[BZ #17750]
* Makefile: add fr_CA.UTF-8 to test-input and LOCALES.
* localedata/fr_CA.UTF-8.in: New file with test data for backward
accents sorting.
* localedata/fr_FR.UTF-8.in: Fix test data for forward accents
sorting.
* localedata/locales/cs_CZ (LC_COLLATE): Remove “define DIACRIT_FORWARD”
* localedata/locales/de_DE (LC_COLLATE): Likewise.
* localedata/locales/hu_HU (LC_COLLATE): Likewise.
* localedata/locales/lb_LU (LC_COLLATE): Likewise.
* localedata/locales/yuw_PG (LC_COLLATE): Likewise.
* localedata/locales/fr_CA (LC_COLLATE): Add “define DIACRIT_BACKWARD”
* localedata/locales/iso14651_t1_common: Use “ifdef DIACRIT_FORWARD”
instead of “ifdef DIACRIT_BACKWARD”.
The only locale which currently needs backward accents sorting is fr_CA.
Therefore, forward accents sorting should be the default.
Before this patch, backwards accent sorting was the default and all
locales except fr_CA had to use
define DIACRIT_FORWARD
before
copy "iso14651_t1"
Most locales didn’t do that and thus got the inappropriate backwards accents sorting
by accident. Now only the fr_CA locale needs to use
define DIACRIT_BACKWARD
before
copy "iso14651_t1"
Original patch slightly modified by: Mike FABIAN <mfabian@redhat.com>
This patch assumes VIS3 support by binutils, which is supported since
version 2.22. This leads to some code simplification, mostly on
multiarch build where there is only one variant instead of previously
two (whether binutils supports VIS3 instructions or not).
For multiarch files where HAVE_AS_VIS3_SUPPORT was checked and
the default implementation was built with a different name, a new
file with (implementation with -generic appended) is added.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* config.h.in (HAVE_AS_VIS3_SUPPORT): Remove check for VIS3 support.
* sysdeps/sparc/configure.ac (HAVE_AS_VIS3_SUPPORT): Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.c: Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fma.c: Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fmaf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fma.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Likewise.
* sysdeps/sparc/sparc-ifunc.h [!HAVE_AS_VIS3_SUPPORT]
(SPARC_ASM_VIS3_IFUNC, SPARC_ASM_VIS3_VIS2_IFUNC): Remove macros.
* sysdeps/sparc/sparc32/sparcv9/Makefile [$(have-as-vis3) != yes]
(ASFLAGS.o, ASFLAGS-.os, ASFLAGS-.op, ASFLAGS-.oS): Remove rules.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
($(have-as-vis3) == yes): Remove conditional.
* sysdeps/sparc/sparc64/Makefile (($(have-as-vis3) == yes)):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-generic.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf-generic.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fma-generic.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaf-generic.c: New
file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fma-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaf-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-generic.c: New file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysdeps/hppa/start.S (_start): Check PIC instead of SHARED. Load
address of $global$ into %dp register earlier. Use pc-relative
instruction sequence for PIC case.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes i386 libm function implementations use
libm_alias_float (or libm_alias_float_other in cases where the main
symbol name is defined with versioned_symbol) to define function
aliases.
Tested with build-many-glibcs.py for all its i386 configurations that
installed stripped shared libraries are unchanged by the patch, as
well as running the full glibc testsuite for i686.
* sysdeps/i386/fpu/s_asinhf.S: Include <libm-alias-float.h>.
(asinhf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_atanf.S: Include <libm-alias-float.h>.
(atanf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_cbrtf.S: Include <libm-alias-float.h>.
(cbrtf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_ceilf.S: Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_copysignf.S: Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_expm1f.S: Include <libm-alias-float.h>.
(expm1f): Define using libm_alias_float.
* sysdeps/i386/fpu/s_fabsf.S: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_floorf.S: Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_fmaxf.S: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_fminf.S: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_frexpf.S: Include <libm-alias-float.h>.
(frexpf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_llrintf.S: Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_logbf.S: Include <libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_lrintf.S: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_nearbyintf.S: Include <libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_remquof.S: Include <libm-alias-float.h>.
(remquof): Define using libm_alias_float.
* sysdeps/i386/fpu/s_rintf.S: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_truncf.S: Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/multiarch/e_exp2f.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/e_expf.c: Include
<libm-alias-float.h>.
(expf): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/e_log2f.c: Include
<libm-alias-float.h>.
(log2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/e_logf.c: Include
<libm-alias-float.h>.
(logf): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/e_powf.c: Include
<libm-alias-float.h>.
(powf): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/s_cosf.c: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/multiarch/s_sincosf.c: Include
<libm-alias-float.h>.
(sincosf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/multiarch/s_sinf.c: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/s_fmaxf.S: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/s_fminf.S: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/i386/i686/multiarch/s_fmaf.c: Include
<libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes i386 libm function implementations use
libm_alias_double to define function aliases.
Tested with build-many-glibcs.py for all its i386 configurations that
installed stripped shared libraries are unchanged by the patch, as
well as running the full glibc testsuite for i686.
