5-crypt.c (__md5_crypt_r): Likewise.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* include/string.h: Redirect internal uses of explicit_bzero
to __explicit_bzero_chk[_internal].
* string/Versions [GLIBC_2.25]: Add explicit_bzero.
* debug/Versions [GLIBC_2.25]: Add __explicit_bzero_chk.
* sysdeps/arm/nacl/libc.abilist
* sysdeps/unix/sysv/linux/aarch64/libc.abilist
* sysdeps/unix/sysv/linux/alpha/libc.abilist
* sysdeps/unix/sysv/linux/arm/libc.abilist
* sysdeps/unix/sysv/linux/hppa/libc.abilist
* sysdeps/unix/sysv/linux/i386/libc.abilist
* sysdeps/unix/sysv/linux/ia64/libc.abilist
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist
* sysdeps/unix/sysv/linux/microblaze/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
* sysdeps/unix/sysv/linux/nios2/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist
* sysdeps/unix/sysv/linux/sh/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist:
Add entries for explicit_bzero and __explicit_bzero_chk.
TS 18661-1 defines a macro FE_SNANS_ALWAYS_SIGNAL in <fenv.h>, to
indicate that the recommended practice regarding sNaNs (that
operations always produce a qNaN output with "invalid" exception, even
in the fmax / fmin / hypot / pow cases where a qNaN input would not
result in qNaN output) is followed.
Now that those functions with C99 special cases for NaNs have been
fixed not to apply those special cases to sNaN, only to qNaN, glibc
follows that recommended practice. This patch makes it define the
corresponding macro.
Since compiler optimizations may affect whether sNaNs behave as
expected and the macro relates to both language and library features,
it is only defined if __SUPPORT_SNAN__ is defined (which GCC defines
for -fsignaling-nans). It is also not defined if FE_INVALID is
undefined, since the recommended practice specifically refers to
raising the "invalid" exception, so it seems inappropriate to define
the macro for soft-float cases without support for exceptions.
(Further refinement would be possible in cases where bits/fenv.h is
shared by configurations both with and without exceptions support.)
Tested for x86_64 and x86, and also did compile-only testing for nios2
to cover the no-exceptions case.
* math/fenv.h
[__GLIBC_USE (IEC_60559_BFP_EXT) && FE_INVALID && __SUPPORT_SNAN__]
(FE_SNANS_ALWAYS_SIGNAL): New macro.
* math/test-fe-snans-always-signal.c: New file.
* math/Makefile (tests): Add test-fe-snans-always-signal.
(CFLAGS-test-fe-snans-always-signal.c): New variable.
* manual/arith.texi (Infinity and NaN): Document
FE_SNANS_ALWAYS_SIGNAL.
For many years, the only effect of these macros has been to make
unistd.h declare getlogin_r. _POSIX_C_SOURCE >= 199506L also causes
this function to be declared. However, people who don't carefully
read all the headers might be confused into thinking they need to
define _REENTRANT for any threaded code (as was indeed the case a long
time ago).
Therefore, remove __USE_REENTRANT, and make _REENTRANT and _THREAD_SAFE
into synonyms for _POSIX_C_SOURCE=199506L. This will only affect
programs that don't select a higher conformance level some other way.
For instance, -std=c89 -D_REENTRANT will see a change in visible
declarations, but -std=c99 -D_POSIX_C_SOURCE=200809L -D_REENTRANT won't,
and -D_REENTRANT all by itself also won't, because _DEFAULT_SOURCE
implies _POSIX_C_SOURCE > 199506.
* include/features.h: Remove __USE_REENTRANT. Treat _REENTRANT
and _THREAD_SAFE the same as _POSIX_C_SOURCE=199506L, if a higher
POSIX conformance level has not been selected by other macros.
* NEWS, manual/creature.texi: Document this change.
* posix/unistd.h, posix/bits/unistd.h: Don't check __USE_REENTRANT.
* include/libc-symbols.h: Don't define _REENTRANT.
