Since gettimeofday will shortly be implemented in terms of
clock_gettime on all platforms, internal code should use clock_gettime
directly; in addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday. (We can't
quite do that yet, but it'll be coming later in this patch series.)
In many cases, the changed code does fewer conversions.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
cannot fail. Most of the call sites were assuming gettimeofday could
not fail, but a few places were checking for errors. POSIX says
clock_gettime can only fail if the clock constant is invalid or
unsupported, and CLOCK_REALTIME is the one and only clock constant
that's required to be supported. For consistency I grepped the entire
source tree for any other places that checked for errors from
__clock_gettime (CLOCK_REALTIME), found one, and changed it too.
(For the record, POSIX also says gettimeofday can never fail.)
(It would be nice if we could declare that GNU systems will always
support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several
places where we are using CLOCK_REALTIME where _MONOTONIC would be
more appropriate, and/or trying to use _MONOTONIC and then falling
back to _REALTIME. But the Hurd doesn't support CLOCK_MONOTONIC yet,
and it looks like adding it would involve substantial changes to
gnumach's internals and API. Oh well.)
A few Hurd-specific files were changed to use __host_get_time instead
of __clock_gettime, as this seemed tidier. We also assume this cannot
fail. Skimming the code in gnumach leads me to believe the only way
it could fail is if __mach_host_self also failed, and our
Hurd-specific code consistently assumes that can't happen, so I'm
going with that.
With the exception of support/support_test_main.c, test cases are not
modified, mainly because I didn't want to have to figure out which
test cases were testing gettimeofday specifically.
The definition of GETTIME in sysdeps/generic/memusage.h had a typo and
was not reading tv_sec at all. I fixed this. It appears nobody has been
generating malloc traces on a machine that doesn't have a superseding
definition.
There are a whole bunch of places where the code could be simplified
by factoring out timespec subtraction and/or comparison logic, but I
want to keep this patch as mechanical as possible.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Linux/Alpha has two versions of several system call wrappers that take
or return data of type "struct timeval" (possibly nested inside a
larger structure). The GLIBC_2.0 version is a compat symbol that
calls __NR_osf_foo or __NR_old_foo and uses a struct timeval with a
32-bit tv_sec field. The GLIBC_2.1 version is used for current code,
calls __NR_foo, and uses a struct timeval with a 64-bit tv_sec field.
This patch changes all of the compat symbols of this type to be
wrappers around their GLIBC_2.1 counterparts; the compatibility system
calls will no longer be used. It serves as a proposal for part of how
we do the transition to 64-bit time_t on systems that currently use
32-bit time_t:
* The patched glibc will NOT use system calls that involve 32-bit
time_t to implement its compatibility symbols. This will make both
our lives and the kernel maintainers' lives easier. The primary
argument I've seen against it is that the kernel could warn about
uses of the old system calls, helping people find old binaries that
need to be recompiled. I think there are several other ways we
could accomplish this, e.g. scripts to scan the filesystem for
binaries with references to the old symbol versions, or issuing
diagnostics ourselves.
* The compat symbols do NOT report failure after the Y2038 deadline.
An earlier revision of this patch had them return -1 and set errno
to EOVERFLOW, but Adhemerval pointed out that many of them have
already performed side effects at the point where we discover the
overflow, so that would break more than it fixes. Also, we don't
want people to be _checking_ for EOVERFLOW from these functions; we
want them to recompile with 64-bit time_t. So it's not actually
useful for them to report failure to the calling code.
* What they do do, when they encounter overflow, is saturate the
overflowed "struct timeval"(s): tv_sec is set to INT32_MAX and
tv_nsec is set to 999999. That means time stops advancing for
programs with 32-bit time_t when they reach the deadline. That's
obviously going to break stuff, but I think wrapping around is
probably going to break _more_ stuff. I'd be interested to hear
arguments against, if anyone has one.
