Added annotations for autovec by GCC and GFortran - this enables GCC
>= 9 to autovectorise math calls at -Ofast.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Compilers may emit calls to 'half-width' routines (two-lane
single-precision variants). These have been added in the form of
wrappers around the full-width versions, where the low half of the
vector is simply duplicated. This will perform poorly when one lane
triggers the special-case handler, as there will be a redundant call
to the scalar version, however this is expected to be rare at Ofast.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
If /tmp is mounted nosuid and make xcheck is run,
then tst-env-setuid fails UNSUPPORTED with "SGID failed: GID and EGID match"
and /var/tmp/tst-sonamemove-runmod1.so.profile is created.
If you then try to rerun the test with a suid mounted test-dir
(the SGID binary is created in test-dir which defaults to /tmp)
with something like that:
make tst-env-setuid-ENV="TMPDIR=..." t=elf/tst-env-setuid test
the test fails as the LD_PROFILE output file is still available
from the previous run.
Thus this patch removes the LD_PROFILE output file in parent
before spawning the SGID binary.
Even if LD_PROFILE is not supported anymore in static binaries,
use a different library and thus output file for tst-env-setuid
and tst-env-setuid-static in order to not interfere if both
tests are run in parallel.
Furthermore the checks in test_child are now more verbose.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When _FORTIFY_SOURCE is defined to 2, ____longjmp_chk is called,
instead of longjmp. ____longjmp_chk compares the relative stack
values to decide if it is called from a stack frame which called
setjmp. If not, ____longjmp_chk assumes that an alternate signal
stack is used. Since comparing the relative stack values isn't
reliable with user context, when there is no signal, ____longjmp_chk
will fail. Undefine _FORTIFY_SOURCE to avoid ____longjmp_chk in
user context test.
The expression
(excepts & FE_ALL_EXCEPT) << 27
produces a signed integer overflow when 'excepts' is specified as
FE_INVALID (= 0x10), because
- excepts is of type 'int',
- FE_ALL_EXCEPT is of type 'int',
- thus (excepts & FE_ALL_EXCEPT) is (int) 0x10,
- 'int' is 32 bits wide.
The patched code produces the same instruction sequence as
previosuly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It clears some exception flags that are outside the EXCEPTS argument.
It fixes math/test-fexcept on qemu-user.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
libc_feupdateenv_riscv should check for FE_DFL_ENV, similar to
libc_fesetenv_riscv.
Also extend the test-fenv.c to test fenvupdate.
Checked on riscv under qemu-system.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
According to ISO C23 (7.6.4.4), fesetexcept is supposed to set
floating-point exception flags without raising a trap (unlike
feraiseexcept, which is supposed to raise a trap if feenableexcept
was called with the appropriate argument).
The flags can be set in the 387 unit or in the SSE unit. When we need
to clear a flag, we need to do so in both units, due to the way
fetestexcept is implemented.
When we need to set a flag, it is sufficient to do it in the SSE unit,
because that is guaranteed to not trap. However, on i386 CPUs that have
only a 387 unit, set the flags in the 387, as long as this cannot trap.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
According to ISO C23 (7.6.4.4), fesetexcept is supposed to set
floating-point exception flags without raising a trap (unlike
feraiseexcept, which is supposed to raise a trap if feenableexcept
was called with the appropriate argument).
The flags can be set in the 387 unit or in the SSE unit. To set
a flag, it is sufficient to do it in the SSE unit, because that is
guaranteed to not trap. However, on i386 CPUs that have only a
387 unit, set the flags in the 387, as long as this cannot trap.
Checked on i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
According to ISO C23 (7.6.4.4), fesetexcept is supposed to set
floating-point exception flags without raising a trap (unlike
feraiseexcept, which is supposed to raise a trap if feenableexcept was
called with the appropriate argument).
This is a side-effect of how we implement the GNU extension
feenableexcept, where feenableexcept/fesetenv/fesetmode/feupdateenv
might issue prctl (PR_SET_FPEXC, PR_FP_EXC_PRECISE) depending of the
argument. And on PR_FP_EXC_PRECISE, setting a floating-point exception
flag triggers a trap.