* scripts/check-installed-headers.sh: Don't undefine _REENTRANT.
This patch adds pretty printers for the following NPTL types:
- pthread_mutex_t
- pthread_mutexattr_t
- pthread_cond_t
- pthread_condattr_t
- pthread_rwlock_t
- pthread_rwlockattr_t
To load the pretty printers into your gdb session, do the following:
python
import sys
sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers')
end
source /path/to/glibc/source/pretty-printers/nptl-printers.py
You can check which printers are registered and enabled by issuing the
'info pretty-printer' gdb command. Printers should trigger automatically when
trying to print a variable of one of the types mentioned above.
The printers are architecture-independent, and were tested on an AMD64 running
Ubuntu 14.04 and an x86 VM running Fedora 24.
In order to work, the printers need to know the values of various flags that
are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since
replicating these constants in the printers file itself would create a
maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses
to extract the constants. This script is pretty much the same as gen-as-const.awk,
except it doesn't cast the constant values to 'long' and is thorougly documented.
The constants need only to be enumerated in a .pysym file, which is then referenced
by a Make variable called gen-py-const-headers.
As for the install directory, I discussed this with Mike Frysinger and Siddhesh
Poyarekar, and we agreed that it can be handled in a separate patch, and shouldn't
block merging of this one.
In addition, I've written a series of test cases for the pretty printers.
Each lock type (mutex, condvar and rwlock) has two test programs, one for itself
and other for its related 'attributes' object. Each test program in turn has a
PExpect-based Python script that drives gdb and compares its output to the
expected printer's. The tests run on the glibc host, which is assumed to have
both gdb and PExpect; if either is absent the tests will fail with code 77
(UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper.
I've tested the printers on both native builds and a cross build using a Beaglebone
Black running Debian, with the build system's filesystem shared with the board
through NFS.
Finally, I've written a README that explains all this and more.
* INSTALL: Regenerated.
* Makeconfig: Add comments and whitespace to make the control flow
clearer.
(+link-printers-tests, +link-pie-printers-tests, CFLAGS-printers-tests,
installed-rtld-LDFLAGS, built-rtld-LDFLAGS, link-libc-rpath,
link-libc-tests-after-rpath-link, link-libc-printers-tests): New.
(rtld-LDFLAGS, rtld-tests-LDFLAGS, link-libc-tests-rpath-link,
link-libc-tests): Use the new variables as required.
* Makerules ($(py-const)): New rule.
generated: Add $(py-const).
* README.pretty-printers: New file.
* Rules (tests-printers-programs, tests-printers-out, py-env): New.
(others): Depend on $(py-const).
(tests): Depend on $(tests-printers-programs) or $(tests-printers-out),
as required. Pass $(tests-printers) to merge-test-results.sh.
* manual/install.texi: Add requirements for testing the pretty printers.
* nptl/Makefile (gen-py-const-headers, pretty-printers, tests-printers,
CFLAGS-test-mutexattr-printers.c CFLAGS-test-mutex-printers.c,
CFLAGS-test-condattr-printers.c, CFLAGS-test-cond-printers.c,
CFLAGS-test-rwlockattr-printers.c CFLAGS-test-rwlock-printers.c,
tests-printers-libs): Define.
* nptl/nptl-printers.py: New file.
* nptl/nptl_lock_constants.pysym: Likewise.
* nptl/test-cond-printers.c: Likewise.
* nptl/test-cond-printers.py: Likewise.
* nptl/test-condattr-printers.c: Likewise.
* nptl/test-condattr-printers.py: Likewise.
* nptl/test-mutex-printers.c: Likewise.
* nptl/test-mutex-printers.py: Likewise.
* nptl/test-mutexattr-printers.c: Likewise.
* nptl/test-mutexattr-printers.py: Likewise.
* nptl/test-rwlock-printers.c: Likewise.
* nptl/test-rwlock-printers.py: Likewise.
* nptl/test-rwlockattr-printers.c: Likewise.
* nptl/test-rwlockattr-printers.py: Likewise.