* sysdeps/i386/fpu/s_asinh.S: Include <libm-alias-double.h>.
(asinh): Define using libm_alias_double.
* sysdeps/i386/fpu/s_atan.S: Include <libm-alias-double.h>.
(atan): Define using libm_alias_double.
* sysdeps/i386/fpu/s_cbrt.S: Include <libm-alias-double.h>.
(cbrt): Define using libm_alias_double.
* sysdeps/i386/fpu/s_ceil.S: Include <libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/i386/fpu/s_copysign.S: Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/i386/fpu/s_expm1.S: Include <libm-alias-double.h>.
(expm1): Define using libm_alias_double.
* sysdeps/i386/fpu/s_fabs.S: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/i386/fpu/s_fdim.c: Include <libm-alias-double.h>.
(fdim): Define using libm_alias_double.
* sysdeps/i386/fpu/s_floor.S: Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/i386/fpu/s_fmax.S: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/i386/fpu/s_fmin.S: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/i386/fpu/s_frexp.S: Include <libm-alias-double.h>.
(frexp): Define using libm_alias_double.
* sysdeps/i386/fpu/s_llrint.S: Include <libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/i386/fpu/s_logb.S: Include <libm-alias-double.h>.
(logb): Define using libm_alias_double.
* sysdeps/i386/fpu/s_lrint.S: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/i386/fpu/s_nearbyint.S: Include <libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/i386/fpu/s_remquo.S: Include <libm-alias-double.h>.
(remquo): Define using libm_alias_double.
* sysdeps/i386/fpu/s_rint.S: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/i386/fpu/s_trunc.S: Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/i386/i686/fpu/s_fmax.S: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/i386/i686/fpu/s_fmin.S: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/i386/i686/multiarch/s_fma.c: Include <libm-alias-double.h>.
(fma): Define using libm_alias_double.
A note header has 3 4-bytes fields, followed by note name and note
descriptor. According to gABI, in a note entry, the note name field,
not note name size, is padded for the note descriptor. And the note
descriptor field, not note descriptor size, is padded for the next
note entry. Notes are aligned to 4 bytes in 32-bit objects and 8 bytes
in 64-bit objects.
For all GNU notes, the name is "GNU" which is 4 bytes. They have the
same format in the first 16 bytes in both 32-bit and 64-bit objects.
They differ by note descriptor size and note type. So far, .note.ABI-tag
and .note.gnu.build-id notes are always aligned to 4 bytes. The exsting
codes compute the note size by aligning the note name size and note
descriptor size to 4 bytes. It happens to produce the same value as
the actual note size by luck since the name size is 4 and offset of the
note descriptor is 16. But it will produce the wrong size when note
alignment is 8 bytes in 64-bit objects.
This patch defines ELF_NOTE_DESC_OFFSET and ELF_NOTE_NEXT_OFFSET to
properly compute offsets of note descriptor and next note. It uses
alignment of PT_NOTE segment to support both 4-byte and 8-byte note
alignments in 64-bit objects. To handle PT_NOTE segments with
incorrect alignment, which may lead to an infinite loop, if segment
alignment is less than 4, we treate alignment as 4 bytes since some
note segments have 0 or 1 byte alignment.
[BZ #22370]
* elf/dl-hwcaps.c (ROUND): Removed.
(_dl_important_hwcaps): Replace ROUND with ELF_NOTE_DESC_OFFSET
and ELF_NOTE_NEXT_OFFSET.
* elf/dl-load.c (ROUND): Removed.
(open_verify): Replace ROUND with ELF_NOTE_NEXT_OFFSET.
* elf/readelflib.c (ROUND): Removed.
(process_elf_file): Replace ROUND with ELF_NOTE_NEXT_OFFSET.
* include/elf.h [!_ISOMAC]: Include <libc-pointer-arith.h>.
[!_ISOMAC] (ELF_NOTE_DESC_OFFSET): New.
[!_ISOMAC] (ELF_NOTE_NEXT_OFFSET): Likewise.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes an s390 libm function implementation use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py for s390-linux-gnu and
s390x-linux-gnu that installed stripped shared libraries are unchanged
by the patch.
* sysdeps/s390/fpu/s_fmaf.c: Include <libm-alias-float.h>.
[!__fmaf] (fmaf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes s390 libm function implementations use
libm_alias_double to define function aliases. This allows
sysdeps/unix/sysv/linux/s390/fpu/s_fma.c to be removed, as
libm_alias_double handles symbol versioning for long double compat
symbols.
Tested with build-many-glibcs.py for s390-linux-gnu and
s390x-linux-gnu that installed stripped shared libraries are unchanged
by the patch.
* sysdeps/s390/fpu/s_fma.c: Include <libm-alias-double.h>.
[!__fma] (fma): Define using libm_alias_double.
* sysdeps/unix/sysv/linux/s390/fpu/s_fma.c: Remove.
The LOCALES variable in the localedata had two instances of cs_CZ
which generated the following warning:
../gen-locales.mk:11: target '/opt/build/localedata/cs_CZ.UTF-8/LC_CTYPE' given more than once in the same rule
Dropped the duplicate entry.