To make the both functions follow the C23, fesetexcept and
fesetexceptflag now fail if the argument may trigger a trap.
The math tests now check for an value different than 0, instead
of bail out as unsupported for EXCEPTION_SET_FORCES_TRAP.
Checked on powerpc64le-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The loader now warns for invalid and out-of-range tunable values. The
patch also fixes the parsing of size_t maximum values, where
_dl_strtoul was failing for large values close to SIZE_MAX.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The tunable parsing duplicates the tunable environment variable so it
null-terminates each one since it simplifies the later parsing. It has
the drawback of adding another point of failure (__minimal_malloc
failing), and the memory copy requires tuning the compiler to avoid mem
operations calls.
The parsing now tracks the tunable start and its size. The
dl-tunable-parse.h adds helper functions to help parsing, like a strcmp
that also checks for size and an iterator for suboptions that are
comma-separated (used on hwcap parsing by x86, powerpc, and s390x).
Since the environment variable is allocated on the stack by the kernel,
it is safe to keep the references to the suboptions for later parsing
of string tunables (as done by set_hwcaps by multiple architectures).
Checked on x86_64-linux-gnu, powerpc64le-linux-gnu, and
aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Since GCC commit f31a019d1161ec78846473da743aedf49cca8c27 "Emit
funcall external declarations only if actually used.", the glibc
testsuite has failed to build for 32-bit SPARC with GCC mainline.
/scratch/jmyers/glibc-bot/install/compilers/sparc64-linux-gnu/lib/gcc/sparc64-glibc-linux-gnu/14.0.0/../../../../sparc64-glibc-linux-gnu/bin/ld: /scratch/jmyers/glibc-bot/install/compilers/sparc64-linux-gnu/lib/gcc/sparc64-glibc-linux-gnu/14.0.0/32/libgcc.a(_divsi3.o): in function `.div':
/scratch/jmyers/glibc-bot/src/gcc/libgcc/config/sparc/lb1spc.S:138: multiple definition of `.div'; /scratch/jmyers/glibc-bot/build/glibcs/sparcv9-linux-gnu/glibc/libc.a(sdiv.o):/scratch/jmyers/glibc-bot/src/glibc/gnulib/../sysdeps/sparc/sparc32/sparcv9/sdiv.S:13: first defined here
/scratch/jmyers/glibc-bot/install/compilers/sparc64-linux-gnu/lib/gcc/sparc64-glibc-linux-gnu/14.0.0/../../../../sparc64-glibc-linux-gnu/bin/ld: disabling relaxation; it will not work with multiple definitions
collect2: error: ld returned 1 exit status
make[3]: *** [../Rules:298: /scratch/jmyers/glibc-bot/build/glibcs/sparcv9-linux-gnu/glibc/nptl/tst-cancel24-static] Error 1
https://sourceware.org/pipermail/libc-testresults/2023q4/012154.html
I'm not sure of the exact sequence of undefined references that cause
first the glibc object file defining .div and then the libgcc object
file defining both .div and .udiv to be pulled in (which must have
been perturbed by that GCC change in a way that introduced the build
failure), but I think the failure illustrates that it's inherently
fragile for glibc to define symbols in separate object files that
libgcc defines in the same object file - and indeed for glibc to
redefine libgcc symbols at all, since the division into object files
shouldn't really be part of the interface between libgcc and libc.
These symbols appear to be in libc only for compatibility, maybe one
of the cases where they were accidentally exported from shared libc in
glibc 2.0 before the introduction of symbol versioning and so programs
started expecting shared libc to provide them. Thus, there is no need
to have them in static libc. Add this set of libgcc functions to
shared-only-routines so they are no longer provided in static libc.
(No change is made regarding .mul - dotmul source file - since unlike
the other symbols in this grouping, it doesn't actually appear to be a
libgcc symbol, at least in current GCC.)
Tested with build-many-glibcs.py for sparcv9-linux-gnu with GCC
mainline.