* scripts/gen-py-const.awk: Likewise.
* scripts/test_printers_common.py: Likewise.
* scripts/test_printers_exceptions.py: Likewise.
TS 18661-1 defines llogb functions that are like ilogb except that
they return long int instead of int. Corresponding FP_LLOGB* macros
are defined, whose values are required to have the obvious
correspondence to those of the FP_ILOGB* macros.
This patch implements these functions and macros for glibc. llogb
uses the type-generic infrastructure, with an implementation similar
to the wrapper for ilogb but with additional conversion from FP_ILOGB*
to FP_LLOGB*; this approach avoids needing to modify or duplicate any
of the architecture-specific ilogb implementations. Tests are also
based on those for ilogb.
Ideally the llogb functions would alias the ilogb ones when long is
32-bit, but such aliasing requires the associated header declarations
of the different-type alias to be hidden, typically by defining macros
before including the header (see e.g. how
sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to
__hidden_lround before including <math.h>). The infrastructure for
type-generic function implementations does not support defining such
macros at present (since C code can't define a macro whose name is
determined by other macros). So this patch leaves them as separate
functions (similar to e.g. scalbln and scalbn being separate in such a
case as well), but with the remapping of FP_ILOGB* to FP_LLOGB*
conditioned out in the case where it would be the identity map.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb):
New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New
macro.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX):
New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise.
* math/Versions (llogb): New libm symbol at version GLIBC_2.25.
(llogbf): Likewise.
(llogbl): Likewise.
* math/Makefile (gen-libm-calls): Add w_llogbF.
(tests): Add test-fp-llogb-constants.
* math/w_llogb_template.c: New file. Based on
math/w_ilogb_template.c.
* math/libm-test.inc (llogb_test_data): New array.
(llogb_test): New function.
(main): Call llogb_test.
* math/test-fp-llogb-constants.c: New file. Based on
math/test-fp-ilogb-constants.c.
* math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call.
(do_test): Call check_return_llogb.
* math/test-tgmath.c (NCALLS): Increase to 126.
(F(compile_test)): Call llogb.
(F(llogb)): New function.
* manual/math.texi (Exponents and Logarithms): Document llogb,
llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN.
* manual/libm-err-tab.pl (@all_functions): Add llogb.
* sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file.
* sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb.
(CFLAGS-nldbl-llogb.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayloadsig functions for glibc; these are
like the setpayload functions, but produce a signaling NaN instead of
a quiet NaN.
The substance of the implementation was included with the setpayload
implementation, so the new files here just need to wrap the main files
with different defines to build the new functions.
Because the functions store a signaling NaN via a pointer and the
libm-test macros choose a suitable initial value for the variable in
such a case by comparing with the expected value, the relevant macro
needs to clear exceptions after FE_INVALID may have been raised by
that comparison.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(setpayloadsig): New declaration.
* math/Versions (setpayloadsig): New libm symbol at version
GLIBC_2.25.
(setpayloadsigf): Likewise.
(setpayloadsigl): Likewise.
* math/Makefile (libm-calls): Add s_setpayloadsigF.
* math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept
(FE_ALL_EXCEPT) after initializing EXTRA_VAR.
(setpayloadsig_test_data): New array.
(setpayloadsig_test): New function.
(main): Call setpayloadsig_test.
* manual/arith.texi (FP Bit Twiddling): Document setpayloadsig,
setpayloadsigf and setpayloadsigl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file.
* sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
setpayloadsig.
(CFLAGS-nldbl-setpayloadsig.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
The default (top-level) version of bits/mathdef.h defines float_t to
double. It is used on ColdFire, MicroBlaze, Nios II and SH3, all of
which define FLT_EVAL_METHOD to 0, so float_t should be float (and C11
requires a certain correspondence between these typedefs and
FLT_EVAL_METHOD values).