The new header file tv32-compat.h is currently Alpha-specific but I
mean for it to be reused to aid in writing wrappers for all affected
architectures. I only put it in sysdeps/unix/sysv/linux/alpha for now
because I haven't checked whether the various "foo32" structures it
defines agree with the ABI for ports other than Linux/Alpha.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In commit 4b7c74179c the nsswitch.conf
file was harmonized with downstream distributions, but this change
included adding "initgroups: files". We should not add initgroups by
default, we can have it, but it should be commented out to allow it
to inherit the settings for group. The problem is principally that
downstream authconfig won't update initgroups and it will get out of
sync with the setting for group.
This patch provides new __clock_getres64 explicit 64 bit function for
getting the resolution (precision) of specified clock ID. Moreover, a
32 bit version - __clock_getres has been refactored to internally use
__clock_getres64.
The __clock_getres is now supposed to be used on systems still supporting
32 bit time (__TIMESIZE != 64) - hence the necessary conversion from 64 bit
struct __timespec64 to struct timespec.
The new clock_getres_time64 syscall available from Linux 5.1+ has been used,
when applicable.
On systems which are not supporting clock_getres_time64 (as their
clock_getres supports 64 bit time ABI) the vDSO syscall is attempted.
On the contrary the non-vDSO syscall is used for clock_getres_time64 as
up till now the kernel is not providing such interface.
No additional checks (i.e. if tv_nsec value overflow) are performed on
values returned via clock_getres{_time64} syscall, as it is assumed that
the Linux kernel will either return 0 and provide correct value or error.
The check for tv_sec being out of range on systems still supporting 32 bit
time (__TIMESIZE != 64) without Y2038 time support is also omitted as it is
_very_ unlikely that we would have a timer with resolution which exceeds 32
bit time_t range.
Build tests:
- The code has been tested on x86_64/x86 (native compilation):
make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8"
- The glibc has been build tested (make PARALLELMFLAGS="-j8") for
x86 (i386), x86_64-x32, and armv7
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
- Use of cross-test-ssh.sh for ARM (armv7):
make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck
Linux kernel, headers and minimal kernel version for glibc build test
matrix:
- Linux v5.1 (with clock_getres_time64) and glibc build with v5.1 as
minimal kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports
clock_getres_time64 syscall.
- Linux v4.19 (no clock_getres_time64 support) with default minimal kernel
version for contemporary glibc
This kernel doesn't support clock_getres_time64 syscall, so the fallback
to clock_getres is tested.
The above tests were performed with Y2038 redirection applied as well as
without (so the __TIMESIZE != 64 execution path is checked as well).
No regressions were observed.
The valid_nanoseconds () static inline function has been introduced to
check if nanoseconds value is in the correct range - greater or equal to
zero and less than 1000000000.
The explicit #include <time.h> has been added to files where it was
missing.
The __syscall_slong_t type for ns has been used to avoid issues on x32.
Tested with:
- scripts/build-many-glibcs.py
- make PARALLELMFLAGS="-j12" && make PARALLELMFLAGS="-j12" xcheck on x86_64
This commit adds previously missing transliterations for several code points
in the Unicode blocks "Miscellaneous Mathematical Symbols-A/B" -
transliterated to their approximate ASCII representations. It also adds a
corresponding iconv transliteration test.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The testroot does not have a gunzip command, so the charmap files
should not be installed gzipped else they cannot be used (and thus
tested). With this patch, installing with INSTALL_UNCOMPRESSED=yes
installs uncompressed charmaps instead.
Note that we must purge the $(symbolic_link_list) as it contains
references to $(DESTDIR), which we change during the testroot
installation.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If WAIT_FOR_DEBUGGER is set to a non-zero value in the environment,
any test that runs will print some useful gdb information and wait
for gdb to attach to it and clear the "wait_for_debugger" variable.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add a new macro __STATFS_MATCHES_STATFS64 that specifies if fsblkcnt_t
matches fsblkcnt64_t and if fsfilcnt_t matches fsfilcnt64_t.
As we don't have the padding we also need to update the overflow checker
to not access the undefined members.
Commit 95c1056962 ("elf: Use nocancel
pread64() instead of lseek()+read()") added calls to __pread64 to
the dynamic loader. On Hurd, this needs an implementation in the
dynamic loader because the rtld-pread64 rebuild pulls in too many
symbols.