Verify that legacy shadow stack code in .init_array section in application
and shared library, which are marked as shadow stack enabled, will trigger
segfault.
So far if the ucontext structure was obtained by getcontext and co,
the return address was stored in general purpose register 14 as
it is defined as return address in the ABI.
In contrast, the context passed to a signal handler contains the address
in psw.addr field.
If somebody e.g. wants to dump the address of the context, the origin
needs to be known.
Now this patch adjusts getcontext and friends and stores the return address
also in psw.addr field.
Note that setcontext isn't adjusted and it is not supported to pass a
ucontext structure from signal-handler to setcontext. We are not able to
restore all registers and branching to psw.addr without clobbering one
register.
This commit uses a common implementation 'strlen-evex-base.S' for both
'strlen-evex' and 'strlen-evex512'
The motivation is to reduce the number of implementations to maintain.
This incidentally gives a small performance improvement.
All tests pass on x86.
Benchmarks were taken on SKX.
https://www.intel.com/content/www/us/en/products/sku/123613/intel-core-i97900x-xseries-processor-13-75m-cache-up-to-4-30-ghz/specifications.html
Geometric mean for strlen-evex512 over all benchmarks (N=10) was (new/old) 0.939
Geometric mean for wcslen-evex512 over all benchmarks (N=10) was (new/old) 0.965
Code Size Changes:
strlen-evex512.S : +24 bytes
wcslen-evex512.S : +54 bytes
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Since shadow stack (SHSTK) is enabled in the Linux kernel without
enabling indirect branch tracking (IBT), don't assume that SHSTK
implies IBT. Use "CPU_FEATURE_ACTIVE (IBT)" to check if IBT is active
and "CPU_FEATURE_ACTIVE (SHSTK)" to check if SHSTK is active.
Hello! I am Indonesian, was born and raised in Indonesia and still do live in
Indonesia.
This patch brings a few changes to the time locales of id_ID, which
includes :
\- Defining am_pm and time_fmpt_ampm
\- Changing time_fmt and d_t_fmt to use the 24-hour format
\- Changing first_weekday to Monday
This is a squashed version of what is previously a 5 patch set
Here are reasons and details of the changes :
Change 1 part 1
id_ID: Define `am_pm` string
Current formatting does not define am_pm string, leading to AM and PM
not being specified in 12 H time format. This change defines the string
by changing it from an empty string to "AM";"PM".
output of `date +%r`:
before commit: 01:23
after commit: 01:23 PM
Change 1 part 2
id_ID: Define time_fmt_ampm, change from an empty string
Currently, time_fmpt_ampm is set to an empty string, causing some
programs to not be able to display time in the 12-hour format, for
example, glib: https://gitlab.gnome.org/GNOME/glib/-/issues/2967.
This commit changes it from an empty string to "%I:%M:%S %p"
Change 2 part 1
id_ID: Use 24-hour format for time_fmt
Indonesian standard and formal time format uses the 24-hour format inst-
ead of the 12-hour format. This commit aims to change the id_ID locale's
time_fmt to match that accordingly.
Change 2 part 2
id_ID: Use 24-hour format for d_t_fmt.
Indonesian standard and formal time format uses the 24-hour format inst-
ead of the 12-hour format. This commit aims to change the id_ID locale's
d_t_fmt to match that accordingly.
Change 3
id_ID: Change first_weekday to monday
Indonesian calendar starts of the week with Monday, let's comply
Message-ID: <20230821035530.9075-1-rushing27alien@gmail.com>
Resolves: BZ # 30412
Reviewed-by: Mike Fabian <mfabian@redhat.com>
This patch reserves space for HWCAP3/HWCAP4 in the TCB of powerpc.
These hardware capabilities bits will be used by future Power
architectures.
Versioned symbol '__parse_hwcap_3_4_and_convert_at_platform' advertises
the availability of the new HWCAP3/HWCAP4 data in the TCB.
This is an ABI change for GLIBC 2.39.
Suggested-by: Peter Bergner <bergner@linux.ibm.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
Current implementation of strcmp for power10 has
performance regression for multiple small sizes
and alignment combination.