This patch adds BENCHSET variable to benchtests/Makefile in order to
provide the capability to run a list of subsets of benchmark tests, ie;
make bench BENCHSET="bench-pthread bench-math malloc-thread"
This helps users to benchmark specific glibc area
ChangeLog:
* benchtests/Makefile:Add BENCHSET to allow subsets of
benchmarks to be run.
* benchtests/README: Add documentation for: Running subsets of
benchmarks.
Signed-off-by: Victor Rodriguez <victor.rodriguez.bahena@intel.com>
Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Reviewed-By: Siddhesh Poyarekar <siddhesh@sourceware.org>
When executing bench-math the benchmark output is invalid with this
error msg:
Invalid benchmark output: 'workload-spec2006.wrf' does not match any of
the regexes: '^[_a-zA-Z0-9]*$¹ or Invalid benchmark output: Additional
properties are not allowed ('workload-spec2006.wrf' was unexpected)
The error was seen when running the test:
workload-spec2006.wrf, 'stack=1024,guard=1' and 'stack=1024,guard=2'.
The problem is that the current regex's do not accept the hyphen, dot, equal
and comma in the output.
This patch changes the regex in benchout.schema.json to accept symbols in
benchmark tests names.
ChangeLog:
* benchtests/scripts/benchout.schema.json: Fix regex to accept a
wider range of tests names.
Signed-off-by: Victor Rodriguez <victor.rodriguez.bahena@intel.com>
Reviewed-By: Siddhesh Poyarekar <siddhesh@sourceware.org>
Benchmark workload-spec2006.wrf does not produce max, min or mean
results but instead produce throughput. This is represented in
benchtests/bench-skeleton.c. This patch adjust benchout.schema.json to consider
bench.out from bench-math benchmarks as valid
ChangeLog:
* benchtests/scripts/benchout.schema.json: Add throughput as accepted
result from property and remove "max", min" and "mean" from required
properties based on benchtests/bench-skeleton.c.
Signed-off-by: Victor Rodriguez <victor.rodriguez.bahena@intel.com>
Reviewed-By: Siddhesh Poyarekar <siddhesh@sourceware.org>
These tests need a working Internet connection with DNS.
We have additional coverage of getaddrinfo through the resolv tests, so
the loss of default test coverage seems acceptable.
This patch refactor the SPARC64 ifunc selector to a C implementation.
The x86_64 implementation is used as default, which resulted in common
definitions (ifunc-init.h) used on both architectures. No functional
change is expected, including ifunc resolution rules.
Checked on sparc64-linux-gnu, sparcv9-linux-gnu and x86_64-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy-ultra1.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/mempcpy.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-memcpy.h: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-ultra1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/mempcpy.c: Likewise.
* sysdeps/sparc/sparc-ifunc.h (sparc_libc_ifunc_redirected): New
macro.
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
[$(subdir) = string] (sysdep_routines): Add memcpy-ultra1.
* sysdeps/sparc/sparc64/multiarch/Makefile [$(subdir) = string]
(sysdep_routines): Add memcpy-ultra1.
* sysdeps/sparc/sparc64/multiarch/memcpy.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
[BZ #22336]
* localedata/locales/cs_CZ (LC_COLLATE): Use “copy "iso14651_t1"”
and implement the collation rules for cs from CLDR on top of that.
* Makefile: Add cs_CZ.UTF-8 to test-input and to the list
of locales to be built for testing.
* cs_CZ.UTF-8.in: New file with test data to test the Czech sorting.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes alpha libm function implementations use
libm_alias_float macros to define function aliases. In the case of
the ABI compatibility for complex functions, libm_alias_float_other is
used, with the cfloat_versions macro adjusted to take a function name
argument without the trailing 'f' to facilitate this, and
cfloat_versions dealing with calling libm_alias_float_other (except
for clog10f, which doesn't use that macro because of the complexity
associated with __clog10f also being exported).
Tested with build-many-glibcs.py for alpha-linux-gnu that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/alpha/fpu/cfloat-compat.h: Include <libm-alias-float.h>.
(cfloat_versions): Take function argument without trailing 'f'.
Call libm_alias_float_other.
* sysdeps/alpha/fpu/cabsf.c: Update call to cfloat_versions.
* sysdeps/alpha/fpu/cargf.c: Likewise.
* sysdeps/alpha/fpu/cimagf.c: Likewise.
* sysdeps/alpha/fpu/conjf.c: Likewise.
* sysdeps/alpha/fpu/crealf.c: Likewise.
* sysdeps/alpha/fpu/s_cacosf.c: Likewise.
* sysdeps/alpha/fpu/s_cacoshf.c: Likewise.
* sysdeps/alpha/fpu/s_casinf.c: Likewise.
* sysdeps/alpha/fpu/s_casinhf.c: Likewise.
* sysdeps/alpha/fpu/s_catanf.c: Likewise.
* sysdeps/alpha/fpu/s_catanhf.c: Likewise.