I proposed fixing this default in
<https://sourceware.org/ml/libc-alpha/2015-01/msg00499.html>, with no
objections from architecture maintainers, and this patch makes that
fix. As noted in the NEWS entry added, this might affect the ABIs of
non-glibc libraries (ImageMagick has been mentioned in gcc-patches
discussion of the S/390 case - which is unaffected by this patch), but
as noted in my previous message, affected libraries would have
problems with -mfpmath=sse anyway on 32-bit x86.
A (compilation) testcase is added to verify the required
correspondence of typedefs to FLT_EVAL_METHOD values. This test is
built with -fexcess-precision=standard to avoid any issues with GCC 7
on S/390 providing a more accurate FLT_EVAL_METHOD definition in the
default (no excess precision) mode. (This will also be usable to test
a fix for the recently reported bug about these typedefs on x86_64
-mfpmath=387, as architecture-specific tests can be added that
It is entirely possible that the fixed default makes some
architecture-specific versions of bits/mathdef.h semantically
equivalent to the default version and so no longer required. I don't
intend to investigate that separately from the refactoring I proposed
in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, which
will create as few header variants as possible for each group of
definitions.
Tested (compilation only) with build-many-glibcs.py.
[BZ #20855]
* bits/mathdef.h (float_t): Define to float.
* math/test-flt-eval-method.c: New file.
* math/Makefile (tests): Add test-flt-eval-method.
(CFLAGS-test-flt-eval-method.c): New variable.
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayload functions for glibc; these set a
number (pointed to by a function argument) to a quiet NaN with the
given payload, or to +0 if the given payload is not valid. The
implementations are structured to allow the substance of the
implementation to be shared with the setpayloadsig functions when
those are added.
The semantics in the TS are not entirely clear in the case where the
payload passed to the function is zero (see discussion on the WG14
reflector last month). This patch implements what seems the most
sensible interpretation, that -0 is never valid to give as the
payload, but +0 is valid in the case where the kind of NaN being
generated has its high mantissa bit set so payload 0 is actually
possible in such a NaN.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(setpayload): New declaration.
* math/Versions (setpayload): New libm symbol at version
GLIBC_2.25.
(setpayloadf): Likewise.
(setpayloadl): Likewise.
* math/Makefile (libm-calls): Add s_setpayloadF.
* math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct
test_Ff_b1_data.
(RUN_TEST_Ff_b1): New macro.
(RUN_TEST_LOOP_Ff_b1): Likewise.
(canonicalize_test_data): Update type.
(setpayload_test_data): New array.
(setpayload_test): New function.
(main): Call setpayload_test.
* manual/arith.texi (FP Bit Twiddling): Document setpayload,
setpayloadf and setpayloadl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_setpayload.c: New file.
* sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise.
* sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c:
Likewise.
* sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise.
* sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
setpayload.
(CFLAGS-nldbl-setpayload.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
TS 18661-1 defines SNAN macros for signaling NaN values, suitable for
use in static initializers. This patch adds them to glibc's <math.h>
(provided you are building with GCC 3.3 or later; no attempt is made
to provide any kind of nonconforming fallback for older compilers
without the __builtin_nans functions).
Tested for x86_64 and x86.
* math/math.h
[__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNANF):
New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNAN):
Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNANL):
Likewise.
* manual/arith.texi (Infinity and NaN): Document SNANF, SNAN and
SNANL.
* math/test-double.h (snan_value_MACRO): New macro.
* math/test-float.h (snan_value_MACRO): Likewise.
* math/test-ldouble.h (snan_value_MACRO): Likewise.
* math/libm-test.inc (issignaling_test_data): Add tests of
snan_value_MACRO.
TS 18661-1 defines canonicalize functions to produce a canonical
version of a floating-point representation. This patch implements
these functions for glibc.
As with the iscanonical macro, these functions are oriented to the
decimal floating-point case, where some values have both canonical and
noncanonical representations. However, the functions have a return
value that says whether they succeeded in storing a canonical result;
thus, they can fail for the case of an invalid representation (while
still not making any particular choice from among multiple equally
canonical valid representations of the same value). Since no
floating-point formats in glibc actually have noncanonical valid
representations, a type-generic implementation of these functions can
be used that expects iscanonical to return 0 only for invalid
representations. Now that iscanonical is used within libm.so,
libm_hidden_proto / libm_hidden_def are added for __iscanonicall.