Fixes: 95c1056962
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
On a 32-bit platform with a 64-bit ino_t type (__INO_T_MATCHES_INO64_T
defined) we want to update the stat struct to remove the padding as it
isn't required. As we don't have the padding we also need to update the
overflow checker to not access the undefined members.
As an svc invocation does not clobber any user space registers
despite of the return value r2 and it does not need a special
stack frame. This patch gets rid of the extra frame.
We just have to save and restore r6 and r7 as those are
preserved across function calls.
This patch addresses an issue reported in
<https://sourceware.org/ml/libc-alpha/2019-07/msg00661.html> where the
creation of testroot.pristine, on encountering
LD_TRACE_LOADED_OBJECTS=1 of the form
libc.so.6 => /scratch/jmyers/glibc/mbs/obj/glibc-8-0-mips64-linux-gnu-x86_64-linux-gnu/default/libc.so.6 (0x772dd000)
/lib32/ld.so.1 => /scratch/jmyers/glibc/mbs/obj/glibc-8-0-mips64-linux-gnu-x86_64-linux-gnu/default/elf/ld.so.1 (0x7747b000)
tries to copy /lib32/ld.so.1 (which does not exist) into the testroot
instead of copying the path on the RHS of "=>", which does exist,
because the Makefile logic assumes that the path on such a line with
'/' should be copied, when if there are such paths on both the LHS and
the RHS of "=>", only the one on the RHS necessarily exists and so
only that should be copied. The patch follows the approach suggested
by DJ in <https://sourceware.org/ml/libc-alpha/2019-07/msg00662.html>,
with the suggestion from Andreas in
<https://sourceware.org/ml/libc-alpha/2019-10/msg00514.html> of a
single sed command in place of pipeline of grep and three sed
commands.
Tested for x86_64, with and without --enable-hardcoded-path-in-tests;
a previous version with multiple sed commands, implementing the same
logic, also tested for MIPS, with and without
--enable-hardcoded-path-in-tests, to confirm it fixes the original
problem.
Co-authored-by: DJ Delorie <dj@redhat.com>
Remove _finite tests and references from x86_64. Rather than calling
__exp_finite, use exp directly (since it's the same entry point).
x86_64 builds and passes testsuite.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove the finite-math tests from the testsuite - these are no longer
useful after removing math-finite.h header.
Passes buildmanyglibc, build&test on x86_64 and AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The rewritten clock_settime code (which now supports 64 bit time on systems
with __WORDSIZE == 32) for Linux now relies on the
__ASSUME_TIME64_SYSCALLS flag set.
Lets explicitly include the header file where it is defined to avoid
any indirect inclusion (which may pose some unwanted API definitions).
Tested with scripts/build-many-glibcs.py script.
_nl_load_locale_from_archive() checks for a zero size, but
divides by both (size) and (size-2). Extend the check to
guard against a size of two or less.
Tested by manually corrupting locale-archive and running a program
that calls setlocale() with LOCPATH unset (size is typically very
large).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I had a local commit fed33b0fb0 which crossed the boundary
between when we had and didn't have ChangeLog's and this
caused me to have an odd behaviour with the file rename,
despite cleaning up the original ChangeLog changes.
Sorry. Corrected now.
Document in comments that __pthread_enable_asynccancel and
__pthread_disable_asynccancel must be AS-safe in general with
the exception of the act of cancellation.
This is in preparation for changes in the dynamic linker so that
pread() is used instead of lseek()+read().
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Adds "make test" for re-running just one test. Also adds
"make help" for help with our Makefile targets, and adds a
mini-help when you just run "make".
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 5.1 adds missing SySV IPC syscalls to the syscall table for
remanining one that still uses the ipc syscall on glibc (m68k, mips-o32,
powerpc, s390, sh, and sparc32). However the newly added direct ipc
syscall are different than the old ones:
1. They do not expect IPC_64, meaning __IPC_64 should be set to zero
when new syscalls are used. And new syscalls can not be used
for compat functions like __old_semctl (to emulated old sysvipc it
requires to use the old __NR_ipc syscall without __IPC_64).
Thus IPC_64 is redefined for newer kernels on affected ABIs.
