The AVX2 strcmp implementation uses the 'bzhi' instruction, which
belongs to the BMI2 CPU feature.
NB: It also uses the 'tzcnt' BMI1 instruction, but it is executed as BSF
as BSF if the CPU doesn't support TZCNT, and produces the same result
for non-zero input.
Partially fixes: b77b06e0e2 ("x86: Optimize strcmp-avx2.S")
Partially resolves: BZ #29611
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
The AVX2 str(n)casecmp implementations use the 'bzhi' instruction, which
belongs to the BMI2 CPU feature.
NB: It also uses the 'tzcnt' BMI1 instruction, but it is executed as BSF
as BSF if the CPU doesn't support TZCNT, and produces the same result
for non-zero input.
Partially fixes: b77b06e0e2 ("x86: Optimize strcmp-avx2.S")
Partially resolves: BZ #29611
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
The "System V Application Binary Interface AMD64 Architecture Processor
Supplement" mandates the BMI1 and BMI2 CPU features for the x86-64-v3
level.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Save a jmp on the lock path coming from an initial failure in
pthread_spin_lock.S. This costs 4-bytes of code but since the
function still fits in the same number of 16-byte blocks (default
function alignment) it does not have affect on the total binary size
of libc.so (unchanged after this commit).
pthread_spin_trylock was using a CAS when a simple xchg works which
is often more expensive.
Full check passes on x86-64.
Use <support/test-driver.c> and replace pthread calls to its xpthread
equivalents.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
After upgrading glibc to Debian 2.35-1, gdb faulted on
startup and dropped core in a function call in the main
application. This was caused by not initializing the
global dp register for the main application early enough.
Restore the code to initialize dp in _dl_start_user.
It was removed when code was added to initialize dp in
elf_machine_runtime_setup.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
With GCC 13, _FloatN and _FloatNx types, when they exist, are distinct
types like they are in C with GCC 7 and later, rather than typedefs
for types such as float, double or long double.
This breaks the templated iseqsig implementation for C++ in <math.h>,
when used with types that were previously implemented as aliases. Add
the necessary definitions for _Float32, _Float64, _Float128 (when the
same format as long double), _Float32x and _Float64x in this case, so
that iseqsig can be used with such types in C++ with GCC 13 as it
could with previous GCC versions.
Also add tests for calling iseqsig in C++ with arguments of such types
(more minimal than existing tests, so that they can work with older
GCC versions and without relying on any C++ library support for the
types or on hardcoding details of their formats). The LDBL_MANT_DIG
!= 106 conditionals on some tests are because the type-generic
comparison macros have undefined behavior when neither argument has a
type whose set of values is a subset of those for the type of the
other argument, which applies when one argument is IBM long double and
the other is an IEEE format wider than binary64.
Tested with build-many-glibcs.py glibcs build for aarch64-linux-gnu
i686-linux-gnu mips-linux-gnu mips64-linux-gnu-n32 powerpc-linux-gnu
powerpc64le-linux-gnu x86_64-linux-gnu.
Use INTERNAL_SYSCALL_CALL instead of INLINE_SYSCALL_CALL. This
requires emulate the semantic for hurd call (so __arc4random_buf
uses the fallback).
Checked on x86_64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Using an unsigned type prevents the fallback to be used if kernel
does not support getrandom syscall.
Checked on x86_64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
If the compiler is new enough, enable static PIE support. In the static
PIE version of _start (in rcrt1.o), use la.pcrel instead of la.got
because in a static PIE we cannot use GOT entries until the dynamic
relocations for GOT are resolved.
Previous implementation was adjusting length (rsi) to match
bytes (eax), but since there is no bound to length this can cause
overflow.
Fix is to just convert the byte-count (eax) to length by dividing by
sizeof (wchar_t) before the comparison.
Full check passes on x86-64 and build succeeds w/ and w/o multiarch.
GCC 13 adds support for _FloatN and _FloatNx types in C++, so breaking
the installed glibc headers that assume such support is not present.