* sysdeps/alpha/fpu/s_ccosf.c: Likewise.
* sysdeps/alpha/fpu/s_ccoshf.c: Likewise.
* sysdeps/alpha/fpu/s_cexpf.c: Likewise.
* sysdeps/alpha/fpu/s_clogf.c: Likewise.
* sysdeps/alpha/fpu/s_cpowf.c: Likewise.
* sysdeps/alpha/fpu/s_cprojf.c: Likewise.
* sysdeps/alpha/fpu/s_csinf.c: Likewise.
* sysdeps/alpha/fpu/s_csinhf.c: Likewise.
* sysdeps/alpha/fpu/s_csqrtf.c: Likewise.
* sysdeps/alpha/fpu/s_ctanf.c: Likewise.
* sysdeps/alpha/fpu/s_ctanhf.c: Likewise.
* sysdeps/alpha/fpu/s_clog10f.c: Include <libm-alias-float.h>.
(clog10f): Use libm_alias_float_other.
* sysdeps/alpha/fpu/s_ceilf.c: Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_copysignf.c: Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_fabsf.c: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_floorf.c: Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_fmax.S: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_fmin.S: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_lrintf.c: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
(llrintf): Likewise.
* sysdeps/alpha/fpu/s_lroundf.c: Include <libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
(llroundf): Likewise.
* sysdeps/alpha/fpu/s_rintf.c: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_truncf.c: Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes aarch64 libm function implementations use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py for aarch64-linux-gnu that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/aarch64/fpu/s_ceilf.c: Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_floorf.c: Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_fmaf.c: Include <libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_fmaxf.c: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_fminf.c: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_llrintf.c: Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_llroundf.c: Include <libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_lrintf.c: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_lroundf.c: Include <libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_nearbyintf.c: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_rintf.c: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_roundf.c: Include <libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_truncf.c: Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes alpha libm function implementations use
libm_alias_double to define function aliases. This also simplifies
the code because the compatibility for long double = double is handled
by libm_alias_double instead of locally in each source file.
Tested with build-many-glibcs.py for alpha-linux-gnu that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/alpha/fpu/s_ceil.c: Include <libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_copysign.c: Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_fabs.c: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_floor.c: Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_fmax.S: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_fmin.S: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_lrint.c: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
(llrint): Likewise.
* sysdeps/alpha/fpu/s_lround.c: Include <libm-alias-double.h>.
(lround): Define using libm_alias_double.
(llround): Likewise.
* sysdeps/alpha/fpu/s_rint.c: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_trunc.c: Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
This patch makes the ldbl-opt libm_alias_double implementation support
use from .S sources, by adding a semicolon after its use of
weak_alias.
Tested (compilation only) with build-many-glibcs.py for
alpha-linux-gnu, in conjunction with a patch introducing uses of
libm_alias_double in alpha .S files.
* sysdeps/ieee754/ldbl-opt/libm-alias-double.h
(libm_alias_double_r): Add semicolon after weak_alias call.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes aarch64 libm function implementations use
libm_alias_double to define function aliases.
Tested with build-many-glibcs.py for aarch64-linux-gnu that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/aarch64/fpu/s_ceil.c: Include <libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_floor.c: Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_fma.c: Include <libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_fmax.c: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_fmin.c: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_llrint.c: Include <libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_llround.c: Include <libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_lrint.c: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_lround.c: Include <libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_nearbyint.c: Include <libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_rint.c: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_round.c: Include <libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_trunc.c: Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
This patch continues filling out TS 18661-3 support by adding *f64x
function aliases on platforms with _Float64x support. (It so happens
the set of such platforms is exactly the same as the set of platforms
with _Float128 support, although on x86_64, x86 and ia32 the _Float64x
format is Intel extended rather than binary128.) The API provided
corresponds exactly to that provided for _Float128, mostly coming from
TS 18661-3. As these functions always alias those for another type
(long double, _Float128 or both), __* function names are not provided,
as in other cases of alias types.
Given the preparation done in previous patches, this one just enables
the feature via Makeconfig and bits/floatn.h, adds symbol versions,
and updates documentation and ABI baselines. The symbol versions are
present unconditionally as GLIBC_2.27 in the relevant Versions files,
as it's OK for those to specify versions for functions that may not be
present in some configurations; no additional complexity is needed
unless in future some configuration gains support for this type that
didn't have such support in 2.27. The Makeconfig additions for ia64
and x86 aren't strictly needed, as those configurations also get
float64x-alias-fcts definitions from
sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given
that _Float64x is not _Float128 for those configurations.
A libm-test-ulps update for x86 is included. This is because
bits/mathinline.h does not have _Float64x support added and for two
functions the use of out-of-line functions results in increased ulps
(ifloat64x shares ulps with ildouble / ifloat128 as appropriate).
Given that we'd like generally to eliminate bits/mathinline.h
optimizations, preferring to have such optimizations in GCC instead,
it seems reasonable not to add such support there for new types. GCC
support for _FloatN / _FloatNx built-in functions is limited, but has
been improved in GCC 8, and at some point I hope the full set of libm
built-in functions in GCC, and other optimizations with
per-floating-type aspects, will be enabled for all _FloatN / _FloatNx
types.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable.
* sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/x86/Makeconfig: New file.
* bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* bits/floatn.h (__HAVE_FLOAT64X): New macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X):
Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64x.
* math/Versions (GLIBC_2.27): Add _Float64x functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
Combine the four places where link maps are sorted into a single function.
This also moves the logic to skip the first map (representing the main
binary) to the callers.
This patch uses libm_alias_float128 in place of weak_alias more in
sysdeps/ieee754/float128, in preparation for defining _Float64x
aliases when appropriate.
Tested for x86_64, and for powerpc64le (compilation only) with
build-many-glibcs.py in conjunction with _Float64x support patches.
* sysdeps/ieee754/float128/s_fromfpf128.c (fromfpf128): Define
using libm_alias_float128.
* sysdeps/ieee754/float128/s_fromfpxf128.c (fromfpxf128):
Likewise.
* sysdeps/ieee754/float128/s_setpayloadf128.c (setpayloadf128):
Likewise.
* sysdeps/ieee754/float128/s_setpayloadsigf128.c
(setpayloadsigf128): Likewise.
* sysdeps/ieee754/float128/s_ufromfpf128.c (ufromfpf128):
Likewise.
* sysdeps/ieee754/float128/s_ufromfpxf128.c (ufromfpxf128):
Likewise.
Supporting _Float64x on powerpc64le means that tests of that type need
to use -mfloat128 just like tests of _Float128. This patch adds the
necessary uses of that option.
Tested (compilation only) for powerpc64le with build-many-glibcs.py,
in conjunction with _Float64x support patches.
* sysdeps/powerpc/powerpc64le/Makefile ($(foreach
suf,$(all-object-suffixes),$(objpfx)test-float64x%$(suf))): Add
-mfloat128 to CFLAGS.
($(foreach
suf,$(all-object-suffixes),$(objpfx)test-ifloat64x%$(suf))):
Likewise.
(CFLAGS-libm-test-support-float64x.c): New variable.
($(objpfx)test-float64x% $(objpfx)test-ifloat64x%): Add
$(f128-loader-link) to gnulib-tests.
This patch adds support for libm_alias_ldouble and libm_alias_float128
to create *f64x function aliases when appropriate.
Making such aliases work for functions defined in assembly sources
requires adding some semicolons after weak_alias calls in alias macro
definitions. For C, semicolons are already present in the macros
called when required, but a GNU C extension allows excess semicolons
at file scope in a source file (and glibc already uses this), so it is
OK to have extra semicolons present in the macro definitions. For
assembly sources, making multiple alias macro calls from a single
macro expansion means there are no newlines between the calls, so an
explicit separator is needed. If hppa were to have .S sources in
libm, a more complicated approach would be needed that used
ASM_LINE_SEP when building assembly sources but not for C, but right
now there are no such sources so just using a semicolon (as already
present unconditionally in some such macro expansions) suffices.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* sysdeps/generic/libm-alias-float128.h: Include <bits/floatn.h>.
(libm_alias_float128_other_r): If
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE], define f64x
alias.
(libm_alias_float128_r): Add semicolon after weak_alias call.
* sysdeps/generic/libm-alias-ldouble.h
(libm_alias_ldouble_other_r_f128): New macro.
(libm_alias_ldouble_other_r_f64x): Likewise.
(libm_alias_ldouble_other_r): Use libm_alias_ldouble_other_r_f128
and libm_alias_ldouble_other_r_f64x.
(libm_alias_ldouble_r): Add semicolon after weak_alias call.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h
(libm_alias_ldouble_other_r_f128): New macro.
(libm_alias_ldouble_other_r_f64x): Likewise.
(libm_alias_ldouble_other_r): Use libm_alias_ldouble_other_r_f128
and libm_alias_ldouble_other_r_f64x.
This patch adds support for defining strfromf64x as a function alias
(of strfroml or strfromf128, as appropriate) when _Float64x is
supported.
Tested for x86_64, including in conjunction with _Float64x support
patches, and also tested build for other configurations (in
conjunction with _Float64x support patches) with build-many-glibcs.py
to cover the various different files needing updating to define these
aliases.
* stdlib/strfroml.c: Always include <stdlib.h>.
[__HAVE_FLOAT64X_LONG_DOUBLE] (strfromf64x): Define and later
undefine as macro and define as weak alias.
* sysdeps/ieee754/float128/strfromf128.c: Include <bits/floatn.h>.
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE]: Include
<stdlib.h>.
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strfromf64x):
Define and later undefine as macro and define as weak alias.
This patch adds support for defining strtof64x, strtof64x_l, wcstof64
and wcstof64x_l function aliases when _Float64x is supported.
Tested for x86_64, including in conjunction with _Float64x support
patches, and also tested build for other configurations (in
conjunction with _Float64x support patches) with build-many-glibcs.py
to cover the various different files needing updating to define these
aliases.