2. semtimedop and semop does not exist on 32-bit ABIs (only
semtimedop_time64 is supplied). The provided syscall wrappers only
uses the wire-up syscall if __NR_semtimedop and __NR_semop are
also defined.
Checked on x86_64-linux-gnu and i686-linux-gnu on both a 4.15 kernel
configure with default options and sysvipc tests on a 5.3.0 kernel with
--enable-kernel=5.1.
Tested-by: Paul A. Clarke <pc@us.ibm.com>
All nptl targets have these signal definitions nowadays. This
changes also replaces the nptl-generic version of pthread_sigmask
with the Linux version.
Tested on x86_64-linux-gnu and i686-linux-gnu. Built with
build-many-glibcs.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Besides semop being a subset of semtimedop, new 32-bit architectures
on Linux are not expected to provide the syscall (only the 64-bit time
semtimedop).
Also, Linux 5.1 only wired-up semtimedop for the 64-bit architectures
that missed it (powerpc, s390, and sparc). This simplifies the code
to support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This patch refactor the internal sysvipc in two main points:
1. Add a new __ASSUME_SYSVIPC_DEFAULT_IPC_64 to infer the __IPC_64
value to be used along either the multiplexed __NR_ipc or wired-up
syscall. The defaut value assumed for __IPC_64 is also changed
from 0x100 to 0x0, aligning with Linux generic UAPI. The idea
is to simplify the Linux 5.1 wire-up for sysvipc syscalls for
some 32-bit ABIs (which expectes __IPC_64 being 0x0) and simplify
new ports (which will no longer need to add ipc_priv.h).
2. It also removes some duplicated internal definition used on compat
sysvipc symbols defined at ipc_priv.h (more specifically the
__old_ipc_perm, SEMCTL_ARG_ADDRESS, MSGRCV_ARGS, and
SEMTIMEDOP_IPC_ARGS). The idea is also to make it simpler to enable
the new wire-up sysvipc syscall provided by Linux v5.1.
There is no semantic change expected on any port. Checked with a build
against all affected ABIs.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
From the beginning, elf/tst-dlopen-aout has exercised two different
bugs: (a) failure to report errors for a dlopen of the executable
itself in some cases (bug 24900) and (b) incorrect rollback of the
TLS modid allocation in case of a dlopen failure (bug 16634).
This commit replaces the test with elf/tst-dlopen-self for (a) and
elf/tst-dlopen-tlsmodid for (b). The latter tests use the
elf/tst-dlopen-self binaries (or iconv) with dlopen, so they are
no longer self-dlopen tests.
Tested on x86_64-linux-gnu and i686-linux-gnu, with a toolchain that
does not default to PIE.
Linux 5.3 adds a PTRACE_GET_SYSCALL_INFO constant, with an associated
structure and PTRACE_SYSCALL_INFO_* constants.
This patch adds these to sys/ptrace.h in glibc
(PTRACE_GET_SYSCALL_INFO in each architecture version, the rest in
bits/ptrace-shared.h). As with previous such constants and associated
structures, the glibc version of the structure is named struct
__ptrace_syscall_info.
Tested for x86_64, and with build-many-glibcs.py.
The warning is confusing to those who do not understand the context,
and the warning is easy to misunderstand:
A reader needs to know that it was written by someone who is generally
skeptical of government influence and control, otherwise it reads as
an affirmation of the U.S. government's role as the ultimate editor of
the manual. This is precisely the opposite of what the warning
intends to convey. (Reportedly, it criticizes that several
U.S. administrations have tried to restrict the medical advice that
U.S.-funded health care workers can provide abroad, considering that
censorship.)
The warning is also misleading on a technical level. A reader who
makes the connection to pregnancy termination will get the wrong
impression that calling the abort function will terminate subprocesses
of the current process, but this is not what generally happens.
Finally, for both GNU and the FSF, it is inappropriate to use female
reproductive health as mere joke material, since these organizations
do not concern themselves with such issues otherwise, and the warning
is purportedly about something else entirely.
This reinstates commit 340d9652b9
("manual/startup.texi (Aborting a Program): Remove inappropriate
joke."), effectively reverting the revert in commit
ffa81c22a3 ("Revert:").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch sets the mode field in ipc_perm as mode_t for all architectures,
as POSIX specification [1]. The changes required are as follow:
1. It moves the ipc_perm definition out of ipc.h to its own header
ipc_perm.h. It also allows consolidate the IPC_* definition on
only one header.