GCC mostly works around this with fixincludes, but that doesn't help
for building glibc and its tests (glibc doesn't itself contain C++
code, but there's C++ code built for tests). Update glibc's
bits/floatn-common.h and bits/floatn.h headers to handle the GCC 13
support directly.
In general the changes match those made by fixincludes, though I think
the ones in sysdeps/powerpc/bits/floatn.h, where the header tests
__LDBL_MANT_DIG__ == 113 or uses #elif, wouldn't match the existing
fixincludes patterns.
Some places involving special C++ handling in relation to _FloatN
support are not changed. There's no need to change the
__HAVE_FLOATN_NOT_TYPEDEF definition (also in a form that wouldn't be
matched by the fixincludes fixes) because it's only used in relation
to macro definitions using features not supported for C++
(__builtin_types_compatible_p and _Generic). And there's no need to
change the inline function overloads for issignaling, iszero and
iscanonical in C++ because cases where types have the same format but
are no longer compatible types are handled automatically by the C++
overload resolution rules.
This patch also does not change the overload handling for iseqsig, and
there I think changes *are* needed, beyond those in this patch or made
by fixincludes. The way that overload is defined, via a template
parameter to a structure type, requires overloads whenever the types
are incompatible, even if they have the same format. So I think we
need to add overloads with GCC 13 for every supported _FloatN and
_FloatNx type, rather than just having one for _Float128 when it has a
different ABI to long double as at present (but for older GCC, such
overloads must not be defined for types that end up defined as
typedefs for another type).
Tested with build-many-glibcs.py: compilers build for
aarch64-linux-gnu ia64-linux-gnu mips64-linux-gnu powerpc-linux-gnu
powerpc64le-linux-gnu x86_64-linux-gnu; glibcs build for
aarch64-linux-gnu ia64-linux-gnu i686-linux-gnu mips-linux-gnu
mips64-linux-gnu-n32 powerpc-linux-gnu powerpc64le-linux-gnu
x86_64-linux-gnu.
Fix the subscript on air->family, which was accidentally set to COUNT
when it should have remained as I.
Resolves: BZ #29605
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Rename atomic_exchange_rel/acq to use atomic_exchange_release/acquire
since these map to the standard C11 atomic builtins.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Otherwise, sorting based on the longest-matching prefix in
getaddrinfo can reorder the addresses in ways the test does not
expect, depending on the IPv4 address of the host.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Replace atomic_decrement_and_test with atomic_fetch_add_relaxed.
These are simple counters which do not protect any shared data from
concurrent accesses. Also remove the unused file cond-perf.c.
Passes regress on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Replace atomic_increment and atomic_increment_val with atomic_fetch_add_relaxed.
One case in sem_post.c uses release semantics (see comment above it).
The others are simple counters and do not protect any shared data from
concurrent accesses.
Passes regress on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove the 4 uses of atomic_and and atomic_or with atomic_fetch_and_acquire
and atomic_fetch_or_acquire. This is preserves existing implied semantics,
however relaxed MO on FUTEX_OWNER_DIED accesses may be correct.
Passes regress on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is used to detect errors early. The read of the oldsize is
not protected by any lock, so check this value to avoid causing
bigger mistakes.
Reviewed-by: DJ Delorie <dj@redhat.com>
The Z modifier is a nonstandard synonymn for z (that predates z
itself) and compiler might issue an warning for in invalid
conversion specifier.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The need to maintain elf/elf.h and scripts/glibcelf.py in parallel
results in a backporting hazard: they need to be kept in sync to
avoid elf/tst-glibcelf consistency check failures. glibcelf (unlike
tst-glibcelf) does not use the C implementation to extract constants.
This applies the additional glibcpp syntax checks to <elf.h>.
This changereplaces the types derived from Python enum types with
custom types _TypedConstant, _IntConstant, and _FlagConstant. These
types have fewer safeguards, but this also allows incremental
construction and greater flexibility for grouping constants among
the types. Architectures-specific named constants are now added
as members into their superclasses (but value-based lookup is
still restricted to generic constants only).