* stdlib/strtold.c [__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* sysdeps/ieee754/float128/strtof128.c: Include <bits/floatn.h>.
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/float128/strtof128_l.c
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-128/strtold_l.c
[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-96/strtold_l.c
[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
This patch adds support for testing _Float64x libm functions. A
configuration with such functions sets float64x-alias-fcts = yes in a
sysdeps Makeconfig file; until such settings are added, this test
support is inactive.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* math/test-float64x.h: New file.
* math/Makefile (type-float64x-yes): New variable.
(test-types): Add $(type-float64x-$(float64x-alias-fcts)).
math_private.h uses __MATH_TG in defining the min_of_type macro used
within libm, with min_of_type_<suffix> macros for each type. This
runs into problems with __MATH_TG expansions used with additional
_FloatN and _FloatNx type support, because those can end up
macro-expanding the FUNC argument to __MATH_TG before it gets
concatenated with a suffix - meaning that min_of_type_ can't
simultaneously be the macro name for double, and a prefix to other
macro names, since the latter case requires such premature macro
expansion not to occur. (This is not a problem for the uses of
__MATH_TG in installed headers because FUNC there is a function name
in the implementation namespace, and the suffixes themselves don't get
macro-expanded.)
This patch fixes the problem by making min_of_type_<suffix> macros
function-like, so no macro expansion occurs when min_of_type_ is
expanded on its own as a macro argument, only later when followed by
() after expansion.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* sysdeps/generic/math_private.h (min_of_type_f): Make into a
function-like macro.
(min_of_type_): Likewise.
(min_of_type_l): Likewise.
(min_of_type_f128): Likewise.
(min_of_type): Pass () as last argument of __MATH_TG.
The tst-strtod-round-skeleton.c conditionals relating to handling of
_Float64x require associated <float.h> macros, which requires
__STDC_WANT_IEC_60559_TYPES_EXT__ to be defined before <float.h> is
included if _Float64x is supported. This patch adds the necessary
definition.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* stdlib/tst-strtod-round-skeleton.c
(__STDC_WANT_IEC_60559_TYPES_EXT__): Define before including
headers.
math/gen-tgmath-tests.py was missing a create_type argument when
creating the internal types for combinations of long double with
_Float64 and _Float64x, so resulting in output that did not compile
when glibc support for those types was enabled. This patch adds the
missing argument so that the tests properly compile in that case.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* math/gen-tgmath-tests.py (Type.init_types): Pass suffix argument
for combinations of long double with _Float64 and _Float64x.
This patch moves wcstof128 and wcstof128_l Versions file entries from
stdlib/Versions to wcsmbs/Versions, which is a more appropriate place
for them.
Tested for x86_64, and with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.
* stdlib/Versions (libc): Move entries for wcstof128 and
wcstof128_l to ....
* wcsmbs/Versions (libc): ... here.
Include <float128-abi.h>.
This header file enables sharing of portable declarations and
definitions across all Linux architectures, including hppa (which does
not use <bits/mman-linux.h>).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
As described in BZ#22457 an interpose malloc can free an invalid
pointer for fallback preadv implementation. Fortunately this is
just and issue on microblaze-linux-gnu running kernels older than
3.15. This patch fixes it by calling mmap/unmap instead of
posix_memalign/ free.
Checked on microblaze-linux-gnu check with run-built-tests=no and
by using the sysdeps/posix implementation on x86_64-linux-gnu (just
for sanity test where it shown no regression).
[BZ #22457]
* sysdeps/posix/preadv_common.c (PREADV): Use mmap/munmap instead of
posix_memalign/free.
* sysdeps/posix/pwritev_common.c (PWRITEV): Likewise.
[BZ #22469]
* localedata/locales/pl_PL (LC_COLLATE): Use “copy "iso14651_t1"”
and implement the collation rules for pl from CLDR on top of that.
* Makefile: Add pl_PL.UTF-8 to test-input and to the list
of locales to be built for testing.
* pl_PL.UTF-8.in: New file with test data to test the Polish sorting.
Continuing the preparation for additional _FloatN / _FloatNx aliases,
this patch makes long double functions in sysdeps/ia64/fpu use
libm_alias_ldouble macros, so that they can have _Float64x aliases
added in future.
Most ia64 libm functions are defined using ia64-specific macros in
libm-symbols.h. These are left unchanged, with libm-alias-ldouble.h
included from libm-symbols.h (and the expectation that other
libm-alias-*.h headers will be included from there as well in future),
and libm_alias_ldouble_other then being used in most cases to define
aliases for any additional types (currently the empty set). Functions
that used weak_alias are converted to use libm_alias_ldouble.
Tested (compilation only) with build-many-glibcs.py for ia64,
including that installed stripped shared libraries are unchanged by
the patch.
* sysdeps/ia64/fpu/libm-symbols.h: Include <libm-alias-ldouble.h>.
* sysdeps/ia64/fpu/e_acoshl.S (acoshl): Use
libm_alias_ldouble_other.
* sysdeps/ia64/fpu/e_acosl.S (acosl): Likewise.