The definition of these functions is intended to correspond to a
convertFormat operation to the same floating-point format. Thus, they
convert signaling NaNs to quiet NaNs, raising the "invalid" exception.
Such a conversion "should" produce "the canonical version of that
signaling NaN made quiet".
libm-test.inc is made to check NaN payloads for the output of these
functions, a new feature (at some point manipulation functions such as
fabs and copysign should have tests added that verify payload
preservation for them). As however some architectures may not follow
the recommended practice of preserving NaN payloads when converting a
signaling NaN to quiet, a new math-tests.h macro
SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008
MIPS; any other architectures seeing test failures for lack of payload
preservation in this case should also define this macro to 0. (If any
cases arise where the sign isn't preserved either, those should have a
similar macro added.)
The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and
adapted to test canonicalizel as well on the same representations.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(canonicalize): New declaration.
* math/Versions (canonicalize): New libm symbol at version
GLIBC_2.25.
(canonicalizef): Likewise.
(canonicalizel): Likewise.
* math/Makefile (gen-libm-calls): Add s_canonicalizeF.
* math/s_canonicalize_template.c: New file.
* math/libm-test.inc: Update comment on functions tested and
testing of NaN payloads.
(TEST_NAN_PAYLOAD): New macro.
(NO_TEST_INLINE): Update value.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(TEST_NAN_PAYLOAD_CANONICALIZE): New macro.
(check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD.
(struct test_Ffp_b1_data): New type.
(RUN_TEST_Ffp_b1): New macro.
(RUN_TEST_LOOP_Ffp_b1): Likewise.
(canonicalize_test_data): New array.
(canonicalize_test): New function.
(main): Call canonicalize_test.
* manual/arith.texi (FP Bit Twiddling): Document canonicalize,
canonicalizef and canonicalizel.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file.
* sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
canonicalize.
(CFLAGS-nldbl-canonicalize.c): New variable.
* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move
to ...
* sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c:
... here.
(do_test): Also test canonicalizel.
* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change
test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm.
* sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New
file.
* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall):
Use libm_hidden_def.
* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ...
* sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here.
(do_test): Also test canonicalizel.
* sysdeps/ieee754/ldbl-96/Makefile (tests): Change
test-iscanonical-ldbl-96 to test-canonical-ldbl-96.
* sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file.
* sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use
libm_hidden_def.
* sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New
macro.
* sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008]
(SNAN_TESTS_PRESERVE_PAYLOAD): Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
After the removal of __malloc_initialize_hook, newly compiled
Emacs binaries are no longer able to use these interfaces.
malloc_get_state is only used during the Emacs build process,
so we provide a stub implementation only. Existing Emacs binaries
will not call this stub function, but still reference the symbol.
The rewritten tst-mallocstate test constructs a dumped heap
which should approximates what existing Emacs binaries pass
to glibc malloc.
ISO/IEC TS 18661-1 adds several functions in the strfrom family to stdlib.
This patch adds strfromd, strfromf, and strfroml. This is being done in
preparation for the new floating-point type, float128. The added functions
convert a floating-point value into a string, with configurable format.
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the getpayload functions for glibc; these
extract the NaN payload (from an argument passed as a pointer, for
which corresponding libm-test support is added) and return it in the
same floating-point type. The return value of these functions is
unspecified for non-NaN arguments; the patch does the simplest thing
to implement, which is that the functions do not check whether the
argument is a NaN and just treat the relevant bits of the
representation as a payload regardless. A conversion from integer to
floating-point is used to produce the required return value, except in
the ldbl-128 case; as 128-bit integers are not supported for all
configurations using ldbl-128, the code constructs the required
floating-point representation of the return value directly instead.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(getpayload): New declaration.