Consequently, check_duplicates in elf/tst-glibcelf has been adjusted
to accept differently-named constants of the same value if their
subtypes are distinct. The ordering check for named constants
has been dropped because they are no longer strictly ordered.
Further test adjustments: Some of the type names are different.
The new types do not support iteration (because it is unclear
whether iteration should cover the all named values (including
architecture-specific constants), or only the generic named values),
so elf/tst-glibcelf now uses by_name explicit (to get all constants).
PF_HP_SBP and PF_PARISC_SBP are now of distinct types (PfHP and
PfPARISC), so they are how both present on the Python side. EM_NUM
and PT_NUM are filtered (which was an oversight in the old
conversion).
The new version of glibcelf should also be compatible with earlier
Python versions because it no longer depends on the enum module and its
advanced features.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
We don't need RV32 specific floating point functions, instead make them
generic for RISC-V.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Both RV32 and RV64 should have the same libm-test-ulps, so consolidate
them into a single file.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
QEMU does not support support set_robust_list. Thus, we need
to enable detection of set_robust_list system call.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
It avoid a possible compiler warning where right size of operator
is converted from a negative value to unsigned.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
A new internal definition, __LIBC_LOCK_ALIGNMENT, is used to force
the 4-byte alignment only for m68k, other architecture keep the
natural alignment of the type used internally (and hppa does not
require 16-byte alignment for kernel-assisted CAS).
Reviewed-by: Florian Weimer <fweimer@redhat.com>
getent implicitly passes AI_ADDRCONFIG to getaddrinfo by default.
Use --no-addrconfig to suppress that, so that both IPv4 and IPv6
lookups succeed even if the address family is not supported by the
host.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The ahosts, ahostsv4, ahostsv6 commands unconditionally pass
AI_ADDRCONFIG to getaddrinfo, which is not always desired.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It's possible that inode numbers are outside the 32-bit range.
The existing code only handles the in-libc case correctly, and
still uses the legacy interfaces when building iconv.
Suggested-by: Helge Deller <deller@gmx.de>
The implementation in _dl_close_worker requires that the first
element of l_initfini is always this very map (“We are always the
zeroth entry, and since we don't include ourselves in the
dependency analysis start at 1.”). Rather than fixing that
assumption, this commit adds an implementation of the force_first
argument to the new dependency sorting algorithm. This also means
that the directly dlopen'ed shared object is always initialized last,
which is the least surprising behavior in the presence of cycles.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
POSIX does not say this value is special. For example, old XFS file
systems may still use inode number zero.
Also update the comment regarding ENOENT. Linux may return ENOENT
for some file systems.
Non-at functions can be implemented by just calling the corresponding at
function with AT_FDCWD and zero at_flags.
In the linkat case, the at behavior is different (O_NOLINK), so this introduces
__linkat_common to pass O_NOLINK as appropriate.
lstat functions can also be implemented with fstatat by adding
__fstatat64_common which takes a flags parameter in addition to the at_flags
parameter,
In the end this factorizes chmod, chown, link, lstat64, mkdir, readlink,
rename, stat64, symlink, unlink, utimes.
This also makes __lstat, __lxstat64, __stat and __xstat64 directly use
__fstatat64_common instead of __lstat64 or __stat64.
03ad444e8e ("mach: Fix incoherency between perror and strerror") fixesd
the output of error messages, but tst-sprintf-errno.c was still checking
the old (erroneous) format length. This updates the expected output length
according to the 03ad444e8e fix.
__syscall_error may end up farther than 1MiB away from a caller,
especially when linking statically large binaries. tail allows for
4GiB jumps and is reduced to j when a linked symbol is within range.
Fixes: 36960f0c76 ("RISC-V: Linux Syscall Interface")
Fixes: 7f33b09c65 ("RISC-V: Linux ABI")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
9e5c991106 ("hurd: Fix readlink() hanging on fifo") separated opening
the file for the stat call from opening the file for the read call. That
however opened a small window for the file to change. Better make this
atomic by reopening the file with O_READ.