2. The generic implementation follow the kernel ipc64_perm size so the
syscall can be made directly without temporary buffer copy. However,
since glibc defines the MODE field as mode_t, it omits the __PAD1 field
(since glibc does not export mode_t as 16-bit for any architecture).
It is a two-fold improvement:
2.1. New implementation which follow Linux UAPI will not need to
provide an arch-specific ipc-perm.h header neither wrongly
use the wrong 16-bit definition from previous default ipc.h
(as csky did).
2.1. It allows consolidate ipc_perm definition for architectures that
already provide mode_t as 32-bit.
3. All kernel ABIs for the supported architectures already provides the
expected padding for mode type extension to 32-bit. However, some
architectures the padding has the wrong placement, so it requires
the ipc control routines (msgctl, semctl, and shmctl) to adjust the
mode field accordingly. Currently they are armeb, microblaze, m68k,
s390, and sheb.
A new assume is added, __ASSUME_SYSVIPC_BROKEN_MODE_T, which the
required ABIs define.
4. For the ABIs that define __ASSUME_SYSVIPC_BROKEN_MODE_T, it also
require compat symbols that do not adjust the mode field.
Checked on arm-linux-gnueabihf, aarch64-linux-gnu, powerpc64le-linux-gnu,
and x86_64-linux-gnu. I also checked the sysvipc tests on hppa-linux-gnu,
sh4-linux-gnu, s390x-linux-gnu, and s390-linux-gnu.
I also did a sanity test against armeb qemu usermode for the sysvipc
tests.
[BZ #18231]
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
bits/ipc-perm.h.
* sysdeps/unix/sysv/linux/aarch64/bits/ipc.h: Remove file.
* sysdeps/unix/sysv/linux/alpha/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__BYTE_ORDER == __BIG_ENDIAN] (__ASSUME_SYSVIPC_BROKEN_MODE_T):
Define.
* sysdeps/sysv/linux/microblaze/kernel-features.h: Likewise.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
[!__s390x__] (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_SYSVIPC_BROKEN_MODE_T): Define.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h: Likewise.
* sysdeps/unix/sysv/linux/bits/ipc-perm.h: New file.
* sysdeps/unix/sysv/linux/powerpc/bits/ipc-perm.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/ipc-perm.h: Likewise.
* sysdeps/unix/sysv/linux/bits/ipc.h (ipc_perm): Move to
bits/ipc-perm.h.
* sysdeps/unix/sysv/linux/hppa/bits/ipc-perm.h: New file.
* sysdeps/unix/sysv/linux/kernel-features.h: Add comment about
__ASSUME_SYSVIPC_BROKEN_MODE_T semantic.
* sysdeps/unix/sysv/linux/msgctl.c (DEFAULT_VERSION): Define as
2.31 if __ASSUME_SYSVIPC_BROKEN_MODE_T is defined.
(msgctl_syscall, __msgctl_mode16): New symbol.
(__new_msgctl): Add bits for __ASSUME_SYSVIPC_BROKEN_MODE_T.
* sysdeps/unix/sysv/linux/semctl.c: Likewise.
* sysdeps/unix/sysv/linux/shmctl.c: Likewise.
* sysdeps/unix/sysv/linux/arm/be/libc.abilist (GLIBC_2.31): Add
msgctl, semctl, and shmctl.
* sysdeps/sysv/linux/microblaze/be/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/be/libc.abilist: Likewise.
* conform/data/sys/ipc.h-data: Only xfail {struct ipc_perm} mode_t
mode for Hurd.
* sysdeps/unix/sysv/linux/m68k/Versions (libc) [GLIBC_2.31]: Add
msgctl, semctl, and shmctl.
* sysdeps/unix/sysv/linux/arm/be/Versions: New file.
* sysdeps/unix/sysv/linux/microblaze/be/Versions: Likewise.