* math/Versions (getpayload): New libm symbol at version
GLIBC_2.25.
(getpayloadf): Likewise.
(getpayloadl): Likewise.
* math/Makefile (libm-calls): Add s_getpayloadF.
* math/libm-test.inc: Include <nan-high-order-bit.h>.
(struct test_f_f_data): Add comment.
(RUN_TEST_fp_f): New macro.
(RUN_TEST_LOOP_fp_f): Likewise.
(getpayload_test_data): New array.
(getpayload_test): New function.
(main): Call getpayload_test.
* math/gen-libm-test.pl (parse_args): Handle 'p' in argument
descriptor.
* manual/arith.texi (FP Bit Twiddling): Document getpayload,
getpayloadf and getpayloadl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_getpayload.c: New file.
* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise.
* sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
TS 18661-1 defines totalorder functions implementing the totalOrder
comparison operation from IEEE 754-2008. This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
(The totalordermag functions will be added in a separate patch.)
The description of the totalOrder operation is complicated. However,
for IEEE interchange binary formats and the preferred quiet NaN
convention, what that complicated description means is that you
interpret the representation as a sign-magnitude integer (with -0
coming before +0) and do a <= comparison on that interpretation. For
finite values and infinities the ordering of the sign-magnitude
integers is just the same as the ordering of floating-point values, so
this extends that to all representations. (Different representations
of the same floating-point value - which includes same quantum in the
decimal case - must still be considered equal by this operation, but
that issue doesn't arise for IEEE interchange binary formats.) So the
complications are:
* When MIPS quiet NaN conventions are in use, the representation of
NaNs needs adjusting before making such an integer comparison. This
patch does this adjustment only when both arguments are NaNs, as
there's no need for it if only one is a NaN, and as long as both are
NaNs you can just flip the relevant bits without any problems from
this turning a NaN into an infinity.
* For the m68k version of ldbl-96, where the high mantissa bit is
"don't care" for infinities and NaNs, representations where it
differs must compare the same. Note: although the testcase for this
compiles, I have not actually tested on m68k.
* For ldbl-128ibm, the low part must be ignored when the high part is
NaN, and low parts of +0 and -0 must be considered the same whatever
the high part.
The new tests in libm-test.inc are the first tests there specifying
particular payloads for input NaNs. Separate tests are also added for
the ldbl-96 and ldbl-128ibm special cases where there are different
representations of the same value that must compare equal (which can't
be covered in libm-test.inc as that only specifies values, not
representations).
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(totalorder): New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder):
New macro.
* math/Versions (totalorder): New libm symbol at version
GLIBC_2.25.
(totalorderf): Likewise.
(totalorderl): Likewise.
* math/Makefile (libm-calls): Add s_totalorderF.
* math/gen-libm-test.pl (parse_args): Escape quotes in test name
string.
* math/libm-test.inc (PAYLOAD_DIG): New macro.
(qnan_value_pl): Likewise.
(snan_value_pl): Likewise.
(qnan_value): Define using qnan_value_pl.
(snan_value): Define using snan_value_pl.
(struct test_ff_i_data): Add comment about which tests use this
structure.
(RUN_TEST_ff_b): New macro.
(RUN_TEST_LOOP_ff_b): Likewise.
(totalorder_test_data): New array.
(totalorder_test): New function.
(main): Call totalorder_test.
* math/test-tgmath.c (NCALLS): Increase to 122.
(F(compile_test)): Call totalorder.
(F(totalorder)): New function.
* manual/arith.texi (FP Comparison Functions): Document
totalorder, totalorderf and totalorderl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_totalorder.c: New file.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
totalorder.
(CFLAGS-nldbl-totalorder.c): New variable.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New
file.
* sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests):
Add test-totalorderl-ldbl-128ibm.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file.
* sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add
test-totalorderl-ldbl-96.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
In ns_name_ntop, the NS_CMPRSFLGS check is no longer needed because
labellen (called earlier) already rejects everything which is not
a plain label (compression references and extended label types).