* sysdeps/ia64/fpu/e_asinl.S (asinl): Likewise.
* sysdeps/ia64/fpu/e_atanhl.S (atanhl): Likewise.
* sysdeps/ia64/fpu/e_coshl.S (coshl): Likewise.
* sysdeps/ia64/fpu/e_exp10l.S (exp10l): Likewise.
* sysdeps/ia64/fpu/e_exp2l.S (exp2l): Likewise.
* sysdeps/ia64/fpu/e_fmodl.S (fmodl): Likewise.
* sysdeps/ia64/fpu/e_hypotl.S (hypotl): Likewise.
* sysdeps/ia64/fpu/e_lgammal_r.c (lgammal_r): Define using
libm_alias_ldouble_r.
* sysdeps/ia64/fpu/e_log2l.S (log2l): Use
libm_alias_ldouble_other.
* sysdeps/ia64/fpu/e_logl.S (logl): Likewise.
(log10l): Likewise.
* sysdeps/ia64/fpu/e_powl.S (powl): Likewise.
* sysdeps/ia64/fpu/e_remainderl.S (remainderl): Likewise.
* sysdeps/ia64/fpu/e_sinhl.S (sinhl): Likewise.
* sysdeps/ia64/fpu/e_sqrtl.S (sqrtl): Likewise.
* sysdeps/ia64/fpu/libm_sincosl.S (sincosl): Likewise.
* sysdeps/ia64/fpu/s_asinhl.S (asinhl): Likewise.
* sysdeps/ia64/fpu/s_atanl.S (atanl): Likewise.
(atan2l): Likewise.
* sysdeps/ia64/fpu/s_cbrtl.S (cbrtl): Likewise.
* sysdeps/ia64/fpu/s_ceill.S (ceill): Likewise.
* sysdeps/ia64/fpu/s_copysign.S (copysignl): Define using
libm_alias_ldouble.
* sysdeps/ia64/fpu/s_cosl.S (sinl): Use libm_alias_ldouble_other.
(cosl): Likewise.
* sysdeps/ia64/fpu/s_erfcl.S (erfcl): Likewise.
* sysdeps/ia64/fpu/s_erfl.S (erfl): Likewise.
* sysdeps/ia64/fpu/s_expm1l.S (expm1l): Likewise.
(expl): Likewise.
* sysdeps/ia64/fpu/s_fabsl.S (fabsl): Likewise.
* sysdeps/ia64/fpu/s_fdiml.S (fdiml): Likewise.
* sysdeps/ia64/fpu/s_floorl.S (floorl): Likewise.
* sysdeps/ia64/fpu/s_fmal.S (fmal): Likewise.
* sysdeps/ia64/fpu/s_fmaxl.S (fmaxl): Likewise.
* sysdeps/ia64/fpu/s_frexpl.c (frexpl): Likewise.
* sysdeps/ia64/fpu/s_ldexpl.c (ldexpl): Likewise.
* sysdeps/ia64/fpu/s_log1pl.S (log1pl): Likewise.
* sysdeps/ia64/fpu/s_logbl.S (logbl): Likewise.
* sysdeps/ia64/fpu/s_modfl.S (modfl): Likewise.
* sysdeps/ia64/fpu/s_nearbyintl.S (nearbyintl): Define using
libm_alias_ldouble.
* sysdeps/ia64/fpu/s_nextafterl.S (nextafterl): Use
libm_alias_ldouble_other.
* sysdeps/ia64/fpu/s_rintl.S (rintl): Likewise.
* sysdeps/ia64/fpu/s_roundl.S (roundl): Likewise.
* sysdeps/ia64/fpu/s_scalbnl.c (scalbnl): Define using
libm_alias_ldouble.
* sysdeps/ia64/fpu/s_tanhl.S (tanhl): Use
libm_alias_ldouble_other.
* sysdeps/ia64/fpu/s_tanl.S (tanl): Likewise.
* sysdeps/ia64/fpu/s_truncl.S (truncl): Likewise.
* sysdeps/ia64/fpu/w_lgammal_main.c
[BUILD_LGAMMA && !USE_AS_COMPAT] (lgammal): Likewise.
* sysdeps/ia64/fpu/w_tgammal_compat.S (tgammal): Likewise.
It does not make sense to register separate cleanup functions for arena
and tcache since they're always going to be called together. Call the
tcache cleanup function from within arena_thread_freeres since it at
least makes the order of those cleanups clear in the code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Since
commit 8b0e795aaa
Author: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Date: Wed Nov 1 11:49:05 2017 -0200
Simplify Linux sig{timed}wait{info} implementations
sigwait can fail with EINTR. Applications do not expect that, and the
error code is not documented in POSIX or the manual pages.
This commit restores the previous behavior by retrying the system call
on EINTR. It also returns the error code, not -1, on the remaing
errors.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The system call is somewhat obscure because it is closely related
to file descriptor sealing. However, it is also the recommended
way to create alias mappings, which is why it has more general use.