* sysdeps/unix/sysv/linux/sh/be/Versions: Likewise.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_ipc.h.html
This patch provides new __clock_settime64 explicit 64 bit function for
setting the time. Moreover, a 32 bit version - __clock_settime - has been
refactored to internally use __clock_settime64.
The __clock_settime is now supposed to be used on systems still supporting
32 bit time (__TIMESIZE != 64) - hence the necessary conversion to 64 bit
struct timespec.
The new clock_settime64 syscall available from Linux 5.1+ has been used,
when applicable.
In this patch the internal padding (tv_pad) of struct __timespec64 is
left untouched (on systems with __WORDSIZE == 32) as Linux kernel ignores
upper 32 bits of tv_nsec.
Build tests:
- The code has been tested on x86_64/x86 (native compilation):
make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8"
- The glibc has been build tested (make PARALLELMFLAGS="-j8") for
x86 (i386), x86_64-x32, and armv7
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
- Use of cross-test-ssh.sh for ARM (armv7):
make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck
Linux kernel, headers and minimal kernel version for glibc build test
matrix:
- Linux v5.1 (with clock_settime64) and glibc build with v5.1 as minimal
kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports
__clock_settime64 syscalls.
- Linux v4.19 (no clock_settime64 support) with default minimal kernel
version for contemporary glibc
This kernel doesn't support __clock_settime64 syscalls, so the fallback
to clock_settime is tested.
The above tests were performed with Y2038 redirection applied as well as
without (so the __TIMESIZE != 64 execution path is checked as well).
No regressions were observed.
* include/time.h (__clock_settime64):
Add __clock_settime alias according to __TIMESIZE define
* sysdeps/unix/sysv/linux/clock_settime.c (__clock_settime):
Refactor this function to be used only on 32 bit machines as a wrapper
on __clock_settime64.
* sysdeps/unix/sysv/linux/clock_settime.c (__clock_settime64): Add
* sysdeps/unix/sysv/linux/clock_settime.c (__clock_settime64):
Use clock_settime64 kernel syscall (available from 5.1+ Linux)
This patch replaces the fork+exec by posix_spawn on wordexp, which
allows a better scability on Linux and simplifies the thread
cancellation handling.
The only change which can not be implemented with posix_spawn the
/dev/null check to certify it is indeed the expected device. I am
not sure how effetive this check is since /dev/null tampering means
something very wrong with the system and this is the least of the
issues. My view is the tests is really out of the place and the
hardening provided is minimum.
If the idea is still to provide such check, I think a possibilty
would be to open /dev/null, check it, add a dup2 file action, and
close the file descriptor.
Checked on powerpc64le-linux-gnu and x86_64-linux-gnu.
* include/spawn.h (__posix_spawn_file_actions_addopen): New
prototype.
* posix/spawn_faction_addopen.c (posix_spawn_file_actions_addopen):
Add internal alias.
* posix/wordexp.c (create_environment, free_environment): New
functions.
(exec_comm_child, exec_comm): Use posix_spawn instead of fork+exec.
* posix/wordexp-test.c: Use libsupport.
This patch changes how the fallback getdents64 implementation calls
non-LFS getdents by replacing the scratch_buffer with static buffer
plus a loop on getdents calls. This avoids the potential malloc
call on scratch_buffer_set_array_size for large input buffer size
at the cost of more getdents syscalls.
It also adds a small optimization for older kernels, where the first
ENOSYS failure for getdents64 disable subsequent calls.
Check the dirent tests on a mips64-linux-gnu with getdents64 code
disabled.
* sysdeps/unix/sysv/linux/mips/mips64/getdents64.c (__getdents64):
Add small optimization for older kernel to avoid issuing
__NR_getdents64 on each call and replace scratch_buffer usage with
a static allocated buffer.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Originally the public interface for getdents64 was declared in
<unistd.h> in 51ea67d548. Later, b8b3d5a14e moved it to <dirent.h>.
Fixes: b8b3d5a14e ("Linux: Move getdents64 to <dirent.h>")
Building the test cases in parallel might make tst-strftime2 and
tst-strftime3 fail. Simply re-running the test case (or building
serially) makes the problem go away. This patch adds the necessary
dependency to allow parallel builds in the time subdirectory.
Tested for powerpc64le.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