Most of these performance issues are fixed by this
patch. The compare loop is unrolled and page crosses
of unrolled loop is handled.
Thanks to Paul E. Murphy for helping in fixing the
performance issues.
Signed-off-by: Amrita H S <amritahs@linux.vnet.ibm.com>
Co-Authored-By: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
Optimized memchr for POWER10 based on existing rawmemchr and strlen.
Reordering instructions and loop unrolling helped in getting better performance.
Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
The previous commit was incomplete: gettext() still returns a translation
if the file /usr/share/locale/C/LC_MESSAGES/<domain>.mo exists. This patch
prohibits the translation also in this case.
* gettext-runtime/intl/dcigettext.c (DCIGETTEXT): Treat C.<encoding> locale
like the C locale.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
After refactoring the alloca usage in 40c0add7d4 ("resolve: Remove
__res_context_query alloca usage") a few unaligned accesses to HEADER
fields surfaced. These unaligned accesses led to problems when running
the resolv test suite on sparc32-linux (leon) as many tests failed due to
SIGBUS crashes.
The issue(s) occured during T_QUERY_A_AND_AAAA queries as the second query
now can start on an unaligned address (previously it was explicitly aligned).
With this patch the unaligned accesses are now fixed by using the
UHEADER instead to ensure the fields are accessed with byte
loads/stores.
The patch has been verfied by running the resolv test suite on sparc32
and x86_64.
Signed-off-by: Ludwig Rydberg <ludwig.rydberg@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The PT_GNU_PROPERTY segment is scanned before PT_NOTE. For binaries
with the PT_GNU_PROPERTY segment, we can check it to avoid scan of
the PT_NOTE segment.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
GLRO(dl_lazy) is used to set the parameters for the early
_dl_relocate_object call, so the consider_profiling setting has to
be applied before the call.
Fixes commit 78ca44da01 ("elf: Relocate
libc.so early during startup and dlmopen (bug 31083)").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
One of the requirements to becoming a CVE Numbering Authority (CNA) is
to publish advisories. Do this by maintaining a file for each CVE fixed
in the advisories directory in the source tree. Links to the advisories
can then be shared as:
https://sourceware.org/git/?p=glibc.git;a=blob_plain;f=advisories/GLIBC-SA-YYYY-NNNN
The file format at the moment is rudimentary and derives from the git
commit format, i.e. a subject line and a potentially multi-paragraph
description and then tags to describe some meta information. This is a
loose format at the moment and could change as we evolve this.
Also add a script process-fixed-cves.sh that processes these advisories
and generates a list to add to NEWS at release time.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch is based on __strcmp_power9 and __strlen_power10.
Improvements from __strcmp_power9:
1. Uses new POWER10 instructions
- This code uses lxvp to decrease contention on load
by loading 32 bytes per instruction.
2. Performance implication
- This version has around 30% better performance on average.
- Performance regression is seen for a specific combination
of sizes and alignments. Some of them is observed without
changes also, while rest may be induced by the patch.
Signed-off-by: Amrita H S <amritahs@linux.vnet.ibm.com>
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
It splits between process_envvars_secure and process_envvars_default,
with the former used to process arguments for __libc_enable_secure.
It does not have any semantic change, just simplify the code so there
is no need to handle __libc_enable_secure on each len switch.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
To avoid any environment variable to change setuid binaries
semantics.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Loader already ignores LD_DEBUG, LD_DEBUG_OUTPUT, and
LD_TRACE_LOADED_OBJECTS. Both LD_WARN and LD_VERBOSE are similar to
LD_DEBUG, in the sense they enable additional checks and debug
information, so it makes sense to disable them.
Also add both LD_VERBOSE and LD_WARN on filtered environment variables
for setuid binaries.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Call the document a "Security Policy" to disambiguate it from the
security *process* documented in the security page. Also, point to the
security page for bug reporting and CVE assignment.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The .cfi_return_column directive changes the return column for the whole
FDE range. But the actual intent is to tell the unwinder that the value
in x30 (lr) now resides in x15 after the move, and that is expressed by
the .cfi_register directive.