No emulation is provided. Except for the name of the
/proc/self/fd links, it would be possible to implement an
approximation using O_TMPFILE and tmpfs, but this does not appear
to be worth the added complexity.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
This patch, relative to a tree with
<https://sourceware.org/ml/libc-alpha/2017-11/msg00797.html> (pending
review) applied, obsoletes p_secstodate, making the underlying
function __p_secstodate into a compat symbol not available for new
binaries or ports. The calls in ns_print.c (part of incomplete
handling of TKEY) are changed to use %lu to print times instead of
trying to pretty-print the times any more.
Tested for x86_64.
* resolv/res_debug.c (p_secstodate): Condition definition on
[SHLIB_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)]. Define
directly as __p_secstodate, and as a compat symbol. Do not use
libresolv_hidden_def.
* resolv/resolv.h (p_secstodate): Remove macro and function
declaration.
* resolv/ns_print.c (ns_sprintrrf): Print times with %lu, not
using p_secstodate.
* include/resolv.h (__p_secstodate): Do not use
libresolv_hidden_proto.
* resolv/Makefile (tests): Move tst-p_secstodate to ....
(tests-internal): ... here.
* resolv/tst-p_secstodate.c: Include <shlib-compat.h>. Condition
all contents on [TEST_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)]
and declare and use __p_secstodate and use compat_symbol_reference
in that case.
[!TEST_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)] (do_test): Add
implementation returning 77.
The resolv/res_debug.c function p_secstodate (which is a public
function exported from libresolv, taking an unsigned long argument)
does:
struct tm timebuf;
time = __gmtime_r(&clock, &timebuf);
time->tm_year += 1900;
time->tm_mon += 1;
sprintf(output, "%04d%02d%02d%02d%02d%02d",
time->tm_year, time->tm_mon, time->tm_mday,
time->tm_hour, time->tm_min, time->tm_sec);
If __gmtime_r returns NULL (because the year overflows the range of
int), this will dereference a null pointer. Otherwise, if the
computed year does not fit in four characters, this will cause a
buffer overrun of the fixed-size 15-byte buffer. With current GCC
mainline, there is a compilation failure because of the possible
buffer overrun.
I couldn't find a specification for how this function is meant to
behave, but Paul pointed to RFC 4034 as relevant to the cases where
this function is called from within glibc. The function's interface
is inherently problematic when dates beyond Y2038 might be involved,
because of the ambiguity in how to interpret 32-bit timestamps as such
dates (the RFC suggests interpreting times as being within 68 years of
the present date, which would mean some kind of interface whose
behavior depends on the present date).
This patch works on the basis of making a minimal fix in preparation
for obsoleting the function. The function is made to handle times in
the interval [0, 0x7fffffff] only, on all platforms, with <overflow>
used as the output string in other cases (and errno set to EOVERFLOW
in such cases). This seems to be a reasonable state for the function
to be in when made a compat symbol by a future patch, being compatible
with any existing uses for existing timestamps without trying to work
for later timestamps. Results independent of the range of time_t also
simplify the testcase.
I couldn't persuade GCC to recognize the ranges of the struct tm
fields by adding explicit range checks with a call to
__builtin_unreachable if outside the range (this looks similar to
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80776>), so having added
a range check on the input, this patch then disables the
-Wformat-overflow= warning for the sprintf call (I prefer that to the
use of strftime, as being more transparently correct without knowing
what each of %m and %M etc. is).
I do not know why this build failure should be new with mainline GCC
(that is, I don't know what GCC change might have introduced it, when
the basic functionality for such warnings was already in GCC 7).
I do not know if this is a security issue (that is, if there are
plausible ways in which a date before -999 or after 9999 from an
untrusted source might end up in this function). The system clock is
arguably an untrusted source (in that e.g. NTP is insecure), but
probably not to that extent (NTP can't communicate such wild
timestamps), and uses from within glibc are limited to 32-bit inputs.
Tested with build-many-glibcs.py that this restores the build for arm
with yesterday's mainline GCC. Also tested for x86_64 and x86.
[BZ #22463]
* resolv/res_debug.c: Include <libc-diag.h>.
(p_secstodate): Assert time_t at least as wide as u_long. On
overflow, use integer seconds since the epoch as output, or use
"<overflow>" as output and set errno to EOVERFLOW if integer
seconds since the epoch would be 14 or more characters.
(p_secstodate) [__GNUC_PREREQ (7, 0)]: Disable -Wformat-overflow=
for sprintf call.
* resolv/tst-p_secstodate.c: New file.
* resolv/Makefile (tests): Add tst-p_secstodate.
($(objpfx)tst-p_secstodate): Depend on $(objpfx)libresolv.so.
sysdeps/sparc/sparc64/soft-fp has files s_frexpl.c, s_scalblnl.c and
s_scalbnl.c that are never used because the ldbl-128 versions always
come first in the sysdeps directory ordering. This patch removes the
unused files.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* sysdeps/sparc/sparc64/soft-fp/s_frexpl.c: Remove file.
* sysdeps/sparc/sparc64/soft-fp/s_scalblnl.c: Likewise.
* sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c: Likewise.
